Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    1500 Ing

    Uploaded by

    Ahmad
    The document provides technical specifications for the TETRA - TD 1500 HYDROLIC CORE DRILL. It has a 380 HP diesel engine and hydraulic system with main and secondary pumps. The drill mast can feed at speeds up to 44 m/min to depths of 2000 meters and drill holes from 60 to 122.6 mm. It is equipped with a hydraulic drill chuck and rod holder. Additional features include a crawler undercarriage, mud pumps, lighting, and controls. The machine weighs 10,500 kg and is manufactured in Ankara, Turkey by TETRA MAKINE which has over 30 years of experience building drilling equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1500 Ing

    Uploaded by

    Ahmad
    13 views10 pages
    The document provides technical specifications for the TETRA - TD 1500 HYDROLIC CORE DRILL. It has a 380 HP diesel engine and hydraulic system with main and secondary pumps. The drill mast can feed at speeds up to 44 m/min to depths of 2000 meters and drill holes from 60 to 122.6 mm. It is equipped with a hydraulic drill chuck and rod holder. Additional features include a crawler undercarriage, mud pumps, lighting, and controls. The machine weighs 10,500 kg and is manufactured in Ankara, Turkey by TETRA MAKINE which has over 30 years of experience building drilling equipment.

    Original Description:

    Tetra 1500

    Original Title

    1500_ing

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical specifications for the TETRA - TD 1500 HYDROLIC CORE DRILL. It has a 380 HP diesel engine and hydraulic system with main and secondary pumps. The drill mast can feed at speeds up to 44 m/min to depths of 2000 meters and drill holes from 60 to 122.6 mm. It is equipped with a hydraulic drill chuck and rod holder. Additional features include a crawler undercarriage, mud pumps, lighting, and controls. The machine weighs 10,500 kg and is manufactured in Ankara, Turkey by TETRA MAKINE which has over 30 years of experience building drilling equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views10 pages

    1500 Ing

    Uploaded by

    Ahmad
    The document provides technical specifications for the TETRA - TD 1500 HYDROLIC CORE DRILL. It has a 380 HP diesel engine and hydraulic system with main and secondary pumps. The drill mast can feed at speeds up to 44 m/min to depths of 2000 meters and drill holes from 60 to 122.6 mm. It is equipped with a hydraulic drill chuck and rod holder. Additional features include a crawler undercarriage, mud pumps, lighting, and controls. The machine weighs 10,500 kg and is manufactured in Ankara, Turkey by TETRA MAKINE which has over 30 years of experience building drilling equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    TETRA - TD 1500

    HYDROLIC CORE DRILL

    TECHNICAL CATALOG

    www.tetramakine.com

    www.tetramakine.com
    GENERAL
    TD TETRA close to 30 years experience in the sector with the best in Turkey, is one of
    the world's top three machine tool builder. All of the machines are operator friendly and easy
    to use. TD TETRA MAKİNE does not use any brand or product of Far East origin in any of its
    products.Unlike other companies, many optional features are available as standard, and are
    produced by keeping fuel and spare parts economy at the forefront. When many factors such
    as operating costs, drilling speeds, spare parts and fuel economy, ease of use come together,
    TD TETRA machines are the choice of enterprises and the companies whose machine parks are
    only TD TETRA's become our biggest reference.

    TECHNICIAL SPECIFICATIONS

    ENGINE

    TYPE DİZEL

    MODEL FORD ECOTORQ EURO 6

    KW 283

    HP 380

    ENGINE SPEED 1800(ADJUSTABLE)

    COOLING WATER AND INTERCOOLER

    HYDRAULIC POWER UNIT

    MAIN PUMP MAX. (KAWASAKI 112 CC) 112cc@ 2200rpm@320 BAR - 246 LT/MIN

    SECOND PUMP MAX.(REXROTH 45 CC) 45cc @ 2700rpm@320 BAR - 121 LT/MIN

    SERVICE PUMP MAX.(REXROTH 28 CC) 28cc @ 3000rpm @320 BAR - 84 LT/MIN

    OIL COOLING FAN COOLER

    www.tetramakine.com
    MAIN HOIST

    SINGLE LINE CAPACITY 9070 KG (REXROTH 80 CC)

    LINE SPEED MAX. 44 M/MIN

    CABLE SIZE 25-50 M 16-18-20 MM

    WIRELINE

    CAPACITY 6MM LINE- 2500 M

    LINE SPEED MAX. 300 M/MIN

    LINE SPEED(LOWER) MAX. 250 M/MIN

    www.tetramakine.com
    MAST SYSTEM

    FEEDING LENGTH 3,5 M

    DRILLING ANGLE 45 TO 90

    ROD PULL CAPACITY 6,3 M

    POSITIONING FOR MAST HYDRAULIC

    FEEDING FORCE 8000 KG - 15700 KG

    FEEDING SPEED SPEED KONTROL PANEL(FAST AND SLOW)


    ROTATION UNIT
    MAX. (rpm) MAX. TORQUE (Nm)
    SPEED TRANSFORMATION (Vgmax/Vgmin) (Vgmax/Vgmin)
    4997/3398*
    1 ST 6.27:1 135/199 6828/4646**
    2487/1691*
    2 ND 3.12:1 272/400 3397/2311**
    1395/949*
    3 RD 1.75:1 485/714 1905/1296**
    797/542*
    4 TH 1;1 850/1250 1089/741**

    RATIO 2;1

    *Ƞmh(hydro mechanical efficiency):0.9 and working pressure is calculated as 260 bar.

    **Ƞmh(hydro mechanical efficiency):1 and working pressure is calculated as 350 bar.


    The size of the hole corresponds to the diameter of the PQ tie-rod body, equipped with a
    case spring and rotating proportional control. The self-lubricated mechanical drive 4-speed rotor
    is operated through the hydraulic motor with alternating load. Data presented above is based on
    the assumption of operating a diesel engine with a constant speed of 1800 RPM.

    www.tetramakine.com
    DRILL CHUCK JAW

    TYPE HYDRAULIC

    MAX.INSIDE DIAMETER 117,5 MM

    HOLDING CAPACITY 19000 KG

    ROD HOLDER

    TYPE DOUBLE HYDRAULIC PISTON

    MAX.INSIDE DIAMETER 150 MM

    HOLDING CAPACITY 20000 KG

    DRILLING CAPACITY
    DRILLING ROD
    DIAMETER BWL NWL HWL PWL
    FINAL HOLE
    DIAMETER (MM) 60 75,7 96 122,6

    DEPTH (M) 2000 1500 1000 600


    Drilling depths are given for vertical drilling in homogeneous ground to give an idea.

    CRAWLER UNDERCARIAGE

    TYPE GERMAN OR ITALIAN (STEEL)

    TRACK WIDTH 400 MM

    TRACK LENGTH 2797 MM

    TRAVEL SPEED DOUBLE SPEED 1,07 -2,05 KM/S

    LIFTING UP 4 HYDRAULIC PISTON

    www.tetramakine.com
    MUD/WATER PUMP

    TYPE HYDRAULIC WITH THE MACHINE (FCM)

    CAPACITY 130-240 L/MIN (ADJUSTABLE)

    MAX. PRESSURE 60-120 BAR

    www.tetramakine.com
    MACHINE DIMENSIONS

    MACHINE WEIGHT
    MAST STROKE MAİN HOİST HİGHT MAST LENGTH MAST SLİDİNG
    LENGTH STROKE

    3500 MM 5510 MM 9300 MM 2650 MM

    WEIGHT 10500 KG

    www.tetramakine.com
    STANDARD FEATURES

    TWO SECTION FOLDING S

    MAST REELS S

    SAFETY SHEETS S

    HİGH TORQUE GEAR S


    4 PİECES HYDRAULİC PLUNGER-TYPE
    LEG MEMBERS S

    TRPLEX MUD PUMP S

    FUEL TANK 250 LT S

    OIL TANK 400 LT S

    OIL COOLER WITH FAN S

    EQUIPMENT CABINET S

    HYDRAULİC MUD MİXER S

    POSITIONING FOR MAST S

    ROD HOLDER S

    DRILL CHUCK JAW (UPPER JAW)


    S

    BATTERY CABINET S

    SLIDING MUD PUMP HOUSING S

    HYDRAULIC WIRELINE S

    CRAWLER UNDERCARIAGE S

    TIJ REMOVAL TOOL HYDRAULIC O

    EXTRA FUEL FILTER S

    TACHOMETER S

    www.tetramakine.com
    N-H-P JAW SET FOR UPPER JAW O

    N-H-P JAW SET FOR ROD HOLDER S

    REMOTE CONTROL S

    MUD PUMP S

    2. MUD PUMP O

    LIGHTING S

    DIGITAL DISPLAY S

    MULTIPLE MANOMETER S

    BRAKE WIRELINE MOTOR S


    DOUBLE CHAMBER REFRIGERANT
    RADIATOR S
    All data are approximate and change depending on the model of equipment and
    accessories used.
    All mechanical parts are manufactured by our company and available in stock.
    Depending on the type of foundation is recommended Usage of additional mud-pump
    for drilling of deeper holes.
    Spare parts of Far Eastern manufacture are not used in the production of our
    equipment.
    Main pump systems are JAPON KAWASAKI brand.
    Rotary engine is REXROTH brand.
    Cooling system is AKG brand which has a flow of 200 lt/min.and a capacity of 40000
    Kcal/h.
    Filters are Italian UFI brand.
    Controllers are Italian AMKA or Denmark DANFOSS brand.
    Movement system is German or Italy brand which has a carrying capacity of 12.000
    kg. on 60% slope.
    Warranty for 1 year or 2000 Hours.

    www.tetramakine.com
    ADDRESS: OSTİM OSB. 1202/1 SOKAK NO:29 OSTİM/ANKARA

    PHONE: +90 312 354 07 84 FABRİKA

    +90 532 337 18 49 (ENG.-RUS)(whatsapp-viber-telegram)

    FAX: +90 312 911 24 32

    MAIL: info@tetramakine.com sales@tetramakine.com

    WEB: www.tetramakine.com

    www.tetramakine.com

    You might also like