Apx6000 Model1 Quick Reference Guide
Apx6000 Model1 Quick Reference Guide
Apx6000 Model1 Quick Reference Guide
APX 6000 /
APX 6000Li
MODEL 1
USER GUIDE
Contents
Contents Computer Software Copyrights....12
1
English
Intelligent Lighting Indicators......................... 33
Alert Tones.................................................... 34
Preparing Your Radio for Use.......18 HAZLOC Battery Type Detection...................38
Charging the Battery......................................18
Attaching the Battery .................................... 18
Attaching the Antenna................................... 19 General Radio Operation...............40
Removing and Attaching the Accessory Selecting a Zone............................................40
Connector Cover...................................... 19 Selecting a Radio Channel............................ 40
Attaching the Belt Clip................................... 20 Receiving and Responding to a Radio Call... 40
Turning On the Radio.................................... 21 Receiving and Responding to a
Adjusting the Volume.....................................22 Talkgroup Call................................40
Receiving and Responding to a
Private Call (Trunking Only)...........41
Identifying Radio Controls............ 23 Receiving and Responding to a
Radio Parts and Controls.............................. 23 Telephone Call (Trunking Only)..... 41
Programmable Features................................ 24 Methods to Make a Radio Call.......................42
Assignable Radio Functions............... 24 Making a Talkgroup Call..................... 42
Assignable Settings or Utility Switching Between Repeater or Direct
Functions....................................... 27 Operation Button...................................... 43
Accessing the Preprogrammed Functions.....27 Monitor Feature............................................. 43
Push-To-Talk (PTT) Button............................27 Monitoring a Channel..........................43
Contents
English
Contents
Helpful Tips.................................... 88 Glossary..........................................97
Radio Care.................................................... 88
Cleaning Your Radio...........................89
Proper Ways to Handle the Radio...... 89 Limited Warranty..........................102
Radio Service and Repair................... 90 MOTOROLA COMMUNICATION
Battery Care.................................................. 90 PRODUCTS........................................... 102
Battery Charge Status.........................90 I. WHAT THIS WARRANTY COVERS
Battery Recycling and Disposal.......... 91 AND FOR HOW LONG:......................... 102
II. GENERAL PROVISIONS:....................... 103
III. STATE LAW RIGHTS:............................104
Accessories....................................92 IV. HOW TO GET WARRANTY SERVICE:.104
V. WHAT THIS WARRANTY DOES NOT
COVER:..................................................104
Maritime Radio Use in the VHF VI. PATENT AND SOFTWARE
Frequency Range....................... 93 PROVISIONS:........................................ 105
VII. GOVERNING LAW:.............................. 106
Special Channel Assignments....................... 93
VIII. For Australia Only................................ 106
Emergency Channel........................... 93
Non-Commercial Call Channel........... 93
Operating Frequency Requirements..............93
Declaration of Compliance for the Use of
Distress and Safety Frequencies..............96
Technical Parameters for Interfacing
External Data Sources..............................96
5
English
Declaration of Conformity
This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below.
Declaration of Conformity
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party
Declaration of Conformity
6
English
Declaration of Conformity
Class B Digital Device
As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with
Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules and Industry Canada license-exempt RSS standard. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or TV technician for help.
7
English
isotropically radiated power (e.i.r.p.) is not more than
Important Safety Information that necessary for successful communication.
RF Energy Exposure and Product Safety Guide This radio transmitter has been approved by Industry
for Portable Two-Way Radios Canada to operate with Motorola Solutions-approved
antenna with the maximum permissible gain and
ATTENTION!
required antenna impedance for each antenna type
This radio is restricted to Occupational use only. indicated. Antenna types not included in this list,
Before using the radio, read the RF Energy Exposure having a gain greater than the maximum gain
and Product Safety Guide for Portable Two-Way indicated for that type, are strictly prohibited for use
Radios which contains important operating with this device.
instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards
Important Safety Information
and Regulations.
For a list of Motorola Solutions-approved antennas,
batteries, and other accessories, visit the following
website:
http://www.motorolasolutions.com/APX
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
8
English
Notice to Users (FCC and Industry Canada)
Notice to Users (FCC and Industry
Canada)
This device complies with Part 15 of the FCC rules
and Industry Canada's license-exempt RSS's per the
following conditions:
• This device may not cause harmful interference.
• This device must accept any interference
received, including interference that may cause
undesired operation.
• Changes or modifications made to this device, not
expressly approved by Motorola, could void the
authority of the user to operate this equipment.
Software Version
All the features described in the following sections are
supported by the software version R15.00.00 or later.
Check with your dealer or system administrator for
more details of all the features supported.
9
English
les autres utilisateurs, le type et le gain de l'antenne
Consignes de sécurité importantes doivent être choisis de façon à ce que la puissance
isotrope rayonnée équivalente (P.I.R.E.) ne soit pas
Radios bidirectionnelles portatives : exposition
plus forte qu'il ne le faut pour établir la
aux radiofréquences et sécurité du produit
communication.
ATTENTION!
Cet émetteur radio a été approuvé par Industrie
Cette radio ne doit être utilisée qu'à des fins Canada pour utilisation avec une antenne approuvée
professionnelles. Avant d'utiliser la radio, lisez le par Motorola offrant le gain maximal autorisé et
guide Radios bidirectionnelles portatives : exposition l'impédance requise pour le type d'antenne indiqué. Il
aux radiofréquences et sécurité du produit, qui est strictement interdit d'utiliser avec cet appareil tout
Consignes de sécurité importantes
contient d'importantes instructions de fonctionnement type d'antenne ne figurant pas dans cette liste et
pour une utilisation sécuritaire et des informations sur présentant un gain supérieur au maximum indiqué
l'exposition aux fréquences radioélectriques, dans le pour le type.
but d’assurer votre conformité aux normes et
règlements en vigueur.
Visitez le site Web suivant pour obtenir la liste des
antennes, des batteries et des autres accessoires
approuvés par Motorola :
http://www.motorolasolutions.com/APX
Selon la réglementation d'Industrie Canada, cet
émetteur radio ne peut être utilisé qu'avec une
antenne dont le type et le gain maximal (ou minimal)
sont approuvés par Industrie Canada pour cet
émetteur. Afin de limiter les interférences radio pour
10
Français
(Canada)
Avis aux utilisateurs (FCC et Industrie Canada)
Avis aux utilisateurs (FCC et Industrie
Canada)
Cet appareil est conforme à la partie 15 des règles de
la FCC et d'Industrie Canada permis exemptés RSS
de par la conditions suivantes:
• Ce dispositif ne doit pas causer d'interférences
nuisibles.
• Cet appareil doit accepter toute interférence
reçue, y compris les interférences qui peuvent
perturber le fonctionnement.
• Les changements ou les modifications apportées
à ce dispositif, non expressément approuvées par
Motorola, peuvent annuler le droit de l'utilisateur à
utiliser cet équipement.
Version logicielle
Toutes les fonctions décrites dans les sections
suivantes sont prises en charge par la version
R15.00.00 ou les versions ultérieures du logiciel de la
radio.
Pour obtenir davantage de renseignements à propos
des fonctions prises en charge, adressez-vous à
votre détaillant ou à votre administrateur de système. 11
Français
(Canada)
Computer Software Copyrights
The Motorola products described in this manual may
include copyrighted Motorola computer programs
stored in semiconductor memories or other media.
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted computer programs including, but not
limited to, the exclusive right to copy or reproduce in
any form the copyrighted computer program.
Accordingly, any copyrighted Motorola computer
Computer Software Copyrights
12
English
Documentation Copyrights
Documentation Copyrights
No duplication or distribution of this document or any
portion thereof shall take place without the express
written permission of Motorola. No part of this manual
may be reproduced, distributed, or transmitted in any
form or by any means, electronic or mechanical, for
any purpose without the express written permission of
Motorola.
13
English
Disclaimer
The information in this document is carefully
examined, and is believed to be entirely reliable.
However, no responsibility is assumed for
inaccuracies. Furthermore, Motorola reserves the
right to make changes to any products herein to
improve readability, function, or design. Motorola
does not assume any liability arising out of the
applications or use of any product or circuit described
herein; nor does it cover any license under its patent
rights, nor the rights of others.
Disclaimer
14
English
Getting Started
damage to the equipment if not carefully
Getting Started observed.
Note:
How to Use This Guide An operational procedure, practice, or
This User Guide covers the basic operation of the condition and so on, which is essential to
APX Portables. emphasize.
16
English
Getting Started
Note:
User Selectable Talkgroups are not
compatible with this Conventional Talkgroup
Enhancement.
17
English
The LED on the charger indicates the charging
Preparing Your Radio for Use progress; see the charger user guide.
This section provides simple instructions to prepare
your radio for use. Attaching the Battery
If your radio is preprogrammed with volatile-key
Charging the Battery retention, the encryption keys are retained for
Warning: approximately 30 seconds after battery removal.
To avoid a possible explosion: Check with your dealer or system administrator for
more information.
• Do not replace the battery in any area
labeled hazardous atmosphere.
1 Slide the battery into the radio frame until the side
Preparing Your Radio for Use
19
English
Attaching the Belt Clip
A
1 Align the grooves of the belt clip with those of the
radio and press upward until you hear a click to
attach the belt clip.
C
Preparing Your Radio for Use
4 Press downward on the cover’s top to seat it in the 2 Use a flat-bladed object to press the belt clip tab
slot. away from the radio. Then, slide the clip
downward and away from the radio to remove the
5 Once in place, tighten by rotating the thumbscrew clip.
clockwise by hand.
20
English
Preparing Your Radio for Use
• If the power-up test is successful, you see a
Turning On the Radio splash screen on the radio display, followed by
the Home screen.
1 Rotate the On/Off/Volume Control Knob • If the power-up test is unsuccessful, you see
clockwise until you hear a click. ERROR XX/YY (XX/YY is an alphanumeric
code).
Note:
If the radio fails to power-up after
repeating a few times, record the ERROR
XX/YY code and contact your dealer.
21
English
2 To turn off the radio, rotate the On/Off/Volume 1 To increase the volume, rotate the On/Off/Volume
Control Knob counterclockwise until you hear a Control Knob clockwise.
click.
A
Preparing Your Radio for Use
22
English
Identifying Radio Controls
Identifying Radio Controls 9
1 Antenna
5
2 Top (Orange) Button[1]
3 Microphone
4 Accessory Connector
5 Battery Latch
23
English
6 2–Position Concentric Switch[1] Programmable Features
7 3–Position A/B/C Switch[1] Any reference in this manual to controls that are
8 LED preprogrammed means that a qualified radio
technician must use the radio programming software
9 16–Position Select Knob[1] to assign a feature to a control.
10 On/Off/Volume Control Knob Your dealer can program the programmable buttons
11 Top Side (Select) Button[1] as shortcuts to radio functions or preset channels/
groups depending on the duration of a button press:
12 Push-to-Talk (PTT) Button
Press Pressing and releasing rapidly.
13 Side Button 1[1]
Long press Pressing and holding for the
14 Side Button 2[1] preprogrammed duration (between
Identifying Radio Controls
16 Bluetooth Pairing Location Indicator Hold down Keeping the button pressed.
English
Identifying Radio Controls
Remote Speaker Microphone cancels an emergency alarm or
and Bluetooth headset. call.
Bluetooth Keys up the Bluetooth Headset Internet Protocol Display the Internet Protocol
Headset PTT microphone. Address (IP) address, device name and
status of the radio.
Bluetooth Clear Allows you to clear all pairing
All Pairing information for Bluetooth. This Man Down Clear Clears the alarm of Man Down
is accessed by a long press of mode which was triggered
the Bluetooth On/Off Button. when your radio achieves or
passes a tilt angle threshold or
Bluetooth Inquiry Enables Bluetooth Search
a combination of the angle
On/Off feature.
threshold and a motion
Bluetooth Enables Bluetooth visibility. sensitivity level.
Discoverable This is accessed by a long
Monitor Monitors a selected channel for
On/Off press of the Bluetooth Inquiry
(Conventional all radio traffic until function is
On/Off Button.
Only) disabled.
Call Response Allows you to answer a private
Nuisance Delete Temporarily removes an
call.
unwanted channel, except for
Dynamic Priority Allows any channel in a Scan priority channels or the
(Conventional List (except for the Priority-One designated transmit channel
Only) channel) to temporarily replace from the scan list.
the Priority-Two channel.
One Touch 1– 4 Launches a specific feature
Emergency Depending on the with one single button-press.
programming, initiates or You can setup as many as four
25
English
separately programmed buttons Secure Toggles the Secure
for four different features. Transmission Transmission On or Off when
Select the Secure/Clear Strapping
Private Line Overrides any coded squelch
(Conventional fields is set to Select for the
Defeat (DPL or PL) that is
and Trunking) current channel and when the
(Conventional preprogrammed to a channel.
radio is model/option capable.
Only)
Site Display/ Displays the current site ID and
Rekey Request Notifies the dispatcher you want
Search (Trunking RSSI value; performs site
a new encryption key.
Only) search for Automatic Multiple
Repeater Access Allows user to manually send a Site Select (AMSS) or
Button (RAB) repeater access codeword. SmartZone operation.
(Conventional
Site Lock/Unlock Locks onto a specific site.
Only)
(Trunking Only)
Identifying Radio Controls
28
English
Identifying Status Indicators
Received Signal Strength Indicator
Identifying Status Indicators (RSSI)
Status Icons The number of bars displayed repre-
sents the received signal strength for the
Selected icons are also shown on the first row of the current site, for trunking only. The more
112 x 32 pixel top monochrome display screen of stripes in the icon, the stronger the sig-
your radio. The following icons are for the front nal.
display screen unless indicated otherwise.
Roaming
Receiving
The radio has roamed to and is currently
Radio is receiving a call or data. registered to a foreign system.
Transmitting Direct
Radio is transmitting a call or data. On – Radio is currently configured for di-
rect radio-to-radio communication (dur-
Battery ing conventional operation only).
For IMPRES ™ battery operation only – Off – Radio is connected with other ra-
the icon shown indicates the charge re- dios through a repeater.
maining in the battery.
For all battery operation – the icon blinks Monitor (Carrier Squelch)
when the battery is low. Selected channel is being monitored
(during conventional operation only).
29
English
Power Level or Basic Zone Bank 1
or
L – Radio is set at Low power. or A – Radio is in Zone 1.
H – Radio is set at High power. B – Radio is in Zone 2.
C – Radio is in Zone 3.
Scan
Radio is scanning a scan list. or Basic Zone Bank 2
or D – Radio is in Zone 4.
Priority Channel Scan
E – Radio is in Zone 5.
Blinking dot – Radio detects activity on
channel designated as Priority-One. F – Radio is in Zone 6.
Identifying Status Indicators
Bluetooth On
Bluetooth is on and ready for Bluetooth
connection.
Bluetooth Connected
31
English
Blinking yellow Radio is receiving a secured
A transmission.
Solid green Radio is powering up, or is on
a non-priority channel while in
the Scan List Programming
mode.
Blinking green Radio is receiving an
individual or telephone call, or
is on a Priority-Two channel
while in the Scan List
Programming mode.
Identifying Status Indicators
Rapidly blinking Radio has failed the self test Blinking blue three Bluetooth is powering on or
red upon powering up or times off.
encountered a fatal error. Slow blinking blue Radio is waiting to be paired
Solid yellow Channel is busy. when no device is connected
(Conventional with radio in Bluetooth.
Only)
32
English
Identifying Status Indicators
Blinking blue at Radio is connected with at Solid blue Radio is powering up with
heartbeat pace least a device in Bluetooth Option Board error.
link.
Note:
Solid blue for two Bluetooth device is No LED indication when the radio receives a
seconds connected. clear (non-secured) transmission in trunking
Bluetooth device is Mode. LED indication can be preprogramed by
disconnected. qualified technician to be permanently
disabled. Consult your dealer for further
Blinking blue Radio is clearing Bluetooth
details if you want to disable it.
pairing information.
Rapid blinking blue Radio fails to connect or
for two seconds disconnect from a device.
Alert Tones
Your radio uses alert tones to inform you of the condition of your radio. The following table lists these tones and
when they occur.
34
English
Identifying Status Indicators
You Hear Tone Name Heard
Short, Low- Radio Self Test Fail When radio fails its power-up self test.
Pitched Tone
Reject When an unauthorized request is made.
Time-Out Timer Warning Four seconds before time out.
No ACK Received When radio fails to receive an acknowledgment.
Individual Call Warning When radio is in an individual call for greater than 6 seconds
Tone without any activity.
Man Down Entry When radio initiates Man Down mode.
Long, Low- Time-Out Timer Timed Out After time out.
Pitched Tone
Talk Prohibit/PTT Inhibit (When PTT button is pressed) transmissions are not allowed.
Lack of Voice PTT Time out When the radio ends your call after it detected there are lack of
voice for 5 seconds after the PTT is pressed and hold. Your ra-
dio ends the call to enable your radio to receive calls from other
radio users.
Out of Range (When PTT button is pressed) the radio is out of range of the
system.
Invalid Mode When radio is on an unpreprogrammed channel.
35
English
You Hear Tone Name Heard
A Group of Busy When system is busy.
Low-Pitched
Tones
Short, Medium- Valid Key-Press When a correct key is pressed.
Pitched Tone
Radio Self Test Pass When radio passes its power-up self test.
Clear Voice At beginning of a non-coded communication.
Priority Channel Received When activity on a priority channel is received.
Emergency Alarm /Call En- When entering the emergency state.
try
Identifying Status Indicators
Central Echo When central controller has received a request from a radio.
Long, Medium- Volume Set When volume is changed on a quiet channel.
Pitched Tone
Emergency Exit When exiting the emergency state.
A Group of Me- Failsoft When the trunking system fails.
dium-Pitched
Automatic Call Back When voice channel is available from previous request.
Tones
Keyfail When encryption key has been lost.
Console Acknowledge When status, emergency alarm, or reprogram request ACK is re-
ceived.
36
English
Identifying Status Indicators
You Hear Tone Name Heard
Received Individual Call When Call Alert or Private Call is received.
Site Trunking When a SmartZone trunking system fails.
Short, High- Low-Battery Chirp When battery is below preset threshold value.
Pitched Tone
(Chirp)
Two High- GPS Fails When the GPS signal is lost or when GPS fails.
Pitched Tones
Ringing Phone Call Received When a land-to-mobile phone call is received.
Gurgle Dynamic Regrouping (When PTT button is pressed) a dynamic ID has been received.
Talk Permit (When PTT button is pressed) is verifying with the system for ac-
cepting its transmissions.
Unique, Low- New Message When a new message is received.
Pitched Chirp
Unique, High- Priority Status When a priority message is received.
Pitched Chirp
Incremental- Bluetooth Paired When Bluetooth accessory is paired with the radio.
Pitched Tone
Bluetooth Connected When Bluetooth accessory is connected to the radio.
37
English
You Hear Tone Name Heard
Decremental- Bluetooth Unpaired When Bluetooth accessory is unpaired from the radio.
Pitched Tone
Bluetooth Disconnected When Bluetooth accessory is disconnected from the radio.
A Group of Man Down Continuous When radio is in Man Down mode and prepares to transmit
Very High- Tone Emergency Alarm when the timer of this alarm ends.
Pitched Tones
Critical Man Down Continu- When radio is in Man Down Enhanced mode and prepares to
ous Tone transmit Emergency Alarm when the timer of this alarm ends.
Unique Low- Enhanced Zone Bank Up When EZB Up button is pressed to scroll the Enhance Zone
High Tone Bank up.
Unique High- Enhanced Zone Bank Down When EZB Down button is pressed to scroll the Enhance Zone
Identifying Status Indicators
39
English
a) Rotate the preprogrammed 16–Position
General Radio Operation Select Knob to the desired channel.
b) Press the PTT button to transmit on the
Selecting a Zone displayed zone channel.
Your radio must be preprogrammed to allow you to
use this feature. Receiving and Responding to a Radio Call
A zone is a group of channels. Once you have selected the required channel and/or
zone, you can proceed to receive and respond to
Select a zone via the preprogrammed Zone (3- calls.
Position A/B/C) switch:
The LED lights up solid red while the radio is
a) Move the preprogrammed Zone (3-Position
transmitting. In conventional mode, the LED lights up
A/B/C) switch to the position of the required
solid yellow when the radio is receiving a
zone.
transmission. In trunking mode, there is no LED
General Radio Operation
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 When you receive a Private Call, you hear two alert
cm) from your mouth. tones and the LED blinks green. The display shows
CALL RCV, alternating with the caller alias (name) or
2 Press the PTT button to respond to the call. ID (number).
The LED lights up solid red.
1 Press the Call Response button within 20
3 Release the PTT button to listen. seconds after the call indicators begin.
See also Making a Talkgroup Call on page 42 for 2 Press and hold the PTT button to talk. Release the
details on making a Talkgroup Call. PTT button to listen.
Receiving and Responding to a Private Call (Trunking 3 Press the Call Response button to hang up and
Only) return to the Home screen.
A Private Call is a call from an individual radio to
You cannot initiate a Private Call.
another individual radio.
Receiving and Responding to a Telephone Call
The one-to-one call between the two radios are not
(Trunking Only)
heard by the others in the current talkgroup. The
calling radio automatically verifies that the receiving This feature allows you to receive calls similar to
radio is active on the system and can display the standard phone calls from a landline phone.
caller ID.
41
English
Note: • The 16-Position Select Channel Knob.
With the inactivity timer enabled (optional), if
Making a Talkgroup Call
there is no response to the call after the timer
expires, your radio exits the call with Menu To make a call to a group of users, your radio must
Inactive Exit tone. be configured as part of that talkgroup.
When you receive a Telephone Call, you hear a 1 Turn the 16-Position Select Channel Knob to
telephone-type ringing and the LED blinks green. The select the channel with the desired talkgroup.
backlight of the screen turns green and the display
shows PHN CALL and the call received icon blinks. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
1 Press the Call Response button within 20
seconds after the call indicators begin. 3 Press the PTT button to make the call.
The radio shows different indicators based on the
2 Press and hold the PTT button to talk. Release the system the radio is configured.
General Radio Operation
44
English
Advanced Features
Responding to the Dynamic Regrouping Feature
Advanced Features (Trunking Only)
This feature allows the dispatcher to temporarily
Advanced Call Features reassign selected radios to a particular channel where
Selective Call (ASTRO Conventional Only) they can communicate with each other. This feature is
typically used during special operations and is
This feature allows you to receive a call from a enabled by a qualified radio technician.
specific individual with privacy.
You will not notice whether your radio has this feature
Receiving a Selective Call enabled until a dynamic regrouping command is sent
When you receive a Selective Call, you hear two alert by the dispatcher.
tones and the LED lights up solid yellow. The Note:
backlight of the screen turns green momentarily and If you try to access a zone or channel that has
the display briefly shows CALL RCV. been reserved by the dispatcher as a
The speaker unmutes. dynamically regrouped mode for other users,
you hear an invalid tone.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth. When your radio is dynamically regrouped, it
automatically switches to the dynamically regrouped
2 Press and hold the PTT button to talk. Release the channel. You hear a Gurgle tone and the display
PTT button to listen. shows the dynamically regrouped channel’s name.
You cannot initiate a Selective Call. Press the PTT button to talk. Release PTT button
to listen.
48
English
Advanced Features
Note: • Silent Emergency Alarm
This feature must be preprogrammed by a
Check with your dealer or system administrator for
qualified radio technician.
more information on the programming of this feature.
Receiving a Call Alert Page
Only one of the Emergency modes above can be
When you receive a Call Alert page, you hear four assigned to the preprogrammed Emergency button.
repeating alert tones and the LED blinks green. The
Note:
call received icons blinks and the display shows PAGE
To exit emergency at any time, press and hold
RCV.
the preprogrammed Emergency button for
Press any button to clear the Call Alert page. about a second. This timer is programmable
from 0 – 6250 milliseconds by a qualified
You cannot send a Call Alert page. technician.
The radio operates in the normal dispatch
Emergency Operation manner while in Emergency Call, except if
The Emergency feature is used to indicate a critical enabled, it returns to one of the following:
situation.
Tactical/Non- The radio sends
If the Top (Orange) button is preprogrammed to send Revert emergency alarm and/or
an emergency signal, this signal overrides any other make emergency call on
communication over the selected channel. the current selected
channel.
Your radio supports the following Emergency modes:
Non-Tactical/ The radio reverts to the
• Emergency Alarm preprogrammed
Revert for
• Emergency Call (Trunking Only) Conventional emergency channel to
• Emergency Alarm with Emergency Call system
49
English
send alarm and/or make • The display shows EMERGENCY and the current
emergency call. zone or channel. You hear a short medium-
pitched tone and the LED blinks red
Non-Tactical/ The radio reverts to the momentarily.
Revert for preprogrammed • The radio sounds a short low-pitched tone to
Trunking emergency talkgroup to indicate that the selected channel does not
system send alarm and/or make support emergency and rejects to launch
emergency call. emergency mode.
Man Down is an alternate way to activate the
When you receive the dispatcher’s acknowledgment,
Emergency feature on the condition the Emergency
the display shows ACK RCVD. Four tones sound, the
must be set up for this feature to operate.
alarm ends, and the radio exits the Emergency Alarm
See Man Down on page 56 for details. mode.
Sending an Emergency Alarm If no acknowledgement is received, the display shows
NO ACK. The alarm ends and the radio exits the
This feature allows you to send a data transmission,
Emergency Alarm mode.
Advanced Features
Emergency.
light up, and you hear no tones. The silent
emergency state continues until you perform the Emergency Keep-Alive Feature
next step.
This feature, when enabled, prevents the radio from
2 Perform one of the following actions: being turned off via the On/Off Control Knob when
the radio is in the Emergency state.
• Press and hold the preprogrammed
Emergency button for about a second to exit Note:
the Silent Emergency Alarm mode. The radio only exits the Emergency state
using one of the ways mentioned in the
previous sections.
52
English
Advanced Features
See Sending an Emergency Alarm on page
50, Sending an Emergency Call (Trunking Press the pre-programmed Emergency button to
Only) on page 50, Sending an Emergency transmit the EFM beacon.
Alarm with Emergency Call on page 51, or The receiving radio displays BEAC RX.
Sending a Silent Emergency Alarm on page
52.
Fireground
Emergency Find Me
The portable Fireground Communications System is
The Emergency Find Me (EFM) feature is an designed for deployment at an incident scene. It
additional emergency feature providing information to consists of five central components:
nearby radios, utilizing the Bluetooth Low Energy (BT- • Your APX portable radios
LE) transmission from a radio. In an emergency
• Incident Management Software
situation, when the user presses the pre-programmed
Emergency button, there will be periodic Emergency • Command Terminal
Find Me beacon transmitted from the radio along with • Radio Frequency (RF) Modem (Conventional
the other existing emergency activities. The radios Only)
which are near to the transmitting radio and are • Control Channel Radio (Trunking)
capable of receiving BT-LE signals would receive the • Optional Data Radio (Trunking)
beacon transmission. The range of EFM beacon • Accountability Server (Trunking)
depends on the environment in which the radios are • DVRS (Optional)
located.
These components provide on-scene and inbuilding
Check with your dealer or system administrator for radio coverage, and enhanced personnel
more information on the programming of this feature. accountability and monitoring.
55
English
• Press PTT button to transmit. Talk clearly into 1 Press the Emergency button to enter Emergency
the microphone. Release PTT button to listen. Mode.
• Receive and listen to call, the radio displays the You hear Emergency Beacon.
caller’s name or ID.
2 Press PTT button to make Emergency Call.
Using TPS Emergency Transmission
3 Release to listen.
The following are two important alert tones designed
You hear Emergency Call De-Key Sidetone. After
for this feature.
a short pause, you hear Emergency Beacon.
Emergency During Emergency if the TPS radio
4 Long press Emergency button to exit Emergency
Beacon user pushes the Emergency button,
mode and cancel Emergency Beacon.
the radio sounds a Beacon at the
maximum volume of the radio at
radio’s internal speaker and it is not Man Down
adjustable. This beacon goes to
Man Down condition is determined based upon the
silent when user presses the PTT
radio tilt angle or a combination of radio tilt angle and
Advanced Features
English
Advanced Features
Consult your agent or qualified technician for 1 The radio senses the Man Down condition and
more details. Pre-Alert Timer is initiated.
Your radio automatically activates Emergency Alarm 2 Man Down condition continues for the time
or Call when the radio achieves or passes a tilt angle duration defined in the Pre-Alert Timer field. At the
threshold or a combination of the angle threshold and end of this time, the radio alerts the user on the
radio motion below the motion sensitivity level, Man Down status with an audible alert tone and
depending upon how the radio is programmed. The MAN-DOWN text on the screen. The Post-Alert Timer
radio must stay in this condition for a preprogrammed also initiates at this point.
amount of time before the Emergency Alarm or Call is 3 Man Down condition continues for the time
activated. duration defined in the Post-Alert Timer field. Once
the timer expires, the Emergency alarm is
Note: transmitted. The Man Down Clear function is used
It is recommended that an Emergency button in this phase to cancel the Man Down condition.
is preprogrammed in order to allow the user to
exit the emergency condition. The following scenarios affect the timers:
The Man Down feature provides a Clear function to • Pressing the PTT button suspends the Man Down
the user. After a Man Down condition has been timers; releasing the PTT button re-initiates the
detected, the user can press a preprogrammed Clear Pre-Alert Timer.
button to cancel the Man Down condition. The radio • Pressing other buttons on the radio does not
remains in the Man Down state without triggering an impact these timers.
emergency condition until the radio is moved out of • Repositioning the radio exits the Man Down
the Man Down state, at which point Man Down feature, which stops and resets the timers.
functionality resumes. • Pressing a preprogrammed Clear button or
The Man Down feature has three phases: pressing a Menu Select button preprogrammed
for Clear stops and resets the timers. The timers
do not restart until the radio is repositioned.
57
English
Note: Post-Alert Timer
Emergency must be set up for this feature to
This timer sets the amount of time the radio needs to
operate. For details on operating the
remain in the Man Down condition before the
Emergency alerts, please see Emergency
Emergency alarm is transmitted. When the Post-Alert
Operation on page 49.
Timer is initiated, the radio alerts the user with an
If the radio is preprogrammed to horizontal audible tone and displays the “MAN-DOWN” text.
only, it must be worn in a vertical position
See Exiting Man Down Feature on page 60 to exit
otherwise the Man Down alert may be
Man Down feature.
inadvertently triggered.
Radio Alerts When Man Down Feature is Triggered
When the radio is programmed with Man
Down feature, special care is required when The Man Down alert tone volume is directly related to
charging the radio with a wall mounted the radio speaker volume. Ensure that the radio
charger. See Proper Ways to Handle the speaker volume is loud enough so that the user does
Radio on page 89 for details. not miss the Post-Alert tone.
Pre-Alert Timer Note:
Advanced Features
(when motion sensitivity is enabled). • The radio alerts with audible tone and displays
• Press the preprogrammed Man Down Clear MAN-DOWN.
button to exit. • If no tone is heard, make sure that the Man Down
feature is enabled on your radio. If Man Down
Re-Initiating Man Down feature was not enabled, please enable it and
After exiting the Emergency Operation when the radio repeat steps1 to 3.
is still in Man Down condition (tilted achieving • If the Man Down feature is enabled and no tone is
threshold angle or motionless), user must first exit heard, send the radio to a qualified technician.
Man Down condition to then reinitiate the Man Down
60 feature.
English
Advanced Features
messages in the strapped mode of
Secure Operations operation, regardless of the Secure/Clear
Secure radio operation provides the highest switch setting. This option must be
commercially available level of voice security on both preprogrammed by a qualified radio
trunked and conventional channels. technician.
Unlike other forms of security, Motorola digital The Secure/Clear switch only applies
encryption provides signaling that makes it virtually when the radio is transmitting.
impossible for others to decode any part of an
encrypted message. Selecting Clear Transmissions
For first time usage, turn on the radio for a This feature allows the radio to be equipped with
minimum of 3 hours prior to removing the different encryption keys and supports the DES-OFB
battery or else the radio may not be able to algorithm.
retain its key for 30 seconds. There are two types:
1 Attach the KVL to your radio. Conventional The encryption keys can be tied
Multikey (strapped), on a one-per-channel
basis, through Customer
62
English
Advanced Features
Programming Software. In addition, multikey option via the preprogrammed Top Side
you can have operator-selectable (Select) button and Top (Orange) button:
keys, operator-selectable keysets, a) Press and hold the Top Side (Select) button.
and operator-selectable key b) While holding Top Side (Select) button down,
erasure. If talkgroups are enabled press the Top (Orange) button.
in conventional, then the encryption The display shows PLS WAIT. When all the
keys are strapped to the talkgroups. encryption keys have been erased, the display
Trunked If the radio is used for both shows ALL ERASED.
Multikey conventional and trunked Note:
applications, strap the encryption Do not press the Top (Orange) button
keys for trunking on a per-talkgroup before pressing the Top Side (Select)
or announcement-group basis. In button, unless you are in an emergency
addition, a different key can be situation as this sends an emergency
strapped to other features, such as alarm.
dynamic regrouping, failsoft, or
emergency talkgroup. You can Requesting an Over-the-Air Rekey (ASTRO
have operator-selectable key Conventional Only)
erasure.
Ensure that the Unique Shadow Key (USK) is loaded
Erasing the Selected Encryption Keys into the radio with the key-variable loader (KVL)
before the rekey request can be sent. Refer to your
This feature allows you to erase all or selected local key management supervisor for more
encryption keys. information.
Erasing the single key in radios with the single-key This feature, also known as OTAR, allows the
option and erasing all keys in radios with the dispatcher to reprogram the encryption keys in the
radio remotely. The dispatcher performs the rekey 63
English
operation upon receiving a rekey request from the Note:
user. This feature must be preprogrammed by a
qualified radio technician. Check with your
Press and hold the preprogrammed Rekey dealer or system administrator for more
Request button to send the rekey request. information.
If the rekey operation fails, a bad-key tone sounds
and the display shows RKY FAIL. Infinite UKEK Retention
64
English
Advanced Features
Companding Reduces the channel noise, e.g. The Random FM Noise Canceller
OTA transmission, that is operates only in receive mode.
predominantly present in UHF2 and
900 MHz channel with the following
features. Global Positioning System / Global
Navigation Satellite System
Compressor Reduces the
background noise The Global Navigation Satellite System (GNSS) in the
flow and the speech radio uses information from the Global Positioning
signal at System (GPS) to determine the approximate
transmitting radio. geographical location of your radio. The geographical
location is expressed as latitude and longitude or
Expander Expands the speech Military Grid Reference System (MGRS) format per
while the noise flow request from customers.
remains the same at
receiving radio. Note:
This feature is addressed as GPS across the
Random FM Reduces the unwanted effects of manual as the naming convention of the
Noise random FM noise pulses caused by buttons and strings remain the same as the
Canceller channel fading under high Signal-to- legacy feature of GPS.
(Flutter Noise (S/N) conditions such as in a The availability and accuracy of this location
Fighter) moving transportation. The fading information (and the amount of time that it takes to
effects, heard as audio pops and calculate it) varies depending on the environment in
clicks, are cancelled without which you are using the GPS feature.
affecting the desired audio signal.
For example, GPS location fixes are difficult to obtain
indoors, in covered locations, between high buildings,
65
English
or in situations where you have not established a Even where location information can be calculated in
clear broad view of the sky. such situations, it may take longer to do so, and your
location estimate may not be as accurate. Therefore,
Once GPS is enabled, the radio displays the GPS
in any emergency situation, always report your
icon on the screen. The dispatcher can always
location to your dispatcher.
request the system to determine the real-time location
coordinates of the radio. Keep in mind that the accuracy of the location
information and the time it takes to obtain it varies
GPS Operation
depending upon circumstances, particularly the ability
The GPS technology uses radio signals from earth to receive signals from an adequate number of
orbiting satellites to establish location coordinates. satellites.
Therefore, maximizing your view of unobstructed sky
Note:
is essential for optimum performance.
Even where adequate signals from multiple
Where adequate signals from multiple satellites are satellites are available, your GPS feature only
not available (usually because you cannot establish a provides an approximate location, usually
view of a wide area of the sky), the GPS feature of within 10 meters from your actual location, but
Advanced Features
your radio will not work. Such situations include but sometimes farther away.
are not limited to:
The satellites used by the GPS feature are controlled
• Underground locations by the U.S. government and are subject to changes
• Inside buildings, trains, or covered vehicles implemented in accordance with the Department of
• Under any metal, or concrete roof, or structure Defense GPS user policy and the Federal Radio
• Between tall buildings or under dense tree-cover Navigation Plan. These changes may affect the
performance of the GPS feature on your radio.
• In temperature extremes outside the operating
limits of your radio
66
English
Advanced Features
GPS Performance Enhancement check with your nearest qualified technician for more
details.
Sometimes, the GPS feature may be unable to
complete a location calculation successfully. You then Note:
see a message indicating that your radio cannot If the receiving radio is operating in a Mixed
connect to enough visible satellites. Mode channel, and the voice transmission is
via conventional ASTRO system then the
To maximize the ability of your radio to determine a
radio can receive the location coordinates of
fix, take note of the following guidelines:
its peers.
• For your initial fix, hold the radio in the face
This feature is also operable in a Scan Active channel
position.
or Scan Talkback channel.
• Stay in the open. The GPS feature works best
where there is nothing between your radio and the Upon receiving a voice transmission with GPS
open sky. coordinates enabled on the receiving radio, the
display shows the coordinates available in full or in
Peer-Location on the Display (ASTRO Conventional short coordinates. There are two different formats
only) available. Refer to the following list for the details
This feature is only available for radio-to-radio voice shown in the Peer-Location quick text. Consult your
transmissions, dispatch call and selective call in agent to pick the best format to configure to your
conventional ASTRO system. For radio-to-radio radio.
transmission, in order to allow the radio to show peer-
location, the voice should be directly sent from one Full location • PTT ID (This is optional.)
radio to another radio without passing through any coordinates • Longitude and latitude
infrastructure facility such as repeaters, phone or • Relative distance or
DVRS system. Both the transmitting radio and direction.
receiving radio must be configured to enable them to
send and/or receive the GPS coordinates. You can
67
English
Short location During failsoft operation, your radio transmits and
• PTT ID (This is optional.)
coordinates receives in conventional operation on a
• Longitude and latitude predetermined frequency. You hear a medium-
pitched tone and the display shows FAILSOFT.
Note:
When the trunking system returns to normal
If the transmitting radio is stale at its location operation, your radio automatically leaves failsoft
after a period of time, the receiving radio operation and returns to trunked operation.
display shows ID:<PTT ID> LKL:
<Coordinates> <distance>. If the radio is To continue in Failsoft and to communicate with other
not configured to show PTT ID, you see LAST talkgroups, refer to the following procedure.
KNWN LOC: <Coordinates> <distance>.
1 Rotate the Mode Knob to change to a different
If the transmitting radio does not have GPS or repeater frequency.
the receiving radio could not decode the GPS
signal of the received signal, the receiving 2 Press the PTT button to talk, and release the
radio display shows ID:<PTT ID> UNK LOC. button to listen.
The PTT ID seen here is optional to be shown
Advanced Features
68 failsoft channel.
English
Advanced Features
Site Trunking Feature Site Display and Search Button
If the zone controller loses communication with any The Site Display and Site Search button allows you
site, that site reverts to site trunking. to view the name of the current site or force your
radio to change to a new one.
The display shows the currently selected zone/
channel combination and STE TRNK. Viewing the Current Site
Note: Press the preprogrammed Site Displ/Srch button.
When this occurs, you can communicate only
with other radios within your trunking site. The display shows momentarily the name of the
current site and its corresponding received signal
Locking and Unlocking a Site
strength indicator (RSSI).
This feature allows your radio to lock onto a specific Changing the Current Site
site and not roam among wide-area talkgroup sites.
This feature should be used with caution, since it Press and hold down the preprogrammed Site
inhibits roaming to another site in a wide-area system. Displ/Srch button.
You hear a tone and the display shows
Use the preprogrammed Site Lock/Unlock button momentary SCANNING.
to toggle the lock state between locked and
unlocked. When the radio finds a new site, it returns to the
Home screen.
The radio saves the new site lock state and returns to
the Home screen. Mission Critical Wireless - Bluetooth®-
This feature allows your radio to extend its
functionality by connecting to external proprietary
Motorola accessories.
69
English
Note: Turning on the Bluetooth via the preprogrammed
It is recommended to use Motorola proprietary button:
Mission Critical Wireless (MCW) devices with a) Press the preprogrammed button to turn on the
APX radios during Mission Critical operations Bluetooth.
as other Bluetooth® devices may or may not You hear a short, medium-pitched tone. The
meet the mission critical standard.
display shows momentarily BT ON, and
Your radio must be preprogrammed to allow appears.
you to use this feature.
If Bluetooth fails to launch, the display shows
The use of this feature requires the "Full BT ON FL.
Feature" expansion board together with the
Bluetooth Software. Turning Off the Bluetooth
The default setting for Bluetooth-enabled radio is Turning off the Bluetooth via the preprogrammed
Bluetooth on. See Turning Off the Bluetooth on page button:
70 to turn off the Bluetooth.
a) Press the preprogrammed button to turn off the
Advanced Features
Infinite (For all This Timer only applies to the ac- external devices.
Bluetooth devi- cessory. The programmable timer Check with your dealer or system administrator for
ces) choices are: 0 – 15 minutes, 2 more information about these timers.
hours, 4 hours or 8 hours.
To establish the Bluetooth Connection, see Pairing
Do note there are exceptions for with Low Frequency-Motorola Proximity Pairing (LF-
Operation Critical Wireless (OCW) MPP) Feature on page 73 or Standard Pairing
headset and PTT which are pre- Feature on page 74 .
programmed to 8 hours.
72
English
Advanced Features
Pairing with Low Frequency-Motorola Proximity Pairing Note:
(LF-MPP) Feature Once a COTS headset is paired to your radio,
it is always connected. Therefore the battery
Ensure that Bluetooth feature of your radio is on and
life of the accessory is aligned with the Talk
the Bluetooth tones are enabled.
Time power consumption, not the Standby
Bluetooth tones, Bluetooth menu and preprogrammed Time consumption.
buttons must be preprogrammed by a qualified radio
technician. Check with your dealer or system Turn on the accessory. Then, place it close to the
administrator for more information. radio aligning the Bluetooth Pairing Location (a
blue dot) on the radio to the Bluetooth Pairing
The range of Bluetooth operation when using a MCW Location (a blue dot) on the accessory.
accessory is 10 meters line-of-sight communication.
This is an unobstructed path between the location of If the pairing process is successful, you hear an
the signal transmitter (your radio) and the location of incremental-pitched tone. The radio begins to
the receiver (your device or accessory). connect to the device.
Obstacles that can cause an obstruction in the line-of- If the pairing process fails, you hear a short, low-
sight include trees, buildings, mountains, cars and pitched tone. The display shows PAIRFAIL.
etc. Repeat this step.
For high degree of reliability, Motorola recommends The radio tries to establish connection with the device
to NOT separate the radio and the accessory. once paired.
At the fringe areas of reception, both voice and tone Note:
quality will start to sound "garbled" or "broken". To If the connection fails within 6 seconds, you
correct this problem, simply position the accessory hear a decremental-pitched tone to indicate
and radio closer to each other (within the 10 meter that the device is unpaired. The display shows
defined range) to re-establish clear audio reception.
73
English
<Device Type> UNPAIRED. Repeat this step
to re-initiate the pairing process. to re-connect within 10 seconds, the blinking is
The starts blinking for up to 10 seconds. You hear The Bluetooth Standard Pairing feature enables your
a decremental-pitched tone. The display shows Bluetooth enabled radio to search for other Bluetooth
<Device Type> alternating with CON LOST. enabled and discoverable devices. Once the device is
discovered, your radio automatically pairs with the
If the Bluetooth device successfully re-connects device.
before the Bluetooth Drop Timer expires, the display
shows momentary <Device Type> CONNCTED, and This feature also enables your Bluetooth enabled
radio to be visible to other Bluetooth enabled devices
shows persistently, or if the Bluetooth device fails and receive request to pair from other devices.
74
English
Advanced Features
Searching and Pairing the Bluetooth Device One of the following scenarios occurs:
Ensure the Bluetooth on your device is turned on and • The radio continues to connect to the device. If the
is set to Discoverable in order to enable your radio to connecting process is successful, the radio
detect your device in Bluetooth. sounds an incremental-pitched tone. The display
shows <Device Type>CONNCTED, and the
Bluetooth Search in Bluetooth Standard Pairing
Bluetooth icon turns from b to a.
method is used to scan for other Bluetooth devices
nearby. It is set to turn off by default. • If the device already has pairing records and the
connecting process fails, the radio sounds a short,
The radio only search for HSP devices and Motorola low-pitched tone. The display shows <Device
MCW & OCW accessories. Radio filters out other Type> CON FAIL.
profiles. • If the connection fails within 6 seconds, you hear a
decremental-pitched tone to indicate that the
Press the preprogrammed Bluetooth Inquiry
device is unpaired. The display shows <Device
On/Off button, to enable the Bluetooth Search
feature. Type> UNPAIRED.
One of the following scenarios occurs: Turning On Bluetooth Visibility
• If successful, the display shows SRCH ON Turning Bluetooth visibility on enables other Bluetooth
followed by SRCH END when the radio is pairing devices to search for your radio. The visibility of the
with a device found. The display shows Bluetooth is set to turn off by default.
<Device Name> PAIRED to indicate pairing is
complete. a) Press and hold the preprogrammed Bluetooth
• If the feature fails to initiate or the radio fails to Inquiry On/ Off button for three seconds to
pair with any device, the display shows SRCH enable the Bluetooth visibility feature.
END when the search timer expires without One of the following scenarios occurs:
pairing with any device. Repeat this step.
75
English
• Keep holding the button although you hear You hear a short, medium-pitched tone. The
a short, medium-pitched tone with the display shows HDSET ON.
display shows momentary VISIBLE. This BT audio routing can be configured in CPS to
indicates the visibility is turned on route the audio to Remote Speaker Microphone
successfully.[2] (RSM)/radio's internal speaker. The audio routes
• If the visibility fails to turn on, the display to the radio's speaker if RSM is not connected.
shows VISIBLTYFAILED. Check with your dealer or system administrator for
• When the timer expires, the display shows more information on the programming of this
VISI OFF. feature.
Note:
For BT PTT press, the active microphone
Receiving Pairing Request from other Devices can be configured in CPS to transmit from
either the Remote Speaker Microphone
Turn on your radio Bluetooth Visible mode. (RSM), the radio microphone, or the BT
Your radio automatically accept the request and headset. If the configured device is not
pair with any request received from other device. available, audio transmission reverts to BT
Advanced Features
headset.
Turning On the Bluetooth Audio
Turning Off the Bluetooth Audio
Turning on the Bluetooth audio via the
preprogrammed button: Turning off the Bluetooth audio via the
a) Press the preprogrammed Bluetooth Audio preprogrammed button:
Reroute button to route the audio from the
radio to the headset.
English
Advanced Features
a) Press the preprogrammed Bluetooth Audio a) Long press the preprogrammed Bluetooth
Reroute button to route the audio from the On/Off button.
headset to the radio.
You hear a short, medium-pitched tone. The
You hear a short, medium-pitched tone. The
display shows PLS WAIT to indicate clearing is
display shows SPKR ON.
in progress.
Adjusting the Volume of the Radio from Bluetooth If successful, the display shows ALL CLR.
Audio Device
If unsuccessful, the radio sounds a short, low-
Ensure that the Bluetooth audio device is connected pitched tone.The display shows CLR FAIL.
to the radio.
Note:
Your radio can only control the volume of MCW and
If Re-Pair Timer is set to infinite and you clear
OCW Bluetooth enabled audio device. If the radio is
keys on the radio, you must clear keys on all
paired with other Bluetooth enabled audio device, its
previously paired devices as well. (Please see
volume is independent from the APX radio. In this
your accessories manual for further details.)
case, the volume is only adjustable on the device.
Pairing with LEX Handheld
Adjust volume up/down on the Bluetooth audio
device. Ensure that Bluetooth feature of your radio is on and
The radio display shows VOL XX and sounds a the Bluetooth tones are enabled.
short, medium-pitched tone.
1 Turn on the handheld and activate the Bluetooth
Clearing All Bluetooth Devices Information feature.
Clearing all Bluetooth devices information via the 2 Place the handheld close to the radio aligning the
preprogrammed Bluetooth On/Off button: Bluetooth Pairing Location on the handheld with
the Bluetooth Pairing Location on the radio.
77
English
If the pairing process is successful, you hear an Note:
incremental-pitched tone from the radio. The radio To unpair the handheld after a successful
begins to connect to the handheld. If the connection, follow the steps in Viewing and
connecting process is successful, you hear an Clearing the Bluetooth Device Information.
incremental-pitched tone. The display shows
<Device Friendly Name> connected, and the
Over-the-Air Programming (POP 25, ASTRO
Bluetooth icon turns from to . 25, ASTRO Conventional)
If unsuccessful, one of the following scenarios This feature enables configuration data and firmware
occur: to be upgraded to your radio over-the-air. Full use of
the radio is retained during the data transfer without
• You hear a short, low-pitched tone and the
interrupting communication. For ASTRO 25 and
display shows Bluetooth pairing failed (if
ASTRO Conventional, the upgrade pauses to give
pairing fails).
priorities to voice call, and continues after the voice
• You hear a decremental-pitched tone and the call ended. For Wi-Fi®, the upgrade process runs
display shows <Device Friendly Name> concurrently with voice calls.
unpaired (if the connection fails within 6
Advanced Features
for the radio to repeat the alert tone. An Turning Wi-Fi® on or off via the preprogrammed
interval of 5 seconds might impact the battery button:
life of the radio. Check with your dealer or a) To toggle the Wi-Fi on or off, press the
system administrator for more details. preprogrammed Wi-Fi button.
When mixing SSA with received voice audio, This button must be preprogrammed by a
the SSA alert is reduced in volume to ensure qualified radio technician. Check with your
that the voice message is still heard clearly. dealer or system administrator for more
Therefore, it is important that the SSA audio information.
files are created with clear loud audio to The display shows WIFI ON or WIFI OFF.
80
English
Advanced Features
Checking the Wi-Fi Configuration and Status of the
Radio
Utilities
Using the Flip Display
Long press the preprogrammed Wi-Fi button.
The display shows the current status of the Wi-Fi® This feature allows you to flip the content of the top
as described next. display upside down. It is particularly useful when you
would like to read the top display while the radio is
WF SRCHG Looking for available Wi-Fi still in the carry holder attached to your belt.
networks that have been
preprogrammed into the radio. To flip the display, press and hold the
preprogrammed Light/Flip button
WF CNTG In the process of connecting to a
found Wi-Fi network. Selecting a Basic Zone Bank
WF CNTD Connected to one of the The Basic Zone Select feature must to be
preprogrammed Wi-Fi networks. preprogrammed to the 3-position A-B-C switch,
NO No available networks or while the Basic Zone Bank feature must be
SERVICE connection with one of the preprogrammed to any side button or Top (Orange)
networks failed. button before you can use this feature.
If the radio is Wi-Fi connected, you see a Wi-Fi This feature allows twice as many zones to be
accessed from a switch, doubling the amount of
signal strength indicator, on the top display. switch positions.
81
English
The top display shows the status icons (A, B, C, D, Use the preprogrammed Transmit Power Level
E or F) or the zone name based on the bank and switch to toggle the power level between low and
switch position selected. high power.
Note:
The display shows LOW PWR and the low power icon
See the Basic Zone Bank 1 and Basic
or the display shows HIGH PWR and the high power
Zone Bank 2 icons for more information on
the status icons. icon.
Controlling the Display Backlight
Selecting the Power Level
You can enable or disable the radio’s display
Note: backlight as needed, if poor light conditions make the
This feature must be preprogrammed by a display or keypad difficult to read.
qualified radio technician.
Note:
This feature enables you to reduce the transmit power
level for specific case that requires a lower power The backlight remains on for a
level. You can select the power level at which your preprogrammed time before it automatically
Advanced Features
radio transmits. The radio always turns on to the turns off completely or returns to the minimum
default setting. These reduced transmit power level backlight level.
settings do not affect the receiving performance of
Perform one of the following actions:
your radio, nor diminish the overall quality of the
audio and data functionality of the radio given the • To toggle the backlight on or off, press the
following conditions. preprogrammed Light/Flip button.
• To turn the backlight on, press any
Power level Low enables a shorter transmitting
programmable radio controls or buttons.
distance and to conserve power. Power level High
enables a longer transmitting distance.
82
English
Advanced Features
Locking and Unlocking the Controls Using the Time-Out Timer
You can lock the programmable buttons, switches, This feature turns off the transmitter of your radio.
and rotary knobs of your radio to avoid inadvertent You cannot transmit longer than the preset timer
entry. Check with your dealer or qualified technician setting.
for best selection to suit your usage.
If you attempt to do so, the radio automatically stops
1 Toggle the preprogrammed Keypad/Control Lock your transmission, and you hear a talk-prohibit tone.
button or switch to on. The timer is defaulted at 60 seconds, but it can be
The display shows CTRL LCK. preprogrammed from 3 to 120 seconds, in 15-second
intervals, or it can be disabled entirely for each radio
2 Toggle again to unlock the controls. mode, by a qualified radio technician.
Turning Voice Mute On or Off Note:
You hear a brief, low-pitched, warning tone
You can enable and disable voice transmission, if
four seconds before the transmission times
needed.
out.
Turning Voice Mute off or on via the
1 Hold down the PTT button longer than the
preprogrammed Voice Mute button:
preprogrammed time.
a) To turn the feature off or on, press the You hear a short, low-pitched warning tone, the
preprogrammed Voice Mute button. transmission is cut-off, and the LED goes out until
you release the PTT button.
The display shows momentary VMUT OFF, and you
hear a short tone, indicating that the feature is 2 Release the PTT button.
disabled or the display shows momentary VMUT ON, The timer resets.
and you hear a short tone, indicating that the feature
is enabled. 3 To re-transmit, press the PTT button.
83
English
The time-out timer restarts and the LED lights up Option Result
solid red.
Digital Carrier-Operated You hear any digital traf-
Using Conventional Squelch Operation Features Squelch (COS) fic.
This feature filters out unwanted calls with low signal Normal Squelch You hear any digital traf-
strength or channels that have a higher than normal fic having the correct net-
background noise. work access code.
Analog Options
Selective Switch You hear any digital traf-
Tone Private Line (PL), Digital Private-Line (DPL), fic having the correct net-
and carrier squelch can be available work access code and
(preprogrammed) per channel. correct talkgroup.
PL or DPL The radio responds only channel. The radio also unmutes to any digital activity
to your messages. on a digital channel.
84
English
Advanced Features
Note: inhibited. The LED lights up solid yellow to indicate
When this feature is active, the Carrier that the channel is busy.
Squelch status indicator is displayed.
The following table shows the variations of smart
Digital PTT ID Support PTT:
This feature allows you to see the radio ID (number) Mode Description
of the radio from whom you are currently receiving a
Transmit Inhibit You cannot transmit if any traffic
transmission. This ID, consisting up to a maximum of
on Busy Chan- is detected on the channel.
eight characters, can be viewed by both the receiving
nel with Carrier
radio and the dispatcher.
Transmit Inhibit You cannot transmit on an active
The ID number of your radio is also automatically sent
on Busy Chan- channel with a squelch code or (if
every time the PTT button is pressed. This is a per-
nel with Wrong secure-equipped) encryption key
channel feature. For digital voice transmissions, the
Squelch Code other than your own. If the PL
ID of your radio is sent continuously during the voice
code is the same as yours, the
message.
transmission is not prevented.
Smart PTT Feature (Conventional Only)
Quick-Key Over- Your radio must be preprogram-
Smart PTT is a per-personality, programmable ride med to allow you to use Quick-
feature used in conventional radio systems to keep Key Override. This feature can
radio users from talking over other radio work in conjunction with either of
conversations. the two above variations. You
can override the transmit-inhibit
When smart PTT is enabled in your radio, you cannot
state by quick-keying the radio. In
transmit on an active channel.
other words, two PTT button
If you try to transmit on an active smart-PTT channel,
you hear an alert tone, and the transmission is 85
English
Mode Description Note:
Acknowledgement of any messages required
presses within the preprogram- from the radio is not transmitted if the Transmit
med time limit. Inhibition is enabled.
Enabling Transmit Inhibition
Transmit Inhibit
This feature is available for APCO 25 trunking, Type II Press the Transmit Inhibit programmable button.
trunking and Conventional operations for all APX Note:
radios. If the user has disabled TX Inhibit via the
When Transmit Inhibit feature is enabled, the radio menu and then moves the switch to the
stops all transmission including voice and data. The position where TX Inhibit is enabled, the
radio can receive messages but is not able to reply new value overwrites the menu value.
the acknowledgment request of the received The display shows Tx inhibit on. You hear a
message. sequence of short, low-high tones to indicate
User can physically control the transmission of the transmission is inhibited.
Advanced Features
87
English
• (For APX 6000/APX 6000Li R Radios Only)
Helpful Tips Your radio is designed to be submerged to
a maximum depth of 6 feet, with a
Radio Care maximum submersion time of 2 hours.
Exceeding either maximum limit may result
Caution: in damage to the radio.
• Your radio casting has a vent port that • (For APX 6000/APX 6000Li R Radios Only)
allows for pressure equalization in the Elastomer technology materials used for
radio. Never poke this vent with any seals in rugged portable radios can age
objects, such as needles, tweezers, or with time and environmental exposure.
screwdrivers.This could create leak paths Therefore, Motorola recommends that
into the radio and the radio’s submergibility rugged radios be checked annually as a
will be lost. preventive measure in order to assure the
watertight integrity of the radio. Motorola
details the disassembly, test, and
reassembly procedures along with
necessary test equipment needed to
inspect, maintain and troubleshoot radio
seals in the radio’s service manual.
Helpful Tips
through:
• the LED and sounds.
11% to 25%
• the fuel gauge icon on the display.
LED and Sounds
When your battery is low:
90
English
Helpful Tips
Gauge Battery Charge
10% or less (at 10%, the gauge
begins blinking)
92
English
Maritime Radio Use in the VHF Frequency Range
• distance to a well-known landmark
Maritime Radio Use in the VHF • vessel course, speed or destination
Frequency Range 5 State the nature of the distress.
6 Specify what kind of assistance you need.
Special Channel Assignments 7 State the number of persons on board and the
number needing medical attention, if any.
Emergency Channel
8 Mention any other information that would be
If you are in imminent and grave danger at sea and helpful to responders, such as type of vessel,
require emergency assistance, use VHF Channel 16 vessel length and/or tonnage, hull color, etc.
to send a distress call to nearby vessels and the 9 “OVER.”
United States Coast Guard. Transmit the following 10 Wait for a response.
information, in this order:
11 If you do not receive an immediate response,
1 “MAYDAY, MAYDAY, MAYDAY.” remain by the radio and repeat the transmission at
2 “THIS IS _____________________, CALL SIGN intervals until you receive a response. Be
__________.” State the name of the vessel in prepared to follow any instructions given to you.
distress 3 times, followed by the call sign or other Non-Commercial Call Channel
identification of the vessel, stated 3 times.
3 Repeat “MAYDAY” and the name of the vessel. For non-commercial transmissions, such as fishing
4 “WE ARE LOCATED AT reports, rendezvous arrangements, repair scheduling,
_______________________.” State the position or berthing information, use VHF Channel 9.
of the vessel in distress, using any information that
will help responders to locate you, e.g.: Operating Frequency Requirements
• latitude and longitude A radio designated for shipboard use must comply
• bearing (state whether you are using true or with Federal Communications Commission Rule Part
80 as follows:
magnetic north) 93
English
• on ships subject to Part II of Title III of the 1 156.050 160.650
Communications Act, the radio must be capable of
operating on the 156.800 MHz frequency. 2 156.100 160.700
• on ships subject to the Safety Convention, the * 156.150 160.750
Maritime Radio Use in the VHF Frequency Range
Note: 8 156.400 –
Simplex channels 3, 21, 23, 61, 64, 81, 82, 9 156.450 156.450
and 83 cannot be lawfully used by the general 10 156.500 156.500
public in US waters.
11 156.550 156.550
Additional information about operating
requirements in the Maritime Services can be 12 156.600 156.600
obtained from the full text of FCC Rule Part 80
13** 156.650 156.650
and from the US Coast Guard.
14 156.700 156.700
Table 1: VHF Marine Channel List
15** 156.750 156.750
Channel Num- Frequency (MHz) 16 156.800 156.800
ber
Transmit Receive 17** 156.850 156.850
94
English
Maritime Radio Use in the VHF Frequency Range
18 156.900 161.500 66 156.325 160.925
19 156.950 161.550 67** 156.375 156.375
20 157.000 161.600 68 156.425 156.425
* 157.050 161.650 69 156.475 156.475
22 157.100 161.700 71 156.575 156.575
* 157.150 161.750 72 156.625 –
24 157.200 161.800 73 156.675 156.675
25 157.250 161.850 74 156.725 156.725
26 157.300 161.900 75 *** ***
27 157.350 161.950 76 *** ***
28 157.400 162.000 77** 156.875 –
60 156.025 160.625 78 156.925 161.525
* 156.075 160.675 79 156.975 161.575
62 156.125 160.725 80 157.025 161.625
63 156.175 160.775 * 157.075 161.675
* 156.225 160.825 * 157.125 161.725
65 156.275 160.875 * 157.175 161.775
95
English
84 157.225 161.825 maritime use when it operates on the distress and
safety frequencies specified in RSS-182 Section 7.3.
85 157.275 161.875
86 157.325 161.925 Technical Parameters for Interfacing External
Maritime Radio Use in the VHF Frequency Range
Data Sources
87 157.375 161.975
88 157.425 162.025 RS232 USB SB9600
Input Volt- 18V 3.6V 5V
Note: age (Volts
* Simplex channels 3, 21, 23, 61, 64, 81, 82, Peak-to-
and 83 cannot be lawfully used by the peak)
general public in US waters. Max Data 115 Kbps 12 Mbps 9.6 Kbps
** Low power (1 W) only. Rate
Note:
A – in the Receive column indicates that the
channel is transmit only.
96
English
Glossary
distances from fixed and
Glossary mobile devices with high levels
This glossary is a list of specialized terms used in this of security.
manual. Bluetooth Pairing Bluetooth pairing occurs when
two bluetooth devices
ACK Acknowledgment of
exchanged a passkey to form a
communication.
paired Bluetooth wireless
Active Channel A channel that has traffic on it. connection.
Analog Signal An RF signal that has a Call Alert Privately page an individual by
continuous nature rather than a sending an audible tone.
pulsed or discrete nature.
Carrier Squelch Feature that responds to the
ARS Automatic Registration Service presence of an RF carrier by
opening or unmuting (turning
ASTRO 25 Motorola standard for wireless
on) a receiver’s audio circuit. A
digital trunked communications.
squelch circuit silences the
ASTRO Motorola standard for wireless radio when no signal is being
Conventional digital conventional received so that the user does
communications. not have to listen to “noise”.
Autoscan A feature that allows the radio Central Controller A software-controlled,
to automatically scan the computer-driven device that
members of a scan list. receives and generates data
for the trunked radios assigned
Bluetooth Bluetooth is an open wireless
to it. It monitors and directs the
technology standard for
exchanging data over short
97
English
operations of the trunked Digital Signal An RF signal that has a pulsed,
repeaters. or discrete, nature, rather than
a continuous nature.
Channel A group of characteristics such
as transmit/ receive frequency Dispatcher An individual who has radio
pairs, radio parameters, and system management duties.
encryption encoding.
Dynamic A feature that allows the
Control Channel In a trunking system, one of the Regrouping dispatcher to temporarily
channels that is used to reassign selected radios to a
provide a continuous, two-way/ single special channel so they
data communications path can communicate with each
between the central controller other.
and all radios on the system.
Failsoft A feature that allows
Conventional Typically refers to radio-to- communications to take place
radio communications, even though the central
sometimes through a repeater controller has failed. Each
(see Trunking). trunked repeater in the system
transmits a data word informing
Conventional A scan list that includes only
every radio that the system has
Scan List conventional channels.
gone into failsoft.
Glossary
101
English
applicable warranty period. All replaced parts of
Limited Warranty Product shall become the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA COMMUNICATION PRODUCTS MOTOROLA to the original end user purchaser only
and is not assignable or transferable to any other
I. WHAT THIS WARRANTY COVERS AND FOR party. This is the complete warranty for the Product
HOW LONG: manufactured by MOTOROLA. MOTOROLA
assumes no obligations or liability for additions or
MOTOROLA SOLUTIONS, INC. (“MOTOROLA”)
modifications to this warranty unless made in writing
warrants the MOTOROLA manufactured
and signed by an officer of MOTOROLA.
Communication Products listed below (“Product”)
against defects in material and workmanship under Unless made in a separate agreement between
normal use and service for a period of time from the MOTOROLA and the original end user purchaser,
date of purchase as scheduled below: MOTOROLA does not warrant the installation,
maintenance or service of the Product.
ASTRO APX 6000/APX One (1) Year
6000Li Portable Units MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by MOTOROLA
Limited Warranty
Product Accessories One (1) Year which is attached to or used in connection with the
Product, or for operation of the Product with any
MOTOROLA, at its option, will at no charge either ancillary equipment, and all such equipment is
repair the Product (with new or reconditioned parts), expressly excluded from this warranty. Because each
replace it (with a new or reconditioned Product), or system which may use the Product is unique,
refund the purchase price of the Product during the MOTOROLA disclaims liability for range, coverage, or
warranty period provided it is returned in accordance operation of the system as a whole under this
with the terms of this warranty. Replaced parts or warranty.
boards are warranted for the balance of the original
102
English
Limited Warranty
MOTOROLA offers the following optional extended and conditions. Repairs will be made only at the
service contracts. designated MOTOROLA repair depot. Local services
are not included. MOTOROLA will pay for outbound
SERVICE FROM THE START (SfS)
shipping via MOTOROLA'S normal shipping methods.
COMPREHENSIVE
Provides for extended hardware repair coverage II. GENERAL PROVISIONS:
INCLUDING CHEMICAL, LIQUID, FIRE, AND
OTHER PHYSICAL DAMAGE. Comprehensive This warranty sets forth the full extent of
coverage is available in conjunction with MOTOROLA'S responsibilities regarding the Product.
MOTOROLA’S standard Commercial Warranty and Repair, replacement or refund of the purchase price,
starts from the FIRST DAY the radio is put into use. at MOTOROLA’s option, is the exclusive remedy.
Service performed under this plan consists of repair THIS WARRANTY IS GIVEN IN LIEU OF ALL
or replacement of the covered equipment as set forth OTHER EXPRESS WARRANTIES. IMPLIED
in the terms and conditions. Repairs will be made only WARRANTIES, INCLUDING WITHOUT LIMITATION,
at the designated MOTOROLA repair depot. Local IMPLIED WARRANTIES OF MERCHANTABILITY
services are not included. MOTOROLA will pay the AND FITNESS FOR A PARTICULAR PURPOSE,
inbound shipping charges only with use of the ARE LIMITED TO THE DURATION OF THIS
MOTOROLA designated delivery service. LIMITED WARRANTY. IN NO EVENT SHALL
MOTOROLA will pay for outbound shipping via MOTOROLA BE LIABLE FOR DAMAGES IN
MOTOROLA'S normal shipping methods. EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
SERVICE FROM THE START (SfS) LITE TIME, INCONVENIENCE, COMMERCIAL LOSS,
Provides extended hardware normal wear and tear LOST PROFITS OR SAVINGS OR OTHER
repair coverage beginning AFTER MOTOROLA’S INCIDENTAL, SPECIAL OR CONSEQUENTIAL
standard Commercial Warranty period expires. DAMAGES ARISING OUT OF THE USE OR
Service performed under this plan consists of repair INABILITY TO USE SUCH PRODUCT, TO THE
of the covered equipment as set forth in the terms 103
English
FULL EXTENT SUCH MAY BE DISCLAIMED BY warranty service. You can also call MOTOROLA at
LAW. 1-800-927-2744 US/Canada.
English
Limited Warranty
7 Rechargeable batteries if: pay those costs and damages finally awarded against
the end user purchaser in any such suit which are
• any of the seals on the battery enclosure of
attributable to any such claim, but such defense and
cells are broken or show evidence of
payments are conditioned on the following:
tampering.
• the damage or defect is caused by charging or 1 that MOTOROLA will be notified promptly in
using the battery in equipment or service other writing by such purchaser of any notice of such
than the Product for which it is specified. claim,
8 Freight costs to the repair depot. 2 that MOTOROLA will have sole control of the
9 A Product which, due to illegal or unauthorized defense of such suit and all negotiations for its
alteration of the software/firmware in the Product, settlement or compromise, and
does not function in accordance with 3 should the Product or parts become, or in
MOTOROLA’s published specifications or the FCC MOTOROLA’s opinion be likely to become, the
certification labeling in effect for the Product at the subject of a claim of infringement of a United
time the Product was initially distributed from States patent, that such purchaser will permit
MOTOROLA. MOTOROLA, at its option and expense, either to
10 Scratches or other cosmetic damage to Product procure for such purchaser the right to continue
surfaces that does not affect the operation of the using the Product or parts or to replace or modify
Product. the same so that it becomes non-infringing or to
11 Normal and customary wear and tear. grant such purchaser a credit for the Product or
parts as depreciated and accept its return. The
depreciation will be an equal amount per year over
VI. PATENT AND SOFTWARE PROVISIONS:
the lifetime of the Product or parts as established
MOTOROLA will defend, at its own expense, any suit by MOTOROLA.
brought against the end user purchaser to the extent
MOTOROLA will have no liability with respect to any
that it is based on a claim that the Product or parts
claim of patent infringement which is based upon the
infringe a United States patent, and MOTOROLA will 105
English
combination of the Product or parts furnished
hereunder with software, apparatus or devices not VII. GOVERNING LAW:
furnished by MOTOROLA, nor will MOTOROLA have This Warranty is governed by the laws of the State of
any liability for the use of ancillary equipment or Illinois, U.S.A.
software not furnished by MOTOROLA which is
attached to or used in connection with the Product. VIII. For Australia Only
The foregoing states the entire liability of
MOTOROLA with respect to infringement of patents This warranty is given by Motorola Solutions Australia
by the Product or any parts thereof. Pty Limited (ABN 16 004 742 312) of Tally Ho
Business Park, 10 Wesley Court. Burwood East,
Laws in the United States and other countries Victoria.
preserve for MOTOROLA certain exclusive rights for
copyrighted MOTOROLA software such as the Our goods come with guarantees that cannot be
exclusive rights to reproduce in copies and distribute excluded under the Australia Consumer Law. You are
copies of such MOTOROLA software. MOTOROLA entitled to a replacement or refund for a major failure
software may be used in only the Product in which the and compensation for any other reasonably
software was originally embodied and such software foreseeable loss or damage. You are also entitled to
in such Product may not be replaced, copied, have the goods repaired or replaced if the goods fail
Limited Warranty
distributed, modified in any way, or used to produce to be of acceptable quality and the failure does not
any derivative thereof. No other use including, without amount to a major failure.
limitation, alteration, modification, reproduction, Motorola Solutions Australia’s limited warranty above
distribution, or reverse engineering of such is in addition to any rights and remedies you may
MOTOROLA software or exercise of rights in such have under the Australian Consumer Law. If you have
MOTOROLA software is permitted. No license is any queries, please call Motorola Solutions Australia
granted by implication, estoppel or otherwise under at 1800 457 439. You may also visit our website:
MOTOROLA patent rights or copyrights. http://www.motorolasolutions.com/XA-EN/Pages/
106 Contact_Us for the most updated warranty terms.
English
APX6000_M1_BackCover_HalfLetter_P299C.fm Page 2 Monday, November 3, 2014 4:15 PM
M
Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, Illinois 60196 U.S.A.
*68012001081*
68012001081-JE