Nama : Mori Theresya

NIM : 221221040
Kelas. : 2B - TEKNIK AERONAUTIKA
Kelompok :3
Mata Kuliah : Perkakas Pesawat Udara

COMBUSTION SECTION

Fig Part ATA Nomenclature Unit Torque Wrench Reference

Item Number Per (ukuran)
Assy
1-1 MS9015– 72-40-00 PLUG, 0.375–24 1 OPEN MM 72-40-00
03 (USED ON END ENGINE IPC
HORIZONTAL WRENCH
ENGINE 5/8inch
INSTALLATION)
1-2 6854255 72-40-00 VALVE ASSY, 1 120–140 OPEN MM 72-40-00
BURNER DRAIN lb in. (14– END ENGINE IPC
16 N.m) WRENCH
3/4inch
1-3 6854519 72-40-00 PLUG, MACHINE 1 OPEN MM 72-40-00
THREAD, 0.375–24 END ENGINE IPC
X 0.438–20 (USED WRENCH
ON COMPRESSOR 5/8inch
HIGH ALTITUDE
ENGINE
INSTALLATION)
1-4 AS3208–03 72-40-00 PACKING, 0.301 IN. 2 MM 72-40-00
(7.65 MM) ID (S ENGINE IPC
AS3084–03)
1-5 FIG. REF 72-40-00 NOZZLE ASSY, REF 200–300 OPEN MM 72-40-00
FUEL SPRAY REF lb in. (23– END ENGINE IPC
(REF 73–10–00,1, 34 N.m) WRENCH
FOR DETAIL 3/4inch
PARTS)
1-6 23031260 72-40-00 CASE ASSY, 1 MM 72-40-00
OUTER ENGINE IPC
COMBUSTION
1-7 MS9432– 72-40-00 BOLT, TEE–HEAD, 24 35-40 lb MM 72-40-00
06 0.190–32 X 0.500 (3.9-4.5 ENGINE IPC
IN. (12.70 MM) N.m).
(ALL POSNS
UNLESS
OTHERWISE
SPECIFIED
1-8 MS21043– 72-40-00 NUT, SLFLKG, 24 OPEN MM 72-40-00
3 0.190–32 END ENGINE IPC
WRENCH
1/4inch
1-9 6875510 72-40-00 PIN, STR, 0.093 OD 2 MM 72-40-00
X 0.250 IN. (2.36 X ENGINE IPC
6.35 MM)
1-10 23008413 72-40-00 TUBE ASSY, 2 MM 72-40-00
COMPRESSOR ENGINE IPC
DISCHARGE AIR
1-11 23001946 72-40-00 RING, RETAINING, 2 MM 72-40-00
INT, 3.161 OD X ENGINE IPC
0.063 IN (80.29 X
1.60 MM)
1-16 6870736 72-40-00 RING, PISTON, 2 MM 72-40-00
SPLIT SEAL, 2.230 ENGINE IPC
OD X 0.180 IN.
(56.64 X 4.57 MM)
(2–PIECE)
1-17 6870737 72-40-00 RING, PISTON, 2 MM 72-40-00
SPLIT SEAL, 2.970 ENGINE IPC
OD X 0.180 IN.
(75.44 X 4.57 MM)
(2 PIECE)
1-18 23060429 72-40-00 LINER ASSY, 1 MM 72-40-00
COMBUSTION ENGINE IPC
1-19 23061212 72-40-00 LINER ASSY, AR MM 72-40-00
PARTIAL ENGINE IPC
COMBUSTION,
AFT SECTION
(SERV USE &
SPARE PARTS
PROC)
1-20 23061214 72-40-00 . FLANGE, AFT AR MM 72-40-00
SKIRT, ENGINE IPC
COMBUSTION
LINER (SERV USE
& SPARE PARTS
PROC)
1-21 23061213 72-40-00 . CONE, 1ST AR MM 72-40-00
SECTION, ENGINE IPC
COMBUSTION
LINER (SERV USE
& SPARE PARTS
PROC)
1-22 23004529 72-40-00 DOME, AR MM 72-40-00
COMBUSTION ENGINE IPC
LINER SUB–ASSY
(SERV USE &
 SPARE PARTS
PROC)
1-23 23007991 72-40-00 FERRULE, FUEL AR MM 72-40-00
NOZZLE, ENGINE IPC
COMBUSTION
LINER (SERV USE
& SPARE PARTS
PROC)
- - 72-40-00 FUEL HOSE TO - 80–120 lb MM 72-40-00
THE FUEL in. (9.0–
NOZZLE Tighten 13.6 N. m
coupling nut.
Secure with
lockwire.
 Nama : Nazri Nurulaulia
NIM : 221221045
Kelas. : 2B - TEKNIK AERONAUTIKA
Kelompok :3
Mata Kuliah : Perkakas Pesawat Udara

COMPRESSOR ASSY, AXIAL CENTRIFUGAL

Fig Part ATA Figure Nomenclature Unit Torque Wrench Reference

Item Number Index Per (ukuran)
Assy
6 MS9218–12 72- Figure BOLT, 0.250–28 X 0.875 3 22.23 MM Rolls-
00-00 1 IN. (3 REQD WHEN Royce
USING 6875492 250-C20
GEARBOX ASSY)

7 6849468– 72- Figure BOLT, INT 1 25.4 MM Rolls-

12142 00-00 1 WRENCHING, 0.250– Royce
28 X 1.00 IN. 250-C20
8 MS9218–16 72- Figure BOLT, 0.250–28 X 1.125 1 (28.58 MM) Rolls-
00-00 1 IN. Royce
250-C20
9 MS9218–23 72- Figure BOLT, 0.250–28 X 1.562 1 (39.68 MM) Rolls-
00-00 1 IN. (UW 6876685 Royce
BRACKET) 250-C20
10 6825392 72- Figure WASHER, 0.265 ID X 1 (6.73 X 1 Rolls-
00-00 1 0.688 OD X 0.090 IN. 17.48 X Royce
(UW MS9218–16 BOLT) 2.29 MM) 250-C20
11 MS21043–4 72- Figure NUT, SLFLKG, 0.250– 2 Rolls-
00-00 1 28 Royce
250-C20
12 AN960C41 72- Figure WASHER, 0.250 IN. ID 2 (6.35 MM) Rolls-
6L 00-00 1 Royce
250-C20
 Nama : Muhammad Patra Anggana Prathama
NIM : 221221042
Kelas. : 2B - TEKNIK AERONAUTIKA
Kelompok :3
Mata Kuliah : Perkakas Pesawat Udara

IDENTIFICATION FASTENER ENGINE ALLISON M250-C20B

EXHAUST SECTION 72-50-00

Fig Part ATA Figure Nomenclature Unit Torque Wrench Reference

Item Number Index Per (ukuran)
Assy
2 6810063 72-50-00 FIGURE NUT, SLFLKG, 0.190– 24 20-30 OPEN MM 72-
-1032 3 32 (FRO MS21043–3) lb in. END 50-00
WRENC
1/4 inch
2-2 MS2104 72-50-00 FIGURE NUT, SLFLKG, 0.190– 24 20-30 OPEN MM 72-
3-3 3 32 lb in. END 50-00
WRENC
H ¼ inch
3 MS9432 72-50-00 FIGURE BOLT, TEE–HEAD, 16 35-40 MM 72-
–05 3 0.190–32 X 0.438 IN. lb in 50-00
(11.13 MM) (REF 250
CEB 1181) (FRO
MS9432–06 &
6876097)
3-1 MS9432 72-50-00 FIGURE BOLT, TEE–HEAD, 21 35-40 MM 72-
–07 3 0.190–32 X 0.562 IN. lb in. 50-00
(14.27 MM)
(FRO MS9432–06)
3-2 MS9432 72-50-00 FIGURE BOLT, TEE–HEAD, 21 35-40 MM 72-
–06 3 0.190–32 X 0.500 IN. lb in. 50-00
(12.70 MM) (REF 250
CEB 1181)
(ALL POSNS UNLESS
OTHERWISE
SPECIFIED)
3-3 6876097 72-50-00 FIGURE BOLT, 0.190–32 X 3 35-40 MM 72-
3 0.500 IN. (12.70 MM) lb in 50-00
(POSNS 3,10,17)
 Nama : Marshell Glizer Sorondanya
NIM : 221221039
Kelas. : 2B - TEKNIK AERONAUTIKA
Kelompok :3
Mata Kuliah : Perkakas Pesawat Udara

IDENTIFICATION FASTENER ENGINE ALLISON M250-C20B

TURBINE ASSY (EXHAUST COLLECTOR & POWER TURBINE ROTOR) (250–
C20, –C20B, –C20C, –C20F, –C20J)

Fig Part ATA Figure Nomenclature Unit Torque Wrench Reference

Item Number Index Per (ukuran)
Assy
2 6810063 72-50-00 FIGURE NUT, SLFLKG, 0.190–32 24 Roll-
–1032 3 (FRO MS21043–3) Royce
250-C20
2 MS2104 72-50-00 FIGURE NUT, SLFLKG, 0.190–32 24 Roll-
3–3 3 Royce
250-C20
3 MS9432 72-50-00 FIGURE BOLT, TEE–HEAD, 16 (11.13 Roll-
–05 3 0.190–32 X 0.438 IN. MM) Royce
(11.13 MM) (REF 250 250-C20
CEB 1181) (FRO
MS9432–06 &
6876097)
3 MS9432 72-50-00 FIGURE BOLT, TEE–HEAD, 21 (14.27 Roll-
–07 3 0.190–32 X 0.562 IN. MM) Royce
(14.27 MM) (FRO 250-C20
MS9432–06)
3 MS9432 72-50-00 FIGURE . BOLT, TEE–HEAD, 21 (12.70 Roll-
–06 3 0.190–32 X 0.500 IN. MM) Royce
(12.70 MM) (REF 250 250-C20
CEB 1181) (ALL POSNS
UNLESS OTHERWISE
 SPECIFIED)
3 6876097 72-50-00 FIGURE BOLT, 0.190–32 X 0.500 3 (12.70 Roll-
3 IN. (12.70 MM) (POSNS MM) Royce
3,10,17) 250-C20
3 6876097 72-50-00 FIGURE BOLT, MACH, SLAB HD, AR (12.70 Roll-
–01 3 0.190–32 X 0.500 IN. MM) Royce
(12.70 MM)SHOULDER 250-C20
DIA, 0.2245–0.2250 IN. (5.702–
(5.702–5.715 MM) 5.715
(SERV USE & SPARE MM)
PARTS PROC)