High Pressure Pumps
High Pressure Pumps
High Pressure Pumps
Best
highHigh Pressure & Drilling
performance Technology
in high pressure
HIGH PRESSURE PUMPS:
OUR 4 PRODUCT DIVISIONS.
1.
HIGH PRESSURE PUMPS
FOR WATERJET CUTTING.
2.
PEROXIDE DOSING PUMPS
FOR LDPE SYSTEMS.
3.
PRESSURE TESTING
PUMPS AND SYSTEMS.
4.
AUTOFRETTAGE SYSTEMS.
HIGH PRESSURE PUMPS
1. FOR WATERJET CUTTING (420 MPa).
2 DIFFERENT APPROACHES!
Today, there are two fundamentally different approaches to
waterjet technology: pure waterjet and abrasive waterjet. Appli-
cations can handle material thicknesses of up to approx. 300 mm.
THE WATERJET.
Waterjet cutting relies on a highly focused jet. Waterjet diameters
are between 0.10 and 0.45 mm. To achieve the required energy
concentration, pressures of up to 420 MPa are required to generate
the jet. This is equivalent to the pressure a 42 km column of water
would exert on the ground.
STAND-BY INTENSIFIERS
offer redundancy and improve the availability of the dosing pump.
Switch-over can be effected directly at the pump or remotely controlled
via the central control unit (DCS).
AUTOFRETTAGE
4. SYSTEMS (1,200 MPa).
CERTIFICATES
AD 2000-Merkblatt
HP 0 / HP 100 R
and EN ISO 3834-2
according to
PED 97/23/EC