No : F/QCL/008 Rev.

01

MATERIAL SAFETY DATA SHEET

STARCH SOLUBLE

Revision : 00 Date: 05.03.2019 MSDS Number : 234

Section 1 - Chemical Product and Company Identification

1.1 Product Name : STARCH SOLUBLE

Synonyms : Starch, soluble; Amylodextrin; Amglogen; Sugar polymer
CAS No. : 9005-84-9
HS Code : 3505 10 90
Molecular Weight : (162.14)n
Chemical Formula : (C₆H₁₀O₅)n
Product Code : A-2089
Brand : SMART-LAB
1.2 Manufacturer :PT.Smart-Lab Indonesia
Address : Ruko Boulevard TamanTekno Blok E No.10 -11BSD SektorXI
Serpong, Tangerang - Indonesia
Website :www.smartlab.co.id
Email :sales@smartlab.co.id
For information :Telp: +62-21- 7588 0205(Hunting) , fax:+62-21-7588 0198
1.3 Application : General Chemical reagent
Emergency Telephone: +62-21-7588 0205(Hunting)

Section 2 - Hazards Identification

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.

2.2 Label elements

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.

2.3 Other hazards

This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Section 3 - Composition, Information on Ingredients

3.1 Substances
Synonyms : Dihydrogen Sodium Phosphate; Sodium dihydrogen phosphate dihydrate; Sodium
Biphosphate dihydrate; Sodium Phosphate Monobasic, dihydrate
Formula : (C₆H₁₀O₅)n
Molecular weight : (162.14)n
CAS-No. : 9005-84-9
EC-No. : 232-679-6

Section 4 - First Aid Measures

4.1 Description of first aid measures

General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
PT.SMART-LAB INDONESIA MSDS – STARCH SOLUBLE 1
No : F/QCL/008 Rev. 01

MATERIAL SAFETY DATA SHEET

STARCH SOLUBLE

Revision : 00 Date: 05.03.2019 MSDS Number : 234

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11

4.3 Indication of any immediate medical attention and special treatment needed
No data available

Section 5 - Firefighting Measures

5.1 Extinguishing media

Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2 Special hazards arising from the substance or mixture

Carbon oxides

5.3 Advice for firefighters

Wear self-contained breathing apparatus for firefighting if necessary.

5.4 Further information

No data available

Section 6 - Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Do not let product enter drains.

6.3 Methods and materials for containment and cleaning up

Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers
for disposal.

6.4 Reference to other sections

For disposal see section 13.

Section 7 - Handling and Storage

7.1 Precautions for safe handling

Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.
PT.SMART-LAB INDONESIA MSDS – STARCH SOLUBLE 2
No : F/QCL/008 Rev. 01

MATERIAL SAFETY DATA SHEET

STARCH SOLUBLE

Revision : 00 Date: 05.03.2019 MSDS Number : 234

7.2 Conditions for safe storage, including any incompatibilities

Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

7.3 Specific end use(s)

Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

Section 8 - Exposure Controls, Personal Protection

8.1 Control parameters

8.2 Exposure controls
Appropriat engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Personal protective equipment

Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands.

The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC
and the standard EN 374 derived from it.

Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril®

Splash contact
Material: Nitrile rubber Minimum
layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril®

Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be
selected according to the concentration and amount of the dangerous substance at the specific
workplace.

Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are
desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and
components tested and approved under appropriate government standards such as NIOSH
(US) or CEN (EU).

Control of environmental exposure

Do not let product enter drains.

PT.SMART-LAB INDONESIA MSDS – STARCH SOLUBLE 3

No : F/QCL/008 Rev. 01

MATERIAL SAFETY DATA SHEET

STARCH SOLUBLE

Revision : 00 Date: 05.03.2019 MSDS Number : 234

Section 9 - Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Appearance Form: solid
Colour: white
Odour No data available
Odour Threshold No data available
pH No data available
Melting point/freezingpoint Melting point/range: 256 - 258 °C
Initial boiling point and boiling range No data available
Flash point No data available
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper/lower flammability or No data available
explosive limits No data available
Vapour pressure No data available
Vapour density No data available
Relative density No data available
Water solubility No data available
Partition coefficient: noctanol/water No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity No data available
Explosive properties No data available
Oxidizing properties No data available

9.2 Other safety information

No data available

Section 10 - Stability and Reactivity

10.1 Reactivity
No data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

No data available

10.4 Conditions to avoid

No data available

10.5 Incompatible materials

Strong oxidizing agents

10.6 Hazardous decomposition products

Hazardous decomposition products formed under fire conditions. - Carbon oxides
Other decomposition products - No data available
In the event of fire: see section 5

PT.SMART-LAB INDONESIA MSDS – STARCH SOLUBLE 4

No : F/QCL/008 Rev. 01

MATERIAL SAFETY DATA SHEET

STARCH SOLUBLE

Revision : 00 Date: 05.03.2019 MSDS Number : 234

Section 11 - Toxicological Information

11.1 Information on toxicological effects

Acute toxicity
No data available
LD50 Intraperitoneal - Mouse - 6.600 mg/kg

Skin corrosion/irritation
Skin - Human
Result: Mild skin irritation - 3 h

Serious eye damage/eye irritation

No data available

Respiratory or skin sensitisation

No data available

Germ cell mutagenicity

No data available

Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.

Reproductive toxicity
No data available

Specific target organ toxicity - single exposure

No data available

Specific target organ toxicity - repeated exposure

No data available

Aspiration hazard
No data available

Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

Section 12 - Ecological Information

12.1 Toxicity
No data available

12.2 Persistence and degradability

No data available

12.3 Bioaccumulative potential

No data available

PT.SMART-LAB INDONESIA MSDS – STARCH SOLUBLE 5

No : F/QCL/008 Rev. 01

MATERIAL SAFETY DATA SHEET

STARCH SOLUBLE

Revision : 00 Date: 05.03.2019 MSDS Number : 234

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

12.6 Other adverse effects

No data available

Section 13 - Disposal Considerations

13.1 Waste treatment methods

Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.

Contaminated packaging
Dispose of as unused product.

Section 14 - Transport Information

14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
Further information
No data available

Section 15 - Regulatory Information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out

Section 16 - Additional Information

PT.SMART-LAB INDONESIA MSDS – STARCH SOLUBLE 6

No : F/QCL/008 Rev. 01

MATERIAL SAFETY DATA SHEET

STARCH SOLUBLE

Revision : 00 Date: 05.03.2019 MSDS Number : 234

National Fire Protection Association (U.S.A.):

Health: 0
Flammability: 0
Reactivity: 0

Further information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as
a guide. The information in this document is based on the present state of our knowledge and is applicable to
the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties
of the product. PT. Smartlab Indonesia Corporation and its Affiliates shall not be held liable for any damage
resulting from handling or from contact with the above product. See www.sigmaaldrich.com and/or the reverse
side of invoice or packing slip for additional terms and conditions of sale.

PT.SMART-LAB INDONESIA MSDS – STARCH SOLUBLE 7