dino sa ur p lush b un dle 1 em b ro i d ery d es i g n

raptor feather body markings colors:

These marking designs are intended for two of the body pieces for the
Raptor from the Carnivore Dinosaur Plush Sewing Pattern. The A
feather design is intended for a feathered version of a raptor.
Because the markings have nearly identical instructions and colors, they're
all grouped together here for efficiency. The main thing separating them B
are the location of the markings and their alignment guides.

COLORS:
colors needed: 1
• markings
color changes: 2

raptor body feathers 4x4 raptor body feathers 5x7

SIZE: 81mm x 83mm (3.2 in x 3.3 in) SIZE: 127mm x 68mm (5 in x 2.7 in)
FABRIC: One 8" x 12" piece of fabric for body (B6) FABRIC: One 8" x 12" piece of fabric for body (B6)

raptor leg feathers

SIZE: 81mm x 75mm (3.2 in x 3 in)
FABRIC: One 6" x 7" piece of fabric for outer leg (B8)

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 2 em b ro i d ery d es i g n

1 2 3

color a
hoop your fabric 4x4 size: markings
• See the steps in the original hoop your fabric • A color several shades lighter
embroidery instrucions that • The 4" x 4" version is placed or darker than your main
go over how to hoop your diagonally to fit in the hoop. fabric works nicely here.
fabric.
• Be sure to hoop your fabric
• Before starting the diagonally as well so the
embroidery, cut a square of design fits on your fabric.
wash-away stabilizer that
covers the embroidery area. • Either hoop your fabric
Use masking tape to tape it in with the top water-soluble
place. stabilizer, or tape it on top
afterwards.

4 5a 5b

color b
alignment line cut the fabric
• Any color can be used for a. When finished embroidering, remove the hoop from the
this step. machine. Rip off the water-soluble stabilizer and cut away the
• This will create a guideline backing stabilizer.
Align various body patterns onto the embroidery, matching up
for cutting the pattern piece
later. the paper pattern with the alignment stitching.
b. Pin the paper pattern in place (or trace the outline). Cut around
the pattern. Use the fabric as usual with the rest of the main
pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 3 em b ro i d ery d es i g n

wing accent feathers colors:

These wing designs are intended for COLORS:
two styles of wings for the Raptor colors needed: 1
from the Carnivore Dinosaur • applique outline A
Plush Sewing Pattern. The open color changes: 5
wing is an outstretched wing while
the bent wing is bent at the elbow. B
Because the feathers have nearly
identical instructions and colors,
they're all grouped together here
for efficiency. The main thing C
separating them are the location
of the feathers and their alignment
guides.

raptor open wing 5x7

SIZE: 152mm x 77mm (6 in x 3 in)
FABRIC: Two 10" x 8" pieces of fabric for open wing (B19)
Two 7" x 5" pieces of accent fabric for wing applique

raptor bent wing 4x4 raptor body feathers 5x5

SIZE: 94mm x 99mm (3.7 in x 3.9 in) SIZE: 108mm x 85mm (4.3 in x 3.3 in)
FABRIC: Two 10" x 8" pieces of fabric for bent wing (B20) FABRIC: Two 10" x 8" pieces of fabric for bent wing (B20)
Two 7" x 5" pieces of accent fabric for wing applique Two 7" x 5" pieces of accent fabric for wing applique

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 4 em b ro i d ery d es i g n

1 2 3

color a
hoop your fabric 4x4 size: applique placement
• The sample is hooped with hoop your fabric • Any color can be used for
the floating method, so the • The 4" x 4" version is placed this.
fabric is adhered to the top
of heavy-weight tear-away
diagonally to fit in the hoop. • This creates a guideline for
stabilizer. Water-soluble • Be sure to hoop your fabric placing the applique fabric
diagonally as well so the next.
stabilizer is taped on top in a
later step. design fits on your fabric.
• Either hoop your fabric
with the top water-soluble
stabilizer, or tape it on top
afterwards.

4a 4b 4c

place the applique fabric

a. Remove the hoop from your machine. Trim the threads.
b. Place the applique fabric over the outline, right sides up.
c. Tape the edges of the fabric in place to hold for the next stitching.
Place the hoop back in the machine.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 5 em b ro i d ery d es i g n

5 6a 6b
trim
along
edge

color b
cutting line trim the applique fabric
• Use a color that matches a. Remove the hoop from the machine. Trim the threads.
your applique fabric for this
b. Trim the applique fabric as close as you can to the previous
step.
stitching. Use curved embroidery scissors for the best result.
• This creates the cutting line
for the applique.

7a 7b 8
add top
stabilizer

clean up
stray fuzz
color c
add the top stabilizer applique edge
a. Run a lint roller over the cut edges if using a fur fabric like • Use a color that matches
minky. This will eliminate any stray fuzz. your applique fabric for this
step.
b. Tape water-soluble stabilizer over the whole embroidery area.
Place the hoop back in the machine. • This creates satin stitching
that will cover the cut edges
of your applique fabric.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 6 em b ro i d ery d es i g n

9a 9b 9c

cut the fabric

a. When finished embroidering, remove the hoop from the machine. Rip off the water-soluble
stabilizer and cut away the backing stabilizer.
b. Align your wing pattern onto the embroidery, matching up the paper pattern with the alignment
stitching.
c. Pin the paper pattern in place (or trace the outline). Cut around the pattern. Use the fabric as usual
with the rest of the main pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 7 em b ro i d ery d es i g n

ankylosaurus eye: colors:

SIZE: 71mm x 87mm (2.8 in x 3.4 in)
A
COLORS:
colors needed: 4 B
• eye
• eye highlight C
• eye shine
• blush D
color changes: 5

FABRIC: E
• Two 6" x 8" pieces of fabric for head
side (A)

before you begin: load your file

• Load the file labeled "Ankylosaurus Eye" into your machine.
Choose either right or left for your first embroidery. You'll need to choose the other for the next.

1 2 3

color a color b
hoop your fabric blush eye
• See the steps in the original • Pink works well for this step. • Black works nicely for this
embroidery instrucions that
• You could also skip this step
step.
go over how to hoop your
fabric.
entirely if you'd rather not • This will stitch the eye.
have blush.
• Before starting the
embroidery, cut a square of
wash-away stabilizer that
covers the embroidery area.
Use masking tape to tape it in
place.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 8 em b ro i d ery d es i g n

4 5 6

color c color d color e

eye highlight eye shine alignment line
• A dark accent color works • White works well for this • Any color can be used for
nicely for this step. step. this step.
• This will create a guideline
for cutting the pattern piece
later.

7a 7b 7c

cut the fabric

a. When finished embroidering, remove the hoop from the machine. Rip off the water-soluble
stabilizer and cut away the backing stabilizer.
b. Align the head side (A) pattern onto the embroidery, matching up the paper pattern with the
alignment stitching.
c. Pin the paper pattern in place (or trace the outline). Cut around the pattern. Use the fabric as usual
with the rest of the main pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 9 em b ro i d ery d es i g n

ankylosaurus
nostrils: colors:

SIZE: 84mm x 64mm (3.3 in x 2.5 in)

A
COLORS:
colors needed: 1
• nostrils
color changes: 2 B
FABRIC:
• 7" x 5" piece of fabric for upper
beak (D)

1 2 3

color a color b
hoop your fabric nostrils alignment line
• See the steps in the original • Black or a color several • Any color can be used for
embroidery instrucions that shades darker than your this step.
go over how to hoop your
fabric.
main fabric would work well
here.
• This will create a guideline
for cutting the pattern piece
• Before starting the later.
embroidery, cut a square of
wash-away stabilizer that
covers the embroidery area.
Use masking tape to tape it in
place.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 10 em b ro i d ery d es i g n

4a 4b 4c

cut the fabric

a. When finished embroidering, remove the hoop from the machine. Rip off the water-soluble
stabilizer and cut away the backing stabilizer.
b. Align the upper beak (D) pattern onto the embroidery, matching up the paper pattern with the
alignment stitching.
c. Pin the paper pattern in place (or trace the outline). Cut around the pattern. Then repeat again for
the other side.
Use the fabric as usual with the rest of the main pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 11 em b ro i d ery d es i g n

ankylosaurus toe nails colors:

These designs are intended for two of the body pieces for the
Ankylosaurus. A
Because the nails have nearly identical instructions and colors, they're all
grouped together here for efficiency. The main thing separating them are
the location of the nails and their alignment guides. B
COLORS:
colors needed: 1
• nails
color changes: 2

inner toes
SIZE: 75mm x 57mm (3 in x 2.2 in)
FABRIC: Two 9" x 5" pieces of fabric for inner leg (G & H)

outer toes 5x7 outer toes 4x4

SIZE: 170mm x 47mm (6.7 in x 1.9 in) SIZE: 97mm x 97mm (3.8 in x 3.8 in)
FABRIC: Two 13" x 6" pieces of fabric for body (I) FABRIC: Two 13" x 6" pieces of fabric for body (I)

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 12 em b ro i d ery d es i g n

1 2 3

color a
hoop your fabric 4x4 size: toenails
• See the steps in the original hoop your fabric • A light accent color like white
embroidery instrucions that • The 4" x 4" version is placed or cream works nicely for this
go over how to hoop your diagonally to fit in the hoop. step
fabric.
• Be sure to hoop your fabric
• Before starting the diagonally as well so the
embroidery, cut a square of design fits on your fabric.
wash-away stabilizer that
covers the embroidery area. • Either hoop your fabric
Use masking tape to tape it in with the top water-soluble
place. stabilizer, or tape it on top
afterwards.

4 5a 5b

color b
alignment line cut the fabric
• Any color can be used for a. When finished embroidering, remove the hoop from the
this step. machine. Rip off the water-soluble stabilizer and cut away the
• This will create a guideline backing stabilizer.
Align various body patterns onto the embroidery, matching up
for cutting the pattern piece
later. the paper pattern with the alignment stitching.
b. Pin the paper pattern in place (or trace the outline). Cut around
the pattern. Use the fabric as usual with the rest of the main
pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 13 em b ro i d ery d es i g n

parasaurolophus
eye: colors:

SIZE: 83mm x 83mm (3.3 in x 3.3 in)

A
COLORS: B
colors needed: 4
• eye C
• eye highlight
• eye shine D
• blush
color changes: 5 E
FABRIC:
• Two 7" x 7" pieces of fabric for head
side (A)

before you begin: load your file

• Load the file labeled "Parasaurolophus Eye" into your machine.
Choose either right or left for your first embroidery. You'll need to choose the other for the next.

1 2 3

color a color b
hoop your fabric blush eye
• See the steps in the original • Pink works well for this step. • Black works nicely for this
embroidery instrucions that
• You could also skip this step
step.
go over how to hoop your
fabric.
entirely if you'd rather not • This will stitch the eye.
have blush.
• Before starting the
embroidery, cut a square of
wash-away stabilizer that
covers the embroidery area.
Use masking tape to tape it in
place.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 14 em b ro i d ery d es i g n

4 5 6

color c color d color e

eye highlight eye shine alignment line
• A dark accent color works • White works well for this • Any color can be used for
nicely for this step. step. this step.
• This will create a guideline
for cutting the pattern piece
later.

7a 7b 7c

cut the fabric

a. When finished embroidering, remove the hoop from the machine. Rip off the water-soluble
stabilizer and cut away the backing stabilizer.
b. Align the head side (A) pattern onto the embroidery, matching up the paper pattern with the
alignment stitching.
c. Pin the paper pattern in place (or trace the outline). Cut around the pattern. Use the fabric as usual
with the rest of the main pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 15 em b ro i d ery d es i g n

parasaurolophus
nostrils: colors:

SIZE: 54mm x 59mm (2.1 in x 2.3 in)

A
COLORS:
colors needed: 1
• nostrils
color changes: 2 B
FABRIC:
• 5" x 13" piece of fabric for upper
crest (D)

1 2 3

color a color b
hoop your fabric nostrils alignment line
• See the steps in the original • Black or a color several • Any color can be used for
embroidery instrucions that shades darker than your this step.
go over how to hoop your
fabric.
main fabric would work well
here.
• This will create a guideline
for cutting the pattern piece
• Before starting the later.
embroidery, cut a square of
wash-away stabilizer that
covers the embroidery area.
Use masking tape to tape it in
place.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 16 em b ro i d ery d es i g n

4a 4b 4c

cut the fabric

a. When finished embroidering, remove the hoop from the machine. Rip off the water-soluble
stabilizer and cut away the backing stabilizer.
b. Align the upper crest (D) pattern onto the embroidery, matching up the paper pattern with the
alignment stitching.
c. Pin the paper pattern in place (or trace the outline). Cut around the pattern.
Use the fabric as usual with the rest of the main pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 17 em b ro i d ery d es i g n

parasaurolophus toe nails colors:

These designs are intended for two of the body pieces for the
Parasaurolophus. A
Because the nails have nearly identical instructions and colors, they're all
grouped together here for efficiency. The main thing separating them are
the location of the nails and their alignment guides. B
COLORS:
colors needed: 1
• nails
color changes: 2

inner leg toes arms

SIZE: 80mm x 50mm (3.1 in x 2 in) SIZE: 91mm x 94mm (3.6 in x 3.7 in)
FABRIC: 9" x 5" piece of fabric for inner legs (I) FABRIC: Two 8" x 6" pieces of fabric for arms (K)

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 18 em b ro i d ery d es i g n

1 2 3

color a color b
hoop your fabric toenails alignment line
• See the steps in the original • A light accent color like white • Any color can be used for
embroidery instrucions that or cream works nicely for this this step.
go over how to hoop your
fabric.
step
• This will create a guideline
for cutting the pattern piece
• Before starting the later.
embroidery, cut a square of
wash-away stabilizer that
covers the embroidery area.
Use masking tape to tape it in
place.

4a 4b 4c

cut the fabric

a. When finished embroidering, remove the hoop from the machine. Rip off the water-soluble
stabilizer and cut away the backing stabilizer.
b. Align various body patterns onto the embroidery, matching up the paper pattern with the alignment
stitching.
c. Pin the paper pattern in place (or trace the outline). Cut around the pattern. Use the fabric as usual
with the rest of the main pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 19 em b ro i d ery d es i g n

parasaurolophus body colors:

This designs is intended for the main body for the Parasaurolophus.
They are two different sizes to accommodate smaller embroidery hoops. A
Because the markings have nearly identical instructions and colors, they're
all grouped together here for efficiency. The main thing separating them
are the alignment and orientation and the alignment guides. B
COLORS:
colors needed: 1
• stripes
color changes: 2

body stripes 4x4 body stripes 5x7

SIZE: 99mm x 95mm (3.9 in x 3.7 in) SIZE: 113mm x 72mm (4.4 in x 2.8 in)
FABRIC: Two 11" x 9" pieces of fabric for body (F) FABRIC: Two 11" x 9" pieces of fabric for body (F)

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 20 em b ro i d ery d es i g n

1 2 3

color a
hoop your fabric 4x4 size: markings
• See the steps in the original hoop your fabric • A color several shades lighter
embroidery instrucions that • The 4" x 4" version is placed or darker than your main
go over how to hoop your diagonally to fit in the hoop. fabric works nicely here.
fabric.
• Be sure to hoop your fabric
• Before starting the diagonally as well so the
embroidery, cut a square of design fits on your fabric.
wash-away stabilizer that
covers the embroidery area. • Either hoop your fabric
Use masking tape to tape it in with the top water-soluble
place. stabilizer, or tape it on top
afterwards.

4 5a 5b

color b
alignment line cut the fabric
• Any color can be used for a. When finished embroidering, remove the hoop from the
this step. machine. Rip off the water-soluble stabilizer and cut away the
• This will create a guideline backing stabilizer.
for cutting the pattern piece b. Align the body (F) pattern onto the embroidery, matching up
later. the paper pattern with the alignment stitching.
Pin the paper pattern in place (or trace the outline). Cut around
the pattern. Use the fabric as usual with the rest of the main
pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 21 em b ro i d ery d es i g n

parasaurolophus
outer legs: colors:

SIZE: 80mm x 94mm (3.1 in x 3.7 in) A

COLORS:
colors needed: 1
• stripes B
• toe nails
color changes: 2

FABRIC:
C
• Two 7" x 8" pieces of fabric for
outer legs (H)

1 2 3

color a color a
hoop your fabric markings toenails
• See the steps in the original • A color several shades lighter • A light accent color like white
embroidery instrucions that or darker than your main or cream works nicely for this
go over how to hoop your fabric works nicely here. step
fabric.
• Before starting the
embroidery, cut a square of
wash-away stabilizer that
covers the embroidery area.
Use masking tape to tape it in
place.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.
 dino sa ur p lush b un dle 22 em b ro i d ery d es i g n

color b
alignment line
• Any color can be used for
this step.
• This will create a guideline
for cutting the pattern piece
later.

5a 5b 5c

cut the fabric

a. When finished embroidering, remove the hoop from the machine. Rip off the water-soluble
stabilizer and cut away the backing stabilizer.
b. Align the outer leg (H) pattern onto the embroidery, matching up the paper pattern with the
alignment stitching.
c. Pin the paper pattern in place (or trace the outline). Cut around the pattern.
Use the fabric as usual with the rest of the main pattern instructions.

sew desu ne?

| www.cholyknight.com |
// ©2021 Choly Knight // Items sewn using this design may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this design as your own in digital or printed form.