Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    WalrusAudio Canvas Stereo Translations

    Uploaded by

    Mac Miña
    The Walrus Audio Canvas Stereo is a line isolator and direct injection device that converts unbalanced 1/4" inputs to balanced XLR outputs. It comes in a stompbox format for easy use on pedalboards. It has options for DI mode for high impedance sources like guitars and LI mode for low impedance sources. It provides a balanced signal to recording interfaces or mixers while maintaining a flat frequency response and low distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WalrusAudio Canvas Stereo Translations

    Uploaded by

    Mac Miña
    6 views3 pages
    The Walrus Audio Canvas Stereo is a line isolator and direct injection device that converts unbalanced 1/4" inputs to balanced XLR outputs. It comes in a stompbox format for easy use on pedalboards. It has options for DI mode for high impedance sources like guitars and LI mode for low impedance sources. It provides a balanced signal to recording interfaces or mixers while maintaining a flat frequency response and low distortion.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Walrus Audio Canvas Stereo is a line isolator and direct injection device that converts unbalanced 1/4" inputs to balanced XLR outputs. It comes in a stompbox format for easy use on pedalboards. It has options for DI mode for high impedance sources like guitars and LI mode for low impedance sources. It provides a balanced signal to recording interfaces or mixers while maintaining a flat frequency response and low distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views3 pages

    WalrusAudio Canvas Stereo Translations

    Uploaded by

    Mac Miña
    The Walrus Audio Canvas Stereo is a line isolator and direct injection device that converts unbalanced 1/4" inputs to balanced XLR outputs. It comes in a stompbox format for easy use on pedalboards. It has options for DI mode for high impedance sources like guitars and LI mode for low impedance sources. It provides a balanced signal to recording interfaces or mixers while maintaining a flat frequency response and low distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    WALRUS AUDIO CANVAS STEREO (Line Isolator & D.I.

    • Item: 63316
    • EAN: 810424034228
    • Packaging dimensions: 14.6 x 10.7 x 6.4 cm
    • Weight: 0.44 kg
    • Pictures | Translations | Manual

    Need to know for Retailers


    • Canvas is Walrus Audio’s first line of DI Boxes: Mono & Stereo version available
    • Convert your unbalanced signal into a balanced signal for interfacing properly with e.g. your recording
    interface or FOH mixer
    • Select between DI or LI (line isolator) mode
    o DI Mode = for high impedane sources such as E-Guitars or Basses
    o LI Mode = for low impedance line level sources such as Amp-sims (e.g. ACS1) or Keyboards
    • Fully passive – no power required
    • Stompbox format for super easy integration on pedalboard
    • Coolest looking DI Box on the market

    Full Feature List


    • Passive Line Isolator and Direct Injection device
    • Converts ¼” unbalanced input to XLR balanced output
    • For interfacing with your recording interface or FOH mixer
    • Works perfectly with amp-in-a-box devices e.g. Walrus Audio ACS1
    • Stompbox format for easy integration on pedalboards
    • Choose between DI- or Line-Isolator-Mode
    • Flat frequency response from 20Hz-20kHz
    • Custom wound transformers for low THD and full frequency response
    • Transformer isolated output
    • Sum switch
    o When disengaged (out), the left input connects to the left thru. The right input connects to the
    right thru allowing the use of stereo amplifiers
    o When engaged (in), Sum connects the left and right thru jacks together to combine the signals
    for running into a single amplifier (use either thru jack)
    • Pad: Enabled a -15dB input pad (only in D.I. mode) to minimize distortion
    • GND Lift: Isolates GND pin on XLR to reduce hum
    • Passive design – no power required
    • Made in the USA

    FACE BVBA • HOEK 76 - UNIT 301 - 2850 BOOM • +32 3 844 67 97 • H.R. ANTWERPEN 291868 • VAT/TVA/BTW 0448 180 481 • INFO@FACE-BE.EU
    Description
    Consider this your clean slate. The Canvas Stereo is a Direct Box/LIne Isolator designed to remove any
    resistance between you and your audience by giving a pristine, sonic foundation to build your stereo
    masterpiece upon. From houses of worship to the dive bar downtown, Canvas Stereo is built to be the
    performance tool that goes wherever you are making your music.

    Canvas Stereo is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced
    signals into balanced signals for interfacing properly with your recording interface or mixer at front-of-
    house. If you’re using an amp-in-a-box (DSP Guitar Rig), like our ACS1, keyboards, or any other instrument
    utilizing both left and right outputs, then the Canvas Stereo is your new bridge to the front-of-house. The
    Canvas Series DIs pack everything you need from a DI/LI into a standard pedal-sized enclosure designed to
    look great right on top of your board.

    Direct Injection

    Use DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The
    signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the
    transformer connected to the XLR output. Use the gain on your mixer or preamp to bring the signal up to
    line level.

    Line Isolator

    Use LI mode when connecting your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys,
    etc.). The signal will remain full volume and be converted to a balanced signal via the transformer connected
    to the XLR output. Less preamp gain will be required in LI mode.

    DI or LI?

    When deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of
    the device you are wanting to interface with.
    For a general guide:
    • High Impedance = anything above 1k = Use DI
    • Low Impedance = less than 1k = Use LI

    Troubleshooting

    This is a passive device, so you will not damage anything if connected improperly, but it could affect the
    signal level and frequency response if not connected properly. This is an easy thing to test since the LI/DI
    switch is built into Canvas. If you lose high-frequency information when using LI mode, then you should
    probably be in DI mode.

    FACE BVBA • HOEK 76 - UNIT 301 - 2850 BOOM • +32 3 844 67 97 • H.R. ANTWERPEN 291868 • VAT/TVA/BTW 0448 180 481 • INFO@FACE-BE.EU
    Pictures Canvas Stereo

    B2B Resources Download Link

    FACE BVBA • HOEK 76 - UNIT 301 - 2850 BOOM • +32 3 844 67 97 • H.R. ANTWERPEN 291868 • VAT/TVA/BTW 0448 180 481 • INFO@FACE-BE.EU

    You might also like