Tds PowerSpace P21000A en

TECHNICAL DATA
PowerSpace P21000A PROFESSIONAL
versatile power amplifier
Product Description Applications

Ideal for zone-expansion applications, Bose PowerSpace amplifiers Retail stores
enhance any premium commercial sound installation with clean, reliable
power — and digital connectivity. A Bose AmpLink input allows for Restaurants and bars
multiple channels of uncompressed, low-latency digital audio from
Bose DSPs via a single Cat 5 cable. The PowerSpace P21000A provides Hospitality venues
1000 watts per channel and features versatile outputs that give you the
flexibility to deliver full channel power to either low- or high-impedance Conference centers
loads — without bridging — and even send double power to a single zone.
For premium commercial applications, Bose PowerSpace amplifiers provide Schools
the power and performance to get the job done — pure and simple. Auxiliary zones
Key Features
1000 watts per channel and compatible with Bose loudspeakers, DSPs, and controls to create complete commercial
sound systems
Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations
and related points of failure
Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V)
loads without bridging
I-Share output delivers 2x power level into low-impedance (2-4 Ω) or high-impedance (70/100V) loads by combining
the current of both channels
Auto-standby mode saves power when audio signal falls below a set threshold after 20 minutes, then wakes when
audio returns
PRO.BOSE.COM 1 OF 4
PowerSpace P21000A
Technical Specifications
POWER RATING
Amplifier Power 2x 1000 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)

I-Share Mode Power 1x 2000 W (2-4 Ω, 70/100V)
Gain (Low-Z mode) 38 dB
Gain (70V mode) 35 dB
Gain (100V mode) 38 dB
AUDIO PERFORMANCE
Frequency Response 4-8 Ω: 20 Hz – 20 kHz (+/- 1 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk) > 80 dB @ 1 kHz, > 65 dB @ 20 kHz
Dynamic Range ≥ 100 dBA (at rated power)
Audio Latency < 1 ms (any analog or AmpLink input to loudspeaker output)
AUDIO INPUTS ANALOG AMPLINK
Input Channels 2 balanced 8 digital
Connectors 6-pin Euroblock RJ-45 (Input)
Input Impedance 10 kΩ
Maximum Input Level 22 dBu (at 14 dBu sensitivity setting)
Sensitivity -10 dBV / 4dBu / 14 dBu
AUDIO OUTPUTS SPEAKER AMPLINK
Outputs 2 8 digital
Connectors 4-terminal block RJ-45 (Thru)
INDICATORS AND CONTROLS
Power LED Solid white: Power is on. Blinking white: Unit is in auto standby mode. Solid red: Power supply fault.
Blinking Red: Thermal fault.
Input Signal LED Green: Signal present. Amber: Input is near clipping. Red: Input is clipping.
Output Limit LED Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Amplifier or thermal fault.
Controls, Front Panel Power On/Off
Controls, Rear Panel Amplifier mode DIP switches, input sensitivity switch, input select dial, mute, output attenuators
ELECTRICAL
Mains Voltage 100 VAC – 240 VAC (±10%, 50/60 Hz)
AC Power Consumption 120 VAC: 25 W (Auto-standby), 950 W (Max) 230 VAC: 25 W (Auto-standby), 950 W (Max)
Mains Connector Standard IEC (C14)
Protections Vpeak/Vrms limiters, high temperature, output short, extra high frequency (EHF), excessively low or high
AC line voltage
PHYSICAL
Operational Temperature Range 0 °C to 40 °C
Storage Temperature Range -40 °C to 70 °C
Dimensions (H × W × D) 44 × 483 × 420 mm (1.7 × 19.0 × 16.5 in)
Net Weight 6.6 kg (14.6 lb)
Shipping Weight 8.6 kg (19.0 lb)
Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow
PRO.BOSE.COM 2 OF 4
PowerSpace P21000A
q w e r
q POWER SWITCH – In/Out standby mode r OUTPUT 1, 2, 3, 4 LIMIT LED – Each LED operates independently
LED is amber when the amplifier is limiting the corresponding
w POWER LED
output due to exceeding the outputs’ Vpeak or Vrms limits
Solid white LED indicates power is ON LEDs will display solid red if an amplifier fault is detected
Blinking white LED indicates the unit is in auto standby mode LEDs will blink red when all outputs are muted
Solid red LED indicates a power supply fault
Blinking red LED indicates a thermal fault
e INPUT 1, 2, 3, 4 SIGNAL LED – Each LED operates independently

Green LED indicates signal is present
Amber LED indicates signal is near clipping
Red LED indicates clipping
q w e rt y u io a
q OUTPUT ATTENUATION 1, 2 – t INPUT SELECT – Dial selects if analog u ANALOG INPUTS – Balanced 6-pin
Output attenuators for each output. or AmpLink audio inputs are used. Euroblock line-level input connector
Turn the controls clockwise to The default state is analog 1:1
decrease attenuation and counter- i UPDATE – Firmware updates
clockwise to increase attenuation y AMPLINK – INPUT RJ-45 connector
that receives up to 8 digital channels o GAIN/SENSITIVITY – Slide switch
w MUTE – Contact closure connection from a Bose AmpLink product. The to set gain/sensitivity setting
where a short across the mute amp also supports a THRU path for
connector will mute all outputs. daisy-chaining all 8 digital audio
Mute polarity can be inverted channels to up to 8 other Bose
o AC INLET – Removing the AC cord
when the amplifier is on is equivalent
by a DIP switch AmpLink products, at a maximum to powering down using the front
distance of 10 m between products. panel power switch and is an
e OUTPUT – 4-terminal block connector CAUTION: Shielded EIA/TIA acceptable power-down method
for loudspeaker connections. Each 568B straight Cat 5 cable, or
channel can deliver up to 1000 watts equivalent, is required for proper
regardless of load into 4 Ω, 8 Ω, 70V, AmpLink operation, 1 m cable
or 100V. Outputs can be I-Shared included. Unshielded cable is
not supported and may cause
AmpLink to operate improperly.
r DIP SWITCHES – A bank of switches
Do NOT connect either RJ-45 port
used to set amplifier configuration
to an Ethernet-based network
PRO.BOSE.COM 3 OF 4
PowerSpace P21000A
Mechanical Diagrams
For additional specifications and application information, please visit PRO.BOSE.COM. Specifications subject to change without notice. 03/2020
PRO.BOSE.COM 4 OF 4

Tds PowerSpace P21000A en

Uploaded by

Copyright:

Available Formats

Tds PowerSpace P21000A en

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tds PowerSpace P21000A en

Uploaded by

Copyright:

Available Formats

TECHNICAL DATA

PowerSpace P21000A PROFESSIONAL

versatile power amplifier

Product Description Applications

Amplifier Power 2x 1000 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)

e INPUT 1, 2, 3, 4 SIGNAL LED – Each LED operates independently

You might also like