Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 239 views

    Soluble Oakflo 800

    Uploaded by

    slpampcpo

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Soluble Oakflo 800

    Uploaded by

    slpampcpo
    239 views2 pages

    Original Title

    soluble oakflo 800

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    239 views2 pages

    Soluble Oakflo 800

    Uploaded by

    slpampcpo

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    OAKFLO® DSO 5800

    SOLUBLE OIL, METALWORKING FLUID CONCENTRATE

    ®
    APPLICATIONS OAKFLO DSO 5800 is a heavy –duty soluble oil, metalworking fluid
    designed for moderate to severe-duty machining operations on
    aluminum.

    Metals: Aluminum Alloys (2024, 6061, 7050, 7075), Cast Aluminum


    Alloys (380, 390), Cast Iron, Nodular Iron, Carbon Steels, Stainless
    Steels, Titanium, Other Exotic Alloys

    Duty Range: For moderate to severe-duty operations

    ®
    FEATURES & OAKFLO DSO 5800 blends synthetically modified, vegetable oils with
    BENEFITS the aluminum lubricating capabilities of premium soluble oils to deliver
    excellent lubricity in aluminum machining.

    EXCELLENT LUBRICITY – Provides a tenacious lubricant film that


    enhances hydrodynamic lubricity, preventing galling and metal buildup
    on the tools. Taps stay clean and free from buildup. High silicon
    aluminums cut cleanly with reduced tool wear.

    REDUCES MANUFACTURING COSTS – Increases tool life in critical


    operations, such as drilling, reaming and tapping, allowing extended
    production runs between tool changes.

    EXCELLENT SURFACE FINISHES – Has lubricants that bind to the


    metal surface and form a barrier between the tool and the cut chip
    leading to bright and unmarred surface finishes.

    EXCELLENT CORROSION CONTROL – Non-staining on aluminum.


    Provides corrosion control for ferrous metals and machine parts.

    OPERATOR FRIENDLY – Mild to skin – Easy to mix.


    RECOMMENDED FOR INDUSTRIAL USE ONLY
    STARTING Use between 7.0% (1:14) and 12% (1:8.5) for moderate to severe-
    DILUTIONS duty machining operations on aluminum.
    ®
    OAKFLO DSO 5800 is to be mixed with water for use. Add concentrate
    to water and stire or circulate to insure thorough mixing.

    Add no other substances to the concentrate or mix unless approved by


    Oak Signature Technical Services. Not recommended for use with
    magnesium or alloyed magnesium.

    For concentration analysis, use the Total Alkalinity Titration


    Procedure, Non-solvent Titration Procedure, CIMCHEK™ Test Strip, or
    Refractometer.

    TYPICAL Physical state: Liquid


    PHYSICAL AND Appearance and odor: Slightly Hazy/ Chemical
    CHEMICAL Colors available: Undyed
    PROPERTIES Solubility in water: 100% Miscible
    Weight, lb/gal, 60°F (15.6°C): 7.75
    Specific gravity, (H2O = 1): 0.9288
    Boiling point, °F (°C): NA
    Flash point,COC,°F (°C): 300 (149)
    Fire point,COC, °F (°C): 325 (163)
    Freezing point (or pour point), °F, (°C): <0 (-18)
    If frozen, thaw completely at room temperature.
    pH, concentrate: NA
    pH, 5.0% mix, typical operating conditions: 8.4
    Total chlorine/chloride, wt%, calculated: 0.0/<50 ppm
    Total sulfur, wt%, calculated: 0.27
    Silicone: No

    PACKAGING Available in 5-gallon pails, 55-gallon drums, and bulk containers.

    REFRACTOMETER FACTOR: 0.9


    Multiply the scale reading obtained on your OAK SIGNATURE® Refractometer by this factor to
    obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with
    water before testing the sample mix. Remove gross contaminants from the sample mixes before
    testing. A refractometer is only recommended for use in checking the concentration on a fresh
    charge.
    This product is to be used within six months of its manufacture date indicated by the lot number on the container label.

    SAFETY DATA SHEET


    Available at www.cimcool.com
    For additional information refer to its OSHA MSDS, website or contact your local OAK
    SIGNATURE SPECIALIST OR DISTRICT MANAGER, or you may contact OAK SIGNATURE®
    Technical Services at 1-513-458-8199

    Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any
    liability whatsoever for loss of use, or for any indirect or consequential damages. Minor
    formulation changes or normal variations in the manufacture of this product may cause
    slight variances in the data presented on this sheet.
    3000 Disney Street
    Cincinnati, Ohio 45209
    1-513-458-8199 Fax: 1-513-458-817 PC B20053 8/10/2012

    You might also like