Technical Data Sheet

Pearl Glaze Gloss

Product Description
It is an epoxy based resin, which yields a
flexible film with a very high impact
resistance and superior protection against
saltwater, acids, alkalis and other
destructive elements. It has a higher gloss
finish than other brands in the market
today and is compatible with any other
primer or solvent.

Key Features
• High gloss
• Won't peel or crack
• Easy to apply
• Good drying and curing properties
• Last twice as long as QDE
• Good flexibility and toughness
• High impact resistance
• Very good adhesion and intercoat Table 2:
adhesion on various conventional Physical properties: CURED STATE*
coatings Parameters Results
• Alkali, acid, water and saltwater resistant Opacity, 150 microns wft 85% min
Finish Gloss
Product Specifications / Typical Gloss >80
Properties / Physical Characteristics Adhesion, 7 days curing 4B-5B
Table 1: Hardness, 7 days curing H min
Physical properties: UNCURED STATE* Flexibility No crack at 180o bend
Parameters Results Impact Test, 60cm X 500 g No cracking
Color Spot Test
Part A Standard and customized color 10% NaCl No surface defects
Part B Clear Yellow
Engine oil No surface defects
Viscosity
QUV, 200 hrs No cracking, no blistering,
Part A, KU 65-70
Part B, secs 13-15 (ASTM G154 Cycle 1) no chalking,
%Solid by Weight 55-80 Theoretical Coverage @50 µ DFT 8.97 m2/L
Specific Gravity, g/mL
Part A 1.10 - 1.40
Applications
Part B 0.880 - 0.899
It is used with maximum efficiency in
Fineness of Grind (FOG), NS 7
storage tanks, cars, bridges. ships,
Potlife @29ºC 3-4 hrs
industrial equipment and other objects
Drying Time
requiring a protective coating that is tough
Set-to-touch 1-2 hrs
and chemically resistant.
Tack-free 2-5 hrs
Dry-through 2-3 days
Application Procedure
Surface Preparation. Surface must be
dry, clean, and free from grease and oils,
rust, loose particles and other
contaminants in order to ensure a good
 Technical Data Sheet

2 of 2

adhesion of the paint. Sand into a smooth in air and avoid vapor concentrations higher than
surface. The cleaned surface must be the occupational exposure limits. Avoid inhalation
primed before applying or topcoating with of vapour, dust and spray mist. Avoid contact with
Pioneer Pearl Glaze Gloss White. To skin and eyes. Eating, drinking and smoking
smooth surface imperfections, use Pioneer should be prohibited in area where the material is
Epoxy Adhesives. handled, stored and processed.
Method. Add one (1) part Pearl Catalyst to
three (3) parts Pearl Glaze Epoxy Top coat Avoid storage near extreme heat, ignition sources
base. Let it stand for thirty (30) minutes or open flame. Keep container tightly sealed.
before application. Prepare sufficient Store in an area with adequate ventilation.
quantity of epoxy paint catalyst
combination good for 2-3 hours use as this KEEP OUT OF REACH OF CHILDREN.
solution has limited pot life. Use an epoxy
reducer to thin down to spray viscosity. Warranty and Disclaimers
Cleaning. Clean all tools or equipment Unless an additional warranty is specifically stated on
used while coating is still in its uncured the applicable product packaging or product literature,
Pioneer warrants that each Pioneer product conforms
state. Use Pioneer Epoxy Reducer or
with the applicable Pioneer product specification at the
lacquer thinner to clean tools and spills. time of shipment, and when properly used and
maintained in accordance with Pioneer’s current
Packaging (available sizes) published Technical Data Sheet (TDS), will serve the
1L X 12 pcs purpose for which it is intended. The recommendations
4L X 4 pcs and statements in Pioneer’s TDS are based on good
building practice but are not, by any means, an
Storage exhaustive statement of all relevant information.
Keep container tightly sealed. Store in an Pioneer shall not be liable for the recommendations in
area with adequate ventilation. Avoid its TDS and the performance of the relevant Product.
storage near extreme heat, ignition Pioneer shall also not be liable for any claims, damages
or defects arising from, or in any way attributable to
sources or open flames.
poor workmanship, incorrect design or detailing, use of
the Pioneer product in unsuitable conditions, and force
Shelf Life majeure.
24 months based on manufacturing date Pioneer MAKES NO OTHER WARRANTIES,
(White) CONDITIONS OR REPRESENTATIONS, EXPRESS OR
36 months based on manufacturing date IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
(other colors) IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY IMPLIED WARRANTY OR
Health and Safety Precautions CONDITION ARISING OUT OF A COURSE OF
Read safety data sheet before use. Safety DEALING, CUSTOMER OR USAGE OF TRADE. If the
precautions must be strictly followed during Pioneer product does not conform to this warranty, then
storage, handling and use. the sole and exclusive remedy is, at Pioneer’s option,
the replacement of the Pioneer product or refund of the
Do not use this product without first taking all purchase price.
appropriate safety measures to prevent property
Limited Liability
damage and injuries. Use only in well-ventilated Except where prohibited by law, Pioneer will not be
areas. Store in cool, dry place in tightly closed liable for any loss or damage arising from the use or
receptacles. Vapors are heavier than air and may application of the Pioneer product, whether direct,
spread along floors. Vapors may form explosive indirect, special, incidental or consequential, regardless
mixtures with air. Prevent the creation of of the legal theory asserted, including warranty,
flammable or explosive concentrations of vapors contract, negligence or strict liability.
TDS Pioneer - 022019 Version