Hartzell Propeller Inc
Hartzell Propeller Inc
Hartzell Propeller Inc
NOTE 1: Record the removal of a Temporary Revision on the Record of Temporary Revisions
pages in this manual.
NOTE 2: When the manual revision has been inserted in the manual, record the information
required on the Record of Revisions pages in this manual.
NOTE 3: Pages distributed in this revision may include pages from previous revisions if they are
on the opposite side of revised pages. This is done as a convenience to those users who
wish to print a two-sided copy of the new revision.
Metal Spinner
Maintenance Manual
© 1974, 2003, 2004, 2010, 2011, 2013, 2014, 2015, 2016, 2017, 2018 -
Hartzell Propeller Inc. - All rights reserved
REVISION 12 HIGHLIGHTS
Front matter (Cover, Revision Highlights, etc.), has been revised to match this revision.
Minor language/format changes and renumbering, if applicable are marked with a revision
bar, but are not listed below.
1. Introduction
A. General
(1) This is a list of current revisions that have been issued against this manual.
Please compare to the RECORD OF REVISIONS page to make sure that all
revisions have been added to the manual.
B. Components
(1) Revision No. indicates the revisions incorporated in this manual.
(2) Issue Date is the date of the revision.
(3) Comments indicates the level of the revision.
(a) New Issue is a new manual distribution. The manual is distributed in its
entirety. All of the revision dates are the same and no change bars are
used.
(b) Reissue is a revision to an existing manual that includes major content
and/or major format changes. The manual is distributed in its entirety. All
of the revision dates are the same and no change bars are used.
(c) Major Revision is a revision to an existing manual that includes major
content or minor format changes over a large portion of the manual. The
manual is distributed in its entirety. All of the revision dates are the same,
but change bars are used to indicate the changes incorporated in the
latest revision of the manual.
(d) Minor Revision is a revision to an existing manual that includes minor
content changes to the manual. Only the revised pages of the manual are
distributed. Each page retains the date and the change bars associated
with the last revision to that page.
4 HOLE 4 HOLE, 2-PIECE SPINNER WITH DOME CAP SUF - PARTS WITH NON "C" SUFFIX SERIAL NUMBER FOR
8 HOLE 8 HOLE, 2-PIECE SPINNER WITH DOME CAP 2-PIECE SPINNER DOME UNITS, ARE NOT
INTERCHANGEABLE WITH "C" SUFFIX SERIAL NUMBER
PARTS FOR 1-PIECE SPINNER DOME UNITS
-ITEM NOT ILLUSTRATED