Ecology and Economy

Beyond the limits!

Safety

Comfortable operation

1.0- 3.5t
FB10-8 / FB15-8 / FB18-8 /
FB20-8 / FB25-8 / FB25-8LB / FB25-8V /
FB30-8 / FB30-8V / FB35-8S

Better performance for today’s truck and business environment

Steering-angle sensitive travel speed limiter (SSC) Substantially reduced operating noise
This device automatically reduces travel speed when The load handling system’s AC motor reduces operating noise
making turns if the angle of the steer wheels exceeds a at the operator’s ear by 6 dB while the forks are lifting, compared
certain amount in either direction. with conventional trucks, thus substantially increasing operator
※This is not a tip-over prevention device. comfort (the FB15 truck).

Min. turning radius of 1800 mm Load meter (optional)

The compact truck body, with a short minimum turning The load meter shows the approximate weight of the load on
radius of 1800 mm, delivers substantially improved work the forks, to help prevent an accident due to overloading.
efficiency in the narrow aisles of a warehouse. ※The load weight shown on the meter should only be used as a guide.

Traveling and load handling interlock system

The traveling and load handling interlock system is a safety
Min. turning radius device that makes it impossible to operate the lift truck unless the
1800 mm operator is seated correctly in the operator’s seat. This system
(the FB10 and FB15 trucks) helps prevent an accident from happening if the truck operator is
not in the proper driving position or a control is moved
LCD panel with power consumption indicator unintentionally when no one is in the operator’s seat.
and hour meter screens ※When the interlock system is activated the brake is not applied.
When leaving the truck, make sure to apply the parking brake.
Multiple LCD panel screens show at a glance various kinds
of necessary and critical operating information. Fork positioning laser unit (optional)
The fork positioning laser unit helps
the operator check the fork height
and make it easy to insert the forks
into the openings in a pallet. It is well
suited for stacking and unstacking
loads in high locations and for
handling loads in a dark area.
Power consumption (center) and remaining battery time (lower) ※The laser beam is only lit when the forks are level.

Super equalizing charge

If the battery charger is set to the “super equalizing charge”
mode, an equalizing charge will be applied to the battery
every 24 hours, at the end of a regular cycle charge. This
means that the battery will be fully charged and you can use
it immediately, even after the truck has been out of service
Hour meter screen for a long period of time.
Count on TCM quality for great responses to a variety of work environments.
ELECTRIC COUNTERBALANCED FORKLIFT TRUCKS SERIES ■STANDARD DIMENSIONS ■LOAD CHART
1.0/1.5/1.8t
The TCM FB-VIII series was born as the fruit of our incessant
quest for environment-friendliness, economy, operator comfort, FB18
J P 1750
operability and safety. This new series of electric counterbalanced

CAPACITY
FB15
forklift trucks are the industry’s performance leader in a variety of H 1500
work environments.

kg) ︵
FB10
1000

D E

500
500 700 1000 1200 1400
C LOAD CENTER（mm）
2.0/2.5/3.0/3.5t
A B K
FB35
3500

CAPACITY
FB30
3000
F
FB25

︵
2500
L M N

kg)
I FB20
2000

1000
500 700 1000 1200 1400 1600
LOAD CENTER（mm）

■STANDARD SPECIFICATIONS
Manufacturer TCM
Characteristics

Model FB10-8 FB15-8 FB18-8 FB20-8 FB25-8 FB25-8LB FB25-8V FB30-8 FB30-8V FB35-8S
Load Capacity kg 1000 1500 1750 2000 2500 3000 3500
Load Center mm 500
Maximum Fork Height mm A 3000
Free Lift mm F 150 155 110 165 170
Fork Size LxWxT mm L 920 x 100 x 35 1070 x 122 x 40 1070 x 125 x 45 1070 x 150 x 50
Tilt Angle Fwd / Bwd deg D/E 6/12 6/10
Overall Length (with Forks) mm I 2875 2975 3165 3355 3460 3580 3805
Dimensions

Overall Length (without Forks) mm 1955 2055 2240 2285 2390 2510 2735
Overall Width mm J 1070 1150 1225 1380
Mast Height Fork Lowered mm B 1995 2030 2180 2030 2075 2135
Overall Height Fork Raised mm C 4030 4260
Overhead Guard Height mm K 2080 (21403)) 2125 (21853)) 2250 2100 2190 (22503)) 2100 2190 (22503))
Turning Radius (Outside) mm H 1800 (17004)) 1890 (17904)) 2070 (19504)) 2100 (19704)) 2200 (20654)) 2290 (21404)) 2500 (23604))
Fork Overhang (Centerline of front axle to front face of forks) mm M 375 435 480 500

Travel Max1) With Load km/h 14.0 13.5 14.0

Performance

(Fwd / Rvs.) Without Load km/h 16.0 15.5 15.0

Speeds
With Load mm/s 390 350 330 290 265 290 240
Lifting1)
Without Load mm/s 580 510 490 410
Weight

Total Weight (without battery) kg 2030 2050 2100 2700 3030 2960 2965 3530 4015

Front 6.00 – 9 - 10PR 6.00 – 9 – 12PR 21 x 8 – 9 – 16PR 28 x 9 – 15 – 14PR 250 – 15 – 16PR

Tires Size
Rear 16 x 6 – 8 – 10PR 18 x 7 – 8 – 14PR 18 x 7 – 8 (SE)
Wheelbase mm N 1250 1350 1400 1545 1600 1800
Chassis

Fork Spread (Outside) mm P 200 - 920 245 - 1020 250 - 1090 300 - 1090
Front mm 910 955 1000 1140
Tread
Rear mm 900 950
Under clearance at lowest point mm 90 100 90
Battery2) (STD capacity type) Voltage / Capacity (5-hour rating) V / AH 48 / 330 48 / 400 48 / 450 48 / 565 48 / 935 48 / 865 72 / 450
Electric Motors and Control

Drive motor (AC) kW / 60 min. 6.9 8.5 11.9

Electric Motors
Hydraulic motor (AC) kW / 5 min. 8.6 9.0 14.0
Drive FET inverter
Control Type Load handling FET inverter
Power steering FET chopper
NOTE: 1) Above figures are measured at "Super-mode" operation. 2) Batteries are optional equipment. 3) For European and Scandinavian export trucks
4) Figures are given for trucks with optional EPS.

Manufactured by Distributed by

TCM CORPORATION
1-15-10, Kyomachi-bori Nishi-ku,
Osaka, 550-0003, Japan
TEL: +81-6-7669-8906
FAX: +81-6-7669-8916
http://www.tcmglobal.net