PDS New
PDS New
PDS New
Application:
Buildex 12-24 Hex Head Series 500 Teks Screw is used for metal to metal fixing of thick steel purlin and hot rolled steel.
Used for metal to metal fixing in the HAVAC, plumbing and steel fabrication industries where thick steel section is in use.
A general all purpose metal to thick metal fixing product.
Features Benefits
Hex Drive For positive drive under high installation torque.
Series 500 Point For drilling into steel while ensuring maximum pullout strength and a high strip torque.
Finish Corrosion preformance of Climaseal 3 to suit the application.
Colormatch The 12-24 Series 500 Teks are painted to match Colorbond sheeting products.
Installation Instructions:
1. Use a 5/16" Hex Socket.
2. Use a mains powered or cordless screw driver with a drive speed of 3,000 RPM maximum.
3. Fit the driver bit into the screw and place at the fastening position.
4. Apply consistently firm pressure (end load) to the screw driver until the screw has fastened.
12.0 mm Max.
12.0 mm Max.
Mechanical Properties:
Single Shear Strength (Newton) 9,000 | Axial Tensile (Newton) 16,700 | Torsion Strength 13.5 Newton-metre
In the case of the 6.0mm, the 8.0mm and 12.0mm HRS the fastener failed.
All values are averages obtained under laboratory conditions and appropriate safety factors should be applied for design purposes.
These figures are applicable to BuildexA head marked product only.
Material: Carbon Steel SAE 1022 | Heat Treatment: To AS 3566.1 | Finish: Climaseal 3A
Corrosion Performance:
Climaseal 3 Fasteners are suitable for use in Category 3 corrosive environments as described in ISO 9223-2012 and
AS4312-2008
A Division of ITW Australia Pty Ltd.ACN 004 235 036 ABN 63 004 235 063 | Status WorkInProgress | Written By John Mallet | Date Written 3/05/2017 | Current Issue 7 | Current Issue Date 22/03/2019 | Page 1 of 3
Whilst every care was taken in preparation of this guide, BuildexA accepts no responsibility for the accuracy of the information supplied. Copyright 2017. The contents of this document are the
exclusive copyright of BuildexA and may not be reproduced without written permission.
www.buildex.com.au
Buildex 35005-PDS
6-351-0016-1CS 12-24 x 53 Hex Head Series 500 Teks Climaseal 3 1000 84,000
6-351-0017-9CS 12-24 x 68 Hex Head Series 500 Teks Climaseal 3 1000 72,000
6.6 Length
Max.
Effective
Length
Grip
14.7 Length
Max.
Grip Effective
Part Number Description Length Length Length
6-351-0016-1CS 12-24 x 53 Hex Head Series 500 Teks Climaseal 3 51.5 / 53.00 17.5 / 19.5 31.0 Min.
6-351-0017-9CS 12-24 x 68 Hex Head Series 500 Teks Climaseal 3 66.5 / 68.00 17.5 / 18.5 46.0 Min.
All dimensions nominal unless otherwise stated. Normal manufacturing tolerances apply. All dimensions in millimeters. Third Angle Projection.
A Division of ITW Australia Pty Ltd.ACN 004 235 036 ABN 63 004 235 063 | Status WorkInProgress | Written By John Mallet | Date Written 3/05/2017 | Current Issue 7 | Current Issue Date 22/03/2019 | Page 2 of 3
Whilst every care was taken in preparation of this guide, BuildexA accepts no responsibility for the accuracy of the information supplied. Copyright 2017. The contents of this document are the
exclusive copyright of BuildexA and may not be reproduced without written permission.
www.buildex.com.au
Buildex 35005-PDS
6-350-0016-4CS 12-24 x 53 Hex Head Series 500 Teks with Seal Climaseal 3 1000 84,000
6-350-0017-2CS 12-24 x 68 Hex Head Series 500 Teks with Seal Climaseal 3 1000 72,000
Length
Effective
Length
Grip
Length
14.7
Max.
Note
Lengths from underside of sealing washer and includes compression.
Grip Effective
Part Number Description Length Length Length
6-350-0016-4CS 12-24 x 53 Hex Head Series 500 Teks with Seal Climaseal 3 51.0 / 52.5 17.5 / 19.5 30.5 Min.
6-350-0017-2CS 12-24 x 68 Hex Head Series 500 Teks with Seal Climaseal 3 66.0 / 67.5 17.5 / 19.5 44.0 Min.
All dimensions nominal unless otherwise stated. Normal manufacturing tolerances apply. All dimensions in millimeters. BuildexA Head Office
Third Angle Projection. 600 South Road
Moorabbin Victoria 3189
Australia
www.buildex.com.au