Brazo Stick de 2,9 Mts
Brazo Stick de 2,9 Mts
Brazo Stick de 2,9 Mts
Page 1 of 3
Cerrar SIS
Pantalla anterior
Producto: EXCAVATOR
Modelo: 390D L EXCAVATOR WAG
Configuración: 390D L Excavator WAG00001-UP (MACHINE) POWERED BY C18 Engine
Especificaciones
390D Excavator Machine System Specifications
Número de medio -KENR7733-02 Fecha de publicación -01/09/2012 Fecha de actualización -05/09/2012
i04022616
S/N - KCZ1-UP
S/N - WAG1-UP
S/N - WAP1-UP
S/N - WBT1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 04-01-2022
390D L Excavator WAG00001-UP (MACHINE) POWERED BY C18 Engine(SEBP523... Page 2 of 3
Illustration 1 g02201074
Note: All the bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the bores for
the pins, the bucket, and the cylinder pin bores.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 04-01-2022
390D L Excavator WAG00001-UP (MACHINE) POWERED BY C18 Engine(SEBP523... Page 3 of 3
(8) Lubricate the sealing lip of six lip type seals lightly with the lubricant that is being sealed. Install the
dust seal so that the lip faces outside, as shown. Install six lip type seals so that the lip type seals do not
extend beyond the face of the boss.
Note: Install the following bushings in the bore so that the part number of each bushing is facing
outward.
(11) As required, use the following shims to adjust the maximum lateral clearance to 1.0 mm (0.04 inch):
Copyright 1993 - 2022 Caterpillar Inc. Tue Jan 4 10:21:53 UTC-0300 2022
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 04-01-2022