AP 800d Folleto
AP 800d Folleto
AP 800d Folleto
Rubber Tire
Asphalt Paver
Page 5
✔ New feature
2
Operator’s Station Hydrostatic Drive System ✔ Auxiliary Power Panel (Optional)
A single, sliding operator’s station can Efficient hydraulic drive system The auxiliary power panel includes
be positioned on either side of the eliminates chains and other mechanical four, 120-volt receptacles and two,
machine. The operator’s platform can linkages between the diesel engine and 240-volt receptacles that are able to
extend 305 mm (12'') beyond the side final drive components. Closed loop supply power for night-time lighting
of the machine to provide good hydrostatic propel system incorporates and other job-site work tools.
visibility. pave and travel modes to provide
versatility. Speed control system Page 7
Page 6 maintains preset paving speeds
throughout a job.
Page 4
Serviceability
Simplified service means more paving
time and less maintenance time. Large
swing open doors and panels provide
access to all service areas. Transverse
engine mounting provides ground-level
access to hydraulic pumps and the
engine cooling system. Color coded
and numbered wiring simplifies
troubleshooting of the electrical
✔ systems. The standard 500-hour oil
change interval reduces machine
downtime and increases production
time.
Page 7
3
Caterpillar® 3054C ATAAC Turbocharged Diesel Engine
Reliable and durable diesel engine for years of low maintenance operation.
4
Material Handling System
Precise mix delivery through the most advanced material handling system.
Automatic fully-proportional
feeder/auger system provides superior
material control.
5
Operator’s Station
Single operator's station designed for comfort and optimum efficiency.
6
Optional Auxiliary Power Panel
The auxiliary power panel provides efficient power for night-time lighting and other
job-site power needs.
Optional auxiliary power panel
provides 8 kW of power and includes
four 120-volt and two 240-volt
receptacles.
Serviceability
Simplified service means more paving and less maintenance time.
7
Engine Service Refill Capacities Drive System
Four-stroke cycle, four cylinder The drive utilizes a totally hydrostatic
Caterpillar 3054C ATAAC Liters Gallons propel system. Engine mounted
turbocharged, diesel engine. The engine Fuel Tank 189 50 variable displacement pumps drive two-
meets U.S. EPA Tier 2 engine Engine Oil w/filter 9 2.4 speed variable displacement wheel
emissions regulations. motors mounted directly to high torque,
Hydraulic Oil Tank 170 45
two-speed final drive. Planetary drive
Ratings at 2200 RPM kW hp Cooling System 18 5 boxes have multi-disc secondary brake.
Gross Power 97 130
Brakes Suspension
Primary braking system: Hydrostatic Four front wheels, two per side, are
transmission dynamic braking. mounted in tandem on bogie axles,
Secondary brake system: Spring equalizing ground pressure.
applied, hydraulically released
secondary brake, which is actuated by a Drive Tires (sand rib, hydroflated)
switch on the console. 16:00 x 25
Steering Tires (solid rubber)
330 mm x 559 mm (13" x 22")
8 AP-800D specifications
Operator’s Station Instrumentation Feeders and Augers
A single sliding operator’s station can Operator’s console includes: filter Variable proportional hydrostatically
be positioned on either side of machine. condition indicator light; system driven dual feeders and augers operate
The operator’s platform can extend 305 warning light for high hydraulic oil independently of forward speed. Right
mm (12") beyond machine side to temperature, low hydraulic oil level, and left side feeders operate
provide excellent visibility fore and aft low engine oil pressure, and high water independently of each other. Feeder
and to either side of the paver. temperature; battery charging light; drive and drive chains are located
Operator’s seat can also swivel beyond engine temperature gauge; fuel level outside the mainframe for easy
the side of the paver frame for better gauge; oil pressure gauge; and accessibility.
visibility. Operator’s console contains hydraulic oil temperature gauge.
full instrumentation for operation of the Feeder flights are constructed of heavy-
machine. The deluxe seat with armrests duty bushed roller chain with forged
has a heat-reflective cover. steel flight bars sliding over
replaceable, abrasion resistant drag
pans with 360-440 Brinell hardness.
Long life auger system consists of
segmented, 406 mm (16") diameter,
Operator’s Console Ventilation System cast Ni-Hard steel hemi-screw augers.
Control console with lockable vandal The ventilation system helps remove Auger and hanger bearings have built-
cover includes: steering wheel, hopper asphalt vapors from the auger chamber in steel shields for greater protection.
raise/lower switch; left and right feeder area. The system consists of a Augers are driven independently by
auto/off/man switch; horn button; hydraulically driven exhaust fan, ducts two motors. Each auger is controlled by
propel forward/reverse control lever; and exhaust stack to vent asphalt an adjustable material flow switch.
pave/travel high/low speed range vapors away from the operator and Manual override is provided. Auger
selection switches; maximum speed screed areas. The design provides good height is hydraulically adjustable
control; engine ignition switch; visibility to the augers. 171 mm (6.75").
secondary brake switch; feeder gate
control switches; screed vibrator switch
on/off; screed lift switch up/down; and
extender switches in/out.
Operator’s console and station also
Electrical System Frame
The 24-volt electrical system utilizes The H-section mainframe is constructed
includes: foot brake pedal; engine
two 12-volt batteries and a 24-volt, with a tunnel cover. The frame is
throttle high/low; auger raise/lower
55-amp alternator. The wiring is color- fabricated from heavy gauge steel plate.
switch; and hydraulic limited slip lock
coded and number impregnated for The feeder base and tunnel cover are
on/off switch. The following are
easy servicing. Electrical wiring is 12.8 mm (0.5") thick, and the side
options: generator on/off, truck hitch
protected by vinyl coated nylon plates are 15.8 mm (0.625") thick.
control in/out; front wheel assist on/off
braiding for greater durability.
switch; work lights on/off; hazard light
on/off switch; and screed
counterbalance system.
AP-800D specifications 9
Weights (approximate)
AP-800D
Tractor: with generator and auxiliary power panel 13 307 kg (29,310 lb)
with Extend-A-Mat 8-16B (diesel heat)
®
16 030 kg (35,310 lb)
with Extend-A-Mat 8-16B (electric heat system) 16 530 kg (36,410 lb)
with AS2251 (diesel heat) 16 153 kg (35,580 lb)
with AS2251 (electric heat system) 16 485 kg (36,310 lb)
*The weights of the diesel heat screeds do not include the generator and auxiliary power panel options.
Dimensions
w/8-16B Extend-A-Mat w/AS2251
A Length with push roller 6.51 m (21' 3") 6.43 m (21' 1")
with truck hitch 6.97 m (22' 10") 6.91 m (22' 8")
B Maximum operating width (tractor) 3.3 m (10' 10") 3.3 m (10' 10")
C Overall height 3.34 m (11') 3.34 m (11')
D Transport width (hopper raised) with end gates 2.72 m (8' 11") 2.72 m (8' 11")
Transport width (hopper raised) without end gates 2.44 m (8') 2.44 m (8')
E Transport height (muffler, fumes stack and seat lowered) 2.63 m (8' 8") 2.63 m (8' 8")
F Wheelbase 2.34 m (7' 8") 2.34 m (7' 8")
C
B0-80
AP 0010D
-PA
E
F
A
D B
10 AP-800D specifications
Optional Equipment
11
© 2004 Caterpillar
All Rights Reserved.
www.CAT.com