Epas 9

Department of Education
Region V
Division of Camarines Sur
QUIPAYO NATIONAL HIGH SCHOOL
San Antonio - Quipayo, Calabanga, Camarines Sur
S/Y 2022- 2023
THIRD QUARTER EXAMINATION

EPAS 9
NAME: ______________________________________________________ GRADE & SECTION: ___________________
I. MATCHING TYPE
Instruction: Match Column A to Column B . Write the letter of the correct answer on the blank.
A B
_______1. A device that connects and disconnects the flow of electric current in a circuit. A. Utility Box
_______2. A devices that hold and protect the lamp. B. Hacksaw
_______3. A rectangular shaped metallic or plastic (PVC) material in which flush type C. Screwdriver
convenience outlet and switch are attached.
_______4. An octagonal shaped electrical material where the connections or joints D. Convenience outlet
of wires are being done.
_______5. Tools used in driving or pounding and pulling out nails. E. Junction Box
_______6. An electrical materials used to hold and anchor F. Lamp Holder
electrical conduit.
_______7. Tools are made of steel hardened and tempered at the tip used to loosen G. Hammer
or tighten screws with slotted heads.
_______8. A device where the male plug of an appliance is inserted and usually fastened on the H. Switch
wall or connected in an extension cord
_______9. A circuit protective device that automatically blows and cut the current when and I. Clamp
over load or short circuit happen.
_______10. Tool is used to cut metal conduit armored cable. J. Fuse
II. MULTIPLE CHOICE

Instruction: Read the statement carefully and choose one that best illustrates an electrical tool or
material. Encircle your answer from the choices provided.
1. The blade tip is wedge-shaped and resembles a negative (-) sign. This is used to drive screws with a
single slot head.
A. Flat Screw driver C. Allen Screw Driver
B. Phillips Screw Driver D. Stubby Screw Driver
2. It is only used to cut wires and cables.

A. Long Nose Plier C. Combination Plier
B. Side cutting plier D. Wire Stripper
3. What tool that you are going to use to tighten or loosen screw?
A. hammer C. electric drill
B. pliers D. screw drivers
4. It is used by linemen to remove insulation of wire and cables in low and high voltage transmission
lines.
A. Hammer C. electrician’s knife
B. electric drill D. hacksaw
5. This tool is used to cut metal conduit and armored cable.

A. Hacksaw C. vise grip
B. screwdriver D. gear puller
6. A device that act as a convenient source of electrical energy for current consuming appliance.
A. Male plug C. Junction box
B. Switch D. Convenience outlet
7. It is also called as Lamp Sockets/Receptacles.

A. Lamp Holders C. Utility Box
B. Male Plug D. Switch
8. It is a device that connects and disconnects the flow of electric current.
A. Junction Box C. Switch
B. Utility Box D. Male Plug
9. It is a circuit protective device that automatically blows and cut the current when overload or short
circuit happens.
A. Circuit Breaker C. Lamp Holder
B. Fuse D. Junction Box
10.It is made of multiple strands joined together to make a single wire.

A. Solid Wire C. Flat Cord
B. Speaker Wire D. Stranded Wire
11. The blade tip is wedge-shaped and resembles a negative (-) sign. This is used to drive screws with a
single slot head.
A. Flat Screw driver C. Allen Screw Driver
B. Phillips Screw Driver D. Stubby Screw Driver
12. It is only used to cut wires and cables.

A. Long Nose Plier C. Combination Plier
B. Side cutting plier D. Wire Stripper
13. What tool that you are going to use to tighten or loosen screw?
A. hammer C. electric drill
B. pliers D. screw drivers
14. It is used by linemen to remove insulation of wire and cables in low and high voltage transmission
lines.
A. Hammer C. electrician’s knife
B. electric drill D. hacksaw
15. This tool is used to cut metal conduit and armored cable.
A. Hacksaw C. vise grip
B. screwdriver D. gear puller
16. A device that act as a convenient source of electrical energy for current consuming appliance.
A. Male plug C. Junction box
B. Switch D. Convenience outlet
17. It is also called as Lamp Sockets/Receptacles.

A. Lamp Holders C. Utility Box
B. Male Plug D. Switch
18. It is a device that connects and disconnects the flow of electric current.
A. Junction Box C. Switch
B. Utility Box D. Male Plug
19. It is a circuit protective device that automatically blows and cut the current when overload or short
circuit happens.
A. Circuit Breaker C. Lamp Holder
B. Fuse D. Junction Box
20.It is made of multiple strands joined together to make a single wire.

A. Solid Wire C. Flat Cord
B. Speaker Wire D. Stranded Wire
III. IDENTIFICATION
Instruction: Fill in the blanks to complete the sentence. Choose your answer from the choices given inside
the box.
__________1. A measuring tool used to measure the length of an object in centimeter and inches.
__________2. A pocket size tool used to test the line wire or circuit if there is current in it.
__________3. A tool used to measure the diameter of wires/conductors in circular mils. It can measure
small and big sizes of wires and cables.
__________4. A measuring tool used to measure the voltage, resistance and current of a circuit.
__________5. A measuring tool used in determining the size of wires/conductors. The gauge ranges
from 0 to 60 AWG (American wire gauge).
__________6. It is used to measure current flowing in a conductor. It is clamped or hanged in a
conductor
__________7. A special type of ohmmeter used to measure the electrical resistance of insulators.
__________8. An instrument used to measure electrical pressure or voltage of a circuit.
__________9. An instrument used to measure the amount of electrical current intensity in a circuit.
__________10. A measuring tool used to measure length, width and thickness of short flat object and in
sketching straight lines.

Epas 9

Uploaded by

Copyright:

Available Formats

Epas 9

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Epas 9

Uploaded by

Copyright:

Available Formats

Department of Education

THIRD QUARTER EXAMINATION

NAME: ____________________________________ GRADE & SECTION: _

II. MULTIPLE CHOICE

2. It is only used to cut wires and cables.

5. This tool is used to cut metal conduit and armored cable.

7. It is also called as Lamp Sockets/Receptacles.

10.It is made of multiple strands joined together to make a single wire.

12. It is only used to cut wires and cables.

17. It is also called as Lamp Sockets/Receptacles.

20.It is made of multiple strands joined together to make a single wire.

You might also like