AF012R02EYE
AF012R02EYE
AF012R02EYE
AF012R02 (E)
BULLETIN
affected models
October 2014
Models affected: C876, D876, C877, D877, E876, E877, F876, F877
Technical Description:
INSITE software and INLINE hardware is required to assist Yale certified Technician Level II or III
engineers to troubleshoot and repair Cummins QSB engines.
The INLINE hardware kit connects the laptop to the engine’s motor management system to enable
communication. The INSITE software on the engineer’s laptop increases the engineer’s level of
making diagnoses, trouble shooting and making adjustments where required.
To obtain the INSITE software and ensure successful installation and operation, the
following procedure should be followed carefully.
Please select the required software and hardware from the table below. The hardware is
available through the European Parts Organisation in Nijmegen.
580060658 580060295
582030485
Inline adapter Inline CANBUS
Inline kit *
580039670 cable (sig. adapter cable
Engine model (6/9 pins
IFAK plug + (60 Ω
connector +
3 pins mini-
INLINE VI)
connector) backbone)
C876 QSB 5.9 – VP30 X X X X
D876 QSB 6.7 CM850 X X
E876 QSB 6.7 CM850 X X
F876 QSB 6.7 CM850 X X
C877 QSB 5.9 – VP30 X X X X
D877 QSB 6.7 CM850 X X
E877 QSB 6.7 CM850 X X
F877 QSB 6.7 CM850 X X
*The INLINE VI kit is compatible with laptops equipped with a serial or USB port. If Inline IV is still used
and only USB port is available source locally a USB to serial adapter. Previously Cummins has
recommended to use Bafo BF-810 (USB to DB9 serial adapter). For more information contact your IT
department or visit www.bafo.com. You might also try adaptor 580049165 (USB adapter for GM LPG
engines) which we experienced working OK.
INTERCHANGEABILITY: N/A
PARTS STOCK: N/A
EFFECTIVE SERIAL NUMBER: N/A
We reserve the right to make changes in design or add improvements without incurring the obligation to make such changes in equipment
previously manufactured. The content of this publication is for information only and will not be considered for warranty reimbursement.
New INSITE order procedures:
To have the INSITE software installed on the engineer’s PC, please follow instructions for renewal
and new registration.
• Certification
1. Ensure your engineer has received the Yale Technician Level II or Yale Technician Level
III* certification for the appropriate Cummins engines.
2. Ensure your engineer’s full name and e-mail address is available for INSITE registration.
*depending on the level of certification, Cummins will decide which version will become available
• Subscription
Follow the procedure below (5 to 7) to order the Cummins INSITE subscription directly from the
Technical Publications site via www.yaledealer.eu
7. After you have received the order confirmation from Techpubs@yale.com, you will receive
an order form. Fill in the order form and send this to
emea.customerassistance@cummins.com
The INSITE registration is for a period of twelve months and includes any revision updates
Page 2 of 2 - AF012R02EYE
We reserve the right to make changes in design or add improvements without incurring the obligation to make such changes in equipment
previously manufactured. The content of this publication is for information only and will not be considered for warranty reimbursement.