Building GSR - 2023

INDEX
Chapter
Subject Item Nos. Page Nos
No
I Basic Rates of Material. 001 - 925 200-236
II Mortar 1601 - 1611 199
III Labour 1701 - 1722 197-198
IV Hire charges & Machinery 2001 - 2014 196
V Carriage. 3001 - 3434 189-195
VI Earth Work 4001 - 4033 184-188
VII Masonary work 5001 - 5050 178-183
VIII Plain Concrete work 6001 - 6027 172-177
IX Reinforced Cement concrete. 6030 - 6079 161-171
X Wood work 7001 - 7180 130-160
XI Steel & Aluminium work 8001 - 8061 117-129
XII Flooring 9001 - 9096 100-116
XIII Roofing & Ceiling 10001 - 10113 79-99
XIV Plastering & Finishing 11001 - 11121 69-78
XV Dismantling, Demolishing & Repair Work. 12001 - 12072 62-68
XVI Land Scaping & Horticulture 13001 - 13012 60-61
XVII Water Supply & Sewage. 15601 - 15772 33-59
XVIII Miscellaneous work 18001 - 18095 1-32

Basic Rate for Material
All the Basic Rates are Exclusive of G.S.T
Sr.
Description Unit Rate
No.
Precast cement concrete solid blocks of

compressive strength 70kg/cm2
a PCC (30X20X15) 100 nos 3200.00
001
b PCC (40X20X15) 100 nos 3600.00
c PCC (30X23X15) 100 nos 3600.00
d PCC (30X20X10) 100 nos 2700.00
Precast cement concrete hollow blocks of

002 a PCC (40X20X10) 100 nos 3200.00
b PCC (40X20X20) 100 nos 3900.00
c PCC (40X20X15) 100 nos 3700.00
Precast cement concrete hollow blocks of

003 a PCC (40X20X10) 100 nos 3000.00
b PCC (40X20X20) 100 nos 3700.00
c PCC (40X20X15) 100 nos 3500.00
004 Bricks class design 75 kg/cm2 (1st class wire cut) 1000 nos 9000.00
005 Bricks class design 40 kg/cm2 (1st class wire cut) 1000 nos 7000.00
Fly ash bricks
a 225X150X80MM 1000 nos 5992.00
006
b 230X110X80MM 1000 nos 5508.00
c 200X95X95MM 1000 nos 5085.00
Laterite stone
a ( 30 x 23 x 16) 100 nos 2300.00
007
b ( 30 x 30 x 16 ) 100 nos 2500.00
c ( 30 x 20 x 16 ) 100 nos 2300.00
008 Patradevi stone (35 x 30 X 16) 100 nos 4000.00
009 Patradevi stone (60 x 40 X 16) 100 nos 5300.00
010 Stone soling cu.m 1000.00
011 Garden soil cu.m 250.00
Granitic / Basaltic aggregate
a 50 mm cu.m 1150.00
b 40 mm cu.m 1212.00
012 c 32 mm cu.m 1200.00
d 20 mm cu.m 1100.00
e 12.5 mm cu.m 1300.00
f 10 mm cu.m 1100.00
013 River pebbles cu.m 1050.00
014 Laterite aggreate (60 / 50 mm) cu.m 400.00
015 Laterite aggreate (40mm & below) cu.m 1700.00
016 Cement (Ordinary Portland Cement 43 Grade) tones 6250.00
Sand (river/manufactured) cu.m 1300.00
Coarse cu.m 1300.00
017 Fine cu.m 1300.00
M. Sand (Manufactured) Confirming to IS 383 cu.m 1300.00
M. Sand (Manufactured) Confirming to IS 1542 cu.m 1300.00
018 Jungle wood (planks) cu.m 26486.00
019 Jungle wood (scantlings) cu.m 26486.00
020 Planks cu.m 26486.00
021 Scantlings cu.m 26486.00
022 Jamba wooden battens cu.m 47675.00
023 Bitumen 80/100 Packed tones 62662.00
024 Granitic / Basaltic boulders 150-200 cu.m 862.00
025 Laterite boulders 150-200 mm cu.m 400.00
026 Kerosene Litre 55.00
027 Steam coal quintal 2900.00
028 Cement (white) tones 17000.00
029 Lime quintal 1428.00
030 Mud/ Earth cu.m 250.00
031 Marble dust cu.m 1143.00
032 G.I Sheet 8' x 3' 25 SWG sq.m 484.00
033 Mild steel (SAIL, TATA. VIZAG,JSW Steel Ltd.) tones 74000.00
HYSD Reinforcement / TMT Steel reinforcement
034 tones 60000.00
from secondary producers
CRS-500 Reinforcement (SAIL, TATA. VIZAG,JSW
035 tones 77000.00
Steel Ltd. )
TMT Steel reinforcement (SAIL, TATA. VIZAG,JSW
036 tones 75000.00
Steel Ltd. )
037 Steel bars tones 64000.00
038 Cover blocks Each 3.00
039 Binding wire kgs 74.00
Non- Asbestos multi purpose fibre cement board
040 Sq. mt 170.00
6mm thick
041 Plasticizers litre 105.00
042 Polysafe - Rustonil litre 466.00
043 Precast reinforced concrete door frames Metre 258.00
044 Copper kgs 466.00
045 1st class teakwood(Scantling) cu.m 148323.00
046 1st class teakwood(Planks) cu.m 162449.00
047 2nd class teakwood(Scantling) cu.m 123602.00
048 2nd class teakwood(Planks) cu.m 134197.00
049 1st class mattiwood(Scantling) cu.m 90000.00
050 1st class mattiwood(Planks) cu.m 98882.00
051 2nd class mattiwood(Scantling) cu.m 80000.00
052 2ndclass mattiwood(Planks) cu.m 88287.00
053 Nanowood (Planks) cu.m 52972.00
054 3 mm glass sq.m 484.00
055 Superior glass sq.m 699.00
Flush door shutters (1st class teak Veneer both

faces)
056 a 38 mm sq.m 3002.00
b 35 mm sq.m 2647.00
c 30 mm sq.m 2292.00
d 25mm sq.m 1937.00
Flush door shutters ( Commercial ply both faces)
a 38 mm sq.m 2292.00
057
b 35 mm sq.m 1765.00
c 30 mm sq.m 1528.00
d 25mm sq.m 1001.00
Flush shutters ( 1 face Commercial,1 face teak

veneer)
a 38 mm sq.m 1991.00
058
b 35 mm sq.m 1765.00
c 30 mm sq.m 1528.00
d 25mm sq.m 1001.00
Flush door shutters deco type core of particle

board(1st class teak Veneer both faces)
a 38 mm sq.m 3605.00
059
b 35 mm sq.m 3250.00
c 30 mm sq.m 2894.00
d 25mm sq.m 2539.00

board ( Commercial ply both faces)
a 38 mm sq.m 2894.00
060
b 35 mm sq.m 2367.00
c 30 mm sq.m 2130.00
d 25mm sq.m 1603.00

board ( 1 face Commercial,1 face teak veneer)
a 38 mm sq.m 1937.00
061
b 35 mm sq.m 1775.00
c 30 mm sq.m 1991.00
d 25mm sq.m 1388.00
Flush door shutters Cellular core const (1st class

teak Veneer both faces)
a 38 mm sq.m 2262.00
062
b 35 mm sq.m 2098.00
c 30 mm sq.m 1937.00
d 25mm sq.m 1907.00
Flush door shutters Cellular core construction

(Commercial ply both faces)
a 38 mm sq.m 1506.00
063
b 35 mm sq.m 1829.00
c 30 mm sq.m 1722.00
d 25mm sq.m 1237.00
Flush door shutters Cellular core construction (1

face Commercial,1 face teak veneer)
064 a 38 mm sq.m 1775.00
b 35 mm sq.m 1991.00
c 30 mm sq.m 1937.00
d 25mm sq.m 1722.00
Anodized aluminium hinges
a 100 mm x 75 x 4 mm 10Nos 700.00
065 b 75 x 45 x 3.5 mm 10Nos 600.00
c 50 x45 x 3 mm 10Nos 550.00
d Coconut rafters metre 137.50
066 Frosted glass 3 mm sqm 699.00
Iron hinges
a 100x 58x1.7 mm 10Nos 250.00
067
b 75 x 47x1.5 mm 10Nos 200.00
c 50x37x1.5mm 10Nos 150.00
068 Iron screws 40 mm 100Nos 150.00
071 Nickel plated piano hinges Each 180.00
072 C.P brass screws 25 mm Each 1.25
073 4 mm thick Marine Ply sq.m 428.00
074 4mm thick Commercial Ply sq.m 264.00
075 M.S round/Square bars tone 64000.00
076 Priming coat with wood presative litre 105.00
077 Jungle wood ballies 50 mm 2.75 mtrs long. Each 100.00
080 a Jungle wood ballies150 mm 3.66 mtrs long. Each 300.00
b Jungle wood ballies 200 mm 3.66 mtrs long. Each 500.00
081 Novapan panels 12 mm sq.m 602.00
082 Novapan panels 18 mm sq.m 699.00
083 Wire guage kgs 135.00
084 4mm thick A.C sheet sq.m 178.00
085 M.S. flats tone 65000.00
086 Sintex door Each 3500.00
087 Neeru kg 16.00
088 Aluminium paint litre 240.00
089 Anti corrosive Bituminiuos paint litre 80.00
090 Black Japan paint litre 200.00
091 Synthetic enamel paint litre 230.00
092 Emulsion plastic litre 290.00
093 Flat wall paint litre 170.00
094 Ordinary ready mixed paint litre 170.00
095 Synthetic enemal paint litre 230.00
096 Transparent wood filler litre 170.00
097 Putty kg 18.00
098 Plastic roofing compound kg 50.00
099 Dry distemper kg 50.00
100 Oil bound washable distemper kg 60.00
101 Linseed oil ( raw) litre 170.00
102 Cement primer litre 135.00
103 Distemper primer litre 140.00
104 Waterproofing material(plaster) litre 28.00
105 Waterproofing compound kg 44.00
106 Marble chips (3mm&down) kg 54.00
107 Unslaked lime quintal 2200.00
108 Polysafe -Ec Primer litre 208.00
109 Polysafe -Ec 1st coat litre 481.00
110 Polysafe -Ec 2nd coat litre 566.00
111 Solvent litre 170.00
112 Steel paint exp white litre 245.00
113 Red lead(ready mixed) kg 117.00
114 White lead kg 400.00
115 Waterproofing cement paint kg 36.00
116 Red Oxide Metal primer litre 160.00
117 Wax polish kg 300.00
118 Ordinary Varnish flatting litre 260.00
119 Superior copal litre 210.00
120 Oil type (wood presavative) litre 200.00
121 Paint remover litre 235.00
122 Super snowcem kg 36.00
123 Glue kg 235.00
124 Turpentine oil litre 110.00
125 Linseed (double boiled) litre 290.00
126 Pink or white primer litre 189.00
127 Metal primer litre 177.00
128 Marble Dust kg 20.00
129 Whiting quintal 1200.00
130 Weathershield paint litre 290.00
131 Coal tar litre 173.00
132 Glass panes 3mm sq.m 484.00
133 Painting coal tar (2 coats) sq.m 35.10
134 Acryllic sheet 3 mm sq.m 914.00
M.S steel structurals(SAIL, TATA. VIZAG,JSW Steel
135 tone 77000.00
Ltd. )(R.S.Joists)
136 Flats upto 10 mm thickness tone 65000.00
137 Flats exceeding 10mm thickness tone 65000.00
M.S Tees, Angles (SAIL, TATA. VIZAG,JSW Steel Ltd.
138 tone 69000.00
)
139 M.S.Plates (SAIL, TATA. VIZAG,JSW Steel Ltd. ) tone 72000.00
140 M.S.Rivets quintal 16494.00
141 M.S.Hooks Each 17.00
142 Steel Straining Bolts quintal 21186.00
143 M.S .Rolling Shutter sq.m 1800.00
144 Top cover 24 SWG Metre 660.00
145 Spring 27.5 cm long Each 800.00
146 Ball bearings Grade 2 Each 500.00
147 Locking arrangement with handle Each 420.00
148 Chain & crank upto 16.80 Sq.m sq.m 1800.00
149 Chain & crank above 16.80 Sq.m sq.m 2000.00
M.S. steel sheets (SAIL, TATA. VIZAG,JSW Steel Ltd.
150 tone 73000.00
)
151 Alluminium kg 325.00
152 G.I pipe 50 mm dia Metre 330.00
M.S round bars upto 10 mm dia (SAIL, TATA.
153 tone 65000.00
VIZAG,JSW Steel Ltd. )
M.S round bars above 10 mm dia (SAIL, TATA.
154 tone 66000.00
VIZAG,JSW Steel Ltd. )
155 Steel frame 85 x 60 mm sq.m 1450.00
158 Fixing windows with lugs sq.m 250.00
159 Steel doors (fixed) sq.m 1700.00
160 Steel doors (single leaf) sq.m 2300.00
161 Steel doors ( double leaf) sq.m 2400.00
162 Steel windows(fixed) sq.m 1500.00
163 Brass casement window fastner Each 93.00
164 Brass peg stay Each 210.00
165 Pulley ( 38 mm ) Each 25.00
166 Pulley ( 25 mm ) Each 17.00
167 Fuse powder kg 41.00
168 Steel bolts& nuts abv 30 cm quintal 21186.00
169 Steel bolts& nuts bel 30 cm quintal 21186.00
170 Collapsable steel shutters sq.m 2400.00
171 M.S cleats Each 234.00
M.S square bars (SAIL, TATA. VIZAG,JSW Steel
172 tone 64000.00
Ltd. )
173 Steel vent(side hung) sq.m 1500.00
174 Steel vent(top hung) sq.m 1300.00
175 Steel vent(centre hung) sq.m 1400.00
176 White glazed tiles 8"x8'' sq.m 300.00
177 White glazed tiles 8"x12" sq.m 250.00
178 Colour glazed tiles 8'x12" sq.m 340.00
179 Precast terr tiles(light) sq.m 350.00
180 Precast terr tiles(dark) sq.m 368.00
181 White Makhrana marble sq.m 5380.00
182 Marble(blue or black veins) sq.m 1237.00
183 Kotah stone(20 mm) machine polished sq.m 560.00
184 Cuddhapa stone(20mm)machinepolised sq.m 377.00
185 Shahabad stone polished sq.m 409.00
186 Ceramic glazed tiles (plain)12'x12" sq.m 350.00
187 Ceramic glazed tiles (coloured 8"X8") sq.m 400.00
188 Ceramic glazed tiles(coloured 12"x12") sq.m 350.00
189 Ceramic glazed tiles(coloured 8"x12") sq.m 330.00
190 Metallic floor hardener quintal 357.00
191 High polymer modified quickset tile adhesive kg 20.00
192 Precast plain cement tacktiles sq.m 250.00
193 Vinyl flooring sq.m 620.00
194 Red agra sand stone sq.m 592.00
195 Jet black polish granite sq.m 1991.00
Kota stone 35mm thick with nosing & 3 feet and
196 sq.m 1076.00
above.
197 Ceramic glazed tiles(col 16"x16") sq.m 350.00
198 Pigment(light) kg 117.00
199 Pigment(dark) kg 109.00
200 Cheq terr tiles(light) sq.m 602.00
201 Cheq terr tiles(dark) sq.m 602.00
202 Marble chips(1-4mm) quintal 388.00
203 Marble chips(4-7 mm) quintal 465.00
204 Marble chips(7-10 mm) quintal 504.00
205 Fuse wire Each 10.00
206 Vitrified tiles(glossy)plain/ sq.m 400.00
207 Vitrified tiles(glossy)dark sq.m 500.00
208 Vitrified tiles(matt) sq.m 450.00
209 Vitrified tiles(antiskid) sq.m 438.00
210 Vitrified tiles(pavers) sq.m 650.00
211 AntiSkid tiles(light) sq.m 636.00
212 AntiSkid tiles(dark) sq.m 636.00
213 Pavers(interlock light dutyM25 sq.m 550.00
214 Pavers(interlock heavy dutyM40 sq.m 650.00
215 Pavers (interlock heavy duty) M30 grey cement sq.m 600.00
216 Pavers(interlock heavy duty)M30col cement sq.m 650.00
217 Ceramic sq.m 450.00
218 Antiskid (dark) 12 x 12 & 16 x 16 sq.m 410.00
219 Antiskid (light) 12 x 12 & 16 x 16 sq.m 375.00
220 Rustics (dark) 380 x 380 sq.m 477.00
221 Rustics (light) 380 x 380 sq.m 636.00
222 Marbonite (dark) 2 x 2 sq.m 559.00
223 Marbonite (light) 2 x 2 sq.m 500.00
224 Marbonite (dark) 3 x 3 sq.m 678.00
225 Marbonite (light) 3 x 3 sq.m 661.00
226 Scratch resistant (dark) 2 x 2 sq.m 730.00
227 Scratch resistant (light) 2 x 2 sq.m 708.00
228 Industrial Tiles (dark) 10 mm sq.m 685.00
229 Industrial Tiles (dark) 12 mm sq.m 835.00
230 Industrial Tiles (light) 10 mm sq.m 708.00
231 Industrial Tiles (light) 12 mm sq.m 930.00
232 Tactile lines sq.m 440.00
233 Tactile buttons sq.m 440.00
234 Glazed wall tiles 200 x 300 sq.m 237.00
Designer Series Floor & Wall tiles 600 x 600

236 a sq.m 770.00
(Glossy/ Matt) of Nitco/ Kajaria or Equivalent.
Premium quality Floor & Wall tiles 600 x 600

236 b sq.m 684.00
Standard quality Floor & Wall tiles 600 x 600,

236 c sq.m 593.00
237 A.C pipe 100 mm Metre 183.00

238 M.S barbed wire quintal 10800.00
239 G.I barbed wire quintal 9300.00
240 G.I staples 100Nos 194.00
241 Hollow glass blocks 20x20x10 Each 78.00
242 Pile shoe 150 mm Each 93.00
243 Pile shoe 200 mm Each 109.00
244 Brass peg rack Each 105.00
245 G.I pipe 25 mm Metre 235.00
246 G.I pipe 40 mm Metre 340.00
247 G.I elbows 40 mm Each 110.00
248 Aluminium strip edging sq.m 71.00
249 M.S plate 6mm quintal 7200.00
250 Creosote oil litre 390.00
251 Diesel litre 77.03
252 Grease kg 365.00
253 Black Japan paint litre 190.00
254 Mobil oil litre 217.00
255 Binding wire kg 74.00
256 Asbestos sheet 4 mm Metre 166.00
257 Wooden cleats Each 25.00
258 Lubricant litre 233.00
259 Bottle trap 150mm (C.P) Each 1269.00
260 Fisher union 32 mm Each 67.00
261 Fisher union 40 mm Each 92.00
262 15 mm C.P. brass pillar tap Each 633.00
263 Screws & plugs Each 83.00
264 C.P brass shower rose 100 mm Each 208.00
265 C.P brass shower rose 150 mm Each 233.00
266 Lead connection pipe 30 cm Each 59.00
267 Lead connection pipe 45 cm Each 67.00
268 Single equal plain "Y"150 x 150 x 150 Each 350.00
271 Double unequal plain invert150 x 150 x 100x 100 Each 450.00
272 Double unequal plain invert100x100x75x75 Each 450.00

273 Double equal plain invert 150 mm Each 400.00
276 Double unequal junction( plain)100x50 Each 220.00
277 Double unequal junction( plain)100x75 Each 312.00
278 Centri fugally C.I traps 100 inlet 100 mm outlet Each 515.00
281 Pipe clips 110 mm Each 20.00
282 Pipe clips 90 mm Each 13.00
283 Synthetic enamel Each 230.00
284 12.5 litres( low level)flushing cistern ceramic Each 1750.00
285 Single equal "Y"( door)150 x 150 x 150 Each 500.00
286 Single equal "Y"(door)100 x 100 x 100 Each 250.00
287 Single equal "Y"(door)75 x 75 x 75 Each 180.00
288 Brass full way valve with wheel 65 mm Each 2324.00
289 Double equal invert(door)150mm Each 729.00
290 Double equal invert(door)100 mm Each 279.00
291 Double equal invert(door) 75 mm Each 218.00
292 Double unequal junction(door)100x50 Each 240.00
293 Double unequal junction(door)100x75 Each 347.00
294 Centri (door)y C.I traps 100 inlet 100 mm outlet Each 152.00
295 Centri C.I traps(door) 100 inlet 75 mm outlet Each 202.00
297 100 mm S.W pipes Each 80.00
298 S.C.I grating Each 18.00
299 Double unequal Invt100 x 100x75 x 75(door) Each 844.00
300 Double unequal Invt100 x 100 x 75x 75(plain) Each 760.00
301 Single un equal Invt100 x 100 x 75(plain) Each 562.00
302 Single equal Invt 100 x 100 x 50 (plain) Each 374.00
303 Single equal Invt 75 x 75 x 50(plain) Each 233.00
304 S.C.I trap(nahni) 100 mm x 50 mm Each 180.00
305 White glazed tiles sq.m 300.00
306 Porcelain enameled bend Each 274.00
307 65 mm S.C.I trap Each 362.00
308 M.S holder bat clamps (32mm) Each 40.00

H.D.P.E
309 H.D.P.E. pipes 25 mm Metre 42.00
315 H.D.P.E. 200 Litres capacity water storage Tanks Each 1890.00

P.V.C Fittings
318 P.V.C connection pipe 18" Each 100.00
321 P.V.C flushing cistern 10 litres ( high level) (ARK) Each 1300.00
322 P.V.C flushing cistern 10 litres ( low level) " Each 1400.00

R.P.V.C. Fittings
323 R.P.V.C double "Y" (door) 90 mm Each 230.00
324 R.P.V.C double "Y" (door) 110 mm Each 390.00
325 R.P.V.C cowl 110 mm Each 25.00
326 R.P.V.C cowl 90 mm Each 20.00
327 R.P.V.C double "Y" ( plain) 90 mm Each 215.00
328 R.P.V.C double "Y" ( plain)110 mm Each 360.00
329 R.P.V.C nahni trap 110 mm Each 115.00
330 R.P.V.C nahni trap 90 mm Each 71.00

C.I. Fittings
331 C.I foot rests Each 750.00
C.I manhole frame & Cover(500 mm dia Wt 116
332 Each 11205.00
kg)
333 C.I rectangular frame & cover(455 x 610 wt 38 kg) Each 3736.00
334 C.I cover with frame 30 x 30 cms(Wt.10Kg) Each 984.00
335 C.I grating 100 x 100 mm Each 40.00

G.I. Pipes
336 G.I pipes 15 mm(medium) "B" Class Metre 74.00
337 G.I pipes 20 mm " Metre 89.00
343 G.I inlet connection Each 54.00
344 G.I nut Each 100.00
345 G.I chain with G.I pull Each 125.00
346 G.I Jam nut Each 65.00
347 G.I Tee( 50 mm ) Each 210.00

Brass Fittings
348 Brass stop cock 15 mm Each 340.00
354 Brass bib cock 15 mm Each 340.00
357 Brass full way valve 15 mm (ISI Mark) Each 225.00
358 Brass full way valve 20 mm " Each 325.00

Sanitary Fittings
365 Towel rail 600 x 20 mm Each 1800.00
366 Towel rail 450 x 20 mm Each 1590.00
367 Soap dish (C.P) Each 574.00
368 Toilet paper holder(C.P) Each 1010.00
369 Bath tubs ( fibre glass)(1700x740x440) Each 6198.00
370 Acrylic bath tub(1650x750x440) Each 13000.00
371 Rubber plug 40 mm Each 240.00
372 Acrylic bath tub(1520x750x440) Each 13000.00
373 Mirror 600 x 450 mm Each 1352.00
374 Glass shelf 600 x 120 mm(5mm) Each 272.00
Liquid soap container 500 ml wall mounted
375 Each 1586.00
(glass)
376 Liquid soap container 200 ml-(plastic) Each 1467.00
377 Long Pan pattern ( W.C pan) Each 2800.00
378 Indian Type ( W.C. pan ) Each 2405.00
379 European type (W.C pan ) Each 1380.00
380 White plastic seat & lid Each 1812.00
381 Black plastic seat & lid Each 1812.00
382 Flat - back single urinal Each 1997.00
383 Range of 2 urinals Each 2135.00
386 Single seater Each 2174.00
390 Flat - back wash basin(550 x 400 mm) Each 1614.00
391 Pedestal for wash basin Each 2177.00
392 Foot rests for W,C Each 675.00
393 5 litres high level P.V,C. flushing cistern Each 744.00
394 5 litres low level P.V.C flushing cistern Each 686.00
395 10 litres high level P.V,C. flushing cistern Each 895.00
396 10 litres low level P.V.C flushing cistern Each 895.00
397 5 litres C.I automatic flushing cistern Each 8747.00
400 Wash basin(white vitreous) 630 x 450 mm Each 2627.00
401 Wash basin(white vitreous ) 550 x 400 mm Each 1487.00
Kitchen sink (white vitreous )- 600 x 400 x 250
402 Each 2254.00
mm
Kitchen sink (white vitreous )- 600 x 400 x 200
403 Each 1983.00
mm
404 Telescopic Flush pipe 32 mm(G.) Each 393.00
405 Mosquito proof coupling Each 443.00
406 Angle back wash basin(600 x480 mm) Each 214.00
407 Angle back wash basin(400 x400 mm) Each 837.00
408 Heel rest bend 100mm Each 367.00
a Heel rest bend 75mm Each 315.00
409
b Heel rest bend 50mm Each 236.00
410 Flush valve Each 1305.00
411 White glazed tiles sqm 300.00
412 Spreader for urinal Each 732.00
413 Porcelain stopper Each 97.00
414 Chain with rubber plug 32 mm Each 172.00
Sand Cast
Pipes R.P.V.C Centri C.I
Iron
(a) (b) (c)
415 Pipes 100 mm Metre 1114.00 212.00 2234.00
416 Pipes 75 mm Metre 952.00 104.00 1270.00
417 Pipes 50 mm Metre 770.00 102.00 1055.00
418 Double equal Jnct100(door) Each 844.00 153.00 919.00
419 Double equal Junction 75(door) Each 608.00 119.00 662.00
420 Double equal Junction 50(door) Each 497.00 30.00 523.00
421 Double equal Jnct100(plain) Each 760.00 110.00 919.00
422 Double equal Junction 75 (plain) Each 580.00 68.00 631.00
423 Double equal Junction 50(plain) Each 402.00 30.00 508.00
424 Single equal Jnct150(door) Each 588.00 407.00 1440.00
425 Single equal Junction 100 (door) Each 562.00 161.00 611.00
426 Single equal Junction 75(door) Each 374.00 93.00 407.00
427 Single equal Jnction 100 (plain) Each 501.00 373.00 545.00
428 Single equal Junction 75 (plain) Each 347.00 153.00 377.00
429 Single equal Junction 50(plain) Each 344.00 76.00 292.00
430 Double unequal Jnct100x75(door) Each 431.00 - -
431 Double unequal Jnc100 x50 (door) Each 343.00 - -
432 Double unequal Junction 75 x 50(door) Each 245.00 - -
433 Double unequal Jnct100(plain)x 100 x 75 mm Each 441.00 55.00 -
434 Double unequal Junction 100 x50 (plain) Each 353.00 30.00 -
435 Double unequal Junction 75 x50(plain) Each 280.00 - -
436 Single unequal Junction 150 x 100(door) Each 655.00 406.00 1746.00
437 Single unequal Junction 100 x 75 (door) Each 536.00 204.00 931.00
438 Single unequal Junction 100 x50(door) Each 417.00 - 713.00
439 Single unequal Junction 150 x 100(plain) Each 616.00 379.00 1625.00
440 Single unequal Junction 100 x 75 (plain) Each 557.00 178.00 653.00
441 Single unequal Junction 100 x50(plain) Each 352.00 - 713.00
442 Single equal Invt150 (door) Each 417.00 88.00 -
443 Single equal Invt 100 (door) Each 345.00 48.00 -
444 Single equal Invt 75(door) Each 258.00 - -
445 Single equal Invt100(plain) Each 469.00 69.00 1162.00
446 Single equal Invt 75 (plain) Each 310.00 38.00 451.00
447 Single equal Invt 50(plain) Each 207.00 - 313.00
448 Bend (plain) 150mm Each 372.00 306.00 773.00
449 Bend (plain) 100mm Each 352.00 126.00 382.00
450 Bend (plain) 75 mm Each 276.00 73.00 300.00
451 Bend (Door) 100 mm Each 390.00 155.00 424.00
452 Bend (door) 75 mm Each 318.00 91.00 346.00
453 Bend (door) 50 mm Each 204.00 92.00 282.00

75 mm 150 mm
S.C.I Offset 100 mm dia
dia dia
454 75 mm Projection Each 221.00 283.00 -
455 150 mm projection Each 311.00 370.00 781.00

230 mm
100 mm dia 150 mm dia
dia
456 Stone ware pipes Metre 58.00 105.00 169.00
100 x 100 150 x 100
-
mm mm
457 S.W Gully trap Each 399.00 297.00 -
458 15 mm Metre 51.33 58.66
459 20 mm Metre 78.00 83.33
460 25 mm Metre 114.00 129.00
461 32 mm Metre 183.33 215.00
462 40 mm Metre 253.00 294.33
463 50 mm Metre 417.33 495.33

PP-R Pipes & Accessories 12 mm 20 mm 25 mm
(a) (b) (c)
464 Pipe (PN 10/SDR 11) - 3 layer Metre 75.00 142.00 200.00
465 Pipe (PN 16/SDR 7.4) - 3 layer Metre 63.00 125.00 183.00

32 mm 40 mm 50 mm
(d) (e) (f)

63 mm 75 mm 90 mm
(g) (h) (i)
110 mm 160 mm
(j) (k)
473 Pipe (PN 10/SDR 11) - 3 layer Metre 1299.00 2803.00
474 Pipe (PN 16/SDR 7.4) - 3 layer Metre 1857.00 3929.00
475 Pipe (PN 20/SDR 6) - 3 layer Metre 2200.00 4605.00
Basic rate for Material

Sr.No. Description Unit Rate
S.C.I
Rubber (P.V.C
S.C.I collar terminal
insertion door)
guard
(a) (b) ( c) (d)
476 50 mm Each 160.00 16.00 31.00 200.00
477 75 mm Each 183.00 18.00 35.00 219.00
478 100 mm Each 293.00 20.00 42.00 293.00
WATER STORAGE TANKS

R.C.C
479 225Litres capacity Each 2500.00
480 480Litres capacity Each 5300.00
481 Double equal Invt100(plain) Each 515.00
482 Double equal Invt 75 (plain) Each 399.00
483 S.C.I trap(nahni) 100 mm x 100 mm Each 288.00
484 S.C.I trap((nahni)100 x 50 mm Each 133.00
75 mm 100 mm 150 mm
A.C off sett 200 mm 300 mm
proj proj proj
(a) (b) ( c) (d) (e)
485 100 mm dia Each 47.00 59.00 28.00 35.00 35.00
486 80 mm dia Each 34.00 39.00 22.00 23.00 22.00
487 50 mm dia Each 29.00 32.00 23.00 - -
488 A.C collars 100 mm dia Each - - 10.00 - -
489 A.C collars80 mm dia Each - - 10.00 - -
490 A.C collars 50 mm dia Each - - 9.00 - -
491 A.C terminal guard 100 mm Each - - 21.00 - -
Brass ball valve 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm

(a) (b) ( c) (d) (e) (f)
494 with P.V.C floats(low) Each 125.00 160.00 210.00 535.00 616.00 0.00
495 with copper floats High) Each 1100.00 1235.00 3900.00 1000.00 1302.00 0.00
496 with plastic floats(high & low) Each 233.00 252.00 291.00 - - -
497 Brass ferrule Each 958.00 1565.00 2100.00 - - -
498 Brass non return valve Each 260.00 360.00 1000.00 1440.00 1690.00 2520.00
499 Brass non return valve 65 mm 80 mm

(a) (b)
Each 5170.00 8585.00
50 mm 75 mm 100 mm 150 mm
(a) (b) ( c) (d)
500 SC.I intercepting trap with chain & lid Each - - 421.00 475.00
501 SC.I pass over pipe Each 603.00 631.00 747.00 -
Cu
Iron
Fittings Brass C.P.Brass oxidized Aluminum
fittings
(Fe)
(a) (b) ( c) (d) (e)
502 Butt hinges 125x 70x4 mm 10Nos 3400 3650 450 515 1220
503 100 x 70 x 4 mm 10Nos 2450 2650 350 410 1020
504 75 x 40 x 2,5 mm 10Nos 1230 1310 200 265 720
505 50 x 40 x 2.5 mm 10Nos 820 880 150 215 450
506 Parliamentary hinges 150x125x27 10Nos 10000 12950 750 810 -
507 Parliamentary hinges 125x125x27 10Nos 8350 8850 600 660 -
508 Parliamentary hinges 100x125x27X5mm 10Nos 7250 7550 350 420 -
509 75x100x20x3.2 10Nos 6000 6300 250 250 -
510 Single acting spring hinges 150 Each 690 660 330 330 -
511 125 mm Each 575 625 300 300 -
512 100 mm Each 525 550 250 250 -
513 double acting spring hinges 150 Each 950 1000 450 450 -
514 125 mm Each 800 850 400 400 -
515 100 mm Each 700 750 300 300 -
Piano hinges 1mm thick 25 mm wide( nickel
516 Each 340 360 185 342 -
plated)
Piano hinges 1mm thick 35 mm wide( brass
517 Each 1650 1850 360 422 -
plated)
518 Tee Hinges 300 x 115 x 2.24 Each - - 75 85 -
519 Tee Hinges 250 x 100 x 2.25 Each - - 65 75 -
520 Rising hinges(left/right) 150 mm Each 360 360 - - -
521 125 mm Each 260 260 - - -
522 100 mm Each 220 220 196 - -
523 Sliding door bolts 300 x 16 mm Each 1502 1072 294 357 275
524 250 x 16 mm Each 1251 893 235 298 160
525 100 x 16 mm Each 500 580 175 238 90
526 Tower bolts ( barrel type) 300 x 10 Each 675 724 130 - 180
527 Tower bolts ( barrel type) 250 x 10 Each 475 500 124 188 150
528 200 x 10 mm Each 375 400 75 85 120
529 150 x 10 mm Each 285 300 51 75 90
530 100 x 10 mm Each 210 230 38 150 60
531 75 x 10 mm Each 150 165 30 55.00 45
532 Flush bolts 250 mm Each 432 458 - - -
533 150 mm Each 280 280 - - -
534 100 mm Each 215 215 - - -
535 Handles 125 mm Each 137 152 110 188 175
536 100 mm Each 102 122 95 158 110
537 75mm Each 80 95 70 132 100
538 Door latch300 x 16 x 5 mm Each 1450 1550 188 298 125
539 250 x 16 x 5 mm Each 1350 1316 195 256 105
540 100 mm mortice latch and lock Each 2100 2190 780 - -
541 100 mm rim latch and lock Each 1800 2190 950 - -
542 100 mm floor door stopper Each 325 325 95 - 90.00
543 Brass cupboard wardrobe Knob Each 242 292 225 - 75
544 Hard drawn hooks & eyes 300 mm 10Nos 1800 1950 220.00 375 -
545 250 mm 10Nos 1720 1850 190 312 -
546 200 mm 10Nos 1640 1750 150 276 -
547 150 mm 10Nos 1500.00 1600.00 126.00 248.00 64.00
548 100 mm 10Nos 1420.00 1500.00 75.00 200.00 140.00
549 Quadrant stays 300 mm Each 320 - 250 - 117.00
550 Fan light clamp 10Nos 500 - - - -
551 Chain with lock for fan light clamp 10Nos 175 - 32.00 74.00 -
552 Hasps & staples 150 mm 10Nos 1296 600 150.00 214 75
553 115 mm 10Nos 923 500 124 188 64
554 90 mm 10Nos 861 450 112 175
555 Cupboard lock (six levers) Indian make Each 380 380 200 - -
556 Ball catcher 10 mm diameter Each 30 - - - -
557 Helical spring (Indian make) Each 660 - 225 290 -
558 Cupboard Knob or wardrobe knob Each 103 175 - 42.00 35
559 Screws 50 mm 100Nos 95 356.00 166 208.00 -
560 40 mm 100Nos 90 140 35 175 -
561 35 mm 100Nos 70 216 25 166 -
562 25 mm 100Nos 50 176 20 146 83.00
563 20 mm 100Nos 45 117 83 125 -
564 Hydraulic door closer Each 1740 - 1050 1813
565 Flat latch 300 mm Each 700 750 - - 200
566 200 mm Each 520 590 - - 167
567 Kicking plate 50 cms long 100 x 3.15 mm Each - - 120 - 126
568 Curtain rod 12 mm dia 1.25 mm thick Metre 260 - 250 - 210
569 Brackets Each 180 210 176 - 176
Window stays 300 mm mortice line with 5
570 Each 175 200 90 - 217
adjustments
571 Each 150 175 80 - 200
adjustments
572 Each 125 140 70 - 170
adjustments
573 Mortice lock lever type without lock Each 1750 1840 1650 1750 382
574 Mortice lock Knob type without lock Each 965 2640 1650 1750 346
575 Ventillator 75 mm Each - - - - 360
576 Pivot hinge 62 mm Each 170 195 - - 299
577 Finger push plate 87 x 225 mm Each - 1500 - - 498
578 Finger push plate 75 x 150 mm Each - 1300 - - 462
579 M.S door latch ( a ) 300 x 20 x 6 mm Each 56.00
580 M.S door latch ( b ) 250 x 20 x 6 mm Each 38.00
CONCRESIVE 1414of BASF make or
581 equivalent, a two component, solvent less pack of 1 kg 848.00
epoxy resin based.
Acrylic bonding agent RHEOMIX 131 of BASF
582 pack of 20 kg 7311.00
make
Masterseal 300H of BASF make or equivalent
583 which is single component, high pack of 25 kg 10635.00
performance, acrylic resin based coating
MASTERSEAL SP120, a 100% solids, solvent
584 free, tough abrasion resistant protective pack of 20 kg 12765.00
coating.
Protectosil CIT of BASF make or equivalent
penetrating deeply into concrete and
providing organofunctional molecules to pack of 205
585 843815.00
inhibit the electrochemical corrosion process litres
between the rebar and the chloride ions,
oxygen and moisture.
Protectosil BHN of BASF make or equivalent
pack of 200
586 which is solvent free liquid based on a 665210.00
litres
monomeric alkylalkoxysilane.
Concressive 1315 of 'BASF' make or
equivalent which is two-component epoxy
587 injection resin, low viscosity resin system pack of 4.32kg 4061.00
having viscosity less than 350 cps at ambient
temperatures
Masterflow 400 of 'BASF' make or equivalent
588 which is rapid-curing, high flow, filler- pack of 20 kg 4415.00
extended epoxy resin grout
Masterflow 928T of BASF make or equivalent
approved which is dual shrinkage-
compensated, cementitious grout shall be
589 pack of 25 kg 1334.00
hydraulic-cement based free-flow, high
strength grout that complies with ASTM
C1107
Masterflow 935 of 'BASF' make or equivalent
which is a two-component, thixotropic, pure
590 pack of 1Litre 6338.00
epoxy resin based chemical anchoring
mortar.
EMACO S66 T of BASF make or equivalent
which is duel shrinkage-compensated,
591 cementitious micro-concrete, high strength, pack of 25 kg 1154.00
high flow, single component cementitious
formulation.
Emaco S88 CT of BASF make or equivalent
which is duel shrinkage - compensated,
592 cementitious patch repair mortar, high pack of 25 kg 1478.00
strength single component mortar modified
with fibres
Thorostructurite primer of BASF make or
equivalent which is anti-corrosion primer for
593 steel reinforcement shall be a single pack of 5 kg 681.00
component polymer- modified, cement-based
compound
Mbrace glass fiber ( Mbrace G sheet EU 900
a Sq.m 3803.00
@900 GSM(Glass Fibre Unidirectional)
Mbrace carbon fiber ( MBrace CF 240/200 -
b Unidirectional Carbon Fiber Reinforcement Sq.m 6054.00
594
System High Tensile CF) or equivalent
c Unidirectional Carbon Fiber Reinforcement Sq.m 7005.00
Mbrace carbon laminate grade 165/2500 -
595 Metre 3999.00
50x1.4
596 Coniroof 2111 system Sq.m 2534.00
Masterseal 550EL of BASF make or
equivalent elastomeric flexible, two
597 pack of 20 kg 2663.00
component polymers modified cementitious
composite system
Masterpren BG of BASF make or equivalent

which is a synthetic membrane made of
598 20 m X 2.1m 38692.00
plasticised PVC of fire resistant manufactured
by twin coloured co-extrusion method
Masterpren TPE of BASF make or equivalent

which is modified polyolefin, in two-colour
599 25m X 2.1m 58304.00
version (sand grey/black), obtained by co-
extrusion.
Sonoshield HLM 5000 of BASF make or

equivalent one-component, moisture-curing, pack of 22.50
600 12231.00
bitumen-modified polyurethane elastomeric kg
waterproofing membrane
Feovert-Krishna Conchem Products Pvt Ltd
a Litre 239.00
make or equivalent
IPNet-RB-Krishna Conchem Products Pvt Ltd
b Litre 689.00
or equivalent
EPCO-KP100-Krishna Conchem Products Pvt
601 c Litre 447.00
Ltd or equivalent
Epibond-Krishna Conchem Products Pvt Ltd
d Kg 747.00
or equivalent
Monobond-Krishna Conchem Products Pvt
e Kg 446.00
Ltd or equivalent
Supercon-100-Krishna Conchem Products
602 Kg 168.00
Pvt Ltd or equivalent
Monopol 456-Krishna Conchem Products Pvt
603 Litre 663.00
Ltd or equivalent
Monopol 456 HB-Krishna Conchem Products
604 Litre 512.00
Waterseal -Krishna Conchem Products Pvt
605 Litre 869.00
Ltd make or equivalent
Corroseal TE 321-Krishna Conchem Products
606 Litre 387.00
EPCO 2020 TX-Krishna Conchem Products
607 Litre 410.00
608 Alccofine 1109SR Kg 72.00
609 Concrete Additive Alccofine 1203 Kg 32.00
Ready mix concrete OPC
a M10 cu.m 6000.00
b M15 cu.m 6300.00
c M20 cu.m 6490.00
610
d M25 cu.m 6690.00
e M30 cu.m 7090.00
f M35 cu.m 7190.00
g M40 cu.m 7390.00
Ready mix concrete OPC/ Fly Ash
a M10 cu.m -
b M15 cu.m -
c M20 cu.m -
611
d M25 cu.m -
e M30 cu.m -
f M35 cu.m -
g M40 cu.m -
Ready mix concrete OPC & GGBS
a M10 cu.m 5650.00
612
b M15 cu.m 5950.00
c M20 cu.m 6140.00
d M25 cu.m 6340.00
e M30 cu.m 6790.00
f M35 cu.m 6890.00
g M40 cu.m 7150.00
Ready mix concrete High Performance

Concrete
a M10 cu.m 6250.00
b M15 cu.m 6550.00
613 c M20 cu.m 6740.00
d M25 cu.m 6940.00
e M30 cu.m 7340.00
f M35 cu.m 7550.00
g M40 cu.m 7750.00
614 Curing Compound AC-CURE-R or equivalent Kg. 71.00
PRECAST CEMENT CONCRETE JALI
a (50 MM ) 2 x 0.75 m Sq.m 1240.00
615
b (40 MM) 1.25 x 0.60 m Sq.m 1200.00
c ( 25 MM ) 0.50 x 0.75 m Sq.m 1000.00
616 Corrugated G I sheets (10'x 3') -26 Each 690.00
617 Corrugated G I sheets (8'x 3') -26 Each 590.00
618 Corrugated G I sheets (10'x 3')-24 G Each 844.00
619 Corrugated G I sheets (8'x 3')24 Each 702.00
620 Corrugated G I sheets (10'x 3')-22 G Each 1088.00
621 Corrugated G I sheets (8'x 3')22 Each 1059.00
622 Plain G.I sheets(8'x 4")24 - .63mm quintal 8849.00
623 Plain G.I sheets(8'x 4")22G - .80mm quintal 8849.00
624 Corrugated A.C sheet 7 mm Sq.m 756.00
625 Corrugated A.C sheet 6 mm Sq.m 462.00
626 Corrugated G I sheets -24 G Sq.m 302.00
627 Corrugated G I sheets -26G Sq.m 208.00
628 Semi corrugated sheets 6mm Thick Sq.m 164.00
629 Colour coated Galvulium sheets (TATA Make) Sq.m 555.55
630 A.C sheets 4 mm Sq.m 130.00
631 G.I bolts& nuts above 300mm Each 40.00
632 M.S flats upto 10 mm tone 65000.00
633 A.C One piece angular ridge Each 125.00
634 A.C Close fitting adj ridge Each 160.00
635 Serrated or plain adj ridge Each 155.00
636 A.C half round socketed gutter 150mm Each 359.00
637 A.C half round socketed gutter 250mm Each 388.00
638 A.C plain ended valley 100 mm Metre 398.00
639 A.C plain ended valley gutter 125 mm Metre 434.00
643 A.C angles Metre 36.00
644 Unseratted adj hip pair 184.00
645 North light adj ridge pair 190.00
646 Apron flashing piece Each 96.00
647 Eaves filler piece North light ventillater Each 76.00
648 Expansion joint sheets Each 175.00
649 Expansion joint ridges pair 90.00
650 Expansion joint for north light curves Each 60.00
651 Curved barge board Each 110.00
652 Cowl type ventillater Each 145.00
653 Ridge finals Each 70.00
654 A.C louvers S type Each 85.00
A.C drop end for plain ended eaves or

boundary wall gutter
a 300x150x225 with 75,150 Each 145.00
655 b 457x152x304 with 75,100,150 Each 164.00
c 508x152x254 with 75,100,150 outlet Each 180.00
d 900x200x300 with 75,100,150 outlet Each 185.00
e 500 x50x 250 with 75x100x150 drain Each 190.00
A.C drop end for plain ended valley wall

gutter
656 a 406.4x 127x254mm with 75,100,150 outlet Each 126.00

b 609x152x 228mm withj 75,100,150 outlet Each 188.00
c 914x203x228 with 75,100,150 outlet Each 216.00
d 457x127x152 with 75,100,150 outlet Each 116.00
a A.C stop end 150 mm Each 12.00
657 b A.C stop end 200 mm Each 32.00
c A,C stop end 300 mm Each 43.00
A.C nozzle for plain ended eaves or

boundary wall gutt
a 275 x 125 x 175 mm Each 84.00
658
b 304x152x228 Each 125.00
c 457x152 x 304 Each 132.00
d 508x152x254mm Each 156.00
A.C angles for socketed eaves or

ornamental
a 125 mm Each 36.00
659 b 150 mm Each 60.00
c 200 mm Each 118.00
d 250 mm Each 129.00
e 300 mm Each 145.00
660 Grass poolas 100 Nos 108.00
661 Bamboos Each 80.00
662 Mangalore roof tiles ( 1 st class ) 1000 Nos 19200.00
663 Mangalore roof tiles ( 2 nd class ) 1000 Nos 16800.00
664 Ridge tiles(Mangalore) Each 60.00
665 Ceiling tiles 0.6 x0.6 m Each 223.00
666 Design board 4 mm sq.m 140.00
667 Natural colour insulating board 12 mm sq.m 432.00
668 Natural colour insulating board 18 mm sq.m 504.00
669 White faced insulating board 12 mm sq.m 372.00
670 White faced insulating board 18 mm sq.m 466.00
671 Plain particle board( ceiling tiles) sq.m 168.00
672 Half random perforated board sq.m 196.00
673 Full random perforated board sq.m 223.00
674 Flame retardent board sq.m 232.00
675 Rabbit wire mesh Kg 100.00
676 Plaster of Paris Kg 12.00
677 Hessian sq.m 41.00
678 A.C plain ended valley gutter 609 x 152x22,8 Per joint 528.00
679 Jointing with spun yarn soaked in bitumen Each 16.00
680 A.C bend with door 50 mm Each 16.00
683 Junction without door (single) Each 46.00
684 Commercial ply Each 190.00
685 75 mm Offset proj 50 mm Each 35.00
686 75 mm Offset proj80 mm Each 41.00
687 75 mm Offset proj 100 mm Each 56.00
688 A.C single junction 50 mm without door Each 16.00
689 A.C single junction 50 mm with door Each 16.00
694 A.C roof lights Each 717.00
695 G.I seam bolts & nuts 25 x 6 mm 10 Nos 36.00
696 G.I plain sheets quintal 8136.00
697 Steel bolts & nuts above 300 mm length Kg 211.86
698 G.I plain sheets1. 6mm quintal 8849.00
699 G.I plain washers 100 nos 102.00
700 G.I washers 100 nos 102.00
701 Northlight ventilator curves Each 164.00
702 Flat iron brackets Each 50.00
703 G.I bolts & nuts 8 mm dia and 25 mm 10 nos 25.00
long,round headed with slots
704 iron bracket 50 x 3mm Each 30.00
705 boos & string Cum 145.00
706 Straining bolts Each 36.00
707 G.I bolts & nuts Kg 80.00
708 Seam bolts & nuts Kg 46.00
709 G.I limpet washer 100Nos 70.00
710 Bitumen washer 100Nos 40.00
711 J or L hooks Kg 143.00
712 Plastic roofing compound Kg 56.00
713 a String, mug or ban 24.00
b 6 mm aggregate cu.m 600.00
714 C.I rainwater pipes 75 mm Metre 540.00
717 C.I plain bend 100 mm Each 116.00
718 C.I plain bend 150 mm Each 136.00
719 C.I plain shoe 100 mm Each 150.00
720 C.I plain shoe 150 mm Each 349.00
721 C.I plain branch 100 mm (single) Each 160.00
722 C.I plain branch 150 mm (single) Each 314.00
723 C.I plain branch 100 mm (double) Each 240.00
724 C.I plain branch 150 mm (double) Each 498.00
725 C.I bat clamps 75,80 mmm Each 46.00
726 C.I bat clamps 100 mm Each 60.00
727 C.I bat clamps 150 mm Each 76.00
728 Spun yarn kg 152.00
729 C.I Offset 100 mm Each 152.00
730 Wire nails kg 80.00
731 fibre based self finished bitumen sq.m 30.00
732 G.I Plain Corrigated sheets (8x3) Each 377.00
733 G.I Plain Corrigated sheets (10x3) Each -
FINOLEX PVC Corrugated sheet
a 1.0mm x 1.045m sq.m 326.00
b 1.3mm x 1.045m sq.m 352.00
734 c 1.5mm x 1.045m sq.m 455.00
d 1.8mm x 1.054m sq.m 612.00
e 2.0mm x 1.054m sq.m 674.00
PVC SWR PIPES AND FITTINGS FOR ROOFING
DESCRIPTION 75mm 110mm 140mm 180mm 250mm
(iv) (v) (i) (ii) (iii)
a joint bracket with 2 clamps - - 206.00 245.00 246.00
b running outlet with 2 clamps - - 285.00 365.00 323.00
c 90 deg elbow without outlet with 2 clamps - - 316.00 410.00 491.00
d 91 deg elbow with outlet with 2 clamps - - 316.00 410.00 491.00
e short stop end - - 67.00 95.00 128.00
f stop end outlet with one clamp - - 262.00 314.00 279.00
g support bracket - - 51.00 89.00 90.00
735
h single socket elbow 173.00 278.00 - - -
i clamps - - 10.00 17.00 40.00
j pipe clip 52.00 55.00 - - -
k rafter top/side brackets assembled - - 46.00 65.00 83.00
l rubber gasket - - 34.00 48.00 30.00
m rubber seals 9.00 10.00 - - -
n roof water pipes - - - - -
o half round pipes - - 208.00 254.00 230.00
p downline pipes 175.00 322.00 - - -
q downline pipes 146.00 - - - 73.00
SN Type Size Thk Unit Rate
736 Ceramic sq.m 450.00
12 x 12 &
a Antiskid-dark sq.m 410.00
737 16 x 16
b light sq.m 375.00
a Rustics-dark 380 x 380 sq.m 477.00
738
b light sq.m 636.00
739 a Marbonite-dark 2x2 sq.m 559.00
b light 2x2 sq.m 500.00
740 c dark 3x3 sq.m 678.00
d light 3x3 sq.m 661.00
a Scratch resistant-dark 2x2 sq.m 730.00
741
b light sq.m 708.00
a Industrial Tiles-dark 10 mm sq.m 685.00
b dark 12 mm sq.m 835.00
742
c light 10 mm sq.m 708.00
d light 12 mm sq.m 930.00
743 Tactile lines sq.m 440.00
744 Tactile buttons sq.m 440.00
a Glazed wall tiles-200 x 300 sq.m 237.00
745 b 300 x 450 sq.m 320.00
c 300 x 600 sq.m 400.00
746 High polymer modified quickset tile adhesive. Kg 20.00
747 M.S rollers Kg 117.00
748 Pig lead EACH 83.00
749 Single matting 1.2x1.2 Kg 101.00
750 Bitumen hot sealing compound : grade A Sq.m 56.00
751 Bitumen solution primer of approved quality litre 89.00
752 Premoulded joint filler 25 mm thick sq.m 1004.00
Stainless Steel tubular lever D-Type mortise
753 handles with round nose, Pin cylinder 60mm Each 3220.00
with one side key and other side knob.
Block board construction flush door with teak
754 wood ply veneer on Both faces 35 mm thick - sq.m 3146.00
decorative type
755 wood ply veneer on Both faces 30 mm thick - sq.m 2891.00
decorative type
756 wood ply veneer on one face 35 mm thick - sq.m 1833.00
semi-decorative type
757 wood ply veneer on one face 30 mm thick - sq.m 1833.00
semi-decorative type
Block board construction flush door with
758 commercial ply on both faces :35 mm thick - sq.m 1532.00
non-decorative type
Block board construction flush door with
759 commercial ply on both faces :30 mm thick - sq.m 1404.00
non-decorative type
760 Galvanised steel plain sheets quintal 301.00
761 PVC corner guard Metre 903.00
762 Glass mossaic tiles (20 mm x 20 mm x 4 mm ). sq.m 1250.00
763 Tile fixing chemical adhesive kg 18.00
764 Cement Polymer Grout Compound kg 68.00
765 Acid for cleaning tiles litre 31.00
Carbon Steel galvanised dash fastner (min 5
766 micron) of 10 mm dia double threaded 6.8 10 Nos 272.00
grade - a) 10 x 60mm
grade - b)10 x 80mm
grade - c) 10 x 120mm
grade - d) 10 x 140mm
grade - e) 10 x 160mm
Stainless steel (Grade-304)hollow section
771 kg 295.00
round/square tubes
772 Stainless steel bolts/square bar and plates kg 288.00
773 Stainless steel bolts/square bar and plates kg 288.00
774 Mild steel tubes hot finished welded type kg 87.00
Stainless Steel Cylindrical lock 60mm with
775 pair of knob, keys etc. with necessary screws Each 700.00
etc.
Wall Hung type (European type) mounted
776 water closet with seat & lid (Size Each 6356.00
360x535x380)
white vitreous china flat back Large lipped
777 Each 4661.00
front urinal basin (size 335x345x535mm)
Urinal Valve Auto closing system with built in
778 Each 1549.00
control cock & wall flange
779 White Vetrious China Waterless Urinal Each 12963.00
780 Cistern with fittings for Waterless Urinal Each 1441.00
White Vetrious Urinal with Sensor Flushing

781 Valve with complete Kit.(battery based Each 13559.00
infrared sensor operated - 485x310x710mm)
Stainless steel kitchen sink with drain board.

Overall Size 1040mmx510mm(41"x20"), bowl
782 Each 7510.00
size460mmx410mmx215mm(18"x 16"x 8
1/2") Glossy.
Stainless steel kitchen sink without drain

board. Overall Size 610mmx510mm(24"x20"),
783 Each 5580.00
bowl size545mmx445mmx200mm(211/2"x
17 1/2"x 8") Glossy.

board. Overallsize 610mmx460mm(24"x18")
784 bowl Each 5490.00
size560mmx410mmx215mm(22"x16"x81/2")
Glossy.
board. Overall size 535mmx460mm(21"x18"),
785 Each 4630.00
Bowl size 460x380x200mm (18'x15"x8")
Glossy
High pressure decorative Laminates
786 sqm 430.00
(glossy/matt)
787 Melamine polish - Glossy litre 360.00
788 Melamine polish - Matt litre 425.00
789 Glass wool insulation sq.m 419.00
Double action hydraulic floor spring with
790 stainless steel cover plate, door weight upto Each 7850.00
120kg/125 kg/150kg.
HEALTH FAUCET with 8mm dia 1.2m long

791 Each 1377.00
flexible tube & wall Hook
2 Way Bib Cock with single knob and wall
792 Each 1462.00
flange
793 Handrail cum crash guard Metre 1648.00

board. Overall Size 610mmx510mm(24"x20"),
794 sq.m 5580.00
bowl size545mmx445mmx200mm(211/2"x
17 1/2"x 8") Glossy.

board. Overallsize 610mmx460mm(24"x18")
795 bowl sq.m 5490.00
size560mmx410mmx215mm(22"x16"x81/2")
Glossy.
board. Overall size 535mmx460mm(21"x18"),
796 sq.m 4630.00
Bowl size 460x380x200mm (18'x15"x8")
Glossy
797 PTMT Angle Stop cock with Flange 15mm Each 477.00
798 PTMT Urinal Spreader 15MM Each 598.00
799 Water repallent chemical approved by ASI Litre 259.00
800 C.P. Bib cock long body with wall flange Each 1050.00
801 C.P. pillar cock long body with wall flange Each 1065.00
802 Stainless steel screws 40 mm 100 Nos 300.00
Stainless steel butt hinges (heavy weight)
803 10 Nos 750.00
100x60x2.5 mm
GI Metal Tile Clip in Plain Beveled edge global

804 sq.m 1357.00
white colour tiles of size 600x600 mm and
SCH - 40(Blue)/(white) - 20mm outer dia. Metre 114.00
805 SCH - 40(Blue)/(white) - 50mm outer dia. Metre 360.00

806 SCH - 80(Blue)/(white) - 50mm outer dia. Metre 491.00
807 Antiskid tape Metre 61.00
Autoclaved aerated cement (AAC) blocks - size
808 600x200x100mm/625x240x100mm/ cum 4000.00
625x250x 100mm
809 600x200x150mm/ 625x240x150mm/ cum 4000.00
625x250x150mm
810 600x200x200mm/ 625x240x200mm/ cum 4000.00
625x250x200mm
811 600x200x230mm/ 625x240x230mm/ cum 4000.00
625x250x230mm
Flamed finish Granite stone 18mm thick Jet
812 sq.m 1883.00
Black
Flamed finish Granite stone 18mm thick
813 sq.m 1291.00
Cherry Red
Flamed finish Granite stone 18mm thick Elite
814 sq.m 1291.00
Brown
Flamed finish Granite stone 18mm thick Cat
815 sq.m 1937.00
Eye
816 Jaisalmer Stone flooring sq.m 1237.00
Mirror finish Granite stone 18mm thick Jet
817 sq.m 1883.00
Black
Mirror finish Granite stone 18mm thick
818 sq.m 1291.00
Cherry Red
Mirror finish Granite stone 18mm thick Elite
819 sq.m 1291.00
Brown
Mirror finish Granite stone 18mm thick Cat
820 sq.m 1937.00
Eye
Interlocking Shot Blasted Cement Concrete
821 sq.m 735.00
paver block ( 60 mm thick, M-35) Colour
822 sq.m 685.00
paver block ( 60 mm thick, M-35 ) Grey
823 sq.m 815.00
paver block ( 80 mm thick, M-40 ) Colour
824 sq.m 765.00
paver block ( 80 mm thick, M-40 ) Grey
Chamfered edge Cement Concrete paver block
825 sq.m 685.00
(60 mm thick, M-35) Grey
826 sq.m 735.00
(60 mm thick, M-35) Red/black
827 sq.m 735.00
(60 mm thick, M-35) Yellow/ Orange/ Earth
828 sq.m 765.00
( 80 mm thick, M-40 ) Grey
829 sq.m 815.00
(80 mm thick, M-40) Red/black
830 sq.m 815.00
(80 mm thick, M-40) Yellow/ Orange/ Earth
831 Toughened glass 12 mm thickness sq.m 2518.00
832 Toughened glass 10 mm thickness sq.m 2195.00
Stainless steel D type handles with necessary
833 screws etc complete a)L 300mm/325mm x 22 Each 1128.00
to 25mm dia
834 120 gsm plastic film/sheet Sq.m 47.00
835 Co-efficeint for L.S. items (149/100) L.S. 2.00
Single Colour Foam Core FRP (Fiber
Reinforced Polymer) Door Shutter including
accessories.
836 a Shutter Thickness : a) 30mm sq.m 2472.00
b Shutter Thickness : b) 35mm sq.m 2795.00
c Shutter Thickness : c) 40mm sq.m 3122.00
Wood Finish Foam Core FRP (Fiber
837
accessories.
a Shutter Thickness : a) 30mm sq.m 3066.00
Standard Wood Core FRP (Fiber Reinforced
Polymer) Door Shutter with Single Colour
including accessories.
838
Wood Finish Wood Core FRP (Fiber
accessories.
839
FRP (Fiber Reinforced Polymer) Frames

including accessories.
a Specified Cross Section : a) 3” x 2” Metre 437.00
840
b Specified Cross Section : b) 4” x 2” Metre 630.00
c Specified Cross Section : c) 4” x 2 ½" Metre 512.00
d Specified Cross Section : d) 5” x 2 ½” Metre 670.00
FRP (Fiber Reinforced Polymer) Frames with

Wood Finish including accessories
a Specified Cross Section : a) 3” x 2” Metre 507.00
841
b Specified Cross Section : b) 4” x 2” Metre 700.00
c Specified Cross Section : c) 4” x 2 ½ ” Metre 582.00
d Specified Cross Section : d) 5” x 2 ½” Metre 700.00
842 UPVC Only Door Frame Including Accessories Metre 406.00
UPVC 20 Mm Door Shutter Including

843 sq.m 1668.00
Accessories
UPVC 32 Mm Door Shutter Including
844 sq.m 2582.00
Accessories
845 UPVC Turn windows Including Accessories sq.m 8000.00
UPVC Three Track Sliding Windows Including
846 sq.m 6112.00
Accessories
UPVC Two Track Sliding Window
847 sq.m 5251.00
(Economical) Including Accessories
UPVC Two Track Sliding Window (Heavy)
848 sq.m 6284.00
Including Accessories
849 UPVC Partition Including Accessories sq.m 4735.00
850 UPVC Porta Cabins Including Accessories sq.m 2207.00
851 UPVC False Ceiling Including Accessories sq.m 1940.00
0.5mm thick coloured galvalume trapezoidal
852 sq.m 420.00
profile sheets (JSW or Equivalent)
0.45mm thick coloured galvalume trapezoidal
853 sq.m 390.00
profile sheets (JSW or Equivalent)
Flashings -[Corners, Ridges, valleys, gable end

854 & Trims] (Girth upto 610mm) (JSW or Metre 348.00
Equivalent)
Flashings -[Corners, Ridges, valleys, gable end
855 & Trims] (Girth above 610mm) (JSW or Metre 660.00
Equivalent)
Double unequal plain junction of required

degree complete
a 75 mm x 75 x 50 x 50mm dia Each 171.00
856
b 100mm x 100mm x 50 mm x 50 mm dia Each 220.00
c 100mm x 100mm x 75 mm x 75 mm dia Each 312.00
d 150mm x 150mm x 100 mm x 100 mm dia Each 581.00
Double unequal junction of required degree
with access door insertion rubber washer 3
mm thick bolts & nuts complete
857
b 100mm x 100mm x 50 mm x 50 mm dia Each 752.00
c 100mm x 100mm x 75 mm x75 mm dia Each 1069.00
d 150mm x 150mm x 100 mm x 100 mm dia Each 1737.00
Fancy Pillar Cock with lift type operating Knob
858 & Base flang Jaguar make or equivalent. a) Each 1200.00
15mm nominal bore
Fancy BIB Cock Short Body Jaguar make or
859 Each 1000.00
equivalent. a) 15mm nominal bore
Fancy LONG BODY BIB Cock WITH WALL
860 FLANGE Jaguar make or equivalent. a) 15mm Each 1300.00
nominal bore
Fancy TWO WAY LONG BODY BIB Cock WITH
861 WALL FLANGE Jaguar make or equivalent. a) Each 1165.00
15mm nominal bore
Fancy CONCEALED STOP COCK WITH SHEET
862 Each 1292.00
FLANCE 20MM Jaguar make or equivalent.
Fancy CONCEALED STOP COCK WITH
863 SLINDING FLANGE 15MM Jaguar make or Each 1165.00
equivalent.
Fancy wall mixer with 115mm long bend pipe
864 for connection to over head shower Jaguar Each 4500.00
make or equivalent.
Fancy wall mixer with 3 IN 1 SYSTEM WITH

865 115MM long bend pipe for connection to over Each 5212.00
head shower Jaguar make or equivalent.
Fancy wall mixer NON TELEPHONIC SHOWER
866 Each 3500.00
SYSTEM Jaguar make or equivalent.
FANCY SINK MIXER WITH J SHAPE SWINGING

867 Each 2924.00
CASTED SPOUT Jaguar make or equivalent.
Fancy TELEPHONIC SHOWER 1.5M FLEXIBLE

868 TUBE WITH SWINGING WALL HOOK Jaguar Each 2000.00
make or equivalent.
Fancy BOTTLE TRAP ECONOMY TYPE 32MM
869 Each 1081.00
Jaguar make or equivalent.
Fancy WASTE COUPLING 32MM WITH
870 190MM LONG CONNECTION PIPE WALL Each 381.00
FLANCE Jaguar make or equivalent.
Single Towel Rail - Jaquar make
871 a 300mm long Each 1208.00
b 600mm long Each 1123.00
872 Soap Dish Holder - Jaquar make (ACN-1131N) Each 500.00
Soap Dispenser with Glass Bottle - Jaquar

873 Each 1144.00
make (ACN-1135N)
874 Tumbler Holder - Jaquar make (ACN-1153N) Each 1038.00
Toilet Roll Holder with Flap - Jaquar make
875 Each 1038.00
(ACN-1153N)
Coat Hook - Jaquar make
876 a CAN-1161N Each 466.00
b CAN-1191N Each 475.00
Towel Rack 600mm long with Lower Hangers
877 Each 2669.00
- Jaquar make (CAN-1181N)
Hand Shower(Health Faucet) with 8mm dia
878 1.20mt. Long Flexible Tube with Wall Hook - Each 1377.00
Jaquar make (ALD CHR-565)
Wall Hung Cistern with installation kit -
879 Each 1398.00
Jaquar make (WHC-WHT-184)
Slim Concealed Cistern with Floor mounting
880 frame - Jaquar make (CIB-WHT- Each 9364.00
31801011XFP)
Flushing Plate - Jaquar make - Controlled Plate

Square All Chrome
881
a CIS-CHR 31207219 Each 2646.00
b CIS-CHR 31181810X Each 1186.00
Metropole Flush Valves Dual 3/6 litres -
882 Each 3941.00
Jaquar make (FLV-10855Q)
Wall Hung WC with 360 X 535 X 380 Seat

Cover - Jaquar Make
883
a CNS-WHT-959NS Each 5627.00
b CNS-WHT-959NN Each 6653.00
Floor mounted WC 350 X 480 X 390 - Jaquar

make
884
a CNS-WHT-553SN Each 2873.00
b CNS-WHT-553SS Each 3212.00
Orissa Pan/ Indian Type WC Pan - Size 580 X
885 Each 1860.00
445 X 260 - Jaquar make (CNS-WHT-451)
Urinal - Size 355 X 345 X 535 - Jaquar make
886 Each 3475.00
(URS-WHT-13261)
Urinal with fixing accessories set - Size 375 X
887 Each 6610.00
315 X 620 - Jaquar make (URS-WHT-13253
Wash Basin - Under Counter Basin - Size 370 X
888 Each 1907.00
480 X 200 (CNS-WHT-701)
Wall Hung Basin with provision of Pedestal -
889
Size 400 X 550 X 200 - Jaquar make
a CNS-WHT-801 Each 2331.00
890
b Pedestal - CNS-WHT-301 Each 1504.00
Wall Hung Basin - Size 575 X 475 X 195 -
891 Each 3835.00
Jaquar make (OPS-WHT-15801)
Wall Mixer with provision for Overhead
Shower with 115mm long bend pipe - Jaquar
892 make
a Florentine (FLR-5273UPR) Each 5339.00
b Queen's (QQT-7273UPR) Each 6017.00
Wall mixer 3 in 1 system with provision of
both Hand Shower & Overhead Shower
893 complete - Jaquar make
a Florentine (FLR-5281N) Each 5453.00
b Queen's (QQT-7281) Each 6483.00
Pillar Cock - Jaquar make
894 a Florentine (FLR-5011N) Each 1483.00
Basin Mixer - Jaquar make
895 a Florentine (FLR-5167NB) Each 3390.00
b Queen's (QQT-7167B) Each 4788.00
Two way Bib Cock with Wall Flange - Jaquar

make
896
Angular Stop Cock with wall Flangue - Jaquar

make
897
Flush Cock with Wall Flangue - Jaquar make
898 a Florentine (FLR-5083NK) Each 487.00
b Queen's (QQT-7083K) Each 742.00
Sink Mixer - Jaquar make
899 a Florentine (FLR-5319NB) Each 3390.00
b Queen's (QQT-7319B) Each 4661.00
Pressmatic - Jaquar make
900 a Pillar Cock with Closing System (PRS-031) Each 1907.00
b Urinal Valve auto closing System (PRS-077) Each 1970.00
Solid PVC door frame in plain colour Rajshri
901 Plastiwood or equivalent including Metre 360.00
accessories
Solid PVC door frame in prelaminated colour

902 Rajshri Plastiwood or equivalent including Metre 424.00
accessories
Solid panel PVC door shutter (Plain) of make

903 Rajashri Plastiwood or euivalent including Sq.m 2004.00
accessories
Solid Panel PVC door shutter (Both side
904 Prelaminated) of make Rajshri Plastiwood or Sq.m 3137.00
equivalent including accessories
Solid core PVC moulded door in plain colour
905 of make Rajshri Plastiwood or equivalent Sq.m 3225.00
including accessories
Solid core PVC moulded door in prelaminated

906 colour of make Rajshri Plastiwood or Sq.m 4818.00
equivalent including accessories
PVC false ceiling grid type of make Rajshri
907 Plastiwood or equivalent including Sq.m 1106.00
accessories
PVC wall paneling of make Rajshri Plastiwood
908 Sq.m 1615.00
or equivalent including accessories
PVC insulated wall paneling of make Rajshri
909 Plastiwood or equivalent including Sq.m 2166.00
accessories
SOLID PVC WINDOW FRAME AND SHUTTER
910 of make Rajshri Plastiwood or equivalent Sq.m 5849.00
including accessories
Aluminium composite panel cladding with
3mm/ 0.25mm thick ACP sheets, alluminium
911 framework with 50 X 25 X 1.2MM thick Sq. m 3150.00
sections, silicon sealents including
accessories.
Aluminium composite panel cladding with
thick 4mm/ 0.25mm ACP sheets, alluminium
912 framework with 50 X 25 X 1.2MM thick Sq. m 3874.00
sections, silicon sealents including
accessories.
913 Resin roof tile 3 mm thick Sq. m 1116.00
914 L angle ridge 1.00m Each 512.00
FACTORY MADE PVC Flush DOOR SHUTTER
prelength both side of make Rajshri
915 Sq.m 3346.00
Plastiwood or equivalent including
accessories
916 Alccofine 1109SR Kg 55.08
917 White Cement based wall putty Kg 18.00

Fusion Bonded Epoxy Coated TMT Steel bars
918 tones 85380.00
Fe 500 Grade
PVC RUBBER MOULDED Interlocking Cement
919 Concrete paver blocks ( 60 mm thick, M-35 sq.m 550.00
grade) Colour
grade ) Grey
grade ) Colour
grade ) Grey
grade ) Grey
Shot Blasted Cement Concrete Paving
923 sq.m 685.00
Slab(400X400X40mm)
924 sq.m 1150.00
(100 mm thick, M-50) Grey
925 sq.m 1200.00
(100 mm thick, M-50) Colour
Alluminium colour coated roofing of approved

make
PUF Insulated tile roof 30mm thick of
Sq.m 1809.98
a trapezoidal design of approved make
PUF Insulated tile roof 50mm thick of
Sq.m 2027.84
b trapezoidal design of approved make
PUF Insulated Porto tiles series 50mm thick of
Sq.m 2172.62
c approved make
d Alluminium Barge Board of approved make Rmt. 680.00

926
e Alluminium Ridge of approved make Rmt. 680.00
Alluminium Corner flashing/ Gutter Valley of

f Rmt. 680.00
approved make
Alluminium 30mm Trapezhoidal End Cap of
g Rmt. 180.00
approved make
Alluminium 50mm Trapezhoidal End Cap of
h Rmt. 215.00
approved make
Alluminium Tile Profile End Cap of approved
i Rmt. 215.00
make
927 Ready mix Plaster of Approved Make Kg 9.50
928 Self Curing Plaster of ApprovedMake Kg 12.70
929 Ready mix Plaster of Approved Make Kg 11.65
930 Tile Adhesive xtra strong of Approved Make Kg 19.20
931 Tile on Tile Adhesive of Approved Make Kg 23.40
932 Waterproofing Liquid of Approved Make Litre 103.00

(Cement mix)
933 Waterproofing Liquid, Cement Coat of Litre 261.00
Approved Make
934 Brick joining mortar of Approve Make Kg 16.90
CHAPTER II
MORTARS

Sr. No. Description Units Rate
LIME MORTAR
1601 Lime mortar (1 lime putty:1 fine sand) cu.m 8790.00
1602 Lime mortar (1 lime putty: 2 Surkhi) cu.m 7019.00
CEMENT MORTAR
1603 Cement Mortar (1 Cement : 1 Fine Sand) cu.m 8733.00
1604 Cement Mortar(1Cement:2Fine Sand) cu.m 6972.00
1605 Cement Mortar (1Cement:3Fine Sand) cu.m 6094.00
1609 Mud mortar cu.m 989.00
Lime surkhi mortar 1:1:1 (1 Lime putty:1
1610 cu.m 3280.00
Surkhi:1Fine Sand)
White cement mortar 1:2 (1 White
1611 cu.m 13699.00
Cement:2Fine Sand)

Note: Sand mean river/manufacture sand
LABOUR
Sr. No Description Unit Rate
(Semi-skilled) Bandhani, Mate, Mazdoor,
1701 1 a) Per day Rs.460
Bhisti
b) (Unskilled) Chowkidar, Hedge cutter, Mali, Per day Rs.399
Mate Coolie (ord.), Sweeper, Helper,
c) Per day Rs.399
Beldar
d) Hardrock rock or stone cutting Per day Rs.515
1 Stone cutter 1st class (skilled) Per day Rs.515
Stone cutter 2nd class (semi-
2 skilled),Chiseller, Hole Driller, breaker, Per day Rs.460
Excavator

1702 2 Driver
a) For road rollers and heavy machinery Per day Rs.515
b) For truck Per day Rs.515
c) For light vehicles, jeep etc. Per day Rs.515

1703 3 Cleaner: For truck, road roller etc. Per day Rs.399

1704 4 Operator
a) Pheumatic drill hammer Per day Rs.557
b) Concrete mixer, Asphalt boiler Per day Rs.515
c) Pump attendant, Bitumen sprayer Per day Rs.460
d) Laboratory attendant, specialised machine Per day Rs.460

1705 5) Marines
a) Driver Per day Rs.515
b) Oarsman, Tandel, Sarang Per day Rs.460

1706 6 Mason
a) Stone Ornamental work (highly skilled) Per day Rs.557
b) 1st class (skilled) Per day Rs.515
2nd class brick layer, stone layer for plaster
c) Per day Rs.460
of paris work
d) Assistant Per day Rs.399

1707 7) Carpenter
a) Furniture (highly skilled) Per day Rs.557
c) 2nd class (semi-skilled) Per day Rs.460
d) Assistant Per day Rs.399

1708 8 Blacksmith:
a) 1st class (skilled) Per day Rs.515
b) 2nd class (semi-skilled) Per day Rs.460
c) Assistant Per day Rs.399

1709 9 Fitter

1710 10 Welder (Highly skilled) Per day Rs.557

1711 11 Mechanic
a) 1st class Per day Rs.515
b) 2nd class Per day Rs.460

1712 12 Painter
a) Artist painter (Highly skilled) Per day Rs.557
b) Painter (skilled) Per day Rs.515
c) 2nd class (semi-skilled) Per day Rs.460
d) White washer Per day Rs.460

1713 13 Plumber, Electrician
a) Highly skilled Per day Rs.557
c) 2nd class Per day Rs.460

1714 14 Meter reader, gauge reader Per day Rs.515

1715 15 a) Supervisor Per day Rs.557
b) Mistri Per day Rs.557
c) Typist Per day Rs.515
d) works assistant, draughtsman Per day Rs.515
e) Head Surveyor Per day Rs.460

Dozer operator / dumper/poclain
1718 16 Per day Rs.515
operator/ motor grander / crane operator

1719 17 Compressor operator Per day Rs.515

1720 18 Tin smith
a) 1st class Per day Rs.515
b) 2nd class Per day Rs.460

1721 19 Auto Electrician

1722 20 Rig Operator
Note :These rates are exclusive of contractor's profit and overheads and are inclusive
of the wages for weekly day of rest.
CHAPTER IV
Hire Charges for Plants & Machinery for Building Works
Sr.
Machine Units Rate
No.
2001 Static Roller Day 5500
2002 Excavator (3D) with Driver & Fuel Day 10000
2003 Hydraulilc rock breaker with driver & fuel Day 13000
2004 Loader Day 6000
2005 Tipper Day 4500
2006 Mixer Cu.m 3500
2007 Pump 1 Day 250
2008 Pump 2 Day 350
2009 Pumping charges Cu.m 250
2010 Vibrator Day 600
2011 Polishing machine Day 350
2012 Mechanical mixer (Hire) Cum 140
2013 Spraying machine including electricity charges Day 350
2014 Hire charges of Pump set of capacity 4000 litres/hour. Day 500
CHAPTER V
TRANSPORTATION AND CARRIAGE OF MATERIALS
(A) By tipper truck including

loading, unloading and stacking
Beyond 5 Beyond 5 Beyond 5

upto 10 upto 20 km upto 30 km
Item nos Materials Unit 1 km 2km 3km 4 km 5 km
km per per km per km
km
(A) Lime,building rubbish, manure

sludge, moorum excavated rock
3001- 8 ( i ) Lime,moorum, building rubbish Cum 108.00 131.46 154.91 178.36 201.81 23.45 23.45 23.45
3009- 16 ( ii ) Earth Cum 135.00 164.32 193.63 222.95 252.26 29.31 29.31 29.31
3017 -24 ( iii ) Manure or sludge Cum 117.40 142.89 168.38 193.87 219.36 25.49 25.49 25.49
3025 -32 (iv ) Excavated rock Cum 216.01 262.91 309.82 356.72 403.62 46.90 46.90 46.90

3033 -40 ( B ) Sand, stone metal and soling
3041 - 48 ( i ) Sand stone metal below 40 mm Cum 129.60 157.75 185.89 214.03 242.17 28.14 28.14 28.14
30-49 - 56 ( ii ) Stone metal 40 mm & above Cum 140.26 170.72 201.18 231.64 262.09 30.46 30.46 30.46
3057 - 64 ( iii ) Soling stone Cum 152.48 185.58 218.69 251.80 284.91 33.11 33.11 33.11
CARRIAGE OF MATEIALS
(B) By mechanical transport
including loading, unloading and
stacking
Beyond 5
Beyond 5 Beyond 5
upto 20
upto 10 upto 30
Item nos Materials Unit 1 km 2km 3km 4 km 5 km km per
km per km per km
km km
(A) Lime,building rubbish, manure

sludge, moorum excavated rock
3065 - 72 (i) Lime,moorum, building rubbish Cum 195.12 220.15 244.72 268.29 290.94 20.35 16.37 13.20
3073 - 80 (ii) Earth Cum 243.89 275.18 305.90 335.36 363.67 25.44 20.46 16.50
3081 - 88 (iii) Manure or sludge Cum 212.08 239.29 266.00 291.62 316.23 22.12 17.79 14.34
3089 - 96 (iv) Excavated rock Cum 390.23 440.29 489.43 536.57 581.87 40.70 32.73 26.39
(B) Sand, stone metal and soling
3097 - 04 (i) Sand stone metal below 40 mm Cum 234.14 264.17 293.66 321.94 349.12 24.42 19.64 15.84
3105 - 12 (ii) Stone metal 40 mm & above Cum 253.40 285.90 317.81 348.42 377.84 26.43 21.25 17.14
3113- 20 (iii) Soling stone Cum 275.46 310.79 345.48 378.76 410.73 28.73 23.10 18.63
1000
3121 - 28 (2) Bricks 585.35 1001.27 1062.15 1121.02 1178.03 61.04 49.10 39.59
nos
1000
3129- 36 (3) Tiles 365.84 412.77 458.84 503.04 545.50 38.15 30.69 24.74
nos
(4) Cement,stone blocks,C.I,A.C & C.C
3137- 44 pipes below 100 mm dia and other
heavy materials
Tonne 167.24 188.70 209.76 229.96 249.37 17.44 14.03 11.31
3145 - 52 (5 ) Steel Tonne 167.24 188.70 209.76 229.96 249.37 17.44 14.03 11.31
3153 - 60 (6) Timber cum 234.14 264.17 293.66 321.94 349.12 24.42 19.64 15.84
3161 - 68 (7) Tar, bitumen Tonne 260.15 293.53 326.29 357.71 387.91 27.13 21.82 17.60
3169 - 76 (8) Steam coal cum 212.85 240.16 266.96 292.68 317.38 22.20 17.85 14.40
3177 - 84 (9) Stoneware pipes
(a ) 100 mm dia 100m 243.89 275.18 305.90 335.36 363.67 25.44 20.46 16.50
3185 - 92 (b ) 150 mm dia 100m 487.79 550.36 611.79 670.72 727.34 50.87 40.91 32.99
3193 - 00 (c ) 200 mm dia 100m 867.18 978.42 1087.63 1192.38 1293.05 90.44 72.74 58.65
3221 - 28 (d ) 230 mm dia 100m 1114.95 1257.97 1398.38 1533.06 1662.49 116.27 93.52 75.41
3229 - 36 (e ) 250 mm dia 100m 1393.69 1572.46 1747.97 1916.33 2078.11 145.34 116.90 94.26
3237 - 44 (f ) 300 mm dia 100m 1773.78 2001.32 2224.69 2438.96 2644.87 184.98 148.78 119.97
(10) R.CC, P.C Hume steel C.I pipes
3245 - 52 (a ) 100 mm dia 100m 399.83 451.12 501.47 549.77 596.18 41.70 33.54 27.04
3253 - 60 (b ) 150 mm dia 100m 639.72 721.79 802.35 879.63 953.89 66.72 53.66 43.27
3261 - 68 (c ) 200 mm dia 100m 1066.21 1202.98 1337.25 1466.04 1589.81 111.19 89.43 72.11
3269 - 76 (d ) 250 mm dia 100m 1453.92 1640.43 1823.52 1999.15 2167.92 151.63 98.33 98.33
3277 - 84 (e ) 300 mm dia 100m 1881.54 2122.90 2359.85 2587.14 2805.55 196.22 127.26 127.26
3285 - 92 (f ) 350 mm dia 100m 2665.52 3007.45 3343.12 3665.11 3974.53 277.98 180.28 180.28
3293 - 00 (g) 400 mm dia 100m 3554.02 4009.93 4457.49 4886.81 5299.37 370.64 240.37 240.37
3301 - 08 (h) 450 ,500 mm dia 100m 4569.46 5155.62 5731.06 6283.05 6813.47 476.54 309.05 309.05
3309 - 16 (i ) 600,700,750,800 mm dia 100m 6397.24 7217.87 8023.49 8796.26 9538.86 667.15 432.67 432.67
(k) 900, 1000, 1100 & 1 10029.3 10995.3 11923.5
3317 - 24 100m 7996.55 9022.34 833.94 540.84 540.84
1200mm dia 6 3 8
15993.1 18044.6 20058.7 21990.6 23847.1
3325 - 32 (l)1400,1600,1800 mm dia 100m 1667.88 1081.67 1081.67
1 8 2 6 5

1000
3333 - 40 (11) Empty cement bags 5.85 6.60 7.34 8.05 8.73 0.61 0.49 0.40
nos

100
3341 - 48 (12) Hollow glass block 5.57 6.29 6.99 7.67 8.31 0.58 0.47 0.38
nos
C) BY MANUAL LABOUR INCLUDING LOADING, UNLOADING STACKING FOR A LEAD LESS
THAN 0.5Kms.
Costof Cost for
carriage additional
including 50m or
loading part
Unit of
Item No. Materials unloadin thereof
rates
g and beyond 1st
stacking 50m upto
for first 0.5m
50 metres (Y)
Light Material
Lime, Murrum, building rubbish,
a) earth, manure or sludge and
excavated rocks
lime, moorum, earth , building
3349-50 i. 1 cu.m 101.00 22.00
materials, rubbish
3351-52 ii. Earth 1 cu.m 126.00 27.00
3353-54 iii. Manure or sludge 1cu.m 109.00 24.00
3355-56 iv. Exacavated rock cu.m 201.00 44.00
b) Sand, stone aggregate and soiling.
sand, stone agg below 40mm
3357-58 i. 1cu.m 126.00 27.00
nominal
3359-60 ii. stone aggregate 40mm & above 1cu.m 136.00 30.00
3361-62 iii. soling stone 1cu.m 148.00 32.00
3363-64 iv. bricks 1000nos 235.00 51.00
Brick tiles, Allahabad mangalore
3365-64 v. 1000nos 147.00 32.00
tiles
3367-68 vi. Steam coal 1 tonne 117.00 26.00

This rate is applicable to net quantities after deduction of prescreibed percentage

Remarks:
for voids mentioned in the specification under sub-head "Carriage of materials".
C) CARRIAGE OF MATERIALS BY MANUAL LABOUR INCLUDING LOADING, UNLOADING
STACKING FOR A LEAD LESS THAN 0.5Kms.
Costof Cost for
carriage additional
including 50m or
loading part
Unit of
Sr.no Materials unloading thereof
rates
and beyond
stacking 1st 50m
for first upto 0.5m
50 metres (Y)
Heavy Materials
Stone blocks .G.I.,C.I, pipes below
3369-72 a) 100mm dia and other heavy 1 tonne 92.00 13.00
materials
3371-72 b) cement 1 tonne 73.00 11.00
3372-74 c) Steel 1 tonne 156.00 23.00
3375-76 Timber cu.m 101.00 15.00
3377-78 Tar, bitumen, etc. 1 tonne 92.00 13.00
3379-80 S.W. pipes
3381-82 a) 100mm 100m 184.00 27.00
3383-84 b) 150mm 100m 302.00 44.00
3385-86 c) 200mm 100m 423.00 62.00
3387-88 d) 230mm 100m 541.00 79.00
3389-90 e) 250mm 100m 704.00 103.00
3391-92 f) 300mm 100m 1005.00 147.00
3393-94 g) 350mm 100m 1407.00 206.00
3395-96 h) 400mm 100m 1759.00 258.00
3397-98 i) 450mm 100m 2132.00 313.00
3399-00 j) 500mm 100m 2606.00 382.00
3401-02 k 600mm 100m 3198.00 469.00
R.C.C. pipes, steel cylinders,R.C.
pipes, C.I. pipes, Ununreinforced
pipes
3403-05 a) 100mm 100m 248.00 36.00
3405-06 b) 150mm 100m 303.00 45.00
3407-08 c) 200mm 100m 349.00 51.00
3409-10 d) 230mm 100m 524.00 77.00
3411-12 e) 250mm 100m 922.00 135.00
3413-14 f) 300mm 100m 1153.00 169.00
3415-16 g) 350mm 100m 1649.00 242.00
3417-18 h) 400mm 100m 1919.00 282.00
3419-20 i) 450mm & 500mm dia 100m 2558.00 375.00
3421-22 j) 600, 700,750 & 800 mm 100m 2814.00 413.00
C) CARRIAGE OF MATERIALS BY MANUAL LABOUR INCLUDING LOADING, UNLOADING
STACKING FOR A LEAD LESS THAN 0.5Kms.
Cost of
Cost for
carriage
additional
including
50m or part
loading
thereof
Sr.no Materials Unit of rates unloading
beyond 1st
and
50m upto
stacking
0.5m
for first 50
(Y)
metres
Asbestos Cement sheets
3423-24 a) 50mm dia 100m 42.00 6.00
3424-25 b) 80mm dia 100m 115.00 17.00
3426-27 c) 100 mm dia 100m 165.00 24.00
d
3428-29 150mm dia 100m 231.00 34.00
)
The length of SW pipes will be measured excluding of the internal depth of
Remark:
sockets.
ALL ITEM RATES ARE EXCLUSIVE OF GST BUT INCLUSIVE OF LABOUR CESS
CHAPTER VI
EARTHWORKS
Sr.No. DESCRIPTION UNIT RATE
Clearing grass and removal of rubbish upto a
4001 100 sq.m. 498.00
distance of 50 m outside the periphery of the area
Felling trees of girth(measured at a height of 1. m.

Above ground level) inluding cutting of trunks and
branches removing the roots stacking the
serviceable material and disposal of unserviceable
material for all leads :
4002 a Beyond 30 cm and upto 60 cm grith Each 498.00
b Beyond 60 cm and upto 120 cm grith Each 1153.00
c Beyond120 cm and upto 240 cm grith Each 5014.00
d Beyond 240 cm girth Each 9929.00
Surface dressing of ground including removing

vegetation in equalities not exceeding 15 cm deep

and disposal of rubbish lead upto 50 m and lift upto
4003 1.5 m.
a Ordinary soil sq.m 26.00
b Hard soil sq.m 36.00
Earthwork in surface excavation not exceeding 30

cm depth(but exceeding 1.5 m width as well as 10
sq.m on plan) including disposal of excavated earth
beyond work site for all leads lift disposed earth to
4004 be leveled and neatly dressed in:
Earthwork in excavation by mechanical means

(hydraulic excavator)/manual means over areas
4005 (exceeding 30 cm in depth, 1.5 m in width as well as
10 sq.m on plan) including disposal of excavated
earth lead upto 50 m and lift upto 1.5m disposed
earth to be leveled and neatly dressed including
providing barricading, danger lighting guarding as
directed in :
a All kinds of soil cu.m 286.00
All types of Ordinary rock including all types of

b cu.m 639.00
laterite rock, blasting prohibited
c Hard rock where blasting prohibited cu.m 1145.00
Earthwork in excavation by mechanical means

(hydraulic excavator)/manual means in foundation
pipeline trenches drain (not exceeding 1.5 m in
width or 10 sq.m. on plan) including dressing of

sides and ramming of bottoms, lift upto 1.5 m
including getting out the excavated soil and disposal
of surplus excavated soil as directed within a lead
4006
of 50 m.
a All kinds of soil cu.m 291.00
All types of Ordinary rock including all types of

b cu.m 672.00
laterite rock, blasting prohibited
c Hard rock where blasting prohibited cu.m 1169.00
Earthwork in excavation over areas in saturated soil

(exceeding 0.30 m upto a depth of 0.60 m) including
4007 disposal of excavated earth lead upto 50 m and lift cu.m 752.00
upto 1.5 m disposed earth to be neatly dressed and
leveled including pumping or bailing out water
Earthwork in excavation in foundation pipeline

trenches, drain in saturated soil upto a depth of 0.60
m lift upto 1.50 m including shoring, strutting and
pumping/bailing out water stacking the excavated
soil not more than 5 m. clear from the edge the
4008 cu.m 822.00
excavation and returning the stacked soil in 0.15 m
layers when required into plinth sides of foundation
etc. consolidating each deposited layer by ramming,
watering and disposing of all surplus excavated soil
within a lead upto 20m.
Extra for earthwork excavated in saturated soil for

4009 cu.m 121.00
every 0.30 m depth or part thereof over 0.60 m
depth below water table including pumping and
bailing out water
Extra for additional depth of 1.5 m or part thereof

in:
4010 a All types of soil cu.m 38.00
b Saturated soil cu.m 62.00
c All types of laterite rocks and hard rocks cu.m 50.00
Extra for all type of laterite rock and hard rock in

4011 wet condition including pumping or bailing out cu.m 183.00
water.
Refilling the pipeline/foundation trenches plinth

sides, foundation etc. with available excavated earth
in layers not exceeding 20 cm depth consolidating
4012 cu.m 245.00
each layer ramming and watering lead upto 50 M
and all lifts and disposal of surplus earth as directed
by Engineer in Charge.
Open timbering in trenches including strutting and

shoring complete. (face area to be timbered only to
be taken)
4013 a Depth not exceeding 1.5 m sq.m 155.00
b Depth exceeding 1.5 m but not exceeding 3.0 m sq.m 181.00
c Depth exceeding 3.00 m sq.m 210.00
Extra for planking and strutting in open planks as

4014 required to be left permanently in position(face sq.m 562.00
area to be left permanently to be measured)
Closed planking in trenches including strutting and

shoring packing cavities (wherever required)

complete. (measurement to be taken only on face
area to be timbered)
4015
a Depth not exceeding 1.5 m sq.m 296.00
b For depth exceeding 1.5 m but not exceeding 3.0 m sq.m 342.00
c For depth exceeding 3.0 m sq.m 402.00

Extra for planking and strutting and packing
material for cavities (in closed timbering) if
4016 sq.m 1079.00
required to be left permanently in position.(face
area of timbering permanently left to be measured)
Supplying and filling in plinth under floors, trenches

including watering ramming consolidating,
dressing, complete.
4017
a Sand cu.m 2314.00
b Moorum cu.m 662.00
Open timbering over areas including shuttering

shoring and use and waste of racking shores,

complete(measurements to be taken on face area
timbered)
4018
a Upto depth of 1.5 m sq.m 94.00
b For depth exceeding 1.5 m but upto 3.00 m sq.m 112.00
c For depth beyond 3.00 m sq.m 124.00
Open timbering in case of shafts, wells, cesspits man

holes and like including strutting and shoring

complete (measurements to be taken of face area
timbered)
4019
Close timbering over areas including strutting

shoring packing cavities (wherever required) and
use waste of ranking shore etc. complete.
4020 a Upto depth of 1.5 m sq.m 262.00

Close timbering in case of shafts wells, cesspits,
manholes, and the like including strutting, shoring

and packing cavities(wherever required) complete.
(measurements to be taken of face area timbered)
4021
Dewatering the trenches and bailing out water

including removal of slush, mud etc. for any depth
and disposal of pumped mud, water, slush to
4022 cu.m 498.00
suitable point not forming circuit of return of
pumped water to the very trench, by employing
diesel generated pump
Earth work in rough excavation banking excavated

earth in layers not exceeding 20 cm in depth
breaking clods, watering rolling each layer with 1/2
tonne roller or wooden or steel rammers, and
rolling every third and top most layer with power
4023 roller of minimum 8 tonnes and dressing up, in
embankments for roads, flood banks, marginal
banks and guide banks or filling up ground
depressions, lead upto 50 m and lift upto 1.5 m
a All types of soil cu.m 387.00
Ploughing the existing ground to a depth from 15

cm. to 35 cm. and watering the same:
4024
4025 Banking excavated earth in layers not exceeding 20

cm in depth breaking clods, watering, rolling each
layer with 1/2 tonne roller, or wooden or steel
rammers, & rolling every 3rd & top most layer with
power roller of minimum 8 tonnes & dressing up in
embankments for roads, flood banks, marginal
banks, and guide banks, etc. lead upto 50 m. and lift
upto 1.5 m.
a Ordinary soil cu.m 255.00
b Hard soil cu.m 300.00
Deduct for not rolling with power roller minimum 8

4026 cu.m 19.00
tonnes in item No. 4025.
4027 Deduct for not watering in item Nos. 4025. cu.m 19.00
Clearing jungle including up rooting of rank

vegetation grass bush wood trees and sapling of
girth upto 30 cm. measured at a height of 1 m above
4028 ground level & removal of rubbish upto a distance of sq.m 10.00
50 mt. outside the periphery of the area cleared. (if
however, only grass is met with the area will be
measured and paid for under item 4001).
Earthwork in excavation in saturated soil upto

depth of 0.60 m including pumping or bailing out
4029 water and banking in layer for the purpose of cu.m 1179.00
making embankments or filling up ground
depressions, lead upto 20 m. and lift upto 1.5 m.
Extra rates for quantities of works executed in or

under foul position including pumping out water as
required.* METER DEPTH.(25% of the Rate of the
item. This pertains to only such. Pumping of water
as is envisaged at the time of tendering & don’t
include those that covered under contractual Meter
4030 25%
risk).The unit, namely meter depth,to be considered Depth
for payment,shall be the depth measured from the
sub soil water level up to the center of gravity of the
Qty excuted in difficult condition. the depth shall be
reckoned correct to 0.10m, 2.05 m or more shall be
taken as 0.10 m & less than 0.05 m ignored.
Stacking stone boulder (15 to 23 cm size) for

4031 cu.m 169.00
measurement
4032 Stacking stone aggregate for measurement cu.m 112.00
4033 Stacking sand for measurement cu.m 94.00

CHAPTER VII
PRECAST MASONARY WORKS
Sr. No. DESCRIPTION UNIT RATE
Pre-cast cement concrete solid block masonry of

compressive strength 70 kg / cm2 in cement

5001 mortar 1:4 (1 cement : 4 corase sand ) in
foundation and plinth size of blocks (30 x 20 x 15)
In foundation and plinth cu.m 6404.00


5002 mortar 1:4 (1 cement : 4 corase sand ) in
In foundation and plinth cu.m 5850.00

5003 cu.m 6315.00
mortar 1:4 (1 cement : 4 corase sand ) in
Pre-cast cement concrete solid blocks masonry of

5004 sq.m 817.00
mortar 1:4 (1 cement : 4 corase sand ) in partition
walls size of blocks (30 x 20 x 10)
Extra for precast concrete block masonary in all
5005 sizes in superstructure from floor one level upto cu.m 929.00
floor V level
Extra for precast concrete block masonary in all
5006 sizes in superstructure above floor V level for cu.m 936.00
every four floors or part thereof.
BRICK MASONARY WORKS
Sr.
DESCRIPTION UNIT RATE
No.
Brick work using common burnt building bricks in
cement mortar 1:3 (1 cement : 3 coarse sand)

with bricks of class designation 75 kg/ cm2 (wire
5007 cut bricks)
a In foundation and plinth. cu.m 8624.00
b In superstructure upto floor five level. cu.m 9632.00

with bricks of class designation 40 kg / cm2 (wire
5008 cut bricks)

with bricks of class designation 75 kgs/ cm2 (wire
5009 cut bricks)
5010 with bricks of class designation 40 kg/ cm2 .
5011 with bricks of class designation 75 kg/ cm2.
5012 with bricks of class designation 40 kg/ cm2.
Extra for brick work in square and rectangular
5013 cu.m 435.00
pillars
Extra for brick work in circular pillars:
With bricks of class designation 75 kg / cm2 (wire
5014 a cu.m 2627.00
cut bricks)
b With bricks of class designation 40 kg / cm2. cu.m 2313.00
Extra for brick work curved in plan upto a mean
5015
radius not exceeding 6 meters.
a With bricks of class designation 75 kg/cm2. cu.m 816.00
b With bricks of class designation 40 kg./cm2. cu.m 736.00
Extra for making tapered surface of brick masonry
5016
a With bricks of class designation 75 kg./cm2. sq.m 484.00
b With bricks of class designation 40 kg./cm2. sq.m 436.00
Half brick masonry in cement mortar 1:3 (1
cement : 3 coarse sand) with bricks of class
5017 designation 75 kg /cm2.
a In foundation and plinth. sq.m 1066.00
b Upto floor V level. sq.m 1198.00
cement : 3 coarse sand) with bricks of class
5018 designation 40 kgs / cm2.
cement : 4 coarse, sand) with bricks of class
5019 designation 75 kg/ sq. cm upto floor five level .
5020 cement :4 coarse, sand) with bricks of class
designation 40 kg/ sq. cm upto floor five level .
Extra for cutting or chamfering of bricks to
5021 sq.m 24.00
required shape masonry work.
Providing 10 cm drip course at junction of roofs

a and wall in cement mortar 1:4 (1 cement : 4 fine Metre 76.00
sand) with bricks of class designation 75 kg / cm2.
5022
Providing 10 cm drip course at junction of roofs
b and wall in cement mortar 1:4 (1 cement : 4 fine Metre 66.00
Providing 7.62 cm thick 5 cm projected string

a course in cement mortar 1:4 (1 cement : 4 fine Metre 37.00
5023
Providing 7.62 cm thick 5 cm projected string
b course in cement mortar 1:4 (1 cement : 4 fine Metre 32.00
Brick work using fly ash bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) with bricks of class

designation 40 kgs / cm2. in foundation and
plinth.
a 230 x 110 x 80 mm cu.m 7495.00
5024
1:4 (1 cement : 4 coarse sand ) with bricks of class

designation 40 kgs / cm2. in superstructure upto
floor five level.
b 230 x 110 x 80 mm cu.m 7638.00

1:5 (1 cement : 5 coarse sand) with bricks of class
designation 40 kg / cm2 in foundation and plinth.
a 230 x 110 x 80 mm cu.m 6497.00

5025
1:5 (1 cement : 5 coarse sand) with bricks of class

designation 40 kg / cm2 in superstructure upto
floor five level.
b 230 x 110 x 80 mm cu.m 7452.00
Half brick masonry usign fly ash bricks in cement
mortar 1:3 (1 cement : 3 coarse sand ) with bricks
5026 of class designation 40 kgs / cm2.
a In foundation and plinth 200 x 95 x 95 sq.m 716.00
b Above plinth upto floor V level 200 x 95 x 95 sq.m 912.00
Half brick masonry using fly ash bricks in cement
mortar 1:4 (1 cement : 4 coarse sand) with bricks
5027 of class designation 40 kg/cm2
a In foundation and plinth 200 x 95 x 95 sq.m 652.00
b Above plinth upto floor V level 200 x 95 x 95 sq.m 882.00
Extra for brickwork in super structure above floor

5028 cu.m 702.00
V level for every four floors or part thereof.
Extra for half brickwork in super structure above

5029 sq.m 80.00
floor V level for every four floors or part thereof.
LATERITE MASONARY WORKS
Sr. No DESCRIPTION UNIT RATE
Rubble packing with hard laterite stone under
floors including watering ramming and
5035 cu.m 2211.00
consolidating etc. in pipeline trenches and other
foundations complete.
Laterite masonry of dressed stones of size as
5036 cu.m 3372.00
specified laid dry in pitching riverment etc.
Random rubble masonry of laterite stone not less
5037 cu.m 2587.00
than 20 cm laid dry in pitching rivetment etc.
Laterite masonry in neatly dressed stones of size
5038 as specified in cement mortar 1: 4 (1 cement : 4 cu.m 5186.00
coarse sand) in foundation and basement.
Laterite masonry in neatly dressed stones of size
5039 as specified in cement mortar 1: 5 (1 cement : 5 cu.m 5079.00
coarse sand) in foundation and basement.
Extra for flat semi-circular or segmental arch
5040 cu.m 402.00
works .
Extra for labour in well lining cornices coping,
5041 cu.m 445.00
etc.
Exposed decorative laterite masonry using
Patradevi stone of size as specified and laid as
5042 cu.m 9708.00
directed by architect in cement mortar 1:4 (1
cement : 4 coarse sand)
Laterite masonry in neatly dressed stones for 23

5043 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 cu.m 6075.00
coarse sand in foundation upto plinth level

5044 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 cu.m 5968.00
coarse sand) in foundation upto plinth level


Extra for laterite masonry in all sizes in

5047 cu.m 929.00
superstructure from floor I level upto floor V level.
Extra for laterite masonry in all sizes in
5048 superstructure above floor V level for every 4 cu.m 936.00
floors or part thereof
Providing and laying Autoclave Aerated cement
blocks masonry (Light Weight Foam Concrete
Blocks) with 100 mm thick AAC blocks in super
structure above plinth level up to floor V level in
5049 cu.m. 8392.00
cement mortar 1:4 (1 cement : 4 coarse sand). The
rate includes providing and placing in position 2
Nos 6 mm dia M.S. bars at every third course of
masonry work.
Laterite stone masonary in neatly dressed stones
5050 as specified in Lime Mortar (1 Lime Putty : 2 cu.m. 5613.00
Surkhi) in foundation and basement.
CHAPTER VIII
PLAIN CONCRETE WORKS
SR. NO DESCRIPTION UNIT RATE
Providing and laying in position cement concrete
1:2:4 (1 cement : 2 coarse sand: 4 graded granitic
or basaltic stone aggregate 40 m nominal size)
excluding cost of centering, shuttering and
finishing :
a All works upto plinth level cu.m 6635.00
6001
In retaining walls , return walls(any thk) including
attached pilasters, columns, piers, abutments,
pillars, posts, struts, buttresses, string or lacing
b cu.m 7442.00
courses, parapets, coping bed blocks, anchor
blocks, plain window sills, fillets etc, upto floor
five level.
Providing & laying cement concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded granitic or
basaltic stone aggrt. 40 mm. nominal size)
finishing in:
6002
b cu.m 6738.00
five level.
cement : 3 coarse sand : 6 river pebbles 40mm

nominal size) excluding cost of centering,
shuttering and finishing in:
6003 In retaining walls , return walls(any thk) including
b cu.m 5988.00
five level.
cement 4 : coarse sand : 8 river pebbles

6004 aggregates 40 mm. nominal size) excluding cost of
centering, shuttering and finishing in:
b cu.m 5809.00
five level.
cement : 5 coarse sand : 10 river pebbles

aggregate 40 mm. nominal size) excluding cost of
centering, shuttering and finishing in:
6005 In retaining walls , return walls(any thk) including
b cu.m 5518.00
five level.
cement: 3 coarse sand: 6 hard laterite stone

6006 ballast aggrt. 50 mm. nominal size) excluding cost
of centering and shuttering in :
Providing and laying cement concrete 1:4:8 (1

cement: 4 coarse sand: 8 graded granitic a basaltic

stone aggregate 40 mm nominal size) excluding
cost of centering, shuttering and finishing in

6007
b cu.m 6432.00
five level.
cement : 5 coarse sand : 10 graded granitic or
6008
finishing in:
b cu.m 6128.00
five level.
Providing & laying cement concrete 1: 1.5: 3 (1
cement: 1.5 coarse sand: 3 graded granitic or
6009 basaltic stone aggrt. 20 mm. nominal size)
finishing in:
b cu.m 7970.00
five level.
cement: 2 coarse sand: 4 graded granitic or
finishing in:
6010
b cu.m 7429.00
five level.
finishing in:
6011
b cu.m 6769.00
five level.
Centering and shuttering including struttings,
6012
propping etc. and removal of formwork for :
Foundations, footings, bases for columns and
a sq.m 407.00
mass concrete.
vertical surfaces such as retaining walls , return

b walls, walls (any thk) including attached pilasters, sq.m 479.00
buttresses, plinth and string courses, fillets, etc.
Columns, Pillars ,piers,abutments, posts and strut,

c sq.m 598.00
square, rectangular, polygon in plan. etc.
basaltic stone aggregate 20 mm nominal size)
6013
excluding the cost of centering, shuttering and
finishing etc.
a Kerbs, steps and the like at or near ground level cu.m 6810.00
basaltic stone aggregate 20 mm nominal size)
6014
excluding the cost of centering, shuttering and
finishing etc.
Providing and laying upto floor five level cement
concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded
granitic or basaltic stone aggregate 20 mm
nominal size) including smooth finishing to
exposed surfaces, with cement mortar 1:3 (1
cement: 3 fine sand) including centering and
shuttering etc.
6015 String courses, copings, bedplates, anchor blocks,
b cu.m 15373.00
plain window sills and the like.
Small lintels not exceeding 1.5 m clear span,
c including coping and the like requiring form work cu.m 17067.00
to the suspended portions.
Moulding as in cornices, window sills etc.
d cu.m 16771.00
exceeding 15 cm in girth.
Moulding in cornices, window sills etc. not
e cu.m 16874.00
exceeding 15 cm girth.
Providing and laying upto floor five level pre-
cast cement concrete 1:2:4 (1 cement: 2 coarse
sand: 4 graded granitic or basaltic stone aggregate
20 mm nominal size) including hoisting and
setting in position in cement mortar 1:3
(1cement : 3 Coarse sand) including smooth
finishing the exposed surfaces, with cement
mortar 1:3 (1 cement: 3 fine sand) including
centering and shuttering etc.
6016 a Kerbs, steps and the like at or near ground level cu.m 13708.00
String courses, copings, bed plates, anchor blocks,
b cu.m 17137.00
plain window sills and the like.
Small lintels not exceeding 1.5 m clear span,
c including coping and the like requiring form work cu.m 15066.00
to suspended portions.
Moulding as in cornices, window sills etc.
d cu.m 18535.00
exceeding 15 cm in girth.
Moulding in cornices, window sills etc. not
e cu.m 18638.00
exceedings 15 cm girth.
Extra for laying concrete in or under water & or
Cum per
liquid mud including cost of pumping and bailing
6017 meter 498.00
out water and removing slush etc. complete. * Per
depth
cu.m per m depth
Extra for laying concrete in or under foul
6018 cu.m 210.00
condition
Providing & laying damp proof course 25 mm
thick with cement concrete 1:2:4 (1 cement: 2
6019 sq.m 221.00
coarse sand : 4 graded stone agg. 10 mm nominal
size).
6020 sq.m 341.00
coarse sand: 4 graded stone agg 12.5 mm nominal
size).
6021 sq.m 387.00
coarse sand: 4 graded stone agg. 20 mm nominal
size).
Extra for providing and mixing water proofing
per
material in cement concrete work in the
6022 cement 57.00
proportion recommended by the manufacturers.
bag
*Per bag of 50 kg of cement used in the mix .
Applying a coat of hot bitumen (maxphalt 80/100
or equivalent) using 1.5 kg/sq.m. on damp proof
6023 course after cleaning the surface with brushes and sq.m 177.00
finally with a piece of cloth light soaked in
bitumen.
Providing and laying plum concrete in cement

concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded
nominal size) with plums not exceeding 15% of
6024 the volume of the finished concrete of size ranging
from 150 to 300 mm (but the maximum
dimension not exceeding 1/3rd (one third) the
least dimension of member under consideration
excluding the cost of centering and shuttering:
a With granitic or basaltic stone plums in:
1 foundation and plinth cu.m 5628.00
Walls including attached buttresses pilasters,

2 string courses, independent piers, columns and cu.m 6093.00
pillasters coping and the like. upto floor five level.
b With laterite stone plum: -


Providing and laying plum concrete in cement

concrete 1:2: 4 (1 cement: 2 coarse sand: 4 graded
nominal size) with plums not exceeding 15% of
the volumne of the finished concrete of size
ranging from 150 to 300 mm (but the maximum
dimension not exceeding 1/3rd (one third) the
least dimension of member under consideration
excluding the cost of centering and shuttering:
6025
a With granitic or basaltic stone plums in :

b Lateritic stone plum in: -

Extra for concrete work in superstructure above

6026 cu.m 702.00
floor five level for each four floors or part thereof.
Making plinth protection 50mm thick of Cement

Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded
stone aggregate 20mm nominal size) over 75mm
6027 sq.m 810.00
bed of dry laterite aggregate 40mm nominal size
well rammed and consolidated and grouted with
fine sand including finishing the top smooth.
CHAPTER IX
REINFORCED CEMENT CONCRETE WORKS
Providing and laying in position (1:11/2:3)

Reinforced cement conrete excluding the cost of
centering, shuttering, finishing and reinfrocement
(1 cement: 1½ coarse sand:3 graded stone agg
20mm nominal size)
6030 In walls (any thickness), including attached
pilasters, buttresses, plinth and string courses,
b cu.m 8034.00
fillets, columns, pillars, piers, abutments, posts
and structs etc. upto floor five level
In beams, suspended floors, roofs having slope
upto 15° landings, balconies, shelves, chajjas,
c cu.m 8109.00
lintels, bands, plain window sills, staircases upto
floor five level
Providing and laying in position (1:2:4) reinforced
cement concrete excluding the cost of centering,
shuttering, finishing and reinforcement. (1
cement:2 coarse sand:4 graded stone agg 20mm
nominal size)
6031 In walls (any thickness), including attached
pilasters, buttresses, plinth and string courses,
b cu.m 7544.00
fillets, columns, pillars, piers, abutments, posts
and structs etc. upto floor five level
In beams, suspended floors, roofs having slope
upto 15° landings, balconies, shelves, chajjas,
c cu.m 7611.00
intels, bands, plain window sills, staircases upto
floor five level
Providing and laying upto floor five level
reinforced cement concrete (1:2:4) in kerbs, steps
and the like excluding the cost of centering,
6032 cu.m 7640.00
shuttering and finishing and reinforcement (1
cement: 2 coarse sand: 4 graded grantic or
basaltic aggreate 20mm nominal size
Reinforced cement concrete work in arches, arch
ribs, domes, vaults, shells, folded plate and roofs
having slope more than 15° upto floor five level
6033 excluding the cost of centering, shuttering, cu.m 7672.00
finishing and reinforcement with 1:1½ :3 (1
cement: 1½ coarse sand: 3 graded grantic or
basaltic aggreate 20mm nominal size)
Reinforced cement concrete work in arches, arch

ribs, domes, vaults, shells, folde plate and roofs
having slope more than 15° upto floor five level
6034 excluding the cost of centering, shuttering, cu.m 7182.00
finishing and reinforcement with 1:2:4 (1 cement:
2 coarse sand: 4 gradrd granitic or basaltic
aggregate 20mm nominal size
Reinforced cement concrete work in chimneys,

shafts upto floor five level excluding the cost of
6035 centering, shuttering, finishing and reinforcement cu.m 8155.00
with 1:1½ :3 (1 cement: 1½ coarse sand: 3 graded
granitic or basltic aggreate 20mm nominal size)
Reinforced cement concrete work in chimneys,

shafts upto floor five level excluding the cost of
6036 centering, shuttering, finishing and reinforcement cu.m 7664.00
with 1:2:4 (1 cement: 2 coarse sand: 4 graded
granitic or basaltic aggreate 20mm nominal size
Reinforced cement concrete work in well steining

excluding the cost of centering, shuttering,
6037 finishing and reinforcement with 1:1½ :3 (1 cu.m 7329.00
cement: 1½ coarse sand: 3 graded granitic or
basaltic aggreate 20mm nominal size
Reinforced cement concrete work in well steining
6038 finishing and reinforcement with 1:2:4 (1 cement: cu.m 6672.00
2 coarse sand: 4 graded granitic or basaltic
aggreate 20mm nominal size
Reinforced cement concrete work in vertical and

horizontal fins individually or forming box
louvers, facias and eaves boards upto floor five
6039 level excluding the cost of centering, shuttering, cu.m 7735.00
finishing and reinforcement with 1:1½ :3 (1
cement: 1:1½ coarse sand: 3 graded stone agg
20mm nominal size)
Reinforced cement concrete work in vertical and
horizontal fins individually or forming box
louvers, facias and eaves boards upto floor five
6040 level excluding the cost of centering, shuttering, cu.m 7245.00
finishing and reinforcement with 1:2:4 (1 cement:
2 coarse sand: 4 graded stone agg 20mm nominal
size)
Reinforced cement concrete work(1:2:4) (1

basaltic aggreate 20mm nominal size )in
suspended floors, roofs,landings, shelves and their
supports and balconies upto floor five level
6041 cu.m 8261.00
including finishing and plastering the ceiling with
cement mortar (1:3) (1 cement: 3 fine sand) of
thickness not exceeding 6mm to give a smooth
and even surface but excluding the cost of
centering and shuttering
Reinforced cement concrete work (1:1½:3) (1

cement:1½ coarse sand: 3 graded granitic or
basaltic aggreate 20mm nominal size)in
suspended floors, roofs, landings, shelves and
6042 their supports and balconies upto floor five level cu.m 8513.00
including finishing and plastering the ceiling with
C.M. (1:3) (1 cement: 3 fine sand) of thickness not
exceeding 6mm to give a smooth and even surface
but excluding the cost of centering and shuttering
Reinforced cement concrete work 1:2:4 (1

cement: 2 coarse sand: 4 granitic or basaltic stone
aggreate 20mm nominal size excluding plastering

and cost of centering, shuttering & reinforcement,
6043 in sloping or battering surface (slabs, beams,
louvers, etc)
Where inclination to the horizontal does not
i cu.m 6828.00
exceed 30°
ii Where inclination to the horizontal exceeds 30° cu.m 6995.00
Reinforced cement concrete work 1:1½:3 (1
cement: 1½ coarse sand: 3 granitic or basaltic
stone aggreate 20mm nominal size excluding

plastering and cost of centering, shuttering &
6044 reinforcement, in sloping or battering surface
(slabs, beams, louvers, etc)
i cu.m 7086.00
exceed 30°
ii Where inclination to the horizontal exceeds 30° cu.m 7259.00
Centering & shuttering including Strutting,

Propping & removal of forms for :
i Foundations, Footings, Bases for columns sq.m 407.00
Vertical surfaces such as retaing walls, return
walls, Partitions, walls (any thickness) including
ii sq.m 479.00
attached Pilasters, Buttresses, Plinth and string
courses, Fillets and the like
Columns, Piers, Pillars, Aburments, Posts and
iii sq.m 598.00
struts (square rectangle polygon in plan)
Sides and Soffits of beams, Beam Haunchings,
iv Cantilever, Girders, Bressumers and Lintels plinth sq.m 412.00
beams not exceeding 1m in depth
Sides and Soffits of beams, Beam Haunchings,
v Cantilever, Girders, Bressumers and Lintels plinth sq.m 527.00
6045 beams exceeding 1m in depth
Staircases (except spiral staircases) excluding
vi sq.m 343.00
landing
vii Spiral staircases including landing sq.m 431.00
viii Arches, domes, vaults upto 6.00 span sq.m 1313.00
Extra for arches, domes, shell roofs exceeding 6m.
ix sq.m 1921.00
Span.
Domes, vaults, shell roofs having curved surface in
x sq.m 2273.00
both the directions.
xi Chimneys & shafts sq.m 479.00
xii Well steining sq.m 476.00
Suspended floors, roofs landings, shelves & their
xiii sq.m 644.00
supports
Vertical or horizontal fins individually forming
xiv sq.m 678.00
box louvers or projected bands
Centering & shuttering including Strutting,
Propping & removal of forms for sloping or

battering surface (slabs, beams, louvers, etc)
including folded plates
i exceed 30° requiring shuttering on the underside sq.m 805.00
only
6046
Where inclination to the horizontal exceeds 30°
requiring shuttering on the underside &
ii sq.m 936.00
upperside if required (Only area of underside
shall be measured for payment)
Columns, Pillars, Posts & struts (circular or curved
iii sq.m 725.00
in plan)
iv Cornices & Mouldings sq.m 647.00
Extra to be added for additional height in
centering, shuttering where ever required with
adequate bracing, propping etc. including cost of
de- shuttering and de-centering at all levels, over
6047 sq.m 297.00
a height of 3.5m, for every additional height of 1m
or part thereof. (Plan area to be measured)
Suspended floors, roofs, landings, beams and
balconies (plan area to be measured)
Providing and laying RCC work 1:2:4 (1 cement

coarse sand: 4 granitic or basaltic stone aggreate
20mm nominal size in chajjas not exceeding
15cms thickness upto 1st floor level including
finishing and plastering the exposed surface with
6048 cu.m 18900.00
cement mortar 1:3 (1 cement: 3 fine sand) of
thickness not exceeding 6mm to give an even
surface throating & moulding, centering &
shuttering complete but excluding cost for
reinforcment
RCC work 1:2:4 (1 cement: 2 coarse sand: 4

granitic or basaltic stone aggreate 20mm nominal
size in chajjas exceding 15cms thickness upto 1st
level including finishing and plastering the
6049 exposed surface with cement mortar 1:3 (1 Cu.m. 11615.00
cement: 3 fine sand) of thickness not exceeding
6mm to give an even surface throating &
moulding, centering, shuttering but excluding cost
of reinforcement
Providing corrosion resistant steel CRS-50 bars of

(SAIL, TATA, VIZAG, JSW Steel Ltd.)(Confirming to
IS 1786 if 1985) for RCC work including bending,
binding & placing in position in all the floors
6050 kg 108.00
along with factory made precaste concrete cover
blocks of specified s izes whose compressive
strengthis not less than that of surrounding
concrete in the structural member .
Providing Mild steel reinforcement bars of (SAIL,

TATA. VIZAG, JSW Steel Ltd.) )(Confirming to IS
1786 of 1986) for RCC work including bending,
binding & placing in position in all the floors along
6051 kg 104.00
with the factory made precast concrete cover
blocks of specified sizes whose compressive
strength is not less than that of surrounding
concrete in the structural member.
Providing TMT steel reinforcement bars of (SAIL,
TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS
1786 of 1986) for RCC work (conforming to I.S.
1786 of 1986) including bending, binding &
6052 placing in position in all the floors along with the kg 105.00
factory made precast concrete cover blocks of
specified sizes whose compressive strength is not
less than that of surrounding concrete in the
structural member.
Providing High yield strength steel reinforcement

bar (HYSD)/TMT steel reinforcement bar from
secondary producers (Confirming to IS 1786 of
1986) for RCC work including bending, binding &
6053 placing in position in all the floors along with the Kg 87.00
factory made precast concrete cover blocks of
specified sizes whose compressive strength is not
less than that of surrounding concrete in the
structural member.
Bending, binding & placing in position mild steel

or TMTor High yield strength deformed
reinforcment including cost of wire for binding
but excluding cost of mild steel in R.C.C all the
6054 Kg 12.00
floors alongwith factory made precast concrete
cover blocks of specified sizes whose compressive
strength is not less than that of the surrounding
concrete in the structural member.
Extra for rendering smooth the top of the

suspended floors, landing and staircase (treads
and risers) with cement mortar 1:2 (1 cement: 2
coarse sand) including a floating coat of neat
6055 cement and protecting the surface with a layer if sq.m 147.00
7.5 cms of earth laid over 15mm layer of fine sand
in case of suspended floor and bricks laid in mud
mortar in landing of steps including subsequent
removal and cleaning of the same
Applying cement slurry on RCC slab on cement

concrete work using 2.75kgs of cement per sq.m
6056 sq.m 33.00
for receiving cement concrete floor including
roughening, cleaning, etc complete
Providing Pre-cast cement concrete jali 1:2:4 (1
cement: 2 coarse sand: 4 stone aggreate 6mm
nominal size) reinforced with 1.6mm dia mild
steel wire including centering and shuttering,

roughening, cleaning, fixing and finishing in
6057 cement mortar 1:3 (1 cement: 3 fine snad) all
complete excluding plastering of the jambs, sills
and soffits
i 50mm thick sq.m 2185.00
ii 40mm thick sq.m 2083.00
iii 25mm thick sq.m 1879.00
cm.
depth/
Providing and filling in position Bituminous filler
cm.
6058 of proportion 80kg of hot bitumen, 1kg of cement 331.00
width/
and 0.25 cu.m. of coarse sand for expansion joint
100m
length
Providing and fixing in position copper plate as
6059 sq.m 568.00
per design for expansion joint
Smooth finishing of the exposed surface of RCC
6060 work with 6mm thick cement mortar 1:3 (1 sq.m 180.00
cement: 3 fine sand)
Extra for laying Reinforced cement concrete in or
cu.m per
under water and/or liquid mud including cost of
6061 meter 498.00
pumping or bailing out water and removing slush
depth
etc. complete
Extra for laying reinforced cement concrete in or
6062 cu.m 210.00
under foul positions
Providing and fixing sheet covering over
expansion joints with iron screws as per design to
match the colour/shade of the wall treatment
6063 Non-Asbestos fibre cement board 6mm thick as
per I.S. 14862
i 150mm wide Metre 122.00
ii 200mm wide Metre 157.00
Providing and fixing G.I. sheet of 26 S.W.G. for
using in construction/Expansion joint wherever
6064 Metre 533.00
necessary as per directions of the Engineer-in-
Charge.
Providing and laying in position machine batched
concrete (BMC), machine mixed and machine
vibrated design mix cement concrete of specified
grade for reinforced cement concrete work
including pumping of concrete to the site of laying
but excluding the cost of centering , shuttering,
finishing and reinforcement including admixtures
6065 cu.m 8058.00
in recommended proportions as per IS 9103 to
accelerate, retard setting of concrete, improve
workability without impairing the strength and
durability as per the direction of the Engineer-in-
charge. M25 grade of reinforced cement conrete
by using 410kg of cement per cu.m. of concrete.
All works upto floor V level.
Deduct for providing leaner mixes respectively at

all floor levels
Providing M-15 grade concrete by using 325kgs of
i cement per cu.m of concrete instead of M-25 cu.m 660.00
6066
grade of B.M.C.
ii cement per cu.m of concrete instead of M-25 cu.m 82.00
grade of B.M.C.
Add for providing richer or leaner mixes

respectively at all floor levels
i cement per cu.m. of concrete instead of M-25 cu.m 82.00
grade of B.M.C.
6067 Providing M-35 grade concrete by using 428kgs of
ii cement per cu.m. of concrete instead of M-25 cu.m 146.00
grade of B.M.C.
iii cement per cu.m. of concrete instead of M-25 cu.m 206.00
grade of B.M.C.
Deduct for using less cement than the quality as
6068 provided in the item of batch mix concrete as Tones 762.00
arrived as per the mix design
Providing and laying in position ready mixed
concrete (RMC) with usage of Ordinary Portland
Cement manufactured in fully automatic batching
plant and transported to site of work in transit
mixer for a lead upto 10kms having continuous
agitated mixer, manufactured as per mix design of
specified grade for reinforced cement concrete
work including pumping of R.M.C., from the
a
transit mixer to the site of laying, excluding the
cost of centering, shuttering, finishing and
reinforcement including the cost of admixtures in
recommended porportions as per IS : 9103 to
6069
accelerate/retard setting of concrete, improve
workability without imparing strength and
durability as per the directions of the engineer-in-
charge. All works upto floor V level
i M-10 grade of concrete cu.m 7691.00
ii M-15 grade of concrete cu.m 8016.00
iii M-20 grade of concrete cu.m 8223.00
iv M-25 grade of concrete cu.m 8440.00
v M-30grade of concrete cu.m 8874.00
vi M-35 grade of concrete cu.m 8983.00
vii M-40 grade of concrete cu.m 9200.00

concrete (RMC) with usage of Ground Granulated
Blast Furnace Slag (GGBS) as per IS 12089 and
IS456-2000 manufactured in fully automatic
batching plant and transported to site of work in
transit mixer for a lead upto 10kms having
continuous agitated mixer, manufactured as per
mix design of specified grade for reinforced
c cement concrete work including pumping of
R.M.C., from the transit mixer to the site of laying,
6069 finishing and reinforcement including the cost of
admixtures in recommended porportions as per
IS : 9103 to accelerate/retard setting of concrete,
improve workability without imparing strength
and durability as per the directions of the
engineer-in-charge. All works upto floor V level
concrete (RMC) High Performance Concrete per
MORTH clause 1715 manufactured in fully
automatic batching plant and transported to site
of work in transit mixer for a lead upto 10kms
having continuous agitated mixer, manufactured
as per mix design of specified grade for reinforced
cement concrete work including pumping of
d
R.M.C., from the transit mixer to the site of laying,
finishing and reinforcement including the cost of
admixtures in recommended porportions as per
6069
IS : 9103 to accelerate/retard setting of concrete,
improve workability without imparing strength
and durability as per the directions of the
engineer-in-charge. All works upto floor V level
Extra for RCC with B.M.C/R.M.C work (with
6070 pump) above floor five level for each four floors or cu.m 293.00
part thereof
Extra for carriage of R.M.C. beyond the initial lead cu.m./
6071 47.00
of 10 kms. km
Providing & applying Rustonil (P.no.569) or
equivalent for removing rust & phospating of
6072 steel structures or steel reinforcement in RCC to sq.m 369.00
be applied in 1 coat it necessary then 2nd coat)
before application of bonding agent.
Extra for reinforced concrete work in super
6073 structure above floor five level for every four cu.m 702.00
floors or part there of.
6074 Extra for shuttering in circular work sq.m 20%
Providing and fixing precast reinforced concrete
door frames of ASTRA make or equivalent in M25
grade concrete and reinforced with minimum
three bars of 6 mm dia and confirming to IS:6523.
The frames shall be manufactured in approved

factory with all the necessary arrangements for
fixing hinges, tower bolts by way of inserted PVC
blocks and holes for receiving sliding bolts as
6075 specified. Sectional size of frame with single
rebate : 60X 100 mm
i 2100 X 750 mm Metre 368.00
ii 2100 X 900 mm Metre 366.00
iii 2100 X 1000 mm Metre 365.00
iv 2050 X 750 mm Metre 369.00
v 2050 X 900 mm Metre 367.00
vi 2050 X 1000 mm Metre 366.00
Providing and laying reinforced cement concrete
of grade M-25 (Mix design) with coarse sand &
graded granatic or basaltic stone Aggregate 20
mm nominal size as per mix design requirment
excluding plastering & cost of
centering/shuttering & reinforcement. including
6076 admixtures in recommended proportions as per cu.m 7624.00
IS 9103 to accelerate, retard setting of concrete,
improve workability without impairing the
strength and durability as per the direction of the
Engineer in charge. M-25 grade of reinforced
cement concrete by using 410 kg of cement per
cu.m of concrete. All works upto floor five level.
Providing Concrete additive to enhance strength

and durability of concrete by mixing in to concrete
with ultra-fine additive such as Alccofine 1203
manufactured by M/s. Counto Microfine Products
Pvt Ltd. or Equivalent Goa or equivalent to
improve the properties of concrete such as
6077 strength and durability. Ultra-fine additive shall Kg/Cu.m 675.00
have the Particle Size Distribution of d90
<9microns and d50 <5microns. Such material
shall comply to IS 1727 for cement reactivity test
and ASTM C1240 for accelerated pozzolanic
activity test. Addition rate shall be 25 kg per cubic
meter for all grades of concrete.
Providing & Applying Curing Compound AC-
CURE-R (Resin based curing compound) or
equivalent @ 1.82 KG per 10 Sq.m on concrete
6078 Kg. 96.00
surface conforming to ASTM: C- 309,BS:7542,BS:
8110 Part 1 complete and as per the direction of
Engineer in-Charge.
Providing Fusion Bonded Epoxy Coated TMT steel

reinforcement bars Fe-500 Grade (Confirming to
IS 1786:2008 & IS 13620:1993) for RCC work
including bending, binding & placing in position at
6079 kg 118.00
all the floors along with the factory made precast
concrete cover blocks of specified sizes whose
compressive strength is not less than that of
surrounding concrete in the structural member.
CHAPTER X
WOOD WORK
Providing woodwork in frames of doors,
windows, clerestory windows trusses & other
frames wrought framed and fixed in positon.
7001 a First class Indian teak wood cu.m 194210.00
b Second class Indian teak wood cu.m 167470.00
c First class matti wood cu.m 121175.00
d Second class matti wood cu.m 108792.00
Providing wood work in frames of false ceiling,

7002 partitions etc., sawn and put up in position.
a Second class matti wood cu.m 104851.00
Providing and fixing woodwork wrought, framed
and fixed in position in purlins common rafters,

bressumers, wall plates joists and the like in roof
7003 work.
a Second class Indian teak wood cu.m 153068.00
b First class matti wood cu.m 111678.00
c Second class matti wood cu.m 99332.00
Providing & fixing 20 mm caves barge broads 1st
7004 sq.m 3489.00
class matti wood
Providing & fixing 20 mm caves barge boards 2nd
7005 sq.m 3256.00
class matti wood
Providing and fixing 50 mm thick panelled glazed
or panelled and glazed shutters for doors,
windows and clerestory window including
7006 anodized aluminium butt hinges with necessary
screws:
a First class Indian teak wood sq.m 9767.00
b Second class Indian teak wood sq.m 8386.00
Providing and fixing 44 mm. thick panelled, glazed

or panelled and glazed shtters for doors, windows

7007 and clestory windows including anoodized
aluminium butt hinges with necessary screws.
a Second class Indian teak wood sq.m 7533.00

7008
anodized aluminium butt hinges with necessary
screws:
windows and clerestory window including black
7009 enamelled iron butt hinges with necessary
screws:
b Nano or equivalent sq.m 3306.00
7010 anodized aluminium butt hinges with necessary
screws:
a First class Indian teak wood sq.m 7813.00

windows and clerestory window including black
7011 enameled iron butt hinges with necessary screws:
Deduct if 38 mm or 35 mm thick fixed shutters
(without hinges are provided instead of openable

shutters for doors, windows or clerestory
windows with:
Anodised aluminium butt hinges with necessary
7012 a
screws :
For second class teak wood and other inferior
sq.m 330.00
class of wood shutters.
Black enamelled iron hinges with necessary
b sq.m 140.00
screws
Providing and fixing 25 mm thick panelled and
glazed shutters for cupboards etc. in 2 nd class
7013 sq.m 5413.00
indian teak wood including anodised butt hinges
with necessary screws.
or panelled and glazed shutters for cupboards

etc. including black enamelled iron hinges with
7014 necessary screws.
Extra for superior type of glass panes used instead
of ordinary glass panes in glazed or panelled and
7015 sq.m 116.00
glazed doors, windows, clerestory windows (total
area of shutters to be measured).
Providing & fixing flush door shutters decoration
type core of block board construction with frame
of first class hard wood and well matched first

class Indian teak ply veneering with vertical
grains and cross bands and face veneers on both
faces of shutters.
40 mm thick including anodized aluminium butt
a sq.m 4226.00
7016 hinges with necessary screws:
35mm thick including anodized aluminium butt
b sq.m 3809.00
hinges with necessary screws:
c sq.m 3340.00
25 mm thick (for cupboard) including nickle
d plated bright finished M.S. piano hinges with sq.m 3011.00
necessary screws.
Providing and fixing flush doors shutters
commercial type, core of block board construction
with frame of first class hard wood and well

matched commercial ply veneering and vertical
grains or cross bands and face veneers on the
both other faces of shutters.
a sq.m 3381.00
b sq.m 2763.00
c sq.m 2453.00
necessary screws.
Providing and fixing flush door shutters, core of
block board construction with frame of first class
hard wood and well matched first class Indian
teak ply veneering with vertical grains or cross

band and face veneers on one face and
commercial ply venerring with vertical grains or
cross bands and face veneer on other face of
7018 shutters.
a sq.m 3028.00
b sq.m 2763.00
c sq.m 2453.00
necessary screws.
Providing and fixing flush door shutters
decorative type core of particle board (medium
density) construction with frame of first class

hard wood and well matched teak ply veneering
7019 with vertical grains or cross bands and face
veneer on both faces of shutters.
25 thick (for cupboard) including nickle plated
a bright finished M.S. piano hinges with necessary sq.m 1913.00
screws.
commercial type, core of block board construction

matched commercial ply veneering and vertical
grains or cross bands and face veneers on the
both faces of shutters.
a sq.m 4921.00
b sq.m 4505.00
c sq.m 4055.00
25 mm thick (for cupboard including nickle plated
d bright finished M.S. piano hinges with necessary sq.m 3717.00
screws.
Providing and fixing flush door shutter core of
particle board (medium density) construction
matched first class Indian teak ply veneering with
vertical grains or cross band and face veneer on
one face & commercial ply veneering with
vertical grain
7021 a sq.m 4087.00
b sq.m 3469.00
c sq.m 3159.00
necessary screws.
Providing and fixing flush door decorative type
cellular core construction with frame of first class
hard wood and well matched first class Indian
teak ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters.
a sq.m 2965.00
7022
b sq.m 2775.00
c sq.m 2996.00
necessary screws.
commercial type, cellular core construction with
frame of first class hard wood and well matched

commercial play veneering and vertical grains or
cross bands and face veneers on the both other
faces of shutters.
a sq.m 3346.00
b sq.m 3153.00
c sq.m 2965.00
necessary screws.
Providing and fixing flush door shutters of
cellular core construction with frame of first class
hardwood and well matched first class Indian teak
ply veneering with vertical grains or cross band
and face cover on one face and commercial ply
veneering with vertical grain or cross band and
7024 face veneer an other face of shutter.
a sq.m 2459.00
b sq.m 2838.00
c sq.m 2712.00
necessary screws.
Providing & fixing flush door shutters of solid core
construction with plywood panel fixed on either
side of the shutters alongwith polymer sheet
overlaid on the exterior surface (wooden or
7025 equivalent ) as per manufacturers specifications sq.m 3422.00
with second class Indian teak wood lipping (not
less than 6 mm thick) all round 30 mm thick
shutter with bright finished brass hinges 100 x 70
x 4 mm with brass screws.
Providing and fixing factory made panel doors

made of kiln seasoned and preservative treated
hardwood & rails vertical stiles & top rail of 100
mm width, bottom rails and lock rail of 175 mm,

width & panels made of 12 mm thick both sides
commercial, veneered teakwood particle board
blended with formal dehyde phenol synthetic
7026 resin adhesive conforming to I.S. 3097 of 1965
40 mm thickness with anodised aluminium hinges
a sq.m 3293.00
(100 x 75 x 4mm) with C.P. brass screws.
b sq.m 3605.00
c sq.m 3542.00
Extra for providing vision panel not exceeding 0.1
sq.m. in all types of flush doors (cost of glass
7027 excluded).
a Rectangular or square Unit: SQ.M. door area sq.m 70.00
b Circular : Unit : SQ.M.door area sq.m 73.00
Extra if louvers not exceeding 0.2 sq.m. are
7028
provided in flush door shutters.
a Decorative type door. Unit: SQ.M. door area. sq.m 56.00
b Commercial type door : Unit: SQ.M. door area sq.m 38.00
Extra for cutting rebate in flush door shutter (total
7029 sq.m 42.00
area of the door to be measured)
Providing and fixing 38 mm thick battened and
framed door shutters including bright finished or

and black enamelled iron hinges with necessary
7030 screws.
Providing and fixing 19 mmthick battened door
and window shutters with necessary ledges and
braces (25 mm) including bright finished or and
7031 black enamelled iron hinges with necessary
screws.
Providing and fixing 38 mm thick wire gauze
shutters, using galvanized m.s. wire gauze of i..s.
gauze designation 85 g with wire of dia 0.71mm

7033 for doors, windows and clerestory windows
including M.S oxidized butt hinges and necessary
with necessary screws.
gauze designation 85 g with wire of dia 56 mm

including anodized aluminium butt hinges and
necessary with necessary screws.
gauze designation 85 g with wire of dia 0.56 mm

including bright finished or/and black enamelled
iron hinges with necessary screws.
Providing and fixing 38 mm thick louvered
shutters with fixed or movable venetians 12 mm
thick for windows including bright finished or
7036
and black enamelled, iron hinges with necessary
screws.
Providing and fixing louvers 50 mm wide in
grooves in clerestory window frames excluding
the cost of frames.
7037
a Second class Indian teak wood 12 mm thick sq.m 3019.00
b Glass sheets 3 mm thick sq.m 958.00
c Frosted glass sheets 3mm thick sq.m 1361.00
Providing and fixing plain jaffri of 38 mm x 12 mm
laths placed 38 mm apart (frame to be paid
7038 .
separately) including fixing 50 mm x 12 mm
beading complete with.
a Nano or equivalent sq.m 1899.00
Providing & fixing half split coconut wood rafters
purlins, ridges, bressumers, wall plates and like in
7039 Metre 162.00
the roof work including splitting chipping planing,
chiselling etc. complete;
Providing & fixing 1/3rd split (one third) coconut
wood rafters, purlins, bressumers and like in the
7040 Metre 134.00
roof work including splitting, chipping, planing,
chiselling etc. complete.
Providing and fixing compound gates as per
standard design including M.S. straps, clamps
pintals sets with pin clamps fixed in cement
7041 concrete blocks 50 x 30 x 20 cm of 1:3:6 mix
aggregate 20 mm nominal size complete with
Providing 2nd class 50 x 50 x 50 mm Indian teak

7042 wood plugs including cutting brickwork and fixing Each 32.00
in cement mortar 1:3 (1 cement: 3 fine sand)
Providing and fixing 4 mm thick plywood plain

lining with necessary screws, priming coat on
7043 unexposed surface etc. complete with
a Marine ply facing of approved manufacture sq.m 1330.00
b Commercial ply facing of approved manufacture sq.m 1188.00
Providing and fixing first class Indian teak wood
moulded beading to door and window frames

7044 with iron screws, plugs and priming coat on
unexposed surfaces etc.
a 50 x 12 mm Metre 202.00
Providing & fixing 12 mm thick & 100 mm wide
pelmet with 25 mm diameter, wooden curtain rod

and bracket including fixing within 25 x 3 mm flat
7045 10 cm long and plugs etc. complete.
a First class Indian teak wood Metre 888.00
b Second class Indian teak wood Metre 568.00
Providing and fixing curtain rods of 1.25 mm thick
anodized aluminium plates brackets in pelment
instead of wooden curtain rods of 25 mm
7046
diameter and brackets (actual length of rods to be
measured).
a 12 mm dia. Metre 470.00
Providing and fixing in partition 4 mm thick with
Marine plywood of approved quality including
7047 fixing in frames with brass screws etc. complete sq.m 1183.00
with 50 x 12 mm First class Indian teak wood
beading (frame to be paid separately).
Providing and fixing plain asbestos cement sheet

4 mm thick in partition including fixing to frames
7048 sq.m 574.00
with brass screws etc. complete with 50 x 12 nano
wood beading (frames to be paid separately).
Providing and fixing in partition 4 mm thick

Commercial plywood of approved quality
7049 including fixing in frames with brass screws etc. sq.m 633.00
complete with 50 x 12 mm second class Indian
teak wood beading (frame to be paid separately).
Providing flat iron hold fast 40 cm including fixing
to frame with 10 mm dia bolts, nuts and wooden
plugs and embeded in cement concrete block 30 x
7050 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6
stone aggregate 20 mm nominal size.
a 40 x 3 mm flat iron hold fast 40 cm long Each 139.00
b 40 x 3 mm flat iron hold fast, 15 cm long Each 99.00
25 mm thick wooden shelves supported on 40 x
40 x 6 mm T or L iron brackets fixed at suitable
distances but not exceeding 7 cm apart in 7.5 x 7.5

x 15 cm blocks of cement concrete mix 1 : 3 : 6 (1
7051 cement : 3 coarse sand : 6 graded stone aggregate
20 mm.nominal size) with
Providing and fixing M.S. round or square bars at
7052 required spacing in wooden frames of windows kg 108.00
and clerestory windows.
Providing and fixing M.S. round or square bars
7053 with M.S. flats at required spacings in wooden kg 104.00
frames of windows & clerestory windows.
Providing and fixing M.S. grill of required pattern
in wooden frames of Windows etc. with M.S. flats

square or round bars with round headed bolts and
7054 nuts or by by screws.
a Plain grill kg 142.00
b Ornamental grill kg 190.00
Providing and fixing expanded metal 20 x 60 mm
strands 3.25 mm wide & 1.6 mm thick for
7055 sq.m 1120.00
windows etc. including 62 x 19 mm beading of
second class Indian Teak Wood.
Providing and fixing fly proof galvanized M.S. wire
gauge of I.S. gauge designation 140 g. with wire of
7056 dia. 0.56 mm to windows and clerestory windows sq.m 1108.00
including 62 x 19 mm beading of second class
Indian wood .
Providing beams including hoisting fixing in
position & applying wood preservative for
7057
unexposed surfaces etc. complete with.
a First class matti wood cu.m 115706.00
Providing joist (karries) including hoisting, fixing
in position and applying wood preservative on
7058
unexposed surface etc. complete with.
b First class matti wood cu.m 111138.00
Providing and fixing jungle wood ballies in posts,
purlins rafters posts plates etc. including cast iron

nails & spikes required and applying wood
preservative on all exposed surfaces.
7059
a 80 mm dia Metre 67.00
b 100 mm dia. Metre 81.00
c 125 mm dia. Metre 125.00
d 150 mm dia. Metre 151.00
Providing and fixing jungle wood ballies in
trusses including cost of iron nails and spikes

required and applying wood preservative on all
exposed surfaces.
7060
d 150 mm dia. Metre 174.00
Providing and fixing bright finished brass butt

hinges with necessary screws etc complete
a 125 x 70 x 4 mm (ordinary type) Each 426.00
7061
b 100 x 70 x 4 mm (ordinary type) Each 312.00
c 75 x 40 x 2.5mm (ordinary type) Each 167.00
d 50 x 40 x 2.5mm (ordinary type) Each 108.00
Providing and fixing bright finished brass
parliamentary hinges with necessary screws etc
7062 complete
a 100 x 125 x 27 mm x 5 mm Each 877.00
b 75 x 100 x 20 x 3.2 mm Each 728.00
Providing and fixing bright finished brass single
acting spring hinges with necessary screws etc
complete
7063
a 150 mm Each 854.00
b 125 mm Each 720.00
c 100 mm Each 661.00
Providing and fixing bright finished brass double
acting spring hinges with necessary screws etc
complete
7064
a 150 mm Each 1159.00
b 125 mm Each 983.00
c 100 mm Each 866.00
Providing and fixing bright finished brass rising
hinges with necessary screws etc complete (left
or right)
7065
a 150 mm Each 467.00
b 125 mm Each 350.00
c 100 mm Each 303.00
Providing and fixing bright finished brass sliding

door bolts with nuts and screws etc complete
7066
a 300 x 16 mm Each 1791.00
b 250 x 16 mm Each 1497.00
Providing and fixing bright finished brass tower

bolts (barrel type) with screws etc. complete
a 250 x 10 mm Each 572.00
7067
b 200 x 10 mm Each 453.00
c 150 x 10 mm Each 345.00
d 100 x 10 mm Each 258.00
Providing and fixing bright finished brass flush

bolts with necessary screws etc complete
7068 a 250 mm Each 525.00
b 150 mm Each 345.00
c 100 mm Each 269.00
Providing and fixing bright finished brass handles

with necessary screws etc complete
7069
a 125 mm Each 169.00
b 100 mm Each 128.00
Providing and fixing bright finished brass door

latch with necessary screws etc complete
7070
a 300x 16 x 5 mm Each 1716.00
b 250 x 16 x 5 mm Each 1599.00
Providing & fixing bright finished brass 100 mm.
mortice latch & lock & a pair of levers, handles
7071 Each 2625.00
with necessary screws etc. complete (Indian make
of approved quality).
Providing & fixing bright finished brass 100 mm.
rim latch & lock & a pair of knob, with necessary
7072 Each 2273.00
screws etc. complete (Indian make of approved
quality).
Providing and fixing 50-mm. bright finished brass
7073 Each 295.00
cupboard or wardrobe knob.
Providing and fixing 150 mm. bright finished
7074 brass floor door stopper with rubber cushion Each 395.00
screws etc. to suit shutter thickness complete.
Providing and fixing bright finished brass hard

drawn hooks and eyes.
a 300 mm Each 219.00
7075 b 250 mm Each 210.00
c 200 mm Each 201.00
d 150 mm Each 184.00
e 100 mm Each 175.00
Providing and fixing bright finished brass
7076 quadrant stays with necessary screws etc. Each 386.00
complete
Providing and fixing bright finished brass fan light
7077 Each 68.00
catch with necessary screw etc. complete
Providing and fixing bright finished brass ball
7078 Each 49.00
catcher 10 mm dia.
Providing and fixing 300 mm long bright finished
7079 brass chain with hooks for fan light including Each 31.00
necessary screws etc.complete.
Providing and fixing bright finished brass hasp
and staples (safety type) with necessary screws
etc. complete.
7080
a 150 mm Each 164.00
b 115 mm Each 119.00
c 90 mm Each 112.00
Providing and fixing 65 x 35 mm. special quality
bright finished brass cupboard locks with six
7081 levers of reputed firms such as Godrej or Each 578.00
equivalent including necessary screws etc.
complete.
Providing and fixing bright finished brass helical
7082 Each 655.00
door spring superior quality.
Providing and fixing brass hydraulic door closer
7083 of make Everest universal 68 or equivalent with Each 2102.00
necessary screws and fittings complete.
Providing and fixing chromium plated brass butt

hinges with necessary screws etc. complete
7084 a 125 x 70 x 4.0mm (ordinary type) Each 486.00
b 75 x 40 x 2.5 mm (ordinary type) Each 185.00
c 50 x 40 x 2.5 mm (ordinary type) Each 127.00
Providing and fixing chromium plated brass
parliamentary hinges with necessary screws etc.
7085 complete
a 100 x 125 x 27 x 5 mm Each 916.00
b 75 x 100 x 20 x 3.2 mm Each 772.00
Providing and fixing chromium plated brass single
action spring hinges with necessary screws etc.
complete
7086
a 150 mm. Each 844.00
b 125mm Each 803.00
c 100 mm Each 694.00
double acting spring hinges with necessary
screws etc. complete.
7087
a 150 mm Each 1243.00
b 125mm Each 1067.00
c 100mm Each 929.00
Providing and fixing chromium plated brass rising
hinges with necessary screws etc. complete. (right
or left)
7088
a 150 mm Each 492.00
b 125 mm Each 375.00
c 100 mm Each 307.00
sliding door bolt with bolts, nuts and screws etc.
7089 complete.
a 300 x 16 mm Each 1284.00
b 250 x 16 mm Each 1074.00
Providing and fixing chromium plated brass tower

(barrel type) with necessary screws etc. complete
7090
a 300 x 16 x 5 mm Each 1847.00
b 250 x 16 x 5 mm Each 1589.00
Providing & fixing chromium plated brass tower
7091 bolts (barrel type) with necessary screws
complete.
a 250 x 10 mm Each 616.00
b 200 x 10 mm Each 494.00
c 150 x 10 mm Each 373.00
d 100 x 10 mm Each 291.00
Providing and fixing chromium plated brass flush

bolts with necessary screws etc. complete
7092 a 250 mm Each 562.00
b 150 mm Each 354.00
c 100 mm Each 277.00

handle with necessary screws etc. complete
7093 a 125 mm Each 193.00
b 100 mm Each 158.00
c 75 mm Each 126.00
Provided and fixing chromium plated brass 100
mm. mortice latch and a pair of levers and handles
7094 Each 2701.00
with necessary screws etc. complete (Indian make
of approved quality).
Provided and fixing chromium plated brass 100-
mm. rim latch and lock and a pair of knobs with
7095 Each 2697.00
necessary screws etc. complete (Indian make of
approved quality).
Providing and fixing chromium plated brass 50
7096 mm cupboard or wardrobes knobs with nuts Each 46.00
complete
Provided and fixing 150 mm chromium plated
7097 brass floor door stopper with rubber cushion Each 402.00
screws etc. to suit shutters thickness complete.
Providing and fixing chromium plated brass hard
Each
drawn hooks and eyes
a 300 mm. Unit: per hook and eye Each 237.00
7098 b 250 mm. Unit: per hook and eye Each 225.00
c 200 mm. Unit: per hook and eye Each 213.00
d 150 mm. Unit: per hook and eye Each 188.00
e 100 mm. Unit: per hook Each 184.00
Providing and fixing chromium plated brass hasp
and staple (safety type) with necessary screws
7099 etc. complete
a 150 mm Each 94.00
b 115 mm Each 73.00
Providing and fixing 65 x 35 mm special quality
7100 chromium plated brass cupboards lock with six Each 578.00
levers including necessary screws etc. complete.
Providing and fixing M.S. pressed butt hinges
bright finished with necessary screws etc.
complete.
7101 a 125 x 65x 2.12mm Each 83.00
b 100 x 50 x 1.90 mm Each 59.00
c 75 x 47 x 1.70 mm Each 40.00
d 50 x 37 x 1.50 mm Each 28.00
Providing and fixing M.S. pressed parliamentary

hinges with necessary screws etc. complete.
a 150 x 125 x27x2.80 mm Each 120.00
7102
b 125x125x27x1.80 mm Each 90.00
c 100x125x27x1.80 mm Each 60.00
d 75 x 100x20x2.24 mm Each 48.00
Providing and fixing M.S. single acting spring
hinges bright finished with necessary screws etc. Each
complete.
7103
a 150 mm Each 436.00
b 125 mm Each 389.00
c 100 mm Each 329.00
Providing and fixing M.S. double acting spring
hinges bright finished with necessary screws etc.
complete.
7104
a 150 mm Each 577.00
b 125 mm Each 506.00
c 100 mm Each 388.00
Providing 1mm thick M.S. piano hinges finished
7105 with brass plating flange being 35 mm wide & Each 389.00
fixing with necessary screws.
Providing 1mm thick M.S. piano hinges finished
7106 with nickle plating, flange being 35 mm wide & Each 595.00
fixing with necessary screws.
Providing and fixing M.S. Tee hinges bright
finished or and black enamelled, with necessary
7107 screws etc. complete
a 300 x 115 x 2.24 mm Each 32.00
b 250 x 100 x 2.24 mm Each 31.00
Providing & fixing ms. Sliding door bolts bright
finished or and black enamelled with nuts and
7108 screws etc. complete
a 300 x 16 mm Each 387.00
b 250 x 16 mm Each 309.00
Providing and fixing M.S. door latch with screws

7109 etc. complete
a 300 x 20 x 6 mm Each 232.00
b 250 x 20 x 6 mm Each 240.00
Providing and fixing M.S. tower bolts (barrel type)

with necessary screws etc. complete
a 250 x 10 mm Each 156.00
7110
b 200 x 10 mm Each 98.00
c 150 x 10 mm Each 68.00
d 100 x 10 mm Each 53.00
Providing and fixing M.S. handles with necessary

7111 a 125 mm Each 136.00
b 100 mm Each 118.00
c 75 mm Each 89.00
Providing and fixing M.S. hooks and eyes
a 300 mm Each 32.00
7112 b 250 mm Each 27.00
c 200 mm Each 22.00
d 150 mm Each 19.00
Providing and fixing M.S. fan light pivots with
7113 Each 31.00
necessary screws etc. complete
Providing and fixing 300 mm long M.S. chain with
7114 hook for fan light including necessary screws etc. Each 46.00
complete.
Providing and fixing M.S. safety hasp and staple

7115 a 150 mm Each 27.00
b 115 mm Each 24.00
c 90 mm Each 22.00
Providing and fixing bright finished or and black
7116 Each 112.00
enamelled iron helical door spring
Providing and fixing oxidised M.S. pressed butt
hinges bright finished with necessary screws etc.
complete.
7117 a 125 x 65 x 2.12 mm Each 94.00
b 100 x 50 x 1.90 mm Each 79.00
c 75x47x1.70mm Each 57.00
d 50x3x1.50 mm Each 38.00
Providing and fixing oxidised M.S. pressed
parliamentary hinges with necessary screws etc.
complete.
7118 a 150x125x27x2.80mm Each 131.00
b 125x125x27x2.80mm Each 111.00
c 100x125x27x2.80mm Each 82.00
d 75x100x20x2.24mm Each 58.00
Providing and fixing oxidised M.S. single acting
spring hinges bright finished with necessary
7119
a 150 mm Each 440.00
b 125 mm Each 405.00
c 100 mm Each 343.00
Providing and fixing oxidised M.S. double acting
spring hinges bright finished with necessary
7120
a 150 mm Each 106.00
b 125 mm Each 97.00
c 100 mm Each 84.00
Providing 1 mm thick oxidised MS piano hinges
7121 finished with brass plating flange being 35 mm Each 603.00
wide and fixing with necessary screws.
Providing 1 mm thick oxidised MS piano hinges
7122 finished with nickle plating flange being 35 mm Each 697.00
wide and with necessary screws.
Providing and fixing oxidised MS tee hinges
bright finished or and black enamelled with
7123 necessary screws etc. complete.
a 300x115x2.24mm Each 46.00
b 250x100x2.24 mm Each 42.00
Providing and fixing oxidised M.S. sliding door

bolts with nuts and screws etc. complete
7124
a 300 x 16 mm Each 94.00
b 250 x 16mm Each 78.00
Providing and fixing oxidised M.S. door latch with

7125
a 300x20x6mm Each 90.00
b 250x20x6mm Each 69.00
Providing and fixing oxidised M.S. tower bolts

(barrel type) with necessary screws etc. complete
7126 a 250 x 10 mm Each 47.00

b 200 x 10 mm Each 32.00
c 150 x 10 mm Each 26.00
d 100 x 10 mm Each 35.00
Providing and fixing oxidised M.S. handles with

7127 a 125 mm Each 35.00
b 100 mm Each 31.00
c 75 mm Each 28.00
Providing and fixing oxidised M.S. hooks and eyes
a 300 mm Each 50.00
7128 b 250 mm Each 41.00
c 200 mm Each 37.00
d 150 mm Each 34.00
e 100 mm Each 28.00
Providing and fixing MS safety hasp and staple

7129 a 150 mm Each 46.00
b 115 mm Each 41.00
c 90 mm Each 40.00
Providing and fixing aluminium butt hinges
anodised transparent or dyed to required colour
or shade with necessary screw etc. complete.
7130 a 125 75 x 4 mm Each 169.00
b 100 x 75 x 4 mm Each 142.00
c 75 x 45 x 3.2 mm Each 104.00
d 50 x 45 x 3.2mm Each 62.00
Providing and fixing anodised aluminium sliding
door bolt anodised transparent or dyed required

colour and shade with bolts, nuts and screws etc.
7131 complete:
a 300 x 16 mm Each 353.00
b 250 x 16 mm Each 218.00
Providing and fixing aluminium tower bolt (barrel
type) anodised or dyed to required colour or
shade with screws etc. complete.
a 300 x 10 mm Each 35.00
7132
b 250 x 10 mm Each 32.00
c 200 x 10 mm Each 28.00
d 150 x 10 mm Each 22.00
e 100 x 10 mm Each 21.00
Providing and fixing aluminium handle anodised
or dyed to required colour or shade with screws
etc. complete.
7133
a 125 mm Each 29.00
b 100 mm Each 21.00
c 75 mm Each 20.00
Providing and fixing 50 cm long aluminium
kicking plate 100 x 15 mm anodised transparent
7134 Each 159.00
or dyed to required colour or shade with
necessary screws etc. complete.
Providing and fixing anodised aluminium flat latch
7135
a 300 mm Each 244.00
b 200 mm Each 205.00
Providing and fixing anodised aluminium hooks

and eyes.
7136
a 150 mm Each 16.00
b 100 mm Each 23.00
Providing and fixing anodised aluminium hasps

and staples
7137
a 100 mm Each 87.00
b 150 mm Each 100.00
Providing and fixing anodised aluminium

windows stay.
7138 a 300 mm narrow line with five adjustments Each 265.00
b 250 mm narrow line with four adjustments Each 245.00
c 200 mm narrow line with three adjustments Each 210.00
Providing and fixing anodised aluminium mortice
7139 Each 580.00
lock lever type handle (without lock)
Providing and fixing anodised aluminium mortice
7140 Each 538.00
lock knob type handle (without lock)
Providing and fixing anodised aluminium pivot
7141 Each 44.00
hinge 62 mm
Providing and fixing parliamentary hinges with

7142 nylon washers
a 100 x 31.75x4.76 mm Each 175.00
Providing and fixing anodized aluminium
7143 Each 432.00
ventilator latch 75 mm.
Providing and fixing anodized aluminium finger

push plate
7144
a 87 x 225 mm Each 68.00
b 75 x 150 mm Each 64.00
Providing and fixing factory made panelled door
shutter fabricated out of second class teak wood
with styles top and middle rail and lock and
bottom rail, with Navopan or equivalent plain
particle board exterior grade as per IS-3087
(1985) type I including anodized aluminium butt
7145 hinges with necessary screws etc. complete.
a 12 mm thick panel (i) 38 mm thick panel sq.m 6537.00
b 12 mm thick panel (ii) 35 mm thick panel sq.m 6279.00
c 12 mm thick panel (iii) 30 mm thick panel sq.m 7753.00
d 18 mm thick panel (i) 38 mm thick panel sq.m 6651.00
e 18 mm thick panel (ii) 35 mm thick panel sq.m 6393.00
f 18 mm thick panel (ii) 30 mm thick panel sq.m 7867.00
shutter fabricated out of Nano or equivalent wood
with styles top and middle rail and lock and
bottom rail, with Navopan or equivalent plain
particle board exterior grade as per IS -3087
(1985) type I including anodized alluminium butt
7146 hinges with necessary screws etc. complete.
a 12 mm thick panel (i) 38 mm thick panel sq.m 3802.00
b 12 mm thick panel (ii) 35 mm thick panel sq.m 3700.00
c 12 mm thick panel (iii) 30 mm thick panel sq.m 3615.00
d 18 mm thick panel (i) 38 mm thick panel sq.m 3915.00
e 18 mm thick panel (ii) 35 mm thick panel sq.m 3813.00
f 18 mm thick panel (iii) 30 mm thick panel sq.m 3729.00
Providing and fixing 12 mm sheets flat pressed
three layered melamine faced prelaminated wood
based particle board bonded with BWP/BWR
exterior grade synthetic resin panelling / cladding
as for wall panelling / cladding as per IS-3087
(1985) type I one side approved shade and other
7147 side balancing white lamination of Novapan make
or equivalent to be fixed to frames by cleates,
leaving expansion allowance of 6 MM in between
each panel. The width of the panel can be 1.5
feet/2 feet/3 feet as per Architects discretion.
a Second class teak wood. sq.m 1743.00
b Nano / kinal or equivalent sq.m 1313.00
Providing and fixing in position single skin
partition with second class teak wood, frame in
2.5" x 1.5" and with BWP/BWR exterior grade
synthetic resin as per IS-3087 (1985) type I on the
7148 sq.m 2016.00
edges of Navopan or equivalent. One side shade of
approved lamination and other side white
balancing lamination (PLX) on both sides it
lamination of approved shade (PTX).
Providing and fixing position 62 mm thick double

skin partition with frame in size 75 x 38 mm and
internal frame of 50 mm x 38mm and fixing of 12
mm thick flat pressed melamine faced three
layered prelaminated wood based particle board
7149
with exterior grade BWP /BWR synthetic resin as
per IS-3087 (1985) type I on the edges of
Navopan make or equivalent. One side shade of
approved lamination and other side white
balancing lamination
a Second class teak wood sq.m 2990.00
b Nano / equivalent sq.m 2275.00
with styles top and middle rail, lock and bottom
rail with Navopan or equivalent weather resistant
melamine faced prelaminated twin particle board
- bonded with BWP/BWR exterior grade synthetic
resin as per IS - 3087 (1985) type I including
7150 anodised aluminium butt hinges with necessary
a 12 mm thick panel (i) 38 mm thick sq.m 6351.00
b 12 mm thick panel (ii) 35 mm thick sq.m 6093.00
c 12 mm thick panel (iii) 30 mm thick sq.m 7567.00
d 18 mm thick panel (i) 38 mm thick sq.m 6692.00
e 18 mm thick panel (ii) 35 mm thick sq.m 6434.00
f 18 mm thick panel (iii) 30 mm thick sq.m 7908.00
shutter fabricated out of nano or equivalent wood
melamine faced prelaminated twin particle board
- bonded with BWP/BWR exterior grade synthetic
resin as per IS - 3087 (1985) type I including
7151 anodised aluminium butt hinges with necessary
screws etc. completed.
f 18 mm thick panel (iii) 30 mm thick sq.m 3770.00
melamine faced flat pressed three layered

prelaminated wood based particle board bonded
7152 with BWP/BWR exterior grade synthetic resin as
per IS - 3087 (1985) type I including anodised
aluminium butt hinges with necessary screws etc.
complete.
f 18 mm thick panel (ii) 30 mm thick sq.m 7949.00
shutter fabricated out of Nano or equivalent wood
melamine faced prelaminated flat pressed three

layered wood based particle board – bonded with
BWP/BWR exterior grade synthetic resin as per IS
- 3087 (1985) type I including anodised
7153 aluminium butt hinges with necessary screws etc.
complete.
f 18 mm thick panel (ii) 30 mm thick sq.m 3811.00
Providing and fixing flush door shutter of solid
core melamine face three layered, prelaminated
wood based particle board exterior grade having
shade of choice on both sides (PTX) or having
shade of choice on one side and balancing
lamination on the other side (PLX) as per IS 3087
(1985) type I on the edge of Novopan or
equivalent bonded with BWR/BWP synthetic

resin with second class teak wood, lipping of
7154 section of size 12 mm x 30 mm flange and 18 mm
x 10 mm web (18 mm deep) fixed into 18 x 10 mm
groves of shutter with water resistant adhesive
and fully threaded G.I. screws 50 mm not more
than 450 mm centre to centre including anodized
complete.
a Natural teak on both faces: 1) 35 mm thick sq.m 3094.00
b Natural teak on both faces: 2) 30 mm thick sq.m 2905.00
7155
section of size 12 mm x 30 mm flange and 18 mm
x 10 mm web (18 mm deep) fixed into 18 x 10 mm
complete.
Commercial on both faces: 1) 35 mm thick sq.m 2779.00
Commercial on both faces : 2) 30 mm thick sq.m 2653.00

section of size 12 mm x 30 mm flange and 18 mm
7156 x 10 mm web (18 mm deep) fixed into 18 x 10 mm
complete.
White balancing lamination on one face and
a sq.m 2969.00
natural teak on other face 35mm thick
White balancing lamination on one face and
b sq.m 2905.00
natural teak on other face 30mm thick
Providing FRP door shutters 35mm thick with
7157 frame size in clear opening of 0.75x2.10m hinges sq.m 1860.00
and screws complete.,
Single Colour Foam Core FRP (Fiber
Reinforced Polymer) Door Shutter
7158 Manufacture, Supply and Installation (including
accessories as mentioned below) of EPEE or
equivalent Goan make FRP (Fiber Reinforced
Polymer) door shutter of specified thickness as
per options below by using tray system with
seasoned hard wood, moisture less than 17%,
wood styles for Top rail and lock rails. FRP (Fiber
Reinforced Polymer) laminate made up of 450
grams per sq.mts (gsm) chop strand matt and
unsaturated polyester resin with viscosity range
of 400/450 centipoises per second (cps) . The
core of shutter will be filled as specified
(Expanded Polystyrene Foam / Polyurethane
Foam (EPS/PU) Foam). The shutter to be of single
colour & water proof as well as mild acid / alkali
resistant manufactured using RV TIFAC (R V
Engineering College, Bangalore & Technology
Information Forecasting & Assessment Council)
technology in line with IS 13034 1990 test
Standard in an ISO 9001 – 2015 certified factory.
Accessories:
i i) S. S. Hinges 4” - 3 Nos
ii ii) S. S. Latch - 1 No
iii iii) Tower Bolt 5” - 2 Nos
iv iv) Handle 5” - 2 Nos

Shutter Thickness : a) 30mm sqm 2900.00
: b) 35mm sqm 3279.00
: c) 40mm sqm 3662.00

Note: For 35 & 40mm thickness shutters, only

frames of 5 x 2 ½ Cross section frames to be used.
Wood Finish Foam Core FRP (Fiber Reinforced
Polymer) Door Shutter
Manufacture, Supply and Installation (including
per options below by using tray system, with
7159 wood styles for Top rail and lock rails. FRP (Fiber
grams per sq.mts (gsm) chop strand matt and
of 400/450 centipoises per second (cps) along
with printed matt having wooden textures, used
along with UV Resistant resin to give the clear
wooden texture on the door. The core of shutter
will be filled as specified (Expanded Polystyrene
Foam / Polyurethane Foam (EPS/PU) Foam) The
shutter to be water proof as well as mild acid /
alkali resistant manufactured using RV TIFAC (R V
Engineering College, Bangalore & Technology
Information Forecasting & Assessment Council)
Technology in line with IS 13034 1990 test
Standard in an ISO 9001 – 2015 certified factory.
Accessories:
i i) S. S. Hinges 4” - 3 No
ii ii) S. S. Latch - 1 No
iii iii) Tower Bolt 5” - 2 Nos
iv iv) Handle 5” - 2 Nos

: b) 35mm sqm 3917.00
: c) 40mm sqm 4355.00


Standard Wood Core Door Shutter with Single
Colour
wood styles for Top rail and lock rails. FRP (Fiber
7160 grams per sq.mts (gsm) chop strand matt and
of 400/450 centipoises per second (cps).The core
of Shutter will be filled with MR2nd grade Block
Board. The shutter to be water proof as well as
mild acid / alkali resistant manufactured using RV
TIFAC (R V Engineering College, Bangalore &
Technology Information Forecasting &
Assessment Council) technology in line with IS
13034 1990 test Standard in an ISO 9001 – 2015
certified factory.
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No

iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos

: b) 35mm sqm 4039.00
: c) 40mm sqm 4392.00

Wood Finish Wood Core FRP (Fiber Reinforced
Polymer) Door Shutter

wooden styles for Top rail and lock rails. FRP
(Fiber Reinforced Polymer) laminate made up of
450 grams per sq.mts (gsm) chop strand matt and
7161
of 400/450 centipoises per second (cps) and
printed matt having
wooden textures used along with UV Resistant
resin to give the clear texture on the door. The
core of shutter will be filled with MR 2nd grade
Block Board. The Shutter to be water proof as
well as mild acid / alkali resistant manufactured
using RV TIFAC (R V Engineering College,
Bangalore & Technology Information Forecasting
& Assessment Council) technology in line with IS
13034 1990 test Standard in an ISO 9001 – 2015
certified factory.
Accessories:
i) S. S. Hinges 4” - 3 Nos
ii) S. S. Latch - 1 No
iii) Tower Bolt 5” - 2 Nos
iv) Handle 5” - 2 Nos
: b) 35mm sqm 4734.00
: c) 40mm sqm 5049.00

FRP (Fiber Reinforced Polymer) Frames
Manufacture, Supply and Installation (with anchor
fastener) of EPEE or equivalent Goan make FRP
(Fiber Reinforced Polymer) Frame of cross
section as per options below with right angle joint
and FRP (Fiber Reinforced Polymer) laminate
made from 450 grams per sq.mts (gsm) chop
strand glass fiber (matt) and unsaturated
7162
polyester resin with viscosity range of 400/450
centipoises per second (cps). The core of frame
would be filled with seasoned wood as infill
material. The slot of frame for door resting will be
of suitable width so as to take specified thickness
door.. The frame will be water proof as well as
mild acid/ alkali resistant manufactured in an ISO
9001- 2015 certified company.

Specified Cross Section : a) 3” x 2” Metre 513.00
b) 4” x 2” Metre 739.00
c) 4” x 2 ½ “ Metre 601.00
d) 5” x 2 ½ “ Metre 786.00
FRP (Fiber Reinforced Polymer) Frames with

Wood Finish
Manufacture, Supply and Installation (with anchor
fastener) of EPEE or equivalent Goan make FRP
(Fiber Reinforced Polymer) Frame of cross
section as per options below with right angle joint
and FRP (Fiber Reinforced Polymer) laminate
made from 450 grams per sq.mts (gsm) chop
7163 strand glass fiber (matt) and unsaturated
polyester resin with viscosity range of 400/450
centipoises per second (cps). The core of frame
would be filled with seasoned wood as infill
material. The slot of frame for door resting will be
of suitable width so as to take specified thickness
door. The frame will be water proof as well as
mild acid/ alkali resistant manufactured in an ISO
9001- 2015 certified company.
Specified Cross Section : a) 3” x 2” Metre 595.00

b) 4” x 2” Metre 821.00
c) 4” x 2 ½ “ Metre 683.00
d) 5” x 2 ½ “ Metre 821.00
Providing & fixing Stainless Steel Cylindrical lock
60mm dia with pair of knob, keys etc. with
7164 necessary screws etc. for doors complete as Each 932.00
approved by engineer. Entrance Function:
Internal Push Button & External Key Operation
Providing & fixing Stainless Steel tubular lever D-
Type mortise handles with round/Square nose,
24mm Mortise/sash lock body & Strike plate (all
7165 Each 3889.00
SS Finish), Pin cylinder 60mm with one side key
and other side knob/thumb turn with necessary
screws etc. complete
Providing and fixing Stainless steel D type handles
7166 with necessary screws etc complete Each 1448.00
a) L 300mm/325mm x 22 to 25mm dia
Providing and fixing 1.00mm high pressure
decorative Laminates (glossy/ matt) on wooden
surfaces like doors, windows. The laminate should
comprise of layers of specially selected paper,
impregnated with melamine and phenolic resins
7167 sq.m. 864.00
pressed and hardened under heat and high
pressure and should ensure strong bonding,
resistance to boiling water and chemical and
increase dimensional stablilty. Including cost of
adhesive, nails during fixing etc. complete
Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I)
decorative type (BWP), core of block board
construction with frame of 1 st class hard wood
and well matched teak 3 ply veneering with
7168 vertical grains or cross bands and face veneers on
both faces of shutters.
35 mm thick including ISI marked Stainless Steel
a sq.m. 4307.00
butt hinges with necessary screws
b sq.m. 4008.00
shutters conforming to IS : 2202 (Part I) semi-
construction with frame of 1 st class hard wood
7169 and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on
One face of shutters & well matched commercial 3
ply veneering with vertical grains or cross bands
and face veneers on Other face of shutters
a sq.m. 2766.00
b sq.m. 2766.00
shutters conforming to IS : 2202 (Part I) non-
7170 construction with frame of 1 st class hard wood
and well matched commercial 3 ply veneering
with vertical grains or cross bands and face
veneers on both faces of shutters:
a sq.m. 2414.00
b sq.m. 2263.00
UPVC ONLY DOOR FRAME:-
Providing & fixing Upvc Door Frame Yashashri
make or equivalent made out of Upvc extruded
multi cavity frame of 60 mm x 60mm x 2mm wall
7171
thickness. Frame is reinforced with G.I. Channel & Metre 476.00
welded in corners with Average weight 0.80 kg
per running mtr. These frames are tested by using
BS 2782 & DIN 53459 test methods.
20 MM DOOR SHUTTER:-
Providing & fixing 20 mm door shutter Yashashri
make or equivalent, made by using 20mm x
155mm x 1.2mm upvc multi-cavity section and
boarder of 30mm x 40mm x 2.5mm Upvc multi
cavity section. The corners are joined by inserting
7172
polymetric corners & hardware used for fixing the sq.m. 1957.00
door shutter is stainless steel hinges & S. S. handle
& S.S. tower bolt. The average weight of 20mm
door shutter is 4.60kg per sq mtr. These Upvc
sections are tested by using BS 2782 & DIN 53459
test methods.
32 MM DOOR SHUTTER:-
Providing & fixing 32mm door shutter Yashashri
make or equivalent, made by using 31mm x 150
mm x 1.5mm upvc multi-cavity section having
Toung & Groove jointing method and boarder
having 35mm x 30mm x multi- cavity section. The
7173
corners are joined by inserting polymetric corners sq.m. 3029.00
& hardware used for fixing the door shutter is
stainless steel hinges & S. S. handle & S.S. tower
bolt. The average weight of 32mm door shutter is
6.30 kg per sq mtr. These Upvc sections are tested
by using BS 2782 & DIN 53459 test methods.
TURNWINDOWS:-
Providing & fixing Single or multi shutter turn
windows Yashashri make or equivalent, made out
of upvc multi- cavity frames Sections of 60mm x
60mm x 2.5mm reinforced with G.I channel and
double multi-shutters Division are made by using
shash mullion having 50mm x 64mm x 2.5mm
multi- cavity upvc section, reinforced with G.I.
7174 channel and shutters are made out of 50mm x
sq.m. 9385.00
64mm x 2.5mm upvc section, Reinforced and
welded in corners with EPDM Gaskets and using
suitable glass bead with perfect hardware like
hinges, handles, stays & 4mm clear Glass. Some
portion of windows can be made fixed glass. The
average weight of Turn window is 11.5 kg per sq
mtr. These Upvc sections are tested by using BS
2782 & DIN 53459 test methods.
THREE TRACK SLIDING WINDOWS:-
Providing & fixing Three track Sliding Windows

Yashashri make or equivalent, made out of 97mm
x 43mm x 2mm upvc multi-cavity reinforced with
G.I. channel and having up word projection for
sliding of shutter on Nylon Rollers and having
slope for draining rain water outside and welded
in corners. Shutters are made out of 57mm x
7175
31mm x 2mm multi-cavity section having sq.m. 7170.00
provision for nylon rollers fixing, glass fixing with
EPDM gasket, glass bead and welded in corners. In
Three Track Sliding window 4mm clear glass is
used. The average weight of Three Track Sliding
window is 16.5 kg per sq mtr. These Upvc sections
are tested by using BS 2782 & DIN 53459 test
methods.
TWO TRACK SLIDING WINDOW (Economical):-
Providing & fixing Two Track sliding window in
economical section made out of 60mm x 45mm x
2.5mm Upvc multi cavity track section & Shutter
made out of 57mm x 31mm x2.5mm Upvc multi
7176 cavity section welded in corners with Glass
sq.m. 6160.00
beading & EPDM Gasket & 4mm clear glass with
lock & rollers. The average weight of Two Track
Sliding window (Economical) is 12.25 kg per sq
mtr. These Upvc sections are tested by using BS
2782 & DIN 53459 test methods.
TWO TRACK SLIDING WINDOW (Heavy):-
Providing & fixing Two Track sliding window

Yashashri make or equivalent, in heavy sections
made out of 104mm x 51 mm x 2.5 mm Upvc multi
cavity track section & shutter made out of 45mm
x54mm x 2.5mm Upvc multi cavity section
7177
welded in corners with Glass beading & EPDM sq.m. 7372.00
Gasket & 4mm clear glass with lock & rollers. The
average weight of Two Track Sliding window
(Heavy) is 16.75 kg per sq mtr. These Upvc
sections are tested by using BS 2782 & DIN 53459
test methods.
PARTITION:-
Providing & fixing Partitions Yashashri make or

equivalent, made out of frame support structure
in 2” x 1” M.S. sq tube & walls paneled by 20mm x
155mm x 1.2mm Upvc multi cavity section fixed
on structure with hidden screwing system. Door
7178 frame & shutter made out of 50mm x 50mm x
sq.m. 5555.00
2.5mm & 31mm x 150mm x 1.5mm Upvc multi
cavity section. Some portion of partition can be
made by 4mm fixed glass. The average weight of
Partition is 17 kg per sq mtr. These Upvc sections
are tested by using BS 2782 & DIN 53459 test
methods
PORTA CABINS: -
Providing & fixing UPVC Porta Cabin Yashashri
make or equivalent, made out of frame support
structure in 2” x 1”M.S. square tube welded as per
designs suitable for transportation, assembling /
dissemble nut bolt systems & painted . Walls are
made out of UPVC extruded multi cavity panels of
20mm x 116mm x 1.2mm fixed on structure with
7179 hidden screwing system. Door frame is made out
sq.m. 2589.00
of 50mm x 50mm x 2.5mm. Multi cavity UPVC
frame reinforced suitably & shutter made out of
31mm x 150mm x 2mm. upvc 2 track windows
with 4 mm glass. Roof is made out 0.5 Gauge G.I.
pre coated corrugated Sheet along with 20mm
Upvc False Ceiling at 8’ Height. The side height of
Porta Cabin is 8’ & center height of Porta cabin is
9.5’ approximate.
FALSE CEILING:-
Providing & fixing False Ceiling Yashashri make or
equivalent, made out of 2” x 1” M.S sq tube frame
support structure & 20mm x 155mm x 1.2mm
7180 multi-cavity upvc section, 30mm x 40mm x 2mm
sq.m. 2276.00
Upvc multi-cavity section with hidden screwing
system. The average weight of False Ceiling is 8.50
kg per sq mtr. These Upvc sections are tested by
using BS 2782 & DIN 53459 test methods.
CHAPTER XI
STEEL AND ALUMINIUM WORK
SR.
NO
Steel work in single sections (SAIL, TATA. VIZAG
& using electrodes of Ador or ES4B or Deh
Secheron make only) including cutting, hoisting
fixing in position and applying a priming coat of
8001 red lead paint.
a In R.S. joists, channels, angles, tees qtl 13711.00
b In flats of all sizes qtl 12132.00
c In flats exceeding 100mm thickness qtl 12132.00
Steel work(SAIL, TATA. VIZAG only) riveted or
bolted in built up sections, trusses and framed

work including cutting, hoisting, fixing in position
8002 and applying a priming coat of red lead paint.
a In R.S. joists qtl 10620.00
b In tees, angles, flats and channels qtl 11052.00
Steel work welded (SAIL, TATA. VIZAG & using

electrodes of Ador or ES4B or Deh Secheron make
only)in built up sections trusses and framed work
8003 including cutting, hoisting, fixing in position and
applying priming coat of red lead paint.
a In R.S. Joists qtl 13658.00

b In tees, angles, flats and channels qtl 13023.00
Providing and fixing in position collapsible steel
shutters with vertical channels 20 mm x 10 mm x
2 mm and braced with flat iron diagonals 20mm x
5mm size with top and bottom rails of T-iron, 40 x
8004 sq.m 6356.00
40 x 6 mm with 38 mm dia. Steel pullys
completely bolts locking arrangement, stopper,
handles including applying a priming coat of red
lead paint.
Providing and fixing 1 mm thick M.S. sheet sliding
shutters with frame & diagonal braced of 40 mm x
40 mm x 6 mm angle iron, 3.15 mm M.S. gusset
8005 plates at junctions and corners, 25 mm dia pulley sq.m 4753.00
40 mm x 40 mm x 6 mm angle and T-iron guide at
top and bottom respectively including applying a
priming coat of lead paint.
Providing and fixing 1 mm thick M.S. sheet garage
door with frame of 40 x 40 x 6 mm angle iron 3.15
mm M.S. gusset plate at the junction and corners,
all necessary fitting complete including applying a
8006 priming coat of red lead paint.
Using M.S. angles 40 mm x 40 mm x 6 mm for
a sq.m 4029.00
diagonal braces.
Using M.S. Flats 30 mm x 6 mm for diagonals
b sq.m 4077.00
braces and central cross
Supplying and fixing rolling shutters of approved
make, made of 80 x 1.25 mm M.S. laths
interlocked together through their entire length
and jointed together at the end by end locks
mounted on specially designed pipe shaft with
8007 brackets, side guides and arrangements for inside sq.m 2895.00
and outside locking with push and pull operation
complete including the cost of providing and
fixing necessary 27.5cm long wire springs grade
No.2 and M.S. top cover of 1.25mm thick for
folling shutterstop cover and spring.
Providing and fixing 27.5cm long wire spring
8008 Each 979.00
grade No.2 for rolling shutters.
8009 Providing and fixing top cover for rolling shutters Metre 815.00
Providing and fixing Ball bearings for rolling

8010 Each 657.00
shutters
Extra for providing mechanical device, chain and

crank operation for operating rolling shutters.
Exceeding 10.00 sq.m. and upto 16.80 sq.m. in
8011 a sq.m 2182.00
area
Exceeding 16.80 sq.m. in area Chain & overhead
b sq.m 2417.00
operation
Fixing standard steel or aluminum glazed doors
windows and ventilators in wall with lugs 10 cm x
16mm x 3.15 mm embed in C.C. block 15 x 10 x
10 cm size of 1:3:6 (1 cement : 3 coarse sand, 6
aggregate 20 mm nominal size) or with wooden
8012 plugs or with rawl plugs & screws or with fixing sq.m 470.00
clips or with nuts as required including fixing of
glass panes with glazing clips and special metal
sash pulley of approved make or metal bearing
with screws shall be supplied by department free
of cost.
Providing and fixing steel glazed doors windows
and ventilators of standard rolled steel sections,
joints mitred and welded with 16 x 3.15 cm lugs
10 cm long embedded in cement concrete block
15cm x 10 cm size of 1:3:6 (1 cement: 3 coarse
sand 6 graded stone aggregate 20 mm nominal
size) or with wooden plugs and screws of raw
plugs and screws for with fixing clamps or with
bolts and nuts as required, including providing
and fixing of glass panes with glazing clips and
8013 special metal sash putty of approved made on
metal beading with screws complete including
applying a priming coat of red lead paint.
a Steel door (Fixed doors) sq.m 2467.00
b Steel doors (Single leaf door) sq.m 3306.00
c Steel door (Double leaf door) sq.m 3412.00
d Fixed steel windows sq.m 2379.00
e Side hung windows sq.m 2372.00
f Top hung ventilators sq.m 2188.00
g Centre hung ventilators sq.m 2306.00
Providing and fixing cast brass peg stay 300 mm
8014 Each 256.00
long for steel window ventilators etc.
Providing & fixing cast brass casement window
8015 Each 119.00
fastener 125 mm long.
Providing and fixing M.S. fan clamp type 1or II of
16 mm dia M.S. bar bent to shape with hooke ends
8016 in R.C.C. slabs, beams during laying including Each 211.00
painting the exposed portion of loop, all as per
standard design complete.
Extra rate for providing and fixing M.S. fan clamp
type 2 as per standard design in R.C.C. beams
8017 Metre 422.00
during laying towards the additional height of the
clamps due to beam rib.
Providing & fixing M.S. round holding down with
8018 qtl 13963.00
nuts & Washer plates complete.
Providing & fixing bolts with nuts & washer
8019 qtl 30585.00
complete.
8020 Providing & fixing M.S. Rivets of sizes in position. qtl 30151.00
Welding by gas plant (using Ador or ES4B or Deh
8021 cm 16.00
Secheron make electrodes only)
Welding by electric plant (using Ador or ES4B or
8022 cm 12.00
Deh Secheron make electrodes only )
Providing and fixing in position 2nd class Indian
teak wood hand rail 6.4 x 11.5 cm (4.5" x 2.5")
fixed to 40 x 3 mm size M.S. flat welded to 10 mm
8023 mild steel square balusters of clear height 86 cm Metre 2099.00
spaced at 15 cm c/c including making necessary
hold fast fixtures embeded in staircase concrete
to the depth of 20 cm6 as per detailed drawings.
Providing & fixing in position hand rails in
staircase, landing and the like with 2" dia G.I. pipe
(light class) resting on 25 mm (1") size M.S.
square bars of clear height 90cms placed at 30 cm
c/c including making necessary hold fast fixture
(25 mm square bars 22 cm long) embeded in
8024 Metre 1872.00
staircase concrete for resting the M.S. vertical
square bars with holding etc. as required for the
work including bending hand rail pipe to proper
shape in curves with specials etc. complete
(measurement will be made along the running
length of hand rail).
Providing and fixing in position hand rail in
balconies, landings and the like with 2" dia G.I.
pipe (light class) resting on 20 x 20mm M.S.
square bars of clear height making necessary
8025 holdfast fixture (20mm square bars 15 cms long) Metre 863.00
embedded in balcony concrete for resting the M.S.
vertical square bars with holding etc as required
(measurements will be made along the length of
the hand rail)
Providing and fixing in position G.I. hand rail
polyster powder coated in external passage, as
8026 per approved design shown in drawing including Metre 2744.00
bending hand rail pipe to proper shape in curves
with special etc. complete.
Providing and fixing in position S.S. hand rail in
main stair case, and landing as per approved
8027 design shown in the drawing including bending Metre 4969.00
handrail pipe to proper shape in curves with
specials, etc. complete.
Providing and fixing steel pressed frames
confirming to IS 4351/1976 in doors / windows

including providing necessary arrangement for
8028 fixing hinges etc. complete.
a Size 125 x 60 mm Metre 484.00
b Size 105 x 60 mm Metre 447.00
c Size 85 x 60 mm Metre 446.00
Proving and fixing anodised alluminium shutters
in accordance with the specification annexed with
Goa schedule of Rates (2004) Vol & II including all
taxes, transportation, scaffolding and handling etc.
complete as per direction of the Engineer-in-
8029 charge: Window with two or three sliding shutters
using 14.5/15 mm series shutters section.
a Acrylic sheet sq.m 4842.00
b Plain glass sq.m 3766.00
c Figured glass sq.m 3766.00
Providing and fixing anodized aluminium shutters
8030 charge: windows with two sliding shutters using
18 mm series shutters section.
8031 windows with two sliding shutters 20 mm sq.m 3766.00
sections and 5 mm clear float glass.
8032 charge: windows with three sliding shutters using
8033 windows with two sliding shutters 20 mm sq.m 3766.00
sections and 5 mm clear float glass.
8034
charge: Openable windows and ventilators using

8035 complete as per direction of the Engineer-in-
charge: Adjustable louvered windows.
8036 charge: Fixed windows/ ventilators matching
with 4.5 mm series shutters.
8037 charge: Fixed windows/ ventilators matching
with 18 mm series shutters.


charge: Curved fixed windows.


charge: Single or double leaf door shutters.
b Plain plate glass sq.m 3390.00
Providing and fixing anodised aluminium single or
8040 double leaf door shutters with heavy sections as sq.m 4842.00
specified.

charge: Fixed partitions
b Plain plate glass sq.m 3009.00
Extra for powder coating with pure polyester
8042 powder of shade of required colour on the sq.m 215.00
aluminium section
Providing & fixing frictional stay hinges of reputed
make WINDFIX, GRAVICLOSE company or
8043 pair 429.00
equivalent complete with chromium plated brass
screws as required.
Providing and fixing hydraulic floor spring of
reputed make Everrite, prabhat or equivalent as
8044 per the manufacturer's as specification having Each 4040.00
double action spring as approved by the Engineer-
in-charge.
Providing and fixing aluminium stay adjustor 250
8045 mm long with minimum three holds self threading Each 126.00
galvanized MS screws.
Providing and fixing in position hand rail in
staircase, landings and the like with 2" dia G.I.
pipe (light class) resting on 50 x 50mm M.S.
square bars of clear height 40cms placed at 50cm
including making necessary holdfast fixtures
8046 (30mm square bars 22 cms long) embedded in Metre 1164.00
staircase concrete for restting the M.S. vertical
square bars with holding etc as required including
bending the G.I. pipe to necessary shape in curves
with specials etc. (Measurements will be made
along the length of the hand rail)
Providing and fixing of aluminium windows with

three tracks and three shutters sliding windows
with tubular frame sections powder coated with
8047 pure polyster powder of thickness 15-80 microns sq.m 5600.00
with approved standard acessories such as ball
bearing rollers concealed lock, 6mm plain clear
glass with EPDM beading etc.
Providing and fixing of aluminium window with 3

tracks and 2 shutters sliding window with tobular
frame ployster powder if thicness 75-80 microns
8048 sq.m 2971.00
with approved standard accessaries such as ball
beaing rollers, concealed lock, 6mm thick plain
clear glass with EPDM beading etc.
Providing and laying of aluminium fixed with
65mm x 38mm tubular frame with 6mm thick
glass sections are powder coated with pure
8049 sq.m 4300.00
ployster powder of thickness 75-80 microns with
approved standard accessories. The glass would
be fixed with taper clips with EPDM beading
Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) (Square Hollow
Section (SHS) IS4923 /Rectangular Hollow
Section (RHS) IS4923/ Circular Hollow Section
(CHS) IS1161 closed Structural Steel of (SAIL,
8050 TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min kg 184.00
Yeild Stress 310 Mpa)) trusses etc., including
cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer, including
welding and bolted with special shaped washers
etc. complete.
Providing and fixing stainless steel (Grade 304)
railing made of Hollow tubes, channels, plates
etc.with hairline finish, including welding,
grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete,
i/c fixing the railing with necessary accessories &
8051 kg 670.00
stainless steel dash fasteners, stainless steel bolts
etc., of required size, on the top of the floor or the
side of waist slab with suitable arrangement as
per approval of Engineer, ( for payment purpose
only weight of stainless steel members shall be
considered excluding fixing accessories such as
nuts, bolts, fasteners etc.).
Supply and installation of Aluminium Louvers.
The frame should be made of Aluminium tubes of
size 100x50X1.50 mm thk and 50X25x1.50 mm
thk C channels. Aluminium Z shaped louvers of
8052 100mm should be fixed to the supporting frame sq.m. 3545.00
with aluminium cleats, GI screws, etc complete.
The whole assembly is powder coated with pure
polyester paint. (MS framing to be paid
separately)
Design, supply & installation of suspended Spider
Glazing system (Frameless glass structural
glazing) designed to withstand the wind pressure
as pr IS 875 (Part-III). The Suspended System held
with Spider Fittings of SS-316 Grade Steel of
approved manufacturer with glass panel having
12 mm thick clear toughened glass held together
with SS- 316 Grade Stainless steel Spider & bolt
assembly with laminated glass fins 21mm thick.
The Glass fins and glass panel assembly shall be
connected to Slab/beams by means of SS- 316
Grade stainless steel brackets & Anchor bolts and
8053 at the bottom using SS channel of 50x25x2mm sq.m. 12357.00
using fastener & anchor bolts, non staining
weather sealants of approved make, Teflon/ nylon
bushes and separators to prevent bi-metallic
contacts, all complete to perform as per
specification and approved drawings. The
complete system to be designed to accommodate
thermal expansion & seismic movements etc. The
joints between glass panels (6 to 8 mm) and gaps
at the perimeter & in U channel of the assembly to
be filled with non staining weather sealant, so as
to make the entire system fully water proof & dust
proof. The rate shall include all design,
Engineering and shop drawing including approval
from structural designer, labour, T&P, scaffolding ,
other incidental charges including wastage,
enabling temporary services all fitting fixers nut
bolts, washer, Buffer plates, fastener, anchors, SS
channel laminated glass etc. all complete. For the
purpose of payment, actual elevation area of
Glazing including thickness of joints and the
portion of Glass panel inside the SS channel shall
be measured.
Extra over design, supply and installation of
Spider glazing system, for provision of 12mm thk
clear toughened glass door shutter fittings
including the cost of top & bottom patch fitting,
over panel patch, panel connector pivot, over
panel/sidepanel connector with pivot, bottom
8054 sq.m. 9873.00
lock, stainless steel hardware fittings of 316
grade for operating door i.e. door handle 450mm
Lg, floor spring of approved make and locking
arrangement etc. complete including the cost of
cutting the floor and making good the same, as per
design and drawing all complete as required.
Providing and fixing 12 mm thick frameless

toughened glass door shutter of approved brand
and manufacture, including providing and fixing
top & bottom pivot & spring type fixing
8055 sq.m. 12736.00
arrangement and making necessary holes etc. for
fixing required door fittings, all complete as per
direction of Engineer (Door handle, lock and
stopper etc.to be paid separately)
Providing & fixing in position fixed glass for

shower partition with 10mm toughened clear
8056 sq.m. 6525.00
glass on patch fittings in SS 316 grade,
Reinforcement bar, silicone sealant Complete.
Providing and supplying aluminium extruded
tubular and other aluminium sections as per the
architectural drawings and approved shop
drawings , the aluminium quality as per grade
6063 T5 or T6 as per BS 1474,including super
durable powder coating of 60-80 microns
8057 kg 460.00
conforming to AAMA 2604 of required colour and
shade as approved by the Engineer. (The item
includes cost of material such as cleats, sleeves,
screws etc. necessary for fabrication of extruded
aluminium frame work. Nothing extra shall be
paid on this account).
Providing and fixing double action hydraulic floor
spring of approved brand and manufacture
conforming to IS : 6315, having brand logo
embossed on the body / plate with double spring
mechanism and door weight 120-150 kg for
doors, including cost of cutting floors, embedding
8058 Each 9490.00
in floors as required and making good the same
matching to the existing floor finishing and cover
plates with brass pivot and single piece M.S. sheet
outer box with slide plate etc. complete as per the
direction of Engineer. a) With stainless steel cover
plate minimum 1.25 mm thickness
8059 Supply & Fixing of Aluminium Plain Exterior sq.m. 2593.00
Ventilated Facade of approved colour consisting
of liniar roll formed panel 84 mm wide x 16 mm
deep x 0.6 mm thick with round edges panel
length upto 6 meter coil coated on a continuous
paint line double baked and roll formed from
enameled corrosion Resistance Aluminum Alloy
AA3005 / AA3003 (Al.Mn.) for higher strength
and good Roll forming characteristics. Panels shall
be clipped at a distance of 146mm with a gap of
62mm between two panels to baked enameled
Aluminium panel stringer 33mm wide and 48mm
deep x 0.95 mm thick in a standard length of
5mtrs made of double baked enameled
Aluminium Alloy AA5050 (Al.Mg.) white to hold
the panel in a module of 86mm centre to centre.
The prongs on stringers shall be to accommodate
a gap of 62 mm between two panels as per
enclosed profile details. stringers shall be fixed at
150 mm from panel ends and at a distance of less
than 1000 mm center to center across the panel
span based on the wind load criteria. The Stringer
shall be fixed to a suitable structure (other’s
scope) by means of rigid fixing details. All
properties and specifications shall comply with
ECCA directives and more specifically EN
1396:1996.
Paint Finish: Panel shall be stove enamelled and
finished with standard color Natural TF Silver
(7080) or Pure White (0260) or any other colour
max. 10% quantity, a special three layered coating
system (consisting of first a conversion layer of
thickness 800-2000mg/sqmtr, a polyurethane
basecoat of 16-20 microns, and a special top coat
of polyamide particles of 8-12 microns thick to
provide excellent abrasion and damage
resistance) in a continuous coil coating process of
the approved colour on the exposed side and the
reverse side with epoxy. Complete including Wall,
corner profiles as per manufacturers’
specifications etc. (MS Substructure to be paid
separately, Rate to include all ridge, eaves, valley
& joints flashing, verge & junction trims, facia, etc.
of similar finish, making cut-outs for light fittings,
diffusers, columns, etc. as required, complete as
per approved shop drawings and as directed/
approved by Engineer.)
Designing, fabricating, testing, installing and fixing

in position Curtain Wall with Aluminium
Composite Panel Cladding, with open grooves for
linear as well as curvilinear portions of the
building , for all heights and all levels etc.
including: a) Structural analysis & design and
preparation of shop drawings for pressure
equalisation or rain screen principle as required,
proper drainage of water to make it watertight
including checking of all the structural and
functional design. b) Providing, fabricating and
supplying and fixing panels of aluminium
composite panel cladding in pan shape in metalic
8060 colour of approved shades made out of 4mm thick sq.m. 3717.00
aluminium composite panel material consisting of
3mm thick FR grade mineral core sandwiched
between two Aluminium sheets (each 0.5mm
thick). The aluminium composite panel cladding
sheet shall be coil coated, with Kynar 500 based
PVDF / Lumiflon based fluoropolymer resin
coating of approved colour and shade on face # 1
and polymer (Service) coating on face # 2 as
specified using stainless steel screws, nuts, bolts,
washers, cleats, weather silicone sealant, backer
rods etc.
c) The fastening brackets of Aluminium alloy 6005

T5 / MS with Hot Dip Galvanised with serrations
and serrated washers to arrest the wind load
movement, fasteners, SS 316 Pins and anchor
bolts of approved make in SS 316, Nylon
separators to prevent bi-metallic contacts all
complete required to perform as per specification
and drawing The item includes cost of all
material & labour component, the cost of all mock
ups at site, cost of all samples of the individual
components for testing in an approved laboratory,
field tests on the assembled working curtain wall
with aluminium composite panel cladding,
cleaning and protection of the curtain wall with
aluminium composite panel cladding till the
handing over of the building for occupation. Base
frame work for ACP cladding is payable under the
relevant aluminium items. The Contractor shall
provide curtain wall with aluminium composite
panel cladding, having all the performance
characteristics all complete , as per the
Architectural drawings, as per item description, as
specified, as per the approved shop drawings and
as directed by the Engineer. However, for the
purpose of payment, only the actual area on the
external face of the curtain wall with Aluminum
Composite Panel Cladding (including width of
groove) shall be measured in sqm. up to two
decimal places.
Providing and fixing carbon steel galvanised
(minimum coating 5 micron) dash fastner of 10
mm dia double threaded 6.8 grade (yield strength
8061 480 N/mm2), counter sunk head, comprising of
10 m dia polyamide PA6 grade sleeve, including
drilling of hole in frame, concrete/ masonry, etc.
as per direction of Engineer.
a 10 x 60 mm. Each 75.00
b b) 10 x 80mm Each 76.00
c c) 10 x 120mm Each 96.00
d d) 10 x 140mm Each 98.00
e e) 10 x 160mm Each 131.00
CHAPTER XII
FLOORING AND FLOOR FINISHES
SR.
NO
First class brick flooring in cement mortar 1:4 (1
9001 sq.m 939.00
First class brick flooring in cement mortar 1:6 (1
9002 sq.m 910.00
Second class dry brick flooring including filling
9003 sq.m 791.00
joints with fine sand.
25 mm cement concrete flooring 1:2:4 (1 cement:
2 coarse sand: 4 graded stone aggregate 12.5 mm
9004 sq.m 309.00
nominal size) finished with a floating coat of neat
cement.
Cement concrete flooring 1:2:4 (1 cement: 2
coarse sand: 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat
9005 cement.
a 40 mm thick sq.m 417.00
b 50 mm thick sq.m 741.00
c 75 mm thick sq.m 636.00
40 mm. thick red oxide flooring under layer of 30
mm thick cement concrete 1:2:4 (1 cement: 2
coarse sand: 4 graded stone aggregate 12.5mm
nominal size) and top layer of 10 mm thick plaster
9006 sq.m 962.00
of cement red oxide mix using 3.5 kg. Of red oxide
of iron per 50 kg. of cement 1:3(1cement : 3
coarse sand) finished with floating coat of neat
cement red oxide mix of same proportion.
Add or deduct for using more or less than 3.5 kg of
9007 redoxide of iron per 50 kg. Cement in 40 mm thick sq.m 42.00
red oxide flooring.
Cement concrete pavement (25 mm to 50 mm
thick) with 1:2:4 (1 cement: 2 coarse sand: 4
9008 graded stone aggregate 20 mm nominal size) cu.m 8292.00
including finishing complete *: per extra kg. of
redoxide used for each 50 kg of cement.
Extra for making chequeres of approved pattern
9009 on cement concrete floor, steps, landings sq.m 41.00
pavements etc.
52mm thick cement concrete flooring with
metallic concrete hardener topping, under layer of
40 mm thick cement concrete 1:2:4 (1 cement: 2
coarse sand: 4 graded stone aggregate 20 mm
nominal size) and top layers 12 mm thick metallic
cement hardener constituting of mix 1:2 (1
9010 sq.m 602.00
cement: 2 graded stone aggregate 6 mm nominal
size by volume with which metallic quality is
mixed in ratio 4:1 (4 parts of cement: 1 part of
metallic) hardening compound of approved floor
hardening compound of approved quality) by
weight, including finishing complete.
Cement plaster skirting upto 30 cm height with
cement mortar 1:3 (1 cement: 3 coarse sand)

finished with a floating coat of neat cement
9011 including of rounding of junction with floor
a 18 mm thick sq.m 150.00
b 21 mm thick sq.m 387.00
Red oxide plaster skirting (upto 30 cm height)
with top layer of 6 mm thick plaster of cement mix
using 3.5 kg of red oxide of iron per 50 kg of

cement in mortar 1:3 (1 cement: 3 coarse sand)
finished with a floating coat of cement red oxide
9012 mix of same proportion.
18 mm thick with under layer 12 mm thick
a sq.m 464.00
cement plaster 1:3 (1 cement: 3 coarse sand)
21 mm thick with under layer 12 mm thick
b sq.m 484.00
cement plaster 1:3 (1 cement: 3 coarse sand)
Add or deduct for using more or less 3.5 kg of red

oxide of iron per 50 kg of cement in 18 mm or 21
9013 sq.m 14.00
mm thick red oxide plaster skirting. *: Per extra
kg. of red oxide used for each 50 kg of cement.
40 mm. thick marble chips flooring rubbed and

polished to granolithic finish under layer 34 mm
thick cement concrete 1:2:4 (1 cement: 2 coarse
sand: 4 graded basaltic or ganitic stone aggregate
12.5 mm nominal size) and top layer 6 mm thick
white black or white and black marble chips of
9014 sizes from 1MM to 4 mm nominal size laid in
cement marble powder mix 3:1 (3 cement: 1
marble powder by weight in proportion of 4:7 (4
cement marble powder mix: 7 marble chips by
volume).
a Dark shade pigment with ordinary cement sq.m 697.00
b Light shade pigment with white cement sq.m 750.00
Medium shade pigment with approximately 50%
c sq.m 726.00
white cement & 50% ordinary cement.
d) White cement without any pigment sq.m 1196.00
e Light shade pigment with ordinary cement sq.m 1210.00
thick cement concrete 1:2:4 (1 cement : 2 coarse
sand: 4 graded basaltic or ganitic stone aggregate

white black or white and black marble chips of
sizes 4 to 7 mm nominal size laid in cement
marble powder mix 3:1 (3 cement: 1 marble
9015 powder by weight in proportion of 4:7 (4 cement
marble powder mix : 7 marble chips by volume).
c sq.m 854.00
d White cement without any pigment sq.m 758.00
thick cement concrete 1:2:4 (1 cement : 2 coarse
sand: 4 graded basaltic or granitic stone aggregate

with black or white and black marble chips of
sizes 7 to 10 mm nominal size laid in cement
marble powder mix 3:1 (3 cement: 1 marble
9016 powder by weight in proportion of 2:3 (2 cement
marble powder mix : 3 marble chips by volume).
c sq.m 1415.00
Marble chips skirting (upto 30 cm height) rubbed
and polished to granolithic finish top layer 6 mm
thick with white black or white and black marble
chips of sizes from smallest to 40 mm nominal
size laid in cement marble powder mix 3: (3
9017
cement : 1 marble powder ) by weight in
proportion of 4 : 7 (4 cement marble powder mix :
7 marble chips ) by volume 18 mm thick under
layer 12 mm thick cement plaster 1:3 (1 cement)
3 coarse sand)
c sq.m 851.00
Extra for providing & fixing aluminium strips 40
9018 mm wide x 1.16 mm thick in joints of terrazo Metre 79.00
floor.
Extra for laying terrazo flooring in borders,
9019 margins & similar band not exceeding 30 cm in sq.m 30.00
width.
Extra for laying terrazo flooring on staircase
9020 treads not exceeding 30 cm in width including the sq.m 44.00
cost of forming nosing etc.
Extra for laying terrazo in narrow band not
9021 sq.m 62.00
exceeding 7.5 cm width.
Precast terrazo tiles 20 mm thick with white,
black or white and black marble chips of size upto
6 mm laid in floors, thread of steps & landings 25
mm thick bed of lime mortar 1: 4 (1 cement : 4

coarse sand jointed with neat cement slurry
mixed with pigment to match the shade of the
9022 tiles incl. Rubbing & polishing completed with
precast tiles of .
a Light shade using white cement sq.m 1048.00
Medium shades using approximately 50%
b sq.m 1032.00
ordinary cement.
c Dark shade using ordinary cement. sq.m 1017.00
d Dark shade using ordinary cement with pigment sq.m 1020.00
Precast terrazo tiles 20 mm thick with white,
black or white and black marble chips of size upto
6 mm laid in floors, thread of steps & landings 25
mm thick bed of lime mortar 1: 2 (1 lime putty : 2

surkhi ) jointed with neat cement slurry mixed
with pigment to match the shade of the tiles incl.
9023 Rubbing & polishing complete with precast tiles
of.
b Light shade using pigment sq.m 937.00
Extra if terrazo tiles are laid in treads of steps not
9024 sq.m 53.00
exceeding 20 cm in width.
Precast terrazo tiles 20 mm thick with marble
chips of sizes upto 6 mm in skirting & risers of
steps not exceeding 30 cm in height on 12 mm
thick cement plaster 1:3 (1 cement : 3 coarse
sand) jointed with neat cement slurry including
9025 rubbing and polishing completed with precast
tiles of
d Dark shade using pigment sq.m 1383.00
Precast terrazo tiles 20 mm thick with marble
chips of sizes upto 6 mm fixed on walls of 12 mm
bed of cement plaster 1:3 (1 cement : 3 coarse

sand) jointed with neat cement slurry including
rubbing and polishing completed with precast
9026 tiles of :
Extra if cut tiles other than half tiles are used in
9027 risers of steps skirting and dado in risers of sq.m 1763.00
steps, skirting and dado.
Chequered terrazo tiles 22 mm thick with marble
chips of sizes upto 6 mm in floor on 25 mm thick
bed of lime mortar 1:1:1 (1 lime putty : 1 surkhi :

1 coarse sand ) jointed with neat cement slurry
9028 mixed with pigment to match the shade of tiles
including rubbing and polishing completed.
Chequered terrazo tiles 22 mm thick with marble
chips of sizes upto 6 mm in floor on 25 mm thick
bed of lime mortar 1:2 (1 lime putty : 2 coarse

sand ) jointed with neat cement slurry mixed
with pigment to match the shade of tiles including
9029 rubbing and polishing completed.
Precast plain cement chequered tiles 22 mm thick
of required shades laid in floors, treads of steps
and landing on 20 mm thick bed of Cement mortar
1:4 (1cement : 4 coarse sand) jointed with neat
cement slurry mixed with pigment to match the
shade of tiles including rubbing and cleaning etc.
9030 complete.
Medium shade using pigment with 50% white
b sq.m 1286.00
cement 50% Grey cement
c Dark shades using ordinary cement sq.m 1231.00
d Dark shades without any pigment sq.m 1157.00
Precast plain cement chequered tiles 22 mm thick
laid in floors teads of steps and landing on 25 mm
9031 thick bed of lime mortar 1:1:1 (1 lime :1 surkhi: 1 sq.m 1193.00
coarse sand) jointed with neat cement slurry
including rubbing and polishing complete.
Precast plain cement tiles 20 mm thick fixed on
walls, on 12 mm bed of cement plaster 1:3 (1
9032 sq.m 1412.00
cement : 3 coarse sand) jointed with neat cement
slurry including rubbing and polishing complete.
Providing and fixing precast terrazo, chequered or
plain tiles of any shades with grooves in the
nosing in treads of steps on 25 mm thick bed of
9033 lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sq.m 1352.00
sand) jointed with neat cement slurry mixed with
pigment to match the shades of tiles including
rubbing and polishing complete.
White glazed tiles 6 mm thick in flooring treads of
steps & landings laid on a bed of 12 mm thick
9034 sq.m 1303.00
finished with flush pointing in white cement.
Extra for laying white glazed tiles in treads of
9035 sq.m 151.00
steps not exceeding 30 mm in width.
White glazed tiles 6 mm thick in skirting, risers of
steps & dado on 12 mm thick cement plaster 1:3
9036 sq.m 1439.00
(1 cement : 3 coarse sand and jointed with white
cement slurry.
Extra for laying white glazed tiles in skirting,
risers of steps, and dado where they are required
9037 sq.m 176.00
to be cut (only area of portion of cut tiles to be
measured).
Providing and fixing 50 mm internal or external
9038 Metre 94.00
angles of glazed tiles.
Marble stone slab flooring over :
20 mm (average) thick base of lime mortar 1:1:1
(1 lime Putty: 1 surkhi:1 coarse sand) laid and

jointed with grey cement slurry including rubbing
9039 & polishing complete.
a Pure white makrana marble slab 25 mm thick. sq.m 8063.00
White makrana marble with blue or black veins
b sq.m 3251.00
(25 mm thick)
Marble tiles in risers of steps, skirtings, dado,
walls and pillars laid on 12 mm (average) thick
base of cement mortar 1:3 (1 cement : 3 coarse
sand) and jointed with grey cement slurry

including rubbing and polishing complete with
9040 Kotah stone slab flooring over 20 mm (average
thick base of lime mortar 1:1:1 (1 lime putty : 1
surkhi : 1 coarse sand) laid
a Plain white makrana marble slab 25 mm thick sq.m 10112.00
White makrana marble with blue or black vein (25
b sq.m 5299.00
mm thick)
Kotah stone slab flooring over 20 mm (average)
thick base laid over & jointed with grey cement
slurry mixed with pigment to match the shade of
9041 sq.m 1531.00
the slab including rubbing & complete with base
of lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1
coarse sand)
Kotah stone slab flooring over 20 mm (average)
thick base laid over & jointed with grey cement
slurry mixed with pigment to match the shade of
9042
the slab including rubbing & complete with base
of cement mortar 1:4 (1 cement : 4 coarse sand)
a 20 mm thick. sq.m 1581.00
Kotah stone slab flooring over 25 mm thick in
risers of steps, skirtings, dado & pillars laid on
12mm (average) thick cement mortor 1:3 (1
b cement : 3 coarse sand) & jointed with grey sq.m 1668.00
cement slurry mixed with pigment to match the
shade of the slab including rubbing & polishing
complete.
25 mm wooden plank tongued and grooved, in
flooring including fixing with iron screws
9043 complete with
a Second class Indian teak wood. sq.m 5058.00
b Second class matti wood sq.m 3340.00
Colour glazed tiles 6 mm thick in flooring, treads
of steps, landings laid on a bed of 12 mm thick
9044 cement mortar 1:3 (1 cement : 3 coarse sand) sq.m 1368.00
finished with flush jointing in coloured cement of
required pigment.
Colour glazed tiles 6 mm thick in skirtings risers
of steps, dado laid on a bed of 12 mm thick
9045 sq.m 1316.00
cement plaster 1:3 (1 cement : 3 coarse sand )
jointed with white cement slurry.
Providing and fixing colured plain ceramic glazed
9046 Metre 303.00
internal or external angles of 50 mm size.
Providing and laying crazy paving (as per design
shown in the drawing or as directed by the
engineer-in- charge) with approved quality
9047 shahabad tile 20 mm thickness (unpolished) of sq.m 789.00
specified sizes laid on 20 mm thick (average) bed
of cement mortar 1:5 (1 cement : 5 coarse sand)
as directed completed.
Cuddappah stone slab machine cut flooring over

20mm (average) thickness of cement mortar 1:4
(1 cement : 4 coarse sand laid over and jointed
9048 sq.m 1167.00
with grey cement slurry mixed with pigment to
match the shade of the slab including rubbing
and polishing complete - 25 mm thick.
Providing and fixing coloured ceramic tiles
spartek or equivalent of 8" x 8" size and 6 mm
9049 thick in skirting and dados on 12 thick cement sq.m 876.00
plaster 1:3 (1 cement : 3 coarse sand) and jointed
with cement slurry complete.
9050 thick in skirting and dados on 12 mm thick sq.m 876.00
cement plaster 1:3 (1 cement : 3 coarse sand) and
jointed with cement slurry complete.

spartek or equivalent of 12 " x 12" (399x150 mm
9051 cut size) 6 mm thick in skirting and dados on 12 sq.m 876.00
mm thick cement plaster 1:3 (1 cement : 3 coarse
sand) and jointed with cement slurry complete.
9052 thick in floors thread of steps and landing on 25 sq.m 979.00
mm thick bed of cement mortar 1:3 and jointed
mm bed of cement of cement mortar 1:3 and
jointed with cement slurry complete.
mm thick bed of cement mortar 1:3 and jointed
Precast terrazao tiles 20 mm thick with white,

black or white, black marble chips of size upto 6
mm laid in floors, thread of steps & landings 25
mm thick bed of cement mortar 1:4 (1 cement : 4

coarse sand) jointed with neat cement slurry
mixed with pigment to match the shade of the
9055 tiles including rubbling & polishing complete
with precast tiles of
a Light shade using while cement sq.m 1097.00
Medium shades suing approx. 50% ordinary
b sq.m 1143.00
cement
c Dark shade using ordinary cement sq.m 1099.00
Rounding of edges of marble slab to semi circular
9056 Metre 468.00
slope
Providing and laying ceramic tiles 12”x12” in
floors treads of steps landings with adhesive
9057 including filling the joints with required pigment sq.m 855.00
etc. complete as directed by the engineer-in-
charge
Providing 20mm thick marble slab to urinal
9058 sq.m 10270.00
partitions with cement complete
Providing and laying jet black mirror polish
granite flooring and dado over 20mm thick base
of cement mortar 1:4 laid over and jointed with
9059 sq.m 3068.00
cement slurry including rubbling complete
Granitic slab (jet blck with mirror polish) 20 mm
thick add q0% wastage 1.00
Providing and laying 20mm thick cuddapah in
9060 shelves over 20 mm thick base of cement mortar sq.m 781.00
1:3 complete
Providing 25 mm thick cuddapah slabs machine
cut and polished on either side in partitions
9061 including making necessary grooves in the wall sq.m 947.00
and fixing with cement mortar, complete as
directed by the engineer-in-charge
Providing and laying 25 mm shahabad stone
flooring over 25 mm thick bed of cement mortar
9062 1:4 (1 cement :4 coarse sand) laid over with grey sq.m 1166.00
cement slurry mixed with pigment, including.
Rubbing and polishing complete.
Marble stone flooring with 18 mm thick marble
stone (sample of marble shall be approved by
Engineer-in-charge) over 20mm (average) thick
9063 base of cement Mortar 1:4 (1 cement:4 coarse )
using :
a white Makrana Marble. sq.m 8000.00
b White Makrana Marble with blue or black veins sq.m 2418.00
Fixing glazed/ceramic/vitrified floor tiles with
cement based high polymer midified quick-set tile
9064 adhensive (waterbased) conforming to IS 15477, sq.m 414.00
using 5kg. Adhensive per sq.m. of tile area, in avg
3mm thickness .
Providing and fixing Kota stone tread tiles 35mm
thick in single piece with rounded of nosing
antiskid groove laid on and including 20mm
9065 sq.m 1928.00
(average ) thk bed of cement slurry including
pointing with pigmented cement slurry to match
the shade of the slab, cleaning etc. complete.
Providing and fixing vitrified matt finished
(600x600) and 10mm thick tiles in floor, treads of
9066 steps, landing on 25mm thick bed of cement sq.m 1120.00
mortar 1:3 and jointed with cement slurry
complete.
Providing and fixing vitrified glossy finished
complete.
Providing and fixing vitrified antiskid tiles
complete.
Precast plain Cement Tacktiles 32mm thk of
required shade in floors, treads of steps and
landing laid on 25mm bed of cement mortar
9069 sq.m 1161.00
1:4(1cement:4coarse sand) jointed with neat
cement slurry with pigment to match the shade of
tiles including rubbing and polishing complete.
Providing and fixing Vinyl flooring of approved
9070 sq.m 925.00
shade and design with adhesive complete.
Providing red agra stone flooring 30 mm
thickness (avg) on 20 mm thick base of cement
mortar 1:4 (1 cement :4 coarse send) jointed with
9071 sq.m 1493.00
grey cement slurry mixed with pigment to match
the shade of the tile including rubbing and
polishing complete
Providing and fixing coloured ceramic tiles (Bell
or equivalent) of 8" x 12" size and 6 mm thick in
9072 skirting and dados on 12 mm thick cement sq.m 852.00
plaster 1:3 (1 cement : 3 coarse sand) and jointed
Providing and fixing coloured ceremic tiles(bell or
equivalent) of 16" x 16" size and 6 mm thick in
9073 skirting and dados on 12 mm thick cement plaster sq.m 876.00
1:3 (1 cement : 3 coarse sand) and jointed with
cement slurry complete.
Providing and fixing 1st quality ceramic glazed
wall tiles (Johnson, Somany, Kajaria )conforming
to IS:15622 (thickness to be specified by the
manufacture of approved make in all colours,
shades except burgundy, bottle green, black of any
size as approved by Engineer-in-charge in
9074
skirting, risers of steps and dados over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3
coarse sand ) and jointing with grey cement slurry
@3.3kg per sq.m including pointing in white
cement mixed with pigment of matching shade
complete.
a Wall Ceramic Glazed Tiles : 200 x 300 sq.m 792.00
b Wall Ceramic Glazed Tiles : 300 x 450 sq.m 892.00
c Wall Ceramic Glazed Tiles : 300 x 600 sq.m 988.00
Providing and and laying Ceramic glazed floor
tiles 300 x 300 (thickness to be specified by the
manufacturer) of 1st quality conforming to
IS:15622 of approved make in colours such as
9075 sq.m 1016.00
white, ivory, grey, fume red, brown laid on 20 mm
thick cement mortar 1:4 (1 Cement : 4 Coarse
sand) including pointing the joints with white
cement and matching pigment etc., complete
Providing and and laying antiskid floor tiles 12 x

12 upto 16 x 16 in of Johnson, Somany, Kajaria
(thickness to be specified by the manufacturer) of
1st quality conforming to IS:15622 of approved

make in shades as specified laid on 20 mm thick
9076 cement mortar 1:4 (1 Cement : 4 Coarse sand)
including pointing the joints with white cement
and matching pigment etc., complete
a Dark Shades sq.m 968.00
b Light Shades sq.m 926.00
Providing and and laying rustic floor tiles
(rectified) 374 x 374 mm of Johnson, Somany,
Kajaria or equivalent (thickness to be specified by
the manufacturer) of 1st quality conforming to
IS:15622 of approved make in shades as specified
9077 laid on 20 mm thick cement mortar 1:4 (1 Cement
: 4 Coarse sand) including pointing the joints with
white cement and matching pigment etc.,
complete
a Dark Shades sq.m 1048.00
b Light Shades sq.m 1240.00
Providing and and laying vitrified floor tiles in
different sizes of Johnson, Somany, Kajaria
(thickness to be specified by the manufacturer)
with water absorption less than 0.08% and
conforming to IS:15622 of approved make in
colours and shades as specified laid on 20 mm
9078 thick cement mortar 1:4 (1 Cement : 4 Coarse
sand) including grouting the joints with white
a 600x 600 mm Dark Shades sq.m 1128.00
b 600 x 600 mm light Shades sq.m 1057.00
c 900x 900 mm Dark Shades sq.m 1271.00
d 900 x 900 mm light Shades sq.m 1134.00
Providing and and laying scratch resistant floor
tiles in different sizes of Johnson, Somany, Kajaria
with water absorption less than 0.08% and
conforming to IS:15622 of approved make in
9079 colours and shades as specified laid on 20 mm
sand) including grouting the joints with white
a 600x 600 mm Dark Shades sq.m 1333.00
b 600 x 600 mm light Shades sq.m 1307.00
Providing and laying vitrified industrial floor tiles
in different sizes of Johnson, Somany, Kajaria
and conforming to IS:15622 of approved make in

colours and shades as specified laid on 20 mm
9080 sand) including grouting the joints with white
a 300 x 300 mm darkShades - 10 mm thick sq.m 1279.00
b 300 x 300 mm dark Shades - 12mm thick sq.m 1460.00
c 300 x 300 mm Light Shades - 10 mm thick sq.m 1307.00
d 300 x 300 mm Light Shades - 12mm thick sq.m 1574.00
Providing and and laying vitrified unglazed
porcelain tactile floor tiles in different sizes of
Johnson, Somany, Kajaria (thickness to be
specified by the manufacturer) and conforming to
IS:15622 of approved make in colours and shades
9081 as specified laid on 20 mm thick cement mortar
1:4 (1 Cement : 4 Coarse sand) including grouting
the joints with white cement and matching
pigment etc., complete
a 300 x 300 mm Design - Liner sq.m 985.00
b 300 x 300 mm Design - Buttons sq.m 985.00
Deduct for not using 20 mm thick cement mortar
9082 1:4 (1 cement : 4 coarse sand) bedding in laying of sq.m 462.00
floor tiles
Fixing glazed / ceramic / vitrified floor tiles with
cement based high polymer modified quick-set
9083 tile adhesive (water based) conforming to sq.m 293.00
IS:15477, using 5 kg. adhesive per sq.m of tile
area, in average 3 mm thickness
Providing and laying factory made Shot blasted

9084
cement concrete interlocking paver block of
minimum M35/M40 grade made by heavy duty
block making machine with strong vibratory
compaction and of aprpoved size and design /
shape laid in 50 mm thick compacted bed of
coarse sand, filling the joints with coarse sand, etc.
all complete as per the direction of Engineer.- in I,
Wave, Rectangular, Square etc. shapes. The
products should comply to IS 15658:2006 and
manfucatured by ISO9001: 2008 certified plant.
The shot blasting should be done using 0.4-0.5mm
dia steel shots with a speed of 3200 rpm.
60 mm thick in all colours except grey (M35
a sq.m. 1200.00
grade)
b 60 mm thick in Grey colour (M35 grade) sq.m. 1139.00
80 mm thick in all colours except grey (M40
c sq.m. 1233.00
grade)
d 80 mm thick in grey colour (M40 grade) sq.m. 1175.00
Providing and fixing in position Glass mossaic tiles
at finished plain/flat/curved/inclided surface of
size 10-50 mm square x 4 mm in all colour,
design , fixing in customize design as per direction
of Engineer. The glass mosaic tiles to be fixed on
9085 sq.m. 1911.00
the surface with the help of approved adhesive
applied at the rate of 2.5 kg per sqm and grouting
of the same. The rate is inclusive of all operation,
material and required pattern approved by
Engineer.
Vaccum dewatering of laid concrete for roads/
areas using Tremix machinery including
formwork with MS channel/ angle sections on
sides of concrete with proper supporting system,
surface/screed & needle vibrating & levelling of
concrete. Vaccum dewatering should be done
using suction mats (spread on surface) & suction
pump, power floating/ troweling using screen
floater, manual spreading of hardening compound
(if any), smooth/rough/broom finish to the
9086 cu.m. 1143.00
required slope, camber & level, groove cutting
(upto 10mm wide x50mm deep) for
contraction/expansion, construction &
longitudinal hoints, Providing dowel bars with
sleeve/tie bars, filling two component
polysuphide sealant/joint filler (Bitumen hot
sealing compound: Grade A), taping with masking
tape etc complete. (Concrete, reinforcement,
Dowel Bar with sleeve/tie bar Reinforcement,
tarpaulin sheet to be paid separately)
Providing and fixing Vitrified tiles in different
sizes (thickness to be specified by manufacturer),
with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all
colours & shade, in skirting, riser of steps and
dados, jointing with grey cement slurry @3.3 kg
9087 per sqm, including pointing/grouting in white
cement mixed with pigment of matching shade
complete.
a 600 x 600 mm - Dark Shades sq.m. 1050.00
b 600 x 600 mm - light Shades sq.m. 980.00
c 900 x 900 mm - Dark Shades sq.m. 1194.00
d 900 x 900 mm - light Shades sq.m. 1174.00
Providing and laying flamed finish Granite stone
flooring in required design and patterns, in linear
as well as curvilinear portions of the building all
complete as per the architectural drawings with
18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry
and pointing with white cement slurry admixed
9088 with pigment of matching shade including
rubbing, curing and polishing etc. all complete as
specified and as directed by the Engineer : Flamed
finish granite stone slab.
a Jet Black sq.m. 4612.00
b Cherry Red sq.m. 2446.00
c Elite Brown sq.m. 2433.00
d Cat Eye sq.m. 3305.00
Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity
counters, window sills, facias and similar
locations of required size, approved shade, colour
and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints
treated with white cement, mixed with matching
9089 pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give
high gloss finish etc. complete at all levels. Granite
of any colour and shade, area of slab over 0.50
sqm
a Jet Black sq.m. 4085.00

Jaisalmer stone flooring with 18mm thick
polished Jaisalmer stone over 20mm (average)
9090 sq.m. 2042.00
thick base of CM 1:4 (1 cement : 4 Coarse sand)
with joints finished flush
Providing and fixing Scratch resistant ceramic

tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than
0.08 % and conforming to I.S. 15622, of approved
make, in all colours & shade, in skirting, riser of
9091 steps and dados, jointing with grey cement slurry
@3.3 kg per sqm, including pointing/grouting in
white cement mixed with pigment of matching
shade complete.
a 600 x 600 mm - Dark Shades sq.m. 1249.00
b 600 x 600 mm - Light Shades sq.m. 1230.00
Providing and laying in design & pattern factory
made chamfered edge Cement Concrete paver
blocks ( C. C. paver blocks) of M35/M40 strength,
thickness & size/shape, made by table vibratory
method using PU mould, laid in required colour &
pattern over 50mm thick compacted bed of fine
sand, compacting and proper embedding/laying
of inter locking paver blocks into the sand

bedding layer through vibratory compaction by
using plate vibrator, filling the joints with
river/manufactured sand and cutting of paver
blocks as per required size and pattern, finishing
9092 and sweeping extra sand in footpath, parks, lawns,
drive ways or light traffic parking etc. complete as
per manufacturer’s specifications & direction of
Engineer.
a 60mm thick with Grey colour (M35 grade) sq.m. 1064.00
b 60mm thick with Red/ Black colour (M35 grade) sq.m. 1122.00
60mm thick with Yellow/ Orange/ Earth colour
c sq.m. 1122.00
(M35 grade)
d 80 mm thick with Grey colour (M40 grade) sq.m. 1157.00
e 80 mm thick with Red/ Black colour (M40 grade) sq.m. 1216.00
80 mm thick with Yellow/ Orange/ Earth color
f sq.m. 1216.00
(M40 grade)
Providing and fixing Granite stone slabs (flamed
finish) 18mm thick in risers of steps, skirting,
dado and pillars laid on cement paste and jointed

match the shade of the slabs, including rubbing
9093 and polishing complete
a Jet black sq.m. 3434.00
Providing and fixing Granite stone slabs (mirror
polished) 18mm thick in risers of steps, skirting,
dado and pillars laid on cement paste and jointed

match the shade of the slabs, including rubbing
9094 and polishing complete
a Jet black sq.m. 3434.00
Providing and laying in design & pattern factory
made PVC RUBBER MOULDED Interlocking
Cement Concrete paver blocks of M35/M40
strength, thickness & size/shape, made by table
vibratory method using Rubber mould, laid in
required colour & pattern over 50mm thick
compacted bed of fine sand, compacting and
proper embedding/laying of inter locking paver

blocks into the sand bedding layer through
vibratory compaction by using plate vibrator,
filling the joints with river/manufactured sand
9095 and cutting of paver blocks as per required size
and pattern, finishing and sweeping extra sand in
footpath, parks, lawns, drive ways or light traffic
parking etc. complete as per manufacturer’s
specifications & direction of Engineer.
a 60mm thick -Grey colour (M35 grade) sq.m. 846.00
60mm thick -Coloured other than Grey (M35
b sq.m. 905.00
grade)
d 80 mm thick -Grey colour (M40 grade) sq.m. 1052.00
80 mm thick -coloured other than Grey (M40
e sq.m. 1111.00
grade)
Crazy ceramic tile flooring (China Mosaic
flooring), with under layer 12 mm thick cement
mortar 1:4 (1 cement: 4 coarse sand), with joints
not exceeding 5 mm, including filling the gaps
with ordinary cement mixture & mixing with
synthetic polyester fibre, triangular in shape
9096 having specific gravity of 1.34 to 1.40, cross sq.m. 798.00
section size ranging from 10 to 40 micron &
length upto 6 mm , mixing fibre @ 125 grams per
50 kg of cement in cement mortar, including
providing and mixing water proofing material in
mortar @ 1 kg per 50 kg of cement, all complete
as per direction of Engineer-in-charge.
CHAPTER XIII
ROOFING & CEILING WORKS
SR.
NO.
Providing corrugated G.I. sheet roofing, fixed with
galvanized iron j or 1 hooks, bolts and nuts 8 mm
diameter with bitumen and G.I. limpet washers
1000 filled with white lead complete excluding the cost
1 of purlins rafter and trusses.
a 0.63 mm thick sheet - 24 G sq.m 751.00
b 0.50 mm thick sheet.-26G sq.m 641.00
Proving ridges or hips of width 60 cm over all in
plain G.I. sheet fixed with galvanized iron J or L

1000 hooks bolts and nuts 8 mm dia G.I. limpet and
2 bitumen washers complete
a 0.80 mm thick sheet. Metre 857.00
b 0.63 mm thick G. I. Sheet. Metre 746.00
Providing and fixing 15cm wide 45cm overall
semi-circular plain G.I. sheets gutter with iron
brackets 40 x 3 mm bolts nuts and washers etc.,
1000 including making necessary connection with rain
3 water pipe complete as per design.
a 0.80 mm thick sheet Metre 662.00
b 0.63 mm thick sheet Metre 569.00
Extra for providing and fixing curved corrugated

1000 G.I. sheets to roofing
4 a 0.80 mm thick sheet sq.m 15.00
b 0.63 mm thick sheet sq.m 12.00
1000 Extra for providing & fixing corrugated G.I. sheets

sq.m 15.00
5 vertically or to a pitch exceeding 60 degrees.
Extra for straight cutting and waste in corrugated
G.I. sheet roofing for making opening of area

1000 exceeding 40dm2 for chimneys stacks, sky light
6 etc.
Extra for racking or circular cuttings and waste in

1000 C.G.I. sheets roofing.
7 a 0.63 mm thick sheet Metre 265.00
Extra for making opening or recesses in C.G.I.

sheets roofing or girth not more than 1 m.
1000
a Upto 100 sq.cm. in area Each 37.00
8
b Above 100 sq.cm. but upto 400 sq.cm. in area Each 95.00
c Above 400 sq.cm. in area Each 143.00
Providing valleys 90 cm overall in plain 1.60 mm
1000 thick G.I. sheet fixed with galvanized iron j or l
Metre 1647.00
9 hooks bolts 8mm dia G.I. limpet and bitumen
washers complete.
Providing flashings 35 cm overall in plain G.I.
sheet fixed with gavalnized iron j or l hooks, bolts
and nuts G.I. limpet & bitumen washer complete
1001 bent to shape and fixed in walls in cement mortar
0 1:3 (1 cement : 3 coarse sand).
Extra for making opening or recesses in plain G.I.

sheets of girth not more than 1 m.
1001
a Upto 100 sq.cm. in area. Each 26.00
1
b Above 100 sq.cm. but upto 400 sq.cm. in area. Each 19.00
c Above 400 sq.cm. in area Each 41.00
1001 Extra for providing and fixing wind ties of 40 x
Metre 173.00
2 6mm flat iron section.
Providing asbestos cement sheets roofings fixed

with galvanized iron j or l hooks, bolts & nuts
1001
8mm dia G.I. plain and bitumen washer complete
3
excluding the cost of purlines rafters, and trusses.
a Corrugated sheets 6mm thick. sq.m 714.00

Extra for asbestos cement corrugated sheets
1001
roofing with vertical sheeting or sheeting to a sq.m 17.00
4
pitch exceeding 60 degree.
Extra for straight cutting and waste in AC
1001 corrugated sheet roofing for making opening of
Metre 143.00
5 area exceeding 0.40 sq.m. for chimney stacks, sky
lights etc. (a) 6mm thick corrugated sheet
Extra for racking or circular cutting and waste in

1001
AC corrugated or semi – corrugated sheet roofing.
6
a 6mm thick corrugated or semi corrugated sheet Metre 232.00
Providing and fixing ridges & hips in asbestos
cement sheets roofing with G.I. j or l hooks, bolts

and nuts 8mm dia G.I. plain and bitumen washers
1001 complete.
7
a One piece plain angular ridges Metre 205.00
b Serrated or plain wing adjustable ridges Metre 238.00
c Close fitting adjustable ridges Metre 271.00
Extra for straight cutting and waste in AC
corrugated, semi corrugated sheet roofing for
1001
making openings of area exceeding 0.40 sq.m. for
8
chimeney stacks, skylights etc.
a 6mm thick semi – corrugated sheet Metre 78.00
Extra for making or circular cutting and waste in
1001
A.C. sheet roofing:
9
a 6mm thick semi corrugated sheet Metre 161.00
Extra for making openings or recesses in A.C.
corrugated, semi – corrugated sheet roofing of
girth not more than 1meter
1002
a Those not exceeding 100 sq.cm. in area Each 49.00
0
Those exceeding 100 sq.cm. but not exceeding
b Each 94.00
400 sq.cm.
c Those exceeding 400 sq.cm. in area Each 136.00
Providing and fixing ridges & hips in asbestos
cement sheets roofing, with G.I. j or l hooks bolts
1002 and nuts 8mm dia G.I. plain and bitumen washer
1
a North light adjustable ridges Metre 276.00
b Unserrated adjustable hips Metre 270.00
Providing and fixing asbestos cement roofing
accessories with galvanized iron J or L hooks,

bolts and nuts and or G.I. seam bolts G.I. plain and
bitumen washers etc. complete.
1002
a Apron flashing pieces Metre 151.00
2
b Eaves fillet pieces Metre 127.00
c Northlight & Ventilator curves Metre 331.00
d Barge boards Metre 95.00
e Expansion joints for sheets Metre 130.00
f Ridge finals Each 158.00
g Cowl type ventilators Each 246.00
h Curved barge boards for north light curves Each 348.00
i Roof lights Each 994.00
j Expansion joints for ridges pair 425.00
k Expansion joints for north light curves Metre 101.00
l S. Type louvers Metre 273.00

Providing Thatched roofing 15 cms thick in two
1002
layers Each 75 mm thick with Pool as, half split sq.m 375.00
3
bamboos fillet and tying strings complete
Providing and laying split bamboo jaffree 150mm
1002
mesh including tying to the purlins and rafters sq.m 182.00
4
with mung ban or string complete.
1002 Providing & laying thatched capping to ridges &
Metre 429.00
5 hips upto 1m girth including tying etc. complete.
Making khurras 45 x 45cm with average minimum

thickness of 5cm of cement concrete 1:2:4 (1
cement: 2 coarse sand : 4 stone aggregate of
1002
20mm nominal gauge) finished with 12mm Each 213.00
6
cement plaster 1: 3 (1 cement: 3 coarse sand) & a
coat of neat cement rounding the edges and
making and finishing the outlet complete.
Providing angular fillets 7.5 x 7.5 cm cement

1002
concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded Metre 26.00
7
stone) aggregate 20mm nominal size)
Making water purnelas 25cm to 35 cm wide along
1002 the wall with cement mortar 1:4 (1 cement; 4 fine
Metre 111.00
8 sand) & finished neat with floating coat of neat
cement.
Providing and laying 1st class mangalore tile roof
1002 covering with 25 x 50mm (1” x 2”) jamba wood or
sq.m 913.00
9 similar batten including nails etc. but excluding
rafters.
Providing and laying 2nd class mangalore tile roof
1003 covering with 25 x 37 mm (1” x 1.5”) jamba wood
sq.m 802.00
0 or similar batten including nails etc., but excluding
rafters.
Laying mangalore tile roof covering with 25 x 50
1003 mm jamba wood or similar battern including nail
sq.m 539.00
1 etc. complete (mangalore tiles will be supplied by
the department free of cost).
Laying mangalore tile roof covering with 25 x 37
1003 mm jamba wood or similar battern including nails
sq.m 473.00
2 etc. complete (mangalore tiles will be supplied by
the department free of cost).
1003 Providing and laying ridge tiles laid dry & pointed
Metre 398.00
3 with lime mortar 1: 2 (1 lime: 2 surkhi)
Laying the ridge tiles laid dry and pointed with
1003
limemortar 1: 2 (1 lime : 2 surkhi) (ridge tiles will Metre 117.00
4
be supplied by the department free of cost).
G.I. sheet gutters 26 s.w.g. semi circular 15cm
1003 width and 45 cm overall including fixing with
Metre 345.00
5 clamps & making connection with rain water pipe
complete.
Ridge and valleys 45cm overall in plain G.I. sheet
1003
26 s.w.g. fixed with galvanised j or l hooks 3/8” Metre 412.00
6
dia G.i. limpets and bitumen washers complete.
Filling cement concrete 1:2:4 (1 cement : 2 coarse
1003 sand : 4 hard aggregate 12.5 mm nominal gauge)
Metre 59.00
7 in gaps of A.C. sheets corrugation and wings of
ridges.
Providing and fixing 20mm thick wooden planks
ceiling (frame work for base to be paid
1003 separately) with M.S. screws
8
a Indian teak wood second class sq.m 3314.00
b Nano or chafo wood sq.m 1409.00
Providing and fixing 13mm thick wooden planks
ceiling (frame work for base to be paid
1003 separately) with M.S. screws
9
a Second class indian teak wood sq.m 2309.00
b Nano or chafo wood sq.m 1010.00
Providing and fixing 4mm thick ply wood (5 ply)
ceiling with second class indian teak wood
1004 beading of size 65 x 12mm not exceeding 180 cm
sq.m 1060.00
0 center to centre apart and brass screws 1.5” for
fixing etc. complete (frame work for base to be
paid separately)
Providing and fixing 4 mm thick A.C. plain sheet
1004
ceiling of approved quality with necessary nails sq.m 455.00
1
etc. complete (frame work to be paid separately)
Providing & fixing insulating board board sheet
ceiling of approved of quality with necessary nails,
1004
etc. complete (frame for base to be paid
2
separately)
a White faced insulating board 12mm thick sq.m 767.00
b White faced insulating board 18 mm sq.m 888.00
Providing & fixing hard board sheet ceiling of
1004
approved quality with necessary nails, etc.
3
complete (frame for base to be paid separately)
Standard quality 4 mm thick sq.m 640.00
Providing & fixing hard board sheet ceiling of
1004 approved quality with necessary nails, etc.
sq.m 468.00
4 complete (frame for base to be paid separately)
Design boards 4 mm thick.
Providing and fixing insulating board sheet ceiling
of approved of approved quality with necessary
1004
nails etc. complete (frame for base to be paid sq.m 586.00
5
seperately). Flame retardent insulating board 12
mm.
Providing 18mm thick plaster of parts (gypsum
anhydrous) ceiling upto height of 5m above floor
level over 1st class matti wood strips 25 x 6mm
1004 with 10mm gap in between & reinforced with
6 rabbit wire mesh fixed to wooden frame.
a Flat Surfaces sq.m 1503.00
b Curved surfaces sq.m 2059.00
1004 Extra for any sunk moulding in the plaster of
sq.m 407.00
7 Paris (gypsum anhydrous)
1004 Extra for providing plaster of Paris (gypsum
sq.m 141.00
8 anhydrous) ceiling above 5 m from floor level.
Providing and fixing 12mm thick plaster of Paris
(gypsum anhydrous) ceiling tiles upto a height of
1004
5m above floor level over wooden frames sq.m 723.00
9
rendered smooth with plaster of paris (gypsum
anhydrous) (frame work to be paid separately)
Extra for providing and fixing plaster of paris
1005
(gypsum anhydrous) ceiling tiles above 5 meters sq.m 70.00
0
height from floor level PER meter HEIGHT.
Providing and fixing in position ceiling tiles of
12mm thickness made of uncovered teak wood
particle board bonded with phenol formal dehyde
synthetic resin conforming to IS 3087 – 1965 with

necessary second class indian teak wood beading
1005 of size 65 x 12 mm with brass screws (30 mm
1 size) complete (frame work for base to be paid
separately)
a Plain boards sq.m 1389.00
b Half random perforated board sq.m 1489.00
c Full random perforated board sq.m 1585.00
Providing and fixing plain square edged wooden
boarding 65 x 12mm with screws of approved
1005 quality for ceiling
2
a Second class indian teak wood Metre 185.00
b Nano wood Metre 116.00
Providing and fixing on wall face C.I.. rain water
pipes including filling the joints, with spun yarn

1005 soaked in neat cement slurry and cement mortar
3 1:2 (1 cement: 2 fine sand)
a 100 mm dia pipe Metre 536.00
b 150mm dia pipe Metre 922.00
Providing and fixing M.S. holder bat clamps of

approved design to C.I. or S.C.I. pipes embeded in
and including cement concrete blocks 10 x 10 x 10

cm of 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
1005 stone aggregate 20mm nominal size) including
4 cost of cutting holes and making good the wall etc.
a 75mm or 80mm dia. Each 238.00

b 100mm dia meter Each 252.00
c 150 mm diameter Each 273.00
Providing and fixing on wall face C.I. accessories
for rain water pipes including filling the joints

1005 with spun yarn soaked in neat cement slurry and
5 cement mortar 1 : 2 (1 cement : 2 sand):
a C.I. plain bend 100 mm dia Each 289.00
b C.I. plain bend 150 mm dia Each 312.00
Providing and fixing to wall face C.I. acessories for
rainwater pipes including filling the joints with

1005 spun yarn soaked in neat cement slurry and
6 cement mortar 1:2 ( 1 cement : 2 coarse sand)
a C.I. plain shoe 100mm dia Each 328.00
b C.I. plain shoe 150mm dia Each 562.00

1005 spun yarn soaked in neat cement slurry and
7 cement mortar 1:2 ( 1 cement : 2 coarse sand)
a C.I. branch (plain) 100 mm dia single branch Each 340.00
b C.I. branch (plain) 150 mm dia single branch Each 521.00
Providing and fixing on wall face C.I. acessories
for rainwater pipes including filling the joints with
1005
spun yarn soaked in neat cement slurry and
8
cement mortar 1:2 ( 1 cement : 2 coarse sand)
a C.I. branch (plain) 100 mm dia double branch Each 434.00
b C.I. branch (plain) 150 mm dia double branch Each 737.00
1005
spun yarn soaked in neat cement slurry and Each 331.00
9
cement mortar 1:2 ( 1 cement : 2 coarse sand) C.I.
offsets (plain) 100 mm dia 55 mm projection.

Providing & laying six courses water proofing
treatment with bitumen felt over roofs consisting
of first, third and fifth courses of blown or/and
residual bitumen applied hot at 1.45 1.20 and
1006 1.7kg., per sq.m. of area respectively second and
sq.m 741.00
0 fourth course of roofing felt type 3 grade 1
(hessian based self finished bitumen felt ) & sixth
and final course of stone grit 6 mm and down size
or grade gravel spread at 0.008 cu.m per sq. m
excluding grading complete.
Providing and fixing colour coated galvulium

roofing sheets of 0.5mm thickness including all
the accessories (TATA make) but excluding the
a sq.m 870.00
cost of purlins, rafters, trusses, flashings etc.
complete as per the directions of the Engineer in
charge.
Providing and fixing Colouron Plus galvulium

roofing Sheets of 0.5mm thick double ribbed
trapezoidal profile coated 1080mm with cover
b width of 1020mm including all the accessories sq.m 692.00
(JSW or equivalent make) but excluding the cost
of purlins, rafters, trusses, flashings etc. complete
1006 as per the directions of the Engineer in charge.
1
Add for providing & fixing Flashings -[Corners,
Ridges, valleys, gable end & Trims] (Girth upto
c Metre 408.00
610mm) including all the accessories complete as
per the directions of the Engineer in charge.
Providing and fixing Colouron Plus galvulium

roofing Sheets of 0.45mm thick double ribbed
trapezoidal profile coated 1080mm with cover
d width of 1020mm including all the accessories sq.m 653.00
(JSW or equivalent make ) but excluding the cost
of purlins, rafters, trusses, flashings etc. complete
as per the directions of the Engineer in charge.
Add for providing & fixing Flashings -[Corners,
Ridges, valleys, gable end & Trims] (Girth above
e Metre 774.00
610mm) including all the accessories complete
as per the directions of the Engineer in charge.
Providing and fixing plain square wooden
boarding 50 x 12 mm section with screws of
1006
approved quality for ceiling and as directed by the
2
Engineer in charge.
a Nano wood. sq.m 89.00
1006 Supply of mangalore tiles including loading,
Each 20.00
3 unloading and transportation complete.
1006 Supply of mangalore ridge tiles including loading,
Each 71.00
4 unloading and transportation complete.
Providing and laying finolex roof covering with
fittings on existing battens as directed by
Engineer in charge.
1006 a PCV corrugated sheet - 1.0mm thick. sq.m 801.00
5 b PCV corrugated sheet - 1.3mm thick. sq.m 836.00
c PCV corrugated sheet - 1.5 mm thick. sq.m 975.00
d PCV corrugated sheet - 1.8mm thick. sq.m 1187.00
e PCV corrugated sheet - 2.0 mm thick. sq.m 1271.00
Providing and fixing PVC SWR pipes confirming to
IS 13592 type A including jointing with seal ring

1006 confirming to IS 5382 leaving 10 mm gap for
6 thermal expansion.
a Single socketed pipe 75 mm dia Metre 270.00
b Single socketed pipe 110 mm dia Metre 443.00
Providing and fixing Prince or equivalent make

PVC SWR half round eaves gutter with bolts, nuts
1006 and flat iron brackets 40 x 3 mm size complete.
7
a 140 mm nominal size Metre 391.00
b 180 mm nominal size Metre 445.00
c 250 mm nominal size Metre 417.00
Extra for providing flat iron bracket 50 x 3 mm
1006 size instead of 40 x 3 mm size with necessary
Each 12.00
8 bolts nuts, washers etc. for fixing A.C. gutters to
purlins.
Extra for providing and fixing prince or
equivalent make PVC SWR joint bracket with 2
1006 clamps for socketed half round eaves gutters.
9 a 140 mm nominal size Each 253.00
b 180 mm nominal size Each 299.00
c 250 mm nominal size Each 300.00
Extra for providing and fixing prince or equivalent
make PVC SWR running outlet with 2 clamps for
1007 socketed half round eaves gutters.
Extra fjor providing and fixing prince or
equivalent make PVC SWR 90 deg. Elbow with

/without outlet with 2 clamps for socketed half
1007 round eaves gutters.
1
a 140 mm nominal size Each 382.00
make PVC SWR short stop ends for socketed half
make PVC SWR stop end outlet with one clamp for
1007 socketed half round eaves gutters.
make PVC SWR support bracket for socketed half
make PVC SWR clamps for socketed half round
1007 eaves gutters.

make PVC SWR rafter top / side brackets
1007 assembled for socketed half round eave gutters.
6
make PVC SWR rubber gasket for socketed half
make PVC SWR single socket elbow for socketed
1007 half round eaves gutters.
8
make PVS SWR pipe clip for socketed half round
1007 eaves gutters.
9
make PVC SWR rubber seals for socketed half
0
Providing water proofing treatment over the new
R.C.C. roofs terrace toilet by spreading cement
slurry over the R.C.C. slab and laying of 10cms.
Average laterite stone ballast coba with the
necessary gradient for easy flow of rain water and
the coba in covered with damp proof of
Hindustan water proofing co. Or equivalent
jointless water proofing plaster of mix 1:3 ( 1
cement : 3 find sand), finished smooth with
1008 wooden trowel with false marking of 30 cms
sq.m 1029.00
1 square. The vertical surface of the adjoining walls
are to be treated upto a height of 30cms including
rounding of junction (the rate includes for
complete items including labour and materials
and including cost of initial treatment of roof slab
as follows. The injunction of damp proof or
equivalent compound with cement solution will
be given as and when found necessary for filling
honey comb, cracks etc. in the R.C.C. slabs). NOTE:
cement consumption 25 kg/sq.m.
M.F. suspended ceiling (single layer) which
includes G.I. perimeter of size 0.55 mm thick
1008
(having one flange of 20 mm and another flange of sq.m 652.00
2
30 mm and a web of 27 mm) alongwith perimeter
of ceiling, screw fixed to brick wall / partition wit
M.F. wall linging which includes 9.5 /12.5 mm

thick Gypsum board (conforming to IS : 2095 –
1008 1982) screw fixed to the ceiling section (0.55 mm
sq.m 618.00
3 thick having a knurled web of 51.5 mm and two
equal flanges of 26 mm each with lips of 10.5 mm
made of
75 mm Metal stud partition 2438 mm height

which includes one layer of tapered edge 12.5 mm
1008 thick Gypsum board (conforming to IS:2095 –
sq.m 1136.00
4 1982) screw fixed with drywall screw of 25 mm at
300 mm centres to either side of 48 mm studs
(0.55 mm thick)
97 mm metal stud partition 2438 mm height)

which includes one layer of tapered edges 12.5
1008 mm thick Gypsum board (conforming to IS : 2095
sq.m 1151.00
5 – 1982) or equivalent, screw fixed with drywall
screw of 25mm at 300 mm centres to either side
of 70 mm studs (0.55 mm thick)
Gypliner or equivalent ceiling which includes
providing & fixing G.I. HG angle of sie 0.55 mm
thick having two equal flanges of 25 mm each
screw fixed to brick wall / partition with the help
of nylon sleeves & screws at 610 mm c/c. Then
suspending chan 12.5 mm tapered edge
Gypboard (confirming to IS:2095-1982) is then
fixed to channel section with 25 mm drywall
1008
screws at 230 mm centre. Screw fixing is done sq.m 657.00
6
mechanically with drill machine and suitable
attachment. Finally square and tapered edges
joints of the boards are jointed and finished so as
to have flush look which includes filling finishing
with jointing compound, joint paper tape and two
coats of Drywall top coat suitable for Gypboard
(as per recomended practices of India Gypsum
Limited).
Gypliner wall lining or equivalent which includes
12.5 mm thick or equivalent (confirming to IS :
1008 2095 – 1982) screw fixed to the Gypliner channel
sq.m 646.00
7 section (0.55 mm thick having a web of 45 mm &
two equal flanges of 18 mm each with lips of 6
mm made of G.I. Ste
Fineline or equivalent (pre-coated) 600 mm x
600mm grid size providing & fixing pre-coated
G.I. angle size 24 x 24 x 0.90 mm thick fixed to the
brick wall/partition at the perimeter of ceiling
with nylon sleeves and screws at 610 mm centres.
Then suspending main G.I. `T’ section (bottom
pre-coted) size 24x38x0.7 mm and 3600 mm long
from soffit in one direction with the help of metal
rawl plug, soffit cleat & G.I. rod 4 mm diameter
1008
with galvanished spring steel level clip 1220 mm sq.m 606.00
8
centres G.I. Cross T section (bottom pre-coated)
size 24x 38.70 mm and 600 mm long in insert
fixed into the slots provided in main `T’ at 600 mm
centres to form 600 x 600 mm grid.Boarding: 9.5
mm / 12.5 mm thick thick Gyboard or equivalent
cut in panel size of 595 x 595 mm can be laid onto
the grid P.V.C. universal holding clips are to be
placed on ceiling panel in each direction i.e. 4 clips
per panel.
Fineline or equivalent (precoated) 600 mm x

1200 mm grid size pre-coated G.I. angle size 25 x
25 x 0.70 mm thick fixed to the brick wall /
partition at the perimeter of ceiling with nylon
sleeves and screws at 610 mm centres. Then
suspending main G.I. `T’ section (bottom
precoated) size 24 x 38 x 0.7 mm and 3600 mm
long from soffit in one direction with the help of
Metal Rawl Plug, sffit cleat & G.I. Rod 4 mm
1008
diameter with galvanished spring steel level clip sq.m 591.00
9
1220 mm centres G.I. Cross T section (bottom pre-
coated) size 24 x 38 x 0.70 mm and 600 mm long
is insert fixed into the slots provided in main `T’ at
1200 mm centres to form 1200 x 600 mm grid.
Boarding : 9.5 mm / 12.5 mm thick Gyboard cut
in panel size of 595 x 595 mm can be laid onto the
grid P.V.C. universal holding clips are to be placed
on ceiling panel in position 2 nos. on 1195 mm
side and 1 no. on 595 mm side.
Providing & fixing in position
Galvalume/Zincalume flashings, cappings, ridges,
gutters upto 600mm/610mm girth and min
3.00m in length (cold Rolled Steel 550 MPa yeild
Stress ASTM A 446 Grade E) with hot-dip metallic
coating of aluminium-zinc alloy(AZ 150
galvalume) (150 gms/sqm total of both sides with
Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si
conforming to ASTM 792/ AS 1397) 0.45 mm base
metal thickness and 0.50mm total coated
thickness, factory cut at all heights for roof, side &
1009
gable cladding complete in all respects with AZ Metre 401.00
0
150 GSM SMP color Coated (20mic exterior coat of
Silicon Modified Polyester paint system over 5 mic
primer and 5 mic polyester back coat over 5 mic
primer) incl. fixing to purlins with no
12x14x55mm mechanically galvanised hex head
self drilling screws of the best quality as per AS-
3566 class 3-4 approved, which should be
compatible to be used with sheets. with integral
washers and EPDM seals etc. Silicon sealant non-
hardening neutral cure type shall be applied at all
end laps, complete as directed.
Supplying and Providing in position under deck

50mm thk non combustible Glass wool insulation
24 kg/m3 density with white prelaminated
polypropelene facing (WMP-50) under the
1009 metallic roof complete for sound and heat
sq.m. 558.00
1 insulation including cost of GI welded mesh of
75x75x1.60 thk streched over purlin complete.
The GI Welded mesh should be primed and
painted with min. 2 coats of superior quality
ready mixed paint for steel work
1009 Extra for crimp curving for curved 0.5mm TCT

sq.m. 73.00
2 Galvalume/Zincalume sheets.
Providing and fixing in position 2mm thick one
1009 side embossed clear polycarbonate sheet in same
sq.m. 1917.00
3 profile to match the roofing sheets including self
tapping screws.
Providing & Fixing in position Double Skin roof
with Zincalume/ Galvalume colour coated & bare
profile sheet with subtle square fluting factory cut
1009 at all heights for roof, side & Gable cladding
sq.m. 2236.00
4 complete in all respect. TOP SHEET-The end rib
shall be designed for anti-capillary action. The
feed material should be manufactured out of
nominal 0.45 mm Base Metal Thickness (BMT),
Hi-strength steel with min. 550 MPa yield
strength, metallic hot dip coated with Aluminium-
Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si)
as per AS 1397 - Zincalume AZ150 (Min. 150
gms/sq.mt total on both sides) with quality paint
coat as per AS/NZS 2728 type 3-4. The paint shall
have a total coating thickness of nominal 35 μm,
comprising of nominal 20 μm exterior SMP coat
on top surface and nominal 5 μm reverse backer
coat on back surface over nominal 5 μm primer
coat on both surfaces of approved colour shade.
Total Coated Thickness (TCT) should be 0.50mm.
Total Painted Thickness (TPT) should be in
addition to 0.50mm. The steel sheet shall be
fastened with nominal 40 μm zinc coated or
nominal 25 μm zinc-tin alloy coated, Hex head,
self-drilling screw as per AS 3566-2002 Class 3
fasteners of approved make with EPDM washer as
per the requirement considering the profile shape
and design load. The fastener size shall be
calculated as per the design or manufacturers
recommendations.
The profile sheet, fastener size etc. shall be
approved by the Engineer. The sheeting should be
with minimum 200mm lap & waterproof with
Silicon sealant non-hardening neutral cure type
shall be applied at all end laps, complete as
directed Z-Sub Girt - roll formed section
50x50x50x1.50 TCT, 120GSM Galvanised, High
Strength (345 MPa), approximate Wt. 1.85 kg/r.m.
fixed with self tapping screws Glass Wool
Insulation with FSK facing 50mm with 24 kg/m3
density in between 2 sheets. LINER SHEET-bare
galvalume/zincalume roofing sheet of same
profile as top sheet. The feed material is of
manufactured out of nominal 0.45 mm Base Metal
Thickness (BMT) (0.47 mm TCT), Hi-strength
steel with min. 550 MPa yield strength, metallic
hot dip coated with Aluminium-Zinc alloy (55%
Aluminium, 45% Zinc) as per AS 1397 - Zincalume
AZ150 (Min. 150 gms/sq.mt total on both sides),
passivated & resin coated. The feed material
should have coil manufacturer’s product details
marked at regular interval for confirming
genuinity of the material. complete as per the
directions of the engineer. The steel
manufacturer's test certificate for the chemical &
mechanical properties of steel must be submitted
for approval prior to installation.
Providing and fixing tiled false ceiling of approved
materials of size 595x595 mm in true horizontal
level, suspended on inter locking metal grid of hot
dipped galvanized steel sections (galvanized @
120 grams/ sqm, both side inclusive) consisting of
main "T" runner with suitably spaced joints to get
required length and of size 24x38 mm made from
0.30 mm thick (minimum) sheet, spaced at 1200
mm center to center and cross "T" of size
24/15x25 mm made of 0.30 mm thick (minimum)
1009 sheet, 1200 mm long spaced between main "T" at

5 600 mm center to center to form a grid of
1200x600 mm and secondary cross "T" of length
600 mm and size 24x25 mm made of 0.30 mm
thick (minimum) sheet to be interlocked at middle
of the 1200x600 mm panel to form grids of
600x600 mm and wall angle of size 24x24x0.3
mm and laying false ceiling tiles of approved
texture in the grid including, required
cutting/making, opening for services like
diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main "T" runners to be suspended
from ceiling using GI slotted cleats of size 27 x 37
x 25/15 x1.6 mm fixed to ceiling with 12.5 mm dia
and 50 mm long dash fasteners, 4 mm GI
adjustable rods with galvanised butterfly level
clips of size 85 x 30 x 0.8 mm spaced at 1200 mm
center to center along main T, bottom exposed
width of 24/15 mm of all T-sections shall be pre-
painted with polyester paint, all complete for all
heights as per specifications, drawings and as
directed by Engineer.
GI Metal Ceiling Lay in plain Tegular/ Bevelled
edge Global white color tiles of size 595x595 mm,
and 0.4-0.5 mm thick with 8 mm drop; made of G I
sheet having galvanizing of 100 gms/sqm (both
a sq.m. 1319.00
sides inclusive) and electro statically polyester
powder coated of thickness 60 microns
(minimum), including factory painted after
bending.
GI Metal Ceiling Lay in perforated Tegular/
Bevelled edge global white color tiles of size
595x595 mm and 0.4-0.5 mm thick with 8 mm
drop; made of GI sheet having galvanizing of 100
gms/sqm (both sides inclusive) and 20%
perforation area with 1.8 mm dia holes and
b having NRC (Noise Reduction Coefficient ) of 0.5, sq.m. 1671.00
electro statically polyester powder coated of
thickness 60 microns (minimum), including
factory painted after bending and perforation, and
backed with a black Glass fiber acoustical fleece.
Providing and fixing GI Clip in Metal Ceiling

System of 600x600 mm module which includes
providing and fixing 'C' wall angle of size
20x30x20 mm made of 0.5 mm thick pre painted
steel along the perimeter of the room with help of
nylon sleeves and wooden screws at 300 mm
center to centre, suspending the main C carrier of
size 10x38x10 mm made of G.I steel 0.7 mm thick
1009
from the soffit with help of soffit cleat
6
37x27x25x1.6 mm, rawl plugs of size 38x12 mm
and C carrier suspension clip and main carrier
bracket at 1000 mm c/c. Inverted triangle shaped
Spring Tee having height of 24 mm and width of
34 mm made of GI steel 0.45 mm thick is then
fixed to the main C carrier and in direction
perpendicular to it at 600 mm centers with help of
suspension brackets. Wherever the main C carrier
and spring T have to join, C carrier and spring T
connectors have to be used. All sections to be
galvanized @ 120 gms/sqm (both side inclusive),
fixing with clip in tiles into spring 'T' with :
a) GI Metal Ceiling Clip in plain Beveled edge
global white colour tiles of size 600x600 and 0.4-
0.5 mm thick with 25 mm height, made of G I
sheet having galvanizing of 100 gms/sqm (both
a sq.m. 1668.00
sides inclusive) and electro statically polyester
powder coated of thickness 60 microns
(minimum), including factory painted after
bending.
b) GI Metal Ceiling Clip in plain Beveled edge

global white colour tiles of size 600x600 and 0.4-
0.5 mm thick with 25 mm height, made of G I
sheet having galvanizing of 100 gms/ sqm (both
b sides inclusive) and 20% perforation area with sq.m. 1849.00
1.8 mm dia holes and having NRC of 0.5, electro
statically polyester powder coated of thickness 60
microns (minimum), including factory painted
after bending and perforation.
Providing & Fixing of Aluminium Lay in Plain Tile
Ceiling on 24 /14 mm 'T' Framework of module
600mm X 600mm. Tiles of size 575mm X
575mm / 584mm x584mm made out of 0.6mm
thick Aluminium. The tile shall be manufactured
on advanced equipment, which includes several
leveling. The tile end shall be raised up ward &
bend outward to lay the tile in framework. The tile
shall be Polyester based, Powder coated in white
color. Grid system for fixing ceiling tiles shall
comprise of Tees. The 24 /14 mm main Tee
1009
runners shall be suspended at an interval of sq.m. 1720.00
7
1200mm centre to centre. The 24 /14 mm cross
runner shall be suspended at 600 mm center to
centre and further supported with 24 /14 mm
cross Tee at 600 mm centre to centre with
internal locking arrangements to form grid of
600mm X 600mm. The main Tee shall be
supported by means of 4mm GI rod from slab /
roof. The suspension shall be provided at
1200mm to 1500 mm centre to centre. Tee
framework would be made of GI and Powder
coated.
Providing & Fixing of Aluminium Lay-in
Perforated Tile Ceiling on 24 /14 mm ‘T’
Framework of module 600mm x 600mm. Tiles of
size 575mm X 575mm / 584mm x584mm made
out of 0.6mm thick Aluminium. Perforation of the
tiles shall be 2.5mm dia 5.5mm c/c. The Tile shall
be manufactured on advanced equipment, which
includes several levelling. The tile end shall be
raised upward by 38mm and bend outward to lay
the tile in framework. The Tile shall be Polyester
based, powder coated in white colour. Grid system
for fixing ceiling tiles shall comprise of Tees. The
1009 24 /14 mm main tee runners shall be suspended
sq.m. 1793.00
8 at an interval of 1200mm centre to centre. The
24 /14 mm cross tee runner shall be suspended at
600mm centre to centre and further supported
with 24 /14 mm cross tee at 600mm centre to
centre with interlocking arrangements to form
grid of 600mm x 600mm. The main tee shall be
supported by means of 4mm G.I. rod from
slab/roof. The suspension shall be provided at
1200 to 1500mm centre to centre. Tee framework
would be made of GI and Powder coated. Acoustic
Felt: Non-woven felt made of glass-reinforced
fibre glued over the perforation for sound
absorption.
Providing & Fixing of Metal Tile Ceiling System

comprising of Tile of 600mm wide and 600mm
long manufactured out of 0.6mm thick Aluminium
Clip-in Plain. The Tile shall be manufactured on
advanced equipment that includes several
levelling stages in the manufacturing process. Tile
ends shall be raised with pips and stops to ensure
positive engagement into the spring to enable for
1009
de-mounting of individual panels. The Tile sides sq.m. 1787.00
9
shall be sufficiently high to ensure a minimum
deflection across the length of Tile. All Tiles shall
be bevel edged. The Tile shall be Polyester based,
powder coated in white colour. The Tile shall be
clipped into clip in profile of 0.5mm thick G.I. The
clip in profile shall be supported from slab by
means of rigid suspension of 4mm G.I. Rod, Hold
on Clamp with Clip.
Providing & Fixing of Metal Tile Ceiling System
comprising of Tile of 600mm wide and 600mm
long manufactured of 0.6mm thick Aluminium
Clip-in perforated 2.5mm dia 5.5mm c/c. The Tile
shall be manufactured on advanced equipment,
which includes several levelling stages in the
manufacturing process. Tile ends shall be raised
with pips and stops to ensure positive
engagement into the spring to enable for de-
1010 mounting of individual panels. The Tile sides shall
sq.m. 1858.00
0 be sufficiently high to ensure a minimum
deflection across the length of Tile. All Tiles shall
be bevelled edged. The Tile shall be polyester
based, powder coated in White Colour. Tile shall
be clipped into clip in profile of 0.5mm thick G.I.
The clip in profile shall be supported from slab by
means of rigid suspension of 4mm G.I. Rod, Hold
on Clamp with Clip. Acoustic Felt: Non-woven felt
made of glass-reinforced fibre glued over the
perforation for sound absorption.
Providing and laying integral cement based

treatment (Box type) for water proofing on
horizontal surface at all depth below ground level
for under ground structures as directed by
Engineer and consisting of : i) Ist layer of 20 mm
to 25 mm thick approved and specified rough
stone slab over a 25 mm thick base of cement
mortar 1:3 (1 cement : 3 coarse sand) mixed with
water proofing compound conforming to IS:2645
1010 in the recommended proportion over the leveling
sq.m. 1502.00
1 course (leveling course to be paid separately).
Joints sealed and grouted with cement slurry
mixed with water proofing compound. ii) 2nd
layer of 25 mm thick cement mortar 1:3 (1
cement: 3 coarse sand) mixed with water proofing
compound in recommended proportions. iii)
Finishing top with stone aggregate of 10 mm to 12
mm nominal size spreading @ 8 cudm/sqm
thoroughly embedded in the 2nd layer using
rough Shahbad/Kotah stone.
Providing and laying integral cement based
treatment (Box type) for water proofing on the
vertical surface by fixing specified stone slab 20
mm to 25 mm thick with cement slurry mixed
with water proofing compound conforming to
IS:2645 in recommended proportions with a gap
of 20 mm (minimum) between stone slabs and the
1010 receiving surfaces and filling the gaps with neat
sq.m. 1776.00
2 cement slurry mixed with water proofing
compound and finishing the exterior of stone slab
with cement mortar 1:3 (1 cement : 3 coarse
sand) 20 mm thick with neat cement punning
mixed with water proofing compound in
recommended proportion complete at all levels
and as directed by Engineer using rough
Shahbad/Kotah stone.
Providing and fixing 15mm thick densified
tengular edged eco friendly light weight Calcium
Silicate false ceiling tiles (like Aerolite Brand or
Equivalent) of approved texture Spintone/
Cosmos/ Fine Fissured or equivalent of size
595mm x 595mm in true horizontal level,
suspended on inter locking metal grid of hot
dipped galvanized steel sections (galvanizing @
120 grams per square metre. including both side)
consisting of main "T" runner suitably spaced at
joints to get required length and of size 24x38mm
made from 0.33mm thick (minium) sheet, spaced
1200mm center to center, and cross "T" of size
24x28mm made of 0.33mm thick (Minimum)
sheet to be inter locked at middle of the
1010 1200x600mm panel to from grid of size on a
Sqm. 1841.00
3 Perimeter wall angle precoated steel of size
600x600mm, resting on periphery walls/
partitions (24x24x300mm) made of 0.40mm thick
(minimum) sheet with the help of rawl plugs at
450mm and laying 15mm thick densified edges
calcium silicate ceiling tiles of approved texture
light fittings, fixture, smoke detectors etc.,
wherever required. Main "T" runners to be
suspended from ceiling using G.I. slotted cleats of
size 25x35x1.6mm fixed to celing using with
12.5mm dia and 50mm long dash fastners, level
clips of size 85x30x0.8mm, spaced at 1200mm
center to center along main "T" bottom exposed
with 24mm of T-section shall be pre-painted with
polyester baked paint, for all heights, as per
specifications, drawings etc. complete.
(As Directed by Engineer in Charge)
Note: Only Calcium silicate false ceiling area will
be measured from wall to wall. No deduction shall
be made for exposed frames/ opening (cut outs)
having are less than 0.30 sqm. The Calcium
silicate ceiling tile shall have NRC value of 0.50
(Minimum), light reflection>85% non-
combustible as per B.S.476 part IV, 100%
humidity resistance and also having thermal
conductivity 0.043 w/m 0 KC.
Hospitals, Offices and Commercial Buildings,

Auditoriums and Cinema Hall, Educational

Institutions, R&D Centers, Studios, Laboratories,
Library, Canteen.
Providing and fixing JIELI BRAND or Equivalent

resin coated 3mm thk UPVC roof tiles sheets
1010
along with ridges/ valleys to required profile, Sqm. 1939.00
4
including accessories such as tapping screws etc.
excluding the cost of purlins rafter and trusses.
1010 Providing & Fixing L angle ridge for roof sheets
Each 769.00
5 includiing accessories
Providing & laying mangalore tiles roof covering
over M25 grade Precast Cement Concrete Rafters
placed @ 60cm C/C apart fixed with adhesive
1010
such as Bal endura, Sika etc. over sloping roof Sqm. 894.00
6
slabs & precast concrete Battens includiing all
material, labour, tools & plants all complete.(Cost
includes mangalore tiles, rafters & battens)
Providing & fixing colour coated Alluminium

(PUF) sandwich panel roofing systems of
approved make adhering to Aluminium 3105
grade for top & bottom sheet of thickness 0.40 &
0.35 respectively including PUF insulation
betewwn the top & bottom sheet of Denslity 40
(+/-2) Kg/m3 inclusive of S.S.304 grade self
1010
tapping fastneres, complete as directed by
7
Enigneer incharge (frame work for roof, roof
accesorries to be paid seperately) for tile Design
PUF roof panel, Gutter width should be atleast
25% more than the Crest width. Minimum height
at heighest point of Crest should be minimum
65mm. Minimum thickness at anygiven point
should not be below 30mm.
PUF Insulated tile roof 30mm thick of trapezoidal
a design Sqm. 2536.00
PUF Insulated tile roof 50mm thick of trapezoidal
b design Sqm. 2822.00
c PUF Insulated Porto tiles series 50mm thick. Sqm. 3013.00
Providing & Fixing Alluminium Barge Board of
approved make adhering to Alluminium 3105
grade of 0.71mm thickness & 60 cm wide
10108 Rmt. 798.00
inclusive of SS304 grade self tapping fastners, to
match the Alluminium roofing system & as
directed by Engineer in charge complete
Providing & Fixing Alluminium Ridge of approved

make adhering to Alluminium 3105 grade of
0.71mm thickness & 60 cm wide inclusive of
10109 Rmt. 798.00
SS304 grade self tapping fastners, to match the
Alluminium roofing system & as directed by
Engineer in charge complete
Providing & Fixing Alluminium Corner flashing/

Gutter Valley of approved make Alluminium 3105
grade of 0.71mm thickness & 60 cm wide
10110 Rmt. 798.00
inclusive of SS304 grade self tapping fastners, to
match the Alluminium roofing system & as
directed by Engineer in charge complete
Providing & Fixing Alluminium 30mm

Trapezhoidal End Cap for PUF Roofing of
approved make of Alluminium AA 3105 grade
10111 matching with 30mm PUF panel profile including Rmt. 211.00
the required fastners etc. Complete for
Alluminium PUF Roofing System & as directed by
Engineer in charge.
Providing & Fixing Alluminium 50mm

Trapezhoidal End Cap for PUF Roofing of
approved make of Alluminium AA 3105 grade
10112 matching with 50mm PUF panel profile including Rmt. 252.00
the required fastners etc. Complete for
Alluminium PUF Roofing System & as directed by
Engineer in charge.
Providing & Fixing Alluminium Tile Profile End

Cap for PUF Roofing of approved make of
Alluminium AA 3105 grade End Cap matching
10113 with Tile Profile PUF roof Panel including the Rmt. 252.00
required fastners etc. Complete for Alluminium
PUF Roofing System & as directed by Engineer in
charge.
CHAPTER XIV
PLASTERING AND FINISHING WORKS
SR.
NO.
1100 Lime punning with lime mortar 1:1 (1 lime putty :
sq.m 81.00
1 1 fine sand)
1100
Finishing fine with neeru over plaster sq.m 49.00
2
1100
12mm cement plaster 1:3 (1 cement : 3 fine sand) sq.m 238.00
3
1100
4
1100
5
1100
6
1100 15mm cement plaster 1: 3 (1 cement : 3 fine sand)

sq.m 275.00
7 on the rough side of single or half brick wall.

sq.m 257.00

sq.m 248.00

sq.m 239.00
1101
20mm cement plaster 1: 3 (1 cement : 3 fine sand) sq.m 357.00
1
1101
2
1101
3
1101
4
1101 6mm cement plaster to ceiling 1: 3 (1 cement : 3
sq.m 182.00
5 fine sand)
1101 6mm cement plaster to ceiling 1: 4 (1 cement : 4
sq.m 172.00
6 fine sand)
Extra for plaster to ceiling above 5m height from
1101
floor level for every additional height of one meter sq.m 107.00
7
or part there of.
1101 Neat Cement punning sq.m 58.00
8
1101
Extra for plastering spherical ceiling sq.m 83.00
9
1102
Extra for plastering groined ceiling sq.m 96.00
0
1102
Extra for plastering flowing soffits. sq.m 65.00
1
1102 12mm cement plaster 1:3 (1 cement : 3 coarse
sq.m 238.00
2 sand)
sq.m 223.00
3 sand)
sq.m 217.00
4 sand)
sq.m 208.00
5 sand)
1102 15mm cement plaster 1: 3 (1 cement: 3 coarse
sq.m 275.00
6 sand) on the rough side single or half brick wall.
sq.m 257.00
sq.m 248.00
sq.m 239.00
1103 20mm cement plaster 1: 3 (1 cement : 3 coarse
sq.m 361.00
0 sand)
sq.m 331.00
1 sand)
sq.m 318.00
2 sand)
sq.m 307.00
3 sand)
1103 12mm cement plaster 1: 3 (1 cement ; 3 coarse

sq.m 294.00
4 sand) finished with a floating coat of neat cement.
Extra for providing and mixing water proofing

material proportion recommended by the
manufacturers.
a 12mm cement plaster 1: 3 (1 cement : 3 sand) sq.m 10.00
1103
b 12mm cement plaster 1: 4 (1 cement : 4 sand) sq.m 8.00
5
c 15mm cement plaster 1: 3 (1 cement : 3 sand) sq.m 11.00
d 15mm cement plaster 1: 4 (1 cement : 4 sand) sq.m 8.00
e 20mm cement plaster 1: 3 (1 cement : 3 sand) sq.m 12.00
f 20mm cement plaster 1: 4 (1 cement : 4 sand) sq.m 10.00
18mm cement plaster in two coats under layer
12mm thick cement plaster 1:5 ( 1 cement : 5
1103
coarse sand) and top layer 6mm thick with sq.m 329.00
6
cement plaster 1: 3 (1 cement : 3 coarse sand)
finished with sponge.
Extra for plastering exterior walls of height more
1103
than 10m from ground level for every additional sq.m 49.00
7
height of 3m or part thereof.
Extra for plastering on circular work not
1103
exceeding 6m in radius
8
a In one coat sq.m 34.00
Extra for plastering done on mouldings, cornices,
1103 or arch it raves including neat finish to line and
9 level.
a In one coat sq.m 338.00
18mm plastering with terrazzo finish rubbed and
polished complete, under layer 12mm thick
cement plaster 1: 3 (1 cement : 3 coarse sand) and
top layer 6mm thick white black or white and
1104
black marble chips of 3mm and down size laid in sq.m 599.00
0
cement marble powder mix 3: 1 (3 cement : 1
marble powder) by weight in proportion of 4:7 (4
cement marble / powder mix: 7 marble chips) by
volume.
1104 12mm thick plain cement mortar bands in cement

1 mortar 1:4 (1 cement: 4 fine sand)
1 meter long, 1 cm wide Each 77.00
1104 18mm thick plain cement mortar bands in cement

2 mortar 1:4 (1 cement : 4 fine sand)
1 meter long, 1 cm wide Each 80.00

12mm thick moulded cement mortar bands in
1104
cement mortar 1:4 (1 cement : 4 fine Each 92.00
3
sand) cm per meter
18mm thick molded cement mortar bands in
1104
cement mortar 1:4 (1 cement : 4 fine Each 95.00
4
sand) cm per meter
18mm pebble dash plastering under layer 12mm
thick cement plaster 1: 3 (1 cement: 3 coarse
1104
sand) and top layer 6mm thick cement plaster 1: 4 sq.m 455.00
5
(1 cement : 4 coarse sand) with pebbles of
nominal size 3mm to 10mm
Rough cast plaster with a mixture of sand and
gravel or crushed stone from 2.36mm to 12.5mm
nominal size dashed over and including fresh
plaster in two layer 12mm cement plaster 1:4 (1
1104
cement : 4 coarse sand) and top layer 10mm
6
cement plaster 1: 3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by
volume of cement.
a Natural cement finishing using ordinary cement sq.m 589.00
Pebble dash plaster with a mixture of washed

pebble or crushed stone 6mm to 12.5mm nominal
size dashed over and including fresh plaster in
1104 two layer, under layer 12mm cement plaster 1: 4
sq.m 490.00
7 (1 cement : 4 coarse sand) and top layer 10mm
cement plaster with cement mortar 1: 3 (1
cement: 3 fine sand) mixed with 10% finely
ground hydrated lime by volume of cement.
Pointing on brick work with cement mortar 1: 3

(1 cement : 3 fine sand)
1104
a Flush pointing sq.m 141.00
8
b Ruled pointing sq.m 145.00
c Raised and cut pointing sq.m 222.00
Pointing on stone work, with cement mortar 1: 3

(1 cement: 3 fine sand)
1104
a Flush pointing sq.m 201.00
9
b Ruled pointing sq.m 201.00
c Raised and cut pointing sq.m 347.00
Extra for painting on walls on the outside at
1105
height more than 10m from ground level for every sq.m 13.00
0
additional height of 3.0 m or part thereof.
1105 White washing with lime on new work ( three or
sq.m 56.00
1 more coats) to give an even shade.
1105 White washing with lime on old work ( two or
sq.m 47.00
2 more coats) to give an even shade.
1105 White washing with whiting on new work ( three
sq.m 58.00
3 or more coats) to give an even shade.
1105 White washing with whiting on old work(two or
sq.m 38.00
4 more coats) to give an even shade
1105 White washing with whiting on old work ( one
sq.m 24.00
5 coat) to give an even shade.
Colour washing such as green, blue or buff on
1105 new work ( two or more coats) including a base
sq.m 66.00
6 coat of white washing with lime to give an even
shade.
Colour washing such as green, blue or buff with
1105
lime on old work (two or more coats) to give an sq.m 48.00
7
even shade.
Colour washing such as green, blue or buff on
1105 new work ( two or more coats) including a base
sq.m 63.00
8 coat of white washing with whiting to give an
even shade.
Removing white or colour wash by scrapping,
1105 sand papering and preparing surface smooth
sq.m 19.00
9 including necessary repairs to scratches etc.
complete.
Distempering with dry distemper of approved
1106 brand and manufacturer two or more coats of
sq.m 91.00
0 required shade on new work over and including
priming coat of whiting to give an even shade.
Distempering with dry distemper of approved

1106
brand and manufacturer one or more coats of sq.m 47.00
1
required shade on old work to give an even shade.
Distempering two or more coats with oil bound

washable distemper of approved brand and
1106 manufacture and of required shade on new work
sq.m 124.00
2 over and including a priming coat with distemper
primer of approved brand and manufacture to
give an even shade.
Distempering (one/ more coat) with oil bound
1106 washable distemper of approved brand and
sq.m 44.00
3 manufacture and of required shade on old work to
give an even shade.
1106 Applying one coat of cement primer of approved
sq.m 53.00
4 brand and manufacture on wall surface.
1106 Applying one coat of distemper primer of

sq.m 51.00
5 approved brand and manufacture on wall surface.
Finishing wall with waterproofing cement paint of

1106 approved brand and manufacture and of required
sq.m 73.00
6 shade on new work (three or more coats) to give
an even shade.
Finishing wall with waterproofing cement paint of
1106 approved brand and manufacture and of required
sq.m 48.00
7 shade on old work (one or more coats) to give an
even shade.
Finishing wall with superior quality
1106 waterproofing cement paint (super snow hem or
sq.m 103.00
8 equivalent) of required shade on new work
(three or more coats) to give an even shade.
Finishing wall with superior quality
1106 waterproofing cement paint (super snow hem or
sq.m 47.00
9 equivalent) of required shade on old work (three
or more coats) to give an even shade.
Removing dry or oil bound distemper by
1107 scrapping sand papering and preparing the
sq.m 22.00
0 surface smooth including necessary repairs to
scratches etc. complete.
1107 Painting 2 coats with oil type wood preservative

sq.m 52.00
1 of approved brand & manufacture on new work.
1107 Painting 1 coat with oil type wood preservative

sq.m 44.00
2 of approved brand & manufacture on old work.
Coal tarring two coats on new work using 0.16
1107
and 0.12 liter of coal tar per sq.m. in the first coat sq.m 116.00
3
and second respectively.
1107 Coal tarring one coat on old work using 0.12 liter
sq.m 65.00
4 of coal tar per sq.m.
Applying priming coat consisting of a mixture of
1107 red lead, white lead and double boiled linseed oil
sq.m 97.00
5 in the ratio of 0.7 kg. 0.7 kg. 1 litre on wood work
complete.
Applying priming coat with ready mixed primer of
1107
approved brand and manufacture on wood work sq.m 58.00
6
complete.
1107 Applying priming coat with ready mixed primer of

sq.m 51.00
7 approved brand and manufacture on steel work.
Applying priming coat with ready mixed red lead

1107
paint of approved brand and manufacture on steel sq.m 49.00
8
work.
Painting two or more coats (excluding priming
coat) with ordinary ready mixed paint of
1107
approved brand & manufacture in all shades sq.m 105.00
9
except white or green on new work to give an
even shade.
Painting one/ two more coats with ordinary
1108 ready mixed paint of approved brand &
sq.m 72.00
0 manufacture in all shades except white or green
on old work to give an even shade.
1108 coat) with superior quality ready mixed paint for
sq.m 107.00
1 steel work of approved brand & manufacture in all
shades on new work to give an even shade.
Painting one or more coats with superior quality
1108 ready mixed paint of steel work of approved
sq.m 73.00
2 brand & manufacture in all shades on old work to
give an even shade.
1108 coat) with superior quality ready mixed paint for
sq.m 101.00
3 wood work of approved brand & manufacture in
all shades on new work to give an even shade.
Painting one or more coats with superior quality
1108 ready mixed paint of wood work of approved
sq.m 72.00
4 brand & manufacture in all shades on old work to
give an even shade.
Paints two coats on G. I. Sheet with superior

1108
quality ready mixed paint of approved brand and sq.m 92.00
5
manufacture on new work to give an even shade.
Painting one or more coats on G.I. sheets with

1108 superior quality ready mixed paint of approved
sq.m 61.00
6 brand and manufacture on old work to give an
even shade.
Spray painting with flat wall paints of approved
brand and manufacture two or more coats on new
1108
work including priming coat of distemper primer sq.m 151.00
7
of approved brand and manufacture to give an
even shade.
Painting (two or more coats) with synthetic

enamel paint of approved brand and manufacture
1108
in all shade or new work over and under coat of sq.m 161.00
8
suitable shade with ordinary paint of approved
brand and manufacture to give an even shade
Painting (one or more coats) with synthetic

1108
enamel paint of approved brand and manufacture sq.m 72.00
9
in all shades on old work to give an even shade.
Painting (two or more coats) with aluminium
1109
paint of approved brand and manufacture on new sq.m 95.00
0
work to give an even shade.
Painting (one or more coats) with aluminium
1109
paint of approved brand and manufacture on old sq.m 67.00
1
work to give an even shade.
Painting (two or more coats) with acid proof
1109 paint of approved brand and manufacture in
sq.m 68.00
2 chocolate or black shade on new work to give an
even shade.
Painting (one or more coats) with acid proof
1109 paint of approved brand and manufacture in
sq.m 49.00
3 chocolate or black shade on old work to give an
even shade.
Painting (two or more coats) with black
1109 anticorrosive bitumastic paint of approved brand
sq.m 80.00
4 and manufacture on new work to give an even
shade.
Painting (one or more coats) with black
1109 anticorrosive bitumastic paint of approved brand
sq.m 57.00
5 and manufacture on old work to give an even
shade.
Painting (one or more coats) with black japan
1109
paint of approved brand and manufacture to give sq.m 70.00
6
an even shade.
Wall painting (two or more coats) with plastic
1109
emulsion paint of approved brand and sq.m 114.00
7
manufacture on new work to give an even shade.
Wall painting (one or more coats) with plastic
1109
emulsion paint of approved brand and sq.m 79.00
8
manufacture on old work to give an even shade.
Varnishing (two or more coats) with copal varnish

of approved brand and manufacture on new work
including an under coat Bees waxing on wood
1109 work with local made wax polish in proportion of
9 2:1 5:1 0.5 (2 wax: 1.5 linseed oil: 1)
a With glue sizing sq.m 168.00

b With transparent wood filler. sq.m 163.00
Varnishing with (1 or more coats) with copal
1110
varnish of approved brand & manufacture on old sq.m 76.00
0
work.
1110 Oiling (two or more coats) with raw linseed oil on
sq.m 65.00
1 new work.
1110 Oiling (one or more coats) with raw linseed oil on
sq.m 51.00
2 old work.
Bees waxing on wood work with local made wax
1110 polish in proportion of 2:1 5:1 : 0.5 (2 wax : 1.5
sq.m 120.00
3 linseed oil 1 turpentine oil, 0.5 varnish by weight)
on new work.
Bees waxing on wood work with local made wax
1110 polish in proportion of 2:1 5:1 : 0.5 (2 bees wax :
sq.m 75.00
4 1.5 linseed oil 1 turpentine oil, .5 varnish by
weight) on old work.
Polishing on wood work with ready made
1110
superior quality wax polish of approved brand sq.m 121.00
5
and manufacture on new work.
Polishing on wood work with ready made
1110
superior quality wax polish of approved brand sq.m 69.00
6
and manufacture on old work.
Floor polishing on masonry or concrete floors
1110
with superior quality wax polish of approved sq.m 64.00
7
brand and manufacture.
Painting (two or more coats) on rain water, soil,
waste & vent pipes and fittings with black anti-
corrosive bitumanstic paint of approved brand
1110 and manufacture over a priming coat of ready
8 mixed genuine red lead on new work:
a 50mm diameter pipes Metre 31.00
b 75mm diameter pipes Metre 41.00
Painting (one or more coats) on rain water, soil,
waste & vent pipes and fittings with black anti-

corrosive bitumanstic paint of approved brand
1110 and manufacture on old work:
9 a 50mm diameter pipes Metre 24.00
c 100mm diameter pipes Metre 27.00
d 150mm diameter pipes Metre 34.00
Painting (two or more coats) on rain water, soil,
waste & vent pipes and fittings with aluminium
paint of approved brand and manufacture over a
priming coat of ready mixed genuine red lead on
1111 new work:
0
a 50mm diameter pipes Metre 36.00
Painting (one or more coats) on rain water, soil,
waste & vent pipes and fittings with aluminium

paint of approved brand and manufacture on old
1111 work:
1 a 50mm diameter pipes Metre 24.00
1111 Lettering with black japan paint of approved

2 brand and manufacture.
cm
*1 Letter of 1 cm height. height / 49.00
letter
1111 Re-lettering with black japan paint of approved

3 brand and manufacture.
cm
*1 Letter of 1 cm ht. height / 39.00
letter
Removing old paint of polish with paint remover
1111
of approved brand & manufacture & preparing sq.m 11.00
4
surface
1111 Removing old paint with blow lamp and preparing
sq.m 14.00
5 surface
Providing and applying Synthetic elastomeric
coating cum paint of reputed make such as
Polysafe or equivalent conforming to relevant IS
specification ready to use for bridge structures in
saline atmosphere as to avoid salt concentration
from marine environment, ultra-violet effects of
the sun rays, fungus development and to protect
1111
the reinforcement from marine atmoshpheric sq.m 568.00
6
effects in 3 coats including sand blasting, cleaning
the concrete surfaces brushing and applying the
polymerbased chemical coating with PRIMER,
1ST COAT and SECOND COAT at an interval of 24
hrs in approved shade and colour including
scaffolding etc. (as directed by the Engineer-in-
charge) complete with 5 yrs guarantee).
Painting three or more coats with acryllic exterior
paint of approved brand and manufacture (Such
1111
as Dulex/ Asian Paints/ Sherwin Willians) sq.m 208.00
7
including applying one coat of cement primer and
one coat of surface treatment etc. complete.
Painting one or more coats of acryllic exterior
1111 paint of approved brand and manufacture(Such as
sq.m 114.00
8 Dulex/ Asian Paints/ Sherwin Willians) on old
work including cleaning the surface with water
etc. complete.
Providing and applying white cement based
putty of average thickness 1.00mm of approved
1111
brand and manufacturer, over the plastered wall sq.m. 89.00
9
surface to prepare the surface even and smooth
complete.
Applying breathable, non-reactive, antifungal, and
water repellant Silane/ Siloxane chemical as
approved by Archaeological Survey of India/
Engineer, of approved brand and manufacture,
diluted with solvent mineral Turpentine oil in the
1112
ratio of 1:12 (One part of approved chemical :12 sq.m. 67.00
0
Part of Turpentine oil), on the exposed laterite
masonry surface with two or more coats to give
uniform application of chemical on the surface, all
complete as per direction of Engineer. (The rate is
inclusive of all materials & labours).
Melamine polishing on wood work (one or more

1112 coat)
1 a Glossy sq.m. 991.00
b Matt sq.m. 1040.00
CHAPTER XV
DISMANTLING DEMOLISHING & REPAIRS WORK
SR.
NO.
Repairs to plaster in patches of 2.5 sq.m. and

under including cutting the patch in proper shape
1200
and preparing and plastering the surface of the
1
walls complete including disposal of rubbish to
the dumping ground within 50m lead.
With cement mortar 1:4 (1 cement : 4 fine sand) sq.m 314.00

Fixing doors chowkhat in existing opening
including embedding chowkhats in floor, cutting
masonry for hold fasts embedding hold fast in
cement concrete blocks with cement concrete
1200 1:3:6 (1 cement ; 3 coarse sand : 6 graded stone
Each 898.00
2 aggregate 20mm nominal size) painting two coats
of coal tar to sides of chowkhats and making good
the damages to walls & floors complete including
disposal of rubbish to the dumping ground within
50mts. lead.
Fixing windows chowkhat in existing opening

including cutting masonry for hold fasts
embedding hold fast in cement concrete blocks
with cement concrete 1:2:4 (1 cement : 2 coarse
1200
sand : 4 graded stone aggregate 20mm nominal Each 770.00
3
size) painting two coats of coal tar to sides of
chowkhats and making good the damages to walls
complete including disposal of rubbish to the
dumping ground within 50mts. lead.
Fixing clerestory windows chowkhat in existing

opening including cutting masonry for hold fast
embedding hold fast in cement concrete blocks
with cement concrete 1:3:6 (1 cement ; 3 coarse
1200
sand : 6 graded stone aggregate 20mm nominal Each 740.00
4
size) painting two coats of coal tar to sides of
chowkhats and making good the damages to walls
dumping ground within 50mts. lead.
Providing and fixing wooden cleats to doors and

windows with the approved fittings including
1200
removal of old cleats where necessary including
5
painting, polishing of bees waxing to match the
existing shade.
1st class or 2nd class indian teak wood cleats with
a Each 229.00
brass hinges and screws.
1st class or 2nd class teak wood cleats with iron
b Each 115.00
hinges and screws.
Supplying and fixing glass panes with putty and
nails including removal of broken glass panes
1200 wherever necessary
6 a Glass panes 2mm thick` sq.m 880.00
b Glass panes 3mm thick sq.m 931.00
c Frosted glass panes 2mm thick sq.m 1208.00
Supplying and fixing new wooden fillets wherever

1200 necessary
7 a 1st class teak wood fillets. Metre 52.00
b 2nd class Indian teal wood fillets Metre 48.00
1200
Removal of old putty of glass panes Metre 32.00
8
1200
Refixing of old glass panes with putty and nails sq.m 376.00
9
Supplying and fixing glass panes with wooden
fillets including removal of broken glass panes

and old wooden fillet wherever necessary but
1201 excluding the cost of wooden fillets.
0
a Glass panes 2mm thick. sq.m 881.00
Laying manglore roofing tiles, ridges, valleys etc.
1201
complete on roofs over existing battens rafters sq.m 97.00
1
etc. (Tiles to be issued by the department).
Renewing wooden battens in roofs including
making good the holes in walls & painting with oil
1201 type wood preservative of approved brand and

2 manufacture complete including removal of
rubbish to the dumping ground within 50 meter
lead :
Jamba wood beams cu.m 64165.00
Renewing wooden beams not exceeding 4.00 in
length in roofs including making good the holes in
1201 walls & painting with oil type wood preservative

3 of approved brand and manufacture complete
including removal of rubbish to the dumping
ground within 50 meters. Lead :
Second class matti wood beams cu.m 104149.00
Renewing wooded beams (above 4mt. upto 5 mt.
length in roofs including making good the holes
1202 in walls and painting with oil type wood

1 preservative of approved brand and manufacture
dumping ground within 50 meters lead.
Second class matti wood beams cu.m 105893.00
Dismantling old plaster or skirting raking out
1202 joints and cleaning the surface for plaster
sq.m 27.00
2 including disposal of rubbish to the dumping
ground within 50 mts. lead.
Raking out joints in lime or cement mortar and
1202 preparing the surface for repainting or
sq.m 35.00
3 replastering including disposal of rubbish to the
dumping ground within 50 mts. lead.
Providing and fixing M.S. fan clamps of standard
1202 shape and size in existing R.C.C. slab including
each 334.00
4 cutting chase and making good and painting
exposed portion of the clamps complete.
Supplying and fixing glass panes with new
wooden fillets including removal of broken glass

panes and old wooden fillets, wherever
1202 necessary .
5
a Glass panes 2mm thick sq.m 1245.00
Supplying and fixing 3mm thick acrylic sheet with

1202
putty nails, in door/ window shutters including sq.m 1455.00
6
removal of broken glass pane wherever necessary.
1202 Demolishing lime concrete & disposal of material

cu.m 420.00
7 within 50 mts. lead.
1202 Demolishing cement concrete 1:3:6 or richer mix
cu.m 1122.00
8 including disposal of material within 50 m lead.
1202 Demolishing cement concrete 1:4:8 or leaner mix

cu.m 710.00
9 including disposal of material within 50 m lead.
Demolishing R.C.C. work including stacking of

1203
steel bars & disposal of unserviceable within 50 cu.m 1618.00
0
mts. lead.
Demolishing R.B. work including stacking of steel
1203
bars & disposal of unserviceable material within cu.m 1455.00
1
50 mts. lead
1203 Extra for cutting reinforcement bars in R.C.C. or
sq.m 545.00
2 R.B. work
Extra for scraping, cleaning and straightening
1203
reinforcement from R.C.C. or reinforced brick qtl 410.00
3
work
Demolishing brick work in mud mortar including
1203
stacking of serviceable and disposal or sq.m 355.00
4
unserviceable material within 50 mts. lead.
Demolishing brick work in lime mortar with old
1203 mughal bricks including stacking of serviceable
cu.m 837.00
5 material & disposal of unserviceable material
within 50 mts. lead.
Demolishing brick work in cement mortar
1203 including stacking of serviceable material &
cu.m 958.00
6 disposal of unserviceable material within 50 mts.
lead.
1203 Removing mortar from & cleaning bricks (stacks
cu.m 1671.00
7 of cleaned bricks will be measured)
Demolishing laterite stone masonry in cement
1203 mortar including stacking of serviceable material
cu.m 1136.00
8 & disposal of unserviceable material within 50
mts. lead.
Dismantling dressed stone work ashlar face stone
work, marble work or precast concrete work in
1203
cement mortar including stacking of serviceable cu.m 1324.00
9
material and disposal of unserviceable material
within 50mts. lead.
Dismantling wood work of sectional area 40
sq.cm. and above wrought framed and fixed in
1204
frames, other frames and trusses including cu.m 2056.00
0
stacking of material within 50 mts. lead (span
upto 10 mtrs.)
Dismantling wood work of area below 40 sq.cm.
1204 wrought framed and fixed in frames, other frames
Metre 12.00
1 and trusses including stacking of material within
50 mts. lead
Dismantling doors, windows and clearestory
windows (steel or wood) shutters including

1204 chowkhats architrave holdfast etc. complete and
2 staking within 50 mt. Lead
a Of area 3 sq.m. and below each 206.00
b Area beyond 3 sq.m. each 266.00
Taking out doors, windows and clerestory
windows shutters (steel or wood) including
1204 stacking within 50 mts. lead
3
a Of area 3 sq.m. and below Each 105.00
b Area beyond 3 sq.m. Each 126.00
Extra for dismantling trusses, rafters, purlins etc.
of wood work for every additional span of 1 mt. of
1204 part thereof beyond 10 meters.
4
a Sectional area 40 sq. cms. And abvoe cu.m 289.00
b Sectional area below 40 sq. cm.s cu.m 12.00
of wood work for every additional height of 1 mt.
or part thereof Dismantling steel work in single
1204 sections in R.S., joists including dismembering and
5 staking within 50mts. lead
a Sectional area 40 sq.cm. and above cu.m 446.00
b Sectional area below 40 sq.cms. cu.m 57.00
Dismantling steelwork in single sections in R.S.,
1204
joists including dismembering and stacking within qtl 192.00
6
50 mts. lead
Dismantling steelwork in single sections in
1204
channels, angles, tees and flats including qtl 147.00
7
dismembering and stacking within 50 mts. lead
Dismantling steelwork in built up sections in
1204 angles, tees, flats and channels including all gusset
qtl 293.00
8 plates bolts, nuts, cutting dismembering and
staking within 50 mts. lead
Dismantling steel work in built up sections
1204
excluding dismembering & stacking within 50 qtl 212.00
9
mts. lead.
1205
of steel work, for every additional span of one qtl 80.00
0
meter or part thereof beyond 10 mts.
1205
of steel work, for every additional height of one qtl 80.00
1
meter or part thereof beyond 5 mts.
1205 Extra for making structural steel work required to
qtl 224.00
2 be reerected
Dismantling the tile work in floors and roofs laid
1205 in cement including stacking of materials within
sq.m 330.00
3 50 meters lead for thickness of tiles 10mm to
25mm.
Demolishing dry bricks, pitching in floors drains
1205
etc., including stacking of serviceable and disposal cu.m 626.00
4
of unserviceable material within 50 mts. lead.
Dismantling G.I. sheets roofing including ridges,

1205
hips valleys and gutters etc. and stacking the sq.m 78.00
5
material within 50 meters lead.
Dismantling asbestos sheet roofing including
1205
ridges, hips valley and gutters and stacking the sq.m 38.00
6
material within 50 meters lead.
Dismantling and removing mangalore roofing tiles
from roofs including ridges, hips, valleys, sheets
1205
wind ties etc. but excluding battens, roof timber sq.m 52.00
7
etc. and stacking materials within a distance of
50 mt.
Dismantling tiled roofing (mangalore or pot or

1205 country tiles) with battens etc. complete including
sq.m 79.00
8 stacking of serviceable material & disposal of
unserviceable material within 50 mts. lead.
Demolishing thatch roofing including mats

1205 bamboo jafari etc. complete including stacking of
sq.m 36.00
9 serviceable material and disposal of unserviceable
material within 50 mts. lead.
1206 Dismantling ballies in posts purlins or rafters
Metre 54.00
0 including stacking within 50 meters lead.
Dismantling G.I. or asbestos rain water pipes with
1206
fittings and clamps including stacking the material
1
within 50 mts. lead.
75mm to 150 mm dia. Metre 38.00
Dismantling barbed wire or flexible wire rope in
1206
fencing including making rolls and stacking within qtl 1679.00
2
50 meters lead.
Dismantling wooden trellies work in position
1206
excluding frames but including stacking the sq.m 33.00
3
serviceable material within 50 meters lead.
Dismantling expanded metal or hard drawn steel
1206 wire with necessary battens & bending including
sq.m 42.00
4 stacking the serviceable material within 50 mts.
lead.
Dismantling wooden boarding in linings of walls &
1206 partitions excluding supporting members but
5 including stacking within 50 meters lead.
a Upto 19mm thick sq.m 31.00
b Thickness above 19mm and upto 25mm sq.m 38.00
c Thickness above 25mm and upto 38mm sq.m 43.00
Dismantling precast concrete or stone slabs in
1206
walls, partition walls etc. including stacking
6
within 50 meters lead.
Thickness upto 38mm sq.m 132.00
Thickness above 38mm and upto 75mm sq.m 196.00
Dismantling cement asbestos celotex or other
1206 ceiling or partition hard broad wall including
sq.m 29.00
7 stacking of serviceable materials and disposal of
unserviceable materials within 50 mts. lead.
Dismantling and stacking with in 50 meters lead
fencing posts or struts including all earth work
1206 and dismantling of concrete etc. in the base of:
8
a T or l iron or pipes Each 187.00
b R.C.C. Each 315.00
Cutting ballies or wooden posts of fencing at the
1206
point of projection above the concrete or ground Each 38.00
9
& stacking the same within 50 mts. lead.
Dismantling rolling shutters, top covers and shafts
etc. for replacement of springs ball bearing
complete and refixing the shutter after
1207
replacement of springs and ball bearing (cost of sq.m 245.00
0
replacement parts excluded) including all labour
and returning the unserviceable parts to the
department complete.
Dismantling of existing G.I pipe including disposal
1207
of unserviceable material and stacking of
1
serviceable materials .
a Upto 20 mm nominal bore Metre 10.00
Removing and refixing of door/ window shutters
1207 paneled or paneled and glazed including

2 replacing of existing hionges chiseling etc
complete as directed by Engineer- in – charge
a Below 1 Sq.m area sq.m 1451.00
b Above 1 Sq.m area sq.m 1817.00
CHAPTER XVI
LANDSCAPING & HORTICULTURE WORK
SR.NO. DESCRIPTION UNIT RATE
Supplying and stacking of good earth at site
including royalty and carriage upto 1 km. (earth
13001 cu.m 578.00
measured in stacks will be reduced by 20% for
payment).
Rough dressing the trenched ground including
13002 100 sq.m 135.00
breaking clods.
13003 Fine dressing the trenched ground. 100 sq.m 275.00
Spreading of sludge, dung manure or/and good

13004 earth in required thickness (cost of sludge, dung cu.m 74.00
manure or/and good earth to be paid separately).
1) Grassing with “doob” grass including watering

and maintenance of the lawn for 30 days or more
till the grass forms of thick lawn free from weeds
and fit for moving, including supplying good earth
13005 if needed. (Cost of “doob” grass not included )
a 2) In rows 15 cm apart in either direction. 100 sq.m 392.00
b 2) In rows 7.5 cm apart in either direction. 100 sq.m 654.00
c 3) In rows 5 cm apart in either direction 100 sq.m 884.00
Digging holes in ordinary soil and refilling the
same with the excavated earth mixed with
manure or sludge in ratio of 2: 1 by volume (2
parts or stacked volume of earth after reduction
by 20% and 1 part of stacked volume of manure
13006
after reduction by 40%) flooding with water,
dressing including removal of rubbish & surplus
earth if any with all leads & lifts (cost of manure
or sludge of extra good earth if needed to be paid
for separately)
Holes 1.2m dia and 1.2m deep Each 550.00
Providing and fixing M.S. flat iron tree guard
60cm dia & 2 m high above ground level, formed
of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical
M.S. flat iron rings in two halves, bolted together
13007 Each 4255.00
with 8mm dia and 30 mm long bolts including
painting two coats with paint of approved brand
and manufacture over a coat of priming, complete
in all respects.
Making tree guard 53cm dia and 1.5m high as per
design from empty coat tar drums supplied from
by the department including providing and fixing
13008 Each 664.00
2 nos. M.S. Sheet rings 50 x 0.5 mm with rivets
complete in all respects including painting inside
outside of tree guard with a) A coat of Coal tar
Filling mixture of earth & sludge or manure in the

desired proportion in trenches flooding with
13009 cu.m 117.00
water and leveling (cost of supplying earth and
sludge of manure and mixing excluded).
Excavation in dumped stones or mulba including
stacking of serviceable & unserviceable material
13010 separately & disposal of unserviceable material cu.m 328.00
lead upto 50m and lift upto 1.5m disposed
material to be neatly dressed.
Excavation in water bound macadam road
including stacking of serviceable & unserviceable
13011 material separately & disposal of unserviceable cu.m 449.00
material lead upto 50m and lift upto 1.5m
disposed material to be neatly dressed.
Tree guards made up of four panels of R.C.C. grade
M 20 suitable reinforced (reinforcement not less
than 7.20 kg) with smooth form finish size
13012 Each 1136.00
1800mm x 600mm x 600mm with panel thickness
of 40 mm provided with 14 SWG G.I. wire at top
for tying (set of four panels
CHAPTER XVII
WATER SUPPLY SEWERAGE, PLUMBING & SANITATION WORK
PLUMBING & SANITATION WORKS
SR.
NO.
Proving and fixing white vitreous china water
closet squatting pan (Indian type w.c. pan) size
580 mm with 100 mm sand cast iron P. or S trap
10 litres high level P.V.C. flushing cister (of
approved make) with fittings, rack bolts 32 mm
diameter P.V.C telescopic flush pipe with fit tings
15601 and clamps 25mm P.V.C. over flow pipe with
specials & mosquito proof coupling of approved
municipal design and nylon pull complete cutting
and making good the walls and floors where
required.
a Long pan pattern W. C. Pan Each 7355.00
b Orissa pattern W.C. pan Each 6912.00
Proving and fixing white vitreous china water
closet squating (European type w.c. pan) with seat
and lid, C.P. brass hinges and rubber buffers 10
lts. High level P.V.C.. flushing cistern (of approved
make ) with fittings, rack bolts 32 mm diameter
P.V.C. telescopic flush pipe with fit tings and
15602 clamps 25mm P.V.C.. over flow pipe with specials
& mosquito proof coupling of approved municipal
design and nylon. chain and pull complete, cutting
and making good the walls ad floors where
required.
a W.C. pan with white plastic seat and lid. Each 7925.00
b W.C. pan with black plastic seat and lid. Each 7925.00
Providing and fixing white vitereous china
pedestal type (Europen type) water closet with
seat as lid, whth C.I. brass hinges and rubber
fitings 15 lts white vitreous china low level
flushing cistern with fittings as brackets 40 mm

white precelain 3enameled flush bad, 25 mm
15603 overflow pipe with specials and mosquito proof
coupling of approved municipal design complete,
including cutting and making good the walls and
floors where required.
a W.C. pan with white plastic seat and lid Each 8056.00
b W.C. pan with black plastic seat and lid. Each 8056.00
Providing and fixing white vitreous china flat back
or wall corner type lipped front urinal basin of
430 x 260 x 350 mm and 340 x 430 x 265 mm
sizes respectively with pvc automatic flushing
cistern with fittings, R.S. or C.I. brackets, standard
15604
size galvanised steel flush pipe and spreaders
with brass unions & G.I. clamps complete,
including painting of cister and fittings, cutting
and making good the walls and floors where
required.
One urinal basin with 5 litres p .v .c. automatic
a Each 15597.00
flushing cistern.
Range of two urinal basin with 10 litres pvc.
b Each 9818.00
Automatic flushing
Range of three urinal basins with 10 litres pvc.
c Each 14771.00
automatic flushing cistern .
Range of four urinal basins with 15 litres pvc.
d Each 23373.00
automatic flushing cistern .
Providing and fixing one piece construction white
vitreous china squatting plate urinal with an
integral longitudinal flushing pipe, 100mm dia
half round channel, pvc. Automatic flushing
cistern with fittings R.S. or C.I. brackets, standard
size G.I. flush pipe for back and front flush with
stadard spreader fittings, G.I. clamps, white

vitreous china tiling 1200 mm high to front and
side walls with white vitreous corners and angles
set in neat cement standard urinal C.I. trap 65 mm
diameter with vent arm & outlet grating &
15605 coupling in c.p. brass complete, including painting
the cistern & fittings cutting and making good the
walls and floors where required.
Single plate with 5 litres pvc. automatic flushing
a each 17811.00
cistern.
Range of two squating plates with 10 litres pvc
b each 12960.00
automatic flushing cistern.
Range of three squating plates with 10 litres pvc.
c each 20108.00
Range of four squating plates with 15 litres pvc.
d each 24832.00
Providing and fixing vitreous china wash basin
with RS or C.I. brackets painted white, 15 mm C.P.
brass pillar taps C.P. brass chain with rubber plug
32 mm C.P. brass waste of pattern, 32 mm
diameter M.I. or C.P. brass trap and union
complete, including cutting and making good the
walls where required.
Flat back wash basin size 630 x 450mm with a
a Each 7953.00
pair of 15 mm C.P. brass pillar taps.
15606 Flat back wash basin size 630x 450mm with a
b Each 7044.00
single 15 mm C.P. brass pillar taps.
c Each 6615.00
pair of single 15 mm C.P. brass pillar taps.
d Each 5706.00
Angle back was basin size 600 x 480 mm with a
e Each 5122.00
pair of 15 mm C.P. brass pillar taps.
Angle back was basin size 600 x 480 mm with
f Each 4213.00
Plugging the hole of wash basin if pillar tap is not
15607 Each 149.00
to be provided.
Providing and fixing white vitreous china pedestal
15608 for was basin complete recessed at the back for Each 2800.00
the reception of pipes and fittings.
Proving and fixing kitchen sink with R.S. or C.I.
brackets C.P. brass chain with rubber plug 40 mm
C.P. brass waste and 40mm M.I. or C.P. brass trap

necessary unions complete, including painting the
fittings, cutting and making good the walls where
15609 required.
White vitreous china sink size 600 x 450 x 200
a Each 6754.00
mm
b Each 5735.00
mm
Providing and fixing one piece construction bath
tub size 1700 mm x 740 mm x 440 mm of desired
shade including integral overflow & with
detachable feet, a pair of 20 MM C.P. brass pillar
taps, 40 mm c p. brass waste, 32 mm c.p. brass
15610 overlfow,, c.p. brass chain with rubber plug 40
mm m.i or c.p. brass trap with union complete.
a Fibre glass tub of desired shade Each 13611.00
b Acryluic 1520 x 710 x 440 mm Each 21590.00
c Acryluic 1680 x 750 x 440 mm Each 21590.00
Providing and fixing white virtreous china water

closet squating pan size 580 mm:
15611
a Long pan pattern (indian type) w.c. pan Each 4067.00
b Orissa pattern w.c. pan Each 3604.00
Providing & fixing white viresous china pedestal
15612 Each 2723.00
type (European type) water closet pan
Providing & fixing a pair of white viresous china
15613 250 x 130 x 30 mm foot rests of standard pattern Each 1025.00
for squatting pan water closet.
Providing and fixing 15 litres low level white
vitreous china flushing cistern of approved make
15614 Each 2659.00
with fittings such as lead, valveless syphon etc.
and C. P. brass handle complete.
Providing and fixing 12.5 lts. High level C.I.
flushing cistern of approved make with in tegral
15615 Each 1353.00
fittings such as ball valve, ball lever G. I. Chain and
pull complete.
Providing and fixing 5 litres pvc. Automatic
15616 Each 10686.00
flushing cistern with fittings.
Providing and fixing 10 litres pvc. Automatic
15617 Each 1267.00
flushing cistern with fittings.
Providing and fixing plastic seat with lid for
pedestal type WC pan with CP brass hinges rubber
15618 buffers etc. complete
a White plastic seat with lid. Each 2595.00
b Black plastic seat with lid. Each 2595.00
15619 Providing and fixing G.I. Chain with G.I. pull. Each 205.00
Providing and fixing G. I. Inlet connection for flush
15620 Each 99.00
pipes connecting with W. C. pan.
or wall corner type lipped front urinal basin of
15621 Each 2982.00
430 x 260 x 350 mm and 340 x 430 x 265 mm
respectively.
Providing and & fixing white vitreous china wash
basin including making all connection but
excluding the cost of fittings :
15622
a Flat back wash basin of size 630 x 450 mm Each 3915.00
b Flat back wash basin of size 550 x 400 mm Each 2577.00
c Angle back wash basin of size 600 x 480 mm Each 1084.00
Providing & fixing kitchen sink including making

all connections excluding cost of fittings.
15623
a Each 3173.00
mm
White vitresous china sink size 600 x 450 x 250
b Each 3346.00
mm
Providing and fixing C.P. brass chain and rubber
15624 Each 352.00
plug complete for sink of wash basin.
Providing and fixing rubber plug for sink or wash
15625 Each 260.00
basin
Providing and fixing C. P. brass waste for wash

basins and sink
15626
a 32 mm dia Each 345.00
b 40 mm dia. Each 1584.00
Providing & fixing M.I. fisher union for wash basin

and sinks :
15627
a 32 mm dia . Each 218.00
b 40 mm dia Each 255.00
Providing and fixing C.P. bras or M. I. Trap for

wash basin and sinks:
15628
Providing & fixing (4’) 100 mm sand cast iron
15629 Each 49.00
grating for gully floor or nahni trap.
Providing and fixing in position 32 mm diameter
glavanised steel telescopic flush pipe complete
15630 Each 785.00
including and cutting and making good the walls
and floors.
Providing & Fixing In Position 25 mm diameter
15631 mosquito proof coupling of approved municipal Each 637.00
design.
Providing and fixing 600 x 450 mm bevelled edge
mirror of superior glass (of approved quality)
15632 complete with 6 mm thick asbestos sheet ground Each 2130.00
fixed to wooden cleats with C. P. brass screws and
washers.
Providing & fixing 600 x 120 mm glass shelf with
15633 C. P. brass brackets and guard rail complete fixed Each 653.00
to wooden cleats with C. P. brass screws.
Providing & fixing c.p. brass towel rail complete
with C.P. brass brackets fixed to wooden cleats
15634 with C. P. brass screws
a 750 x 20 mm size Each 2368.00
b 600 x 20 mm size Each 2122.00
Providing and fixing toilet paper holder :
15635 a C.P. brass Each 1385.00
b Polished wooden Each 200.00
Providing & fixing liquid soap container with C. P.
brass lid and brackets fixed to wooden cleats with
15636 C. P. brass screws
a Glass container Each 2061.00
b Plastic container Each 1921.00
Providing & fixing soap dish chromium plated
15637 with brackets fixed to wooden cleats with CP Each 873.00
brass screw
Providing & fixing sand cast iorn spun soil, waste

and vent pipes.
15638 a 100 mm dia Metre 794.00
b 75 mm dia Metre 694.00
c 50 mm dia Metre 566.00
Providing & fixing M.S. holder bat clamps of
approved design to sand cast iron cast iron spun
pipe embedded in and including cement concrete
blocks 10 x 10 x 10 cm of 1: 2:4 mix (1 cement ;2
coarse sand :4 graded stone aggregate 20 mm
15639 nominal size) including cost of cutting holes and
making good the walls etc.
a For 100 mm dia pipe Each 126.00
b For 75 mm dia pipe Each 118.00
c For 50 mm dia pipe Each 115.00
Providing & fixing sand cast iron bend of required
degree with access door, insertion rubber washer
3mm thick blots & nuts complete.
15640
a 100mm Each 598.00
b 75mm Each 511.00
c 50 mm Each 375.00
Providing and fixing sand cast iron plain bend of

required degree:
15641 a 100mm Each 554.00
b 75mm Each 530.00
c 50 mm Each 441.00
Providing and fixing sand cast iron heel rest

sanitary bend :
15642 a 100mm Each 548.00
b 75mm Each 487.00
c 50 mm Each 394.00
Providing and fixing sand cast iron double equal
junction of required degree with access door,

15643 insertion rubber washer 3 mm thick bolts and
nuts complete:
a 100 x 100 x 100 x 100mm Each 1131.00
b 75 x 75 x 75 x 75mm Each 852.00
c 50 x 50 x 50 x 50 mm Each 719.00

plain junction of required degree :
15644 a 100 x 100 x 100 x 100mm Each 1009.00
b 75 x 75 x 75 x 75msssm Each 798.00
c 50 x 50 x 50 x 50 mm Each 589.00
Providing and fixing sand cast iron single equal

junction of required degree:
15645 a 100 x 100 x 100 mm Each 705.00
b 75 x 75 x 75 mm Each 524.00
c 50 x 50 x 50 mm Each 521.00
junction of required degree with access door,

insertion rubber washer 3 mm thick bolts and
15646 nuts complete:
a 100 x 100 x 100 mm Each 831.00
b 75 x 75 x 75 mm Each 798.00
c 50 x 50 x 50 mm Each 575.00
Providing and fixing sand cast iron double
unequal junction of required degree with access

door, insertion rubber washer 3 mm thick bolts
15647 and nuts complete:
a 100 x 100x 75 x 75 mm Each 646.00
b 100 x 100 x 50 x 50mm Each 543.00
c 75 x 75 x 50 x 50 mm Each 426.00

unequal junction of required degree :
15648 a 100 x 100 x 75 x 75mm Each 635.00
b 100 x 100 x 50 x 50mm Each 531.00
c 75 x 75 x 50 x 50 mm Each 446.00
Providing and fixing sand cast iron single unequal
junction of required degree with access door

insertion rubber washer 3 mm thick bolts and
15649 nuts complete:
a 150 x 150 x 100 mm Each 909.00
b 100 x 100 x 75mm Each 770.00
c 100 x 100 x 50 mm Each 628.00

junction of required degree :
15650 a 150 x 150 x 100 mm Each 840.00
b 100 x 100 x 50mm Each 737.00
c 75 x 75 x 50 mm Each 530.00

plain invert branch of required degree :
15651 a 100 x 100 x 100 x 100 mm Each 1009.00
b 75 x 75 x 75 x 75 mm Each 798.00
c 50x 50 x 50x 50 mm Each 589.00

invert of required degree :
15652 a 100 x 100 x 100 mm Each 668.00
b 75 x 75 x 75 mm Each 481.00
c 50x 50 x 50 mm Each 360.00

unequal plain invert of required degree :
15653 a 100 x 100 x 75 x 75 mm Each 842.00
b 100 x 100 x 50 x 50 mm Each 803.00
c 75x 75 x 50x 50 mm Each 694.00

invert branch of required degree :
15654 a 100 x 100 x 75 mm Each 1009.00
b 100x 100 x 50 mm Each 687.00
c 75x 75 x 50 mm Each 603.00
Providing and fixing sand cast iron off-set:
A
100 mm off-set: 1) with 75 mm projection Each 449.00
1)
2) With 100 mm projection. Each 535.00
B
1)
15655
C
1)
Providing and fixing sand cast iron door piece,
insertion rubber washer 3mm thick bolts and nuts
complete :
15656
a 100 mm Each 143.00
b 75 mm Each 113.00
c 50 mm Each 89.00
Providing and fixing sand cast iron terminal
15657
guard:
a 100 mm Each 438.00
b 75 mm Each 351.00
c 50 mm Each 328.00
Providing and fixing sand cast iron collar:
a 100 mm Each 419.00
15658
b 75 mm Each 309.00
c 50 mm Each 282.00
Providing and fixing sand cast iron pass over

pipe:
15659 a 100 mm Each 994.00
b 75 mm Each 858.00
c 50 mm Each 825.00
Providing lead caulked joint to sand cast iron ,

cast iron spun pies and fittings of dia :
15660 a 100 mm Each 209.00
b 75 mm Each 180.00
c 50 mm Each 150.00
Providing and fixing m.s. stays and clamps for

sand cast iron spun pipes of dia:
15661 a 100 mm Each 112.00
b 75 mm Each 117.00
c 50 mm Each 84.00
Providing and fixing sand cast iron trap of self
cleaning design with sand cast iron screwed down
or hinged grating with or without vent arm
complete, including cost of cutting and making
15662 good the walls and floors :
a 100 mm inlet and 100 mm outlet. Each 1387.00
b 100 mm inlet and 75 mm outlet. Each 1367.00
c 100 mm inlet and 50 mm outlet. Each 1028.00
Cutting chase in brick masonry walls for fixing
100 mm diameter sand cast iron pipes & making
15663 Metre 548.00
good the same with brick work in cement 1:3 (1
cement :3 fine sand)
Cutting chase in brick masonry walls for fixing 50
mm diameter sand cast iron pipes & making good
15664 Metre 387.00
the same with brick work in cement 1:3 (1
cement :3 fine sand).
Painting C.I. cistern with bit mastic or any other

anti corrosive paint inside & white paint over a
15665 coat of ready mixed primer (of approved quality) Each 587.00
on the outside surface of the cistern flush pipe,
other fitting, etc complete for new work .
Painting sand cast iron, cast iron spun soil waste,
vent pipe sand fitting with paint of any colour

such as chocolate, grey of buff etc. over a coat of
15666 primer (of approved quality ) for new work .
a 50 mm diameter pipe Metre 36.00
b 100 mm diameter pipe. Metre 65.00
Repainting sand cast iron cast iron spun soil
waste, vent pipes and fittings with paint of any
15667 colour such chocolate, grey or buff etc.
a 50 mm diameter pipe Metre 20.00
b 100 mm diameter pipe. Metre 34.00
Re-painting bath tubs 170 cm. Long with enamel
15668 Metre 575.00
paint.
Providing and fixing white vitreous china type
water closet squatting pan (european type w.c.
pan) with flush valve Nelson/ similar) fully
15669 chromium plated with stop cock wall flanges flush Each 4468.00
pipe or elbow and vaccu.m breaker coupling etc.
including cutting making good the walls and floors
where required.
Providing and fixing white vitreous china water
closet squatting pan (Indian type w.c. pan) with
flush valve Nelson/ similar) fully chromium
15670 plated with stop cock wall flanges flush pipe or
elbow and vaccu.m breaker coupling etc. including
cutting making good the walls and floors where
required.
Long pan squatting w.c. pan. Each 6134.00
Providing and fixing flush valve (nelson or
mimilar) fully chrominium plated with stop cock
15671
wall flange flush pipe or elbow and vaccu.m
breaker coupling etc. complete :
For Indian or european W.C. Each 2303.00
Providing & fixing G.I. pipes complete with G.I.
fittings & clamps, including cutting and making
good the walls etc. (Internal Work)
a 15 mm nominal bore Metre 251.00
15672 b 20 mm nominal bore Metre 280.00
c 25 mm nominal bore Metre 310.00
d 32 mm nominal bore Metre 382.00
e 40 mm nominal bore Metre 452.00
f 50 mm nominal bore Metre 559.00
Providing & fixing G.I. pipes complete with G.I.
15673 fittings including trenching & re-filling etc.
(external work).
a 15 mm nominal bore Metre 210.00
b 20 mm nominal bore Metre 228.00
e 40 mm nominal bore Metre 342.00
f 50 mm nominal bore Metre 393.00
g 80 mm nominal bore Metre 623.00
Making connection of G. I. Distribution branch
with G. I. Main 25 mm to 40 mm nominal bore by
15674 Each 712.00
providing and fixing tee, including cutting and
treading the pipe etc. complete
Making connection of G. I. Distribution branch
with G. I. Main 50 mm to 80 mm nominal bore by
15675 Each 840.00
providing and fixing tee including treading the
pipe etc. complete
Fixing water meter & stop cock in G. I. Pipe line
including cutting & treading the pipe and making
15676 Each 465.00
long screw etc. complete (cost of water meter and
stop cock to be paid separately)
Providing and fixing brass bib cock (heavy) of

approved quality :
15677 a 15 mm nominal bore Each 516.00
b 20 mm nominal bore Each 763.00
c 25 mm nominal bore . Each 323.00
Providing and fixing brass stop cock (heavy) of

approved quality :
a 15 mm nominal bore Each 516.00
15678
d 32 mm nominal bore Each 764.00
e 40 mm nominal bore Each 1211.00
f 50 mm nominal bore . Each 1390.00
Providing and fixing brass full way valve (heavy)

duty with wheel of approved quality :
15679
e 40 mm nominal bore Each 1408.00
f 50 mm nominal bore . Each 1701.00
g 65 mm nominal bore . Each 7449.00
h 80 mm nominal bore . Each 12670.00
Providing and fixing ball valve (brass) of
15680
approved quality :
a High pressure with P.V.C. floats:
1 15 mm nominal bore Each 264.00
3 25mm nominal bore Each 364.00
b Low pressure with copper. floats :
c High or low pressure with plastic floats:
Providing and fixing non-return valve of approved

quality :
15681
c 40 mm nominal bore Each 2100.00
e 65mm nominal bore Each 6241.00
f 80 mm nominal bore Each 10247.00
Providing and fixing brass ferrule heavy C.I.

mouth cover including boring tapping the main:
15682 a 15 mm nominal bore Each 1241.00
Providing and fixing P.V.C. connection pipe with

brass unions 15 mm nominal bore:
15683 a 30 cm (12”) length . Each 211.00
b 37.5 cm (15”) length . Each 223.00
c 45 cm (18”) length . Each 235.00
Providing and fixing C.P. brass shower rose with

15 or 20 mm. Inlet:
15684
a 100 mm diameter. Each 361.00
b 150 mm diameter. Each 391.00
Providing and fixing normal gauge polythene
pipes of approved quality complete with special
flange compression type fitting (of approved
make) including trenching ad refilling etc
15685 (external work) (high density):
a 25 mm nominal bore. Metre 127.00
b 32 mm nominal bore Metre 158.00
Providing and fixing normal gauge ploythene
pipes of approved quality complete with special
flange compression type fitting of approved
quality complete with special flange
compression type fitting (of approved make
15686 including trenching and refilling etc. (external
work), low density:
a 63 mm dia O.D. Metre 293.00
b 75 mm dia O.D. Metre 392.00
c 90 mm dia O.D. Metre 431.00
Providing and placing on terrace roof of floor two
(1st flor roof single piece rotational moulded

polythene water storage tank having I S I mark
15687 and conforming to I S 12701; 1996.
a 200 lit .capacity Each 2452.00
b 500 lit. capacity Each 5044.00
c 1000 lit. capacity Each 9420.00
Extra for placing polythene tank on roof of floor

three (2nd floor roof)
15688 a 200 lit .capacity Each 281.00
b 500 lit. capacity Each 468.00
c 1000 lit. capacity Each 655.00
Providing, laying and jointing glazed stone wear
pipes grade “a” with stiff mixture of cement

mortar in the proportion of 1:1 (1 cement :1 fine
15689 sand) including testing of joints etc. complete :
a 100 mm diameter. Metre 259.00
b 150 mm diameter. Metre 429.00
c 230 mm diameter. Metre 649.00

cement :5 coarse sand :10 graded stone, aggregate

40 mm nominal size) alround S.W. pipes including
15690 bed concrete 15 cm thick as per standard design :
a 100 mm diameter. Metre 1011.00

b 150 mm diameter. Metre 1084.00
c 230 mm diameter. Metre 1344.00
cement :5 fine sand :10 graded stone aggregate 40
mm nominal size upto haunches of s.w. pipes
15691
including bed concrete 15cm thick as per
standard design :
a 100 mm diameter S.W. pipe. Metre 678.00
b 150 mm diameter S.W. pipe Metre 745.00
c 230 mm diameter. S.W. Pipe Metre 945.00
Providing and fixing square-mouth S.W. gully trap
grade ‘A’ complete with c.i. grating brick masonry
chamber and water tight C.I. cover with frame of

300 x 300 mm size (inside the weight of cover to
15692 be not less than 4.53 kg). And frame to be not less
than 2.72 kg as per standard design :
a 100 x 100 mm size P type Each 3037.00
b 150 x 100 mm size –P or S type Each 2977.00
Dismateling of old S.W. pipes including breaking
of joints and bed concrete stacking of useful
materials near the site within 50 m lead and
disposal of unserviceable materials into municipal
15693 dumps:
a 100 mm diameter . Metre 40.00
b 150 mm diameter Metre 42.00
c 230 mm diameter Metre 48.00
d 300 mm diameter Metre 52.00
Constructing brick masonry manhole or
inspection chamber with second class bricks in
cement mortar 1:5 (1 cement :5 fine sand) R.C.C.
top slab with 1:2:4 mix (1 cement: 2 coarse
sand ;4 graded stone aggregate 20mm nominal
size foundation concrete 1:2:4 mix (1 cement ;2
coarse sand :4 graded stone agrregate 40mm

nominal size) inside plastering 12 mm thick with
cement mortar 1:3 (1 cement :3 coarse sand)
finished with a floating coat of neat cemetn and
making channels in cement concrete 1:2:4 mix (1
cement :2 coarse sand :4 graded stone aggregate
15694 20 mm nominal size) neatly finished complete as
per standard design.
Inside size 90 x80 cm and 45 cm deep including
C.I. cover with frame (light duty) 455 x610mm
a internal dimensions total weight of cover ad Each 12768.00
frame to be not less than 38 kg. (weight of cover
23 kg. )
C.I. cover with frame (light duty) 455 x 610 mm
b internal dimensions total weight of cover and Each 15485.00
23 kg.)
Inside size 1.2m x 90 cm and 90cm deep including
C.I. cover with frame (medium duty) 500 mm
c Each 28576.00
internal diameter total weight of cover and frame
to be not less than 116 kg. (weight of cover 58 kg).
Inside size 60 x 60cm and 60cm deep including

C.I. cover with frame (light duty) 455x610mm
d Each 10768.00

top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2
coarse sand ;3 graded stone aggregate 20mm
nominal size foundation concrete 1:1 1/2:3 mix (1
cemet ;1 1/2 coarse sand :8 graded stone

agrregate 20mm nominal size) inside plastering
12 mm thick with cement mortar 1:3 (1 cement :3
coarse sand) finished with a floating coat of neat
cement and making channels in cement concrete
1:2:4 mix (1 cement :2 coarse sand :4 graded
stone aggregate 20 mm nominal size) neatly
finished complete as per standard design.
15695 frame to be not less than 38 kg. (weight of cover
23 kg. )
23 kg.)

c Each 25243.00

d Each 9297.00
top slab with grade M 25 mix design with coarse
sand and graded granitic or basaltic stone
aggregate as per mix design requirements
foundation concrete M 25 mix design with coarse
sand graded granitic or basaltic stone aggregate
as per mix design requirements inside plastering
12 mm thick with cement mortar 1:3 (1 cement :3
coarse sand) finished with a floating coat of neat
cement and making channels in cement concrete
1:2:4 mix (1 cement :2 coarse sand :4 graded
stone aggregate 20 mm nominal size) neatly
finished complete as per standard design.
15696 frame to be not less than 38 kg. (weight of cover
23 kg. )
23 kg.)

c Each 25377.00

d Each 9356.00
15697 Extra for depth for manholes : a) size 90 x 80 cm Metre 6983.00

15698 Extra for depth for manholes : a) size 1.2 x 90 cm Metre 8357.00
Providing M.S. footrests including fixing in

manholes with 20 x 20 x 10 cm cement concrete
block 1:3:6 (1 cement :3 coarse sand :6 graded
15699
stone aggregate 20 mm nominal size) as per
standard design :
a With 20 x 20 mm square or round bar Each 424.00
Replacement of M.S. foot rests in manholes
including dismantling concrete blocks and fixing
with 20 cm x 20 cm x 10 cm cement concretes
15700
including 1:3:6 (cement : 3 coarse sand : 6 graded
stone aggregate 20mm nominal size):
a With 20mm x 20 mm square of round bar Each 407.00
Supplying and fixing C.I. cover without frame for

manholes:
445x610 mm rectangular C.I. cover (light duty)
15701 a Each 4503.00
weight of cover to be not less than 23 kg.
500 mm dia C. I. Cover (medium duty) the weight
b Each 13289.00
of the cover to be not less than 58 kg.
Making connection of drain or sewer line with
existing manholes including braking into and
making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand: 4
graded stone aggregate 20 mm nominal size)
15702 cement plastered on both sides with cement
mortar 1:3 (1 cement : 3 coarse sand) finished
with a floating coat of neat cement and making
necessary channels for the drain etc. complete:
a For pipe 100 to 150 mm dia Each 222.00
b For pipe 250 to 300 mm dia Each 863.00
Making chases upto 7.5x7.5 cm in walls including
15703 Metre 103.00
making good after housing G.I. pipe etc.
Making soak pit. 2.5 m dia 3 m deep with 45x45
cm dry brick honey comb shaft and S.W. drain
pipe 100 mm diameter, 1.8 m long complete filled
15704 Each 36210.00
with laterite stone aggregate 125 to 180 mm
surrounded by laterite stone aggregate of 40 mm
and down gauge as per standard design.
Constructing soak pit 1.20m x 1.20m x1.20m filled

with laterite stone aggregate 125 to 180 mm
15705 Each 4725.00
including S.W. drain pipe 100 mm diameter and
1.2m. long complete as per standard design. :
Providing and fixing standard sand cast iron

intercepting tap inside interception chamber (to
be paid separately) including jointing with stiff
15706 mixture of cement mortar 1:1 (1 cement 1 fine
sand) as directed by engineer-in-charge:
a For 100 mm dia pipe. Each 829.00
b For 150 mm dia pipe Each 914.00
Providing and fixing rigid PVC S.W.R. (soil, waste
& rain water drainage pipes of approved

including lubricant etc. complete (single/double)
15707 socketed:
b 75 mm dia Metre 157.00
Providing and fixing rigid PVC bend of required
degree (of approved make) for S.W.R. drainage
15708 pipes of approved including lubricating.
Providing and fixing rigid PVC bend (approved
make ) for S.W.R. pipes including lubricating etc
15709 complete bend with door :
Providing and fixing single tee of rigid PVC
(approved make) for S.W.R. pipes including
15710 lubricating etc. complete, without door:
a 110 mm dia. Each 531.00
Providing and fixing single Tee of rigid PVC
(approved make ) for S.W.R. pipes including
15711 lubricating etc complete, with door :
Providing and fixing single “Y” of rigid PVC
15712 lubricating etc complete, without door :
15713 lubricating etc complete, with door :
Providing and fixing double “Y” of rigid PVC
15715 (approved make ) for S.W.R. pipes including
lubricating etc complete, with door :
Providing and fixing nahani trap of rigid PVC
Providing and fixing U.P.V.C. pipe clips (approved

make ) for S.W.R. pipes :
15717
Providing and fixing R.P.V.C. vent cowl:
15718 a 110 mm dia Each 72.00
Providing and fixing centrifugally cast iron
confirming to IS 3989 / 84 soil waste and vent
pipes NECO brand or equivalent.
15719
a 75 mm dia. Metre 755.00
Providing and fixing centrifugally cast iron bend
confirming to IS 3989 / 84 plain of require
degree.
15720
c 150 mm dia. Each 942.00
confirming to IS 3989 / 84 bend of require degree

with access door insertion rubber 3 mm thick
15721 bolts and nuts etc..
confirming to IS 3989 / 84 heel rest sanitary
bend.
15722
confirming to IS 3989 / 84 single equal plain
15723 junction of required degree.
a 75 x 75 x 75 mm Each 460.00
b 100 x 100 x 100 mm Each 560.00
c 150 x 150 x 150 mm. Each 757.00

junction of required degree with access door
15724 insertion rubber 3 mm. thick with bolts.
a 75 x 75 x 75 mm Each 616.00
b 100 x 100 x 100 mm Each 858.00
c 150 x 150 x 150 mm. Each 1830.00
invert (Y) branch of required degree.
15725
a 75 x 75 x 75 mm Each 484.00
b 100 x 100 x 100 mm Each 646.00
c 150 x 150 x 150 mm. Each 2575.00
confirming to IS 3989 / 84 double equal plain
junction of required degree.
15726
a 75 x 75 x 75 x 75mm Each 713.00
b 100 x 100 x 100 x 100 mm Each 858.00
c 150 x 150 x 150 x 150 mm. Each 1195.00
confirming to IS 3989 / 84 double equal junction
of required degree with access door insertion
rubber washer 3 mm. thick, bolts and nuts
15727 complete.
a 75 x 75 x 75 x 75mm Each 752.00
b 100 x 100 x 100 x 100 mm Each 917.00
c 150 x 150 x 150 x 150 mm. Each 1219.00
confirming to IS 3989 / 84 double equal plain
invert (Y) branch of required degree.
15728
a 75 x 75 x 75 x 75 mm Each 364.00
b 100 x 100 x 100 x 100mm Each 645.00
c 150 x 150 x 150 x 150 mm. Each 587.00

conforming to IS 3989/84 collar.
15729 a 75 mm dia. Each 188.00

terminal guard conforming to IS 3989 / 84
15730 a 75 mm dia. Each 211.00

conforming to IS 3989/84 offset.
a)
75 mm with 75 mm projection Each 237.00
i
ii 75 mm with 115 mm. projection Each 258.00
iii 75 mm with 150 mm projection Each 281.00
15731 b)
100 mm with 75 mm projection Each 281.00
i
ii 100 mm with 115 mm projection Each 289.00
c) i 150 mm with 75 mm projection Each 464.00
ii 150 mm with 115 mm projection Each 502.00
conforming to IS 3989/84 single unequal plain
juction of required degree.
15732
a 100 x 100 x 50 mm Each 954.00
b 100 x 100 x 75 mm. Each 883.00
c 150 x 150 m 100 mm Each 2024.00
Providing and fixing centrifugally cast iorn
conforming to IS 3989 / 84 single unequal plain
invert branch of required degree.
15733
a 100 x 100 x 50 mm Each 429.00
b 100 x 100 x 75 mm. Each 497.00
c 150 x 150 m 100 mm Each 779.00
conforming to IS 3989 / 84 single unequal invert

branch with access door insertion rubber washer
15734 3 mm thick with nuts bolts complete.
a 100 x 100 x 50 mm Each 975.00
b 100 x 100 x 75 mm. Each 1233.00
c 150 x 150 m 100 mm Each 2189.00
conforming to IS 3989 / 84 double unequal plan
junction . bolts complete.
15735 a 75 X 75 X 50 x 50 mm Each 318.00
b 100 x 100 x 50 x 50 mm Each 375.00
c 100 x 100 x 75 x 75 mm Each 483.00
d 150 x 150 x 100 x 100 mm Each 799.00
conforming to IS 3989 / 84 double unequal
15736 junction of required degree with access door
insertion rubber washer 3 mm thick with nuts
bolts complete.
b 100 x 100 x 50 x 50 mm Each 1021.00
c 100 x 100 x 75 x 75 mm Each 1395.00
d 150 x 150 x 100 x 100 mm Each 2178.00
Providing and fixing NICKEL chrome plated

copper alloy Fancy Pillar Cock rocket type Jaquar
15738
make or equivalent. Confirming to IS 8931;1993
a 15mm nominal bore Each 1525.00

copper alloy Fancy BIB Cock Short Body Jaquar
15739
copper alloy Fancy long body bib cock with wall

15740 flance Jaquar make or equivalent. Confirming to IS
8931;1993
copper alloy Fancy two way long body bib cock

15741 with wall flance Jaquar make or equivalent.
Confirming to IS 8931;1993
copper alloy Fancy concealed stop cock with sheet

15742 flance 20mm Jaquar make or equivalent.
copper alloy Fancy concealed stop cock with

15743 slinding flance 15 mm Jaquar make or equivalent.
copper alloy Fancy wall mixer with 115mm long
bend pipe for connection to over head shower
15744 Jaquar make or equivalent. Confirming to IS
8931;1993
Wall mixer with 115 mm long bend pipe for
a Each 5631.00
connection to over head shower.
copper alloy Fancy wall mixer with 3 IN 1 SYSTEM
15745 WITH 115MM long bend pipe for connection to Each 6701.00
over head shower Jaquar make or equivalent.
copper alloy Fancy wall mixer non telephonic
15746 Each 4575.00
shower system Jaquar make or equivalent.
copper alloy Fancy sink mixer with U shape
15747 Each 3782.00
swinging casted spout Jaquar make or equivalent.
copper alloy Fancy TELEPHONIC SHOWER 1.5M
15748 FLEXIBLE TUBE WITH SWINGING WALL HOOK Each 2698.00
Jaquar make or equivalent. Confirming to IS
8931;1993
copper alloy Fancy BOTTLE TRAP ECONOMY
15749 Each 1444.00
TYPE 32MM Jaquar make or equivalent.
copper alloy Fancy waste coupling 32 mm with
15750 Each 541.00
190 mm long connection pipe wall flance Jaquar
Providing and fixing chlorinated ployvinyl

chloride (CPVC) pipes confirming to IS:15778,
having thermal stability for hot and cold water
supply including all CPVC plain and brass
threaded fittings including fixing the pipes with

clamps at 1 mt. spacing. This includes jointing of
pipes and fittings with one step CPVC solvent
cement and testing of joints complete as per
15751 direction of the Engineer-in-charge. Internal work
exposed on wall (Medium duty SDR 13.5 pipe).
a 15 mm outer dia CPVC pipe Metre 182.00
b 20 mm outer dia CPVC pipe Metre 231.00
c 25 mm outer dia CPVC pipe Metre 286.00
d 32 mm outer dia CPVC pipe Metre 407.00
e 40 mm outer dia CPVC pipe Metre 547.00
f 50 mm outer dia CPVC pipe Metre 797.00
Providing and fixing chlorinated ployvinyl
chloride (CPVC) pipes confirming to IS:15778,
supply including all CPVC plain and brass
threaded fittings including fixing the pipes with
clamps at 1 mt. spacing. This includes jointing of
pipes and fittings with one step CPVC solvent
15752 cement and testing of joints complete as per
direction of the Engineer-in-charge. Concealed
work (medium duty SDR 13.5 pipe) including
cutting chases and making good the walls etc.
a 15 mm dia nominal outer dia pipes. Metre 201.00

b 20 mm dia nominal outer dia pipes. Metre 255.00
c 25 mm dia nominal outer dia pipes. Metre 329.00
d 32 mm dia nominal outer dia pipes. Metre 472.00
Providing and fixing chlorinated polyvinyl
chloride (CPVC) pipes confirming to IS: 15778
supply includng all CPVC plain and brass threaded

fittings CPVC solvent cement, trenching, refilling
and testing of joints complete as per firectionof
the Engineer in charge.(External work (heavy
15753 duty SDR 11 pipe)
a 15 mm nominal outer dia pipes Metre 172.00
b 20 mm nominal outer dia pipes. Metre 210.00
c 25 mm nominal outer dia pipes. Metre 286.00
d 32 mm nominal outer dia pipes. Metre 417.00
e 40 mm nominal outer dia pipes. Metre 545.00
f 50 mm nominal outer dia pipes. Metre 851.00
Providing and fixing 3 layer PP-R (Polypropylene
Random copolymer) pipes SDR 7.4 UV stabilized
& anti-microbialfusion welded, having thermal
stabilityfor hot & cold water supply including all
PP-R plain & brass threaded polypropylene
random fittings i/c fixing the pipe with clamps at
1.00 m spacing. This includes testing of joints
15754 complete as per direction of Engineer in charge.
(Internal work - exposed on wall)
a PN-16 Pipe, 16 mm OD Metre 94.00
b PN-16 Pipe, 20 mm OD Metre 107.00
c PN-16 Pipe, 25 mm OD Metre 150.00
d PN-16 Pipe, 32 mm OD Metre 223.00
e PN-16 Pipe, 40 mm OD Metre 344.00
f PN-16 Pipe, 50 mm OD Metre 510.00
stability for hot & cold water supply including all
random fittings i/c fixing the pipe with clamps at
1.00 m spacing. This includes the cost of cutting
15755 chases and making good the same including
testing of joints complete as per direction of
Engineer in charge. (Concealed work including
cutting chases and making good the walls etc.)
a PN-16 Pipe, 16 mm OD Metre 140.00

random fittings i/c trenching, refilling & testing of
joints complete as per direction of Engineer in
charge. (External work)
15756 a PN-16 Pipe, 16 mm OD Metre 89.00
e PN-16 Pipe, 40 mm OD Metre 319.00
f PN-16 Pipe, 50 mm OD Metre 485.00
g PN-16 Pipe, 63 mm OD Metre 768.00
h PN-16 Pipe, 75 mm OD Metre 1056.00
i PN-16 Pipe, 90 mm OD Metre 1596.00
Random copolymer) pipes SDR 11 UV stabilized &
anti-microbialfusion welded, having thermal

15757 PP-R plain & brass threaded polypropylene
PN-10 Pipe, 110 mm OD (SDR-11) Metre 1587.00
Random copolymer) pipes SDR 11 UV stabilized &
anti-microbialfusion welded, having thermal

15758 PP-R plain & brass threaded polypropylene
PN-16 Pipe, 160mm OD (SDR-11) Metre 3396.00
Proving and fixing white vitreous china Wall Hung
type (European Type) water closet with seat and
lid with C.I. brass hinges and rubber fittings with
flush valve nelson/ similar fully chromium plated
with stop cock, wall flanges, flush pipe or elbow
15759 Each 10687.00
and vaccum breaker coupling etc. including chair
bracket/rag bolts, cutting & making good the
walls and floors where required and concealed
seat support - W.C. Pan with white plastic seat and
lid

Large lipped front urinal basin of
590x375x390mm size with Urinal Valve Auto
closing system with built in control cock & wall
flange with fittings, spreader, R.S. or C.I. brackets,
standard size C.P. Brassl flush pipe and spreaders
15760 Each 10159.00
with C. P. brass unions & C. P. Brass clamps with
waste fitting as per IS 2556, PVC trap with outlet
grating and other couplings in CP Brass complete,
including painting, fittings, cutting and making
good the walls and floors where required. - Range
of one urinal basin
Providing & fixing bevelled edge mirror of

superior glass (5mm thk) of approved Quality,
15761 sq.m. 3676.00
shape & size complete with CP brass screws and
washers, Cleats, CP studs etc Complete.
Providing and fixing Stainless Steel A ISI 304

(18/8) kitchen sink as per IS 13983 including
cutting of stone and making good the walls
wherever required. Kitchen sink without drain
15762
board. with coupling & all accessories complete
with choke stop strainer, Plain type having flat
borders for correct sandwithing between the
plaform top and bottom slabs complete.
Overall size 610mmx510mm (24"x20") bowl size
a 545mmx445mmx200mm (211/2"x 17 1/2"x 8") Each 7274.00
depth 200 mm. Glossy. 1.0mm thk,
b 560mmx410mmx215mm (22"x16"x81/2") Each 7154.00
Glossy. 1.0mm thk,
c 460mmx380mmx200mm (18"x 15"x 8") depth Each 6159.00
200 mm. Glossy. 1.0mm thk.
Providing and fixing Hand Shower (Health Faucet)
with 8mm dia, ABS/brass body with double lock
15763 1.00m long Flexible tube (Brass plated stainles Each 1648.00
steel flexible hose) and wall hook of approved
quality confirming to IS standards.
copper alloy Fancy Two Way Bib Cock with single
15764 Each 1747.00
knob and wall flange conforming to IS 8931:1993
15mm nominal bore.
Providing and fixing ASTM UPVC pipe, conforming

to ASTM 2467 with ISO 14001, including all UPVC
plain & brass threaded fittings, including fixing
the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step
UPVC solvent cement and testing of joints
complete as per direction of Engineer. Internal
work - Exposed on wall.
I SCH-40(blue)/(white)
15765
a 20mm outer dia. Metre 278.00
b 25mm outer dia. Metre 359.00
c 32mm outer dia. Metre 463.00
d 40mm outer dia. Metre 561.00
e 50mm outer dia. Metre 702.00
f 63mm outer dia. Metre 995.00
g 75mm outer dia. Metre 1282.00
h 90mm outer dia. Metre 1524.00
i 110mm outer dia. Metre 1765.00
plain & brass threaded fittings, including fixing
the pipe with clamps at 1.00 m spacing. This
15766
includes jointing of pipes & fittings with one step
UPVC solvent cement and testing of joints
complete as per direction of Engineer. Internal
work - Exposed on wall.
a 20mm outer dia. Metre 325.00
plain & brass threaded fittings, including jointing
of pipes & fittings with one step UPVC solvent
cement, trenching, refilling & testing of joints
complete as per direction of Engineer. External
work.
15767 a 20mm outer dia. Metre 248.00
plain & brass threaded fittings, including jointing
of pipes & fittings with one step UPVC solvent
cement, trenching ,refilling & testing of joints
complete as per direction of Engineer. External
work.
15768 a 20mm outer dia. Metre 295.00
Extra for providing opening of required size &
shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in
15769 marble/Granite/Cuddapah stone work, including Each 484.00
necessary holes for pillar taps etc. including
moulding, rubbing and polishing of cut edges etc.
complete.
Providing and fixing Stainless Steel A ISI 304

(18/8) kitchen sink as per IS: 13983 including
cutting of stone and making good the walls
wherever required : Kitchen sink with drain

board with coupling & all accessories complete
15770 with choke stop strainer, Plain type having flat
borders for correct sandwithing between the
plaform top and bottom slabs complete
Overall size 1040mmx510mm (41"x20") bowl
a) size 460mmx410mmx200mm (18"x 16"x 8") Each 10261.00
depth 200 mm. Glossy. 1.0mm thk,
copper alloy Fancy Bib Cock with extended lever
15771 Each 1257.00
handle and wall flange Confirming to IS 8931;
1993 15mm nominal bore
copper alloy Fancy Pillar Cock with extended
15772 Each 1665.00
lever handle and wall flange Confirming to IS
8931; 1993 15mm nominal bore
CHAPTER XVIII
MISCELLANEOUS WORK
SR.
NO.
Constructing brick masonry chullah 0.75 x 0.45 x
0.23 mts. with two holes in cement mortar 1: 6 (1
18001 cement : 6 coarse sand) fixing iron grating 15cms. Each 4047.00
diameter and finishing with mud and gobri plaster
complete
Providing and fixing 10cms dia flue of asbestos
18002 cement pipe with necessary specials including Metre 148.00
fixing in position with iron clamps complete.
Providing & fixing 25 x 25 x 1.7mm (1” x 1” x
18003 1/16”) angle iron or 24 x 34mm (1” x 1/8”) tread Metre 228.00
plate to RCC steps.
Hollow glass block 20 x 20 x 10cms in wall laid in
cement mortar 1:4 (1 cement: 4 fine sand) and
18004 sq.m 3396.00
pointed with cement mortar 1: 4 (1 cement: 4 find
sand) with colour pigment as required
Providing aluminum strips edging of size 38 x 12 x
18005 Metre 208.00
3 mm to stairs.
Providing and fixing 25mm dia G.I. pipes outlet in
18006 cement mortar 1:3 (1 cement : 3 fine sand) Metre 687.00
including cutting and making good the wall.
Providing and fixing 40mm dia G.I. pipes outlet in
18007 cement mortar 1: 3 (1 cement : 3 fine sand) Metre 922.00
including cutting and making good the wall.
Providing and fixing peg rack 75 x 10 x 2 cm thick
18008 of first class indian teak wood with three brass Each 890.00
peg chromium plated of approved design.
Providing and fixing chases 75mm width 50mm

deep average size in walls for conduit pipe and
filling the same with cement concrete 1:3:6 (1
18009 Metre 97.00
cement : 3 coarse sand : 6 graded stone aggregate
20mm and down gauge) after the conduit pipe is
full excluding the cost for 30 meters
Supplying jamba wooden bally piles 150 mm

mean diameter cut to length required (not

exceeding 9 meters) and planted in position ready
18010 for driving:
a Upto 2.5 meters long pile Metre 192.00
b Above 2.50 meters upto 3.50 meters long pile Metre 202.00
c Above 3.50meters upto 5.00 meters long pile Metre 212.00
d Above 5.00 meters long pile Metre 223.00
Supplying jamba wooden bally piles 200 mm
mean diameter cut to a length required (not

exceeding 9 meters) and planted in position ready
for driving:
18011
c Above 3.50 meters upto 5.00 meters long pile Metre 315.00
Heading and pointing whole bally piles 150mm
diameter including only rings, providing and
18012 fixing pile shoes, cutting of heads after driving and Each 276.00
taking out rings removing cut off portions to
departmental store as specified.
Heading and pointing whole bally piles 200mm
diameter including only rings, providing and
18013 fixing pile shoes, cutting of heads after driving and Each 355.00
taking out rings removing cut off portions to
departmental store as specified.
Driving down wooden piles of 150mm diameter
either in vertical or battered work to approved
lines and level through various strata including

arranging all the appliances necessary for pile
driving complete at site (portion in ground only to
18014 be measured)
Driving down wooden piles of 200mm diameter
either in vertical or battered work to approved
lines and level through various strata including

arranging all the appliances necessary for pile
complete at site (portion in ground only to be
18015 measured)
Providing anti – termite treatment to buildings
conforming to I.S.S. 6113 part II 1971 (revised)
including adopting precautions for health hazards
and safety measures as required therein with the
cost of all materials, chemicals, plants, equipments
required for the treatment and furnishing a
18016 guarantee for a minimum period of 10 years from
the date of completion including eradicating any
infestation of termite free of cost during the
guaranty period complete. (The payment will be
made on plinth of the building.
a Pre-construction sq.m 82.00

b Post construction sq.m 88.00
Boring holes vertically true to line and form for
R.C.C. bored piles of required diameter in all
strata except hard rock including removing slush,
all kinds of soil and rock, percolating water etc.

complete from the above to keep ready for
concrete after placing reinforcement but
excluding the cost of providing and laying
concrete and reinforcement.
a 500mm dia bore : 1) upto 12m from ground Metre 3132.00
1 Above 12m but upto 15m depth add 5% Metre 3289.00
2 Above 15m and upto 18 m depth add 5% Metre 3454.00
18017
b 400mm dia bore : 1) upto 12m from ground Metre 2171.00

c 300mm dia bore : 1) upto 12m from ground Metre 1569.00

d 600mm dia bore : 1) upto 12m from ground Metre 4094.00
1:1.5:3 (1 cement 1.5 coarse sand : 3 graded stone
aggregate 20mm nominal size) in bored piles of
specified diameter at the approved workability
18018
and compaction as per the discretion of the
Engineer-in-charge including all operation for
placing the concrete, lifting the casing in stages
etc. but excluding the cost of reinforcement.
a 500mm dia bore : 1) upto 12m depth from G.L. Metre 2409.00
1 Above 12m but upto 15m add 10% Metre 2650.00
2 Above 15m but upto 18 m add 10% Metre 2915.00

b 400mm dia pile : 1) upto 12m depth from G.L. Metre 1641.00
2 Above 15m but upto 18 m. depth add 10% Metre 1985.00

c 300mm dia pile : 1) upto 12m depth from G.L. Metre 1016.00
2 Above 15m but upto 18 m depth add 10% Metre 1229.00

d 600mm dia pile : 1) upto 12m depth from G.L. Metre 3322.00
of grade M 25 (mix design) with coarse sand and
graded granitic or basaltic aggregate 20mm
nominal size as per mix design requirements in
bored piles of specified diameter at the approved
workability and compaction as per the discretion
of the Engineer-in-charge including all operation
for placing the concrete, lifting the casing in stages
a 500mm dia pile : 1) upto 12m from G.L. Metre 2630.00
18019
b 400mm dia pile : 1) upto 12m from G.L. Metre 1782.00

c 300mm dia pile : 1) upto 12m from G.L. Metre 1095.00

d 600mm dia pile : 1) upto 12m from G.L. Metre 3640.00
of grade M 30 ( mix design) with coarse sand and
of the Engineer-in-charge including all operations
18020



d 600mm dia pile : 1) upto 12m depth from G.L. Metre 3670.00
1 Above 12m but upto 15m. Metre 4037.00
2 Above 15m and upto 18 m. Metre 4440.00
bored piles of specified diameter at the required
workability and compaction as per the direction
of the Engineer-in-charge including all operation
18021



of the engineer-in-charge including all operation
18022


2 Above 15m but upto 18 m. depth add 10% Metre 1348.00

Providing and fixing G.I. chain link mesh 6.35cm x
6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed
with angle iron posts and struts by G.I. or M.S.
staples at 20cms apart with welding with the iron
posts (placed at 3 meters centre to centre)
including providing barbed wire stiffeners (shall
18023 Metre 285.00
weigh 9.33 kg. per 100 meters minimum) at top
and bottom with barbed wire stiffers by binding
wires at 50cms centre to centre complete as per
the direction of the Engineer – in – charge (angle
iron posts struts, earthwork and concrete for
fencing posts and struts to be paid separately)
1.2 mt. height fencing with 1.20mt. R.C.C. posts of
standard 30 design placed at 3 mt. apart
embedded in cement concrete blocks, corner, end
& every 10th post to be strutted with 9
horizontal lines & two diagonals of barbed wire

9.33 kg/100 mt. minimum between two posts,
18024 fitted and fixed with G.I. stapples on wooden plug
tied to 6mm bar nib with binding wire (cost of
posts, struts, earthwork and concrete to be paid
separately)
a G.I. barbed wire Metre 184.00
b M.S. barbed wire Metre 232.00
Supplying 30 cms minimum girth jamba wood
18025 Metre 167.00
ballies at site to required length
1.2 mts. high fencing with 1.20 mt. jamba ballie
posts 30cm girth (min) placed at 2.5 mts. apart
embeded in cement concrete blocks, corner, end
and every 12th post to be strutted provided with 6
horizontal lines and two diagonal of barbed wire
18026 9.38 kg/ 100 mts. minimum between two posts,
fitted and fixed with G.I. staples including coal
tarring of ballies complete (cost of post, struts,
earth work and concrete to be paid for separately)
1.8 mts. high fencing with 2.50 mts. jamba ballie
posts 30 cms girth (min) placed at 2.5 mts. apart
embeded in cement concrete blocks, end and
every 12th post to be strutted provided with 9
horizontal lines and two diagonal of barbed wire
18027 9.38 kg/ 100 mts. minimum between two posts,
fitted and fixed with G.I. staples including coal
tarring of ballies complete (cost of post, struts,
earth work and concrete to be paid for separately)
2.4 mts. high fencing with 3.30 mts. jamba ballie
posts 30cms girth (min) placed at 2.5 mts. apart
embeded in cement concrete blocks, corner, end
and every 12th post to be strutted provided with
12 horizontal lines and two diagonal of barbed

wire 9.38 kg/ 100mts. minimum between two
18028 posts, fitted and fixed with G.I. staples including
coal tarring of ballies complete (cost of posts,
struts, earth work and concrete to be paid for
separately)
Providing weep holes of clear size 15 cms high
and 8 cms wide in concrete walls as per drawing
and direction of engineer in charge with 30 cms
thick jungle wood planks to form a box of clear
18029 sq.m 287.00
dimensions of the weep hole and keeping the
same in position with a slope of about 1 verticle to
20 horizontal towards drainage face while laying
the concrete complete.
Treatment of timber piles in a hot mixture of tar

and creosote oil in the proportion of 20 litres of
18030 coal tar to 25 litres of creosote oil for a period of 4 sq.m 261.00
minutes dipping including the cost of all materials
fuel and labour complete.
Providing and fixing R.C.C. 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggreate granitic or
basaltic stone aggregate 12.5 mm nominal size)
benches including finishing and plastering the
exposed surface with cement mortar 1: 3 (1
cement : 3 fine sand) thickness not exceeding
6mm on exposed surface to give smooth and even
surface except on the seat & the back of the bench
which shall be of marble mosaic chips finished,
rubbed and polished to granolithic finish top layer
18031 6mm thick with white black coloured marble Each 4574.00
chips of sizes from smallest to 4mm nominal size
laid in cement marble powder mix 3: 1 (3 white
cement : 1marble powder) by weight in
proportion of 4 cement marble powder mix : 7
marble chips by volume with under layer 12mm
thick cement plaster 1: 3 (1 cement: 3 coarse
sand) incl. finishing the rear and bottom sides
with waterproofing cement pant of approved
brand and required shade (3 or more coats) to
give an even shade complete
Plastering with cement mortar 1:4 (1 cement : 3
fine sand) 20mm thick with a floating coat of neat
18032 cement on walls for making black board including sq.m 476.00
painting with black japan paint (one or more
coats)
Providing at site 1.8m long RCC standard posts
18033 Each 690.00
with wooden plugs or 6mm bar nibs.
18034 Supplying at site 2.00 m long RCC standard struts Each 548.00
Providing and fixing prefabricated compound

gate of G.I. pipes 40 – 50 mm dia (medium) with
12mm M.S. square bars of G.I. pipes grill work as
per drawing including providing & fixing locking
arrangements, pintals, hold fast embedded in
cement concrete 1:2:4 (1 cement: 2 coarse sand :
18035 sq.m 5352.00
4 granitic or basaltic aggreate 20mm nominal
size) including applying priming coat with ready
mixed red lead paint and painting 2 or more coats
with superior ready mixed paint of approved
brand and manufacture in all shades as per
direction complete.
Solid PVC door frame in plain colour : Providing
and fixing factory made polyvinyl chloride (PVC)
Door Frame in plain colour manufactured of size
100mm x 45mm with a wall thickness of
5mm(±0.25), made out of extruded 5mm (±0.25)
thick PVC Sheet of Density 600 Kgs /Cbm
Manufactured by an ISO-9000 certified Company,
and by joining 3nos. heat bent PVC sheet sections.
The inside section of size 90x30mm shall be made
from plain colour PVC sheet of 5mm(±0.25)
thickness. The inside section will be covered by
sticking two sections of size 30x35mm and
18036 70x45mm made from 5mm(±0.25) thick plain Metre 443.00
PVC sheet. The frame shall be mitre cut at two
corners and joined with 4nos. of 150mm long
brackets of 15mm x 15mm M.S. Square tube. The
two vertical door frames are to be reinforced with
40mm x 20mm M.S. tube of 19 guage through out
the frame. The door frame shall be fixed to the
wall using 8/100mm long M.S. Screws through the
frame by using anchor fastners. A minimum of
4nos. of screws to be provided for each vertical
member & minimum 2nos. for horizontal member
etc. complete as per manufactures specification
and direction of Engineer-in-charge.
Solid PVC door frame in prelaminated colour :
18037 Metre 506.00
Providing and fixing factory made polyvinyl
chloride (PVC) Door Frame in Prelaminated
colour of the size 50mm width, 47mm height with
a wall thickness of 5mm(±0.25), made out of
extruded 5mm(±0.25) thick PVC Sheet of Density
600 Kg /Cbm Manufactured by an ISO-9000
certified Company , having pattam width of 50mm
and thickness of 10mm providing weather seal
Non-woven self adhesive gasket throughout the
frame. All three frame lengths reinforced with
19mmx19mm M.S.square tube of 19 gauge. mitre
cut at two corners and joined with 2nos. of
150mm long brackets of 15mmx15mm M.S.
square tube. The door frame shall be fixed to the
wall using 8/100mm long M.S. Screws through the
frame by using PVC fasteners. A minimum of 4nos.
of screws to be provided for each vertical member
& minimum 2nos. for horizontal member etc.
complete as per manufacturers specification and
direction of Engineer-in-Charge.
Providing and fixing 30mm thick factory made solid
panel (PVC) door shutter consisting of frame made out
of M.S.tubes of 19 guage thickness and size of 40mm x
20mm for stiles as well as top, lock & bottom rail.
M.S.Frame shall have a coat of metal primer of
approved make and manufacture. M.S.Frame shall be
covered with heat moulded prelam / Plain 'C' channel
made from 5mm (±0.25) thick PVC Sheet of Density
600 Kg /Cbm Manufactured by an ISO-9000 certified
Company, of size 30 thickness, 110mm width forming
stiles in which 100 mm should be flat & 5mm should
be taper, and 5mm (±0.25) thick, 135mm wide PVC
Sheet for top rail and bottom rail in which 125 mm
should be flat & 5mm taper on either side of panel. also
for lock rail 145 mm sheet ,125 mm should be flat & 5
mm taper on either side . An additional 5mm thick PVC
18038 strip of 20mm width is to be stuck on the interior side sq.m 2531.00
of the 'C' Channel using PVC solvent cement adhesive .
Panelling of 10mm Prelam PVC sheet to be fitted in the
M.S.Frame welded/sealed to the stiles & rails with
30mm wide x 5mm(±0.25) thick PVC sheet beading on
either side and additional 30mm wide PVC beading as
gap insert below top and bottom rail joined together
using solvent cement adhesive.15mm thick
(5mm(±0.25) x 3) , 20mm wide cross PVC sheet as gap
insert for top & bottom rail. Door to be fixed with
frame with 3 Nos. M.S powder coated butt hinges of
size 100mm*25mm*2mm and 50mm long steel screws
drilled suitable to pass through both the walls of the
M.S tube. Other hardware of door should be fixed with
25mm*8mm size steel screws etc. complete as per
direction of Engineer-in-charge, manufacturer's
specification and drawing.
Providing and fixing 30mm thick FACTORY MADE
BOTH SIDE PRELAM SOLID PANEL PVC DOOR
SHUTTER consisting of frame made out of M.S
tubes of 19 guage thickness and, size 19 X 19mm
for styles and 15 X 15mm for the top and bottom
rails, M.S frame shall have a coat of metal primer
of approved make and manufacture . M.S.frame
shall be covered with heat moulded PVC ‘C’
channel made from 5mm(±0.25) thick sheet of
density 600kg/cbm manufactured by an ISO-
9000 certified company, of size 30mm thickness,
50mm width to form styles and 5mm(±0.25) thick
and 75 mm wide PVC sheet for the top rail, lock
rail and bottom rail on either side of the panel . An
additional 5mm(±0.25) thick PVC strip of 20mm
18039 sq.m 3386.00
width is to be stuck on the bottom side of the 'c'
channel . Panelling of 5mm(±0.25) thick PVC sheet
to be fitted inside the M.S frame welded/sealed to
the styles and rails with 5mm(±0.25) x 30mm PVC
sheet beading on either side and joined togther
with solvent cement adhesive etc., 10mm thick
( 5mm(±0.25) x 2nos.) , 20mm wide cross PVC
sheet as gap insert for the top rail & bottom rail.
Door to be fixed to frames with 3 nos. M.S powder
coated butt hinges of size 100mm*25MM*2mm
using 32mm long steel screws drilled suitable to
pass through both the walls of the M.S tube. Other
hardwares should be fixed with 19*6mm size
steel screws, Complete as per direction of
Engineer-in-Charge.
Solid core PVC moulded door in plain colour
Providing and fixing 35mm thick factory made
Moulded door shutter- Wood free consisting of
frame made out of M.S. tubes of 19gauge thickness
and size of 25mm x 25mm for stiles, top and
bottom rails. M. S. frame shall have a coat of steel
primers. The inner panel shall consist of 25mm
thick High Density EPS / PUF conforming to IS
4671-1984 bonded with 2mm thick sheet of
density 700kg/cbm manufactured by an ISO-9000
certified company termite proof, water proof and
fire resistant moulded PVC Sheet with 2, 4, 6
raised panel design in different plain and / or
18040 prelam colours after routing the Moulded design sq.m 4506.00
on one side & 2mm plain and /or prelam PVC
sheet on other side of the EPS./ PUF The edge of
panel to be sealed with lipping of 10mm wide PVC
sheet baton (made by sticking 2nos. PVC sheets of
5mm( ) thickness using PVC solvent cement) and
stile sides 25mm (5mm x 5) thick and 30mm
width PVC Sheet fitted along M.S. tube for lock
provision & for lock height 5mm( ) thick PVC
sheet of size 150mm x 100mm fixed with upper &
lower face of inner side of EPS Panel
etc. complete as per direction of Engineer-in-
charge, manufacturer's specification and drawing.
Solid core PVC moulded door inprelaminated
colour : Providing and fixing 35mm thick factory
made Moulded door shutter - Wood free
consisting of frame made out of M.S. tubes of
19gauge thickness and size of 20mm x 40mm for
stiles as well as top, bottom & lock rail . M. S.
frame shall have a coat of metal primer of
approved make & manufacturer. The inside panel
shall consist of 20mm thick multichamber hollow
PVC section of 1mm wall thickness, bonded using
solvent cement / cynoacrylate adhesive with
18041 5mm(±0.25) thick moulded PVC sheet of Density sq.m 5566.00
600 Kg/cbm manufactured by an ISO-9000
certified company . with 2, 4, 6 raised panel design
in plain / prelam colours after routing the
Moulded design on one side of the inside panel .
5mm(±0.25) plain / prelam PVC sheet to be
pasted using solvent cement / cynoacrylate
adhesive on other side of the Hollow PVC section.
All the four edge of the panel to be sealed with
lipping of 10mm thick & 20 mm wide PVC sheet
baton (made by sticking 2Nos. foam PVC sheets of
5mm(±0.25) thickness using PVC solvent cement
adhesive.Door edge lipping to be painted with
PVC ink of matching colour of Plain/Prelam
mouded PVC sheet of door .20 mm thick (5 mm x
4 nos.)thick PVC sheet to be given for lock
provison at lock height . Door to be fixed with
frame with 3 nos. stainless steel butt hinges of size
100mm*25mm*2mm and 50mm long steel screws
drilled suitable to pass through both the walls of
the M.S tube.other hardwares should be fixed with
25mm*8mm size steel screws etc, complete as per
direction of Engineer-in-charge, manufacturer’s
specification and drawing.
PVC false ceiling grid type : Providing and fixing
PVC False Ceiling consisting of 600mm x 600mm,
5mm(±0.25) thick Plain PVC sheet of 600 kg/Cbm
Density Manufactured by an ISO-9000 certified
Company, used as panel insert in a frame work
made using anodized aluminum T- section of sizes
1” x1” (25x25mm, 19 gauge or 1mm thick) in
square pattern of grid sizes of 2’x2’(600x600mm).
18042 sq.m 1333.00
The aluminum frame work is supported from the
ceiling with the help of 'J' hook and G.I. wire /
6mm M.S. rods of required sizes to maintain
proper level etc. The aluminum framework is
supported on side wall with the use of aluminum
L-section of size 1”x1” (25x25mm) angles etc.
Complete as per direction of Engineer-In-charge,
manufacturer’s specification & drawing.
PVC wall paneling :Providing and fixing PVC sheet
Wall Paneling of thickness 5mm (±0.25)
consisting of panels of desired size stuck on inner
frame work of 50mm wide strips of 5mm (±0.25)
thick Prelam PVC sheet. The panel & strips shall
be of 600 kg/Cbm Density Manufactured by an
ISO-9000 certified Company. The strips should
have in their center a grove of 6mm width and
1mm depth for sinking the head of the screw used
to fix the strips to the wall vertically at an equal
18043 interval of 10” between two PVC strips. The PVC sq.m 1768.00
strips shall be fixed to the wall using 65mm long
M.S. screws through the groove in the strip by
using PVC fasteners. The distance between two
screws shall not be more than 200mm. A groove
of 2mm may be left at the joint of two panels for
aesthetic looks. The exact size of the panel and
correspondingly of the grid may vary depending
on the size of the wall. Optionally a strips of
5mm(±0.25) thick PVC sheet of width 75mm
feathered at the edges shall be stuck at the places
where two panels are joined, using solvent
cement.
PVC insulated wall paneling : Providing & fixing
Insulated PVC wall Paneling shall consist of PVC
Insulated panels having wall thickness
2mm( ±0.25) PVC sheet of 700 Kg/CBM density
manufactures by an ISo - 9000 certified company
and the desireed thickness of EPS ( dependent on
ther insulation required) screwed into the wall
using screws of adequate length. The screw shall
be placed at a distance of 150 mm and shall be 25
mm from the edge of insulated panel on all from
18044 side of the panel. The PVC strips are 4 mm sq.m 2382.00
( ±0.25) thick PVC sheet of width 75 mm
feathered at the edges shall be stuck using solvent
cement adhesive at the palces where two panels
are joined ,so as to cover the screw of both the
panels, using solvent cement 90 degree sheet heat
bend strips of 4 mm thick PVC sheet of width 75
mm X 75 mm feathered at the edges shall be stuck
at wall joints/ Pillars etc. complete as per the
direction of engineer in charge, manufactures
specification & drawing.
18045 SOLID PVC WINDOW FRAME AND SHUTTER: sq.m 6059.00
Frame: of size 50mm x42mm consisting of frame
made out of M.S. tube of 19 gauge of size 15mm x
15mm and Solid PVC sections made from 4.25mm
thick sheet (4mm (±0.3) PVC foam sheet
laminated with 0.25mm Rigid PVC sheet) of
density 900 kg/cbm density manufactured by an
ISO-9000 certified company, suitably joined using
PVC solvent cement so as to prefixed in wall. In
wall using hold fasts M.S. window grill should be
fixed suitably with Solid PVC sections mitre cut on
corners complete as per direction of Engineer-in-
charge and manufacturer's specification.
Shutter: consisting of frame made out of M.S. tube
of 19 gauge of size 15mm x 15mm for style, top,
bottom rail. M.S. frame shall have a coat of steel
primers of approved make and manufacture. M.S.
frame shall be covered with 4.25mm thick sheet
(4mm (±0.3) PVC foam sheet laminated with
0.25mm rigid PVC sheet) of density 900 kg/cbm
density manufactured by an ISO-9000 certified
company, white colour rigid heat moulded PVC 'C'
Channel of size 62mm x 25mm x 50mm of the
window shutter forming stiles & rails. Glass panel
and Wire mesh will be fitted externally in the
clear space available between stiles and rails and
fixed using window shutter PVC beading of size
12mm x 8mm complete as per direction of
Engineer-in-charge and manufacturer's
specification.
Long open time epoxy bonding agent for bonding
old concrete to new concrete
Providing and applying structural grade bonding
agent a two component, solvent less epoxy resin
based. It shall be formulated to meet the
requirement of ASTM C881 Type 2, Grade 2, Class
B &C. The Bonding agent shall exhibit minimum
18046 open time of 6 hours and shall exceed the tensile sq.m 724.00
strength of concrete in terms of its adhesive bond
strength. This epoxy system on mixing yields an
adhesive for internal or external bonding of
renderings, granolithic toppings, and new
concrete to old concrete. Item is inclusive of all
tools, plant, labour, materials including necessary
scaffolding, etc complete.
Acrylic bonding agent for bonding repair mortar
Providing and applying on a well prepared
surface polymer bonding agent. The product shall
have minimum solids of 40%. The polymer shall
18047 be capable of being used as bonding agent and
sq.m 615.00
shall have pull-off bond strength not less than 1
MPa. All scaffolding, ladders, supporting materials
etc. complete. Rates shall be inclusive of all labour,
materials, tools and plant etc. complete.
COATINGS
High build, Crack-bridging, Elastomeric,

18048 protective and waterproof coating for Concrete & sq.m 720.00
Masonry specially for concrete surfaces of bridges
vertical surface which is single component, high
performance, acrylic resin based coating for long
term protection of concrete & masonry from
aggressive atmospheric gases such as, carbon
dioxide, sulphur dioxide and chloride ions. The
product shall be applied in minimum two coats to
achieve total DFT of 300 Microns. The product

must be crack-bridging high elongation type with
elongation at break, exceeding 300% & tensile
strength exceeding 2.5 MPa. The system shall
exhibit excellent bond strength with the substrate
at least exceeding 1.5 MPa, when tested as per
ASTM D 4541. All scaffolding, ladders, supporting
materials etc. complete. Rates shall be inclusive of
all labour, materials, tools and plant etc. complete.
Pitch extended epoxy coating to protect marine

and waste water handling structures coal tar

epoxy protection coating in splash zone, sewage
treatment plants

concrete surface which is high build, pitch
extended epoxy , a 100% solids, solvent free,
tough abrasion resistant protective coating. The
product shall exhibit excellent bond strength with
the substrate at least exceeding 2.5 MPa, when
18049 tested as per ASTM D4541. The product shall be
formulated to have high build thickness exceeding
150 microns per coat on average and shall be sq.m 468.00
applied to achieve overall thickness of 300
microns in two coats. The product shall be
formulated to resist exposure to accelerated
weathering test as per ASTM D4587 and shall not
exhibit any flaking or blistering. All scaffolding,
ladders, supporting materials etc. complete. Rates
shall be inclusive of all labour, materials, tools and
plant etc. complete.
Corrosion inhibitor treatment specially for splash

18050
zone of bridge, jetty concrete surfaces
surface penetrating deeply into concrete and
providing organofunctional molecules to inhibit
the electrochemical corrosion process between
the rebar and the chloride ions, oxygen and
moisture.The product shall be applied at an
average rate of 600 ml/m2 in two to three coats
The product shall exhibit excellent depth of
sq.m 2884.00
penetration and shall react with the concrete
substrate and form a permanent chemical bond.
The product shall have measurable reduction in
the corrosion current of concrete after 28 days of
application at site. All scaffolding, ladders,
supporting materials etc. complete. Rates shall be
inclusive of all labour, materials, tools and plant
etc. complete.
Deep penetrating and reactive water repellent

coating for protection heritage structure surfaces

vertical /Horizontal surface which is solvent free
liquid based on a monomeric alkylalkoxysilane.
The amount to be applied depends to a large
18051 extent on how absorbent the substrate is. In
practice, it has to be determined by a trial
impregnation. The product shall be based on pure sq.m 786.00
silane formulation, and free of siloxane and
solvents.The material shall be mixed and applied
fully in accordance with the manufacturer's
instructions. All scaffolding, ladders, supporting
GROUTS
18052 Low viscosity epoxy resin with long pot life for

crack injection for structural repairs.
Providing and Supplying which is two-component
epoxy injection resin, low viscosity resin system
having viscosity less than 350 cps at ambient
temperatures. The injection resin shall be high
strength in excess of 55 MPa at 1 day & 65 MPa at
7 days. The product shall exceed 55 MPa in
flexural strength at 7 days and shall exceed 15
MPa in slant sheer bond strength. The product
shall have minimum pot life of 30 minutes at kg 1691.00
ambient temperatures. The injection resin shall
comply with ASTM C881, Type 1 & 4, Grade 1,
Class B & C. The injection resin must have pass
rating for shrinkage test as per ASTM C881 and
shall be impermeable.. All scaffolding, ladders,
etc. complete.
Rapid curing flowable epoxy grout with high early

strength under base plates.
Providing and Supplying which is rapid-curing,

high flow, filler-extended epoxy resin grout. The
grout shall exhibit high early strengths by
18053 exceeding compressive strength of 75 MPa at 1
day and 100 MPa at 7 days; shall exceed flexure
litre 766.00
strength of 25 MPa at 7 days. The formulation
shall be of 100% solids and free of solvents. All
scaffolding, ladders, supporting materials etc.
complete. Rates shall be inclusive of all labour,
Ultra-high strength, high-precision, dual

18054 shrinkage compensated, free flow cementitious
grout for machine , column base plates
Providing and Supplying approved which is dual
shrinkage-compensated, cementitious grout shall
be hydraulic-cement based free-flow, high
strength grout that complies with ASTM C1107.
The grout shall have compressive strength
minimum of 35 MPa at 1 day and 75 MPa at 28
days; flexure strength minimum of 9 MPa at 28
days. The grout must exhibit positive volumetric
expansion in plastic stage as well as hardening litre 197.00
stage. Grout must be flowable at 0.15 w/c ratio
and shall have fresh wet density in excess of 2200
Kg/m3. The grout must be accredited by reputed
testing institute for dynamic load resistance test
of 2 million cycles with no sign of cracking or
strength loss. All scaffolding, ladders, supporting
Pure epoxy resin based anchoring mortar for

anchoring of rebars
Providing and Supplying which is a two-
component, thixotropic, pure epoxy resin based
chemical anchoring mortar. The product is
specially designed for applications where heavy
loads under critical conditions are to be fixed in
concrete. Both components of Masterflow® 935,
18055 packed in a single cartridge with separate
compartments, are correctly mixed in the mixing litre 9001.00
nozzle during application. The product should be
styrene free fomultation and shall have very low
shrinkage, even on big diameters. All scaffolding,
shall be inclusive of drilling of requisite holes in
concrete, all labour, materials, tools and plant etc.
complete.
High strength, dual-shrinkage compensated,
18056
micro-concrete for concrete repairs.
Providing and laying which is duel shrinkage-
compensated, cementitious micro-concrete, high
strength, high flow, single component
cementitious formulation. The repair micro-
concrete shall have compressive strength
minimum of 55 MPa at 7 day and 65 MPa at 28 litre 189.00
days. The repair mortar shall not require polymer
bonding agent as primer. All scaffolding, ladders,
etc. complete.
High strength, fibre reinforced, thixotropic repair

mortar.

vertical surface which is duel shrinkage -
compensated, cementitious patch repair mortar,
high strength single component mortar modified
with fibres. The repair mortar shall have
18057 compressive strength minimum of 20 MPa at 1
day and 70 MPa at 28 days. The repair mortar litre 223.00
shall not require polymer bonding agent as
primer and shall be thixotropic consistency,
capable of applying 50mm thick in single layer. All
One component, anti-corrosion primer for

reinforcement.
vertical surface Thorostructurite primer which is
anti-corrosion primer for steel reinforcement
shall be a single component polymer- modified,
cement-based compound. The primer shall be
formulated to provide dual protection of a
polymeric barrier and an integral corrosion-
18058 inhibiting system. The primer shall exhibit quick
drying within 10 minutes and shall have adhesive litre 533.00
bond strength greater then 5 Kg/cm2 when tested
as per ASTM D4541. The product shall exhibit
good abrasion resistance by maintaining less than
60 mg/1000 cycle wear loss when subjected to
ASTM D4060, CS 17 wheel on Taber abrasion
machine. All scaffolding, ladders, supporting
18059 STRUCTURAL RETROFITTING
Mbrace Glass and Carbon fibre sheets for

structural retrofitting.
Providing and applying on a well prepared primed
surface MBrace Fibre system as a externally
bonded fibre reinforcement enveloped in MBrace
saturant resin.Primer used shall be Mbrace
primer or equivalent . Primer is the concrete
bonding adhesive for use with the fiber
Composite Strengthening System. It is a 100%
solids low viscosity epoxy resin able to cure in the
presence of moisture and at temperatures as low
as 2°C.When applied to sound concrete PRIMER
gives high tensile bond strength to the fiber
COMPOSITE STRENGTHENING SYSTEM. MBrace
Saturant resin or equivalent is the easy-to-apply,
100% solids material that permits adhesion of a
lightweight sheet, within the fiber Composite
Strengthening System. When cured with the tow
sheet, Saturant resin produces a high performance
composite system for use in external structural
repair or upgrade applications. Concresive 2200
putty or equivalent shall be used for the concrete
smoothing for use with the fiber Composite
Strengthening System. It is 100% solid, non-sag
paste epoxy resin material.
All scaffolding, ladders, supporting materials etc.
Mbrace glass fiber ( Mbrace G sheet EU 900 @900

GSM(Glass Fibre Unidirectional))
a The product shall have Modulus of elasticity of

73KN/mm2 and Tensile strength at break of
sq.m 3746.00
3400N/mm2. and Ultimate strain of 4.5
%.
Unidirectional Carbon Fiber Reinforcement
System High Tensile CF) or equivalent.
b The product shall have Modulus of elasticity of
73 KN/mm2 and Tensile strength at break of
sq.m 5358.00
3800N/mm2. and Ultimate strain of
1.55 %.
c Unidirectional Carbon Fiber Reinforcement
The product shall have Modulus of elasticity of
73 KN/mm2 and Tensile strength at break of
sq.m 6293.00
3800N/mm2. and Ultimate strain of
1.55 %
Structural retrofitting with Carbon Mbrace

Laminate.
Providing and applying on a well prepared primed
surface MBrace carbon fiber laminate system as a
externally bonded fibre reinforcement with
MBrace adhesive of BASF make or
equivalent.Primer used shall be Mbrace primer or
equivalent . Primer is the concrete bonding
adhesive for use with the fiber Composite
Strengthening System. It is a 100% solids low
viscosity epoxy resin able to cure in the presence
of moisture and at temperatures as low as

2°C.When applied to sound concrete PRIMER
gives high tensile bond strength to the fiber
COMPOSITE STRENGTHENING SYSTEM. MBrace
Laminate Adhesive is a two component
solventless epoxy system which when mixed
18060 yields a non slumping, fast curing adhesive. sq.m 2497.00
concresive 2000 puttyor equivalent shall be used
for the concrete smoothing for use with the fiber
Composite Strengthening System. It is 100% solid,
non-sag paste epoxy resin material.
All scaffolding, ladders, supporting materials etc.
Mbrace carbon laminate grade 165/2500 -50x1.4.
The product shall have Modulus of elasticity of

165KN/mm2 and Tensile strength at break of
2500N/mm2. and Ultimate strain of 1.3 %.

Laminate should essentially have peel ply system
on both the sides and surface of the laminate shall
be rough for good bonding with the adhesive.
WATERPROOFING
18061 Spray applied fast curing, heat resistant

polyurethane seamless waterproofing membrane
horizontal surface Coniroof 2111 of BASF make or
equivalent Supply and Installation of BBA
Approved spray applied waterproofing membrane
system, a multi-layered system comprising,
primer, waterproofing membrane. The product
shall have the green label certificate. The primer
shall be CONCRESSIVE 2525 or equivalent, a two
component, solvent free epoxy resin based. The
fast-drying primer shall be CONCRESSIVE 2525 or
equivalent, a two component, solvent free epoxy
resin based. It shall be formulated to meet the
requirements of non tainting for usage in food
sq.m 4574.00
storage and potable grade structures. It shall be
fully compatible with CONCRESSIVE Range of
repair mortars. Dried, graded MASTERTOP SRA
no. 3 sand or equivalent is immediately and
evenly spread over the entire wet surface by hand
or mechanically. When sufficiently cured the
surface is vacuumed to remove any loose sand.
Waterproofing Membrane: The waterproofing
membrane shall be CONIPUR M 800 or equivalent,
a solvent free two component spray applied
system. Ladders supporting materials etc.
It is highly reactive and can only be applied by
special, two component spray equipment. UV Top
Coat: The top sealer for use on exposed areas shall
be Conipur TC459 or equivalent based on
aliphatic polyurethane, pigmented, single
component; moisture curing, UV and weather

resistant. Conipur TC459 or equivalent should be
stirred well and applied evenly by spraying. The
rates are inclusive of labor, tools and tackles. All
An elastomeric, cementitious, waterproof coating
18062
for concrete and masonry.
vertical surface Masterseal 550EL of BASF make
or equivalent elastomeric flexible, two component
polymers modified cementitious composite
system that requires no addition of water at the
site. The product shall be applied in minimum two
coats to achieve total DFT of 1mm. The material
shall be mixed and applied fully in accordance
with the manufacturer's instructions. The product
shall exhibit at least 40% elongation at ambient & sq.m 515.00
30% elongation in under water condition with
tensile strength greater then 20 Kg/cm2. The
product shall resist 1.5 bars pressure when tested
as per DIN 1048 at 2mm DFT. When applied at
2mm DFT, elastomeric coating shall be able to
bridge crack up to 0.5mm width. All scaffolding,
shall be inclusive of all labour, materials, tools and
plant etc. complete.
Synthetic membrane of plasticized PVC in Fire

resistant version for basement
Providing and laying on a well prepared
horizontal / vertical surface 2 mm Masterpren BG
FR of BASF make or equivalent which is a synthetic
membrane made of plasticised PVC of fire
resistant manufactured by twin coloured co-
18063
extrusion method.The product shall have a
sq.m 2071.00
Puncture resistance of atleast 1100 mm as per
DIN 16726-5.12.All scaffolding, ladders,
supporting materials , fuse welding etc. complete.
Rates shall be inclusive of all labour, materials,
tools and plant etc. complete. Rate shall be paid on
net area covered.
18064 Synthetic membrane of masterpren TPE for roof
Providing and laying on a well prepared roof
surface 1.2 mm Masterpren TPE of BASF make or
equivalent which is modified polyolefin, in two-
colour version (sand grey/black), obtained by co-
extrusion, which allows it to be produced in a
single layer a liner with different physical-
chemical properties on the two sides. It has a
sq.m 2265.00
polyester mesh reinforcement.The product shall
have a Tear Resistance of 300 N as per DIN
53363.All scaffolding, ladders, supporting
all labour, materials, tools and plant ,fuse welding
etc. complete. Rate shall be paid on net area
covered.
Liquid, cold-applied elastomeric waterproofing

membrane system.
vertical surface Sonoshield HLM 5000 of BASF
make or equivalent one-component,moisture-
curing, bitumen-modified polyurethane
elastomeric waterproofing membrane for exterior
18065 below-grade or between-slab applications. The
product shall be applied in minimum two coats to
sq.m 1299.00
achieve total DFT of 1.25 mm. The materials shall
be mixed and applied fully in accordance with the
manufacturer's instructions. This material has got
very high Elongation Almost >600%. All
Providing fusion bonded epoxy to reinforcing bars
as per IS:13620-1993 specification for a thickness
of 175 +- microns including testing of coating at
plant, extra cost for careful handling using PVC
coating, binding wires instead of G.I. wires,
18066 tone 16396.00
touching up the material supplied, repair work
etc. complete as per detailed specifications
MORT&H section 1600 etc. complete and as per
the Directionof Engineer in charge.(Steel to be
paid separately)
Removing old loose bottom or side cover of RCC
slab, beam, columns etc. rubbing surface of
concrete steel using wire brush and applying 2
coats of Alkaline rust converting primer (Feovert)
after a waiting time of 6 hrs between coats and
then applying another anti corrosive protective
coating system ) for reinforcement bars (IPNet-
RB) Conforms to IS-2770 Part-1 (Pull out Test)
ASTM-3963-86 (Adhesion Test) and then applying
18067 sq.m 2086.00
concrete penetrating corrosion inhibitor (EPCO-
KP100) and applying bonding new to old concrete
(Epibond) Conforms to ASTM-C-882-87 and
plastering on the fresh bond coat with Polymer
Modified Mortar (Monobond) with 20mm C.M 1:3
and finishing coat of 6mm C.P 1:3 (1 Cement : 3
Sand ) incl. cost of transport etc. as per dir of EIC.
All the chemicals will be of Krishna Conchem
Products Pvt. Ltd. or Equivalent.
Applying two coats of alkaline rust converting

primer, Feovert on the rebars, after wire brushing
to remove loose rust spalls, with time interval of
18068 sq.m 142.00
6-8 hour between the coats. incl. cost of transport
etc. as per dir of EIC. All the chemicals will be of
Krishna Conchem Products Pvt. Ltd. or Equivalent.
Applying IPNet-RB (Anti – corrosive coating) to
the exposed reinforcement in two coats by brush
with time interval of minimum 7 hours between
each coat. Conforms to IS-2770 Part-1 (Pull out
Test) ASTM-3963-86 (Adhesion Test). Sprinkling
18069 sq.m 353.00
dry quartz sand over the second coat of IPNet-RB
when freshly applied etc. complete. incl. cost of
transport etc. as per dir of EIC. All the chemicals
will be of Krishna Conchem Products Pvt. Ltd. or
Equivalent.
Providing and mixing EPCO KP 200 of Krishna
Conchem Products Pvt. Ltd. or approved equivalent
concrete penetrating corrosion inhibiting ad-
18070 Cu.m. 638.00
mixture in the concrete at the rate 2 kg per cum.
Of concrete. (Admixture to be added into wet
concrete as per manufacturer's specification)
Applying EPCO-KP-100, concrete penetrating
corrosion inhibitor by spray/ brush to the
concrete so as to maintain the dosage of 4 Sqmt /
18071 Lt. In one or two application etc. complete. incl. sq.m 253.00
cost of transport etc. as per dir of EIC. All the
chemicals will be of Krishna Conchem Products
Pvt. Ltd. or Equivalent.
Applying one coat of structural grade epoxy
bonding coat (EPIBOND) Conforms to ASTM-C-
882-87 to the prepared concrete surface to be
repaired / strengthened. This is applied prior to
the application of polymer repair mortar
/microconcrete to have monolithic action
18072 between old concrete surface and new polymer sq.m 527.00
repair mortar /micro-concrete. It is essential to
ensure that the concrete surface is free from loose
material, dust, dirt, etc., before applying bonding
coat. incl. cost of transport etc. as per dir of EIC.
Repairs to the deteriorated /damaged areas of
RCC elements in the structures shall be carried
out by using Polymer modified repair mortar. The
polymer modified mortar is applied when the
epoxy bonding coat is still tacky. In one
application 20 mm thickness shall be built.
Subsequent layer shall be built with one bond coat
of Polymer modified cement slurry. The Polymer
modified repair mortar shall have the following
specifications:
18073 sq.m 1130.00
• Cement (OPC) : 100 kg
• Clean river sand - 2.36 mm down : 300 kg Or 30-
80 Graded quartz sand
•Polymer latex (Monobond) : 10 kg
• Water : 30 litre (Approx)
Cure by spraying periodically with water for 3
days and allow to dry for next 5 days. incl. cost of
Equivalent.
Waterproofing of sunken slabs, toilet blocks,
terraces on slabs under brickbats, roofs,
watertanks. Cleaning the surface and filling cracks
(if any), applying EPCO ACR wherever necessary,
Providing and Moistening the surface with water
to render it saturated. Mix Cement and Monobond
WF in the ratio of 1.25 kg to 1 by weight and stir
18074 sq.m 691.00
continuously. Apply minimum 2 coats with an
interval of 12 hours minimum between the coats.
Fix fiber mesh while the first coat is still tacky.
Cure with sprinkling of water 3-4 times a day. incl.
cost of scaffolding transport etc. as per dir of EIC.
Products Pvt. Ltd. or Equivalent
Providing & mixing SUPERCON-333 in external
plaster as plasticizer for workability improvement
& to make the plaster denser while reducing the
water cement ratio, at 200gms per bag of cement.
To be used in plaster externally to concrete stone
or brick surfaces using approved screened sand
18075 sq.m 40.00
including preparing the base, watering and
applying incl. cost of transport etc. as per dir of
EIC. This does not include the cost of plaster
material & plastering labourAll the chemicals will
be of Krishna Conchem Products Pvt. Ltd. or
Equivalent.
Applying 2 coats of Aliphatic Acrylate, Anti-
corrosive and Anti-Carbonation coating system
(solvent based) on the external phase of plaster.
Thoroughly wire brush the surface of plaster to
remove loose dust. Apply Monopol-456 by brush
with Intercoat interval of 6 hours between the
18076 coats. Ensure uniformity of material while taking sq.m 458.00
from the can by shaking it thoroughly. Cleaning of
brushes by thinner. Ensure the surface of plaster
to be dry prior to application. incl. cost of
Equivalent.
Providing and Applying one coat of primer
followed by 2 coats of Aliphatic Acrylic system-
elastomeric, Anti-corrosive and Anti-Carbonation
coating system (water based) on the external
phase of plaster. Thoroughly wire brush the
surface of plaster to remove loose dust. Apply
18077 sq.m 240.00
Monopol-456-HB by brush with Intercoat interval
of 6 hours between the coats. Ensure uniformity
of material while taking from the can by shaking it
thoroughly. incl. cost of transport etc. as per dir of
EIC. All the chemicals will be of Krishna Conchem
Cleaning the surface and filling cracks (if any),

applying epoxy putty wherever necessary,
Providing and applying 3 coats of High
performance moisture compatible corrosion
resistant Food grade non toxic epoxy stearate
coating (WATERSEAL) having impermeable film
withstanding to hydrostatic pressure up to 5
kg/cm2 with a DFT of 250 microns on the
18078 sq.m 778.00
prepared RCC surface. If there is honey combing
or excessive unevenness in the surface then
10mm plaster in CM 1:3 should be applied on the
entire surface followed by application of 2 coats of
WATERSEAL with a DFT of 150 microns. incl. cost
of scaffolding transport etc. as per dir of EIC. All
the chemicals will be of Krishna Conchem Products
Providing and applying two coats of Coal Tar

Epoxy (Corroseal TE 321) on concrete surface
including preparing the surface by cleaning using
wire brushes, cloth, broom etc.Complete as per
18079 manufacture specification for portion below sq.m 328.00
ground level. Conforms to ASTM-B-117. Incl. cost
of transport etc. as per dir of EIC. All the chemicals
Equivalent.
Providing and applying 2 coats of Anti-corrosive,
chemically resistant coal tar extended epoxy
coating system for below & above waterline
application (Normal Wet & Underwater
Application) (EPCO-2020-TX) having an adhesion
18080 of minimum 3.0 N/mm2 (ASTM-D-4541) and a sq.m 358.00
DFT of 300-350 microns in 2 coats and having
excellent chemical resistance against acids,
alkalies and salts. Incl. cost of transport etc. as per
dir of EIC. All the chemicals will be of Krishna
Conchem Products Pvt. Ltd. or Equivalent.
Crack filler for plasters, IPS, cement sand screeds

and non – structural cracks.
Do Not open the cracks, Clean the cracks so as to
free them from oil, dust, loose particles etc.
Moisten the surface with water, Fill cracks with
EPCO – ACR using spatula or a putty knife. While
18081 applying avoid formation of cavity or bubbles. Metre 134
After filling , allow the surface to dry for at least
24 hours. Apply in layers at 24 hours interval. If
the depth of the crack is more than 10mm. incl.
cost of scaffolding transport etc. as per dir of EIC.
Products Pvt. Ltd. or Equivalen.
Drilling holes of specified dia., fixing it with PVC

nozzles, sealing the diaphragm with Epoxy
Sealant, EPCO-1010, allow it air cure for minimum
8 hours, cutting nozzles after grouting and sealing
it with EPCO-1010 etc. complete as directed.
Injecting low viscous high molecular weight
polymer, MONOPOL with pressure created by
18082 compressor and epoxy injector with accessories. sq.m 2331.00
The pressure shall be not exceeding 3-4 kg/cm2 .
Grouting to be done in cracks till the nozzle
refuses to accept the grout or it flows from the
adjacent nozzles etc. complete. incl. cost of
scaffolding transport etc. as per dir of EIC. All the
chemicals will be of Krishna Conchem Products
GROUTS for Crack Injection Grouting
Ultra-fine cementitious single component crack
injection for structural repairs.
Providing and supplying Ultra-fine cementitious
grout Alccofine 1109SR manufactured by M/s
Counto Micro-fine Products Pvt Ltd, Goa or
equivalent. Material should comply to IS 14343
18083 sq.m 293.00
forMarsh Cone Viscosity of 35 to 45 seconds, shall
have the Particle Size Distributionwith d95 <12
microns and minimum compressive strength of
grout more than 30 MPa at 7 days. Water to grout
powder ratio should not be more than 0.6 for
marsh cone viscosity and compressive strength
test.
Galvalume Flashings: Supply & Fixing of 0.5 mm
18084 thick Galvalume capping / Flashing from inside Metre 470.00
for Ridge and skylight areas.
Aluminium Flashings: Supply & Fixing of 0.90 mm
thick Aluminium Flashing as specified under first
18085 Metre 1174.00
layer above In same PVDF finish of Panels up to
578mm Girth
Skylight - Danpalon Or Equivalent Day light Panel
System: Supply & fixing of 16mm thick 600 mm
width MULTIWAL MULTICELL polycarbonate
system consist of: The panels shall be uniform in
color with an integral Microcell core. In a cross
section, the core shall be constructed of tight cells
with 6 walls. Panels will be supplied with Vertical
18086 Standing Seam at both sides of the panel Snap-on sq.m 7433.00
connector to interlock the panels shall have a
grip-lock double tooth locking mechanism to
ensure maximum uplift capability & shall be of
same color as that of panel for aesthetic appeal.
NOTE : Necessary Steel structure to be provided
by the Steel fabricator. Skylights framework to be
raised by 200 mm from Roof Pan level.
Supply & fixing of Latchway’s or equivalent fall
protection system with Constant Force® Post
suitable for aluminium roofing sheets using 4
Aluminium clamps as per the layout provided by
18087 Metre 7942.00
the architect/engineer in charge.
Note: Removable Transfasteners and Lanyard not
included in this as they are generally available
with cleaning contractors.
Providing, fabricating & fixing in position high per cm
performance, cross linked, closed cell, non- depth
absorbent, cellular polyethylene joint filler with per cm
18088 5.00
nominal density 60-100 kg/m3 for expansion width
joints. The material should have recovery of min. per m
95% after 50% compression. length
Providing and fixing 50x50mm snap-on
PVC/Vinyl/ Acrylic 90 Degrees angles surface
mounted corner guards as edge protection. It
should have hi impact resistance, chemical and
stain resistance. The inner extruded aluminium
continuous retainer should be fixed to
18089 Metre 1153.00
wall/concrete surface with non corrossive
fastners which are compatible with aluminium
retainer. Adjustable top & bottom matching end
caps, high impact vinyl acrylic snap-on matt
finished, consisting of PVC cover, base, top end etc
complete. 900 to 1200 high.
Providing and fixing 140x38mm Hand rail cum
Crash Guard fixed on wall/concrete at about 900-
1000mm high from finished floor comprising of
continuous aluminium rail retainer with bumper
18090 cushion, Quick lock bracket, adjustable rail Metre 2049.00
mounting base with impact absorbing strip,
in/out corner conditions, end cap and high impact
PVC/ vinyl/ acrylic snap-on textured surace cover
complete in all respects.
Providing & fixing in position traction matting
antiskid clear tape 2 inch wide (50mm) for
staircase having Granite Treads. The antiskid
clear tape should be minera l coated slip
18091 Metre 126.00
resistant material with pressure sensitive
adhesive including cleaning, degreasing, priming
to mask the surface (if required), presssing using
rubber roller etc. complete.
Proving and laying 120 microns waterproof

plastic film/sheet as per IS 14611-1998 as a
separation/slip membrane laid flat without
18092 sq.m 77.00
creases and with minimum overlap of 200mm at
joints, nailed to underneath Plain Cement
concrete, if required as directed.
Fabrication and fixing of Aluminium composite
panel cladding with thick 3mm/ 0.25mm ACP
18093 sheets, aluminium framework, with 50 X 25 X 1.2 sq.m 3695.00
mm thick sections. Silicon sealants etc. including
accessories complete.
Fabrication and fixing of Aluminium composite
panel cladding with thick 4mm/ 0.25mm ACP
18094 sheets, aluminium framework, with 50 X 25 X 1.2 sq.m 4545.00
mm thick sections. Silicon sealants etc. including
accessories complete.
Providing and Fixing 30mm thick “RAJSHRI”
BRAND FACTORY MADE INTERNAL PVC FLUSH
DOOR SHUTTER - WOOD FREE consisting of
frame made out of M.S. tubes of 19gauge thickness
and size of 20mm x 40mm for stiles as well as top,
bottom & lock rail . M. S. frame shall have a coat of
metal primer of approved make & manufacturer.
The inside panel shall consist of 20mm thick
multichamber hollow PVC section of 1mm wall
thickness, bonded using solvent cement /
cynoacrylate adhesive with 5mm(±0.25) thick
Plain/Prelam PVC sheet of Density 600 Kg/Cbm
manufactured by an ISO-9000 certified company ,
on both side of the inside panel . All the four edge
of the panel to be sealed with lipping of 10mm
18095 sq.m 4308.00
thick & 20 mm wide PVC sheet baton (made by
sticking 2Nos. PVC sheets of 5mm(±0.25)
thickness using PVC solvent cement
adhesive.Door edge lipping to be painted with
PVC ink of matching colour of Plain/Prelam
moulded PVC sheet of door .20 mm thick (5 mm x
4 nos.)thick PVC sheet to be given for lock
provison at lock height . Door to be fixed with
frame with 3 nos. stainless steel butt hinges of size
100mm *25mm *2mm and 50mm long steel
screws drilled suitable to pass through both the
walls of the M.S tube.other hardwares should be
fixed with 25mm*8mm size steel screws etc,
complete as per direction of Engineer-in-charge,
manufacturer’s specification and drawing.

Building GSR - 2023

Uploaded by

Copyright:

Available Formats

Building GSR - 2023

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Building GSR - 2023

Uploaded by

Copyright:

Available Formats

INDEX

I Basic Rates of Material. 001 - 925 200-236

II Mortar 1601 - 1611 199

III Labour 1701 - 1722 197-198

IV Hire charges & Machinery 2001 - 2014 196

V Carriage. 3001 - 3434 189-195

VI Earth Work 4001 - 4033 184-188

VII Masonary work 5001 - 5050 178-183

VIII Plain Concrete work 6001 - 6027 172-177

IX Reinforced Cement concrete. 6030 - 6079 161-171

X Wood work 7001 - 7180 130-160

XI Steel & Aluminium work 8001 - 8061 117-129

XII Flooring 9001 - 9096 100-116

XIII Roofing & Ceiling 10001 - 10113 79-99

XIV Plastering & Finishing 11001 - 11121 69-78

XV Dismantling, Demolishing & Repair Work. 12001 - 12072 62-68

XVI Land Scaping & Horticulture 13001 - 13012 60-61

XVII Water Supply & Sewage. 15601 - 15772 33-59

XVIII Miscellaneous work 18001 - 18095 1-32

Flush door shutters Cellular core construction (1

Designer Series Floor & Wall tiles 600 x 600

Premium quality Floor & Wall tiles 600 x 600

Standard quality Floor & Wall tiles 600 x 600,

237 A.C pipe 100 mm Metre 183.00

272 Double unequal plain invert100x100x75x75 Each 450.00

Basic rate for Material

WATER STORAGE TANKS

Brass ball valve 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm

499 Brass non return valve 65 mm 80 mm

Masterpren BG of BASF make or equivalent

Masterpren TPE of BASF make or equivalent

Sonoshield HLM 5000 of BASF make or

656 a 406.4x 127x254mm with 75,100,150 outlet Each 126.00

White Vetrious Urinal with Sensor Flushing

Stainless steel kitchen sink with drain board.

Stainless steel kitchen sink without drain

Stainless steel kitchen sink without drain

HEALTH FAUCET with 8mm dia 1.2m long

Stainless steel kitchen sink without drain

Stainless steel kitchen sink without drain

GI Metal Tile Clip in Plain Beveled edge global

UPVC 20 Mm Door Shutter Including

Flashings -[Corners, Ridges, valleys, gable end

Fancy wall mixer with 3 IN 1 SYSTEM WITH

FANCY SINK MIXER WITH J SHAPE SWINGING

Fancy TELEPHONIC SHOWER 1.5M FLEXIBLE

Soap Dispenser with Glass Bottle - Jaquar

Solid PVC door frame in prelaminated colour

Solid panel PVC door shutter (Plain) of make

Solid core PVC moulded door in prelaminated

916 Alccofine 1109SR Kg 55.08

917 White Cement based wall putty Kg 18.00

d Alluminium Barge Board of approved make Rmt. 680.00

Alluminium Corner flashing/ Gutter Valley of

932 Waterproofing Liquid of Approved Make Litre 103.00

TRANSPORTATION AND CARRIAGE OF MATERIALS

(A) By tipper truck including

Beyond 5 Beyond 5 Beyond 5

(A) Lime,building rubbish, manure