TDP 5908288 Lad-Saf Vertical Climbing Safety System
TDP 5908288 Lad-Saf Vertical Climbing Safety System
TDP 5908288 Lad-Saf Vertical Climbing Safety System
Technical Data
Description Page
Sheet
6116631 Lad-Saf™ Vertical Climbing Safety System - Standard Rung Mount, Galvanized 3
6116632 Lad-Saf™ Vertical Climbing Safety System - Standard Rung Mount, Stainless Steel 5
6116633 Lad-Saf™ Vertical Climbing Safety System - Standard Rung Mount, Galvanized 7
APPLICATION:
Will fit the following rung types and spacing:
7.7” (196mm)
5/8”-11
1/2”-13
28.2” (716mm)
6.6” (166mm)
4.7” (120mm)
1.3” (32mm)
6.1” (155mm)
16.0” (406mm)
5.5” (140mm)
16.2” (412smm)
1/2”-13
PART SPECIFICATION:
Net Weight Minimum Breaking Strength Maximum Number Single Point Anchor Rating
lb (kg) lb (kN) of Users lb (kN)
23 (10.2) 3,600 (16) 2 3,600 (16)
G
F E
COMPONENT SPECIFICATION:
APPLICATION:
Will fit the following rung types and spacing:
7.7” (196mm)
5/8”-11
1/2”-13
28.2” (716mm)
6.6” (166mm)
4.7” (120mm)
1.3” (32mm)
5.5” (140mm)
16.2” (412smm)
1/2”-13
PART SPECIFICATION:
Net Weight Minimum Breaking Strength Maximum Number Single Point Anchor Rating
lb (kg) lb (kN) of Users lb (kN)
20 (9.1) 3,600 (16) 2 3,600 (16)
G
F E
COMPONENT SPECIFICATION:
APPLICATION:
Will fit the following rung types and spacing:
7.7” (196mm)
5/8”-11
1/2”-13
40.0” (1016mm)
6.6” (166mm)
4.7” (120mm)
1.3” (32mm)
5.5” (140mm )
16.2” (412mm)
1/2”-13
PART SPECIFICATION:
Net Weight Minimum Breaking Strength Maximum Number Single Point Anchor Rating
lb (kg) lb (kN) of Users lb (kN)
27 (12) 4,560 (20.27) 4 3,600 (16)
D
A
B
C
G
E
F
COMPONENT SPECIFICATION:
APPLICATION:
Will fit the following rung types and spacing:
The Climbing Extension will extend 4’ (1.2m) above the top attachment point.
9.38” (238mm )
5/8”-11
1/2”-13
86.5” (2197mm)
6.6” (166mm)
4.7” (120mm)
1.3” (32mm)
5.5” (140mm )
16.2” (412mm)
1/2”-13
PART SPECIFICATION:
Net Weight Minimum Breaking Strength Maximum Number Single Point Anchor Rating
lb (kg) lb (kN) of Users lb (kN)
60 (27.3) 3,600 (16) 2 3,600 (16)
H
A
F
D E
COMPONENT SPECIFICATION:
APPLICATION:
Will fit the following rung types and spacing:
9.6” (244mm)
5/8”-11
79.5” (2019mm)
1/2”-13
48.0” (1219mm)
8.3” (211mm)
6.4” (163mm)
1.3” (32mm)
5.5” (140mm )
16.2” (412mm)
1/2”-13
PART SPECIFICATION:
Net Weight Minimum Breaking Strength Maximum Number Single Point Anchor Rating
lb (kg) lb (kN) of Users lb (kN)
40 (18.2) 4,560 (20.27) 4 3,600 (16)
I
K
F
D E
COMPONENT SPECIFICATION:
APPLICATION:
Will fit a standoff with 4.00” (101mm) center-to-center hole spacing and .025” (6.35mm) wide plate.
6.6” (166mm)
6.6” (166mm)
4.8” (mm)
6.1” (155mm)
16.0” (406mm)
5.4” (137mm)
1.8” (46mm)
PART SPECIFICATION:
E
D
COMPONENT SPECIFICATION:
APPLICATION:
Will attach to wood pole using 0.50” (4 - 12mm) fasteners (not provided).
6.6” (166mm)
1/2”-13
12.2” (310mm)
6.6” (166mm)
4.7” (120mm)
1.3” (32mm)
6.1” (155mm)
16.0” (406mm)
5.5” (140mm )
12.2” (310mm)
1/2”-13
PART SPECIFICATION:
B
F
C
F
E
D
COMPONENT SPECIFICATION:
APPLICATION:
Will fit a standoff with 4.00” (101mm) center-to-center hole spacing and 0.25” (6.35mm) wide plate.
6.6” (166mm)
6.6” (166mm)
4.8” (mm)
5.4” (137mm)
1.8” (46mm)
PART SPECIFICATION:
E
D
COMPONENT SPECIFICATION:
APPLICATION:
For use with 3M approved 3/8” (9.5mm) cable.
10.2” (259mm)
m m)
(38.1
1.5”
PART SPECIFICATION:
COMPONENT SPECIFICATION:
APPLICATION:
For use with 3M approved 3/8” (9.5mm) cable or 5/16” (8mm) cable.
10.2” (259mm)
mm) A
8.1
” (3
1.5
PART SPECIFICATION:
COMPONENT SPECIFICATION:
APPLICATION:
For use with 3M approved 3/8” (9.5mm) cable.
10.2” (259mm)
mm)
8.1
” (3
1.5
PART SPECIFICATION:
COMPONENT SPECIFICATION:
APPLICATION:
For use on attachments up to 1.125” (28.5mm)
Recommended for use with Telescoping and Climbing Extension systems, 6116618 and 6116617.
6.9” (175mm)
1.5” (38mm)
2.6” (67mm)
A
B
COMPONENT SPECIFICATION:
APPLICATION:
For use on attachments up to 1.125” (28.5mm)
Recommended for use with Standard Rung systems, 6116612, 6116613 and 6116614.
6.9” (175mm )
1.5” (38mm)
2.6” (67mm)
A
B
COMPONENT SPECIFICATION:
APPLICATION:
Recommended for use with Monopole systems, 6116615 and 6116619.
1.50” (38mm)
2x Ø 0.44” (11mm) 0.38” (10mm)
0.50” (13mm)
PART SPECIFICATION:
Net Weight
lb (kg)
0.2 (0.1)
COMPONENT SPECIFICATION:
APPLICATION:
For use with stainless steel cable guides on steel pole structures.
Recommended for use with Monopole systems, 6116615 and 6116619, in conjunction with 6100386 Cable Guide Standoff
Support.
5.75” (146mm)
1.50” (38mm)
0.50” (13mm)
1.00” (25mm)
2x Ø 0.44” (11mm)
B
D
PART SPECIFICATION:
Net Weight
lb (kg)
0.2 (0.1)
COMPONENT SPECIFICATION:
APPLICATION:
For use on wood pole structures.
4.00” (102mm)
B
A
PART SPECIFICATION:
Net Weight
lb (kg)
0.6 (0.3)
COMPONENT SPECIFICATION:
APPLICATION:
3/8” 7x19 Galvanized Cable is used as the basis of vertical climbing systems to allow continued attachment.
Cable ordered in 5’ increments up to 100’, 10’ increments up to 200’ and 20’ increments above 200’
Ø.38” (9.5mm)
PART SPECIFICATION:
COMPONENT SPECIFICATION:
APPLICATION:
3/8” 7x19 Stainless Steel Cable is used as the basis of vertical climbing systems to allow continued attachment.
Cable ordered in 5’ increments up to 100’, 10’ increments up to 200’ and 20’ increments above 200’
Ø .38” (9.5mm)
PART SPECIFICATION:
COMPONENT SPECIFICATION:
APPLICATION:
3/8” 1x7 Galvanized Cable is used as the basis of vertical climbing systems to allow continued attachment.
Cable ordered in 5’ increments up to 100’, 10’ increments up to 200’ and 20’ increments above 200’
Ø .38” (9.5mm)
PART SPECIFICATION:
COMPONENT SPECIFICATION:
APPLICATION:
3/8” 1x7 Stainless Steel Cable is used as the basis of vertical climbing systems to allow continued attachment.
Cable ordered in 5’ increments up to 100’, 10’ increments up to 200’ and 20’ increments above 200’
Ø .38” (9.5mm )
PART SPECIFICATION:
COMPONENT SPECIFICATION: