IPDE Hi-Pro ClassB-160degr Certificate
IPDE Hi-Pro ClassB-160degr Certificate
IPDE Hi-Pro ClassB-160degr Certificate
Statement No:
N142CHBU-1
FOR VALVE - BALL
Valid for products not subject to DNV classification requirements.
Particulars of Product
Product Name: Hi-Pro Ball Valve
Type designation: Part No. IPDEAC455
Application/context: Valve
ID/Serial/Tag no: N.A.
for DNV
Except for any liability caused by DNV's gross negligence or wilful misconduct, DNV's maximum cumulative liability arising out of or related to the use of or reliance on
this document shall be limited to USD 300 000.
Form code: 71.07a Revision: 2021-03 www.dnv.com Page 1 of 2
Statement No: N142CHBU-1
Verification extent:
Witness of Fugitive Emission Test
Verification result/comments:
Performance class: ISO FE BH - CO1 - SSA 0 - (t160 °C) - 6,000 psi - ISO 15848-1
See Report Below
Product parameters:
Parameter name Value Unit
Pressure Rating 6,000 psi
Body Material 316SS
Stem Material 316SS
Stem Diameter (ODStem) 10 mm
Date of Test 2022-04-08
Test Fluid Helium
Operating Torque 20 - 24 in.lbf
Gland Bolt Tightening Torque 10 ftlbf
Stroke / Angle 90 (Quarter Turn Valve) Degrees
Report
Valve Qualification Range:
Description Tested Valve Scope
Stem Seal Material Primary: PTFE Primary: PTFE
Stem diameter (ODstem) 10mm 5mm up to 20mm
Stem motion 90 (Quarter Turn Valve) 90 (Quarter Turn Valve)
Body gaskets 316SS 316SS
Pressure Class 6,000 psi 6,000 psi and below
Endurance Class CO1 CO1
Temperature Class t160°C (RT to 160°C) t160°C (RT to 160°C)
Tightness Class BH BH
Performance class: ISO FE BH - CO1 - SSA 0 - (t160 °C) - 6,000 psi - ISO 15848-1