Pni House Ptz1300
Pni House Ptz1300
Pni House Ptz1300
English
» Simultaneous HDMI and VGA video output
» Supports up to one 14TB SATA HDD
» 10 / 100Mbps RJ45 Ethernet port
» H.265 + video compression
» ONVIF compatible
» Supports Cloud and P2P service
» Remote control
» Supports XVI / AHD / TVI / CVI / CVBS / IP signal
» Supports human face identification
» Motion detection
Technical specifications
DVR/NVR
Video compression H.265
Video inputs 4 x BNC
Video output 1 x VGA / 1 x HDMI
Playback resolution 1080P(VGA) / 1080P(HDMI)
Analog: 4 x 5M-N
Registration resolution
IP: 16 x 1080P / 8 x 5MP
and number of channels
Hybrid: 4 x 5M-N + 2 x 1080P
Motion detection Yes
Audio compression G.711A
Recording mode Manual, alarm, motion detection, scheduled
Network interface RJ45 10/100Mgps
PTZ control Yes, it supports
USB 2 x USB 2.0
HDD 1 x SATA (max. 14Tb)
Wireless 3G, Wifi
Power voltage 12V / 2A
Consumption < 15W (without HDD)
Working temperature -26°C ~ +60°C
3 User manual
Dimensions 255 x 218 x 43 mm
Camera
English
Software
The PNI House PTZ1500 system can be controlled locally or remotely from
both smartphones and computers with Windows operating system:
Android iOS
The installation file can be
downloaded from the CD
included in the package or from
Windows General CMS
the Download section on the
product web page (www.mypni.
co.uk)
User manual 4
Connections
3 5 8
English
1 2 4 6 7 9 10
Before first use, please install the storage unit. A single SATA HDD with a
maximum capacity of 14TB can be installed inside the recording unit (the
HDD is not included in the package) .
• Loosen the screws and remove the NVR cover
• Connect the data cables and secure the hard drive to the screws
• Replace the NVR cover
• Connect the power and internet cable to the NVR
5 User manual
Turn the device on
English
Plug the power cord into a 230V outlet. The NVR will start. The indicator LED
will light up. By default, 16 channels will be displayed on the screen.
If the start time is within the preset program for recording, then the recording
function will start automatically.
Notes:
1. Check that the input voltage corresponds to the recommended voltage of the
device. The supply voltage is 230V ± 10% / 50 Hz 2A.
2. We suggest using a UPS device to protect the device from voltage variations.
System authentication
After turning on the device, log in to the system.
By default, the admin user is protected by password 1234. If the password is
entered incorrectly 5 times in a row, the account will be blocked. By restarting
the device or after half an hour, the account will be unlocked automatically .
Note: For the security of your system, please change the password after the first
login.
After starting the device, the quick setup guide will start.
Note: We recommend configuring the system before installing the NVR and
cameras in the final location.
User manual 6
Set the time, date and time zone
English
Network test
The system will start an automatic check of the network parameters. In case
of an error, click on the Network button, check the DHCP option or enter the
parameters manually.
7 User manual
Quick set
English
Channels interface
1. Delete. Delete the camera from the selected channel. Click Apply to run.
2.Clear. Delete the information on the selected channel. Click Apply to run.
3. Encode. Displays the technical parameters of the connected cameras
(resolution, frame rate, video compression, quality, etc.).
4. Edit devices. Change IP and port for the selected channel.
5. Bulk upgrade. Firmware update for selected cameras.
6. Network detect. Cloud network and server testing and diagnostics.
7. Channel title. Rename cameras.
8. NVR Network. Configure NVR network parameters.
9. Close adaptive. Disables the IP adaptation function for the selected cameras.
User manual 8
English
9 User manual
English
Scan the QR code for installing the XMEye mobile application and the code
for adding the system to the application.
Human detect
English
In the main preview interface, right-
click with the mouse to access the
menu.
Main Menu
Options: Record, Alarm, System, Advanced, Info, Logout.
Record
Options: Record config, Playback, Backup.
11 User manual
English
Record Conf.
Playback
The system offers numerous filters and options for identifying the desired
registration file. You can search by channel number, date and time interval or
by file type.
User manual 12
English
Backup
The USB memory or external HDD must be installed in the NVR before
starting the backup. Press the Detect button to identify the storage device,
then the Backup button to perform the backup.
Alarm
Options: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm
Output, Abnormality, Human detect, Face detection.
13 User manual
English
Intelligent Alert
Activate the function, select the channel, the level of sensitivity to motion, the
period and the behavior of the system in case of motion detection: send email,
upload the registration on an FTP server or send notification in the mobile
application.
Activate the function, select the channel, sensitivity level, period and behavior
of the system in case of missing image or missing video signal: send email,
upload the registration on an FTP server or send notification in the mobile
application.
User manual 14
English
Alarm input
15 User manual
Alarm output
English
Abnormality
Set the system behavior in case of: storage device error, lack of space on the
storage device, lack of internet connection or IP conflict. In such situations you
can set the sending of a notification in the application or an email.
Human detect
Activate the function, select the channel, period and behavior of the system in
case of human detection: send email, upload the registration on an FTP server
or send notification in the mobile application.
User manual 16
English
Face detection
Activate the function, select the channel, period and behavior of the system in
case of face detection: send email or send notification in the mobile application.
System
Options: General, Encode, Network, NetService, Display, PTZ Config,
RS232, Tour, Digital, XVI settings.
17 User manual
English
General
Set the time zone, time and date, system display language, and duration of a
work session.
Encode
User manual 18
English
Network
Manually set the network parameters (IP address, gateway, DNS, port, etc.)
or check the DHCP option for automatic parameter retrieval.
Note: For the settings to take effect, restart the system. Right click on the screen
- Logout - Reboot.
NetService
Make various settings, such as: the email address where to receive alerts, or the
FTP server where to send the system records.
19 User manual
English
Display
In the local preview mode can be displayed: time, channel name, recording
status, alarm status, transparency and display resolution. The maximum viewing
resolution supported by this device is 1920 x 1080px.
Note: Before changing the resolution, make sure that your monitor supports that
resolution. If the set resolution is higher than the resolution of your monitor, nothing
will appear on the monitor and you will not be able to access the menu. If this
happens, however, connect the NVR to a lower resolution monitor, access the menu,
and change the resolution.
PTZ Config
The settings can only be applied if you have connected PTZ cameras to the
NVR.
User manual 20
English
Tour
Digital
21 User manual
Digital channels
English
Add a camera on a specific channel. Click the Add button, then Search to find
all the cameras connected in the same network (same router) with the NVR.
Channel status
Channel type
Displays the maximum number of cameras and the resolution of the cameras
that can be connected to the system.
The PNI PTZ1300 system supports :
• Analog cameras: 4 x 5M-N
• IP cameras: 16 x 1080P or 8 x 5MP
User manual 22
• Hybrid: 4 x 5M-N (analog) + 2 x 1080P (IP)
English
XVI Settings
Options: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio
Set
Advanced
Options: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
23 User manual
English
Storage
Select the storage unit, set the operation mode (read / write or read only) or
format the storage unit.
Note: In order to save recordings to the hard disk, it must be set to read / write
mode.
Account
The interface allows managing users who have access to the system, adding
users, changing user rights, changing the password, creating user groups and
setting an account security level by registering answers to certain predefined
questions. In case of password reset, the verification code can be sent in the
mobile application or at the set email address. To increase security, you can set
a pattern for accessing the system.
User manual 24
English
Output adjust
Make settings related to how the camera is displayed on the connected monitor.
AutoMaintain
Set the system to restart on a certain day and time or set the automatic
deletion of files older than a certain period.
25 User manual
English
Restore
Upgrade
Insert a USB stick into the NVR that should contain the update file in the
root folder. Select the storage drive and file from the NVR menu and click the
Upgrade button.
User manual 26
Device info
English
Activate functions such as: buzzer, RS232, PTZ, human chip detection,
maintenance, debugging mode, etc.
Import/Export
Info
Options: HDD info, BPS, LOG, Version.
Get information about the storage drive, operation history and version.
27 User manual
English
Startup wizard
Start the quick setup guide described in detail at the beginning of the manual.
Quick set
Opens the quick camera addition and configuration interface described at the
beginning of the manual in the quick guide.
User manual 28
Record mode
English
Set the recording mode on each channel: programmed, manual, stop recording.
Playback
IPC param
Alarm light
Face detection
The interface is only available for cameras that support this feature.
XVI&AHD
Set the type of camera signal connected: XVI, AHD, TVI sau Auto.
29 User manual
High speed PTZ
English
Alarm output
Settings valid only if you have connected an alarm system to the monitoring
system.
Image settings.
NetDetect
User manual 30
English
3. Net traffic Detect. Monitoring data traffic performed by NVR in the
network.
Logout
31 User manual
Основните функции
Български
Технически спецификации
DVR/NVR
Компресиране на H.265
видео
Видео входове 4 x BNC
Видео изход 1 x VGA / 1 x HDMI
Разделителна 1080P(VGA) / 1080P(HDMI)
способност при
възпроизвеждане
Решение за Аналогов: 4 x 5M-N
регистрация IP: 16 x 1080P / 8 x 5MP
и броя на каналите Хибрид: 4 x 5M-N + 2 x 1080P
Датчик за движение Да
Аудио компресия G.711A
Ръчно, аларма, откриване на движение,
Режим на запис
планирано
Мрежов интерфейс RJ45 10/100Mgps
PTZ контрол Да
USB 2 x USB 2.0
HDD 1 x SATA (макс. 14Tb)
Ръководство 32
Wireless 3G, Wifi
Български
Захранващо 12V / 2A
напрежение
Консумация < 15W (без HDD)
Работна температура -26°C ~ +60°C
Размери 255 x 218 x 43 mm
Камера
Резолюция 2MP 1080P
IR светодиоди 36
IR диапазон До 30 м
Лещи Фиксирани 3,6 мм
Захранващо 12V / 1A
напрежение
Водоустойчив IP66
Размери 63 x 166 x 63 mm
Работна температура 26°C ~ +60°C
Софтуер
Системата PNI House PTZ1500 може да се управлява локално или
дистанционно както от смартфони, така и от компютри с операционна
система Windows:
Операционна
Приложение Download
система
Android iOS
33 Ръководство
Инсталационният файл
Български
Connections
3 5 8
1 2 4 6 7 9 10
Видео
1 Свържете 4 -те камери, включени в пакета
входове
2 Аудио изход Свържете аудио усилвател
3 Видео изход Свържете монитор (композитен видеоклип)
Свържете монитор чрез HDMI кабел (макс.
4 HDMI
1080P)
5 VGA Свържете монитор чрез VGA кабел (макс. 1080P)
Аудио
6 Свържете микрофон към всеки RCA порт
входове
Поставете USB мишка или USB флаш устройство
7 2 x USB
за актуализиране на фърмуера или архивиране
Ethernet Поставете Ethernet кабел, за да свържете NVR
8
порт към рутера
9 RS485 Сериен интерфейс
Източник на
10 Поставете захранващия адаптер 230V - 12V / 2A
захранване
Ръководство 34
Инструкции за употреба
Български
Инсталиране на модула за съхранение
Включете устройството
Включете захранващия кабел в 230V контакт. NVR ще стартира.
Индикаторът ще светне. По подразбиране на екрана ще се показват
16 канала.
Ако началният час е в предварително зададената програма за запис,
тогава функцията за запис ще стартира автоматично.
Бележки:
1. Проверете дали входното напрежение съответства на препоръчаното
напрежение на устройството. Захранващото напрежение е 230V ± 10%
/ 50 Hz 2A.
2. Препоръчваме да използвате UPS устройство за защита на
устройството от колебания на напрежението.
Изключете устройството
Има два начина да изключите устройството.
1. Влезте в главното меню (щракнете с десния бутон върху екрана) и
изберете опцията Изход - Изключване
2. Изключете захранването.
35 Ръководство
Удостоверяване на системата
Български
Тест на мрежата
Ръководство 36
проверете опцията DHCP или въведете параметрите ръчно.
Български
Бърз набор
37 Ръководство
Интерфейс на каналите
Български
Ръководство 38
Български
Инсталирайте мобилно приложение
39 Ръководство
Човешко откриване
Български
Менюто
В основния интерфейс за
визуализация щракнете с десния
бутон на мишката, за да влезете
в менюто.
Главно меню
Настроики: Record, Alarm, System, Advanced, Info, Logout.
Ръководство 40
Български
Запис
Настроики: Record config, Playback, Backup.
Запис на конфигурация
41 Ръководство
Български
Възпроизвеждане
Архивиране
Ръководство 42
Български
Аларма
Настроики: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm
Output, Abnormality, Human detect, Face detection.
Интелигентно предупреждение
43 Ръководство
Български
Ръководство 44
Алармен вход
Български
Функцията е полезна само когато системата за наблюдение е свързана
към алармена система.
Алармен изход
Анормалност
45 Ръководство
Български
Човешко откриване
Разпознаване на лица
Ръководство 46
Български
Система
Настроики: General, Encode, Network, NetService, Display, PTZ Config,
RS232, Tour, Digital, XVI settings.
Общ
47 Ръководство
Български
Кодиране
Мрежа
Ръчно задайте мрежовите параметри (IP адрес, шлюз, DNS, порт и т.н.)
или проверете опцията DHCP за автоматично извличане на параметри.
Забележка: За да влязат в сила настройките, рестартирайте системата.
Щракнете с десния бутон върху екрана - Logout - Reboot.
Ръководство 48
Български
NetService
Дисплей
PTZ конфигурация
Обиколка
Ръководство 50
Български
Digital
Цифрови канали
51 Ръководство
Български
Състояние на канала
Тип канал
Ръководство 52
Български
XVI Настройки
Настроики: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI
Audio Set
Разширено
Настроики: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
53 Ръководство
Български
Съхранение
Сметка
Български
имейл адрес. За да увеличите сигурността, можете да зададете модел
за достъп до системата.
Регулиране на изхода
Автоматична поддръжка
Нулиране
Актуализиране
Ръководство 56
Български
Информация за устройството
Внос износ
57 Ръководство
Български
Информация
Настроики: HDD info, BPS, LOG, Version.
Получете информация за устройството за съхранение, историята на
операциите и версията.
Ръководство 58
Други опции на менюто
Български
Щракнете с десния бутон
върху екрана, за да се покажат
допълнителни опции:
Startup wizard, Quick set, Record
mode, Playback, IPC param., PTZ
control, XVI control, Alarm light,
Face detection, XVI&AHD, High
Speed PTZ, Alarm output, Color
setting, Output adjust, NetDetect,
Logout, Mod afisare (1 camera, 4
camere, 6 camere)
Съветник за стартиране
Бърз набор
Режим на запис
59 Ръководство
Възпроизвеждане
Български
IPC параметри
Алармена светлина
Разпознаване на лица
XVI&AHD
Задайте типа свързан сигнал на камерата: XVI, AHD, TVI sau Auto.
Високоскоростен PTZ
Алармен изход
Български
Настройки на изображението.
NetDetect
61 Ръководство
3. Net traffic Detect. Мониторинг на трафика на данни, извършван от
Български
NVR в мрежата.
Излез от профила си
Ръководство 62
Haupteigenschaften
Deutsche
» Gleichzeitiger HDMI- und VGA-Videoausgang
» Unterstützt bis zu einer 14-TB-SATA-Festplatte
» 10 / 100Mbps RJ45 Ethernet-Port
» H.265 + Videokomprimierung
» ONVIF-kompatibel
» Unterstützt Cloud- und P2P-Dienst
» Fernbedienung
» Unterstützt XVI / AHD / TVI / CVI / CVBS / IP-Signal
» Unterstützt die Gesichtserkennung
» Bewegungserkennung
Technische Spezifikationen
DVR/NVR
Video-Kompression H.265
Videoeingänge 4 x BNC
Video-Ausgang 1 x VGA / 1 x HDMI
Wiedergabeauflösung 1080P(VGA) / 1080P(HDMI)
Analog: 4 x 5M-N
Registrierungsauflösung
IP: 16 x 1080P / 8 x 5 MP
und Anzahl der Kanäle
Hybrid: 4 x 5M-N + 2 x 1080P
Bewegungserkennung Jawohl
Audiokomprimierung G.711A
Aufnahmemodus Manuell, Alarm, Bewegungserkennung, geplant
Netzwerkschnittstelle RJ45 10/100 Mgps
PTZ-Steuerung Jawohl
USB 2 x USB 2.0
HDD 1 x SATA (max. 14Tb)
Wireless 3G, Wifi
Netzspannung 12V / 2A
Verbrauch < 15W (ohne HDD)
Arbeitstemperatur -26°C ~ +60°C
63 Benutzerhandbuch
Maße 255 x 218 x 43 mm
Deutsche
Kamera
Auflösung 2MP 1080P
IR-LEDs 36
IR-Bereich Bis zu 30 m
Linse Fest 3,6 mm
Netzspannung 12V / 1A
Waterproof IP66
Maße 63 x 166 x 63 mm
Arbeitstemperatur 26°C ~ +60°C
Software
Das PNI House PTZ1500-System kann lokal oder aus der Ferne sowohl von
Smartphones als auch von Computern mit Windows-Betriebssystem gesteuert
werden:
Android iOS
Die Installationsdatei kann von
der im Paket enthaltenen CD
oder aus dem Download-Bereich
Windows General CMS
auf der Produkt-Webseite
heruntergeladen werden (www.
mypni.de)
Benutzerhandbuch 64
Anschlüsse
3 5 8
Deutsche
1 2 4 6 7 9 10
Gebrauchsanweisung
Bitte installieren Sie vor dem ersten Gebrauch die Speichereinheit. In der
Aufnahmeeinheit kann eine einzelne SATA-Festplatte mit einer maximalen
Kapazität von 14 TB installiert werden (die Festplatte ist nicht im Lieferumfang
enthalten).
• Lösen Sie die Schrauben und entfernen Sie die NVR-Abdeckung
• Schließen Sie die Datenkabel an und befestigen Sie die Festplatte an den
65 Benutzerhandbuch
Schrauben
• Ersetzen Sie die NVR-Abdeckung
Deutsche
Systemauthentifizierung
Melden Sie sich nach dem Einschalten des Geräts am System an.
Standardmäßig ist der Admin-Benutzer durch das Passwort 1234 geschützt.
Wenn das Passwort 5 Mal hintereinander falsch eingegeben wird, wird das
Konto gesperrt. Durch Neustart des Gerätes oder nach einer halben Stunde
wird das Konto automatisch entsperrt.
Hinweis: Bitte ändern Sie zur Sicherheit Ihres Systems das Passwort nach der ersten
Anmeldung.
Benutzerhandbuch 66
Kurzanleitung zur Einrichtung
Deutsche
Nach dem Starten des Geräts wird die Kurzanleitung zur Einrichtung
gestartet.
Hinweis: Wir empfehlen, das System zu konfigurieren, bevor Sie den NVR und die
Kameras am endgültigen Standort installieren.
Netzwerktest
67 Benutzerhandbuch
Deutsche
Schnelleinstellung
Kameraschnittstelle hinzufügen
1. Wählen Sie das Kommunikationsprotokoll zwischen dem NVR und den
Kameras. Optionen: NETIP, ONVIF, Full Netcom.
2. Search. Drücken Sie die Suchtaste, um nach Kameras zu suchen, die mit
dem gleichen Router (dem gleichen Netzwerk) wie der NVR verbunden sind.
3. Add. Wählen Sie aus der Liste der angezeigten Kameras die gewünschten
Kameras aus und klicken Sie auf Hinzufügen, um sie dem System hinzuzufügen.
4. Network. Konfigurieren Sie Netzwerkparameter für Kameras (IP-Adresse,
Gateway usw.)
5. Quick set. Schnelles Hinzufügen und Konfigurieren von Kameras.
6. IP Bulk Modify. Schneller Wechsel der IP zu mehreren Kameras.
Kanäle-Schnittstelle
1. Delete. Löschen Sie die Kamera aus dem ausgewählten Kanal. Klicken Sie
zum Ausführen auf Übernehmen.
2.Clear. Löschen Sie die Informationen zum ausgewählten Kanal. Klicken Sie
zum Ausführen auf Übernehmen.
3. Encode. Zeigt die technischen Parameter der angeschlossenen Kameras
(Auflösung, Bildrate, Videokompression, Qualität etc.).
4. Edit devices. IP und Port für den ausgewählten Kanal ändern.
5. Bulk upgrade. Firmware-Update für ausgewählte Kameras.
6. Network detect. Cloud-Netzwerk- und Server-Tests und -Diagnose.
7. Channel title. Kameras umbenennen.
Benutzerhandbuch 68
8. NVR Network. Konfigurieren Sie die NVR-Netzwerkparameter.
9. Close adaptive. Deaktiviert die IP-Anpassungsfunktion für die ausgewählten
Deutsche
Kameras.
69 Benutzerhandbuch
Deutsche
Menschenerkennung
Benutzerhandbuch 70
Deutsche
Klicken Sie auf Weiter und OK, um die Kurzanleitung zur Einrichtung zu
verlassen.
Das Menü
Klicken Sie im Hauptvorschaufenster
mit der rechten Maustaste, um auf
das Menü zuzugreifen.
Hauptmenü
Optionen: Record, Alarm, System, Advanced, Info, Logout.
71 Benutzerhandbuch
Deutsche
Aufzeichnen
Optionen: Record config, Playback, Backup.
Aufnahmekonfiguration
Benutzerhandbuch 72
Deutsche
Wiedergabe
Das System bietet zahlreiche Filter und Möglichkeiten zur Identifizierung der
gewünschten Registrierungsdatei. Sie können nach Kanalnummer, Datum und
Zeitintervall oder nach Dateityp suchen.
Sicherung
Der USB-Speicher oder die externe Festplatte muss im NVR installiert sein,
bevor die Sicherung gestartet wird. Drücken Sie die Detect-Taste, um das
Speichergerät zu identifizieren, und dann die Backup-Taste, um die Sicherung
durchzuführen.
73 Benutzerhandbuch
Deutsche
Alarm
Optionen: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm
Output, Abnormality, Human detect, Face detection.
Intelligente Warnung
Aktivieren Sie die Funktion, wählen Sie den Kanal, die Bewegungsempfindlichkeit,
den Zeitraum und das Verhalten des Systems bei Bewegungserkennung: E-Mail
senden, Registrierung auf einen FTP-Server hochladen oder Benachrichtigung
in der mobilen Anwendung senden.
Benutzerhandbuch 74
Deutsche
Kein Bild, kein Videosignal
Aktivieren Sie die Funktion, wählen Sie den Kanal, die Empfindlichkeitsstufe,
den Zeitraum und das Verhalten des Systems bei fehlendem Bild oder
fehlendem Videosignal: E-Mail senden, Registrierung auf einen FTP-Server
hochladen oder Benachrichtigung in der mobilen Anwendung senden.
75 Benutzerhandbuch
Alarmeingang
Deutsche
Alarmausgang
Anomalie
Benutzerhandbuch 76
Deutsche
Menschenerkennung
Aktivieren Sie die Funktion, wählen Sie Kanal, Zeitraum und Verhalten des
Systems im Falle einer Personenerkennung: Senden Sie eine E-Mail, laden
Sie die Registrierung auf einen FTP-Server hoch oder senden Sie eine
Benachrichtigung in der mobilen Anwendung.
Gesichtserkennung
Aktivieren Sie die Funktion, wählen Sie Kanal, Zeitraum und Verhalten des
Systems bei Gesichtserkennung: E-Mail senden oder Benachrichtigung in der
mobilen Anwendung senden.
77 Benutzerhandbuch
Deutsche
System
Optionen: General, Encode, Network, NetService, Display, PTZ Config,
RS232, Tour, Digital, XVI settings.
Allgemein
Benutzerhandbuch 78
Deutsche
Encode
Network
79 Benutzerhandbuch
Deutsche
NetService
Display
Tour
81 Benutzerhandbuch
Digital
Deutsche
Digitale Kanäle
Fügen Sie eine Kamera auf einem bestimmten Kanal hinzu. Klicken Sie auf die
Schaltfläche Hinzufügen und dann auf Suchen, um alle Kameras zu finden, die
im selben Netzwerk (gleicher Router) mit dem NVR verbunden sind.
Kanalstatus
Zeigt den Status (verbunden, nicht verbunden oder nicht konfiguriert) für alle
16 Kanäle an.
Benutzerhandbuch 82
Deutsche
Kanaltyp
Zeigt die maximale Anzahl von Kameras und die Auflösung der Kameras an, die
an das System angeschlossen werden können.
Das PNI PTZ1300-System unterstützt:
• Analoge Kameras: 4 x 5M-N
• IP-Kameras: 16 x 1080P oder 8 x 5MP
• Hybrid: 4 x 5M-N (analog) + 2 x 1080P (IP)
XVI-Einstellungen
Optionen: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio
Set
83 Benutzerhandbuch
Deutsche
Fortschrittlich
Optionen: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
Lagerung
Wählen Sie die Speichereinheit aus, stellen Sie den Betriebsmodus (Lesen /
Schreiben oder nur Lesen) ein oder formatieren Sie die Speichereinheit.
Hinweis: Um Aufnahmen auf der Festplatte zu speichern, muss diese auf den Lese-/
Schreibmodus eingestellt sein.
Benutzerhandbuch 84
Deutsche
Konto
Ausgabe anpassen
Nehmen Sie Einstellungen vor, die sich darauf beziehen, wie die Kamera auf
dem angeschlossenen Monitor angezeigt wird.
85 Benutzerhandbuch
Deutsche
Automatische Wartung
Stellen Sie das System so ein, dass es an einem bestimmten Tag und zu einer
bestimmten Uhrzeit neu startet oder stellen Sie das automatische Löschen von
Dateien ein, die älter als ein bestimmter Zeitraum sind.
Zurücksetzen
Benutzerhandbuch 86
Deutsche
Aktualisierung
Geräteinformationen
87 Benutzerhandbuch
Deutsche
Import Export
Info
Optionen: HDD info, BPS, LOG, Version.
Informieren Sie sich über das Speicherlaufwerk, den Betriebsverlauf und die
Version.
Benutzerhandbuch 88
Deutsche
Andere Menüoptionen
Startassistent
Schnelleinstellung
89 Benutzerhandbuch
Aufnahmemodus
Deutsche
Stellen Sie den Aufnahmemodus für jeden Kanal ein: programmiert, manuell,
Aufnahme stoppen.
Wiedergabe
IPC-Parameter
Alarmleuchte
Gesichtserkennung
Die Schnittstelle ist nur für Kameras verfügbar, die diese Funktion unterstützen.
XVI&AHD
Stellen Sie den Typ des angeschlossenen Kamerasignals ein: XVI, AHD, TVI
oder Auto.
Benutzerhandbuch 90
High speed PTZ
Deutsche
Die Kameras im Kit erlauben diese Funktion nicht.
Alarmausgang
Bildeinstellungen.
NetDetect
91 Benutzerhandbuch
Deutsche
Ausloggen
Melden Sie sich ab, fahren Sie das System herunter oder starten Sie es neu.
Benutzerhandbuch 92
Principales características
Español
» Salida de video HDMI y VGA simultánea
» Admite hasta un disco duro SATA de 14 TB
» Puerto Ethernet RJ45 de 10/100 Mbps
» Compresión de video H.265 +
» Compatible con ONVIF
» Admite servicios en la nube y P2P
» Control remoto
» Admite señales XVI / AHD / TVI / CVI / CVBS / IP
» Admite la identificación de rostros humanos
» Detección de movimiento
Especificaciones técnicas
DVR/NVR
Compresión de video H.265
Entradas de video 4 x BNC
Salida de video 1 x VGA / 1 x HDMI
Resolución de reproducción 1080P(VGA) / 1080P(HDMI)
Analógico: 4 x 5M-N
Resolución de registro
IP: 16 x 1080P / 8 x 5MP
y número de canales
Híbrido: 4 x 5M-N + 2 x 1080P
Detección de movimiento Sí
Compresión de audio G.711A
Manual, alarma, detección de movimiento,
Modo grabación
programado
Interfaz de red RJ45 10 / 100Mgps
Control PTZ Si, es compatible
USB 2 x USB 2.0
HDD 1 x SATA (max. 14Tb)
Wireless 3G, Wifi
Voltaje de potencia 12V / 2A
Consumo < 15W (sinHDD)
93 Manual de usuario
Temperatura de trabajo -26°C ~ +60°C
Dimensiones 255 x 218 x 43 mm
Español
Cámara
Resolución 2MP 1080P
LED de infrarrojos 36
Rango de infrarrojos Hasta 30 m
Lente Fijo 3.6 mm
Voltaje de potencia 12V / 1A
Impermeable IP66
Dimensiones 63 x 166 x 63 mm
Temperatura de trabajo 26°C ~ +60°C
Software
El sistema PNI House PTZ1500 se puede controlar de forma local o remota
desde teléfonos inteligentes y computadoras con sistema operativo Windows:
Android iOS
El archivo de instalación se
puede descargar desde el CD
Windows General CMS incluido en el paquete o desde la
sección Descargar en la página
web del producto. (www.pni.es)
Manual de usuario 94
Conexiones
3 5 8
Español
1 2 4 6 7 9 10
Entradas de
1 Conecte las 4 cámaras incluidas en el paquete
video
Salida de
2 Conecte un amplificador de audio
audio
Salida de
3 Conecte un monitor (video compuesto)
video
Conecte un monitor a través de un cable HDMI (máx.
4 HDMI
1080P)
Conecte un monitor a través de un cable VGA (máx.
5 VGA
1080P)
Entradas de
6 Conecte un micrófono a cada puerto RCA
audio
Inserte un mouse USB o una unidad flash USB para
7 2 x USB
actualizar el firmware o realizar una copia de seguridad
Puerto Inserte un cable Ethernet para conectar el NVR al
8
Ethernet enrutador
9 RS485 Interfaz de serie
Fuente de
10 Inserte el adaptador de corriente 230V - 12V / 2A
alimentación
Instrucciones de uso
Enciende el dispositivo
Enchufe el cable de alimentación en una toma de 230V. Se iniciará el NVR.
El LED indicador se iluminará. De forma predeterminada, se mostrarán 16
canales en la pantalla.
Si la hora de inicio está dentro del programa preestablecido para la grabación,
la función de grabación se iniciará automáticamente.
Notas:
1. Verifique que el voltaje de entrada corresponda al voltaje recomendado del
dispositivo. La tensión de alimentación es 230V ± 10% / 50 Hz 2A.
2. Sugerimos usar un dispositivo UPS para proteger el dispositivo de variaciones de
voltaje.
Apagar el dispositivo
Español
Guía de instalación rápida
Prueba de red
97 Manual de usuario
Español
Fraguado rápido
Interfaz de canales
1. Delete. Elimina la cámara del canal seleccionado. Haga clic en Aplicar para
ejecutar.
2.Clear. Elimina la información del canal seleccionado. Haga clic en Aplicar
para ejecutar.
3. Encode. Muestra los parámetros técnicos de las cámaras conectadas
(resolución, velocidad de cuadros, compresión de video, calidad, etc.).
4. Edit devices. Cambiar IP y puerto para el canal seleccionado.
5. Bulk upgrade. Actualización de firmware para cámaras seleccionadas.
6. Network detect. Pruebas y diagnósticos de servidores y redes en la nube.
7. Channel title. Cambiar el nombre de las cámaras.
Manual de usuario 98
8. NVR Network. Configurar los parámetros de red del NVR.
9. Close adaptive. Desactiva la función de adaptación de IP para las cámaras
Español
seleccionadas.
99 Manual de usuario
Español
Detección humana
El menú
En la interfaz de vista previa principal,
haga clic con el botón derecho del
ratón para acceder al menú.
Menú principal
Opciones: Record, Alarm, System, Advanced, Info, Logout.
Registro
Opciones: Record config, Playback, Backup.
Configuración de registro
Copias de seguridad
La memoria USB o el disco duro externo deben estar instalados en el NVR antes
de iniciar la copia de seguridad. Presione el botón Detectar para identificar el
dispositivo de almacenamiento, luego el botón Copia de seguridad para realizar
la copia de seguridad.
Alarma
Opciones: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm
Output, Abnormality, Human detect, Face detection.
Alerta inteligente
Salida de alarma
Anomalía
Detección de rostro
Sistema
Opciones: General, Encode, Network, NetService, Display, PTZ Config,
RS232, Tour, Digital, XVI settings.
General
Red
NetService
Mostrar
En el modo de vista previa local se puede mostrar: hora, nombre del canal,
estado de grabación, estado de alarma, transparencia y resolución de pantalla.
La resolución de visualización máxima admitida por este dispositivo es 1920 x
1080px.
Nota: antes de cambiar la resolución, asegúrese de que su monitor admita esa
resolución. Si la resolución establecida es superior a la resolución de su monitor,
no aparecerá nada en el monitor y no podrá acceder al menú. Sin embargo, si esto
sucede, conecte el NVR a un monitor de menor resolución, acceda al menú y cambie
la resolución .
Gira
Digital
Canales digitales
Español
Muestra el estado (conectado, desconectado o no configurado) de los 16
canales.
Tipo de canal
XVI Configuración
Opciones: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio
113 Manual de usuario
Set
Español
Avanzado
Opciones: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
Storage
Nota: Para guardar grabaciones en el disco duro, debe estar configurado en modo
Español
Cuenta
Ajuste de salida
Mantenimiento automatico
Reiniciar
Importación y exportación
Info
Opciones: HDD info, BPS, LOG, Version.
Asistente de inicio
Fraguado rápido
Reproducción
Parámetro de IPC
Luz de alarma
Detección de rostro
La interfaz solo está disponible para cámaras que admitan esta función.
XVI y AHD
Configure el tipo de señal de la cámara conectada: XVI, AHD, TVI sau Auto .
Español
Las cámaras del kit no permiten esta función.
Salida de alarma
Configuración de imagen.
NetDetect
3. Net traffic Detect. Monitoreo del tráfico de datos realizado por NVR en la
red.
Cerrar sesión
Français
» Sortie vidéo HDMI et VGA simultanée
» Prend en charge jusqu’à un disque dur SATA de 14 To
» Port Ethernet RJ45 10/100Mbps
» H.265 + compression vidéo
» Compatible ONVIF
» Prend en charge le service Cloud et P2P
» Télécommande
» Prend en charge le signal XVI/AHD/TVI/CVI/CVBS/IP
» Prend en charge l’identification du visage humain
» Détection de mouvement
Spécifications techniques
DVR/NVR
Compression de vidéo H.265
Entrées vidéo 4 x BNC
Sortie vidéo 1 x VGA / 1 x HDMI
Résolution de lecture 1080P(VGA) / 1080P(HDMI)
Analogique : 4 x 5M-N
Résolution d’inscription
IP : 16 x 1080P/8 x 5 MP
et nombre de canaux
Hybride: 4 x 5M-N + 2 x 1080P
Détection de Yes
mouvement
Compression audio G.711A
Manuel, alarme, détection de mouvement,
Mode d'enregistrement
programmé
Interface réseau RJ45 10/100Mgps
Contrôle PTZ Oui, il prend en charge
USB 2 ports USB 2.0
Disque dur 1 x SATA (max. 14 To)
Wifi 3G, Wi-Fi
Tension d'alimentation 12V / 2A
fonctionnement
Dimensions 255 x 218 x 43 mm
Camera
Résolution 2MP 1080P
LED infrarouges 36
Portée infrarouge Jusqu'à 30 mètres
Lentille Fixe 3,6 mm
Tension d'alimentation 12V / 1A
Étanche IP66
Dimensions 63 x 166 x 63 mm
Température de 26°C ~ +60°C
fonctionnement
Software
The PNI House PTZ1500 system can be controlled locally or remotely from
both smartphones and computers with Windows operating system:
Android iOS
Le fichier d’installation peut être
téléchargé à partir du CD inclus
dans l’emballage ou à partir de
Windows General CMS
la section Téléchargement de la
page Web du produit (www.pni.
fr)
Français
1 2 4 6 7 9 10
Mode d’emploi
Allumez l’appareil
Branchez le cordon d’alimentation dans une prise 230V. Le NVR démarrera.
L’indicateur LED s’allumera. Par défaut, 16 canaux seront affichés à l’écran.
Si l’heure de début se situe dans le programme prédéfini pour l’enregistrement,
la fonction d’enregistrement démarrera automatiquement.
Remarques:
1. Vérifiez que la tension d’entrée correspond à la tension recommandée de
l’appareil. La tension d’alimentation est de 230V ± 10% / 50 Hz 2A.
2. Nous suggérons d’utiliser un appareil UPS pour protéger l’appareil des
variations de tension.
Éteignez l’appareil
Il existe deux façons d’éteindre l’appareil.
1. Accédez au menu principal (clic droit sur l’écran) et sélectionnez l’option
Déconnexion - Arrêt
2. Coupez l’alimentation.
Authentification du système
Après avoir allumé l’appareil, connectez-vous au système.
Par défaut, l’utilisateur admin est protégé par le mot de passe 1234. Si le mot de
passe est mal saisi 5 fois de suite, le compte sera bloqué. En redémarrant l’appareil
ou au bout d’une demi-heure, le compte sera déverrouillé automatiquement.
Français
Test de réseau
Détection humaine
Français
Dans l’interface principale de
prévisualisation, faites un clic droit
avec la souris pour accéder au menu.
Menu principal
Options: Record, Alarm, System, Advanced, Info, Logout.
Enregistrement
Options: Record config, Playback, Backup.
Configuration de l’enregistrement
Lecture
La mémoire USB ou le disque dur externe doit être installé dans le NVR avant
de démarrer la sauvegarde. Appuyez sur le bouton Détecter pour identifier
le périphérique de stockage, puis sur le bouton Sauvegarder pour effectuer la
sauvegarde.
Alarme
Options: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm
Output, Abnormality, Human detect, Face detection.
Alerte intelligente
Anomalie
Détection humaine
Français
Détection facial
Système
Options: General, Encode, Network, NetService, Display, PTZ Config,
RS232, Tour, Digital, XVI settings.
Général
Encoder
NetService
Définissez divers paramètres, tels que : l’adresse e-mail où recevoir les alertes
ou le serveur FTP où envoyer les enregistrements système.
Afficher
Configuration PTZ
Les paramètres ne peuvent être appliqués que si vous avez connecté des
caméras PTZ au NVR.
Numérique
Ajouter une caméra sur un canal spécifique. Cliquez sur le bouton Ajouter, puis
sur Rechercher pour trouver toutes les caméras connectées au même réseau
(même routeur) avec le NVR.
État du canal
Affiche l’état (connecté, non connecté ou non configuré) pour les 16 canaux.
Type de canal
Français
Paramètres XVI
Options: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio
Set
Avancée
Options: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
Stockage
Remarque : Afin de sauvegarder les enregistrements sur le disque dur, celui-ci doit
être réglé en mode lecture/écriture.
Compte
Maintenance automatique
Restaurer
Upgrade
Insérez une clé USB dans le NVR qui doit contenir le fichier de mise à jour
dans le dossier racine. Sélectionnez le lecteur de stockage et le fichier dans le
menu NVR et cliquez sur le bouton Mettre à niveau.
Français
Activez des fonctions telles que : buzzer, RS232, PTZ, détection de puce
humaine, maintenance, mode de débogage, etc.
Importer / Exporter
Info
Assistant de démarrage
Réglage rapide
Français
Régler le mode d’enregistrement sur chaque canal : programmé, manuel,
arrêter l’enregistrement .
Relecture
Paramètre IPC
Voyant d’alarme
Détection facial
L’interface n’est disponible que pour les caméras prenant en charge cette
fonctionnalité.
XVI&AHD
Réglez le type de signal de caméra connecté : XVI, AHD, TVI sau Auto.
Sortie d’alarme
Paramètres de l’image.
NetDetect
Français
3. Net traffic Detect. Surveillance du trafic de données effectué par le NVR
dans le réseau.
Se déconnecter
Műszaki adatok
DVR/NVR
Videó tömörítés H.265
Videó bemenetek 4 x BNC
Videó kimenet 1 x VGA / 1 x HDMI
Lejátszási felbontás 1080P(VGA) / 1080P(HDMI)
Analóg: 4 x 5M-N
Regisztrációs megoldás
IP: 16 x 1080P / 8 x 5MP
és a csatornák száma
Hibrid : 4 x 5M-N + 2 x 1080P
Mozgásérzékelés Igen
Audio tömörítés G.711A
Felvételi mód Manuális, riasztás, mozgásérzékelés, ütemezett
Hálózati felület RJ45 10/100Mgps
PTZ vezérlés Igen, támogatja
USB 2 x USB 2.0
HDD 1 x SATA (max. 14 TB)
Vezeték nélküli 3G, Wifi
Tápfeszültség 12V / 2A
Fogyasztás <15W (HDD nélkül)
Üzemhőmérséklet -26°C ~ +60°C
Magyar
Felbontás 2MP 1080P
IR LED -ek 36
IR tartomány Akár 30 m
Lencse Rögzített 3,6 mm
Tápfeszültség 12V / 1A
Vízálló IP66
Méretek 63 x 166 x 63 mm
Üzemhőmérséklet 26°C ~ +60°C
Software
A PNI House PTZ1500 rendszer helyileg vagy távolról vezérelhető
okostelefonokról és Windows operációs rendszerrel rendelkező számítógépekről
egyaránt:
Android iOS
A telepítőfájl letölthető a
csomagban található CD -ről
Windows General CMS vagy a termék weboldalának
Letöltés szakaszából (www.pni.
hu)
1 2 4 6 7 9 10
Videó
1 Csatlakoztassa a csomagban található 4 kamerát
bemenetek
Hang
2 Csatlakoztasson egy audió erősítőt
kimenet
Videó
3 Monitor csatlakoztatása (kompozit videó)
kimenet
Monitor csatlakoztatása HDMI -kábellel (max.
4 HDMI
1080P)
5 VGA Csatlakoztassa a monitort VGA kábellel (max. 1080P)
Audio
6 Csatlakoztasson mikrofont minden RCA porthoz
bemenetek
Helyezzen be egy USB egeret vagy USB flash
7 2 x USB meghajtót a firmware frissítéséhez vagy biztonsági
mentéséhez
Helyezzen be egy Ethernet kábelt az NVR és az
8 Ethernet port
útválasztó csatlakoztatásához
9 RS485 Soros interfész
10 Áramforrás Helyezze be a 230V - 12V / 2A hálózati adaptert
Használati útmutató
A tárolóegység felszerelése
Magyar
• Helyezze vissza az NVR fedelét
• Csatlakoztassa a tápellátást és az internetkábelt az NVR -hez
Kapcsolja be a készüléket
Csatlakoztassa a tápkábelt egy 230 V -os aljzathoz. Az NVR elindul. A
visszajelző LED világítani fog. Alapértelmezés szerint 16 csatorna jelenik meg a
képernyőn.
Ha a kezdési idő a felvétel előre beállított programján belül van, akkor a felvételi
funkció automatikusan elindul.
Megjegyzések:
1. Ellenőrizze, hogy a bemeneti feszültség megfelel -e a készülék ajánlott
feszültségének. A tápfeszültség 230V ± 10% / 50 Hz 2A.
2. Javasoljuk, hogy UPS eszközt használjon, hogy megvédje a készüléket a
feszültségváltozásoktól.
Kapcsolja ki a készüléket
A készülék kikapcsolásának két módja van.
1. Lépjen be a főmenübe (kattintson jobb gombbal a képernyőn), és válassza ki
az opciót Logout - Shutdown
2. Kapcsolja ki az áramellátást.
Rendszer hitelesítés
A készülék bekapcsolása után jelentkezzen be a rendszerbe.
Alapértelmezés szerint az adminisztrátor felhasználót 1234. jelszó védi. Ha a
jelszót ötször egymás után helytelenül adja meg, a fiók letiltásra kerül. Az eszköz
újraindításával vagy fél óra elteltével a fiók automatikusan feloldásra kerül.
Hálózati teszt
Kamerafelület hozzáadása
1. Válassza ki a kommunikációs protokollt az NVR és a kamerák között.
Opciók: NETIP, ONVIF, Full Netcom.
2. Search. Nyomja meg a Keresés gombot az NVR -hez hasonló
útválasztóhoz (azonos hálózathoz) csatlakoztatott kamerák kereséséhez.
3. Add. A megjelenített kamerák listájából válassza ki a kívánt kamerákat,
majd kattintson a Hozzáadás gombra, hogy hozzáadja őket a rendszerhez.
4. Network. A hálózati paraméterek konfigurálása a kamerákhoz (IP -cím,
átjáró stb.)
5. Quick set. A kamerák gyors hozzáadása és konfigurálása.
6. IP Bulk Modify. Gyors IP -váltás több kamerára.
Csatornák interfész
1. Delete. Törölje a kamerát a kiválasztott csatornáról. A futtatáshoz kattintson
az Alkalmaz gombra.
2. Clear. Törölje a kiválasztott csatorna adatait. A futtatáshoz kattintson az
Alkalmaz gombra.
3. Encode. Megjeleníti a csatlakoztatott kamerák műszaki paramétereit
(felbontás, képsebesség, videó tömörítés, minőség stb.).
4. Edit devices. Módosítsa a kiválasztott csatorna IP -címét és portját.
5. Bulk upgrade. Firmware frissítés a kiválasztott kamerákhoz.
6. Network detect. Felhőhálózat és szerver tesztelés és diagnosztika.
7. Channel title. Nevezze át a kamerákat.
8. NVR hánetworklózat. Konfigurálja az NVR hálózati paramétereit.
9. NVR Network. Letiltja az IP -adaptációs funkciót a kiválasztott kameráknál.
157 Használati utasítás
Magyar
Emberi észlelés
Főmenü
Opciók: Record, Alarm, System, Advanced, Info, Logout.
Rögzítése
Opciók: Record config, Playback, Backup.
Felvétel lejátszása
Biztonsági mentés
Riasztás
Opciók: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm Output,
Abnormality, Human detect, Face detection.
Videóvak és videóvesztés
Riasztás bemenet
Magyar
A funkció csak akkor hasznos, ha a felügyeleti rendszer riasztórendszerhez van
csatlakoztatva.
Rendellenesség
Emberi észlelés
Arcfelismerés
Rendszer
Opciók: General, Encode, Network, NetService, Display, PTZ Config, RS232,
Tour, Digital, XVI settings.
Kódol
Hálózat
Állítsa be manuálisan a hálózati paramétereket (IP -cím, átjáró, DNS, port stb.),
Vagy ellenőrizze a DHCP -opciót az automatikus paraméter -lekérdezéshez.
Megjegyzés: A beállítások érvénybe léptetéséhez indítsa újra a rendszert. Jobb klikk
a képernyőn- Logout - Reboot.
NetService
PTZ Konfiguráció
Túra
Digitális
Magyar
Adjon hozzá kamerát egy adott csatornához. Kattintson az Add (Hozzáadás)
gombra, majd a Search (Keresés) gombra, hogy megtalálja az NVR -rel azonos
hálózathoz (ugyanazon útválasztón) csatlakoztatott összes kamerát.
Csatorna állapota
Csatorna típusa
XVI Beállítások
Opciók: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio Set
Fejlett
Opciók: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
Fiók
Kimenet beállítása
Automatikus karbantartás
Frissítés
Import/Export
Információ
Opciók: HDD info, BPS, LOG, Version.
Magyar
Egyéb menüopciók
Indítási varázsló
Gyors beállítás
Lejátszás
IPC param
Riasztó fény
Arcfelismerés
XVI&AHD
Magyar
A készletben lévő kamerák nem teszik lehetővé ezt a funkciót.
Riasztás kimenet
Képbeállítások.
NetDetect
Kijelentkezés
Italiano
» Uscita video simultanea HDMI e VGA
» Supporta fino a un HDD SATA da 14 TB
» Porta Ethernet RJ45 da 10/100 Mbps
» Compressione video H.265 +
» Compatibile ONVIF
» Supporta il servizio Cloud e P2P
» Controllo da remoto
» Supporta il segnale XVI/AHD/TVI/CVI/CVBS/IP
» Supporta l’identificazione del volto umano
» Rilevamento del movimento
Specifiche tecniche
DVR/NVR
Compressione video H.265
Ingresso video 4 x BNC
Uscita video 1 x VGA / 1 x HDMI
Risoluzione di 1080P(VGA) / 1080P(HDMI)
riproduzione
Analogo: 4 x 5M-N
Risoluzione registrazione
IP: 16 x 1080P / 8 x 5MP
e numero di canali
Ibrido: 4 x 5M-N + 2 x 1080P
Rilevamento del Si
movimento
Compressione audio G.711A
Manuale, allarme, rilevamento del movimento,
Modalità di registrazione
programmato
Interfaccia di rete RJ45 10/100Mgps
Controllo PTZ Sì, supporta
USB 2 x USB 2.0
HDD 1 x SATA (max. 14Tb)
WiFi 3G, Wifi
Software
Il sistema PNI House PTZ1500 può essere controllato localmente o in remoto
sia da smartphone che da computer con sistema operativo Windows:
Android iOS
Il file di installazione può essere
scaricato dal CD incluso nella
Windows General CMS confezione o dalla sezione
Download nella pagina web del
prodotto (www.pni.it)
Italiano
1 2 4 6 7 9 10
1 Ingresso video
Collega le 4 telecamere incluse nella confezione
2 Uscita audioCollega un amplificatore audio
3 Uscita videoCollegare un monitor (video composito)
Collega un monitor tramite un cavo HDMI (max.
4 HDMI
1080P)
5 VGA Collega un monitor tramite un cavo VGA (max. 1080P)
6 Ingressi audio Collega un microfono a ciascuna porta RCA
Inserire un mouse USB o un'unità flash USB per
7 2 x USB
l'aggiornamento o il backup del firmware
8 Porta Ethernet Inserire un cavo Ethernet per collegare l'NVR al router
9 RS485 Interfaccia seriale
10 Alimentazione Inserire l'alimentatore 230V - 12V / 2A
Spegnere il dispositivo
Esistono due modi per spegnere il dispositivo.
1. Accedere al menu principale (clic destro sullo schermo) e selezionare l’opzione
Logout - Shutdown
2. Spegnere l’alimentazione.
Nota: per la sicurezza del sistema, modificare la password dopo il primo accesso.
Italiano
Test di rete
Aggiungi telecamere
1. Selezionare il protocollo di comunicazione tra l’NVR e le telecamere.
Opzioni: NETIP, ONVIF, Netcom completo.
2. Search. Premere il tasto Cerca per cercare le telecamere collegate allo
stesso router (stessa rete) dell’NVR.
3. Add. Dall’elenco delle telecamere visualizzate, selezionare le telecamere
desiderate e fare clic su Aggiungi per aggiungerle al sistema.
4. Network. Configurare i parametri di rete per le telecamere (indirizzo IP,
gateway, ecc.)
5. Quick set. Aggiunta e configurazione rapida delle telecamere.
6. IP Bulk Modify. Cambio rapido di IP su più telecamere.
Interfaccia canali
1. Delete. Elimina la telecamera dal canale selezionato. Fare clic su Applica per
eseguire.
2.CancClearella. Elimina le informazioni sul canale selezionato. Fare clic su
Applica per eseguire.
3. Encode. Visualizza i parametri tecnici delle telecamere collegate (risoluzione,
frame rate, compressione video, qualità, ecc.).
4. Edit devices. Cambia IP e porta per il canale selezionato.
5. Bulk upgrade. Aggiornamento del firmware per le telecamere selezionate.
6. Network detect. Test e diagnostica di rete cloud e server.
7. NVR network. Rinomina le telecamere.
8. Close adaptive. Configura i parametri di rete dell’NVR.
9. Close adaptive. Disabilita la funzione di adattamento IP per le telecamere
selezionate.
Rilevamento umano
Italiano
Nell’interfaccia di anteprima
principale, fare clic con il pulsante
destro del mouse per accedere al
menu.
Menu principale
Opzioni: Record, Alarm, System, Advanced, Info, Logout.
Registrazione
Opzioni: Record config, Playback, Backup.
Configurazione registrazioni
Riproduzione
Allarme
Opzioni: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm
Output, Abnormality, Human detect, Face detection.
Allarme intelligente
Anomalia
Rilevamento persone
Sistema
Opzioni: General, Encode, Network, NetService, Display, PTZ Config,
RS232, Tour, Digital, XVI settings.
Generale
Codifica
NetService
Effettua varie impostazioni, come: l’indirizzo email dove ricevere gli avvisi, o il
server FTP dove inviare i record di sistema.
Visione
Configurazione PTZ
Digitale
Aggiungi una telecamera su un canale specifico. Fare clic sul pulsante Aggiungi,
quindi su Cerca per trovare tutte le telecamere collegate alla stessa rete (stesso
router) con l’NVR .
Stato canale
Tipo canale
Italiano
Impostazioni XVI
Opzioni: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio Set
Avanzate
Opzioni: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
Stoccaggio
Nota: per salvare le registrazioni sul disco rigido, è necessario impostare la modalità
di lettura/scrittura.
Conto
Mantenimento automatico
Ripristino
Upgrade
Italiano
Attiva funzioni come: cicalino, RS232, PTZ, rilevamento chip umano,
manutenzione, modalità debug, ecc.
Importa/Esporta
Info
Opzioni: HDD info, BPS, LOG, Version.
Impostazione rapida
Italiano
Imposta la modalità di registrazione su ogni canale: programmato, manuale,
stop registrazione .
Riproduzione
Parametri IPC
Spia di allarme
Riconoscimento viso
XVI&AHD
Impostare il tipo di segnale della telecamera collegata: XVI, AHD, TVI o Auto.
Uscita allarme
Impostazioni immagine.
NetDetect
Italiano
3. Net traffic Detect. Monitoraggio del traffico dati effettuato dall’NVR in
rete.
Disconnettersi
Technische specificaties
DVR/NVR
Video compressie H.265
Video-ingangen 4 x BNC
Video uitgang 1 x VGA / 1 x HDMI
Afspeelresolutie 1080P(VGA) / 1080P(HDMI)
Registratie resolutie: Analoog: 4 x 5M-N
en aantal kanalen
Bewegingsdetectie IP: 16 x 1080P / 8 x 5MP
Audiocompressie Hybride: 4 x 5M-N + 2 x 1080P
Opnamemodus: Ja
Netwerkinterface G.711A
PTZ-bediening Handmatig, alarm, bewegingsdetectie, gepland
USB RJ45 10/100Mgps
HDD Ja, het ondersteunt
Wireless 2x USB 2.0
Voedingsspanning: 1x SATA (max. 14Tb)
Consumptie 3G, wifi
Werktemperatuur 12V / 2A
Dimensies < 15W (zonder HDD)
Gebruikershandleiding 210
Camera
Nederlands
Oplossing 2MP 1080P
IR-LED's 36
IR-bereik Tot 30 m
Lens Vaste 3,6 mm
Voedingsspanning: 12V / 1A
Waterbestendig IP66
Dimensies 63 x 166 x 63 mm
Werktemperatuur 26°C ~ +60°C
Software
Het PNI House PTZ1500-systeem kan lokaal of op afstand worden bediend
vanaf zowel smartphones als computers met Windows-besturingssysteem:
Android iOS
Het installatiebestand kan
worden gedownload vanaf de cd
die is meegeleverd in het pakket
Windows General CMS
of via de downloadsectie op de
productwebpagina (www.mypni.
nl)
211 Gebruikershandleiding
Verbindingen
Nederlands
3 5 8
1 2 4 6 7 9 10
Video-
1 Sluit de 4 camera's aan die in het pakket zitten
ingangen
2 Audio uitgang Sluit een audioversterker aan
3 Video uitgang Een monitor aansluiten (composietvideo)
Sluit een monitor aan via een HDMI-kabel (max.
4 HDMI
1080P)
Sluit een monitor aan via een VGA-kabel (max.
5 VGA
1080P)
Audio-
6 Sluit een microfoon aan op elke RCA-poort
ingangen
Plaats een USB-muis of USB-flashstation voor
7 2 x USB
firmware-update of back-up
Ethernet- Sluit een Ethernet-kabel aan om de NVR op de router
8
poort aan te sluiten
9 RS485 Seriële interface
10 Krachtbron Plaats de 230V - 12V / 2A voedingsadapter
Gebruiksaanwijzing
De opslagruimte installeren
Installeer de opslagruimte voor het eerste gebruik. Een enkele SATA HDD
met een maximale capaciteit van 14TB kan in de opname-eenheid worden
geïnstalleerd (de HDD is niet inbegrepen in het pakket).
• Draai de schroeven los en verwijder het NVR-deksel
• Sluit de datakabels aan en bevestig de harde schijf aan de schroeven
Gebruikershandleiding 212
• Vervang het NVR-deksel
• Sluit de stroom- en internetkabel aan op de NVR
Nederlands
Zet het apparaat aan
Steek de stekker van het netsnoer in een 230V stopcontact. De NVR wordt
gestart. De indicatie-LED gaat branden. Standaard worden 16 kanalen op het
scherm weergegeven.
Als de starttijd binnen het vooraf ingestelde programma voor opname ligt,
start de opnamefunctie automatisch.
Opmerkingen:
1. Controleer of de ingangsspanning overeenkomt met de aanbevolen spanning
van het apparaat. De voedingsspanning is 230V ± 10% / 50 Hz 2A.
2. We raden aan om een UPS-apparaat te gebruiken om het apparaat te
beschermen tegen spanningsschommelingen.
Systeemverificatie
Nadat u het apparaat hebt ingeschakeld, logt u in op het systeem.
Standaard wordt de admin-gebruiker beschermd door wachtwoord 1234. Als
het wachtwoord 5 keer achter elkaar verkeerd wordt ingevoerd, wordt het
account geblokkeerd. Door het apparaat opnieuw op te starten of na een half
uur wordt het account automatisch ontgrendeld.
213 Gebruikershandleiding
Snelle installatiegids
Nederlands
Netwerk test
Gebruikershandleiding 214
Nederlands
Snel instellen
Camera-interface toevoegen
1. Selecteer het communicatieprotocol tussen de NVR en de camera’s. Opties:
NETIP, ONVIF, Volledige Netcom.
2. Search. Druk op de zoektoets om te zoeken naar camera’s die zijn aangesloten
op dezelfde router (hetzelfde netwerk) als de NVR.
3. Add. Selecteer in de lijst met weergegeven camera’s de gewenste camera’s
en klik op Toevoegen om ze aan het systeem toe te voegen.
4. Network. Configureer netwerkparameters voor camera’s (IP-adres, gateway,
enz.)
5. Quick set. Snelle toevoeging en configuratie van camera’s.
6. IP Bulk Modify. Snelle verandering van IP naar meerdere camera’s.
Kanalen interface
1. Delete. Verwijder de camera van het geselecteerde kanaal. Klik op Toepassen
om te starten.
2.Clear. Verwijder de informatie over het geselecteerde kanaal. Klik op
Toepassen om te starten.
3. Encode. Toont de technische parameters van de aangesloten camera’s
(resolutie, framerate, videocompressie, kwaliteit, enz.).
4. Edit devices. Wijzig IP en poort voor het geselecteerde kanaal.
5. Bulk upgrade. Firmware-update voor geselecteerde camera’s.
6. Network detect. Testen en diagnostiek van cloudnetwerken en servers.
7. Channel title. Hernoem camera’s.
215 Gebruikershandleiding
8. NVR Network. Configureer NVR-netwerkparameters.
9. Close adaptive. Schakelt de IP-aanpassingsfunctie uit voor de geselecteerde
Nederlands
camera’s.
Gebruikershandleiding 216
Nederlands
Mobiele app installeren
Menselijk detecteren
217 Gebruikershandleiding
Nederlands
Het menu
Klik in de hoofdvoorbeeldinterface
met de rechtermuisknop om het
menu te openen.
Hoofdmenu
Opties: Record, Alarm, System, Advanced, Info, Logout.
Gebruikershandleiding 218
Nederlands
Opnemen
Opties: Record config, Playback, Backup.
Opnameconfiguratie
219 Gebruikershandleiding
Nederlands
Afspelen
Backup
Gebruikershandleiding 220
Nederlands
Alarm
Opties: Intelligent Alert, Video Blind, Videoverlies, Alarmingang,
Alarmuitgang, Afwijking, Mensdetectie, Gezichtsdetectie.
Intelligente waarschuwing
221 Gebruikershandleiding
Nederlands
Gebruikershandleiding 222
Alarmingang
Nederlands
De functie is alleen nuttig wanneer het bewakingssysteem is aangesloten op
een alarmsysteem.
Alarmuitgang
Afwijking
223 Gebruikershandleiding
Nederlands
Menselijk detecteren
Activeer de functie, selecteer het kanaal, de periode en het gedrag van het
systeem in geval van menselijke detectie: stuur een e-mail, upload de registratie
op een FTP-server of stuur een melding in de mobiele applicatie .
Gezichtsherkenning
Activeer de functie, selecteer het kanaal, de periode en het gedrag van het
systeem in geval van gezichtsherkenning: stuur een e-mail of stuur een melding
in de mobiele applicatie.
Gebruikershandleiding 224
Nederlands
Systeem
Opties: General, Encode, Network, NetService, Display, PTZ Config, RS232,
Tour, Digital, XVI settings.
Algemeen
225 Gebruikershandleiding
Nederlands
Coderen
Netwerk
Gebruikershandleiding 226
Nederlands
NetService
Weergave
227 Gebruikershandleiding
Nederlands
PTZ-configuratie
Tour
Gebruikershandleiding 228
Nederlands
Digitaal
Digitale kanalen
Voeg een camera toe aan een specifiek kanaal. Klik op de knop Toevoegen
en vervolgens op Zoeken om alle camera’s te vinden die op hetzelfde netwerk
(dezelfde router) zijn aangesloten met de NVR .
229 Gebruikershandleiding
Nederlands
Kanaalstatus
Kanaaltype
Toont het maximale aantal camera’s en de resolutie van de camera’s die op het
systeem kunnen worden aangesloten.
Het PNI PTZ1300-systeem ondersteunt:
• Analoge camera’s: 4 x 5M-N
• IP-camera’s: 16 x 1080P of 8 x 5MP
• Hybride: 4 x 5M-N (analoog) + 2 x 1080P (IP)
Gebruikershandleiding 230
Nederlands
XVI Instellingen
Opties: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio Set
Geavanceerd
Opties: Storage, Account, Online User, Output adjust, AutoMaintain,
Restore, Upgrade, Device info, Import/Export.
231 Gebruikershandleiding
Nederlands
Opslag
Rekening
Met de interface kunnen gebruikers die toegang hebben tot het systeem
beheren, gebruikers toevoegen, gebruikersrechten wijzigen, het wachtwoord
wijzigen, gebruikersgroepen maken en een accountbeveiligingsniveau instellen
door antwoorden op bepaalde vooraf gedefinieerde vragen te registreren. In
geval van wachtwoord reset kan de verificatiecode worden verzonden in de
mobiele applicatie of op het ingestelde e-mailadres. Om de beveiliging te
vergroten, kunt u een patroon instellen voor toegang tot het systeem .
Gebruikershandleiding 232
Nederlands
Uitgang aanpassen
Automatisch onderhouden
233 Gebruikershandleiding
Nederlands
Reset
Upgrade
Gebruikershandleiding 234
Apparaat info
Nederlands
Activeer functies zoals: zoemer, RS232, PTZ, menselijke chipdetectie,
onderhoud, foutopsporingsmodus, enz.
Importeren/Exporteren
Info
Opties: HDD info, BPS, LOG, Version.
Andere menu-opties
Opstartwizard
Snel instellen
Gebruikershandleiding 236
Opnamemodus
Nederlands
Stel de opnamemodus in op elk kanaal: geprogrammeerd, handmatig, opname
stoppen.
Afspelen
Opent de afspeelinterface.
IPC-parameter
Alarmlicht
Gezichtsherkenning
XVI&AHD
Stel het type aangesloten camerasignaal in: XVI, AHD, TVI of Auto .
237 Gebruikershandleiding
Hoge snelheid PTZ
Nederlands
Alarmuitgang
Afbeelding instellingen.
NetDetect
Gebruikershandleiding 238
Nederlands
3. Net traffic Detect. Monitoring van dataverkeer uitgevoerd door NVR in
het netwerk.
Uitloggen
239 Gebruikershandleiding
Główne cechy
Polskie
Specyfikacja techniczna
DVR/NVR
Kompresja wideo H.265
Wejścia wideo 4 x BNC
Wyjście wideo 1 x VGA / 1 x HDMI
Rozdzielczość 1080P(VGA) / 1080P(HDMI)
odtwarzania
Rozdzielczość Analog: 4 x 5M-N
rejestracyjna IP: 16 x 1080P / 8 x 5MP
i liczba kanałów Hybrid: 4 x 5M-N + 2 x 1080P
Detekcja ruchu Tak
Kompresja dźwięku G.711A
Tryb nagrywania Ręczny, alarm, detekcja ruchu, zaplanowane
Interfejs sieciowy RJ45 10/100Mgps
Sterowanie PTZ Tak, obsługuje
USB 2 porty USB 2.0
HDD 1 x SATA (maks. 14 TB)
Wireless 3G, Wi-Fi
Napięcie 12V/2A
Konsumpcja < 15W (bez dysku twardego)
Polskie
Kamera
Rezolucja 2MP 1080P
Diody podczerwieni 36
Zasięg podczerwieni Do 30 m²
Obiektyw Naprawiono 3,6 mm
Napięcie 12V / 1A
Wodoodporny IP66
Wymiary 63 x 166 x 63 mm
Temperatura pracy 26°C ~ +60°C
Software
System PNI House PTZ1500 może być sterowany lokalnie lub zdalnie zarówno
ze smartfonów, jak i komputerów z systemem operacyjnym Windows:
Android iOS
The installation file can be
downloaded from the CD
Windows General CMS included in the package or from
the Download section on the
product web page (www.pni.pl)
1 2 4 6 7 9 10
Instrukcja użycia
Polskie
Włącz urządzenie
Podłącz przewód zasilający do gniazdka 230V. NVR zostanie uruchomiony.
Zaświeci się wskaźnik LED. Domyślnie na ekranie będzie wyświetlanych 16
kanałów.
Jeśli czas rozpoczęcia mieści się w zaprogramowanym programie nagrywania,
funkcja nagrywania rozpocznie się automatycznie.
Uwagi:
1. Sprawdź, czy napięcie wejściowe odpowiada zalecanemu napięciu urządzenia.
Napięcie zasilania wynosi 230V ± 10% / 50 Hz 2A.
2. Sugerujemy użycie zasilacza UPS do ochrony urządzenia przed wahaniami
napięcia.
Wyłącz urządzenie
Urządzenie można wyłączyć na dwa sposoby.
1. Wejdź do menu głównego (kliknij prawym przyciskiem myszy na ekranie) i
wybierz opcję Wyloguj - Zamknij
2. Wyłącz zasilanie.
Uwierzytelnianie systemu
Po włączeniu urządzenia zaloguj się do systemu.
Domyślnie administrator jest chroniony hasłem 1234. Jeśli hasło zostanie
wprowadzone niepoprawnie 5 razy z rzędu, konto zostanie zablokowane.
Po ponownym uruchomieniu urządzenia lub po pół godzinie konto zostanie
odblokowane automatycznie.
Test sieci
Interfejs kanałów
1. Delete. Usuń kamerę z wybranego kanału. Kliknij Zastosuj, aby uruchomić.
2.Clear. Usuń informacje o wybranym kanale. Kliknij Zastosuj, aby uruchomić.
3.Encode. Wyświetla parametry techniczne podłączonych kamer (rozdzielczość,
liczba klatek na sekundę, kompresja wideo, jakość itp.).
4. Edit devices. Zmień IP i port dla wybranego kanału.
5. Bulk upgrade. Aktualizacja oprogramowania dla wybranych kamer.
6. Network detect. Testowanie i diagnostyka sieci i serwerów w chmurze.
7. Channel title. Zmień nazwy kamer.
8. NVR Network. Skonfiguruj parametry sieci NVR.
9. Close adaptive. Wyłącza funkcję adaptacji IP dla wybranych kamer.
Wykrywanie człowieka
Menu główne
Opcje: Record, Alarm, System, Advanced, Info, Logout.
Nagrywać
Opcje: Record config, Playback, Backup.
Backup
Pamięć USB lub zewnętrzny dysk twardy musi być zainstalowany w NVR
przed rozpoczęciem tworzenia kopii zapasowej. Naciśnij przycisk Wykryj, aby
zidentyfikować urządzenie pamięci, a następnie przycisk Kopia zapasowa, aby
wykonać kopię zapasową.
Alarm
Opcje: Intelligent Alert, Video Blind, Video Loss, Alarm input, Alarm Output,
Abnormality, Human detect, Face detection.
Wejście alarmowe
Funkcja jest przydatna tylko wtedy, gdy system monitoringu jest podłączony
do systemu alarmowego.
Polskie
Funkcja jest przydatna tylko wtedy, gdy system monitoringu jest podłączony
do systemu alarmowego.
Nieprawidłowość
Wykrywanie człowieka
Wykrywanie twarzy
System
Opcje: General, Encode, Network, NetService, Display, PTZ Config, RS232,
Tour, Digital, XVI settings.
Ustaw strefę czasową, godzinę i datę, język wyświetlania systemu i czas trwania
sesji roboczej.
Kodować
Sieć
Ręcznie ustaw parametry sieciowe (adres IP, brama, DNS, port itp.) lub zaznacz
opcję DHCP w celu automatycznego pobierania parametrów.
Uwaga: aby ustawienia zaczęły obowiązywać, uruchom ponownie system. Kliknij
prawym przyciskiem myszy na ekranie - Logout - Reboot.
NetService
Konfiguracja PTZ
Wycieczka
Cyfrowy
Polskie
Dodaj kamerę na określonym kanale. Kliknij przycisk Dodaj, a następnie
Wyszukaj, aby znaleźć wszystkie kamery podłączone do tej samej sieci (ten sam
router) z NVR .
Stan kanału
Typ kanału
Ustawienia XVI
Opcje: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio Set
Zaawansowany
Opcje: Storage, Account, Online User, Output adjust, AutoMaintain, Restore,
Upgrade, Device info, Import/Export.
Uwaga: Aby zapisać nagrania na dysku twardym, należy go ustawić w trybie odczytu
/ zapisu.
Konto
Regulacja wyjścia
Autokonserwacja
Ustaw system, aby uruchamiał się w określonym dniu i godzinie lub ustaw
automatyczne usuwanie plików starszych niż określony okres.
Upgrade
Włóż pamięć USB do NVR, która powinna zawierać plik aktualizacji w folderze
głównym. Wybierz dysk i plik z menu NVR i kliknij przycisk Aktualizuj.
Aktywuj funkcje takie jak: brzęczyk, RS232, PTZ, wykrywanie ludzkich chipów,
konserwacja, tryb debugowania itp.
Import Eksport
Info
Opcje: HDD info, BPS, LOG, Version.
Kreator uruchamiania
Szybki zestaw
Parametry IPC
Lampka alarmowa
Wykrywanie twarzy
XVI i AHD
Ustaw typ podłączonego sygnału kamery: XVI, AHD, TVI lub Auto .
Polskie
Kamery w zestawie nie pozwalają na tę funkcję.
Wyjście alarmowe
Ustawienia obrazu.
NetDetect
Wyloguj
Wyloguj się, zamknij lub uruchom ponownie system .
Romana
» Iesire video simultana HDMI si VGA
» Suporta maxim 1 HDD SATA de 14TB
» Port Ethernet RJ45 10/100Mbps
» Compresie video H.265+
» Compatibil ONVIF
» Suporta serviciu Cloud si P2P
» Control de la distanta
» Suporta semnal XVI/AHD/TVI/CVI/CVBS/IP
» Suporta identificare chip uman
» Detectie miscare
Specificatii tehnice
DVR/NVR
Compresie video H.265
Intrari video 4 x BNC
Iesiri video 1 x VGA / 1 x HDMI
Rezolutie redare 1080P(VGA) / 1080P(HDMI)
Analogic: 4 x 5M-N
Rezolutie inregistrare
IP: 16 x 1080P / 8 x 5MP
si numar canale
Hibrid: 4 x 5M-N + 2 x 1080P
Detectie miscare Da
Compresie audio G.711A
Mod inregistrare Manual, alarma, detectie miscare, programata
Interfata retea RJ45 10/100Mgps
PTZ control Suporta
USB 2 x USB 2.0
HDD 1 x SATA (maxim 14Tb)
Wireless 3G, Wifi
Alimentare 12V / 2A
Consum < 15W (fara HDD)
Temperatura de lucru -26°C ~ +60°C
Software
Sistemul PNI House PTZ1500 poate fi controlat local sau de la distanta atat de
pe smartphone cat si de pe computere cu sistem de operare Windows:
Android iOS
Fisierul de instalare poate fi
descarcat de pe CD-ul inclus
Windows General CMS in pachet sau din sectiunea
Download de pe pagina web a
produsului (www.pni.ro)
Conexiuni
Manual de utilizare 270
3 5 8
Romana
1 2 4 6 7 9 10
1 Intrari video
Conectati cele 4 camere incluse in pachet
2 Iesire audioConectati un amplificator audio
3 Iesire videoConectati un monitor (video compozit)
Conectati un monitor printr-un cablu HDMI (max.
4 HDMI
1080P)
Conectati un monitor printr-un cablu VGA (max.
5 VGA
1080P)
6 Intrari audio Conectati un microfon in fiecare port RCA
Introduceti un mouse USB sau un stick USB pentru
7 2 x USB
actualizare firmware sau backup
Introduceti un cablu Ethernet pentru a conecta NVR-
8 Port Ethernet
ul la router
9 RS485 Interfata seriala
10 Alimentare Introduceti adaptorul de alimentare 230V - 12V/2A
Instructiuni de utilizare
Oprirea dispozitivului
Sunt doua metode de oprire a dispozitivului.
1. Accesati meniul principal (click dreapta pe ecran) si selectati optiunea Logout
- Shutdown (Inchidere)
2. Opriti sursa de alimentare.
Autentificarea in sistem
Dupa pornirea dispozitivului, autentificati-va in sistem.
Implicit, utilizatorul admin este protejat de parola 1234. Daca parola este
introdusa gresit de 5 ori la rand, contul va fi blocat. Prin repornirea dispozitivului
sau dupa o jumatate de ora, contul va fi deblocat automat.
Nota: Pentru securitatea sistemului Dvs. va rugam sa modificati parola dupa prima
autentificare.
Romana
Test retea
Romana
In interfata principala de previzualizare
faceti click dreapta cu mouse-ul
pentru a accesa meniul.
Record (Inregistrare)
Optiuni: Record config. (Configurare inregistrari), Playback (Redare), Backup
(Copie de siguranta).
Memoria USB sau HDD-ul extern trebuie sa fie instalat in NVR inainte de a
porni executia copiei de rezerva. Apasati butonul Detect pentru identificarea
dispozitivului de stocare, apoi butonul Backup pentru executarea copiei de
rezerva.
Alarm (Alarma)
Optiuni: Intelligent Alert (Alerta inteligenta), Video Blind, Video Loss
(Pierdere semanl video), Alarm input (Intrare alarma), Alarm Output (Iesire
alarma), Abnormality (Situatie anormala), Human detect (Detectare forma
umana), Face detectie (Detectare chip uman).
Functia este utila doar cand sistemul de supraveghere este legat la un sistem
de alarma.
Functia este utila doar cand sistemul de supraveghere este legat la un sistem
de alarma.
System (Sistem)
Optiuni: General, Encode, Network (Retea), NetService, Display (Afisare),
PTZ Config (Configurare PTZ), RS232, Tour, Digital, XVI settings (Setari
XVI).
General
Setati fusul orar, ora si data, limba de afisare a sistemului si durata unei sesiuni
de lucru.
Encode
Setati manual parametrii de retea (adresa IP, gateway, DNS, port etc.) sau
bifati optiunea DHCP pentru preluarea automata a parametrilor.
Nota: Pentru ca setarile sa aiba efect, restartati sistemul. Click dreapta pe ecran -
Logout - Reboot.
NetService
Efectuati diferite setari, precum: adresa de email unde sa primiti alertele, sau
serverul FTP unde sa trimita sistemul inregistrarile.
Display (Afisare)
Setarile pot fi aplicate doar daca ati conectat la NVR camere cu functia PTZ.
Digital
Romana
XVI Settings (setari XVI)
Optiuni: XVI control, Image enhance, XVI upgrade, Sensor cfg, XVI Audio Set
Advanced (Avansate)
Optiuni: Storage (Stocare inregistrari), Account (Cont), Online User
(Utilizatori online), Output adjust (Setari imagine), AutoMaintain (Mentenanta
automata), Restore (Intoarcerea la setarile din fabrica), Upgrade (Actualizare
firmware), Device info (Informatii dispozitiv), Import/Export.
Nota: Pentru a putea salva inregistrarile pe hard disk, acesta trebuie sa fie setat pe
modul citire/scriere.
Account (Cont)
Romana
Activati functii precum: buzzer, RS232, PTZ, detectie chip uman, mentenanta,
mod depanare etc.
Import/Export
Info (Informatii)
Optiuni: HDD info, BPS, LOG, Version.
Startup wizard
Quick set
Romana
Setati modul de inregistrare pe fiecare canal in parte: programat, manual,
stop inregistrare.
Playback (Redare)
Interfata este disponibila doar pentru camerele care suporta aceasta functie..
XVI&AHD
Setati tipul de semnal al camerelor conectate: XVI, AHD, TVI sau Auto.
Setari imagine.
NetDetect
s
2. Remote Net Detect. Monitorizare, diagnosticare si configurare retea si
server Cloud.
Logout
BG:
Опростена декларация за съответствие на ЕС
SC ONLINESHOP SRL декларира, че Система за видеонаблюдение PNI House
PTZ1300 спазва директивата EMC 2014/30/EU. Пълният текст на ЕС декларацията
за съответствие е достъпен на следния интернет адрес:
https://www.mypni.eu/products/8166/download/certifications
DE:
Vereinfachte EU- Konformitätserklärung
SC ONLINESHOP SRL erklärt, dass das Videoüberwachungssystem PNI House
PTZ1300 der Richtlinie EMC 2014/30/EU entspricht. Sie finden den ganzen Text der EU-
Konformitätserklärung an der folgenden Internetadresse:
https://www.mypni.eu/products/8166/download/certifications
ES:
Declaración UE de conformidad simplificada
SC ONLINESHOP SRL declara que el Sistema de videovigilancia PNI House PTZ1300
cumple con la Directiva EMC 2014/30/EU. El texto completo de la declaración de
conformidad de la UE está disponible en la siguiente dirección de Internet:
https://www.mypni.eu/products/8166/download/certifications
FR
Déclaration de conformité simplifiée de l’UE
SC ONLINESHOP SRL déclare que Système de vidéosurveillance PNI House PTZ1300 est
conforme à la directive EMC 2014/30/EU. Le texte complet de la déclaration de conformité
UE est disponible à l’adresse Internet suivante:
https://www.mypni.eu/products/8166/download/certifications
HU:
Egyszerűsített EU Megfelelési Közlemény
SC ONLINESHOP SRL kijelenti azt, hogy a Videomegfigyelő rendszer PNI House
PTZ1300 megfelel az EMC 2014/30/EU irányelvnek. Az EU-megfelelőségi nyilatkozat
teljes szövege a következő internetes címen érhető el:
https://www.mypni.eu/products/8166/download/certifications
IT:
Dichiarazione UE di conformità semplificata
SC ONLINESHOP SRL dichiara che il Sistema di videosorveglianza PNI House PTZ1300 è
conforme alla direttiva EMC 2014/30/UE. Il testo completo della dichiarazione di conformità
europea è disponibile al seguente indirizzo Internet:
https://www.mypni.eu/products/8166/download/certifications
NL:
Vereenvoudigde EU-conformiteitsverklaring
SC ONLINESHOP SRL verklaart dat Videobewakingssysteem PNI House PTZ1300 voldoet
aan de richtlijn EMC 2014/30/EU. De volledige tekst van de EU-conformiteitsverklaring is
beschikbaar op het volgende internetadres:
https://www.mypni.eu/products/8166/download/certifications
PL:
Uproszczona deklaracja zgodności UE
SC ONLINESHOP SRL oświadcza, że System monitoringu wideo PNI House PTZ1300
jest zgodny z dyrektywą EMC 2014/30/EU. Pełny tekst deklaracji zgodności UE dostępny
jest pod następującym adresem internetowym:
https://www.mypni.eu/products/8166/download/certifications
RO:
Declaratie UE de conformitate simplificata
SC ONLINESHOP SRL declara ca Kit supraveghere video AHD PNI House PTZ1300
este in conformitate cu Directiva EMC 2014/30/EU. Textul integral al declaratiei UE de
conformitate este disponibil la urmatoarea adresa de internet:
https://www.mypni.eu/products/8166/download/certifications