TC Uk em 016
TC Uk em 016
TC Uk em 016
INPUT/OUTPUT MODULE
WITH MULTIPLE CAN BUS INTERFACE AND PWM OUTPUTS
CONTROL SYSTEM:
- 2 Freescale Microprocessors, 16bit, clock 40 MHz
- Flash memory 512KB for control program (expandable up to 2 MB)
- RAM 32 KB for control program (expandable a 256 KB)
- EEPROM 8KB for parameters
- RTC (real time clock) with 256KB Flash for Black Box
INTERFACES:
- 3 CAN-BUS interface, standard 2.0B (11 or 29 bit identifier), according to ISO-11898, baud rate up to 1Mbit/s
- 2 LIN BUS master
- 1 RS232
CONNECTORS:
- 1 automotive connector TYCO 120 pin for I/O
- 1 connector DEUTSCH 4 pin for power supply
POWER SUPPLY:
- Main power supply: from +9 to +30 V DC full operational (suitable for battery direct connection)
- Logic power supply (COLD CRANKING): from +4 to +30 V DC
- Separate power supply for each 8 outputs bank
- Internal safety relays controlled by watchdog, used to disconnect outputs in case of hardware or software
malfunctions.
CERTIFICATIONS:
The controller is certified for following automotive standards required by 89/336 CE:
1) EMC standards for emission, immunity for industry (high density industrial environment):
- Reference standard: EN 61000-6-4
- Base standard: EN 55011 (RF Emission)
2) Electromagnetic immunity, low density environment:
- Reference standard : EN 61000-6-2
- Base standard : EN 61000-4-3 (Radio Frequency)
EN 61000-4-4 (Burst)
EN 61000-4-6 (Conducted disturbance)
TC-UK-EM-016-2
I/O CONFIGURATION:
- 8 Input double channel for safety applications:
- On/Off Input (high side)
- Analog Input 0÷30 V, resolution10-bit
- 20 Input software configurable as:
- On/Off Input (high or low side)
- Analog Input range 0÷5V, 10-bit resolution
- Analog Input for resistances reading in range 0÷300Ω, 10-bit resolution
- 12 Input software configurable as :
- On/Off Input (high or low side)
- Analog Input range 0÷5 V, 10-bit resolution
- Analog Input range 0÷20mA, 10-bit resolution
- Analog Input resistances reading in range 0÷300Ω, 10-bit resolution
- 8 Input software configurable as :
- On/Off Input (high side)
- Analog Input 0÷30 V, 10-bit resolution
- 8 Digital Input software configurable as :
- On/Off Input (high side)
- Encoder or RPM Input
- 16 Output (4A max) with status feed-back, software configurable as:
- On/Off Output
- PWM Output
- 16 Output (4A max) with status and current feed-back, software configurable as:
- On/Off Output
- PWM Output
- PWM Output with current feedback
- 8 Output with status feed-back, software configurable as:
-Analog Output 0-5V, 0-10V o Danfoss
MECHANICAL DIMENSIONS :
10 1 10 1 10 1
20 11 20 11 20 11 3 4
30 21 30 21 30 21
40 31 40 31 40 31 2 1
270
260 33
10
5
31.5
4 x Ø6.5
101
191.5
35.5
23.5
77.3