Ax211 Regulatory Webflyer CCG
Ax211 Regulatory Webflyer CCG
Ax211 Regulatory Webflyer CCG
Countries
Marking is
on
Intel® Wi-Fi 6E AX211 (11ax / BT)
the board
label GfP2 AX + BT 2X2 – M.2 2230 GfP2 AX + BT 2X2 – M.2 1216 GfP2 AC + BT 2X2 – M.2 1216 (LTE Coex)
Model: AX211NGW Model: AX211D2W Model: AX211D2WL
Argentina
Marking Marking Marking
No
OEMs must
put CNC on
their system)
(Due to size
constraint,
marking will
be on
packaging and
User Guide)
Belarus
No
(Due to size
constraint,
marking will
be in this Doc)
Botswana No
(Due to size
constraint,
BOCRA/TA/2021/6055 BOCRA/TA/2021/6054 BOCRA/TA/2021/6144
marking will
be in this Doc)
Countries
Marking is
on
Intel® Wi-Fi 6E AX211 (11ax / BT)
the board
label GfP2 AX + BT 2X2 – M.2 2230 GfP2 AX + BT 2X2 – M.2 1216 GfP2 AC + BT 2X2 – M.2 1216 (LTE Coex)
Model: AX211NGW Model: AX211D2W Model: AX211D2WL
Brazil Module Marking: Module Marking: Module Marking:
Anatel: 12069-21-04423 Anatel: 12073-21-04423 Anatel: 14386-21-04423
Cameroon As it is stated in the Approval certificates there is a “vignette” (label) to be purchased by the local representative directly to the Authority
No and affixed in the host equipment. The procedure is called "Application for Technical Visa". The Application form has to be sent to the
General Manager of ART. The number of stickers have to match the quantities of goods to import.
See Note
Canada
Yes IC: 1000M-AX211NG IC: 1000M-AX211D2 IC: 1000M-AX211D2L
(IC ID)
Countries
Marking is
on
Intel® Wi-Fi 6E AX211 (11ax / BT)
the board
label GfP2 AX + BT 2X2 – M.2 2230 GfP2 AX + BT 2X2 – M.2 1216 GfP2 AC + BT 2X2 – M.2 1216 (LTE Coex)
Model: AX211NGW Model: AX211D2W Model: AX211D2WL
Congo DR No Agrée par l'ARPTC Agrée par l'ARPTC Agrée par l'ARPTC
(Due to size
constraint,
marking will N° d'homologation: HER-0102/Juillet/2021 N° d'homologation: HER-0103/Juillet/20211 N° d'homologation: HER-0096/Juillet/2021
be in this Doc) Date d’homologation: 28 July 2021 Date d’homologation: 28 July 2021 Date d’homologation: 28 July 2021
The Regulatory Marking is to be printed in a The Regulatory Marking is to be printed in a label The Regulatory Marking is to be printed in a
label (“vignette”) and affixed on the host (“vignette”) and affixed on the host equipment: label (“vignette”) and affixed on the host
Djibouti Yes equipment: equipment:
AGREE PAR LE MCPT (REPUBLIQUE DE AGREE PAR LE MCPT (REPUBLIQUE DE AGREE PAR LE MCPT (REPUBLIQUE DE
(OEMs must
put ID on their DJIBOUTI) DJIBOUTI) DJIBOUTI)
system)
Europe/
Radio Yes
Equipment
Directive (Due to size
constraint, full
(RED) marking shall
be on the
packaging
label)
No
Ghana
(Due to size
constraint, NCA APPROVED: 7E5-7M-X52-RDR NCA APPROVED: 7E5-BH-X4B-RDR NCA APPROVED: 7E5-7M-XB2-RDR
marking will
be in this Doc)
Countries
Marking is
on
Intel® Wi-Fi 6E AX211 (11ax / BT)
the board
label GfP2 AX + BT 2X2 – M.2 2230 GfP2 AX + BT 2X2 – M.2 1216 GfP2 AC + BT 2X2 – M.2 1216 (LTE Coex)
Model: AX211NGW Model: AX211D2W Model: AX211D2WL
No
India (Due to size
constraint, ETA-SD-20210301679 ETA-SD-20210301678 ETA-SD-20210301823
marking will
be in this Doc)
No
Indonesia
(Due to size
constraint,
marking will
be in this Doc)
See note
5GHz band (W52, W53) and 6GHz (LPI): Indoor use only (Except communicate to W52 high power radio)
Jordan No
(Due to size
constraint,
marking will
be in this Doc)
Malaysia
No Note:
Every importer (ie. OEM) must have a valid SIRIM certificate of the Intel module in the name of their local representative in order to sell
(OEMs must
put ID on their their laptops in the Malaysia market. There is a mandatory labeling requirement for Malaysia. OEMs need to purchase the SIRIM stickers
system) from SIRIM & stick this label on the approved product or at the back of their laptops.
Mauritania
AX211D2WL
No
(Due to size
constraint,
marking will
be in this Doc)
Mexico No
(Due to size
constraint,
marking will
be in this Doc)
Moldova
No
(Due to size
constraint,
marking will
be in this Doc)
Morocco
No
(Due to size
constraint,
marking will
be in this Doc)
Mozambique No
(Due to size
constraint,
marking will
be in this Doc)
Nigeria No
(Due to size
constraint,
marking will
be in this Doc)
Oman See note
Applicant No. Applicant No. Applicant No.
(Due to size D080001 D080001 D080001
constraint,
marking will Approval No. Approval No. Approval No.
be on
packaging)
TRA/TA-R/11342/21 TRA/TA-R/11341/21 TRA/TA-R/11443/21
Pakistan
See note
(Marking will
be on
packaging)
No
(Due to size
constraint,
marking will
be in this Doc)
Sierra
Leone
No
(Due to size
constraint, TAN:2021-002-0042 TAN:2021-002-0041 TAN:2021-002-0044
marking will
be in this Doc)
Singapore
No
(Due to size
constraint,
marking will
be on
packaging) It is the responsibility of the OEMs to indicate at the back of It is the responsibility of the OEMs to indicate at the back of their
It is the responsibility of the OEMs to indicate at the back of
their laptop or finished product with a statement & marking as laptop or finished product with a statement & marking as follow:
their laptop or finished product with a statement & marking as
follow: “This system contains the following wireless module: Intel
follow: “This system contains the following wireless module:
“This system contains the following wireless module: Intel AX211D2W”
Intel AX211D2WL”
AX211NGW”
South
Africa
See note
Note:
The approval labels must be purchased by the customer’s local representative directly from the approval authority ICASA.
South
Korea
Yes
R-C-INT-AX211NGW R-C-INT-AX211D2W R-C-INT-AX211D2WL
See note
1. INTEL CORPORATION 1. INTEL CORPORATION
(Due to size 1. INTEL CORPORATION
constraint, 2. / : ( 2. / : (
marking will 2. / : (
be on (5150-5350MHz, 5470-5850MHz (5150-5350MHz, 5470-5850MHz (5150-5350MHz, 5470-5850MHz
packaging) )) / AX211NGW )) / AX211D2W )) / AX211D2WL
3. 2021/03 3. 2021/03 3. 2021/03
4. INTEL CORPORATION / China, Taiwan 4. INTEL CORPORATION / China, Taiwan 4. INTEL CORPORATION / China, Taiwan
Taiwan Yes
See note
(Due to size
constraint,
marking will
be on
packaging and
User Guide)
No
(Due to size
constraint,
UAE marking will
be on
packaging
OEMs must
put Intel’s
Dealer number
on their
system)
UK
Yes
Ukraine No
(Recommended)
(Due to size
constraint,
marking will
be in this Doc)
Uruguay
Yes
(FCC ID)
USA Yes
See note
(Due to size
constraint, FCC ID: PD9AX211NG FCC ID: PD9AX211D2 FCC ID: PD9AX211D2L
marking will
be on
packaging and
User Guide)
Zambia
No
(Due to size
constraint,
marking will
be in this Doc)
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC
certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper
operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits.
Antenna Use
• To comply with FCC RF exposure limits, it is recommended that for the wireless adapter installed in a host computer, the low gain integrated antennas for
this device should be located at a minimum separation distance from the body of all persons as specified according to the FCC modular grant conditions.
Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the
transmitter has been modified to be qualified for such use.
Warning: The wireless adapter is not designed for use with high-gain directional antennas.
Caution: Regulations of the FCC, FAA and individual airlines prohibit airborne operation of some radio-frequency wireless devices (wireless adapters) because
their signals could interfere with critical aircraft instruments.
Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network.
Local Restrictions on 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax, and 802.16e Radio Usage
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax and 802.16e wireless LAN devices may not yet be
harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be
operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the
countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The
device transmit power control (TPC) interface is part of the Intel® PROSet/Wireless Wi-Fi Connection Utility Software. Operational restrictions for Equivalent
Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use
is an infringement of national law and may be punished as such.
For country-specific information, see the additional compliance information supplied with the product.
Wireless Interoperability
The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology
and to comply with the following standards:
The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less
than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio
frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from
deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the
use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such
situation may include:
If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged
to ask for authorization to use the adapter before you turn it on.
The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel® wireless
adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.
The Intel® wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes
with the product. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the
wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of
interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or
distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.
The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices may not yet be harmonized in all
countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in
countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which
they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the
permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this wireless adapter to be used indoors
for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated
as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device.
This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:
integrating. If any of the requirements herein are not fulfilled then additional testing and FCC/IC Permissive Changes may be required with the specific
host platform and/or antennas for compliance.
Antenna Placement
• To comply with RF exposure requirements the antenna(s) used with the wireless adapter must be installed to provide a minimum separation distance from
all persons in all operating modes and orientations of the host platform as specified by the FCC grant conditions. The antenna separation distance applies
to both horizontal and vertical orientations.
Minimum required antenna-to-user separation
Intel® Wireless Adapter
distance (mm)
Intel® Wi-Fi 6E AX211 (AX211NGW) 14 mm
Intel® Wi-Fi 6E AX211 (AX211D2W) 14 mm
Intel® Wi-Fi 6E AX211 (AX211D2WL) 15 mm
NOTE for desktop solution: To avoid the possibility of exceeding the FCC radio frequency exposure limits, a minimum distance of 20 cm separation between
persons and the external antennas must be maintained. The adapter operates below the FCC limits for radio frequency exposure, but the host system should be
installed and operated in such a manner that the potential for human contact is avoided.
Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device.
Interference Statement
This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio
frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio
communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful
interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference
by taking one or more of the following measures:
• Reorient or relocate the receiving antenna of the equipment experiencing the interference.
Page 19 of 27 October 20, 2022
Intel® Corporation – CCG Intel Client Computing Group – Wireless Test & Certification Center (WTCC)
• Increase the distance between the wireless adapter and the equipment experiencing the interference.
• Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the
product. Any other installation or use will violate FCC Part 15 regulations.
This device is UL Recognized Component for use in UL Listed personal computers or compatible equipment.
Halogen-Free Label
Some adapters are packaged with a Halogen-Free label. This claim applies only to halogenated flame retardants and PVC in components. Halogens are below 900
PPM bromine and 900 PPM chlorine.
Low Halogen: Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased
components on the finished assembly meet JS-709 requirements, and the PCB / substrate meet IEC 61249-2-21 requirements. The replacement of halogenated
flame retardants and/or PVC may not be better for the environment.
Radio Approvals
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the
identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document.
Regulatory Markings
To find the regulatory information for your adapter, click on the link for your adapter. Then click Additional Information > Regulatory Documents.
Regulatory statement
Brazil
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode
causar interferência a sistemas operando em caráter primário.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil se conforme aux normes Canada d'Industrie de RSS permis-exempt. L'utilisation est assujetti aux deux conditions suivantes: (1) cet appareil ne peut
pas causer d'interférences, et (2) cet appareil doit accepter des interférences, y compris des interférences qui peuvent causer desopérations non désirées de
l'appareil.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry
Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel
mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause
interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for
the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas should be located at a
minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of all persons.
Attention: l’utilisation d’un réseau sans fil IEEE802.11a est restreinte à une utilisation en intérieur à cause du fonctionnement dans la bande de fréquence 5.15-
5.25 GHz. Industry Canada requiert que ce produit soit utilisé à l’intérieur des bâtiments pour la bande de fréquence 5.15-5.25 GHz afin de réduire les possibilités
d’interférences nuisibles aux canaux co-existants des systèmes de transmission satellites. Les radars de puissances ont fait l’objet d’une allocation primaire de
fréquences dans les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent créer des interférences avec ce produit et/ou lui être nuisible. Le gain
d’antenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d’être conforme aux limites de puissance isotropique rayonnée équivalente
(P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement point-à-point. Pour se conformer aux conditions d'exposition de RF
toutes les antennes devraient être localisées à une distance minimum de 20 cm, ou la distance de séparation minimum permise par l'approbation du module, du
corps de toutes les personnes.”
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter
by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Page 21 of 27 October 20, 2022
Intel® Corporation – CCG Intel Client Computing Group – Wireless Test & Certification Center (WTCC)
Selon les règlements de Canada d'Industrie, cet émetteur de radio peut seulement fonctionner en utilisant une antenne du type et de gain maximum (ou moindre)
que le gain approuvé pour l'émetteur par Canada d'Industrie. Pour réduire les interférences radio potentielles avec les autres utilisateurs, le type d'antenne et son
gain devraient être choisis de façon à ce que la puissance isotrope rayonnée équivalente (P.I.R.E.) ne soit pas supérieure à celle qui est nécessaire pour une
communication réussie.
China
European Union
The low band 5.15 -5.35 GHz is for indoor use only.
This equipment complies with the essential requirements of the European Union directive 2014/53/EU. See Statements of European Union Compliance.
European Union Declarations of Conformity.
To find the European Union Declaration of Conformity for your adapter, click on the link for your adapter.
http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html
Then select and click on the corresponding adapter: you will find Regulatory Documents in PDF format.
Japan
5.15-5.35 GHz: Indoor use only. (Except communicate to high power radio)
Korea
R-C-INT-AX211NGW
1. : INTEL CORPORATION
2. ( ): ( ) AX211NGW
3. : 2018/11
4. / : INTEL CORPORATION / China
R-C-INT-AX211D2W
1. : INTEL CORPORATION
2. ( ): ( ) AX211D2W
3. : 2018/11
4. / : INTEL CORPORATION / China
R-C-INT-AX211D2WL
1. : INTEL CORPORATION
2. ( ): ( ) AX211D2WL
3. : 2018/11
Morocco
The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima,
Oujda, Tan Tan, Taourirt, Taroudant and Taza.
The operation of this product in the radio channels 4, 5, 6 et 7 (2425 - 2442 MHz) is not authorized in the following cities: Aéroport Mohamed V, Agadir,
Aguelmous, Anza, Benslimane, Béni Hafida, Cabo Negro, Casablanca, Fès, Lakbab, Marrakech, Merchich, Mohammédia, Rabat, Salé, Tanger, Tan Tan,
Taounate, Tit Mellil, Zag.
TAIWAN:
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Nederlands Hierbij verklaart Intel® Corporation dat het toestel Intel® Wi-Fi 6E AX211 in overeenstemming is met de essentiële eisen en de andere relevante
[Dutch] bepalingen van richtlijn 2014/53/EU.
Malti Hawnhekk, Intel® Corporation, jiddikjara li dan Intel® Wi-Fi 6E AX211 jikkonforma mal- ti ijiet essenzjali u ma provvedimenti o rajn
[Maltese] relevanti li hemm fid-Dirrettiva 2014/53/EU.
Magyar Alulírott, Intel® Corporation nyilatkozom, hogy a Intel® Wi-Fi 6E AX211 megfelel a vonatkozó alapvetõ követelményeknek és az 2014/53/EU
[Hungarian] irányelv egyéb elõírásainak.
Norsk Intel® Corporation erklærer herved at utstyret Intel® Wi-Fi 6E AX211 er i samsvar med de grunnleggende krav og øvrige relevante krav i
[Norwegian] direktiv 2014/53/EU.
Polski Niniejszym, Intel® Corporation, o wiadcza, e Intel® Wi-Fi 6E AX211 jest zgodne z zasadniczymi wymaganiami oraz innymi stosownymi
[Polish] postanowieniami Dyrektywy 2014/53/EU.
Português Intel® Corporation declara que este Intel® Wi-Fi 6E AX211 está conforme com os requisitos essenciais e outras disposições da Directiva
[Portuguese] 2014/53/EU.
Romãnã Acest echipament Intel® Wi-Fi 6E AX211 este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 2014/53/EU.
[Romanian]:
Slovensko Šiuo Intel® Corporation izjavlja, da je ta Intel® Wi-Fi 6E AX211 v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo ili direktive
[Slovenian] 2014/53/EU.
Slovensky Intel® Corporation týmto vyhlasuje, že Intel® Wi-Fi 6E AX211 sp a základné požiadavky a všetky príslušné ustanovenia Smernice
[Slovak] 2014/53/EU.
Suomi Intel® Corporation vakuuttaa täten että Intel® Wi-Fi 6E AX211 tyyppinen laite on direktiivin 2014/53/EU oleellisten vaatimusten ja sitä
[Finnish] koskevien direktiivin muiden ehtojen mukainen.
Svenska Härmed intygar Intel® Corporation att denna Intel® Wi-Fi 6E AX211 står i överensstämmelse med de väsentliga egenskapskrav och övriga
[Swedish] relevanta bestämmelser som framgår av direktiv 2014/53/EU.
Íslenska Hér með lýsir Intel® Corporation yfir því að Intel® Wi-Fi 6E AX211 er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun
[Icelandic] 2014/53/EU.
Customer Support
Intel support is available online or by telephone. Available services include the most up-to-date product information, installation instructions about specific
products, and troubleshooting tips.
Online Support
Technical Support: http://www.intel.com/support
Network Product Support: http://www.intel.com/network
Corporate Web Site: http://www.intel.com
© Intel Corporation. All rights reserved. Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 USA