Nothing Special   »   [go: up one dir, main page]

Well Intervention - Annulus Intervention A4

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Annulus Intervention

Safe and efficient repair of


annular integrity issues

Casing integrity issues (Sustained Casing Pressure) is Key applications


a growing concern for operators who are constantly
seeking methods to manage well annulus leaks and • Remove Shut-in casing pressure
new ways of innovating to increase production. Expro’s • Casing integrity issues
Annulus intervention system has been developed • Corrosive fluid displacement
for providing remediation of your well integrity issues • Down hole spotting of resin
without the use of a workover rig. Our system makes • Diagnostics
it economically profitable to regain shut-in and low • Environmental and groundwater protection
production wells. It allows circulation, placement • Preparation for P&A
of sealant in pressurised annuli.

Features and benefits

• Significantly reduced cost, high rewards


• Smaller footprint and lower personnel requirements
• Rapid mobilisation
• Increased oil recovery through
revitalisation of shut-in wells
• Environmental and groundwater protection
• First conventional annulus intervention system
• Reduces the requirement for a workover
rig or heavy equipment
• Possibility to customise to different
annuluses and well types
• Well recovery by restoring well integrity and production
Annulus Intervention - WellSpring System
Main system

Specifications
Operating temperature
Description Footprint (W x D x H) Weight MWP
range
1750 kg
Reeler 1510 x 1300 x 1620 mm 10,000 psi / 690 bar
(inc water filled hose)
Reeler control panel MWP (air) 447 x 447 x 1012 mm 24 kg 90 psi
Stripper & injector table 1380 x 640 x 820 mm 40 kg N/A
Injector (mounted on frame) 890 x 390 x 390 mm 63 kg N/A
Stripper (mounted on frame) Ø88.9 OD x 677 mm long 18.2 kg 5,000 psi / 345 bar
Stripper control panel 405 x 745 x 955 mm 88 kg 90 psi (air)
Injector control panel 447 x 447 x 1012 mm 23 kg 90 psi (air)
Wellspring tool (including front adaptor) 1000-1400 mm length 46-56 kg 2900 psi / 200 bar -29°C to 121°C
Main pumps 1040 x 560 x 720 mm 167 kg 5500 psi / 379 bar
Pump manifold table 828 x 825 x 918 mm 40 kg 10,000 psi / 690 bar
Test pump 340 x 290 x 390 mm 15 kg 10,000 psi / 690 bar

Specifications 11.5 mm OD Wellspring hose 6.9 mm OD Wellspring hose


Outer diameter 11.5 mm 6.9 mm

Inner diameter 6.3 mm 3.4 mm

Collapse pressure 3263 psi / 225 bar 5438 psi / 375 bar

Working pressure 8700 psi / 600 bar 10,000 psi / 690 bar

Temperature rating TBA TBA

Weight 0.175 kg/m 0.072 kg/m

Pressure support 2 layers of high tensile steel wire 2 layers of high tensile steel wire

For further information, please contact:


wellintervention@exprogroup.com
or visit:
www.exprogroup.com/products-services/well-intervention/well-technology/annulus-intervention-services

You might also like