CHAMP® XHP Packer

Completion Tools
CHAMP ® XHP Packer

The CHAMP® XHP packer is a • The concentric bypass valve allows
15K HPHT hookwall-retrievable packer a larger bypass flow area.
with a concentric bypass. As the tool is
• The versatile CHAMP XHP retriev-
lowered into the hole, a J-slot holds the
able packer with it’s concentric
bypass open and controls the setting of
bypass is the tool of choice for
the packer. When the packer is set, a
HPHT testing, TCP or stimulation
balancing piston activated by tubing
applications.
pressure holds the bypass closed.
• The packer is extremely durable
Each tool assembly includes a J-slot and reliable with its high strength
mechanism, mechanical slips, packer construction.
elements, hydraulic slips, and a bypass.
Round, piston-like slips used in the
• Long drag blocks - will not function
casing attachments, ie., MSCs.
hydraulic hold-down mechanism pre-
vent the tool from being pumped up • Tungsten carbide slips - multiple
the hole. The bypass allows the fluids to sets in the hardest casings.
pass around the bottom of the tool
when it is removed from the hole. This
• Ported mandrel circulating valve for
high volume, high velocity circulation.
design eliminates accidentally opening
a conventional bypass during circulation • Compatible with other tools - can be
around the bottom of the packer. run with bridge plugs and drillables.
Circulation around the CHAMP XHP Operation

packer is not interrupted if the packer
The tool is run slightly below the neces-
element temporarily seals unintention-
sary setting position. If the packer is to
ally, as when it passes through points of
be set, it must be picked up, and right-
interference in the casing.
hand rotation must be applied so that a
The CHAMP XHP packer is ideally half-turn can be obtained at the tool. In
suited for horizontal applications due to deep or deviated holes, several turns
its limited rotational requirements and with the rotary may be necessary. For
integrated circulating valve. Just a quar- the position to be maintained, the right-
ter-turn is required, at the tool, to set hand torque must be held until the
the packer and close the circulating mechanical slips on the tool are set and
valve. A straight upward pull opens the can begin taking weight.
bypass and unseats the packer.
Pressure applied below the packer forces
the hydraulic hold-down slips against
Features and Benefits the casing to prevent the packer from
• The packer is used in highly deviated being pumped up the hole.
wells or where pipe manipulation is
difficult. The concentric bypass valve is balanced
to the tubing surface pressure, which
• Picking the packer straight up (no prevents the bypass from being pumped
torque required) opens the bypass. open with tubing pressure. Straight,
HAL15506
• The tool is easily relocated in upward pull on the tubing string opens
multiple zones during a single trip the bypass and unsets the packer.
for treating, testing, or squeezing.
HALLIBURTON
CHAMP® XHP Packer Specifications
7 in. 7 in. and 7-5/8 in. 7-5/8 in.
Part Number 101380053 101429781 101418778
OD (Main body) 5.75 in (146 mm) 6.00 in (152 mm) 6.25 in (159 mm)
Casing 32# Casing 7 in 29# Casing 7-5/8 in 39# Casing
5.85 in (149 mm) 7-5/8 in 52.8# Casing 6.37 in (162 mm)
6.00 in (152 mm)
35# Casing
5.75 in (146 mm) 7-5/8 in 47.1# Casing
(max-element shoes) 6.125 in (156 mm)
7 in 26# Casing
7-5/8 in 51.2# Casing
6.05 in (154 mm)
ID 2.25 in (57 mm) 2.25 in (57 mm) 2.25 in (57 mm)
Make-Up Length 121.90 in (3096 mm) 121.77 in (3093 mm) 121.77 in (3093 mm)
Overall Length 125.77 in (3195 mm) 126.27 in (3207 mm) 126.27 in (3207 mm)
Pressure Rating
(working) 15,000 psi (1034 bar) 15,000 psi (1034 bar) 15,000 psi (1034 bar)
Burst Pressure
(Bull-Plugged) 16,200 psi (1117 bar) 16,200 psi (1117 bar) 16,200 psi (1117 bar)
Burst Pressure
(Open Ended) 16,260 psi (1121 bar) 16,260 psi (1121 bar) 16,260 psi (1121 bar)
Collapse Pressure
(Bull-Plugged) 15,000 psi (1034 bar) 15,000 psi (1034 bar) 15,000 psi (1034 bar)
Collapse Pressure
(Open Ended) 15,050 psi (1038 bar) 15,050 psi (1038 bar) 15,050 psi (1038 bar)
Tensile Rating 163,330 lbs (74085 kg) 163,330 lbs (74085 kg) 163,330 lbs (74085 kg)
Temperature Rating 400˚F (204˚C) 400˚F (204˚C) 400˚F (204˚C)
End Connections 3-7/8 in CAS Special 3-7/8 in CAS Special 3-7/8 in CAS Special
Tool Joint Thread Tool Joint Thread Tool Joint Thread
Service Environment Immersion in various well fluids including hydrocarbons, dilute HCL,
sour gas, salt water, and CO2
For more information on Halliburton’s CHAMP® XHP packer,

contact your Halliburton representative or e-mail
service.tools@halliburton.com.
www.halliburton.com Produced by Halliburton Communications
H03970 10/06 Sales of Halliburton products and services will

© 2006 Halliburton be in accord solely with the terms and conditions
All Rights Reserved contained in the contract between Halliburton and
Printed in U.S.A. the customer that is applicable to the sale.

CHAMP® XHP Packer

Uploaded by

Copyright:

Available Formats

CHAMP® XHP Packer

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CHAMP® XHP Packer

Uploaded by

Copyright:

Available Formats

Completion Tools

CHAMP ® XHP Packer

Circulation around the CHAMP XHP Operation

ID 2.25 in (57 mm) 2.25 in (57 mm) 2.25 in (57 mm)

Temperature Rating 400˚F (204˚C) 400˚F (204˚C) 400˚F (204˚C)

For more information on Halliburton’s CHAMP® XHP packer,

www.halliburton.com Produced by Halliburton Communications

H03970 10/06 Sales of Halliburton products and services will

You might also like