eni spa

ena•

COMPANY STANDARD

APPROVED PAINTING SYSTEMS

Reference to 20000.VAR.PAI.FUN rev 03

27591.VAR.PAI.SDS

Rev. 6- September 2014

~- ~ "":\'rottr'.li, t
6 Revision R.tVcggi F. Zanardo T. Cheldi 22/09/2014
5 Revision R. Poggi F. Zanardo T. Cheldi 15/07/2013
4 Revision R. Poggi F. Zanardo T. Cheldi 16/05/2013
3 Revision TEMM M. Carnago R. Vanzini 01 /06/2008
2 Revision TEMM M. Carnago E. trovato 22/01 /2007
1 Revision TEMM M. Carnago E. trovato 30/10/2006
o Publishing TEMM M. Carnago J. Koko 31 /1 2/2005
REV. DESCRIPTION COMPI LED VERIFIED APPROVED DATE

ENGINEERING COMPANY STANDARD

This document is property of eni spa.

lt shall neither be shown to Third Parties not used for purposes other than those for which it has been seni.
eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 2 of 12

FOREWORD

REV. 0: This document is to be intended as part of company standard 20000.VAR.PAI.FUN

Rev. 3

REV. 1: Revision

REV. 2: Revision

REV. 3: Revision

REV. 4: 11 pages
May 2013
Revision

REV. 5: 11 pages
July 2013
Revision

Qualification as per STANDARD 20000.VAR.PAI.FUN Rev. 3.

New systems from Hempel and Vernital’s systems updating..
A new page for approved coating materials for risers is added.
The present document supersedes the 27591.VAR.PAI.SDS Rev. 4.

REV.6 12 pages
September 2014
Revision

Qualification as per STANDARD 20000.VAR.PAI.FUN Rev. 3.

New systems from International Paint, Carboline, Hempel, and PPG
eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 3 of 12

INDEX

1. GENERAL ......................................................................................................................... 4
1.1 INTRODUCTION............................................................................................................... 4
1.2 SCOPE .............................................................................................................................. 4

PAINT SYSTEMS QUALIFIED ACCORDING TO ENI SPA – FUNCTIONAL SPECIFICATION

20000.VAR.PAI.FUN – REV. 3 ............................................................................................................. 5

SYSTEMS APPROVED FOR RISER’S COATING ............................................................................ 11

APPROVED LABORATORIES FOR COATING TESTING ............................................................... 12

eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 4 of 12

1. GENERAL

1.1 INTRODUCTION
The present document has to be considered as integrant part of the company standard
20000.VAR.PAI.FUN Rev. 3 - “Protective coatings, galvanizing and metalizing for internal and
external surfaces of offshore and onshore structures and related components”.

1.2 SCOPE
This specification defines the products pre-qualified or qualified by the company for the specific use.
For what concern the coating storage & preservation, coating selection, coating qualification, surface
preparation, coating application and inspection, the reference document is 20000.VAR.PAI.FUN Rev.
3.
The qualified products are listed separately and organized for paint system (as per the paint system
data sheet included in doc. 20000.VAR.PAI.FUN Rev. 3) and coating manufacturer.
In addition, the present document includes the laboratories approved by the company for coating
testing, with the reference to the international standard.
The products and laboratories which are not included in the present document are not approved by
Company, however the coating manufacture may apply for pre-qualification or qualification according
to the company standard 20000.VAR.PAI.FUN Rev. 3.
To be highlighted that the applicability of the paint systems listed here following has to be intended
valid as it is for the operative conditions (e.g.: type of fluid, operating temperature, etc.) specified into
the Company Standard 20000.VAR.PAI.FUN R03.
Whether the Operative condition should be different from the specified ones, the applicability of the
paint system shall be verified with the Coating Manufacturer for the new operative condition.
 eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 5 of 12

Paint systems qualified according to eni spa – FUNCTIONAL SPECIFICATION 20000.VAR.PAI.FUN – Rev. 3
PAINT SYSTEM

PPG - Sigma
INTERNATIONAL PAINT HEMPEL CARBOLINE VERNITAL
PAINT SYSTEM REQUIRED BY Coatings/Ameron
NO.

FUNCTIONAL SPEC. 20000

DFT μm

DFT μm

DFT μm

DFT μm

DFT μm
VAR.PAI.FUN. REV 3
PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM

EPOXY PRIMER 50 µm INTERGARD 251 50 VEREPOS BEIGE 50

GLASS FLAKE REINFORCED

001 INTERZONE 505 500 VERMASTIC AVIO GF 500
EPOXY 500 µm

POLYURETHANE TOP COAT 80 µm INTERTHANE 990 80 DESMOVER S 80

EPOXY PHENOLIC 100 µm INTERLINE 399 100 HEMPADUR 85671 100 THERMALINE 400 EU Pr. 100 VEREPOFEN FINISH S 100

002 EPOXY PHENOLIC 100 µm INTERLINE 399 100 HEMPADUR 85671 100 THERMALINE 400 EU Fin 100 VEREPOFEN FINISH S 100

EPOXY PHENOLIC 100 µm INTERLINE 399 100 HEMPADUR 85671 100 THERMALINE 400 EU Fin 100 VEREPOFEN FINISH S 100

EPOXY ANTIABRASION AND

IMPACT RESISTANCE 500 µm
INTERZONE 954 500 Hempadur 35900 500 VERMASTIC AVIO ROSSO 500
003
EPOXY ANTIABRASION AND
IMPACT RESISTANCE 500 µm
INTERZONE 954 500 Hempadur 35900 500 VERMASTIC AVIO ROSSO 500

HEMPADUR PRO ZINC

ORGANIC ZINC PRIMER 60 µm INTERZINC 52 60 60 CARBOZINC 858 60 VEREPOS ZINCO 60
17380

004 EPOXY UNDERCOAT 200 µm INTERGARD 475HS 200 HEMPADUR MASTIC 45880 160 CARBOMASTIC 15LT 200 VERLOCK S 200

POLYURETHANE TOPCOAT 70 µm INTERTHANE 990 70 HEMPATHANE HS 55610 70 CARBOTHANE 134 HP 70 DESMOVER S 70

EPOXY PRIMER 50 µm INTERGARD 251 50 VEREPOS BEIGE 50

005
ANTIABRASION HB EPOXY 400 µm INTERZONE 954 400 VERMASTIC AVIO ROSSO 400
 eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 6 of 12
PAINT SYSTEM

PPG - Sigma
INTERNATIONAL PAINT HEMPEL CARBOLINE VERNITAL
PAINT SYSTEM REQUIRED BY Coatings/Ameron
NO.

FUNCTIONAL SPEC. 20000

DFT μm

DFT μm

DFT μm

DFT μm

DFT μm
VAR.PAI.FUN. REV 3
PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM

Hempadur Multistrength
EPOXY HB 150 µm INTERSEAL 670 HS 150 150 VEREPOS AS S 150
45751
006
Hempadur Multistrength
EPOXY HB 150 µm INTERSEAL 670 HS 150 150 VEREPOS AS S 150
45751

INTERBOND 1202UPC
INORGANIC ZINC 60 µm 100 Galvosil 15700 60 VERZINC 60
Note (4)

INTERBOND 1202UPC
007 SILICONE 30 µm 100 Silicone Aluminium 56914 30 SILVER 600° 30
Note (4)

SILICONE 30 µm Silicone Aluminium 56914 30 SILVER 600° 30

INTERBOND 1202UPC
SILICONE 30 µm 100 Silicone Aluminium 56914 30
Note (4)
008
INTERBOND 1202UPC
SILICONE 30 µm 100 Silicone Aluminium 56914 30
Note (4)

EPOXY PHENOLIC 100 µm INTERTHERM 228 100 HEMPADUR 85671 100 THERMALINE 400 EU Pr. 100 VEREPOFEN FINISH 100
009
EPOXY PHENOLIC 100 µm INTERTHERM 228 100 HEMPADUR 85671 100 THERMALINE 400 EU Fin 100 VEREPOFEN FINISH 100

EPOXY PHENOLIC 100 µm INTERTHERM 228 100 HEMPADUR 85671 100 THERMALINE 400 EU Pr. 100 VEREPOFEN FINISH 100
010
EPOXY PHENOLIC 100 µm INTERTHERM 228 100 HEMPADUR 85671 100 THERMALINE 400 EU Fin 100 VEREPOFEN FINISH 100

SILICONE ALUMINIUM
SILICONE 30 µm INTERTHERM 50 30 30 THERMALINE 4700. 30 SILVER 600° 30
56914
011
SILICONE ALUMINIUM
SILICONE 30 µm INTERTHERM 50 30 30 THERMALINE 4700 30 SILVER 600° 30
56914
 eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 7 of 12
PAINT SYSTEM

PPG - Sigma
INTERNATIONAL PAINT HEMPEL CARBOLINE VERNITAL
PAINT SYSTEM REQUIRED BY Coatings/Ameron
NO.

FUNCTIONAL SPEC. 20000

DFT μm

DFT μm

DFT μm

DFT μm

DFT μm
VAR.PAI.FUN. REV 3
PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM

EPOXY PRIMER 60 µm INTERGARD 251 50 HEMPADUR 15553 60 CARBOGUARD 885 60 VEREPOS BEIGE 60

012 EPOXY UNDERCOAT 150 µm INTERGARD 475 HS 150 HEMPADUR MASTIC 45880 150 CARBOMASTIC 15LT 150 VERLOCK S 150

POLYURETHANE TOPCOAT 70 µm INTERTHANE 990 70 HEMPATHANE HS 55610 70 CARBOTHANE 134 HP 75 DESMOVER 70

ORGANIC ZINC INTERZINC 52 60 Sigmazinc 102 HS 60 CARBOZINC 858 60

Epoxy primer INTERGARD 269 30 __ __ CARBOGUARD 893 SG 30

013.
1
INTUMESCENT EPOXY MASTIC It can It can It can
Note (1) and (2)
CHARTEK 7
vary
Pittchar XP vary
PIROCLAD X-1
vary

Polyurethane topcoat INTERTHANE 990 70 Sigmadur 520 60 CARBOTHANE 134 HP 70

ORGANIC ZINC INTERZINC 52 60

013.
2
Epoxy primer INTERGARD 269 30
N
o
t INTUMESCENT EPOXY MASTIC It can
CHARTEK 1709
e Note (1) and (2) vary
(3)
Polyurethane topcoat INTERTHANE 990 70

EPOXY PRIMER 30 µm INTERGARD 251 50 Sigmacover 522 40 CARBOGUARD 893 SG 30

014. INTUMESCENT EPOXY MASTIC It can It can It can

1 Note (1) and (2)
CHARTEK 7
vary
Pittchar XP vary
PIROCLAD X-1
vary

POLYURETHANE TOP COAT 70 µm INTERTHANE 990 70 Sigmadur 520 60 CARBOTHANE 134 HP 70

 eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 8 of 12
PAINT SYSTEM

PPG - Sigma
INTERNATIONAL PAINT HEMPEL CARBOLINE VERNITAL
PAINT SYSTEM REQUIRED BY Coatings/Ameron
NO.

FUNCTIONAL SPEC. 20000

DFT μm

DFT μm

DFT μm

DFT μm

DFT μm
VAR.PAI.FUN. REV 3
PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM

014. EPOXY PRIMER 30 µm INTERGARD 251 50

2

N INTUMESCENT EPOXY MASTIC It can

CHARTEK 1709
o Note (1) and (2) vary
t
e
(3) POLYURETHANE TOP COAT 70 µm INTERTHANE 990 70

EPOXY ANTIABRASION AND

INTERZONE 954 500 VERMASTIC AVIO ROSSO 500
IMPACT RESISTANT 500 µm
015
EPOXY ANTIABRASION AND
INTERZONE 954 500 VERMASTIC AVIO ROSSO 500
IMPACT RESISTANT 500 µm

HEMPAQUICK PRIMER
ALKYD PRIMER 80 µm INTERPRIME 198 60 80 SIGMAFAST 20 80 OLEOFEN FOSFAZINC 80
13624

HEMPAQUICK PRIMER
016 ALKYD PRIMER 80 µm INTERPRIME 198 60 80 SIGMAFAST 20 80 OLEOFEN FOSFAZINC 80
13624

HEMPAQUICK ENAMEL
ALKYD TOP COAT 80 µm INTERLAC 665 60 80 SIGMAFAST 40 80 VERMAIL 80
53840

HEMPAQUICK PRIMER
ALKYD PRIMER 80 µm INTERPRIME 198 60 80 SIGMAFAST 20 80 OLEOFEN FOSFAZINC 80
13624
017
HEMPAQUICK PRIMER
ALKYD PRIMER 80 µm INTERPRIME 198 60 80 SIGMAFAST 20 80 OLEOFEN FOSFAZINC 80
13624

HEMPADUR QUATTRO
HB EPOXY 160 µm INTERSHIELD 300 160 160 SIGMACOVER 380 16 CARBOMASTIC 18 NT 175
17634
018
HEMPADUR QUATTRO
HB EPOXY 160 µm INTERSHIELD 300 160 160 SIGMACOVER 380 160 CARBOMASTIC 18 NT 175
17634

EPOXY PRIMER 50 µm INTERLINE 982 50 HEMPADUR 15590 50 SIGMACOVER 280 50 CARBOGUARD 940 350 VEREPOS BEIGE 50
019
SIGMAGUARD CSF
FREE SOLVENT EPOXY 300 µm INTERLINE 975 300 HEMPADUR 35560 300 300 VERMASTIC ATOX SS 300
585
 eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 9 of 12
PAINT SYSTEM

PPG - Sigma
INTERNATIONAL PAINT HEMPEL CARBOLINE VERNITAL
PAINT SYSTEM REQUIRED BY Coatings/Ameron
NO.

FUNCTIONAL SPEC. 20000

DFT μm

DFT μm

DFT μm

DFT μm

DFT μm
VAR.PAI.FUN. REV 3
PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM

EPOXY PHENOLIC 100 µm INTERLINE 399 100 HEMPADUR 85671 100 PHENGUARD 930 100 VEREPOFEN FINISH S 100

020 EPOXY PHENOLIC 100 µm INTERLINE 399 100 HEMPADUR 85671 100 PHENGUARD 930 100 PHENOLINE 1205 375 VEREPOFEN FINISH S 100

EPOXY PHENOLIC 100 µm INTERLINE 399 100 HEMPADUR 85671 100 PHENGUARD 940 100 VEREPOFEN FINISH S 100

PURE EPOXY 150 µm INTERLINE 850 125 UNIQ 47741/3 150 SIGMAGUARD 720 150 PHENOLINE 1205 375 VERMASTIC AVIO ROSSO 150
021
PURE EPOXY 150 µm INTERLINE 850 125 UNIQ 47741/3 150 SIGMAGUARD 720 150 VERMASTIC AVIO ROSSO 150

022 INORGANIC ZINC SILICATE 90 µm INTERZINC 2280 75 GALVOSIL 15700 90 SIGMAGUARD 750 75/90 CARBOZINC 11 90 VERZINC 90

SOLVENT FREE EPOXY

023 INTERLINE 984 500 HEMPADUR 35760 400 SIGMA Novoguard 890 400 CARBOGUARD 942 500 VEREPOFEN FINISH 400
PHENOLIC 400 µm

024 HB EPOXY 1500 µm INTERZONE 485 1500 CARBOGUARD 102 1500 VEREPOS SS 1500

THERMAL SPRAY ALUMINIUM 300 µm TSA __ TSA __ TSA __ TSA __ TSA __

025 EPOXY SEALER 60 µm INTERGARD 269 25 HEMPADUR 15570 60 SIGMACOVER 533 60 CARBOGUARD 885 75 VEREPOS BEIGE 60

SIGMASHIELD 825
ANTIABRASION EPOXY 400 µm INTERZONE 954 300 HEMPADUR MS GF 35870 400 400 CARBOGUARD 1209 425 VERMASTIC AVIO ROSSO 400
(AL 400 GFA)

THERMAL SPRAY ALUMINIUM 300 µm TSA __ TSA __ TSA __ TSA __ TSA __

SIGMATHERM 540
026 SILICONE 30 µm INTERTHERM 50 30 SILICONE AL 56914 30 30 THERMALINE 4700 30 SILVER 600° 30
(AM 678 HS)

SIGMATHERM 540
SILICONE 30 µm INTERTHERM 50 30 SILICONE AL 56914 30 30 THERMALINE 4700 30 SILVER 600° 30
(AM 678 HS)
 eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 10 of 12
PAINT SYSTEM

PPG - Sigma
INTERNATIONAL PAINT HEMPEL CARBOLINE VERNITAL
PAINT SYSTEM REQUIRED BY Coatings/Ameron
NO.

FUNCTIONAL SPEC. 20000

DFT μm

DFT μm

DFT μm

DFT μm

DFT μm
VAR.PAI.FUN. REV 3
PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM PAINT SYSTEM

THERMAL SPRAY Zn/Al Alloy 350 µm TSA __ TSA __ TSA __ TSA __ TSA __

027 EPOXY SEALER 60 µm INTERGARD 269 40 HEMPADUR 15570 60 SIGMACOVER 522 60 CARBOGUARD 885 75 VEREPOS BEIGE 60

POLIURETHANE TOP COAT 70 µm INTERTHANE 990 60 HEMPATHANE HS 55610 70 SIGMACOVER 520 70 CARBOTHANE 134 HP 70 DESMOVER S 70
 eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 11 of 12

SYSTEMS APPROVED FOR RISER’S COATING

GEAS TAMBURINI MARINCOAT STOPPANI INTERNATIONAL VERNITAL

PAINT SYSTEM REQUIRED BY
FUNCTIONAL SPEC. 20000 VAR PAI FUN
REV 3
PAINT SYSTEM DFT PAINT SYSTEM DFT PAINT SYSTEM DFT PAINT SYSTEM DFT PAINT SYSTEM DFT

HB SOLVENT FREE POLIURETHANE

MARINPLAST 1200
028 WITH REGULATING DENSITY 20mm __ __ __ STOPJOINT L.D. __ __ __ __ __
MARINBLOCK L.D.
Note (5)
BLACK NEOPRENE BASED
AKORROS C 380
029 ADHESIVE 12 mm __ __ __ __ __ __ __ __ __
Note (6)
POLICLOROPRENE (NEOPRENE)

GLASS FLAKE REINFORCED

030 INTERZONE 1000 1000 VERMASTIC AVIO GF 1000
EPOXY 1000 µm

Note (1) The system shall be pre-qualified and approved by authorities according to the current regulation.
Note (2) The thickness of intumescent product shall be in accordance with regulations requirements and the fire resisting properties required for the area.
Note (3) The Systems 013.2 and 014.2 are suitable for application on structural steel in onshore and jetty installation and tested for Hydrocarbon Pool Fire only.
Therefore cannot be specified for areas where Hydrocarbon Jet Fire is required.
Note (4) The system, built with 2 coats of Titanium modified inorganic copolymer is in alternative to the original systems 007 (Inorganic zinc + silicone + silicone) and 008 (silicone +
silicone)
Note (5) Technical properties as per 20000 VAR PAI FUN
Note (6) The material has been qualified with primer C 003 or in alternative P5
eni spa 27591.VAR.PAI.SDS
Rev. 6 – September 2014
Page 12 of 12

APPROVED LABORATORIES FOR COATING TESTING

Laboratori Location Products Reference Standard

MATED Trento, IT 20000 rev. 03 ISO 20340

ISO 12944
Pont Lab Pontedera, IT 20000 rev. 03 Analytical testing: FTIR, DSC, TGA, TMA,
Ageing, Heating, Immersion
INIG Warszawa, PL 20000 rev. 03 ISO 20340
INSTYTUT NAFTY i GAZU ISO 12944
Oil and Gas Institute

Pourquery France Lyon, F 20000 rev. 03 ISO 20340

ISO 12944
COT Rotterdam, NL 20000 rev. 03 ISO 20340
ISO 12944