FINAL EXAMINATION (Subject Area B) – 30%

Due
Jun 4 at 8pm
Points
150
Questions
150
Available
Jun 4 at 4:30pm - Jun 4 at 8pm
about 4 hours
Time Limit
180 Minutes

Instructions
MULTIPLE CHOICE. Choose the correct answer. 

Attempt History
Attempt Time Score
LATEST Attempt 1
92 minutes 132 out of 150


Correct answers are hidden.

Score for this quiz:

132 out of 150
Submitted Jun 4 at 6:09pm
This attempt took 92 minutes.

Incorrect Question 1 0
/ 1 pts

Classification of lumber having 5” or more on the smallest dimension.

               

 
Strips

 
Planks

 
Board lumber

 
Timber

Question 2 1
/ 1 pts
Group 1 of Philippine timber comprised of:

    i. Aranga, Bansalagin, Ipil, Molave

   ii. Almon, Batete, Lamog, White Lauan

  iii. Guijo, Kalamansanai, Malugai, Narig

  iv. Narra, Supa, Tindalo, Yakal

   v. Amugis, Apitong, Mayapis, Tanguile

 
ii and v

 
i and ii

 
ii and iii

 
i and iv

Question 3 1
/ 1 pts

Most common wood composite which is made of several plies glued together.

 
Gypsum board

 
Chipboard

 
Plywood

 
Hardboard

Question 4 1
/ 1 pts

A small finishing nail.

 
Brad

  
Concrete nail

 
Common nail

 
Cut nail

Question 5 1
/ 1 pts

A type of glass manufactured by pouring molten glass into a surface of molten tin
and allowing it to cool slowly.

 
Plate glass

 
Reflective glass

 
Tempered glass

 
Float glass

Question 6 1
/ 1 pts

The amount of water contained in a wood piece expressed as a percentage of its

weight when oven-dry.

 
Moisture content

 
Liquefaction

 
Surfaced green

 
Fiber-saturation point

 Question 7 1
/ 1 pts

Time required for the removal of side forms for beams.

 
14 days

 
28 days

 
3 days

 
7 days

Question 8 1
/ 1 pts

Concrete proportion for class “B”.

 
1 : 2 : 4

 
1 : 3 : 6

 
1 : 3.5 : 7

 
1 : 2.5 : 5

Incorrect Question 9 0
/ 1 pts

What is the effective dimension of termite sand barrier?

 
3 – 4 mm sand particles

 
6 - 7 mm sand particles

 
4 - 5 mm sand particles

  
1 – 3 mm sand particles

Incorrect Question 10 0
/ 1 pts

The highly decorative type of plaster work developed in Italy during the
Renaissance.

 
Mosaic

 
Sgraffito

 
Bas-relief

 
Fresco

Question 11 1
/ 1 pts

Wooden building frame having studs from sill plate to roof plate.

 
Braced frame

 
Balloon frame

 
Platform frame

 
Combination frame

Question 12 1
/ 1 pts

A framework of rods interwoven with thin branches used in the construction of

walls and fences.
  
Daub

 
Jetty

 
Wattle

 
Nog

Question 13 1
/ 1 pts

The vertical support in timber framing.

 
Post

 
Obelisk

 
Pillar

 
Column

Question 14 1
/ 1 pts

Hand convention for door opening inwards to the right.

 
Right hand (RH)

 
Left hand (LH)

 
Left hand reverse (LHR)

 
Right hand reverse (RHR)

Question 15 1
/ 1 pts

A stile within the frame of a door.

 
Muntin

 
Transom

 
Meeting stile

 
Rail

Question 16 1
/ 1 pts

The lowest horizontal member resting on and anchored to a foundation wall. 

 
Sill

 
Plate

 
Cripple

 
Stud

Question 17 1
/ 1 pts

The frames between the hip and the valley rafters.

 
Hip jack

 
Valley jack

 
Hip rafter

  
Cripple jack

Incorrect
Question 18 0
/ 1 pts

The following are the types of splicing tension members except:

 
Wooden tabled fish plate splice

 
Timber connector splice

 
Bolted wooden fish plate splice

 
Welded steel fish plate splice

Question 19 1
/ 1 pts

A supporting joist which carries an end portion of a header.

 
Trimmer

 
Balustrade

 
Header

 
Rail

Question 20 1
/ 1 pts

A flush, overlapping joint between two boards joined edge to edge.

 
Dado

  
Bolection

 
Wainscot

 
Shiplap

Question 21 1
/ 1 pts

The process by which two metals are joined that there is an actual union of the
interatomic bonds.

 
Bolting

 
Brazing

 
Riveting

 
Welding

Question 22 1
/ 1 pts

The natural material on which the construction rests.

 
Foundation bed

 
Foundation wall

 
Foundation piers

 
Grade beam

Question 23 1
/ 1 pts
A system of supports that enables an existing foundation to be rebuilt, strengthen
or deepened.

 
Raking

 
Shoring

 
Underpinning

 
Retainin

Question 24 1
/ 1 pts

Beam supporting the weight above a door or window opening.

 
Template

 
Discharging arch

 
Lintel

 
Pier

Question 25 1
/ 1 pts

A slender column subject to failure by buckling rather than by crushing.

 
Thick column

 
Short column

 
Slender column

 
Long column

 Question 26 1
/ 1 pts

A structural frame based on the geometric rigidity of the triangle and composed of
linear members subject only to axial tension or compression.

 
Track

 
Truss

 
Stud

 
Spandrel

Question 27 1
/ 1 pts

These are fabricated steel pipes provided with flat steel plates which hold a girder
or girt, and filled with grout or concrete to prevent corrosion.

 
Combined columns

 
Spiral column

 
Lallycolumns

 
Composite columns

Incorrect Question 28 0
/ 1 pts

What is the maximum spacing of lateral ties for a 300 mm. x 280 mm. column with
16 mm Ø main bars and 10mm Ø lateral ties?

 
256 mm.

  
300 mm.

 
280 mm.

 
480 mm.

Question 29 1
/ 1 pts

Which of the following is/are considered as long column/s?

      i. 300 mm. x 250 mm. x 3000 mm.

     ii. 400 mm. x 350 mm. x 3400 mm.

    iii. 350 mm. x 320 mm. x 3000 mm.

    iv. 380 mm. x 350 mm. x 3200 mm.

     v. 340 mm. x 270 mm. x 2800 mm.

 
i and v

 
ii and iv

 
ii, iii, and v

 
ii and iii

Question 30 1
/ 1 pts

A vertical diaphragm acting as a thin, deep cantilever beam to transfer lateral load
to foundation.

 
Curtain wall

 
Foundation wall

  
Shear wall

 
Retaining wall

Question 31 1
/ 1 pts

If 12.5 pieces of 4”x8”x16” CHB can accommodate 1.00 m² wall, how many pieces
of 6”x8”x16” CHB are required for a 1.00 m² wall?

 
12.5 pieces

 
18.75 pieces

 
6 pieces

 
4 pieces

Question 32 1
/ 1 pts

Cast-in-place concrete belongs to what division?

 
Division 3

 
Division 2

 
Division 8

 
Division 10

Question 33 1
/ 1 pts
 Using 6.00 m. long 12 mm. diameter steel bar to form a giant ring, what is the
centroidal circumference of the circle?

 
76 m.

 
5 m.

 
9 m.

 
6 m.

Question 34 1
/ 1 pts

Concrete masonry units belong to what division?

 
Division 8

 
Division 7

 
Division 9

 
Division 4

Incorrect Question 35 0
/ 1 pts

Part of specification that describes, in detail, preparatory actions and how the
products are incorporated into the project.

 
Execution

 
General

 
Services

  
Specific

Incorrect Question 36 0
/ 1 pts

How many pieces of 6”x8”x16” concrete hollow blocks can be used for a
trapezoidal wall with 4.00 meters length and 3.20 meters height at the lower side
and inclined to the other side by 20 degrees?

 
1,572 pieces

 
197 pieces

 
160 pieces

 
537 pieces

Question 37 1
/ 1 pts

 A specification that specifies brand names, model numbers and other information.

 
Brand specification

 
Proprietary specification

 
Performance specification

 
Descriptive specification

Question 38 1
/ 1 pts

The part of the contract documents consisting of a detailed description of the

technical nature of the materials, standards, and quality of execution of the work to
be placed under contract.

 
Specifications

 
Bidding documents

 
Construction documents

 
Contract documents

Question 39 1
/ 1 pts

Using 30 m² / gallon, how many gallons of latex paint can be used to paint the
surface area of a 20.00 m. x 3.00 m. concrete fence?

 
1.5 gallons

 
2 gallons

 
3 gallons

 
4 gallons

Question 40 1
/ 1 pts

How many pieces of 300 mm x 300 mm ceramic floor tiles are needed for a 9.00
m² room?

 
90 pieces

 
81 pieces

 
100 pieces

 
270 pieces

Question 41 1
/ 1 pts

A slight convex curvature intentionally built into a beam, girder, or truss to

compensate for an anticipated deflection.

 
Upward spring line

 
Arch

 
Camber

 
Span

Question 42 1
/ 1 pts

A heavy mass mounted on rollers and attached to the upper portion of a tall
building with spring damping mechanisms.

 
Aerodynamic damper

 
Tuned mass damper

 
Internal damper

 
Base isolation

Question 43 1
/ 1 pts

A high-strength steel bar for pre-stressing concrete.

 
Cable

  
Strand

 
Jack

 
Tendon

Question 44 1
/ 1 pts

The process of building, from site preparation through erection, assembly, and
finishing operations.

 
Assembly

 
Erection

 
Construction

 
Building

Question 45 1
/ 1 pts

Describing a building having a moderately large number of stories, usually 5 to 10,

and equipped with elevators.

 
High-rise building

 
Skyscraper

 
Mid-rise building

 
Low-rise building

Question 46 1
/ 1 pts

A foundation used in yielding soil, having for its footing a raft placed deep enough
that the weight of the excavated soil is equal to or greater than the weight of the
construction supported.

 
Deep foundation

 
Floating foundation

 
Pile foundation

 
Mat foundation

Question 47 1
/ 1 pts

A system of removal and interchangeable floor panels supported on adjustable

pedestals for access below.

 
Floor access system

 
Metal decking system

 
Raised flooring system

 
Crawl space system

Question 48 1
/ 1 pts

A glass fronted exterior masonry wall that absorbs solar heat for radiation into the
interior of a building.

 
Shear wall

  
Glass wall

 
Drum wall

 
Trombe wall

Question 49 1
/ 1 pts

A screen, usually louvers, placed on the outside of a building to shield the

windows from direct sunlight.

 
Brise-soleil

 
Shutter blind

 
Trellis

 
Grillage

Question 50 1
/ 1 pts

A tall, acutely tapering pyramidal structure surmounting a steeple or tower.

 
Finial

 
Steeple

 
Spire

 
Fléce

Question 51 1
/ 1 pts
Ability to store electric charge; measure of this ability, the ratio of induced charge
to potential difference

 
Inductance

 
Impedance

 
Conductance

 
Capacitance

Question 52 1
/ 1 pts

Property of transferring or measure of the ability to transfer electric current in a

circuit.

 
Inductance

 
Impedance

 
Conductance

 
Capacitance

Question 53 1
/ 1 pts

Unit of Electrical Conductance.

 
Farad

 
Ohm

 
Coloumb

 
Henry

Question 54 1
/ 1 pts

Unit of Electrical Capacitance.

 
Coloumb

 
Farad

 
Henry

 
Ohm

Question 55 1
/ 1 pts

Unit of Electrical Charge.

 
Farad

 
Ohm

 
Coloumb

 
Henry

Question 56 1
/ 1 pts

Loudspeaker for reproducing chiefly low-pitched sounds

 
Treble

 
Tweeter

  
Bass

 
Woofer

Question 57 1
/ 1 pts

Sound across a wide range of frequencies, capable of blocking out other noises.

 
Echo

 
Reverb

 
Doppler

 
White Noise

Question 58 1
/ 1 pts

Recording or transmitting of sound by means of two separate channels

 
Stereophonic

 
Supersonic

 
Assonance

 
Mono aural

Incorrect
Question 59 0
/ 1 pts

In theatre acoustics, a floor or room underneath the stage

  
Pit

 
Orchestra

 
Loge

 
Mezzanine

Question 60 1
/ 1 pts

The ratio of the luminous flux from a surface to a luminous flux incident on it

 
Reflectance

 
Luminance

 
Deflectance

 
Resistance

Question 61 1
/ 1 pts

The critical period for elevators serving commercial office building is the ______
incoming peak

 
Midday

 
Morning

 
Evening

 
Late Morning

Incorrect
Question 62 0
/ 1 pts

Elevator textbook guidance deals mainly with the type of traffic expected in office
development, it cannot be normally applied to a ________building.

 
Industrial

 
Hospital

 
Museum

 
Residential

Question 63 1
/ 1 pts

Which of the following is not a component of a hydraulic elevator?

 
Counterweight

 
Plunger

 
Oil Reservoir

 
Gate Valve

Question 64 1
/ 1 pts
Type of conveyor which can be used as a quick & convenient answer to pedestrian
movement in all types of public building.

 
Escalator

 
Belt conveyor

 
Travelator

 
Elevator

Question 65 1
/ 1 pts

Which of the following metallic materials is considered as the best conductor of

electricity?

 
Aluminium

 
Copper

 
Gold

 
Iron

Question 66 1
/ 1 pts

The quality of elevator service depends upon two basic factors.

 
  

 
Control/ Performance

 
Capacity/Waiting Time

 
Building Function

 
Height/Layout

Incorrect
Question 67 0
/ 1 pts

The effective room temperature in air-conditioning.

 
69-77°F

 
72-85°F

 
68-74°F

 
64-78 °F

Question 68 1
/ 1 pts

Angle of rise for escalator installation with floor level ht. R X1.73/1.45

 
15-25deg

 
25-40deg

  
30-35deg

 
18-28deg

Question 69 1
/ 1 pts

Human ear can detect sounds in the range of

 
10 –15 Khz

 
1 – 30 Khz

 
5 Hz –180 Hz

 
20Hz- 20Khz

Question 70 1
/ 1 pts

Which is not part of categories of sound absorber?

 
Panel Absorber

 
Panel/Porous

 
Liquid Absorber

 
Porous Absorber

 Question 71 1
/ 1 pts

A private telephone system that interconnects with public telephone systems.

 
Internet

 
Intercom

 
PABX

 
Ethernet

Incorrect
Question 72 0
/ 1 pts

Another term for squatting type of water closet.

 
Island

 
Nomadic

 
LowDown

 
Asiatic

Question 73 1
/ 1 pts

Based on the PD 1185, the maximum distance of each fire stairs/exit should be _ ,
if the building is protected with fire sprinkler system.
 

 
46 meters

 
61 meters

 
45 meters

 
60 meters

Question 74 1
/ 1 pts

Cut away front seats accessories for WC’s are suitable for

           

 
Male use

 
Elderly use

 
Child use

 
Female use

Question 75 1
/ 1 pts

What is to be provided with rubber inserts to absorbs shocks and avoid danger of
cracking

                 

 
Seat & Cover

  
Tub & Shower

 
Lavatory & Vanity

 
WC & Urinal

Question 76 1
/ 1 pts

Which of the following device used to convert voltage from higher to lower or vice
versa?

 
Transformer

 
Generator

 
Initiator

 
Converter

Question 77 1
/ 1 pts

In a circuiting guidelines, good practic suggest that load should not exceed 1200
watts for a 15A circuit & 1600 watts for a 20A circuit such that maximum area
is___respectively.

 
35 & 48 sqm

 
50 & 60 sqm

 
60 & 70 sqm

  
40 & 53sqm

Question 78 1
/ 1 pts

Trichloromonofluoromethane refers to ‘Freon’ tradename as

 
Freon 03

 
Freon 11

 
Freon 13

 
Freon 12

Question 79 1
/ 1 pts

An Air Handling Unit (AHU) is equipped with the following; Filters, Pre-Heater,
Spray, Cooling Coils & ________;

 
Resplitter

 
Reheater

 
Refresher

 
Recoiler

Question 80 1
/ 1 pts

In a Split Type Airconditioning System, FCU stands for;

 
Fan Coil Unit

 
Funnel Compress Unit

 
Full Compress Unit

 
Filter Combing Unit

Question 81 1
/ 1 pts

In a sensing device under the control equipment, it is a controller sensitive to the

amount of humidity in the air.

 
Hybridstat

 
Hydrostat

 
Hygrostat

 
Heliostat

Question 82 1
/ 1 pts

A boiler mounted on a self-propelled track used to furnish motivating power for

traveling on rails.
 

 
Mobile

 
Track

 
Railway

 
Locomotive

Question 83 1
/ 1 pts

Under the control equipment, an operating devices that uses electrical energy to
amplify or convert the power of a thermostat or other controllers so that the
resultant force will be sufficient & adaptable to operate a valve or damper.

 
Controller

 
Relays

 
Delays

 
Inverter

Question 84 1
/ 1 pts

The type of filter in an air cleaning equipment, which consist of metal deflecting
plates or screen coated with what oil?

 
  
Viscous Oil

 
High Grade Oil

 
Gear Oil

 
Machine Oil

Incorrect
Question 85 0
/ 1 pts

What method of distribution under the mechanical warm air heating system, where
the medium is air and handled by ducts & heated by a furnace?

 
Recirculate

 
Radiators

 
Rovers

 
Registers

Question 86 1
/ 1 pts

Types of Urinal

 
Slab/ Close

 
Wet/ Dry

 
Leaf / Cup Type

  
Bowl/Slab Type

Question 87 1
/ 1 pts

Ablution fountains are designed to allow 6- 8 persons to wash at the same time is
best use at?

 
Hotels

 
Factories

 
Housing

 
Hospitals

Question 88 1
/ 1 pts

The code in circuiting guidelines requires that at least one _____ ampere circuit
supply the laundry outlet.

 
15 Amp

 
20 Amp

 
30 Amp

 
13 Amp

Question 89 1
/ 1 pts
A fitting which controls flow along the line of supply.

 
Valve

 
Bib

 
Tap

 
Cocks

Question 90 1
/ 1 pts

A fitting which is used for draw off purposes

 
Cocks

 
Valve

 
Tap

 
Bib

Question 91 1
/ 1 pts

Electromagnetic radiation having wavelengths from about 800 nm, contiguous to

the red end of the visible spectrum, to 1 nm, on the border of the microwave
region.

 
  
Infrared

 
Visible Light

 
Nanospectrum

 
Ultraviolet

Question 92 1
/ 1 pts

This is an acoustical phenomenon which causes sound waves to be bent or

scattered around such obstacle as corners, columns, walls, beams, etc.

 
Sound Distraction

 
Sound Diffraction

 
Sound Refraction

 
Sound Distribution

Question 93 1
/ 1 pts

A fitting or part of an appliance or pipe arranged to retain water so as to prevent

the passage of foul air.

 
Stack

 
Trap

 
Soil

  
Vent

Incorrect
Question 94 0
/ 1 pts

It is possessed by a room, where the sound of different musical instruments

played simultaneously is easily distinguishable.

 
High Fidelity

 
Fullness of Tone

 
Definition

 
Good Blend

Question 95 1
/ 1 pts

Which of the spaces requires attention on its acoustics complexities?

 
Radio station

 
Conference Hall

 
Recording Studio

 
Concert Hall

Incorrect
Question 96 0
/ 1 pts

Trees and vegetation are not effective as noise control barriers because of its
leaves and branches termed as reduced or;

 
Bermed

 
Deducted

 
Attenuated

 
Protracted

Question 97 1
/ 1 pts

Liquid sewage that has been treated in a septic tank or sewage treatment plant.

 
Scum

 
Sludge

 
Effluent

 
Waste water

Question 98 1
/ 1 pts

Size of water piping shall be based on a total___?

 

 
Water Potability

 
Water Consumption

 
Water Demand

 
Budgetary Cost

Question 99 1
/ 1 pts

What fits between a Closet Flange and a Toilet Bowl?

 
Wax Ring

 
Spud Washer

 
O-Ring

 
Rope Washer

Question 100 1
/ 1 pts

What type of adhesive used to caulk around wet surfaces?

 
Solvent Glue

 
Silicone

  
Resin Glue

 
Animal Glue

Incorrect
Question 101 0
/ 1 pts

1 Gpa is equal to?

 
1,000,000 N/ m²

 
1 N/ m²

 
1,000,000,000 N/ m²

 
1,000 N/ m²

Question 102 1
/ 1 pts

The sum total of all the external forces measured from the supports of a beam

 
Equilibrant

 
Reaction

 
Resultant

 
Inertia

Question 103 1
/ 1 pts

A force acting perpendicular to the surface of an object which tend the material to
slip past the adjacent part.

 
Tangential stress

 
Axial stress

 
Bearing stress

 
Shear stress

Question 104 1
/ 1 pts

The contact force between two opposing objects.

 
Compression

 
Force couple

 
Bearing stress

 
Axial stress

Question 105 1
/ 1 pts

A design analysis as a basis where the total lateral forces are distributed to the
various horizontal elements of the lateral force resisting system.
  
Distribution of Horizontal Shear

 
Stability against Overturning

 
Data Distribution

 
Shear and Moment Diagram

Question 106 1
/ 1 pts

The distance from the support to the span of a beam where shear force is
decreasing and moment is increasing.

 
Inflection Point

 
Shear Diagram

 
Moment Diagram

 
Development Length

Question 107 1
/ 1 pts

The main reinforcing bar resisting tension at the span of a beam.

 
Top Bar

 
Extra Bar

 
Bottom Bar

 
Main Bar

Question 108 1
/ 1 pts

For any given granular material, the steepest angle with horizontal, a heaped soil
surface will make in normal condition that will not slide.

 
Angle of surface tension

 
Angle of inclination

 
Angle of cohesion

 
Angle of repose

Question 109 1
/ 1 pts

The linear portion of the stress-strain diagram of steel is known as the:

 
Elastic range

 
Modulus of elongation

 
Plastic range

 
LinearProportionality

Question 110 1
/ 1 pts
Classification of a load in a simple beam that theoretically produces a positive
moment.

 
Point load

 
Uniformly distributed load

 
Axial Load

 
Uniformly varying load

Question 111 1
/ 1 pts

The law that relates the linear relationship between stresses and strains:

 
Ohm’s law

 
Poisson’s law

 
Manaloto’s law

 
Hooke’s law

Question 112 1
/ 1 pts

Cracking of concrete in general is the result of:

 
High flexural stress due to bending

 
Excessive deflection

 
Restraint of volume change

 
All of the above

 Question 113 1
/ 1 pts

A wall designed to resist lateral forces parallel to the plane of the wall.

 
Curtain wall

 
Shear wall

 
Bearing wall

 
Parallel wall

Incorrect
Question 114 0
/ 1 pts

The main reinforcing bar resisting tension at the support of a beam.

 
Top Bar

 
Main Bar

 
Bottom Bar

 
Extra Bar

Question 115 1
/ 1 pts

The deformation of a structural member as a result of loads acting on it.

 
Deflection

 
Camber

  
Inflection

 
Stress

Question 116 1
/ 1 pts

A rigid structural member designed to carry and transfer transverse loads across
spaces to the supporting elements.

 
Beam

 
Column

 
Foundation

 
Brace

Question 117 1
/ 1 pts

Classification of a load produced by a dead load.

 
External Load

 
Point Load

 
Lateral Load

 
Gravity Load

Question 118 1
/ 1 pts
Resistance offered to the movement of one body past another body with which it is
in contact.

 
Force

 
Strain

 
Friction

 
Stress

Question 119 1
/ 1 pts

Weakening or failure of a material at a stress below the elastic limit when

subjected to a repeated series of stresses

 
Fracture

 
Fatigue

 
Strain

 
Stress

Question 120 1
/ 1 pts

Type of beam connection free from horizontal stress

 
Roller connection

 
Pin connection

 
Fixed end connection

  
Loose connection

Question 121 1
/ 1 pts

Classification of a load produced by earthquake.

 
Seismic Load

 
Moving load

 
Gravity Load

 
External Load

Question 122 1
/ 1 pts

For a system to be in equilibrium, the sum of the external forces acting on the
system must be:

 
Maximum

 
Minimum

 
Zero

 
Infinite

Question 123 1
/ 1 pts

Type of beam connection carrying the moment, horizontal, and vertical stresses
  
Loose connection

 
Bolted connection

 
Fixed end connection

 
Pin connection

Question 124 1
/ 1 pts

A deformed bar, embedded in a concrete construction at a joint and designed to

hold a butting edges together, not designed for direct load transfer

 
Buttress

 
Stirrup

 
Dowel

 
Tie bar

Question 125 1
/ 1 pts

Type of beam supported by a row of columns

 
Cantilever

 
Restrained Beam

 
Continuous beam

 
Semi- continuous beam

Question 126 1
/ 1 pts

The minimum length of straight reinforcing bar or reinforcing rod which is required
to anchor it in concrete

 
Effective length

 
Development length

 
Cross-sectional area

 
Anchor Rod

Question 127 1
/ 1 pts

The distance measured along the full length of a beam.

 
Clear span

 
Span

 
Development length

 
Neutral axis

Question 128 1
/ 1 pts

These are lateral loads except one

 
Movable load

 
Rolling Load

  
Wind load

 
Seismic load

Question 129 1
/ 1 pts

The distance between inner faces of the support

 
Effective span

 
Neutral distance

 
Neutral axis

 
Clear span

Incorrect
Question 130 0
/ 1 pts

Part of the Stress profile in RC beam measured from the extreme compressive
fiber to the central axis of the reinforcing steel bar.

 
Compression

 
Tension

 
Camber

 
Effective length

Question 131 1
/ 1 pts

Honey comb and voids in concrete can be limited by the use of ________.
  
Fine aggregates

 
Admixtures in concrete mix

 
Chlordane chemical

 
Vibrator

Question 132 1
/ 1 pts

The analysis of the stress, strain and deflection characteristics of structural

behavior is referred to.

 
Plastic analysis

 
Structural analysis

 
Plastic analysis

 
Truss analysis

Question 133 1
/ 1 pts

A property of a body that defines its resistance to a change in angular velocity

about an axis of rotation.

 
Ductility

 
Brace System

 
Elasticity

 
Moment of inertia

Question 134 1
/ 1 pts

The property of a material that enables it to deform in response to an applied force

and to recover its original proportion upon removal of the force.

 
Malleability

 
Deformity

 
Ductility

 
Elasticity

Question 135 1
/ 1 pts

The measure of the stiffness of a material is called:    

 
Effective length

 
Proportional limit

 
Malleability

 
Stiffness ratio

Question 136 1
/ 1 pts

The milky layer composed of cement and fine aggregate on the upper surface of
the concrete mass during curing process due to an excess amount of water used:

 
Laitance

 
Plaster

  
Excess

 
Mortar

Question 137 1
/ 1 pts

An imaginary line passing through the centroid of the cross section of a beam,
along which no bending stresses occur.

 
Clear span

 
Radius of curvature

 
Effective span

 
Neutral axis

Question 138 1
/ 1 pts

The section of a beam at which the bending moment changes from positive to
negative and at this section, the magnitude of the bending moment is zero.

 
Zero shear

 
Beam analysis

 
Bending moment

 
Inflection point

Incorrect
Question 139 0
/ 1 pts
GPa is equal to?

 
1,000 N/ mm2

 
1,000,000 N/ mm2

 
1 N/ mm2

 
1,000,000,000 N/ mm2

Question 140 1
/ 1 pts

The center to center distance between the supports of a beam.

 
Clear span

 
Neutral axis

 
Effective span

 
Inflection Point

Question 141 1
/ 1 pts

(NSCP 407.7.3) The minimum clear spacing between parallel bars in a layer must
be db but not less than? 

 
25mm

 
30mm

 
35mm

 
20mm

Question 142 1
/ 1 pts

The maximum usable strain at the extreme concrete compression fiber shall be
assumed to be equal to:

 
0.001

 
0.004

 
0.002

 
0.003

Question 143 1
/ 1 pts

(NSCP 412.3.1) Development length for deformed bars in tension shall be less
than.

 
200 mm

 
300 mm

 
150 mm

 
275mm

Question 144 1
/ 1 pts

The term in working stress design, refers to reinforced concrete beam in which the
cross-sectional areas of concrete and steel are of such dimensions that each
develops its full allowable stress simultaneously:
  
Elastic Theory

 
Balanced Design

 
Plastic Theory

 
Stress Design

Question 145 1
/ 1 pts

The minimum lap splice for reinforcing bars.

 
50 db but not less than 700 mm

 
50 db but not less than 600 mm

 
40 db but not less than 600 mm

 
30 db but not less than 600 mm

Question 146 1
/ 1 pts

A groove which is formed, sawed, or tooled in a concrete or masonry structure to

regulate the location and amount of cracking and separation resulting from the
dimensional change of different parts of the structure, thereby avoiding the
development of high stresses.

 
Control joint

 
Construction joint

 
Separation joint

 
Stress joint

Question 147 1
/ 1 pts

How is a 90 degree bend standard hook for concrete reinforcement constructed?

 
90 degree bend plus 12 db extension, at free end of the bar

 
90 degree bend plus 10 dbextension, at free end of the bar

 
All of the above

 
90 degree bend plus 6db extension, at free end of the bar

Question 148 1
/ 1 pts

Steel reinforcement which is placed in a concrete slab, or the like, to minimize the
possibility of developing cracks as a result of temperature changes.

 
Bottom bar

 
Temperature bar

 
Metal plate

 
Extra bar

Question 149 1
/ 1 pts

An imaginary cross section of a beam in which the steel is replaced by a

hypothetical concrete area that is n times the area of thesteel. The imaginary
concrete area has the same modulus of elasticity as the concrete in compression
above the neutral axis:

 
Effective section

  
Transformed section

 
Neutral axis

 
Modulus of rupture

Question 150 1
/ 1 pts

(NSCP 403.20) A complete record of test of materials and of concrete shall be

available for inspection during the progress of work. How many years after
completion of the project shall certificates be preserved by the inspecting engineer
or architect.

 
5 years

 
2 years

 
1 year

 
3 years

Quiz Score:
132 out of 150