THK AFF Grease
THK AFF Grease
THK AFF Grease
1030-T06993
Hazardous information
#1 A component is considered hazardous according to ACGIH.
Because it carries the Threshold Limit Values (TLV) for 2,6-Di-tert-butyl-p-cresol.
EMERGENCY OVERVIEW
Warning statement:
Caution! Prolonged or repeated contact with skin may cause irritation in some cases.
Precautionary Measures:
Avoid breathing vapor and mist. Keep container closed.
Avoid contact with eyes, skin, and clothing.
Wash thoroughly after handling. Keep away from heat.
Potential health effect:
Eyes: May cause minor irritation.
Skin: May cause minimal skin irritation.
Inhalation: Vapor or mist, in excess of permissible concentrations, or in unusually high concentrations
generated from spraying, heating the material, or as from exposure in poorly ventilated
areas or confined spaces, may cause irritation of the nose and throat, headache, nausea,
and drowsiness.
Ingestion: May cause abdominal discomfort, nausea, or diarrhea.
Sensitization properties: Unknown
Chronic Properties: If prolonged exposure occurs, nausea, headache, diarrhea, and physical discomfort.
Other remarks: None
Eyes: Flush immediately with water for at least 15 minutes. Get immediate medical attention.
Skin: Wash with soap and water. Get medical attention if irritation develops.
Launder contaminated clothing before reuse.
Inhalation: Remove exposed person to fresh air if adverse effects are observed.
Ingestion: Do not make person vomit unless directed to do so by medical personnel.
Note to physician: Treat symptomatically.
Do not weld, heat or drill container. Replace cap or bung. Emptied container still contains hazardous material which
may ignite with explosive violence if heated sufficiently.
Minimum feasible handling temperatures should be maintained.
Periods of exposure to high temperatures should be minimized.
Water contamination should be avoided.
CAUTION: Do not use pressure to empty drum or drum may rupture with explosive force.
Stability: Stable
Conditions to Avoid: See the Handling and storage section for further details.
Incompatibility (materials to avoid): Acids. Oxidizing agents. Halogens and halogenated compounds.
Hazardous Polymerization: Will not occur
Thermal decomposition: Smoke, carbon monoxide, aldehydes and other products of incomplete
combustion. Hydrogen sulfide and alkyl mercaptans and sulfides may
also be released. Under combustion conditions, oxides of the following
elements will be formed: Calcium, Sulfur, Zinc.
The U.S.TSCA inventory: All components of this material are on the US TSCA inventory.
The EC EINECS inventory: A component of this material is on the EC ELiNCS inventory.
The other components are on the EC EINECS inventory.
The CANADA DSl inventory: May require notification before sale in CANADA.
The AUSTRALIA AICS inventory: May require notification before sale in AUSTRALIA.
The KOREA TCCl inventory: All components of this material are on the TCCl inventory.
The PHILIPPINE PICCS inventory: All components of this material are on the PICCS inventory.
References:
Material safety data sheets are provided as reference information on the safe handling of hazardous or harmful
materials to companies using such materials. When referring to this data sheet, companies should remember that
they must take responsibility for implementing the proper measures for their own particular situations. This data
sheet is not a guarantee of safety.