Key Features: SM Series
Key Features: SM Series
Key Features: SM Series
SM118/N
S M S e r i e s
KEY FEATURES
• High power handling (400 w AES)
• 3” (77 mm.) copper voice coil with apical former
• Optimum winding length for increased linear
excursion
• Extended response in the medium frequency range
• Designed for high power woofer applications
GENERAL DESCRIPTION
The design concept of this low frequency transducer arises from the need of achieve a more resistant loudspeaker that matches
the more and more power given by ultimate amplification systems. In order to accomplish that, almost every component of the
speaker has been reconsidered. The SM-118/N incorporates a 3” voice coil made with high quality materials: copper round wire
with high temperature bonding strength and apical former. Moreover, it features a powerful magnet system with rear air
ventilation. All these facts result in a 18” driver with extended and smooth low-mid frequency response, reduced harmonic
distortion, good efficiency and excellent power handling (400 w AES). The SM-118/N is specially recommended for woofer
applications.
5,0
4,0
dB
3,0
2,0
1,0
50 120 190 260 330 400
Power (W)
Note: Bass-reflex cabinet, Vb=150 l, fb=45 Hz
Note: These losses are calculated from a five minutes AES power test
applying band limited pink noise (25-1200 Hz). The loudspeaker is free-air
standing.
SM118/N
SM118/N
S M S e r i e s
THIELE-SMALL PARAMETERS **
Notes:
Resonant frequency, fs 36 Hz
D.C. Voice coil resistance, Re 6.4 ohms. *The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
Mechanical Quality Factor, Qms 6.83
**T-S parameters are measured after an exercise period using a preconditioning power test.
Electrical Quality Factor, Qes 0.53 The measurements are carried out with a velocity-current laser transducer and will reflect the long
Total Quality Factor, Qts 0.49 term parameters (once the loudspeaker has been working for a short period of time).
acústica beyma,s.a.
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·