Physics PPT Induct

Shrestha kumar
Name – Abhishek kumar

mishra
Class – XII A
Roll no. – 2015 - 2016
CONTENT Page no.
CERTIFICATE 1
ACKNOWLEDGEMENT 2
AIM OF PROJECT 3
INTRODUCTION 4-5
THEORY 6-11
OBSERVATION 12
CONCLUSION
13
APPLICATIONS OF EMI
14
PRECAUTIONS
15
BIBLIOGRAPHY
16
shrestha kumar mishra
2022-2023
Teacher’s signature Principal ‘s signature

L.N PATHY sir
.
Electro Magnet:
An electromagnet is a type of magnet in which the magnetic field is produced
by electric current. The magnetic field disappears when the current is turned off.
Induction:
This process of generating current in a conductor by placing the conductor in a
changing magnetic field is called induction.
Electromagnetic Induction:
Electromagnetic induction is the production of a potential difference (voltage)
across a conductor when it is exposed to a varying magnetic field.
Electromagnetic induction is when an electromagnetic field causes molecules in
another object to flow. Induction can produce electricity (in coils), heat (in ferrous
metals), or waves (in a radio transmitter).
Finally it is refers to the phenomenon where an emf is induced when the magnetic
flux linking a conductor changes.
Magnetic Flux is defined as the product of the magnetic flux density and the
area normal to the field through which the field is passing. It is a scalar quantity
and its S.I. unit is the weber (Wb).
φ = B A
Principle:
Electromagnetic induction (or sometimes just induction) is a process where a
conductor placed in a changing magnetic field (or a conductor moving through a
stationary magnetic field) causes the production of a voltage across the conductor.
This process of electromagnetic induction, in turn, causes an electrical current - it
is said to induce the current.
Invention:
Michael Faraday is generally credited with the discovery of induction in 1831
though it may have been anticipated by the work of Francesco Zantedeschi in 1829.
Around 1830 to 1832, Joseph Henry made a similar discovery, but did not publish
his findings until later
Induced e.m.f.s :
If magnetic flux through a coil is altered then an e.m.f. will be generated in the
coil. This effect was first observed and explained by Ampere and Faraday between
1825 and 1831. Faraday discovered that an e.m.f. could be generated either by,
(a) moving the coil or the source of flux relative to each other or by
(b) changing the magnitude of the source of magnetic flux in some way.
Note that the e.m.f. is only produced while the flux is changing.
For example, consider two coils as shown in Figure 1.

Coil A is connected to a galvanometer and coil B is connected to a battery and has
direct current flowing through it. Coil A is within the magnetic field produced by B
and an e.m.f. can be produced in A by moving the coils relative to each other or by
changing the size of the current in B. This can be done by using the rheostat R,
switching the current on or off, or (c) using an a.c. supply for B.
(An e.m.f. could also be produced in coil A by replacing coil B with a permanent
magnet and moving this relative to coil A.)
Representation:
Electromagnetic induction is the production of a potential difference (voltage)
across a conductor when it is exposed to a varying magnetic field.
Working and Construction:

Current is produced in a conductor when it is moved through a magnetic field
because the magnetic lines of force are applying a force on the free electrons in
the conductor and causing them to move. This process of generating current in a
conductor by placing the conductor in a changing magnetic field is called induction.
This is called induction because there is no physical connection between the
conductor and the magnet. The current is said to be induced in the conductor by
the magnetic field.
One requirement for this electromagnetic induction to take place is that the
conductor, which is often a piece of wire, must be perpendicular to the magnetic
lines of force in order to produce the maximum force on the free electrons. The
direction that the induced current flows is determined by the direction of the
lines of force and by the direction the wire is moving in the field. In the animation
above the ammeter (the instrument used to measure current) indicates when there
is current in the conductor.
If an AC current is fed through a piece of wire, the electromagnetic field that is
produced is constantly growing and shrinking due to the constantly changing
current in the wire. This growing and shrinking magnetic field can induce electrical
current in another wire that is held close to the first wire. The current in the
second wire will also be AC and in fact will look very similar to the current flowing
in the first wire.
It is common to wrap the wire into a coil to concentrate the strength of the
magnetic field at the ends of the coil. Wrapping the coil around an iron bar will
further concentrate the magnetic field in the iron bar. The magnetic field will be
strongest inside the bar and at its ends (poles).
Lenz's Law:
When an emf is generated by a change in magnetic flux according to Faraday's

Law, the polarity of the induced emf is such that it produces a current whose
magnetic field opposes the change which produces it. The induced magnetic field
inside any loop of wire always acts to keep the magnetic flux in the loop constant.
In the examples below, if the B field is increasing, the induced field acts in
opposition to it. If it is decreasing, the induced field acts in the direction of the
applied field to try to keep it constant.
Applications of electromagnetic Induction
Electrical Generator:
The EMF generated by Faraday's law of induction due to relative movement of a
circuit and a magnetic field is the phenomenon underlying electrical generators.
When a permanent magnet is moved relative to a conductor, or vice versa, an
electromotive force is created. If the wire is connected through an electrical load,
current will flow, and thus electrical energy is generated, converting the
mechanical energy of motion to electrical energy
Electrical transformer
The EMF predicted by Faraday's law is also responsible for electrical
transformers. When the electric current in a loop of wire changes, the changing
current creates a changing magnetic field. A second wire in reach of this magnetic
field will experience this change in magnetic field as a change in its coupled
magnetic flux, d ΦB / d t. Therefore, an electromotive force is set up in the second
loop called the induced EMF or transformer EMF. If the two ends of this loop are
connected through an electrical load, current will flow.
Magnetic flow meter:
Faraday's law is used for measuring the flow of electrically conductive liquids and
slurries. Such instruments are called magnetic flow meters. The induced voltage ℇ
generated in the magnetic field B due to a conductive liquid moving at velocity v is
thus given by:
where ℓ is the distance between electrodes in the magnetic flow meter.

Faraday’s Law of
Electromagnetic Induction, first observed and published by
Michael Faraday in the mid-nineteenth century, describes a
very important electro-magnetic concept. Although its
mathematical representations are cryptic, the essence of
Faraday’s is not hard to grasp: it relates an induced electric
potential or voltage to a dynamic
magnetic field. This concept has
many far-reaching ramifications
that touch our lives in many ways:
from the shining of the sun, to
the convenience of mobile
communications, to electricity to
power our homes. We can all
appreciate the profound impact
Faraday’s Law has on us.
The principles of electromagnetic induction are
applied in many devices and systems, including:
 Electrical generators
 Induction motors
 Induction sealing
 Inductive charging
 Transformers
 Wireless energy transfer
Keep yourself safe from high voltage.
Use & handle lab instruments with care.
Do not scratch insulated copper wire while

making loop.
Do not use digital voltmeter for above

demonstration .
 Wikipedia.com
 Google search engine
 Physics Ncert book for class XII

Physics PPT Induct

Uploaded by

Copyright:

Available Formats

Physics PPT Induct

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Physics PPT Induct

Uploaded by

Copyright:

Available Formats

Shrestha kumar

Name – Abhishek kumar

Teacher’s signature Principal ‘s signature

For example, consider two coils as shown in Figure 1.

Working and Construction:

When an emf is generated by a change in magnetic flux according to Faraday's

Applications of electromagnetic Induction

where ℓ is the distance between electrodes in the magnetic flow meter.

Use & handle lab instruments with care.

Do not scratch insulated copper wire while

Do not use digital voltmeter for above

You might also like