DSTV Frequency Set Up Guide Version 8 All
DSTV Frequency Set Up Guide Version 8 All
DSTV Frequency Set Up Guide Version 8 All
SINGLE VIEW, DUAL VIEW AND SD PVR ONLY (VERSION 8) - EXLUDES SINGLE VIEW HD
These settings will only work on Single View, Dual View and SD PVR decoders.
The Scan should start immediately and collect all your channels.
If the scan starts, but does not continue -
Press the "Menu" button and scroll down to "Scan All Networks" and press "OK"
This will start the scan again and should solve this problem.
In the event of missing channels or the decoder not scanning at all, please contact
our offices on 083 451 0645 or 083 445 1263 Email - complex@dstvtime.co.za
Complete table of Frequencies and details that you should now have on
your Single View or SD PVR decoder:
4 Once all the Additional Networks have been set, press the YELLOW button on your remote.
This will "Scan all Enabled Networks"
An "Installation Scan" screen will now be displayed and your decoder will collect all of the channels.
In the event of channels completely missing or the decoder not scanning at all, please contact our
our offices on 083 451 0645 or 083 445 1263 Email - complex@dstvtime.co.za
Complete table of Frequencies and details that you should now have
on your HD PVR:
1 Connect your Satellite cable from the wall directly into the UNICABLE IN connector on the back of the
decoder (EXPLORA) or LNB IN (SINGLE VIEW HD). DO NOT CONNECT THE EXPLORA SWITCH (EXPLORA).
2 Plug the power supply into the decoder.
3 The DSTV INSTALLATION WIZARD screen will appear showing STEP 1 of 4.
4 Press OK to select NEXT STEP.
5 STEP 2 of 4 will appear - DON'T CHANGE ANYTHING HERE.
6 Press OK to select NEXT STEP.
7 STEP 3 of 4 will appear.
8 Use the DOWN ARROW to highlight LNB Type and then press the RIGHT ARROW to select SMATV.
9 Press the DOWN ARROW twice to select Scan and then press OK.
10 If an error message appears saying that the Signal is too low - just press OK on the remote to continue.
11 STEP 4 of 4 will appear and the decoder will start to scan the networks.
12 Eventually, channel 100 will appear but you will not be able to select any other channels yet.