Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 58 views

    Scope of Work

    Uploaded by

    FANTASY 11
    The document outlines the scope of work for supplying, installing, and commissioning a fire water pump at a BPCL plant in Panipat, India. Key details include supplying a horizontal split case pump with a capacity of 615 cubic meters per hour compatible with an existing Cummins NT-855F engine. The vendor must visit the site, supply all necessary documentation, satisfactorily run the pump for a week, and provide a 12-month warranty. The entire job from supply to commissioning is the vendor's responsibility.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Scope of Work

    Uploaded by

    FANTASY 11
    58 views2 pages
    The document outlines the scope of work for supplying, installing, and commissioning a fire water pump at a BPCL plant in Panipat, India. Key details include supplying a horizontal split case pump with a capacity of 615 cubic meters per hour compatible with an existing Cummins NT-855F engine. The vendor must visit the site, supply all necessary documentation, satisfactorily run the pump for a week, and provide a 12-month warranty. The entire job from supply to commissioning is the vendor's responsibility.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines the scope of work for supplying, installing, and commissioning a fire water pump at a BPCL plant in Panipat, India. Key details include supplying a horizontal split case pump with a capacity of 615 cubic meters per hour compatible with an existing Cummins NT-855F engine. The vendor must visit the site, supply all necessary documentation, satisfactorily run the pump for a week, and provide a 12-month warranty. The entire job from supply to commissioning is the vendor's responsibility.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    58 views2 pages

    Scope of Work

    Uploaded by

    FANTASY 11
    The document outlines the scope of work for supplying, installing, and commissioning a fire water pump at a BPCL plant in Panipat, India. Key details include supplying a horizontal split case pump with a capacity of 615 cubic meters per hour compatible with an existing Cummins NT-855F engine. The vendor must visit the site, supply all necessary documentation, satisfactorily run the pump for a week, and provide a 12-month warranty. The entire job from supply to commissioning is the vendor's responsibility.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SCOPE OF WORK

    Supply, Installation & Commissioning of Fire water Pump at BPCL Panipat

    1.Supply under this item shall be complete pump assembly without motor, Base

    Frame with following details:

    General Data:
    Type: Horizontal Split Case

    Make : Kirloskar/ Flowmore/Flowserve / Approved Equivalent


    Discharge Head: 105Metres

    Power required by Pump: 282(approx.)


    Capacity (m3/hr): 615
    RPM: 1800
    Pump Efficiency: Min 86%
    Suction X Delivery Size- 250x200
    Pump Input-209.35 KW

    Liquid Handle/Application :Water transfer


    Range of Operation: 30% to 50%
    Design & Construction Features:
    Type of Pump casing: Axial

    Pump Duty (Continous/Axial): Continous

    Min. Flow pump can handle(m3/hr): 184

    Type of coupling between Pump and Drive: Flexible


    No. of Stages: Single
    Specific speed: 1172 Us units
    NPSH :5.5 m
    Material of Construction:
    Casing: CI
    Impeller-Ph. Bronze
    Wearing Ring(Casing): Cast iron
    Wearing Ring(Impeller): Ph. Bronze
    Shaft: SS 316
    Drive Data:

    Drive unit output at ambient condition: 395 HP


    Rated Speed: 1800 RPM
    SCOPE OF WORK

    2. Supplied pump should be compatible and fit properly with Engine of following pecs:
    Engine Details:
    Make- CUMMINS
    Model -NT-855F
    Power-395 H.P
    Speed-1800 R.P.M

    3. Vendors are requested to visit site so they can see Fire Engine & actual conditions of site and can
    quote correctly for the Pump Assembly.

    4.Vendor has to supply Pump which is compatible and fit properly with the existing Fire Engine. BPCL has
    no liability for any payment if vendor fails to supply the desired pump.

    5. Entire job of supply, installation & Commissioning of Pump will be in vendors Scope. No extra charges
    will be paid to the vendor for making any modification in foundation/ base, fittings etc. for installation &
    commissioning of Fire pump.

    6.Vendor has to satisfactorily run Pump Assembly for a duration of at least a week and as per
    satisfaction of officer-in-charge . Then only payment of vendor will be processed. Otherwise, no
    payment will be made by BPCL.

    7. Vendor shall submit relevant Material test certificate, Dynamic Balancing Report, Internal Inspection
    Report, Fitment/inter-changeability Certificate, performance test certificate, Guarantee certificate along
    with supply.

    8. Vendor shall submit the following documents along with the supply of material:
    a. Original GST invoice
    b. L.R./G.R copy
    c. Test Certificate

    9. Guarantee/ Warranty Period: Min. 12 months from the date of installation.

    You might also like