ET-88 MSDS - Electrical Contact Cleaner & Moisture Displacer
ET-88 MSDS - Electrical Contact Cleaner & Moisture Displacer
ET-88 MSDS - Electrical Contact Cleaner & Moisture Displacer
th
Fax Number: (044)23664764 Revision Date: 24 December 2014
Website www.jket.in Revision Number: 01
Ingestion Do not induce vomiting if a large amount is ingested. If vomiting occurs naturally, lean victim forward to minimize risk
of asphyxiation. Never give anything by mouth to an unconscious person. Call a physician.
Inhalation Remove person to fresh air immediately. Give artificial respiration if necessary. If there is difficulty in breathing, obtain
medical attention immediately.
Section 5: Fire Fighting Measures
Flash Point (°C) TCC Closed Cup: +78 (Liquid)
Extinguishing Media Carbon dioxide, dry chemical powder, foam, water spray or fog
Products of Combustion Carbon monoxide and carbon dioxide
Explosion Hazards Up on exposure to high heat from fire, aerosol containers may explode.
Protective Measures For Firefighters must wear protective gear for body, eyes and wear self contained breathing apparatus for
Fire Fighters protection from suffocation arising due to lack of oxygen and to protect from possible hazardous
decomposition products. Use water to cool fire exposed containers to prevent pressure build up and
from exploding.
Environmental Try to prevent the material from entering drains or water body. Do not flush into drains or water bodies.
Precautions
Personal Precautions Refer to Section 8
Section 7: Handling & Storage
Handling Avoid contact with skin and eyes. Do not breathe vapors or mists. Use with well ventilation. Wear
Protective equipment during handling. Wash thoroughly after handling. Do not spray into or around
Energized surfaces or sources of ignition. Read instructions on label.
Storage Store in a cool, dry area. Store away from strong oxidizing agents or combustible material. Aerosol cans
Must be stored below 50°C to prevent from exploding.
To the best of our knowledge, the information contained herein is accurate. This MSDS, therefore, forms a component only of a risk assessment
carried out by, or on behalf of, the user. It is not intended to constitute performance information concerning the product. No express warranty or
implied warranty of merchant ability or fitness for a particular purpose is made with respect to the product or the information contained herein.
However, they are supplied without warranty or guarantee of any kind either expressed or implied. The user is responsible for selecting and
determining the suitability of products for purchaser’s particular needs and we disclaim any responsibility for improper applications or misuse of our
products in any manner whatsoever.