Nothing Special   »   [go: up one dir, main page]

r48 5800a Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

E-SURE™ RECTIFIER

R48-5800A

Description
KEY FEATURES
The R48-5800A rectifier converts 380 to 415 VAC 3-phase supply voltages into stable
nominal -48V DC voltage adjustable to the needs of the application. The R48-5800A is a
Rectifier -48 VDC, 5800 W
constant power rectifier designed with the latest patented switch-mode technology
yy DSP (Digital Signaling using DSP (Digital Signaling Processor) functionality for efficient operation.
Processor)-means fewer
components, optimized
For a larger load capacity, rectifiers can be connected in parallel and intelligent control
operation and active load can be added with the help of a separate controller.
sharing for increased reliability

yy Delivers quality, performance


and reliability no matter
what the application or
location demands

yy High efficiency, up to 92%


reduces power consumption
for lower operating costs

yy Hot pluggable-facilitates
future extensions

yy Wide input voltage range


operates in the most demanding
environments where input
voltage changes

yy Wide temperature operating R48-5800A


range from -40°C to +65°C /
-40°F to +149°F meets
the harshest climatic
environment requirements

1
E-SURE™ RECTIFIER

Technical Specifications, R48-5800A Output Power vs. Temperature

% of max output power


120
100
AC INPUT 80
60

Input Voltage, Nominal 380VAC 40


20

Input Voltage, Permitted Variation 260 VAC to 530 VAC 0


-40 -30 -20 -10 0 10 20 30 40 50 60 70 80

Line Frequency 45 Hz to 65 Hz Temperature (C°)

Max Input Current 12 A


Power Factor 0.99 Output Power vs. input voltage

% of max output power


THD (Total Harmonic Distortion) <5% 120
100

DC OUTPUT 80
60
40
Output Voltage, Adjustment Range -42 VDC to -58 VDC 20
0
250 275 300 325 350 375 400 425 450 475 500 525 550
Output Power 5800 W @ Vout >48 VDC
Input voltage (VAC)
Output Power, Derated for Input Voltage See Diagram
Output Current 120 A

Output Current Limit Set Point 0 to 120 A

Efficiency 92.5%

Psophometric Noise (System) <2 mV

Temperature Derating See Diagram

CONTROL AND MONITORING


Rectifier Alarm and Signaling Alarm and status reported via CAN bus to system controller
Green Led = Normal Operation
Yellow Led = Alarm
Visual Indications
Red Led = Failure
Flashing Red Led = Fan Failure
Red LED = Failure; Flashing Red Led = Fan Failure
Current Indicator A 10-segment green LED is located on the front panel
to represent output current, each segment represents 10 A.

ENVIRONMENTAL
Temperature Range, Operating -40°C to +65°C / -40°F to +149°F
Temperature Range, Storage 40°C to +80°C / -40°F to +176°F
Relative Humidity 0 to 95%
Altitude 2000 m / 6560 ft at full power
EMC EN 300 386; class A
Safety IEC 60950, EN 60950, UL 60950

MECHANICS
88 x 244 x 380 (mm) /
Dimensions (H x W x D)
3.46 x 9.61 x 14.96 (inches)
Weight <10 kg / 22 lbs

Ordering Information
PRODUCT CODE DESCRIPTION
1R485800AXXX Rectifier, 48 VDC, 5800 W

VertivCo.com | Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA
© 2017 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been
taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.

2017.03 2

You might also like