Setalux D A 870 Ba - en - A4

SETALUX® D A 870 BA
Technical Datasheet
TYPE USES

Polyisocyanate cross-linking Acrylic Resin Mainly in combination with aliphatic polyisocyanates to formulate two-
component polyurethane coatings with good light stability, chalking
Hydroxyl content: approx. 4.2% on solid resin resistance and gloss retention; particularly suitable for automotive
coatings.
FORM SUPPLIED PROPERTIES / APPLICATIONS

Approx. 70 % in butyl acetate Mainly in combination with aliphatic polyisocyanates for air- and forced-

drying automotive refinish and industrial coatings.
x The cured paint films are hard, tough but flexible, glossy and high-bodied
x with excellent weather stability and light-fastness and good resistance to
SPECIFICATION solvents and petrol.

Non-volatile content (1 g, 1 h, 125 °C): 70 ± 1 % x
DIN EN ISO 3251 x
SOLUBILITY / THINNABILITY

Viscosity (23 °C): 3500 ± 700 mPa·s
SETALUX D A 870 BA can be thinned to a solids content of 30 % with
DIN EN ISO 3219/A.3 ketones, esters, ether esters, toluene, xylene and solvent naphtha 100.
The storage stability of the respective solutions must be tested.
Acid value, supply form: 7.5 ± 1.5 mg KOH/g
Only PU grade solvents (< 0.05 % water, free of other reactive impurities)
DIN EN ISO 2114 should be used.
Hydroxyl content, supply form: 2.8 to 3.1 % The product is not compatible with aliphatic hydrocarbons.

DIN 53 240-2 x
x
Hazen colour value: ≤ 50 COMPATIBILITY

DIN EN 1557 SETALUX D A 870 BA can be mixed with Desmodur1 N 75, N 3390, N
3400, N 3600, Z 4470, L as well as SETALUX D A 365, A 450, A 565, A 665
Water content: ≤ 0.1 % and SETAL® D RD 181. It is generally miscible with most CAB grades.
However, the compatibility must be tested in each case.
DIN 51 777-1
x
x
x
STORAGE
OTHER DATA*
When stored in originally sealed containers at temperatures not
Equivalent weight, supply form: approx. 575 g/eq exceeding 30 °C, the product will remain stable for at least 730 days.

Density (20 °C): approx. 1.03 g/cm3 x
DIN EN ISO 2811-2 x
LABELING AND REACH APPLICATIONS

Flash point: approx. 25 °C
This product data sheet is only valid in conjunction with the latest
DIN EN ISO 1523 edition of the corresponding Safety Data Sheet. Any updating of safety-
relevant information – in accordance with statutory requirements – will

only be reflected in the Safety Data Sheet, copies of which will be revised
* These values provide general information and are not part of the and distributed. Information relating to the current classification and
product specification. labeling, applications and processing methods and further data relevant
to safety can be found in the currently valid Safety Data Sheet.

x
x
1
Covestro
2.0 / 09.06.2020 (replaces all previous versions) Worldwide Contact Info: www.allnex.com Page 1/1
Disclaimer: allnex Group companies ('allnex') exclude all liability with respect to the use made by anyone of the information contained herein. The information contained herein represents allnex's best
knowledge but does not constitute any express or implied guarantee or warranty as to the accuracy, the completeness or relevance of the data set out herein. Nothing contained herein shall be construed as
conferring any license or right under any patent or other intellectual property rights of allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee
or warranty is provided that the product and/or information is suitable for any specific use, performance or result. Any unauthorized use of the product or information may infringe the intellectual property
rights of allnex, including its patent rights. The user should perform his/her own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the
investigation of any possible violation of intellectual property rights or misappropriation of trade secrets of allnex and/or third parties remain the sole responsibility of the user.
Notice: Trademarks indicated with ® , TM or * as well as the allnex name and logo are registered, unregistered or pending trademarks of Allnex Netherlands B.V. or its directly or indirectly affiliated allnex Group
companies. ©2020 allnex Group. All Rights Reserved.

Setalux D A 870 Ba - en - A4

Uploaded by

Copyright:

Available Formats

Setalux D A 870 Ba - en - A4

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Setalux D A 870 Ba - en - A4

Uploaded by

Copyright:

Available Formats

SETALUX® D A 870 BA

FORM SUPPLIED PROPERTIES / APPLICATIONS

Hazen colour value: ≤ 50 COMPATIBILITY

You might also like