Rivulis Driplines
Rivulis Driplines
Rivulis Driplines
Drip Line
Extra redundancy: Tough cylindrical dripper with 2 water outlets in every dripper
www.rivulis.com
Rivulis Hydro PC / PCND Drip Lines
1
Multi-Zone
Inlet Filter
2
Unlike other emitters with just one outlet, if a Hydro Due to its unique cylindrical design,
PC Emitter outlet becomes blocked, a second outlet Hydro PC is built with a larger inlet filter than
on the Opposing side provides redundancy to the most competing drip lines.
emitter. An additional benefit of the dual outlets is
that it doesn’t matter what direction you lay the tube. Did you know the Rivulis Hydro PC
Dual outlets are standard in all Hydro PC has 600% more effective filtration
configurations with 15 cm and greater spacing. area than the leading competitor?
2
Pressure Compensated or Pressure
Compensated With No Drain: What To Use?
Flow-regulating diaphragm
Pressure Compensated (PC)
What Does It Do: Within a relatively large pressure range,
PC ensures the same flow per dripper regardless of what
the pressure is at that point of the tube. So the dripper at
lower elevation will emit the same amount of water as
the dripperat the highest point.
Where To Use: Undulating ground and long run lengths. Labyrinth Inlet filter
3
Rivulis Hydro PC Performance Data
Maximum Run Length x
Operating
Nominal Wall Internal Outside Flow Roll Spacing between Drippers (cm) on Flat Ground
Pressure
Ø Thickness Ø Ø Rate Length
Range
15 20 30 40 50 60 75 100
(mm) (mil) (mm) (mm) (mm) (l/h) (bar) (m) (m) (m) (m) (m) (m) (m) (m) (m)
12 35 0.89 10.4 12.2 0.75 - 3.0 59 76 109 138 166 192 229 284
1.05 600
12 40 1.02 10.4 12.4 0.75 - 3.5 63 82 117 149 179 206 246 306
16 35 0.89 13.8 15.6 0.6 - 3.0 90 117 166 211 253 292 347 431
16 40 1.02 13.8 15.8 1.2 0.6 - 3.5 400 97 125 178 227 272 314 374 464
16 45 1.14 13.8 16.1 0.6 - 3.5 97 125 178 227 272 314 374 464
17 40 1.02 15.3 17.3 0.6 - 3.5 122 157 222 281 336 386 458 565
17 45 1.14 15.3 17.6 1.2 0.6 - 3.5 350 122 157 222 281 336 386 458 565
17 47 1.19 15.3 17.7 0.6 - 3.5 122 157 222 281 336 386 458 565
20 40 1.02 17.6 19.6 0.75 - 3.5 160 206 289 364 434 499 590 727
20 45 1.14 17.6 19.9 1.2 0.75 - 3.5 300 160 206 289 364 434 499 590 727
20 47 1.19 17.6 20.0 0.75 - 3.5 160 206 289 364 434 499 590 727
16 35 0.89 13.8 15.6 0.75 - 3.0 75 97 137 175 210 242 288 358
16 40 1.02 13.8 15.8 1.6 0.75 - 3.5 400 80 104 148 188 226 260 310 385
16 45 1.14 13.8 16.1 0.75 - 3.5 80 104 148 188 226 260 310 385
17 40 1.02 15.3 17.3 0.75 - 3.5 101 130 184 233 278 320 380 470
17 45 1.14 15.3 17.6 1.6 0.75 - 3.5 350 101 130 184 233 278 320 380 470
17 47 1.19 15.3 17.7 0.75 - 3.5 101 130 184 233 278 320 380 470
20 40 1.02 17.6 19.6 0.75 - 3.5 133 170 240 302 360 415 490 604
20 45 1.14 17.6 19.9 1.6 0.75 - 3.5 300 133 170 240 302 360 415 490 604
20 47 1.19 17.6 20.0 0.75 - 3.5 133 170 240 302 360 415 490 604
16 35 0.89 13.8 15.6 0.75 - 3.0 61 78 112 142 171 197 234 291
16 40 1.02 13.8 15.8 2.2 0.75 - 3.5 400 65 84 120 153 183 212 252 313
16 45 1.14 13.8 16.1 0.75 - 3.5 65 84 120 153 183 212 252 313
17 40 1.02 15.3 17.3 0.75 - 3.5 82 106 149 190 227 261 309 382
17 45 1.14 15.3 17.6 2.2 0.75 - 3.5 350 82 106 149 190 227 261 309 382
17 47 1.19 15.3 17.7 0.75 - 3.5 82 106 149 190 227 261 309 382
20 40 1.02 17.6 19.6 0.75 - 3.5 108 138 195 246 293 337 398 492
20 45 1.14 17.6 19.9 2.2 0.75 - 3.5 300 108 138 195 246 293 337 398 492
20 47 1.19 17.6 20.0 0.75 - 3.5 108 138 195 246 293 337 398 492
16 35 0.89 13.8 15.6 0.75 - 3.0 44 57 81 103 124 143 171 212
16 40 1.02 13.8 15.8 3.6 0.75 - 3.5 400 47 61 87 110 133 154 184 228
16 45 1.14 13.8 16.1 0.75 - 3.5 47 61 87 110 133 154 184 228
17 40 1.02 15.3 17.3 0.75 - 3.5 59 77 108 138 165 190 224 279
17 45 1.14 15.3 17.6 3.6 0.75 - 3.5 350 59 77 108 138 165 190 224 279
17 47 1.19 15.3 17.7 0.75 - 3.5 59 77 108 138 165 190 224 279
20 40 1.02 17.6 19.6 0.75 - 3.5 78 100 141 179 213 245 290 358
20 45 1.14 17.6 19.9 3.6 0.75 - 3.5 300 78 100 141 179 213 245 290 358
20 47 1.19 17.6 20.0 0.75 - 3.5 78 100 141 179 213 245 290 358
4
Rivulis Hydro PCND Performance Data
Operating Maximum Run Length x
Nominal Wall Internal Outside Flow Roll Spacing between Drippers (cm) on Flat Ground
Pressure
Ø Thickness Ø Ø Rate Length
Range 15 20 30 40 50 60 75 100
(mm) (mil) (mm) (mm) (mm) (l/h) (bar) (m) (m) (m) (m) (m) (m) (m) (m) (m)
12 35 0.89 10.4 12.2 0.75 - 3.0 59 76 109 138 166 192 229 284
1.05 600
12 40 1.02 10.4 12.4 0.75 - 3.5 63 82 117 149 179 206 246 306
16 35 0.89 13.8 15.6 0.6 - 3.0 84 108 154 195 234 271 322 399
16 40 1.02 13.8 15.8 1.35 0.6 - 3.5 400 90 116 165 210 252 291 347 430
16 45 1.14 13.8 16.1 0.6 - 3.5 90 116 165 210 252 291 347 430
17 40 1.02 15.3 17.3 0.6 - 3.5 113 146 206 260 311 358 424 523
17 45 1.14 15.3 17.6 1.35 0.6 - 3.5 350 113 146 206 260 311 358 424 523
17 47 1.19 15.3 17.7 0.6 - 3.5 113 146 206 260 311 358 424 523
20 45 1.14 17.6 19.9 0.75 - 3.5 160 206 289 364 434 499 590 727
1.2 300
20 47 1.19 17.6 20.0 0.75 - 3.5 160 206 289 364 434 499 590 727
16 35 0.89 13.8 15.6 0.75 - 3.0 70 91 130 165 198 229 272 338
16 40 1.02 13.8 15.8 1.75 0.75 - 3.5 400 76 98 139 177 213 246 293 363
16 45 1.14 13.8 16.1 0.75 - 3.5 76 98 139 177 213 246 293 363
17 40 1.02 15.3 17.3 0.75 - 3.5 101 130 184 233 278 320 380 470
17 45 1.14 15.3 17.6 1.6 0.75 - 3.5 350 101 130 184 233 278 320 380 470
17 47 1.19 15.3 17.7 0.75 - 3.5 101 130 184 233 278 320 380 470
20 45 1.14 17.6 19.9 0.75 - 3.5 125 160 226 285 340 391 462 570
1.75 300
20 47 1.19 17.6 20.0 0.75 - 3.5 125 160 226 285 340 391 462 570
16 35 0.89 13.8 15.6 0.75 - 3.0 58 75 107 136 163 189 224 279
16 40 1.02 13.8 15.8 2.35 0.75 - 3.5 400 62 81 115 146 176 203 242 300
16 45 1.14 13.8 16.1 0.75 - 3.5 62 81 115 146 176 203 242 300
17 40 1.02 15.3 17.3 0.75 - 3.5 79 101 143 182 217 250 296 366
17 45 1.14 15.3 17.6 2.35 0.75 - 3.5 350 79 101 143 182 217 250 296 366
17 47 1.19 15.3 17.7 0.75 - 3.5 79 101 143 182 217 250 296 366
20 45 1.14 17.6 19.9 0.75 - 3.5 103 132 187 236 281 323 382 472
2.35 300
20 47 1.19 17.6 20.0 0.75 - 3.5 103 132 187 236 281 323 382 472
16 35 0.89 13.8 15.6 0.75 - 3.0 43 55 79 100 121 140 167 207
16 40 1.02 13.8 15.8 3.75 0.75 - 3.5 400 46 59 84 108 130 150 179 222
16 45 1.14 13.8 16.1 0.75 - 3.5 46 59 84 108 130 150 179 222
17 40 1.02 15.3 17.3 0.75 - 3.5 79 101 143 182 217 250 296 366
17 45 1.14 15.3 17.6 3.75 0.75 - 3.5 350 79 101 143 182 217 250 296 366
17 47 1.19 15.3 17.7 0.75 - 3.5 79 101 143 182 217 250 296 366
20 45 1.14 17.6 19.9 0.75 - 3.5 78 100 141 179 213 245 290 358
3.6 300
20 47 1.19 17.6 20.0 0.75 - 3.5 78 100 141 179 213 245 290 358
5
6
7
HYDRO PC / PCND
Drip Line
“We have over 1.2 million metres of Rivulis Hydro PC drip line that was installed in our almond
crop seven years ago. The emitters are still performing like the day they were first installed”
Tim Orr,
Lake Cullulleraine, Australia
Case study outcomes are for information purposes only and actual results may vary. This literature has been compiled for
worldwide circulation and the descriptions, photos, and information are for general purpose use only. Please consult with an
irrigation specialist and technical specifcations for proper use of Rivulis products. Because some products are not available in all
regions, please contact your local dealer for details. Rivulis reserves the right to change specifications and the design of all products
without notice. Every effort has been used to ensure that product information, including data sheets, schematics, manuals and
brochures are correct. However information should be verified before making any decisions based on this information.
www.rivulis.com