Catalogo Enduro
Catalogo Enduro
Catalogo Enduro
mx
w w w. e n d u r o c o m p o s i t e s . c o m
Enduro
C O M P O S I T E S
A DIVISION OF ENDURO SYSTEMS, INC.
F I B E RG L A S S C A B L E T R AY S Y S T E M S
Instrumentation Tray Wireway Strut Systems Instrument Stands Third Rail Coverboard
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
ENDURO CABLE
T R AY S Y S T E M S
Enduro Systems, Inc. is the world’s leader in fiberglass cable
tray and related products. This catalog includes the products,
accessories and engineering data required to design and install
a complete non-metallic cable tray system.
The main components of the cable tray are produced utilizing the pultrusion
process. Over twenty years ago, Enduro Systems, Inc. invested in its first
pultrusion equipment. This was necessary to reduce costs and perfect the
components for optimum cable tray performance.
As the technology improved, and the demand for fiberglass cable trays increased,
Enduro Systems, Inc. became a major manufacturer in the world wide cable
tray market. The optimization of the fiberglass cable tray components provided
Enduro with technology which developed into custom shapes.
Today, Enduro is recognized as one of the leaders in the pultrusion industry with
multiple production lines in operation and more planned.
In addition to pultrusion, Enduro’s capabilities include compression molding and
resin transfer molding. These processes provide in-house production capabilities
for all of the components in the cable tray system.The full radius one-piece mold-
ed fitting with its light weight and
smooth side walls has been universally
accepted as the best cable tray fitting.
Enduro Fiberglass Systems’ engineers
and technical staff have implemented
comprehensive SQC/SPC programs to
continually provide the best possible
products for our customers. They also
have incorporated computer aided
design systems to analyze structural and
mechanical characteristics of the cable
tray system.
The manufacturing, fabrication, engineering and sales personnel at Enduro are
all committed to the common goal of providing our customers with the highest
quality, most cost effective non-metallic cable tray in the world.
Enduro
C O M P O S I T E S
A DIVISION OF ENDURO SYSTEMS, INC.
1.800.231.7271 • www.endurocomposites.com
U.S.A. Headquarters: Asia Pacific Office:
7100 Old Katy Rd. • Houston, TX 77024 Singapore
✆ 713.358.4000 • 713.358.4100 ✆ 65.98.292.076 • 65.64.672.659
sales@endurosys.com asiapacific@endurosys.com
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
T
A
B
TABLE OF CONTENTS L
E
O
F
C
O
N
T
E
N
T
S
3
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
S ■ FEATURES &
Y ✔ BENEFITS
S
T
E ■ Full Integration
M ✔ Quality Control and Delivery
O ■ UL Listed & CSA Approved
V ✔ Meet Tighter End User Specs Channel Type
E Instrumentation Tray and
R ■ Corrosion Resistant Inside and Outside
Fittings
V 90° Vertical Molded
✔ No Rust, Peeling, or Flaking Radius Bends
Pages 34-35
I
E ■ Easy to Cut and Install Page 16
Pushbutton
Enduro T
E
M
Cable
Support Stands O
Page 50
V
E
R
Flat Cover V
Page 27
Tray I
E
W
Straight Sections
Pages 13-15
Splice Plates
Page 30
5
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
T
E
C
TECHNICAL DATA
H
N
I The following data was obtained from the NEMA and NEC Standards Publications and
C
A other sources to assist in the proper selection of the most appropriate cable tray type offered
L by ENDURO SYSTEMS, INC.
D
A STANDARD PUBLICATIONS
T
A NEC (National Electric Code) STANDARDS – Article 318 (current issue applicable sections only)
NEMA (National Electric Manufacturers Association) STANDARDS FOR CABLE TRAY SYSTEMS – FG-1 (current issue)
UL (Underwriters Laboratories, Inc.) STANDARDS FOR NON-METALLIC CABLE TRAY.
CSA INTERNATIONAL (National Standard of Canada) CAN/CSA-C22.2 No. 126 CABLE TRAY SYSTEMS
Note: Values shown are also applicable to vinyl ester resin where available.
* Designates a minimum safety factor of 2.0. • ** U.L. Listed • *** C.S.A. Listed
Contact Enduro for Working Load Capacities for Low Smoke / Non-Toxic Resin Cable Tray systems.
Such concentrated static load represents a static This combined load may be used to select
weight applied between the side rails at midspan. a suitable load/span designation. (Table 1)
When so specified, the concentrated static load may If the combined load exceeds the working load shown,
be converted to an equivalent load (We ) in pounds the manufacturer should be consulted.
per linear foot (kg/m) using the formula:
6
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
WEIGHT/FOOT STRAIGHT SECTIONS Table 2 -Vinyl Ester Resin weights are the same as Polyester.
T
E
Catalog Number
C
H
General EHL3- ELL4-EHL4 ELL6- EIL6 D-EHL6- D-EHL8- D-EHL10- N
Number W-R-L W-R-L W-R-L EHL6-W-R-L W-R-L W-R-L W-R-L I
WR Lbs./Ft. Lbs./Ft. Lbs./Ft. Lbs./Ft. Lbs./Ft. Lbs./Ft. Lbs./Ft. C
SS-06-06 2.0 2.5 3.3 3.8 4.5 5.5 9.2 A
SS-06-09 1.8 2.3 3.0 3.6 4.3 5.3 9.0 L
SS-06-12 1.7 2.2 2.9 3.5 4.2 5.3 8.9
D
SS-06-18 1.6 2.1 2.8 3.4 4.1 5.2 8.9 A
T
SS-09-06 2.3 2.8 3.5 4.1 4.7 5.8 9.5
A
SS-09-09 1.9 2.5 3.2 3.8 4.4 5.5 9.2
SS-09-12 1.8 2.3 3.1 3.6 4.3 5.4 9.1
SS-09-18 1.7 2.2 2.9 3.5 4.2 5.3 8.9
Strength properties of Temperatures Polyester Resin Vinyl Ester Resin Note: Percentages shown are approximate.
reinforced plastics are in Degrees °F % of Strength % of Strength If unusual temperature conditions exist, the
reduced when contin- 75 100 100 manufacturer should be consulted. Below freezing
uously exposed to ele- 100 90 100 temperatures do not adversely affect the load rat-
vated temperatures. 125 78 100 ing capability of the tray. Fiberglass does not
Working loads shall be 150 68 90 become brittle at below freezing temperatures.
reduced when based 175 60 90 Careful review should be made of applications
on the following: 200 52 75 involving service temperatures over 200°F.
The test values in the following chart were obtained from tests conducted by Enduro’s vinyl ester resin supplier. The values shown,
although obtained from an actual coupon test, are intended for illustrative purposes only, and not for use in design calculations.
The values for polyester are slightly lower.
7
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Two standard composite resin systems are available. For most applications, isophthalic polyester fire-retardant (FR–P) is the more
widely used. A vinyl ester composite fire-retardant resin system (FR–VE) is recommended where strong acids (such as hydrochloric
acid), strong alkalies (such as caustic soda), organic solvents and halogenated organic conditions exist. An abbreviated Guide is
provided below to assist in the selection of the proper resin system for individual application.
All composite material has an ultra-violet light inhibiting chemical additive and has a maximum flame spread of 25 or less, per
ASTM E-84 (Class 1 flame spread). All pultruded products have complete Nexus Veil Coverage (outer surfacing fabric) to provide
maximum chemical and UV protection.
FR = Fire-Retardant P = Polyester Resin VE = Vinyl Ester Resin (*) = Not recommended to exceed this temperature Call = Call for recommendations
Information contained in this chart is based on data from raw material suppliers and collected from several years of actual industrial applications • Temperatures are
not the minimum nor the maximum (except where specifically stated) but represent standard test conditions • The products may be suitable at higher temperatures,
but individual test data should be required to establish such suitability • The recommendations or suggestions contained in this chart are made without guarantee or
representation as to results • We suggest that you evaluate these recommendations and suggestions in your own laboratory or by actual field trial prior to use.
8
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Thread shear strength using fiberglass nut in tensile – Lbs. 1,250 2,200 3,100 4,500 6,500
Transverse shear on threaded rod
– double shear (load Lb.) (ASTM-B565) 3,000 5,000 7,500 12,000 22,000
Transverse shear on threaded rod
– single shear (load Lb.) 1,600 2,600 3,800 6,200 15,000
Compressive strength longitudinal, PSI (ASTM-D695) 54,000 54,000 54,000 54,000 65,000
Flexural strength, PSI (ASTM-D790) 55,000 55,000 55,000 55,000 60,000
Flexural modulus, PSI x 106 (ASTM-D790) 2.0 2.0 2.0 2.50 2.75
Torque strength using fiberglass nut lubricated
with SAE 10W30 motor oil, Ft.-Lbs. 8 18 35 50 110
Dielectric strength, KV/In. (ASTM-D149) 35 35 35 35 35
Water absorption 24 hour immersion
– threaded, % (ASTM-D570) 1 1 1 1 1
Coefficient of thermal expansion – longitudinal In./In./°F 5 x 10-6 5 x 10-6 5 x 10-6 5 x 10-6 5 x 10-6
Max recommended operation temp – based on 50%
retention of ultimate thread shear strength °F 200 200 200 200 200
Stud weight, Lb./Ft. 0.07 0.12 0.18 0.28 0.50
Flammability Self-extinguishing on all.
Note: 1 Ft.-Lb. = .138 kg-M; 1 Lb = .4536 kg, 1 PSI = 6.984 K Pa
The following applies to Tables 9 and 10
1. Refer to Table 9 (FR-VE Resin) for fire retardant properties of threaded rod.
2. Test results are for studs with single nuts only. Proper safety factors should be applied to testing.
3. All values are based on laboratory test results.
9
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
T
E
C
INSTALLATION GUIDE
H
N
I
C
A
L
D
A
T
A
10
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
SUPPORT LOCATIONS – CABLE TRAY & FITTINGS Reference: NEMA FG-1 (current issue) T
E
Straight Sections C
LENGTH OF SPAN = L H
Supports must be located so that connec- SPLICE AT
IN MULTIPLE SPAN CONDITION
SPLICE AT N
L/4 L/4
tors (splice joints) between horizontal runs I
fall between the support point and the C
quarter point of the span. A
SUPPORT SUPPORT
L
D
Standard engineering practice requires that the splice joints be independently of each other and excessive stress will occur at sub- A
T
located where they will resist little or no bending moment. This stantially less loading. A
allows the cable tray system to act as a continuous member with
Vertical straight lengths should be supported at intervals dictated
spans working in conjunction with one another to resist loading.
by the building structure not exceeding 24 Ft. on centers.
When a cable tray system is installed with the splice joints located
directly over the support, the previous continuous span condition A support should be located 2 Ft. on each side of an expansion
is changed to one of a number of simple spans. These spans act connection.
Ø
(.61 m)
1 Ø
Ø 30°, 45°, 90°
2'-0" MAX 2
(.61 m)
2/ R
3
2'-0" MAX
2'-0" MAX
2'-0" MAX
TYP
TYP TYP
(.61 m) (.61 m)
(.61 m)
(.61 m) (.61 m)
TYP
11
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
12
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
STRAIGHT SECTIONS S
T
R
A
I
Typical “[” Shaped Cable Tray G
H
T
S
E
C
CATALOG NUMBERING SYSTEM T
I
The following information will help you order straight sections for your application. Refer to Table 1 in Technical Data section for O
Working Allowable Load Capacity. All cable trays are available in polyester and vinyl ester resin. See page 8 to determine resin system N
required. Cable trays requiring a 2.0 safety factor will be designated with a “D” prefix. See page 6, Table 1. S
Combine all four specification numbers to create the correct catalog number..
Side View
OFFSHORE MARINE RUNG Conforms to Coast Guard and ABS Requirements for Stainless Steel Banding
23/4" (70)
of Cables. Allows bands or tie wraps to be installed perpendicular to the cable 1" (25) 13/4"
(44)
avoiding damage to the cable jacket. Closed slot prevents bands from slipping
off rung. Provides a 21/2" cable support surface. Available for easy field instal-
lation on existing Enduro cable tray or for factory installation.To order prein- 1/4" (6)
stalled Marine Rung add MR to the end of the original tray part number
indicating the location(s) of the rung. Offshore Marine Rung will be the same
resin as the tray unless otherwise specified, as listed in the example below. 11/4" (32)
C S A I N T E R N AT I O N A L
* The Enduro straight sections listed above are UL Listed for 10 Ft. and 20 Ft. Lengths. All molded and
mitered fittings associated with these trays are also UL Listed.
13
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
LOADING DEPTH
LOADING DEPTH
I Class Class
113/16" (46mm)
213/16" (71mm)
G 8A/SF 1.5 Min. 12A/SF 1.5 Min.
H
4" (102mm)
3" (76mm)
HEIGHT
HEIGHT
T Max. Span Max. Span
Support Support
S
E 8 Ft. (2.4m) 12 Ft. (3.6m)
C
T Resin System Resin System
I Polyester 1" Polyester 1"
O (25mm) (25mm)
N
S 1/4" (6mm) 1/4" (6mm)
LOADING DEPTH
LOADING DEPTH
Class
413/16" (122mm)
Class
20A/SF 2.0 Min.
23/4" (70mm)
HEIGHT
HEIGHT
1/4" (6mm)
1/4" (6mm)
15/8"
Tray Type 2" Tray Type (41mm)
EMZ6 (51mm)
EIL6
LOADING DEPTH
LOADING DEPTH
43/4" (121mm)
Class Class
43/16" (106 mm)
HEIGHT
HEIGHT
14
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
LOADING DEPTH
A
LOADING DEPTH
Class Class
411/16" (119mm)
I
43/4" (121mm)
20C/SF 1.5 Min. 20C/SF 2.0 Min. G
6" (152mm) H
6" (152mm)
HEIGHT
HEIGHT
Max. Span Max. Span T
Support Support
20 Ft. (6m) S
20 Ft. (6m) E
C
Resin System Resin System T
Polyester 1" Polyester 1" I
(25mm) (25mm) O
N
1/4" (6mm) 1/4 " (6mm) S
LOADING DEPTH
Class Class
611/16" (170mm)
611/16" (170mm)
20C/SF 1.5 Min. 20C/SF
2.0 Min.
8" (203mm)
8" (203mm)
HEIGHT
HEIGHT
Max. Span
Support Max. Span
20 Ft. (6m) Support
20 Ft. (6m)
Resin System
Polyester 1" Resin System 1"
(25mm) (25mm)
Polyester
1/4" (6mm) 1/4" (6mm)
10" fittings
HEIGHT
Resin System
Polyester 1"
(25mm)
1/4" (6mm)
15
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
COVERS: When ordering covers for fittings, use the DIVIDERS: To order fitting with a pre-installed STRUT RUNG / OFFSHORE MARINE RUNG:
prefix “EC” before the catalog number. Note: Fasteners divider, add the letters “EDS” after the catalog Special rungs are available for your cable
for covers are separate order items – see page 27. number. Please indicate positioning of divider. tray system. See page 13 for information.
Example: EC–EHB–MC6–90–24–24 Example: EHB–MC6–90–24–24–EDS
Underwriters
The following Enduro Molded Fitting Types are UL Listed: EHB • EIV • EOV • EHAB • EIVD • EOVD • EHBD • ESR
® Laboratories, Inc. EL • ER • EHT • EHC in 4", 6", and 8" Polyester and Vinyl Ester Tray.
90° VERTICAL MOLDED RADIUS BEND 90° HORIZONTAL MOLDED RADIUS BEND
Typical Catalog No:
EHB–(RD)–90–(W)–(R)
Inside
R
Typical Catalog No: * Also available in 4" and
A EIV–(RD)–90–(W)–(R) 8" side rail configuration.
L
W
** Also available in 4" side
rail configuration.
L
A
† Also available in 8" side
rail configuration.
R
W A
45°
5"
Channel Depth In. (mm)
4" Tray 6" Tray 8" Tray A
A
Radius A L A L A L
45° 5"
12 NA NA 13 211/16
(305) (330) (535) NA NA
5" R
24 161/2 299/16 181/2 3015/16
(610) NA NA (419) (751) (470) (786) R L
36 NA NA NA NA NA NA
(914)
Outside Typical Catalog No: Inside Typical Catalog No:
EOV–(RD)–45–(W)–(R) EIV–(RD)–45–(W)–(R)
X
17
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
24 3 /16
M R=24"
O 5
L R=24"
6
D
E
D 5 30°
1111/16 1111/16
30°
F 5
I
T 6
T 5 R=24"
I R=24"
N 24 3 /16
G
S
Outside Available in 6" and Inside
Typical Catalog No: 24" radius depth Typical Catalog No:
EOV–(MC6)–30-(W)–24 channel. EIV–(MC6)–30-(W)–24
X = 2L – 3"
JOINING 30° IV & 30° OV MOLDED Y = 2 A – 5.20"
Y
Outside Inside
Typical Catalog No: EOVA–(RD)–45–(W)–(R) Typical Catalog No: EIVA–(RD)–45–(W)–(R)
11" L
45°
R
11"
A 11" A
R
45°
L 11"
Dimension In (mm)
Radius A L A
12 223/4 391/2 R R
(305) (578) (1003)
24 343/4 * 631/2
(610) (883) (1613)
36 463/4 871/2
(914) (1187) (2223)
* Available in 4", 6" and 8".
Note: Also available tap up.
Please specify when ordering. Tap Down
19
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Outside
Typical Catalog No:
R EOV–(RD)–90–(W)–(R)
A
R
R
L
Inside R
Typical Catalog No:
EIV–(RD)–90–(W)–(R)
A
Note: On all illustrations
(W) = Width of the
inside distance from
20 tray wall to tray wall.
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
W
L
Outside
A Typical Catalog No:
EOV–(RD)–45–(W)–R
Dimension In. (mm) A
24" (610) Radius 36" (914) Radius
Width A L A L
R
6 (152) 159/16 (395) 261/2 (673) 191/8 (486) 35 (889) R
9 (229) – – – –
12 (305) 219/16 (548) 303/4 (781) 251/8 (638) 393/4 (1010)
A
18 (457) 279/16 (700) 35 (889) – –
24 (610) 339/16 (852) 391/4 (997) 373/8 (475) 473/4 (1213)
Inside
30 (762) 399/16 (1005) 431/2 (1105) – – Typical Catalog No:
36 (914) 459/16 (1157) 473/4 (1213) 491/8 (1248) 563/16 (1427)
EIV–(RD)–45–(W)–R
L
90° VERTICAL SEGMENTED MOLDED RADIUS TEE-UP Typical Catalog No: EVT–(RD)–90–(W)–(R) TAP UP
MITERED FITTINGS
Pre-assembled “mitered” fittings are available for all tray types. Please contact factory for details on 10" mitered fittings.
All fittings are assembled using 316 Stainless Steel fasteners unless otherwise specified. It is recommended that expansion connector
plates be used when connecting to molded fittings or straight sections. Rung connections are made with a mechanical and/or chemical
lock. (See specification pg. 12, item 5.2.4 for details.) Other sizes and widths available – please contact factory.
M
Typical Catalog Number: EHB - HL - 6 - 90 - 24 - 24
I
T
E
Fitting Designation Type of Curve / Resin Designation (RD) Tray Depth Angle Width Radius R
HOW TO ORDER/ EHB Horizontal Bend LL Mitered / Polyester E
3 30 6 12
CATALOG NUMBERING EIV Vertical Inside LV Mitered / Vinyl Ester 4 45 9 24 D
SYSTEM EOV Vertical Outside LY Mitered / Low-Smoke-Non-Toxic 6 60 12 36
EHT Horizontal Tee IL Mitered / Polyester 8 90 18 F
EHC Horizontal Cross IV Mitered / Vinyl Ester 10 24 I
EVT Vertical Tee* IY Mitered / Low-Smoke-Non-Toxic 30 T
ER Right Reducer HL Mitered / Polyester 36 T
EL Left Reducer HV Mitered / Vinyl Ester I
ESR Straight Reducer HY Mitered / Low-Smoke-Non-Toxic N
EHBD Horz. Direct Bend MZ Mitered / Polyester G
VZ Mitered / Vinyl Ester S
* For vertical tee specify vertical
tee up or down. YZ Mitered / Low-Smoke-Non-Toxic
COVERS: When ordering covers for fittings, use the DIVIDERS: To order fitting with a pre-installed STRUT RUNG / OFFSHORE MARINE RUNG:
prefix “EC” before the catalog number. Note: Fasteners divider, add the letters “EDS” after the catalog Special rungs are available for your cable
for covers are separate order items – see page 27. number. Please indicate positioning of divider. tray system. See page 33 for information.
Example: EC–EHB–LL4–90–24–24 Example: EHB–LL4–90–24–24–EDS
Underwriters
The following Enduro Mitered Fitting Types are UL Listed and CSA Approved:
® Laboratories, Inc.
CSA INTERNATIONAL
EHB • EIV • EOV • EIVA • EOVA • EHT • EHC • EVT in 4", 6", and 8" Polyester and Vinyl Ester Tray.
M
I A
T W
m .
in
)
m
(3 3.5
E
1
Ø
43
R
E 15 in.
L
R (381 mm)
D
L
F Angle Ø
I 30° Angle 45° Angle
T R Dim. Depth* Depth*
T In. 4" 6" 8" 4" 6" 8"
I (mm)
N A 103/16 1115/16 1311/16 123/8 1313/16 153/16
(259) (303) (348) (314) (351) (386)
G
S L 2611/16 2611/16 2611/16 249/16 249/16 249/16
(678) (678) (678) (624) (624) (624)
Ø
)
16
6 (152) 13 (330)
9 (229) 16 (406)
12 (305) 19 (483)
18 (457) 25 (635)
A
24 (610) 31 (787)
30 (762) 37 (940)
36 (914) 43 (1092)
"
W 1'-4
40 6)
( W
A Note: On all illustrations
(W) = Width of the
inside distance from
tray wall to tray wall.
24
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
R
12" Radius 24" Radius 36" Radius
Dim.
In. Depth Depth Depth
(mm) 3" 4" 6" 8" 3" 4" 6" 8" 3" 4" 6" 8"
8 9 10 12 9 10 12 14 11 12 14 15
M
A A (203) (229) (254) (305) (229) (254) (305) (356) (279) (305) (356) (381) I
30°
18 18 18 18 24 24 24 24 30 30 30 30 T
W L (457) (457) (457) (457) (610) (610) (610) (610) (762) (762) (762) (762) E
111/16 121/2 137/8 149/16 16 177/16 181/8 191/2 2015/16 R
A * (281) (318) (352) * (370) (406) (443) * (470) (495) (532) E
L
45° D
L * 197/8 197/8 197/8 * 283/8 283/8 283/8 * 367/8 367/8 367/8
* Contact factory for availability of 3" (76mm). (505) (505) (505) (721) (721) (721) (937) (937) (937)
F
I
30°/45° OUTSIDE VERTICAL RADIUS BEND T
T
Typical Catalog No: EOV–(TD)–45–(W)–(R) I
Note: All dimensions are to the nearest 1/4". L
N
12" Radius 24" Radius 36" Radius G
Dim. Depth Depth Depth S
In.
(mm) 3" 4" 6" 8" 3" 4" 6" 8" 3" 4" 6" 8"
7 8 10 10 9 10 12 12 11 12 14 14
A (178) (203) (254) (254) (229) (254) (305) (305) (279) (305) (356) (356)
30°
17 17 18 18 23 23 24 24 29 29 30 30 A
L (432) (432) (457) (457) (584) (584) (610) (610) (737) (737) (762) (762)
R
103/4 123/4 143/4 145/16 165/16 185/16 1713/16 1913/16 2113/16
A * (273) (324) (375) * (364) (414) (465) * (452) (503) (554)
45°
* 193/16 209/16 22 * 2711/16 291/16 301/2 * 361/8 379/16 39 W
L (487) (522) (559) (703) (738) (775) (918) (954) (991)
W
A
90° INSIDE VERTICAL RADIUS BEND
Typical Catalog No: EIV–(TD)–90–(W)–(R)
26
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
PEAKED COVER
11.25° H
27
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
3/8''- 16 FRP
Resin Designation:
THREADED ROD TRAY
DEPTH
P = Polyester
V = Vinyl Ester
Catalog Number
1'' SQ. RUNG CCHD - (Tray Depth)(Resin Designation) x (W)
28
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
* See drawing page 31. ** Contact factory for availability. For 6" & 8" channel heavy duty splice plate, please see page 31.
ASSEMBLY FASTENERS
Type Set Includes Size For Use With Tray Types Catalog No.
316 Stainless Steel Bolt Set Bolt, nut, 2 flat washers, 1 lock washer 3/8"-16 x 11/4" All tray types (except 10" Channel*) 505167SS
316 Stainless Steel Bolt Set Bolt, nut, 2 flat washers, 1 lock washer 3/8"-16 x 11/2" All tray types (except 10" Channel*) 505168SS
Monel Bolt Set Bolt, nut, 2 flat washers, 1 lock washer 3/8"-16 x 11/4" All tray types (except 10" Channel*) 606167M
FRP Studs & Nuts Stud and 2 nuts 3/8"-16 x 2" ELL3, ELL4, ELL6, EIL6, EMZ6 707166F
FRP Studs & Nuts Stud and 2 nuts 3/8"-16 x 21/2" EHL6, EHL8, EHV6 707167F
Silicon Bronze Bolt Set Bolt, nut, 2 flat washers, 1 lock washer 3/8"-16 x 11/4" All tray types (except 10" Channel*) 808167SB
Note: It is recommended that expansion connector plates and 11/4" long assembly fasteners be used when connecting mitered fittings to
molded fittings or straight lengths.
* Contact factory for hardware.
29
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
B C
11/4"
(32)
30° 22.5°
21/8"
57/16" (54)
(138)
57/16"
(138)
B
A
C
7/16" (11)
Hole
30
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
7/16" x 1"
6"
(152) (11 x 25) 1"
Slot, Typ. 51/16" (25)
(129)
1"
(25)
45/8" 25/8"
(117) (67)
S
P
L
63/8" 21/8"
(162) (54)
I
C
E
Typical Dimensions
P
Note: For Vertical Adjustable Plates use Catalog No. 505168SS hardware L
A
HEAVY DUTY SPLICE PLATE T
E
S
C8 x 13/4" x 5/16"
31
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Riveted
For securing riveted divider
to tray we use 3/16" SS rivets. Tray Type Catalog No.
We also have available
thermoplastic drive rivets Polyester EDS-P Refer to
C the Fitting
A (see below, right) which Vinyl Ester EDS-V
require field drilling. Section for
B Low Smoke / Non-Toxic EDS-Y
L ordering
E factory
Adjustable For “ ” Side Rail (Polyester) ADC-1P*
installed
T For “ ” Side Rail (Vinyl Ester) ADC-1V* dividers for
R For “ ” Side Rail (Low Smoke / Non-Toxic) ADC-1Y* pre-assembled
A fittings.
Y For “ ” Side Rail ADC-2P
* Available for 3",4", 6", 8" only.
A
C
C This Guide becomes a clamp with use of a 316 SS set screw on top.*
E BEAM HOLD DOWN GUIDE NYLON THERMOPLASTIC DRIVE RIVET
S
S Saves $$ on Labor! NEW! For securing
O A Stainless Steel Guide that secures cover
R the position of Cable Tray on a support rack material
I and divider
E or structure. This Guide eliminates the need
S to drill or punch holes while allowing for strip.
normal expansion. Guide is easily adaptable Pigmented Tray Type Catalog No.
for right or left sided installations. to match
Polyester R-25-P
resin type.
* Please add “316” to part number R-25-V
Part No: BCHDG-MP-CP BCHDG-MP-LV Vinyl Ester
to include one 316 SS Set Screw.
32
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
C
For Vinyl Ester Resin substitute “V” for “P”. Fasteners not included. A
HOLD DOWN CLIP & EXPANSION GUIDE B
For Low Smoke / Non-Toxic Resin add “Y” for “P”.
L
E
Tray Designation Part Number Dimension A Dimension B
7/16"x 7/8" T
Slot
ELL/EMZ6 XHDC-LP * 1/4 (6.4) 1/2 (12.7) A
B 3/4" (19) R
ELL/EIL/EHL XHDC-HP† 5/16 (7.9) 19/32 (15.1) A
3/8 (9.5) 11/16 (17.5) 13/4 (4.45)
CL Y
D-EHL XHDC-DP† 31/4 (82.6)
3/4 (20.6)
D-EHL 10 XHDC-10P *† 1/2 (12.7) A
C
* These parts do not have the 7/16" x 7/8" slot. They have a 7/16" diameter hole located 7/8" from the outer edge instead of 3/4". C
† This part will allow a 3/16" expansion movement. To reduce expansion, please contact factory. E
S
S
O
FIELD INSTALL RUNG R
Enduro Stut Rung I
To order, create the following part number: E
Standard Cable Tray Rung EFSR - (Tray Width) - (PE or VE) S
To order, create the
following part number: Example for
EFIR - (Tray Width) - (PE or VE) 6" Wide Rung,
Polyester Resin:
Example for 6" Wide Rung, Polyester Resin: EFIR-06-PE EFSR-06-PE
Hardware not included.
Hardware not included.
• Seals exposed fibers after any field cuts. Fiberglass to Fiberglass adhesive
• Restores gloss and luster to weathered fiberglass. for custom fabrication or repair.
• Seals exposed FRP threads after installation Meets NSTA
of DuroThread™ fiberglass threaded rod and hex nuts. and UPS
• For Polyester and Vinyl Ester resin products. requirements
• Clear color. for sea and
Meets NSTA and UPS requirements for sea and ground
ground transportation. transportation.
33
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
90°
R
R 90°
R R
R
90°
R
A A
90° VERTICAL INSIDE MOLDED 90° VERTICAL OUTSIDE MOLDED 90° HORIZONTAL MOLDED
Radius “A” Radius “A” Radius “A”
In. (mm) Catalog No. In. (mm) In. (mm) Catalog No. In. (mm) In. (mm) Catalog No. In. (mm)
18" (457) EIS-MC90IV-18-600 223/4 (578) 12" (305) EIS-MC90OV-12-600 161/4 (413) 12" (305) EIS-MC90HB-12-600 223/4 (578)
24" (610) EIS-MC90IV-24-400 2811/16 (729) 24" (610) EIS-MC90OV-24-400 285/16 (719) 24" (610) EIS-MC90HB-24-400 3213/16 (833)
EIS-MC90IV-24-600 283/4 (730) EIS-MC90OV-24-600 281/4 (718) EIS-MC90HB-24-600 343/4 (883)
EIS-MC90OV-24-800 283/16 (716) EIS-MC90HB-24-800 3611/16 (932)
34
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
45° R
A
45°
10" 22°–30' R
R R
A
A 10"
22°–30' 10"
22°–30'
45° W
R W
R
22°–30' C
H
A
90° VERTICAL INSIDE BEND 90° VERTICAL OUTSIDE 90° HORIZONTAL BEND N
“A” “A” “A”
N
Catalog No. In. (mm)
E
Catalog No. In. (mm) Catalog No. In. (mm)
L
12" (305) Radius
22 (559)
S
W1
Note: Substitute “P” in place of “S” for punched channel. Example: EIP-HT-200 Note: Substitute “P” in place of “S” for punched channel. Example: EIP-HC-200
35
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
2 EISP-180-200 EISP-X-180-200 EISP-90V-200 EISP-45V-200 EISP-30V-200 EISP-22V-200 EISP-90H-200 EISP-45H-200 EISP-30H-200 EISP-22H-200
3 EISP-180-300 EISP-X-180-300 EISP-90V-300 EISP-45V-300 EISP-30V-300 EISP-22V-300 EISP-90H-300 EISP-45H-300 EISP-30H-300 EISP-22H-300
4 EISP-180-400 EISP-X-180-400 EISP-90V-400 EISP-45V-400 EISP-30V-400 EISP-22V-400 EISP-90H-400 EISP-45H-400 EISP-30H-400 EISP-22H-400
6 EISP-180-600 EISP-X-180-600 EISP-90V-600 EISP-45V-600 EISP-30V-600 EISP-22V-600 EISP-90H-600 EISP-45H-600 EISP-30H-600 EISP-22H-600
8 EISP-180-800 EISP-X-180-800 EISP-90V-800 EISP-45V-800 EISP-30V-800 EISP-22V-800 EISP-90H-800 EISP-45H-800 EISP-30H-800 EISP-22H-800
10 EISP-180-1000 EISP-X-180-1000 * * * * * * * *
* Contact factory for availability.
(222)
83/4"
4 (102) 1 (25) #505139SS * 1/4"–20 x 1" bolt sets for EIS-800 41/8" (156)
T 6 (152) 11/4 (32) 1/4" – 20 x 1"* 21/8" (105)
Y 8 (203) 11/4 (32)
channel tray only. All others use (54)
#505141SS
P 1/4 - 20 x 3/4". Contact factory for bolt 11/4"
10 (254) 21/4 (57)
E sets for 10" channel. A (32)
2
I
N
S 90° VERTICAL 45° VERTICAL 30° VERTICAL
T
11/4"
R (32) 21/8"
U (54)
6"
M (152)
A
2
E
N 45° 30°
T A
A
(152)
A
6"
T
I
O 47/8 "
N (124)
T
R 22.5° VERTICAL 90° HORIZONTAL 45° HORIZONTAL
A
Y
S A A 45°
A 2
22.5° 2
(136)
53/8"
47/8"
53/8"
(124)
(136)
30° 22.5°
5/16 Ø x 1 (8 x 25)
SLOTS
36
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
D
9/32" U
7/16" R
3/4" 7/16"
EC-10 1"
O
S
15/8" T
15/8"
R
EC-158D U
Polyester Resin T
Catalog No. EC-10 EC-158 EC-158D
Vinyl Ester Resin •
EC-VE-10 EC-VE-158 EC-VE-158D
T
Low Smoke / Non-Toxic Y
EC-Y-10 EC-Y-158 EC-Y-158D P
Lbs./Ft. 0.47 0.68 1.36 I
C
PBD PBS PB-1V A
CLOSURE STRIP STRUT POST BASE L
All holes 7/16"(11)
All All S
• Available for holes 61/2" holes U
• Standard Length 10 Ft. 7/16" (11) (165) 7/16" (11)
both single 3" P
3"
and double (76)
(76) P
strut. 6 1/
2"
O
7) 7"
(16
5) (12
5"(
12 7) (17
8) R
5" 7) (12
5" 1 /8
2 4)
" T
(5
Single - Available in Vinyl Ester Catalog No. PB-1V I
Catalog No. CS-158 Single - Available in Polyester or Polyurethane Catalog No. PBS-PE (Polyester) / PBS-PU (Polyurethane) N
Double - Available in Polyester or Polyurethane Catalog No. PBD-PE (Polyester) / PBD-PU (Polyurethane) S
T
A
L
CONCRETE INSERT L
1"
A
25/8"
37
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
15/8"
15/8"
D 45/8"
6" 7"
31/2"
U 10"
45/8"
R 45/8"
7"
31/2"
O
S
T
R CP-105 CP-109 CP-110 CP-111 CP-112
U
T
53/8"
53/8" 6"
31/2"
• 53/8"
31/2" 45/8" 53/8"
31/2"
S
T 31/2"
R
U CP-113 CP-114 CP-115 CP-116 CP-117
T
Note: Flat washer
7" not required for
& 10"
CP-205.
4"
7" 45/8"
15/8"
S 10"
U 5" 41/2"
P
7"
P 7/8"
7/8"
O
R
CP-118 CP-119 CP-120 CP-205 CP-209
T
Fittings below available in Polyester, Polyurethane, (alternate to Vinyl Ester), and Nylon.
S
Y 4"
15/8"
31/4" 15/8" 15/8"
35/8"
S Universal Angle
T 21/4" CP-501
E 41/2"
CP-501 (Polyester) 4-Hole Self Angle
M 15/8"
CP-502
7/8" 51/4" CP-PU-501 (Polyurethane)
S 4"
CP-NY-501 (Nylon) CP-502 (Polyester)
CP-211 CP-PU-502 (Polyurethane)
CP-210
CP-NY-502 (Nylon)
4"
4"
WINDOW CLAMP
41/2" 11/2" (38)
4"
15/8"
• Vinyl Ester resin.
7/8"
7/8" • Stainless Steel set screw included.
11/16"
23/4" (27)
CP-226 CP-405 (70)
Part No: WC-158
13/4"
4" (44)
(102)
31/2"
(89)
38
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Hanger Allowable S
FIBERGLASS CLEVIS HANGERS Catalog Nominal Dimension Inches Rod Load U
No. Dia. In A B C In. Lbs. Hanger rod P
mounting hole P
• Vinyl Ester resin. CH-010 1 15/8 43/4 3 1/2 200 O
CH-015 11/2 21/8 55/8 33/8 1/2 200
R
• Allowable loads have a T
CH-020 2 21/2 7 43/8 1/2 200
3:1 safety factor at 120°F. CH-025 21/2 35/16 69/16 41/4 1/2 200 S
CH-030 3 33/4 71/2 41/4 1/2 300 Y
• Insulation may be required CH-040 4 51/8 93/4 57/8 1/2 400
A
B S
Max.
at higher temperatures. CH-060 6 73/16 123/8 8 1/2 600 Pipe T
OD
C
E
CH-080 8 93/8 159/16 101/4 1/2 600 M
• Tolerance is 3/4" maximum. CH-100 10 1119/32 147/8 1211/16 5/8 600 S
CH-120 12 135/8 221/4 14 5/8 600
CH-140 14 151/4 263/16 163/4 5/8 600
B C
SR1-24P SR1-24V 28 12 10 480
B
SR2-24P SR2-24V 26 21 15 750
SR2-30P SR2-30V 32 21 15 750
1" SR2-36P SR2-36V 38 21 15 750
1"
39
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
If you need a special shape or assembly, call Enduro for information on custom pultrusions and fabrications.
S
Double Beam Clamp
U Hex Nut
P
P Threaded Rod Flat Washer
O
R Hold Down Clip
T Rod Coupler Stud
Cover
I DuroStrut ™
N Cable Tray
S Self-Locking Channel Nut
Hold Down Clip
T
A DuroStrut Channel Framing
™
L
L Nut & Flat Washer
A
T
I
O
N
S
DuroStrut ™
Fiberglass/Composite
Strut & Support Systems
40
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Beam and Column Data: Polyester and Vinyl Ester Resin Base
Beam Maximum Deflection
Span or Allowable @ Maximum Uniform Load Uniform Load Maximum
Column Uniform Allowable @ Maximum Deflection @ Maximum Deflection Allowable
Height Beam Load Uniform Beam Load = 0.25 In. (6mm) = 0.50 In. (13mm) Column Load
In. Catalog Poly Vinyl Poly Vinyl Poly Vinyl Poly Vinyl
(mm) No. Lbs. (kg) Lbs. (kg) In. (mm) In. (mm) Lbs. (kg) Lbs. (kg) Lbs. (kg) Lbs. (kg) Lbs. (kg)
12 EC-10 790 (358) 990 (449) 0.11 (3) 0.12 (3) • • • • • • • • 2550 (1156)
(305) EC-158 1720 (780) 2150 (975) 0.07 (2) 0.07 (2) • • • • • • • • 3650 (1655)
EC-158D 5080 (2301) 6350 (2880) 0.04 (1) 0.04 (1) • • • • • • • • 7300 (3111)
18 EC-10 530 (240) 670 (304) 0.24 (6) 0.27 (7) • • 620 (281) • • • • 2350 (1066)
(457) EC-158 1150 (521) 1440 (653) 0.15 (4) 0.17 (4) • • • • • • • • 3370 (1528)
EC-158D 5080 (2301) 4240 (1923) 0.09 (2) 0.10 (2) • • • • • • • • 6740 (3058)
EC-10 400 (181) 500 (227) 0.43 (11) 0.48 (12) 240 (109) 270 (122) • • • • 2070 (939)
D
24 U
(610) EC-158 860 (390) 1080 (490) 0.27 (7) 0.30 (8) 810 (367) 910 (412) • • • • 2960 (1342)
EC-158D 2540 (1152) 3180 (1442) 0.16 (4) 0.17 (4) • • • • • • • • 5920 (2685) R
EC-10
O
320 (145) 400 (181) 0.67 (17) 0.75 (19) 120 (54) 140 (63) 240 (109) 270 (122) 1710 (775)
30
EC-158 690 (313) 870 (394) 0.42 (11) 0.48 (12) 410 (186) 460 (209) • • • • 2450 (1111)
S
(762) T
EC-158D 2040 (925) 2550 (1156) 0.24 (6) 0.27 (7) 2000 (907) 2350 (1066) • • • • 4900 (2222)
R
EC-10 270 (122) 340 (154) 0.98 (25) 1.10 (28) 70 (31) 80 (36) 140 (63) 160 (72) 1260 (571)
36
EC-158
U
580 (263) 730 (331) 0.61 (15) 0.69 (19) 240 (109) 270 (122) 480 (217) 540 (245) 1800 (816)
(914)
EC-158D 1700 (771) 2130 (966) 0.35 (9) 0.39 (10) 1220 (553) 1370 (621) • • • • 3600 (1633)
T
42 EC-10 230 (104) 290 (131) 1.32 (34) 1.49 (38) 50 (22) 55 (25) 100 (45) 115 (52) 920 (417) •
(1067) EC-158 490 (222) 620 (281) 0.82 (21) 0.92 (23) 150 (68) 170 (77) 300 (136) 340 (154) 1320 (598)
EC-158D 1460 (662) 1830 (830) 0.48 (12) 0.62 (16) 770 (349) 870 (394) 1510 (650) 1720 (780) 2640 (1197)
T
48 EC-10 200 (91) 250 (113) 1.72 (44) 1.92 (49) 30 (13) 35 (16) 60 (27) 70 (31) 700 (317) E
(1219) EC-158 430 (195) 540 (245) 1.07 (27) 1.20 (30) 100 (45) 115 (52) 200 (90) 230 (104) 1010 (458) C
EC-158D 1270 (576) 1590 (721) 0.62 (16) 0.69 (17) 520 (236) 590 (267) 1040 (471) 1170 (530) 2020 (916) H
60 EC-10 160 (72) 200 (91) 2.68 (68) 2.99 (76) 20 (9) 23 (10) 40 (18) 45 (20) 180 (81) N
(1524) EC-158 350 (158) 400 (200) 1.70 (43) 1.91 (48) 60 (27) 70 (32) 120 (54) 135 (61) 260 (118) I
EC-158D 1020 (462) 1280 (580) 0.97 (25) 1.09 (28) 270 (122) 310 (140) 540 (245) 610 (276) 520 (235) C
72 EC-10 140 (63) 180 (81) * * * * 10 (4) 12 (5) 20 (9) 23 (10) • • A
(1829) EC-158 290 (131) 370 (168) 2.44 (62) 2.78 (71) 30 (13) 34 (15) 60 (27) 70 (32) • • L
EC-158D 850 (385) 1070 (485) 1.40 (35) 1.57 (40) 160 (72) 180 (81) 320 (145) 360 (163) • •
Beam Loads: Table lists the total allowable load for Column Loads: Table lists the total allowable axial Notes: All beams should be supported in a manner
various simple spans based on a minimum safety load for various unsupported column heights based to prevent rotation at supports. Long, deep beams
Loading Table factor 2:1. If load is concentrated at center of span, on a minimum safety factor of 3:1. Eccentric loads should be tied between supports to prevent twist.
Description multiply the load from the table by 0.5 and the should be reduced according to standard practice. * = Deflection is in excess of 3.00 In. (76mm);
corresponding deflection by 0.8. mid-span support is recommended.
NR = Not Recommended
41
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
DuroThread ™
INSTALLATION GUIDE
Cover
Metal and FRP Installation
When utilizing metal fasteners, connectors, or nuts, considera- Cable Tray
tion must be given to reduced strengths. DuroThread™ rod and Hold Down Clip
nuts are designed with maximum thread engagement and extra Channel Framing
nut thickness. Metal products have less thread engagement.
When installation requires metal components, special tests may Nut & Flat Washer
be necessary to define ultimate strengths of the fastener systems.
42
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
1"
BEAM CLAMPS
Description Catalog No.
2"
Single for 3/8" FRP Threaded Rod BCS-3/8
• Ultimate Load = 300 Lbs. Single for 1/2" FRP Threaded Rod BCS-1/2
• Recommended safety factor = 3. Double for 3/8" FRP Threaded Rod BCD-3/8
• SS set screws included with clamps. Double for 1/2" FRP Threaded Rod BCD-1/2
Single Double
43
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
44
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
MODULAR DESIGN
Typical Catalog Number Prefixing
Enduro ComWay™ Lay-in- All ComWay™ sections
Wireway has a modular and fittings are available
design which includes: in five sizes (in inches): 21/2"
• Straight sections • 21/2 x 21/2 4" 4"
• Elbows • 4x4 21/2" 4" 12"
• Tees • 6x6
CW 250 CW 404 CW 412
• Crosses • 4 x 12
• 6 x 12
Inquire about
other available sizes.
6" 6"
The 6 x 12 (CW 612) is available with or without a
divider. The divider allows separation of various 6" 6" 6"
cables as needed.
CW 606 CW 612
C
E O
STRAIGHT SECTIONS M
1/8" 1/8" W
ALL ComWay STRAIGHT SECTIONS AND FITTINGS
™ A
Y
ARE PROVIDED WITH A “SNAP-ON/SNAP-OFF” COVER Pultruded FRP Wireway Cover
• Straight Sections and Covers come in 10 Ft. lengths. •
FRP Wireway Cover
• Note: Splice Plates are a separate order item. Splice Plate 3" Deep
Dimension Inches (mm) D L
Catalog
A
No. A B C D E
Y
CW 250 x 10 N/A 2.5 2.5 3 N/A*
CW 404 x 10 33/16 (81) 4 (102) 4 (102) 43/4 (121) 53/8 (136)
FRP I
Wireway N
B
A
CW 412 x 10 33/16 (81) 4 (102) 12 (305) 123/4 (324) 133/8 (340) Body
Splice
CW 606 x 10 55/8 (143) 6 (152) 6 (152) 63/4 (171) 73/8 (187) Plate W
CW 612 x 10 55/8 (143) 6 (152) 12 (305) 123/4 (324) 133/8 (340) I
C R
* Cover body and splice plates not available for CW250. See below for splicing method. E
W
A
COVER BODY & SPLICE PLATES CW 250 HOLD DOWN SPLICE JOINT Y
See illustration above for a
3"
Cover S
cut or elevation view. Body Y
S
Wireway T
Body
E
1.13 (29) M
A
.75 (19)
Splice S
G
Plate
F
45
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
The Enduro ComWay™ Lay-in-Wireway has a modular design that includes the following fittings:
90° Direct Horizontal Bend 45° Direct Vertical Inside Bend Horizontal Tee Direct
90° Horizontal Bend 12" Radius 45° Vertical Inside Bend 12" Radius Horizontal Tee Direct 12" Radius
45° Direct Horizontal Bend 90° Direct Vertical Outside Bend Horizontal Cross Direct
45° Horizontal Bend 12" Radius 90° Vertical Outside Bend 12" Radius Horizontal Cross 12" Radius
90° Direct Vertical Inside Bend 45° Direct Vertical Outside Bend
90° Vertical Inside Bend 12" Radius 45° Vertical Outside Bend 12" Radius
L
A
Y Width Radius
Width 8"
I 203 mm A
N
Dimension Inches (mm) Dimension Inches (mm)
W Catalog No. A Catalog No. A L
I
R CW 250 - 90H 8 (203) CW 250 - 90H-12 221/2 (572) 3113/16 (808)
E CW 404 - 90H 1213/16 (325) CW 404 - 90H-12 2413/16 (630) 35 (889)
W CW 412 - 90H 21 (533) CW 412 - 90H-12 33 (838) 469/16 (1183)
A
Y CW 606 - 90H 15 (381) CW 606 - 90H-12 27 (686) 381/8 (968)
CW 612 - 90H 21 (533) CW 612 - 90H-12 33 (838) 469/16 (1183)
S
Y 45° DIRECT HORIZONTAL BEND 45° HORIZONTAL BEND 12" RADIUS
S
T Plan View
E Plan View
M W L
id
th
S
8"
203 mm
A
CW 250 - 45H 81/16 (205) CW 250 - 45H-12 59/16 (141) 257/8 (657)
CW 404 - 45H 101/2 (267) CW 404 - 45H-12 81/16 (205) 283/8 (721)
CW 412 - 45H 185/8 (473) CW 412 - 45H-12 163/16 (411) 349/16 (878)
CW 606 - 45H 125/8 (321) CW 606 - 45H-12 103/16 (259) 30 (762)
CW 612 - 45H 185/8 (473) CW 612 - 45H-12 163/16 (411) 349/16 (878)
46
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
B
CW 404 - PA 101/4 (260) 103/8 (264) CW 250 - CP304
CW 412 - PA 181/4 (463) 103/8 (264) CW 404 - CP304
CW 606 - PA 121/4 (311) 123/8 (314) CW 412 - CP304
p
CW 612 - PA 181/4 (463) 123/8 (314) " Ty A CW 606 - CP304
11 /2
11/2" Typ
CW 612 - CP304
* Please contact factory.
90° DIRECT VERTICAL INSIDE BEND 90° VERTICAL INSIDE BEND 12" RADIUS
Depth C
Side View Side View O
M
W
A
Y
L
8"
203 mm
•
A
A
L
Depth
Depth
A
Y
I
Dimension Inches (mm) Dimension Inches (mm) N
Catalog No. A Catalog No. A L
W
CW 250 - 90IV 101/2 (267) CW 404 - 90IV-12 179/16 (446) 2413/16 (630) I
CW 404 - 90IV 12 (305) CW 404 - 90IV-12 181/8 (460) 2511/16 (652) R
CW 412 - 90IV 12 (305) CW 412 - 90IV-12 181/8 (460) 2511/16 (652)
E
W
CW 606 - 90IV 14 (356) CW 606 - 90IV-12 181/8 (460) 2511/16 (652) A
CW 612 - 90IV 14 (356) CW 612 - 90IV-12 181/8 (460) 2511/16 (652) Y
45° DIRECT VERTICAL INSIDE BEND 45° VERTICAL INSIDE BEND 12" RADIUS S
Y
S
T
L Side View E
Side View 8"
203 mm M
S
8"
203 mm
A
Depth
CW 250 - 45IV 81/16 (205) CW 250 - 45IV-12 101/8 (257) 211/16 (535)
CW 404 - 45IV 103/8 (264) CW 404 - 45IV-12 115/16 (287) 213/4 (552)
CW 412 - 45IV 103/8 (264) CW 412 - 45IV-12 115/16 (287) 213/4 (552)
CW 606 - 45IV 113/16 (284) CW 606 - 45IV-12 123/4 (324) 213/4 (552)
CW 612 - 45IV 113/16 (284) CW 612 - 45IV-12 123/4 (324) 213/4 (552)
47
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
90° DIRECT VERTICAL OUTSIDE BEND 90° VERTICAL OUTSIDE BEND 12" RADIUS
A
Depth
L
8"
A
203 mm
Depth
C CW 250 - 90OV 101/2 (267) CW 250 - 90OV-12 193/16 (487) 271/8 (689)
O CW 404 - 90OV 12 (305) CW 404 - 90OV-12 221/8 (562) 313/8 (797)
M CW 412 - 90OV 12 (305) CW 412 - 90OV-12 221/8 (562) 313/8 (797)
W CW 606 - 90OV 14 (356) CW 606 - 90OV-12 243/16 (614) 343/16 (868)
A CW 612 - 90OV 14 (356) CW 612 - 90OV-12 243/16 (614) 343/16 (868)
Y
• 45° DIRECT VERTICAL OUTSIDE BEND 45° VERTICAL OUTSIDE BEND 12" RADIUS
L
A
Y
Depth
L Side View
I
Depth
N
A
W Side View
A
I
R 8"
E 203 mm
W
A
Y Dimension Inches (mm) Dimension Inches (mm)
Catalog No. A Catalog No. A L
S
Y CW 250 - 45OV 81/16 (205) CW 250 - 45OV-12 915/16 (252) 213/8 (543)
S CW 404 - 45OV 10 (254) CW 404 - 45OV-12 12 (305) 237/16 (595)
T CW 412 - 45OV 10 (254) CW 412 - 45OV-12 12 (305) 237/16 (595)
E
M CW 606 - 45OV 12 (305) CW 606 - 45OV-12 14 (356) 25 (635)
S CW 612 - 45OV 12 (305) CW 612 - 45OV-12 14 (356) 25 (635)
48
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Width
Width
A
A
8" 8"
203 mm 203 mm
Width
8" Radius Width Radius 8"
203 mm 203 mm
L
L
CW 250 - HT 101/2 (267) 181/2 (470) CW 250 - HT-12 221/2 (572) 421/4 (1073)
C
CW 404 - HT 13 (330) 205/8 (524) CW 404 - HT-12 2413/16 (630) 445/8 (1133)
O
CW 412 - HT 21 (533) 283/4 (730) CW 412 - HT-12 3215/16 (837) 523/4 (1340) M
CW 606 - HT 15 (381) 223/4 (578) CW 606 - HT-12 2615/16 (684) 463/4 (1187) W
CW 612 - HT 21 (533) 283/4 (730) CW 612 - HT-12 3215/16 (837) 523/4 (1340) A
Y
HORIZONTAL CROSS DIRECT HORIZONTAL CROSS 12" RADIUS •
203 mm
L
8"
I
A
A
N
203 mm
W
8"
I
R
8" Width 8" 8" Radius Radius 8" E
203 mm 203 mm 203 mm Width 203 mm W
A A
A Y
Dimension Inches (mm) Dimension Inches (mm)
Catalog No. A Catalog No. A S
Y
CW 250 - HC 181/2 (470) CW 250 - HC-12 421/4 (1073) S
CW 404 - HC 205/8 (524) CW 404 - HC-12 445/8 (1133) T
CW 412 - HC 283/4 (730) CW 412 - HC-12 523/4 (1140) E
CW 606 - HC 223/4 (578) CW 606 - HC-12 463/4 (1187) M
CW 612 - HC-12 523/4 (1140) S
CW 612 - HC 283/4 (730)
PHYSICAL PROPERTIES
Polyester Polyester
Property Fire retardant ASTM Test Property Fire retardant ASTM Test
Longitudinal Direction Electrical
Ultimate Tensile Strength 30,000 PSI D638 Electric Strength, Short Term in Oil 1/8", VPM* 200 D149
Ultimate Compressive Strength 30,000 PSI D965 Electric Strength, Short Term in Oil, KV per inch 35
Ultimate Flexural Strength 30,000 PSI D790 Thermal
Transverse Direction Thermal Coefficient of Expansion (Inches/Inch/°F)** 5 x 10-6 D696
Ultimate Tensile Strength 7,000 PSI Other
Ultimate Compressive Strength 15,000 PSI Density – Solid Shape Lbs./In. 0.065 D792
Ultimate Flexural Strength 10,000 PSI Water Absorption (24 Hr. Immersion) Max % by Wt. 0.50 D570
Surface Burning Characteristic, Maximum 25 E84
* Specimen tested perpendicular to laminate face ** Indicates reported value measured in longitudinal direction
Meets and exceeds test standards for UL 94-VO Flammability Classification and has a flame spread rating under 25 when tested in accordance with ASTM E84.
49
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Dim B
Fiberglass/Composite
Dimension A
Instrument & Pushbutton Stands
A universal instrument support
Dimension A
system that offers many of the Note:
Catalog No.: Minimum is 11"
same features and benefits Catalog No.:
as our cable tray, strut DISR170B1x(Dim. A) DISR175B48 x (Dim. A) x (Dim. B)
and wireway systems. Example: DISR170B148 Example: DISR175B48x11x12
Constructed from 2"
Schedule 80 gray vinyl DIM C
ester pipe with an 8"
gray square vinyl ester
O base. Available in a variety
Dim C
T
H of combinations to fit any Floor Mount Floor Mount
E mounting requirements. Double Multiple
Dimension A
R Delivered fully assembled, or DIMENSION A Instrument Dim B
available in component parts
P DIMENSION B
for field assembly.
R
O
D
U
C Catalog No.: Catalog No.:
T
S DISR171B x (Dim. A) x (Dim. B) x (Dim. C) DISR172B x (Dim. A) x (Dim. B) x (Dim. C)
Example: DISR171B48x36x18 Example: DISR172B36x12x15
• Made of pultruded fiberglass reinforced • Made from glass reinforced polyurethane resin,
vinyl ester 2" square tube with an U-Bolts are the ideal choice for mounting enclosures,
D
8" vinyl ester base. instrumentation, conduit, and piping on your
• Please specify dimensions in inches. StandFast™ support systems. C
TL
• Excellent as an alternative when replacing corroded
steel U-Bolts.
• Recommended for operating temperatures B A
up to 150°F.
• Four nuts included with each U-Bolt.
Dim B
Maximum Maximum
Pipe Rec. Rec.
Part Nom. Loading Torque
Number Dia. In. A B C D TL Lbs. In.-Lbs.
Dimension C
Dimension A
50
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Tuff Span ® Tuff Span™ Beams and Structural Shapes are a practical solution for
industrial building applications where long maintenance-free service life
Fiberglass/Composite in corrosive environments is required. They are available in premium
Beams & Structural Shapes grade polyester or vinyl ester resins.
Tuff Span® Construction strength fibers together, form the overall shape and resist
Tuff Span FRP Beams are deterioration from chemical attack.
produced by an advance O
pultrusion process that pro- Quality Assurance T
vides optimum strength and The Quality Assurance program at Enduro inspects H
modulus, consistency of mate- all Tuff Span products before, during, and after E
rial properties, close tolerances production. Raw materials such as resins, glass fibers, R
and good surface finish. The and additives are inspected on arrival to insure that
automated continuous process only the best materials go into Tuff Span products. P
Please call for a R
employs glass fiber reinforce- The QA staff inspect every Tuff Span structural member complete catalog and
ments such as continuous as it is manufactured. Each member must meet our O
technical data including D
rovings in longitudinal direc- stringent surface finish, dimensional, and color resin options, color
tion (for overall strength and requirements. Enduro maintains a continuous research U
options, temperature C
stiffness), non-woven fabrics and development program aimed at improving the effects, chemical effects,
(for local strength and stabili- performance of our existing products and developing T
physical properties, S
ty), and mat covered with veil (for added protection against new products to meet our customers' needs. design criteria, and
corrosion). The resin system is employed to bind the high loading tables.
Size in Inches Lbs./Ft. Size in Inches Lbs./Ft. Size in Inches Lbs./Ft. Size in Inches Lbs./Ft. Size in Inches Lbs./Ft.
51
DISEÑO Y PROYECTOS INDUSTRIALES, SA DE CV - productos@dpi.com.mx
Enduro Systems. Inc. offers one of the most diversified product lines
in the composites industry:
■ Cable Tray Systems ■ Tuff Span Building Panels ■ Dual Laminate Pipe and Tanks
■ Tank Covers and Baffles ■ Grating, Ladder, and Handrail ■ DuroLite Daylighting Panels
■ Structural Shapes and Strut ■ Pre-Engineered Buildings ■ Custom, Engineered Materials
Information on Enduro Systems, Inc. engineered fiberglass materials is available from our staff
of technical specialists and website: www.endurocomposites.com
Enduro
C O M P O S I T E S
TERMS and CONDITIONS of SALE
DAMAGE OR LOSS IN TRANSPORTATION CLAIMS: All shipments are F.O.B.
Enduro plant (Houston or Ft. Worth) or other Shipping Point, where title passes to pur-
A DIVISION OF ENDURO SYSTEMS, INC.
chaser upon pick-up. Consignee should file claim for loss or damage with transportation
company immediately upon receipt of goods.
1.800.231.7271 • www.endurocomposites.com
SHORTAGE CLAIMS: All shortage claims must be reported to our Houston or Fort
U.S.A. Headquarters: Asia Pacific Office: Worth, TX office within ten (10) days from receipt of shipment at destination. Written
7100 Old Katy Rd. • Houston, TX 77024 Singapore exception should be taken upon receipt of goods.
✆ 713.358.4000 • 713.358.4100 ✆ 65.98.292.076 • 65.64.672.659
RETURN OF GOODS: No material will be taken back and credited or replaced unless
sales@endurosys.com asiapacific@endurosys.com arrangements for such return have previously been made with our Houston or Fort Worth,
TX office within thirty (30) days from date of shipment. Cable tray products and special
Represented by: cut/color Tuff Span products are made to order and are noncancelable and nonreturnable.