Ex PDF
Ex PDF
Ex PDF
SECTION
EXHAUST SYSTEM
EX EX
E
CONTENTS
PRECAUTION ............................................... 2 EXHAUST SYSTEM ........................................... 4 F
Inspection ................................................................. 4
PRECAUTIONS ................................................... 2
Removal and Installation ........................................... 2 ON-VEHICLE REPAIR .................................. 5 G
PREPARATION ............................................ 3 EXHAUST SYSTEM ........................................... 5
Exploded View .......................................................... 5
PREPARATION ................................................... 3 Removal and Installation .......................................... 5 H
Commercial Service Tool .......................................... 3 Inspection ................................................................. 6
ON-VEHICLE MAINTENANCE ..................... 4
I
CAUTION:
• Be sure to use genuine exhaust system parts or equivalents which are specially designed for heat
resistance, corrosion resistance, and shape.
• Perform the operation with the exhaust system fully cooled down because the system will be hot
just after engine stops.
• Be careful not to cut your hand on the heat insulator edge.
E
PBIC0190E
SMA211A
JPBIA1697GB K
N
REMOVAL
Disconnect each joint and mounting using power tool.
INSTALLATION O
Note the following, and install in the reverse order of removal.
• If exhaust front tube stud bolts were removed, and install them and tighten to the specified torque below.
P
: 14.7 N·m (1.5 kg-m, 11 ft-lb)
CAUTION:
• Always replace exhaust tube gaskets with new ones when reassembling.
• If heat insulator is badly deformed, repair or replace it. If deposits such as mud pile up on the heat
insulator, remove them.
• When installing heat insulator avoid large gaps or interference between heat insulator and each
exhaust pipe.