Enclosure 1 - DUN.30.2009
Enclosure 1 - DUN.30.2009
Enclosure 1 - DUN.30.2009
MCU SW 2.5
Menu navigation :
up = [▲] down = [▼] right = [ENTER] left = [ESC]
Lcd X
(LCD status) Fu.oFF [%] XXX
(0=0ff, 1=on) Fuel off-set quality "▼ ▲" to change
adjustment +/- 15% "ENTER" to SAVE
ALR XX
(active alarms)
(see alarm list)
LAL XX
(logged alarms) F.hI [g/kWh] XXX
clear = [ENTER] (maximum feed rate) "▼ ▲" to change
(norm. 1.7) "ENTER" to SAVE
F.rAtE
(feed rate adj.) F.Lo [g/kWh]
(minimum feed rate)
(norm. 0.6)
diSP
(display menu)
Connt
(connection test
menu) F.dISP bAS.FE [g/kWh]
SEtuP (feed rate display (basic feed rate) XXX [g/kWh]
(setup menu) menu) (S% x S.FACt)
(MBD Service)
flow chart 1