2011 FLEET

CONSTRUCTION EQUIPMENT

2011 Fleet Guide

ADTs . . . . . . . . . . . . . . . . . . . . . . . . . 4 Backhoe Loaders . . . . . . . . . . . . . . . 6 Dozers . . . . . . . . . . . . . . . . . . . . . . . . 8 High-Speed Dozer . . . . . . . . . . . . . . 14 Crawler Loaders . . . . . . . . . . . . . . . 16 Excavators. . . . . . . . . . . . . . . . . . . . 18 Loaders . . . . . . . . . . . . . . . . . . . . . . 26 Landscape Loaders . . . . . . . . . . . . . 32 Motor Graders . . . . . . . . . . . . . . . . 34 Skid Steers . . . . . . . . . . . . . . . . . . . 36 Compact Track Loaders . . . . . . . . . 38 Waste Handlers . . . . . . . . . . . . . . . 40 Scrapers and Scraper Tractors . . . . 44 Customer Support . . . . . . . . . . . . . 48

IT JUST ROLLED OFF THE LINE, BUT IT HAS THEIR FINGERPRINTS ALL OVER IT.

Some companies think they have all the answers. But we prefer to call in the real experts our customers. So while were very proud of our new 850K, the real credit goes to the contractors who worked so closely with us throughout the entire design process to make sure we got it right. Check out our full line-up to see how contractors like you are casting their ideas in iron. And keep telling us exactly what you need. Were all ears.

YOURE ON.
Check out www.JohnDeere.com/YoureOn

Articulated Dump Trucks

Haul more for less.

If youre looking to deliver big numbers to your bottom line, put our D-Series II Articulated Dump Trucks to work. These hard-charging ADTs handle heaped payloads with fast cycle times and unsurpassed fuel efficiency so youll move big loads at less cost. Their quiet cabs are loaded with productivity- and uptime-enhancing features such as auto shutdown, pushbutton-transmission and dump-body controls, onboard weighing, and tire-pressure monitoring, to list just a few. With our ADTs, you get everything you need to keep materials and profits flowing.
www.JohnDeere.com/adts

250D Series-II Articulated Dump Truck Net power (ISO 9249): 198 kW (265 hp) @ 2,000 rpm Operating weight: 18 314 kg (40,340 lb.) empty / 41 536 kg (91,490 lb.) loaded Heaped capacity: 13.8 m3 (18.0 cu. yd.) @ 2-to-1 SAE ratio / 16.9 m3 (22.1 cu. yd.) @ 1-to-1 SAE ratio Rated payload: 23 222 kg (51,150 lb.)

300D Series-II Articulated Dump Truck Net power (ISO 9249): 212 kW (285 hp) @ 2,200 rpm Operating weight: 19 541 kg (42,990 lb.) empty / 46 900 kg (103,180 lb.) loaded Heaped capacity: 16.6 m3 (21.7 cu. yd.) @ 2-to-1 SAE ratio / 20.3 m3 (26.6 cu. yd.) @ 1-to-1 SAE ratio Rated payload: 27 326 kg (60,190 lb.)

350D Series-II Articulated Dump Truck Net power (ISO 9249): 283 kW (380 hp) @ 1,800 rpm Operating weight: 28 255 kg (62,160 lb.) empty / 60 823 kg (133,810 lb.) loaded Heaped capacity: 20.1 m3 (26.3 cu. yd.) @ 2-to-1 SAE ratio / 24.6 m3 (32.2 cu. yd.) @ 1-to-1 SAE ratio Rated payload: 32 529 kg (71,650 lb.)

400D Series-II Articulated Dump Truck Net power (ISO 9249): 308 kW (413 hp) @ 1,800 rpm Operating weight: 29 920 kg (65,960 lb.) empty / 66 920 kg (147,530 lb.) loaded Heaped capacity: 22.5 m3 (29.4 cu. yd.) @ 2-to-1 SAE ratio / 27.4 m3 (35.8 cu. yd.) @ 1-to-1 SAE ratio Rated payload: 37 033 kg (81,570 lb.)

300D Series-II Water-Wagon Chassis Net power (ISO 9249): 212 kW (285 hp) @ 2,000 rpm Operating weight: 22 303 kg (49,125 lb.) empty / 49 130 kg (108,215 lb.) loaded Water tank capacity: 26 498 L (7,000 gal.) Water pump flow: 5678 L/m (1,500 gpm) @ 689 kPa (100 psi) Maximum water load: 26 827 kg (59,090 lb.)

PAGES 45

Backhoe Loaders

Exceed your expectations.

Most backhoe loaders perform the same typical tasks. But when you want one that typically outperforms the others, youll run a Deere. Choose from a variety of control options and machine configurations including the 310SJ and 410J TMC machines with armrest-mounted joystick controls. Plus, tool-carrier options with one-of-a-kind setand-forget parallel lift. Whether you opt for the value-leading 310J or the incomparable 710J, you can count on maximum productivity and versatility for years to come.
www.JohnDeere.com/backhoes

110 Tractor Loader Backhoe 30.6 kW (41 net hp) @ 2,600 rpm Typical operating weight: 3667 kg (7,600 lb.) Digging depth: 3.1 m (10 ft. 1 in.) Loader breakout force: 17.6 kN (3,965 lb.) Loader lifting capacity: 926 kg (2,042 lb.) Backhoe bucket size range: 305914 mm (1236 in.)

310J Backhoe 63 kW (84 net hp) @ 2,000 rpm Operating weight: 6295 kg (13,880 lb.) Digging depth: 4.34 m (14 ft. 3 in.) Loader breakout force: 41.6 kN (9,350 lb.) Loader lifting capacity: 2996 kg (6,600 lb.) Loader bucket size range: 0.770.96 m3 (1.00 1.25 cu. yd.) Backhoe bucket size range: 305762 mm (1230 in.)

310SJ / 310SJ TC Backhoes 69 kW (93 net hp) @ 2,000 rpm Operating weights: 6580 kg (14,510 lb.) / 8171 kg (18,017 lb.) Digging depths: 4.42 m (14 ft. 6 in.) / 4.555.61 m (14 ft. 11 in.18 ft. 5 in.) Loader breakout forces: 49.6 kN (11,160 lb.) / 50.2 kN (11,287 lb.) Loader lifting capacities: 3368 kg (7,419 lb.) / 3190 kg (7,026 lb.) Loader bucket size range: 0.771.00 m3 (1.00 1.31 cu. yd.) Backhoe bucket size range: 305762 mm (1230 in.)

315SJ Backhoe 69 kW (93 net hp) @ 2,000 rpm Operating weight: 8437 kg (18,600 lb.) Digging depths: 4.42 5.49 m (14 ft. 6 in. 18 ft. 0 in.) Loader breakout force: 49.6 kN (11,160 lb.) Loader lifting capacity: 3368 kg (7,419 lb.) Loader bucket size range: 0.771.00 m3 (1.00 1.31 cu. yd.) Backhoe bucket size range: 305762 mm (1230 in.)

410J / 410J TC Backhoes 73 kW (98 net hp) @ 2,000 rpm Operating weights: 6839 kg (15,080 lb.) / 8626 kg (19,022 lb.) Digging depths: 4.83 m (15 ft. 10 in.) / 4.90 6.10 m (16 ft. 1 in. 20 ft. 0 in.) Loader breakout forces: 45.4 kN (10,210 lb.) / 45.8 kN (10,300 lb.) Loader lifting capacities: 3332 kg (7,340 lb.) / 3008 kg (6,625 lb.) Loader bucket size range: 0.961.15 m3 (1.25 1.50 cu. yd.) Backhoe bucket size range: 305762 mm (1230 in.)

710J Backhoe 94 kW (126 net hp) @ 2,000 rpm Operating weight: 10 431 kg (23,000 lb.) Digging depth: 5.44 m (17 ft. 10 in.) Loader breakout force: 69.1 kN (15,540 lb.) Loader lifting capacity: 4212 kg (9,277 lb.) Loader bucket size range: 1.051.43 m3 (1.375 1.87 cu. yd.) Backhoe bucket size range: 610914 mm (2436 in.)

PAGES 67

Utility Dozers

Uncommon control, uncompromising results.

Others may offer hydrostatic drivetrains, but no other crawler comes close to delivering the performance of our J-Series Crawler Dozers. Total Machine Control puts you in command via power turns, counterrotation, and infinitely variable travel speeds. And, these machines are prewired for plug-and-play GPS-friendly Integrated Grade Control. No wonder theyre operator favorites and the industrys resale-value leader.
www.JohnDeere.com/dozers

450J Crawler Dozer 57 kW (77 net hp) @ 2,200 rpm Operating weight: 7386 7949 kg (16,28317,525 lb.) Track on ground: 2184 mm (86 in.) Blade width range: 2464 3150 mm (97124 in.) Undercarriage configurations: LT and LGP Add versatility with JDLink, Integrated Grade Control, brush protection, winch, or ripper

550J Crawler Dozer 63 kW (85 net hp) @ 2,200 rpm Operating weight: 7718 8279 kg (17,01618,252 lb.) Track on ground: 2184 mm (86 in.) Blade width range: 2667 3150 mm (105124 in.) Undercarriage configurations: LT and LGP Add versatility with JDLink, Integrated Grade Control, brush protection, winch, or ripper

650J Crawler Dozer 74 kW (99 net hp) @ 2,200 rpm Operating weight: 8419 8977 kg (18,56019,750 lb.) Track on ground: 2210 2337 mm (8792 in.) Blade width range: 2667 3150 mm (105124 in.) Undercarriage configurations: LT, XLT, and LGP Add versatility with JDLink, Integrated Grade Control, brush protection, winch, or ripper

PAGES 89

Grading Dozers

G Go beyond the limits of other dozers.

Other dozers cant measure up to the flexibility and operating ease Ot t yo o you get with John Deere. Our dozers dual-path hydrostatic drivetrains pr r provide full-power turns, counterrotation, and infinitely variable track sp p speeds. Total Machine Control lets an operator customize machine op p operating characteristics and response. With optional Integrated Gr r Grade Control, your dozer arrives from the factory ready to add the gr r grade-control system thats best for you. If you want an EPA Interim Tie e Tier 4/EU Stage IIIB dozer, check out the new 850K. Its available in nu numerous blade and undercarriage configurations.
www.JohnDeere.com/dozers w

700J Crawler Dozer 86 kW (115 net hp) @ 2,100 rpm Operating weight: 11 84012 832 kg (26,10228,290 lb.) Track on ground: 2423 2616 mm (95.4103 in.) Blade width range: 3048 3353 mm (120132 in.) Undercarriage configurations: LT, XLT, and LGP Add versatility with JDLink, Integrated Grade Control, brush protection, winch, or ripper

750J Crawler Dozer 108116 kW (145 155 net hp) @ 2,100 rpm Operating weight: 14 77816 655 kg (32,58536,725 lb.) Track on ground: 2591 3073 mm (102121 in.) Blade width range: 3296 3962 mm (129.75156 in.) Blade configurations: PAT and outside dozer Undercarriage configurations: standard, LT, and LGP Add versatility with JDLink, Integrated Grade Control, brush protection, winch, or ripper

850K Crawler Dozer 139.5152 kW (187 205 net hp) @ 1,800 rpm Base weight: 19 295 21 684 kg (42,449 47,705 lb.) Track on ground: 2769 3284 mm (109129 in.) Blade width range: 3251 4267 mm (128168 in.) Blade configurations: PAT and outside dozer Undercarriage configurations: standard, LT, WT, WLT, and LGP Add versatility with JDLink, Integrated Grade Control, brush protection, winch, or ripper

PAGES 1011

Production Dozers

Push the limits.

Big, strong, and powerful, our 950J and 1050J Dozers deliver the super-sized performance you need to get the big jobs done. But its not just their large stature that make these dozers such valuable assets. State-of-the-art electronic controls, Total Machine Control, and a full-featured hydrostatic drivetrain these two offer many of the production-boosting advantages that have made our J-Series Dozers so popular. You simply wont find comparable-size crawlers with the same combination of power, control, reliability, and comfort.
www.JohnDeere.com/dozers

950J Crawler Dozer 184 kW (247 net hp) @ 1,600 rpm Operating weight: 25 56526 877 kg (56,36159,255 lb.) Track on ground: 2997 3316 mm (118131 in.) Blade width range: 3.74.5 m (145177 in.) Blade configurations: semi-U and straight Undercarriage configurations: standard and LGP Options: parallelogram multi-shank ripper

1050J Crawler Dozer 250 kW (335 net hp) @ 1,600 rpm Operating weight: 35 309 kg (77,843 lb.) Track on ground: 3175 mm (125 in.) Blade width range: 4.044.3 m (159170 in.) Blade configurations: semi-U and U Undercarriage configuration: standard Options: parallelogram single- and multi-shank rippers

PAGES 1213

High-Speed Dozer

Feeling Feeling the need for speed?

This This one-of-a-kind machine finish-grades and dozes up to twice as h ma cr fast as a traditional crawler. Articulated-frame steering and purposebuilt u oscilla built four-track oscillating undercarriage make it highly maneuverable. Long-life o track Long-life rubber tracks enable it to traverse hard surfaces such as concrete o dam concrete without damage. And travel to the next task at speeds up to 25.7 5 S 25.7 km/h (16 mph). Standard equipped with medium-duty Category 4 drawbar r flow-adj drawbar and flow-adjustable rear hydraulics, this highly versatile taskwit master works well with a wide variety of pull-type attachments, too.
www.JohnDeere.com/hsd www.Joh D J hnDeere.com/h /h

764 High-Speed Dozer 149157 kW (200 210 net hp) @ 1,800 rpm Operating weight: 15 422 kg (34,000 lb.) Track on ground: 1346 mm (53 in.) Blade width: 3353 mm (132 in.) Blade configuration: PAT

PAGES 1415

Crawler Loaders

M Multitasking made easier.

W Whether youre excavating, loading trucks, or backfilling, our crawler lo loaders provide the muscle and versatility you need to put your operat ation on the fast track. Unsurpassed visibility, spacious cabs, easyto to-operate controls, high-torque diesel engines, and full-featured hy hydrostatic drivetrains help simplify a wide variety of work. If you want an EPA Interim Tier 4/EU Stage IIIB loader, check out the new 755K. Li Literally loaded with production- and uptime-enhancing features, it itll change your mind about crawler loaders.
w www.JohnDeere.com/crawlers

605C Crawler Loader 74 kW (99 net hp) @ 2,200 rpm Operating weight: 10 700 kg (23,600 lb.) Bucket breakout force: 10 200 kg (22,480 lb.) Bucket capacity heaped: 1.3 m3 (1.7 cu. yd.) Static tipping load: 6690 kg (14,750 lb.) Overall length (with bucket): 5383 mm (212 in.) Bucket width: 2300 mm (91 in.)

655C Series-II Crawler Loader 97 kW (130 net hp) @ 2,000 rpm Operating weight: 15 400 kg (33,950 lb.) Bucket breakout force: 12 550 kg (27,675 lb.) Bucket capacity heaped: 1.8 m3 (2.35 cu. yd.) Static tipping load: 10 470 kg (23,086 lb.) Overall length (with bucket): 6132 mm (241 in.) Bucket width: 2445 mm (96 in.)

755K Crawler Loader 141.7 kW (190 net hp) @ 1,800 rpm Operating weight: 20 492 kg (45,178 lb.) Bucket breakout force: 197 kN (44,300 lbf) Bucket capacity heaped: 2.45 m3 (3.2 cu. yd.) Static tipping load: 15 362 kg (33,867 lbf) Overall length (with bucket): 6824 mm (268.6 in.) Bucket width: 2537.3 mm (100 in.)

PAGES 1617

Compact Excavators

D Dont bust your tail.

So Some work requires a smaller machine to achieve bigger results. For o tho h those kinds of jobs, turn to one of our compact excavators. Their small sta stature, independent swing boom, and reduced- and zero-tail-swing de e designs enable these highly maneuverable machines to put more work wit within reach. When getting there is half the battle, choose a 17D. s Its retractable undercarriage enables it to squeeze through narrow op p openings. For mechanized muscle in places where shovels used to e be the only option.
www.JohnDeere.com/excavators ww

17D Compact Excavator 11.0 kW (14.8 net hp) @ 2,400 rpm Operating weight: 1893 kg (4,173 lb.) Digging depth: 2.17 m (7 ft. 1 in.) Digging reach: 3.90 m (12 ft. 10 in.) Bucket breakout force: 16.0 kN (3,597 lb.) Swing speed: 08.9 rpm Arm lengths: 0.93 m (3 ft. 1 in.) standard / 1.13 m (3 ft. 8 in.) long

27D Compact Excavator 19.7 kW (26.4 net hp) @ 2,200 rpm Operating weight: 2887 3055 kg (6,3586,730 lb.) Digging depth: 2.59 m (8 ft. 6 in.) Digging reach: 4.67 m (15 ft. 4 in.) Bucket breakout force: 22.2 kN (4,994 lb.) Swing speed: 09.1 rpm Arm lengths: 1.17 m (3 ft. 10 in.) standard / 1.47 m (4 ft. 10 in.) long

35D Compact Excavator 21.3 kW (28.6 net hp) @ 2,400 rpm Operating weight: 3520 3690 kg (7,7608,135 lb.) Digging depth: 3.05 m (10 ft. 0 in.) Digging reach: 5.21 m (17 ft. 1 in.) Bucket breakout force: 27.5 kN (6,182 lb.) Swing speed: 09.0 rpm Arm lengths: 1.35 m (4 ft. 4 in.) standard / 1.75 m (5 ft. 8 in.) long

50D Compact Excavator 28.4 kW (38.1 net hp) @ 2,400 rpm Operating weight: 49045064 kg (10,81111,164 lb.) Digging depth: 3.55 m (11 ft. 8 in.) Digging reach: 5.94 m (19 ft. 6 in.) Bucket breakout force: 36.8 kN (8,273 lb.) Swing speed: 09.0 rpm Arm lengths: 1.38 m (4 ft. 6 in.) standard / 1.69 m (5 ft. 7 in.) long

60D Compact Excavator 40.5 kW (54 net hp) @ 2,000 rpm Operating weight: 6193 kg (13,653 lb.) Digging depth: 3.77 m (12 ft. 4 in.) Digging reach: 6.23 m (20 ft. 5 in.) Bucket breakout force: 41.0 kN (9,217 lb.) Swing speed: 09.5 rpm Arm lengths: 1.5 m (4 ft. 11 in.) standard / 1.85 m (6 ft. 1 in.) long

PAGES 1819

Wheeled Excavators

Now youre going places.

John Deere wheeled excavators easily navigate streets and hard surfaces to deliver powerful bucket forces in well-balanced, highstability machines. Even with all that muscle outside, operators find quiet comfort inside spacious air-conditioned cabs. Like all of our excavators, low-effort levers deliver smooth boom and bucket control. Climb aboard a John Deere excavator and get to the bottom of increased productivity.
www.JohnDeere.com/excavators

190D W Wheeled Excavator 119 kW (159 net hp) @ 2,000 rpm Operating weight: 19 60019 971 kg (43,21144,029 lb.) Digging depth / Maximum reach: 5.83 m (19 ft. 2 in.) / 9.58 m (31 ft. 5 in.) Bucket digging force: 101.9 kN (22,916 lb.) Arm length: 2.71 m (8 ft. 11 in.) Arm force: 82.1 kN (18,465 lb.) Optional two-piece boom

220D W Wheeled Excavator 119 kW (159 net hp) @ 2,000 rpm Operating weight: 22 32022 629 kg (49,20749,888 lb.) Digging depth / Maximum reach: 6.29 m (20 ft. 8 in.) / 10.17 m (33 ft. 4 in.) Bucket digging force: 128.6 kN (28,904 lb.) Arm length: 2.91 m (9 ft. 7 in.) Arm force: 101.7 kN (22,873 lb.) Optional two-piece boom

PAGES 2021

Excavators

Big Big performance in every size.

With With a full line of models, plus numerous options and attachments, weve got o got excavators for all of your tasks. These highly versatile machines bring r bring maximum productivity to the jobsite with cool-running efficiency. Spac p Spacious cabs provide unsurpassed visibility, and low-effort joystick cont o controls, unmatched metering, and smooth multifunction operation prov r provide the precision you need. If you want an EPA Interim Tier 4/ US EU Stage IIIB excavator, check out our new G-Series.
www.JohnDeere.com/excavators www

75D Excavator 40.5 kW (54 net hp) @ 2,000 rpm Operating weight: 8048 kg (17,743 lb.) Digging depth: 4.11 m (13 ft. 6 in.) Maximum reach: 6.43 m (21 ft. 1 in.) Bucket digging force: 55.0 kN (12,368 lb.) Maximum travel speed: 5.0 km/h (3.1 mph) Arm lengths: 1.62 m (5 ft. 4 in.) / 2.12 m (6 ft. 11 in.) Arm force: 38.1 kN (8,554 lb.) Drawbar pull: 6650 kg (14,661 lb.)

85D Excavator 40.5 kW (54 net hp) @ 2,000 rpm Operating weight: 8537 kg (18,821 lb.) Digging depth: 3.97 m (13 ft. 0 in.) Maximum reach: 7.21 m (23 ft. 8 in.) Bucket digging force: 55.0 kN (12,368 lb.) Maximum travel speed: 5.0 km/h (3.1 mph) Arm lengths: 1.62 m (5 ft. 4 in.) / 2.12 m (6 ft. 11 in.) Arm force: 38.1 kN (8,554 lb.) Drawbar pull: 6650 kg (14,661 lb.)

120D Excavator 69 kW (93 net hp) @ 2,000 rpm Operating weight: 12 92613 926 kg (28,49830,702 lb.) Digging depth: 6.06 m (19 ft. 11 in.) Maximum reach: 8.79 m (28 ft. 10 in.) Bucket digging force: 92.3 kN (20,751 lb.) Arm lengths: 2.52 m (8 ft. 3 in.) / 3.01 m (9 ft. 11 in.) Arm force: 57.0 kN (12,823 lb.) Drawbar pull: 11 216 kg (24,729 lb.)

135D Excavator 69 kW (93 net hp) @ 2,000 rpm Operating weight: 14 12814 854 kg (31,14732,747 lb.) Digging depth: 6.02 m (19 ft. 9 in.) Maximum reach: 8.85 m (29 ft. 0 in.) Bucket digging force: 96.5 kN (21,698 lb.) Arm lengths: 2.52 m (8 ft. 3 in.) / 3.01 m (9 ft. 11 in.) Arm force: 57.6 kN (12,942 lb.) Drawbar pull: 11 931 kg (26,303 lb.)

160D LC Excavator 90 kW (121 net hp) @ 2,200 rpm Operating weight: 18 151 kg (39,980 lb.) Digging depth: 6.49 m (21 ft. 4 in.) Maximum reach: 9.33 m (30 ft. 7 in.) Bucket digging force: 101.0 kN (22,697 lb.) Arm lengths: 2.60 m (8 ft. 6 in.) / 3.10 m (10 ft. 2 in.) Arm force: 76.7 kN (17,243 lb.) Drawbar pull: 17 250 kg (38,030 lb.)

PAGES 2223

Excavators

290G LC Excavator 147 kW (197 net hp) @ 2,000 rpm Operating weight: 30 090 kg (66,338 lb.) Digging depth: 7.88 m (25 ft. 10 in.) Maximum reach: 11.27 m (37 ft. 0 in.) Bucket digging force: 175.0203.0 kN (39,352 45,636 lb.) Arm lengths: 3.11 m (10 ft. 2 in.) / 3.75 m (12 ft. 4 in.) Arm force: 121.3127.0 kN (27,27728,551 lb.) Drawbar pull: 25 100 kg (55,336 lb.)

350G LC Excavator 223 kW (299 net hp) @ 1,800 rpm Operating weight: 34 726 kg (76,557 lb.) Digging depth: 8.18 m (26 ft. 10 in.) Maximum reach: 11.86 m (38 ft. 11 in.) Bucket digging force: 225.2246.0 kN (50,628 55,303 lb.) Arm lengths: 2.66 m (8 ft. 9 in.) / 3.2 m (10 ft. 6 in.) / 4.0 m (13 ft. 1 in.) Arm force: 152.6159.0 kN (34,31435,745 lb.) Drawbar pull: 29 200 kg (64,375 lb.)

470G LC Excavator 270 kW (367 net hp) @ 2,000 rpm Operating weight: 49 420 kg (108,952 lb.) Digging depth / Maximum reach: 8.28 m (27 ft. 2 in.) / 12.50 m (41 ft. 0 in.) Bucket digging force: 286 kN (64,295 lb.) Arm lengths: 2.9 m (9 ft. 6 in.) / 2.9 m (9 ft. 6 in.) mass excavating / 3.4 m (11 ft. 2 in.) / 3.9 m (12 ft. 10 in.) / 4.9 m (16 ft. 1 in.) Arm force: 201 kN (45,187 lb.) Drawbar pull: 37 219 kg (82,054 lb.)

200D / 200D LC Excavators 119 kW (159 net hp) @ 2,000 rpm Operating weight: 22,07222 673 kg (48,61749,940 lb.) Digging depth: 6.68 m (21 ft. 11 in.) Maximum reach: 9.92 m (32 ft. 7 in.) Bucket digging force: 129.4 kN (29,099 lb.) Arm lengths: 2.42 m (7 ft. 11 in.) / 2.91 m (9 ft. 7 in.) Arm force: 102.0 kN (22,924 lb.) Drawbar pull: 20 711 kg (45,620 lb.)

225D LC Excavator 118 kW (159 net hp) @ 2,000 rpm Operating weight: 24 487 kg (53,936 lb.) Digging depth: 6.70 m (22 ft. 0 in.) Maximum reach: 10.01 m (32 ft. 10 in.) Bucket digging force: 129.4 kN (29,099 lb.) Arm lengths: 2.42 m (7 ft. 11 in.) / 2.91 m (9 ft. 7 in.) Arm force: 102.0 kN (22,924 lb.) Drawbar pull: 20 719 kg (45,636 lb.)

250G LC Excavator 142 kW (191 net hp) @ 2,000 rpm Operating weight: 25 281 kg (55,736 lb.) Digging depth: 7.61 m (25 ft. 0 in.) Maximum reach: 10.91 m (35 ft. 10 in.) Bucket digging force: 175.9189.0 kN (39,552 42,489 lb.) Arm lengths: 2.96 m (9 ft. 9 in.) / 3.61 m (11 ft. 10 in.) Arm force: 112.2114.0 kN (25,22025,628 lb.) Drawbar pull: 22 650 kg (49,935 lb.)

670G LC Excavator 345 kW (463 net hp) @ 1,800 rpm Operating weight: 69 033 kg (152,192 lb.) Digging depth / Maximum reach: 9.14 m (30 ft. 0 in.) / 13.84 m (45 ft. 5 in.) Bucket digging force: 290 kN (65,189 lb.) Arm lengths: 2.9 m (9 ft. 6 in.) mass excavating / 3.6 m (11 ft. 10 in.) / 4.2 m (13 ft. 9 in.) / 5.3 m (17 ft. 5 in.) Arm force: 224 kN (50,352 lb.) Drawbar pull: 46 115 kg (101,666 lb.)

870G LC Excavator 397 kW (532 net hp) @ 1,800 rpm Operating weight: 87 659 kg (193,255 lb.) Digging depth / Maximum reach: 9.57 m (31 ft. 5 in.) / 14.91 m (48 ft. 11 in.) Bucket digging force: 399 kN (89,699 lb.) Arm lengths: 2.95 m (9 ft. 8 in.) mass excavating / 3.7 m (12 ft. 2 in.) / 4.4 m (14 ft. 5 in.) / 5.4 m (17 ft. 9 in.) Arm force: 280 kN (62,946 lb.) Drawbar pull: 57 240 kg (126,193 lb.)
PAGES 2425

Compact Loaders

Need more wiggle room?

Turn to these highly capable tight-turning machines and take on tasks that other compact loaders cant. Their unique oscillating stereo steering turns tight, yet articulates less, keeping the center of gravity in-line for superior tipping load capacity. Delivers exceptional breakout, reach, stability, and speed range, too. If you need an EPA Interim Tier 4/EU Stage IIIB loader, check out the 244J.
www.JohnDeere.com/loaders

244J Loader 46 kW (62 net hp) @ 2,600 rpm Operating weight: 5240 kg (11,552 lb.) Bucket capacity range: 0.81.1 m3 (1.01.4 cu. yd.) Breakout force: 4895 kg (10,792 lb.) Full-turn tipping load: 3501 kg (7,718 lb.)

304J Loader 56 kW (75 net hp) @ 2,800 rpm Operating weight: 6080 kg (13,404 lb.) Bucket capacity: 1.1 m3 (1.4 cu. yd.) Breakout force: 5608 kg (12,364 lb.) Full-turn tipping load: 4225 kg (9,315 lb.)

344J Loader 72 kW (97 net hp) @ 2,400 rpm Operating weight: 8350 kg (18,408 lb.) Bucket capacity range: 1.31.5 m3 (1.75 2.0 cu. yd.) Breakout force: 7852 kg (17,310 lb.) Full-turn tipping load: 5680 kg (12,522 lb.)

PAGES 2627

Utility Loaders

Take productivity to a higher level.

Whether youre shuttling sand, stockpiling silage, placing pallets, or loading out trucks, K-Series Loaders will put you at the top of your game. Each comes loaded with production-boosting advantages such as state-of-the-art multifunction monitor with advanced diagnostics, convenient sealed-switch module, and innovative Quad-Cool system that keeps everything running cool.
www.JohnDeere.com/loaders

444K Loader 95 kW (128 net hp) @ 2,100 rpm Operating weight: 11 05512 074 kg (24,37226,619 lb.) Bucket capacity range: 1.51.9 m3 (2.02.5 cu. yd.) Breakout force: 6056 8023 kg (13,35217,688 lb.) Full-turn tipping load: 61058072 kg (13,459 17,796 lb.) Configurations: Z-Bar, High-Lift, and Powerllel

524K Loader 110 kW (146 net hp) @ 2,000 rpm Operating weight: 12 28212 861 kg (27,07728,354 lb.) Bucket capacity range: 1.92.1 m3 (2.52.75 cu. yd.) Breakout force: 69848504 kg (15,39722,394 lb.) Full-turn tipping load: 66298935 kg (14,614 19,698 lb.) Configuration: Z-Bar and High-Lift

544K Loader 125 kW (167 net hp) @ 1,900 rpm Operating weight: 12 80213 840 kg (28,22430,511 lb.) Bucket capacity range: 1.92.3 m3 (2.53.0 cu. yd.) Breakout force: 836711 000 kg (18,44624,251 lb.) Full-turn tipping load: 71109508 kg (15,676 20,961 lb.) Configurations: Z-Bar, High-Lift, and Powerllel

624K Loader 147 kW (198 net hp) @ 1,800 rpm Operating weight: 15 18516 454 kg (33,47736,275 lb.) Bucket capacity range: 2.32.7 m3 (3.03.5 cu. yd.) Breakout force: 10 07512 920 kg (22,21228,484 lb.) Full-turn tipping load: 892412 031 kg (19,67426,524 lb.) Configurations: Z-Bar, High-Lift, Powerllel, and Tool Carrier

PAGES 2829

Production Loaders

Make a big production out of everything.

Unmatched stability, the smoothest ride on the jobsite, and impressive loading performance K-Series Loaders deliver everything you want in a production-class loader. Each is loaded with productivity- and uptime-boosting advantages including smooth-as-silk PowerShift transmissions, high-torque PowerTech diesels, Quad-Cool system, and state-of-the-art multifunction monitors. For work in nonattainment areas, 644K, 724K, and 744K Loaders are available with EPA Interim Tier 4/EU Stage IIIB diesels.
www.JohnDeere.com/loaders

644K Loader 173 kW (232 net hp) @ 1,700 rpm Operating weight: 18 33319 966 kg (40,40644,005 lb.) Bucket capacity range: 3.13.2 m3 (4.04.25 cu. yd.) Breakout force: 12 02915 378 kg (26,51933,903 lb.) Full-turn tipping load: 949612 879 kg (20,934 28,393 lb.) Configurations: Z-Bar, High-Lift, and Powerllel

724K Loader 197 kW (264 net hp) @ 1,800 rpm Operating weight: 19 17119 788 kg (42,25343,613 lb.) Bucket capacity range: 3.13.6 m3 (4.04.75 cu. yd.) Breakout force: 12 40415 607 kg (27,34634,408 lb.) Full-turn tipping load: 10 35114 253 kg (22,81931,421 lb.) Configurations: Z-Bar and High-Lift

744K Loader 227 kW (304 net hp) @ 1,500 rpm Operating weight: 24 34624 897 kg (53,67454,889 lb.) Bucket capacity range: 4.04.4 m3 (5.255.75 cu. yd.) Breakout force: 17 43319 462 kg (38,43342,906 lb.) Full-turn tipping load: 13 29916 946 kg (29,31937,360 lb.) Configurations: Z-Bar and High-Lift

824K Loader 248 kW (333 net hp) @ 1,600 rpm Operating weight: 26 21026 714 kg (57,78358,894 lb.) Bucket capacity range: 4.65.2 m3 (6.06.75 cu. yd.) Breakout force: 17 49618 905 kg (38,57241,678 lb.) Full-turn tipping load: 14 52717 588 kg (32,02738,775 lb.) Configurations: Z-Bar and High-Lift

844K Loader 283 kW (380 net hp) @ 1,600 rpm Operating weight: 31 79232 538 kg (70,08971,734 lb.) Bucket capacity range: 4.86.2 m3 (6.38.1 cu. yd.) Breakout force: 19 31221 709 kg (42,57647,860 lb.) Full-turn tipping load: 19 58320 282 kg (43,17344,713 lb.) Configuration: Z-Bar

PAGES 3031

Landscape Loaders

Not your garden-variety loader tractors.

If you think our 210LJ is just another grading tractor with yellow paint, think again. Its unitized mainframe, integral three-point hitch, and construction-grade loader give it uncommon stamina and strength. Equip one with an available cab and PTO, and take on an even wider variety of work. If you need something a little smaller, opt for the 110 Tractor Loader. Either way, youll experience the same great product support youve come to expect from John Deere.
www.JohnDeere.com/landscapeloader

110 Tractor Loader Backhoe 30.6 kW (41 net hp) @ 2,600 rpm Typical operating weight: 3667 kg (7,600 lb.) Loader breakout force: 17.6 kN (3,965 lb.) Loader lifting capacity: 926 kg (2,042 lb.) Backhoe bucket size range: 305914 mm (1236 in.)

210LJ Landscape Loader 62.6 kW (84 net hp) @ 2,000 rpm Operating weight: 4140 kg (9,130 lb.) Bucket capacity range: 0.770.96 m3 (1.001.25 cu. yd.) Breakout force: 35.1 kN (7,900 lb.) Lifting capacity at full height: 2397 kg (5,280 lb.)

PAGES 3233

Motor Graders

So many options, one obvious choice.

Offering one-of-a-kind advantages and unequalled options, our grader lineup lets you decide how the work gets done. Choose from full-featured Grade Pro (GP) models with state-of-the-art fingertip armrest controls. Or opt for conventional lever-operated machines. In tandem- or six-wheeldrive configurations. Equipped with EPA IT4/EU Stage IIIB John Deere PowerTech diesels. Regardless of which you choose, these brawny blades come standard equipped with the same heavy-duty durability and uptime-boosting features, including an easy-access filter bank and simple-to-clean coolers.
www.JohnDeere.com/graders

670G/GP Motor Grader 108145 kW (145 195 net hp) Maximum operating weight: 21 228 kg (46,800 lb.) Blade pull: 12 800 kg (28,220 lb.) Tandem drive Transmission: direct-drive John Deere PowerShift Plus

672G/GP Motor Grader 123145 kW (165 195 net hp) Maximum operating weight: 21 228 kg (46,800 lb.) Blade pull: 19 105 kg (42,120 lb.) Six-wheel drive Transmission: direct-drive John Deere PowerShift Plus

770G/GP Motor Grader 123183 kW (165 245 net hp) Maximum operating weight: 21 772 kg (48,000 lb.) Blade pull: 13 150 kg (28,990 lb.) Tandem drive Transmission: direct-drive John Deere PowerShift Plus

772G/GP Motor Grader 145198 kW (194 265 net hp) Maximum operating weight: 21 772 kg (48,000 lb.) Blade pull: 19 595 kg (43,200 lb.) Six-wheel drive Transmission: direct-drive John Deere PowerShift Plus

870G/GP Motor Grader 134198 kW (180 265 net hp) Maximum operating weight: 22 054 kg (48,620 lb.) Blade pull: 13 299 kg (29,320 lb.) Tandem drive Transmission: direct-drive John Deere PowerShift Plus

872G/GP Motor Grader 160211 kW (214 283 net hp) Maximum operating weight: 22 054 kg (48,620 lb.) Blade pull: 19 849 kg (43,760 lb.) Six-wheel drive Transmission: direct-drive John Deere PowerShift Plus

PAGES 3435

Skid Steers

Small wond Small wonders.

Loaded Loaded with custom o customer-inspired enhancements, our D-Series Skid Steers t ro Steers incorporate roomy operator stations, quiet pressurized cabs with i vis with best-in-class visibility, and curved-glass swing-out doors. You also have a num have a choice of numerous productivity-boosting options including H sel EH joysticks with selectable control pattern and variable boom and bucket u bucket speed-rate lim Need something smaller? Opt for a 313 or 315. limits. Lightweight g agi Lightweight and agile, theyre perfect for tight quarters and easy to transport a jo transport between jobsites.
www.JohnDeere.com/skidsteers www.Joh D J hnDeere.com

313 Skid Steer 33.5 kW (45 net hp) @ 2,400 rpm Operating weight: 2338 kg (5,150 lb.) Bucket breakout force: 9891498 kg (2,178 3,300 lb.) Tipping load: 1146 kg (2,525 lb.) Tires: 10 x 16.5 8 PR Extra Wall

315 Skid Steer 33.5 kW (45 net hp) @ 2,400 rpm Operating weight: 2361 kg (5,200 lb.) Bucket breakout force: 11081498 kg (2,440 3,300 lb.) Tipping load: 1362 kg (3,000 lb.) Tires: 10 x 16.5 8 PR Extra Wall

318D Skid Steer 43.3 kW (58 net hp) @ 2,300 rpm Operating weight: 2928 kg (6,450 lb.) Bucket breakout force: 2327 kg (5,125 lb.) Tipping load: 1634 kg (3,600 lb.) Tires: 10 x 16.5 8 PR Extra Wall

320D Skid Steer 47.1 kW (63 net hp) @ 2,300 rpm Operating weight: 2996 kg (6,600 lb.) Bucket breakout force: 2327 kg (5,125 lb.) Tipping load: 1816 kg (4,000 lb.) Tires: 12 x 16.5 10 PR SKS

326D Skid Steer 51.9 kW (70 net hp) @ 2,000 rpm Operating weight: 3689 kg (8,125 lb.) Bucket breakout force: 3519 kg (7,750 lb.) Tipping load: 2361 kg (5,200 lb.) Tires: 12 x 16.5 10 PR Extra Wall Electrohydraulic joystick controls available

328D Skid Steer 59.6 kW (80 net hp) @ 2,000 rpm Operating weight: 3814 kg (8,400 lb.) Bucket breakout force: 4676 kg (10,300 lb.) Tipping load: 2542 kg (5,600 lb.) Tires: 14 x 17.5 12 PR Extra Wall Electrohydraulic joystick controls available

332D Skid Steer 66.7 kW (89 net hp) @ 2,400 rpm Operating weight: 4163 kg (9,170 lb.) Bucket breakout force: 6299 kg (13,875 lb.) Tipping load: 2906 kg (6,400 lb.) Tires: 14 x 17.5 14 PR Hauler Electrohydraulic joystick controls available

PAGES 3637

Compact Track Loaders

Track Track stars.

Numerous Numerous customer-inspired enhancements make our D-Series CTLs u your o c your best choice. All four offer spacious operator stations, quiet pressurized cab u surized cabs with best-in-class visibility, and curved-glass swing-out doors. o doors. You also have a choice of several productivity-boosting options E including EH joysticks with selectable control pattern and variable boom o boom and bucket speed-rate limits. If you need a smaller CTL, choose the h the CT315. With best-in-class stability, breakout force, visibility, and service acc e service access, it helps you do more, more reliably, for less.
www.JohnDeere.com/ctls www.JohnD ww JohnD

CT315 Compact Track Loader 33.5 kW (45 net hp) @ 2,400 rpm Tipping load: 2003 kg (4,412 lb.) Rated operating capacity: 681 kg (1,500 lb.) at 35-percent tipping load / 1002 kg (2,206 lb.) at 50-percent tipping load Bucket breakout force: 9891498 kg (2,178 3,300 lb.)

319D Compact Track Loader 43.3 kW (58 net hp) @ 2,300 rpm Tipping load: 2540 kg (5,600 lb.) Rated operating capacity: 863 kg (1,900 lb.) at 35-percent tipping load / 1270 kg (2,800 lb.) at 50-percent tipping load Bucket breakout force: 2327 kg (5,125 lb.)

323D Compact Track Loader 47.1 kW (63 net hp) @ 2,300 rpm Tipping load: 3257 kg (7,175 lb.) Rated operating capacity: 1041 kg (2,295 lb.) at 35-percent tipping load / 1634 kg (3,600 lb.) at 50-percent tipping load Bucket breakout force: 2542 kg (5,600 lb.)

329D Compact Track Loader 59.6 kW (80 net hp) @ 2,000 rpm Tipping load: 3765 kg (8,300 lb.) Rated operating capacity: 1317 kg (2,900 lb.) at 35-percent tipping load / 1882 kg (4,150 lb.) at 50-percent tipping load Bucket breakout force: 4688 kg (10,325 lb.)

333D Compact Track Loader 66.7 kW (89 net hp) @ 2,400 rpm Tipping load: 4279 kg (9,425 lb.) Rated operating capacity: 1498 kg (3,300 lb.) at 35-percent tipping load / 2145 kg (4,725 lb.) at 50-percent tipping load Bucket breakout force: 6299 kg (13,875 lb.)

PAGES 3839

Waste-Handler Loaders

M Move waste with haste.

The These loaders are fortified to tackle even the toughest transfer-station h duti u duties. Extensive guarding keeps run-ins with obstacles from trashing mac machine uptime, and state-of-the-art electronics deliver long-term relia e reliability. To keep things cool, hydraulically driven fans in the QuadCoo o Cool system reverse automatically to blow away airborne trash. And n And the K-Series unrestricted visibility, low-effort controls, and com o comfortable cab help ease taking out the trash.
www.JohnDeere.com/waste ww

524K Waste-Handler Loader 110 kW (146 net hp) @ 2,000 rpm Operating weight: 15 37115 563 kg (33,88734,311 lb.) Bucket capacity range: 3.1 m3 (4.0 cu. yd.) Dump clearance with bucket, standard Z-bar: 2.63 m (8 ft. 7 in.) Dump clearance with bucket, high-lift Z-bar: 3.03 m (9 ft. 11 in.)

544K Waste-Handler Loader 125 kW (167 net hp) @ 1,900 rpm Operating weight: 15 87916 206 kg (35,00835,729 lb.) Bucket capacity range: 3.13.8 m3 (4.05.0 cu. yd.) Dump clearance with bucket, standard Z-bar: 2.552.69 m (8 ft. 4 in. 8 ft. 10 in.) Dump clearance with bucket, high-lift Z-bar: 2.993.11 m (9 ft. 10 in. 10 ft. 2 in.)

624K Waste-Handler Loader 147 kW (198 net hp) @ 1,800 rpm Operating weight: 17 42017 939 kg (38,40439,549 lb.) Bucket capacity range: 3.14.6 m3 (4.06.0 cu. yd.) Dump clearance with bucket, standard Z-bar: 2.612.77 m (8 ft. 7 in. 9 ft. 1 in.) Dump clearance with bucket, high-lift Z-bar: 2.983.25 m (9 ft. 9 in. 10 ft. 8 in.)

644K Waste-Handler Loader 173 kW (232 net hp) @ 1,700 rpm Operating weight: 21 24722 043 kg (46,84248,596 lb.) Bucket capacity range: 3.85.4 m3 (5.07.0 cu. yd.) Dump clearance with bucket, standard Z-bar: 2.692.96 m (8 ft. 10 in. 9 ft. 8 in.) Dump clearance with bucket, high-lift Z-bar: 3.213.45 m (10 ft. 6 in. 11 ft. 4 in.)

724K Waste-Handler Loader 197 kW (264 net hp) @ 1,800 rpm Operating weight: 22 22023 036 kg (48,98850,786 lb.) Bucket capacity range: 3.85.4 m3 (5.07.0 cu. yd.) Dump clearance with bucket, standard Z-bar: 2.692.96 m (8 ft. 10 in. 9 ft. 8 in.) Dump clearance with bucket, high-lift Z-bar: 3.213.45 m (10 ft. 6 in. 11 ft. 4 in.)

744K Waste-Handler Loader 227 kW (304 net hp) @ 1,500 rpm Operating weight: 29 17330 057 kg (64,31566,263 lb.) Bucket capacity range: 4.66.1 m3 (6.08.0 cu. yd.) Dump clearance with bucket, standard Z-bar: 2.792.99 m (9 ft. 2 in. 9 ft. 10 in.) Dump clearance with bucket, high-lift Z-bar: 3.523.69 m (11 ft. 7 in. 12 ft. 1 in.)

PAGES 4041

Waste-Handler Dozers

Purpose b Purpose built to handle waste.

Our Our waste-handler dozers are engineered specifically to meet the u challenges moving h challenges of movi solid waste. Anything susceptible to damage has a m has been sealed, moved, rerouted, or reengineered to keep trash and damage a And damage at bay. And, these dozers come standard with a reversing fan that h that automatically blows away refuse. Keep cool, clean, and productive with i w with a John Deere waste-handler dozer.
www.JohnDeere.com/waste www.JohnDeere.co

850J Waste-Handler Dozer 137151 kW (185200 net hp) @ 1,800 rpm Operating weight: 20 26022 183 kg (44,66548,906 lb.) Undercarriage / blade configurations / blade capacity (with trash rack): WT w/ semi-U: 11.09 m3 (14.5 cu. yd.), WLT w/PAT: 9.71 m3 (12.7 cu. yd.), LGP w/PAT: 9.86 m3 (12.9 cu. yd.), and LGP w/semi-U: 11.62 m3 (15.2 cu. yd.)

950J Waste-Handler Dozer 184 kW (247 net hp) @ 1,600 rpm Operating weight: 26 518 kg (58,462 lb.) Blade capacity (with trash rack): semi-U blade: 16.65 m3 (21.8 cu. yd.)

1050J Waste-Handler Dozer 250 kW (335 net hp) @ 1,600 rpm Operating weight: 36 726 kg (80,967 lb.) Blade capacity (with trash rack): semi-U blade: 19.79 m3 (25.8 cu. yd.) / U blade: 25.05 m3 (32.8 cu. yd.)

PAGES 4243

Scraper Tractors

Give your earthmoving operations more pull.

If you make your living moving dirt, you wont find a better investment for pulling heavy-duty scrapers, disks, oversized rollers, heavy rippers, or water tanks. Our Scraper Special four-wheel-drive tractors feature spacious and quiet cabs, heavy-duty frames and axles, and 18-speed PowerShift transmissions. Plus, theyre backed by a two-year/2,000hour full factory warranty and unsurpassed dealer support.
www.JohnDeere.com/scrapertractors

9430 Scraper Special 317 kW (425 net hp) @ 2,100 rpm Scraper package with front and rear axle supports, heavy-duty drawbar support, heavy-duty oscillation joint, beacon, backup alarm, 18-speed trans-mission, and heavyduty wheel hubs Major options: 284-L/min. (75 gpm) hydraulic system, weights, ActiveSeat (industry exclusive), and tires Two-year/2,000-hour full factory warranty; additional warranty available

9530 Scraper Special 354 kW (475 net hp) @ 2,100 rpm Scraper package with front and rear axle supports, heavy-duty drawbar support, heavy-duty oscillation joint, beacon, backup alarm, 18-speed trans-mission, and heavyduty wheel hubs Major options: 284-L/min. (75 gpm) hydraulic system, weights, ActiveSeat (industry exclusive), and tires Two-year/2,000-hour full factory warranty; additional warranty available

9630 Scraper Special 395 kW (530 net hp) @ 2,100 rpm Scraper package with front and rear axle supports, heavy-duty drawbar support, heavy-duty oscillation joint, beacon, backup alarm, 18-speed trans-mission, and heavyduty wheel hubs Major options: 284-L/min. (75 gpm) hydraulic system, weights, ActiveSeat (industry exclusive), and tires Two-year/2,000-hour full factory warranty; additional warranty available

PAGES 4445

Scrapers

Mo Move material at a lower cost per yard.

All 10 of these construction-grade American-made pull-type scrapers 1 are b r are built to save you money and maximize uptime. Cut widths range from 3.04 3.048 to 4.42 m (10 to 14.5 feet), with heaped capacities from 11.5 to 16.7 6 16.7 m3 (15 to 21.5 cubic yards). The AutoLoad option automates the scrap c scrapers hydraulic-lift function by varying the blade height to maintain cons o consistent loads, cut profiles, and maximum productivity. Once engaged, even first-time operators will load like pros. v even
www.JohnDeere.com/scrapers www

Ejector Style 1512E: 11.9-m3 (15.5 cu. yd.) capacity, 3.658-m (12 ft.) cut 1810E: 14-m3 (18.3 cu. yd.) capacity, 3.2-m (10 ft. 6 in.) cut 1814E: 13.8-m3 (18.0 cu. yd.) capacity, 4.42 m (14 ft. 6 in.) cut 2112E: 16.1-m3 (21.0 cu. yd.) capacity, 3.658-m (12 ft.) cut Optimum blade and bowl design for maximum productivity

Two-position router bits, and several edge patterns for different soil conditions Zinc-coated hydraulic lines and ORFS fittings GPS/laser racks, rear bumpers, and drawbar and scraper-to-scraper quickattach hitches available Six-month warranty (more available) 2428-percent scraper tongue weight distribution

Exclusive AutoLoad system available Push-loading approved Brakes available on 13.8- and 16.1-m3 (18 and 21 cu. yd.) models

Carry-all Style 1510C: 11.5-m3 (15.0 cu. yd.) capacity, 3.048-m (10 ft.) cut 1512C: 11.9-m3 (15.5 cu. yd.) capacity, 3.658-m (12 ft.) cut 1810C: 13.8-m3 (18.0 cu. yd.) capacity, 3.048-m (10 ft.) cut 1812C: 13.8-m3 (18.0 cu. yd.) capacity, 3.658-m (12 ft.) cut 1814C: 13.8-m3 (18.0 cu. yd.) capacity, 4.267-m (14 ft.) cut

2112C: 16.7-m3 (21.5 cu. yd.) capacity, 3.658-m (12 ft.) cut Optimum blade and bowl design for maximum productivity Two-position router bits, and several edge patterns for different soil conditions Zinc-coated hydraulic lines and ORFS fittings GPS/laser racks, rear bumpers, and drawbar and scraper-to-scraper quickattach hitches available

Six-month warranty (more available) 2428-percent scraper tongue weight distribution Exclusive AutoLoad system available Push-loading approved Brakes available on 13.8- and 16.1-m3 (18 and 21 cu. yd.) models

PAGES 4647

WorkSight Solutions

For every worksite problem, theres a WorkSight Solution.

We listen to our customers and respond with solutions that increase productivity and uptime while lowering daily operating costs. JDLink, Fleet Care, and Service ADVISOR Remote are three separate tools that make your work easier in different ways. But the ultimate power comes from all three working together, turning machine data into time-boosting solutions WorkSight Solutions.

Control your fleet from your seat with JDLink

We cannot overemphasize the importance of JDLink as the gateway application for wireless machine management. These John Deere-exclusive telematic systems allow you to instantly access fuel information, utilization, location, maintenance planning, machine alerts and more anywhere you log onto the Internet. Although there are JDLink systems that can be used with non-Deere equipment, these systems are the only telematics designed by an equipment manufacturer. JDLink is standard equipment on many current and late-model John Deere machines, so you may already have access to this valuable data.

This exclusive machine health solution analyzes JDLink, inspection, and fluid data, and tells you what to do to make your equipment run better. Longer. And at lower cost. Fleet Care is like an apple a day for the health of every machine in your fleet.

Service ADVISOR Remote delivers big-time uptime

Its likely youre familiar with the decade-old Service ADVISOR. Its the original John Deere laptop-based diagnostic tool that technicians plug directly into a machine. Now, with Service ADVISOR Remote, your tech can read diagnostic trouble codes, record performance data, and even update software anyplace theres Internet access. All you need is an active JDLink subscription. Using Service ADVISOR Remote, dealer technicians will know what action needs to be taken before they leave the shop, so they can arrive with a replacement part in hand or update software without a trip to the jobsite.

It thinks, therefore its Fleet Care

This revolution in proactive machine maintenance actually thinks through potential downtime symptoms before prescribing cures to keep your bottom line fit. It even delivers advisories directly to your email inbox.

JDLink wireless communication system available in specic countries; see your dealer for details.

PAGES 4849

C Customer Customer Personal Service (CPS)

Its all Its all about you. t

In many way were defined by you, our customers. Youre the ones putting many ways, any our equipme through its paces day after day. You know what works our equ pm equipment a and t needs improvement. With your input, we have developed CPS and what ne an evolving ving an evolving lineup of programs that can be adapted to your specific needs, co g the covering the life cycle of your equipment, and helping you manage your operating costs. n operating co Many CPS applications can even be used on non-John Deere e equipmen ent. equipment. From comprehensive support programs that help you get the most from your equipment, to equipment simulators that help train your o most from y op operators, were all about supporting your efforts. r operators, w
www.JohnDe www.JohnDeere.com/support w

Extended Coverage
Flexibility is the key to CPS. Extended Coverage warranty lets you custom-fit coverage to your needs, giving you a fixed cost for machine repairs over a given period of time. Whether you work in a severe-service operation or just want to spread the risk of doing business, Extended Coverage warranty is a great way to protect your cash flow. An Extended Coverage warranty also travels well because its backed by the John Deere Construction & Forestry Company and honored by all John Deere Construction & Forestry dealers.

Remanufactured components
Get like-new performance for a fraction of the price. Each transmission, axle, engine, hydraulic pump, motor, cylinder, control valve, rotary manifold, fuel-injector nozzle, or directional-control valve helps avoid downtime if its installed before the old component fails. Each unit is remanufactured to the OEMs specs with certified parts, tested for leaks and performance, and backed by a one-year/1,500-hour warranty for parts and labor when dealer installed.

Component life cycle

CPS is dedicated to extending the life of your equipment. Through vital information on the projected life spans of machine components, you can make informed decisions on machine maintenance. Depending on sample data, fluid life may be extended with Super Caddy a sophisticated filtering tool. CPS shares information with you to extend the performance and longevity of machine components while keeping daily operating costs low.

Condition Based Maintenance (CBM)

JDLink, fluid analysis, and actual work environment data CBM delivers all the analytical tools you need to squeeze every possible hour out of each machine in your fleet. It saves you money by recommending service intervals based on actual environmental, operating, and fluid conditions. A key component of our proactive Fleet Care machine health program, CBM relies on data that helps predict and prevent machine issues so you can enjoy maximum productivity and uptime. Youll extend machine life and optimize uptime while reducing daily operating costs.

Reman Reload
Because youre looking to squeeze maximum value from every machine in your fleet, you can now outfit your large production loaders with remanufactured John Deere powertrains that deliver long and reliable machine life. These powertrains are backed by a three-year/5,000-hour transferrable warranty.

PAGES 5051

Customer Personal Service (CPS)

Planned Maintenance (PM) Agreements
Keeping you up and running is the ultimate goal of CPS, and ensuring timely maintenance work through our PM Agreements is the key to this mission. PM Agreements rely on advanced maintenance programs like Fleet Care a revolutionary service that thinks through JDLink machine data, fluid samples, and machine inspection data to recommend in simple terms the best methods to proactively control machine health, uptime, and longevity.

Maximum Life Undercarriage

Exclusive SC-2-coated bushings deliver as much as twice the wear and may eliminate a bushing turn. Order SC-2 bushings for your Deere and non-Deere crawlers. Or opt for the John Deere Maximum Life Undercarriage with SC-2 bushings, larger components, and improved seals for a 57-percent per-hour cost savings over standard sealed and lubed track. Ask your dealer about our wear-assurance programs that offer up to 6,000 hours of coverage on any new machine with SC-2-coated bushings or a Maximum Life Undercarriage.

Fluid Analysis
Fluid Analysis aims to drastically reduce catastrophic downtime, extend drain intervals, and save you money. Its an important part of Customer Personal Service when packaged with an Extended Coverage warranty and a PM Agreement. Fluid Analysis is a proactive approach to machine maintenance that gives you data on all your machines major components in time to take action.

Certified customer support

Customer Support Advisors, Parts Advisors, and Service Technicians are certified to have the knowledge and skills to help make important decisions on machine maintenance and repair. They understand your business and will help you customize a plan that meets your specific needs.

Wear parts
John Deere offers the most innovative line of wear parts in the business Fanggs teeth, Stinger scarifier blades, Jagz edges, Guardian poly edges, and Swampers poly teeth. Each of these wear parts lets you work smarter and increase profits. And now you can put the hammer down with the new TK-Series. These TK-Series bucket teeth combine the popular Fanggs design with easy hammer-free installation. These wear parts let you work smarter and increase profits.

Web bookstore
The John Deere online bookstore, www.jdtechinfo.com, is the central location for John Deere Construction, Forestry, and Hitachi technical information. Information is available in print, on CD/DVD, or as a downloaded PDF. There is also a technical support call center that provides product guidance and order assistance.

Forestry wear parts

Saw teeth, blades, and chains are key to maximizing performance in the woods. John Deere has a full line of quality saw products you can count on to cut faster and last longer. For high-impact jobs, choose tools made from heat-treated steel. For jobs with abrasive conditions, we offer carbide-tipped tools. And, for wheeled and tracked feller bunchers, Extended-Life saw teeth are now available.

Customer Personal Service Online

CPS Online is a pathway to the most precious commodity of all information. Its a secured Web site that links you to your machine specs and owning and operating costs. Self-register on CPS Online and you can order technical manual CD-ROMs, email your dealer, and research part specifications for non-John Deere equipment. You can access through the contractors or loggers pages on JohnDeere.com.

Parts availability
When a piece of equipment goes down, losses go up. Thats why weve dramatically boosted our parts availability. And increased our parts locations and moved them closer to where youre working. Now you can rely on service and maintenance parts when you need them. Overnight. For faster and more timely parts delivery, call on John Deere. And get back to work.

Operator and tech training

The John Deere Training Center has transformed customer needs into a valuable curriculum with three efficient avenues of learning: 1) electronic media via the Internet, 2) state-of-the-art operator-training simulators, and, 3) expert instructors in a classroom setting. Through the Training Center you can educate your employees, boost productivity, and promote safety while dramatically reducing your operating expenses.

PAGES 5253

Flexible nancing that works as hard for you as your equipment.

No two contractors are exactly alike. Thats why we listen to your specic needs and respond with solutions and terms most benecial to you. Well meet your changing needs and continue to provide easy access to exible nancing throughout the good and tough times. From straightforward documentation, to quick turn time, to exible terms, were committed to your satisfaction, growth, and enduring success.

Retail installment loans:

New and used equipment nancing. Easy-to-understand documentation. Simple interest. No blanket liens. Online account access at www.MyJDFAccount.com (U.S. only). Physical damage insurance is available and can be nanced (U.S. only). Flexible down payments, alternative collateral, skip payments, and more.

More than just equipment nancing:

For John Deere customers in the United States, we also offer PowerPlan, a revolving credit plan for parts, service, attachments, rentals, and more.

PowerPlan benets (U.S. only):

Easily manage owning and operating costs. Our Major Purchase Option offers xed rates, terms, and payments on PowerPlan purchases of parts, service, equipment, and attachments over $3,000. PowerPlan is accepted at more than 400 U.S. locations. Access your account online. PurchaseTrak annual purchase summary helps you keep track of your purchases throughout the year. Contact your dealer for more information, or contact a Construction & Forestry marketing representative by calling our customer service line at 800-771-0681 (U.S.) or 800-321-3766 (Canada).

Leasing:
Simple documentation. Multiple end-of-lease options. Residual values can be stated or set at fair market value. Match hours and terms to specic jobs. Less money up front and lower payments in most cases than other nance options. Potential tax benets.*

*Consult your tax advisor.

CR2210824

www.JohnDeereFinancial.com
PAGES 5455

DKD1096 Litho in U.S.A. (11-03)