Roadtec SB 2500 Specs
Roadtec SB 2500 Specs
Roadtec SB 2500 Specs
SB-2500B SPECIFICATIONS
ENGINE: FUME EXTRACTION SYSTEM: PAVER LOADING (C-3):
John Deere™ 6081 AF, 6-cylinder diesel engine, 275 Two blowers. Fold-down 10" (254 mm) exhaust Conveyor swings 55 degrees to either side of
HP (206 kw) @ 1,900 rpm. Engine instrumentation pipes. center. Maximum conveyor discharge height is 12'
includes tach/hour meter, oil pressure, voltage and 2' (3.7 m) from ground level. Conveyor flights
emergency shutdown system. Easy access to oil SLAT CONVEYORS welded to the chain are 5/8" (16 mm) thick, 3" (76.2
cooler/radiator. TRUCK UNLOADING (C-1): mm) wide and 30" (762 mm) long. Conveyor has
High-capacity truck unloading system with low bolted 1/2" (12.7 mm) T-1 replaceable floor plates
OPERATOR’S STATION: deck height, 9’2" (2.8 m) side truck opening and 29" and doors. C-2 and C-3 conveyors have on/off
Operator positions on both sides. Control panel (737 mm) o.d. x 7" (178 mm) deep Ni-Hard seg- controls that are interlocked. Conveyor capacity is
pivots for use from either station allowing for same- mented converging auger for quick material flow. 600 TPH (544 MTPH).
lane or adjacent-lane operation from either side. Conveyor has weld-on flights 5/8" (16 mm) thick,
One-piece hydraulically-raisable platform allows easy 7" (178 mm) wide x 58" (1,473 mm) long. Ni-Hard HOPPER INSERT:
access to engine, pumps and motors. Inside turning liner plates are removable. Power dump front hop- A mass-flow paver hopper insert is used to increase
radius 26’6" (8.1 m). per has a vibrator on the bottom that helps keep the hopper capacity of a conventional paver when
material moving. Fixed push roller is standard. used with the SB-2500B.
GROUND DRIVE: Conveyor capacity is rated at 1,000 TPH (907
All hydrostatic for continuously variable speed con- MTPH). CAPACITIES:
trol with two speed ranges. Electric-over-hydraulic Fuel tank............................................150 gal (568 l)
shift between working and transport ranges. Maxi- SURGE BIN (C-2): Hopper............................................25 tons (22.7 MT)
mum speed (working range) 3.0 mph (4.8 kph). Unloads the surge bin with a multi-pitch 29" (737 material....................120 lbs/cu ft (1,922 kg/cu m)
Maximum speed (travel range) 9 mph (14.5 kph). mm) o.d. x 7" (178 mm) deep Ni-Hard segmented
anti-segregation auger in the hopper. Conveyor WEIGHTS:
TIRES: system has weld-on flights 5/8" (16 mm) thick, 7" Shipping weight...................79,300+ lbs (35,970 kg)
Large, high-flotation - 21:00 x 25" (53.3 m x 635 mm). (178 mm) wide x dual 16" (406 mm) long. Liner
plates are Ni-Hard and removable. Conveyor ca- OPTIONS:
ELECTRICAL SYSTEM: pacity is 600 TPH (544 MTPH). Spray down system
Standard system includes heavy-duty alternator, Hydraulic generator set
battery, and circuit breaker protection of all systems. Windrow attachment
Road widener attachment