The wonder

of winter
Tatiana Baldina chip carves
an intricate snowflake design

TECHNICAL ADVICE Guide to sharpening an adze • Selecting timber

PROJECTS TO CARVE Whale puzzle • Holly candleholder • Skiing tomte
• Starfish • Mouse • Gibbons-style stone carving • Crab bowl • Trivet
 Stay Sharp with Flexcut ®

Carvin’ Jack Collection®

carvin’
jack ®
pocket
jack
jac ®
tri-jack
pro ®
whittlin'
jack ®

• Sleek design • Wood inlay

• 3.5 ounces, closed • Gouge Scorp • Roughing Knife
length of 4-1/4” • Straight Gouge • Detail Knife
• Comes with leather belt • Detail Knife • Cutting Knife
mounted sheath
• Right-handed or
left-handed versions
• V-Scorp, Gouge Scorp,
Straight Gouge, Chisel, • Walnut inlay
Detail Knife, Hook Knife • Roughing Knife
• Detail Knife

SlipStrop ®

• Economical way to maintain your

tool’s razor edge.
• Specially moulded to let you polish and deburr hard-to-
reach areas such as the inside of V-tools and gouges as
well as outside edge bevels. Knife Strop ®

• Strop comes with a 1-ounce bar of Flexcut Gold • 8” x 2” leather stropping surface to help
polishing compound and detailed instructions. keep your knife blades razor sharp.
• A flat, sturdy construction, the strop can be
clamped or handheld.
Reciprocating • The knife strop comes with a 1-ounce bar of
Flexcut Gold polishing compound.
Gouges
• 14 blades let your
power carver work less
and carve more.
• Sturdy wooden box.
• They work great with the
power off too!.

To find your nearest Flexcut stockist,

visit brimarc.com or call 03332 406967
Welcome

PHOTOGRAPH BY DAVE WESTERN

his year is steaming ahead like a runaway train, and it has thrown much in the world to explore that will give us inspiration for our carvings.

T up more challenges than even 2020 did. We have continuing

restrictions due to the coronavirus, fuel shortages have made travel
and deliveries difficult, and a delicate economy has made us nervous
to spend money. Hopefully by the time you read this some of these
William Barsley introduces us to the carvers of Bali and the beautiful
things that inspire them to create their amazing carvings. Perhaps while
on a holiday in an exotic place you will see starfish and crabs on the beach.
If you can't make to some sun kissed oceanside destination we show you
things will have diminished and we are on the path to leading a relatively projects that feature each of these creatures. A more local creature is the
normal life. Christmas will be upon us again soon and we can hopefully mouse, and we have a project to carve one of those too...along with a piece
celebrate this time of year with our friends and family. To help you get of cheese. You could place the mouse on a shelf perhaps, to play a trick
in the mood and prepared early, we have featured a couple of festive on someone and see if they jump on a chair screaming like a character
projects that you can carve to decorate your home or even to give as in Tom and Jerry. Letter carving is a precise skill and forming the letters
gifts. The holly candle holder will look great in anyone's living room takes skill and patience. However, imagine after you have invested all this
and skiing Santa will bring a smile to everyone's face. Carving wood, time to create a perfectly worded plaque or other lettered work you look
as you know, is an immensely satisfying and therapeutic pastime down and see what you have carved is spelled incorrectly. We show some
but have you ever considered carving a different material like stone? hilarious examples of spelling bloopers that emphasise the importance
It isn't as difficult as you might think, and we explore the design of of checking and double checking your spelling, so you have no regrets.
Grinling Gibbons to give inspiration for all who want to give it a try. If There is all this and much more in this issue of Woodcarving.
you are set on wood carving, then we have an informative article on
selecting the timber you can use and where you might find it. If you As always, we love to see what you’ve been carving, so please
want to stick to, or explore, old-school tools read about sharpening an email photos of your work to WCeditorial@thegmcgroup.com.
adze for hollowing, you could make yourself a nice bowl from a section Happy carving
of tree. Travelling is becoming an option again for us and there is so Alan Goodsell

WOODCARVING 184 1
 16 10

PROJECTS TECHNIQUES
4 Gibbons-style stone carving 44 Selecting timber for carving
Steve Bisco explores the lesser-known Steve Bisco shows what defects to look out
stone work of the celebrated carver, for when choosing wood for projects
Grinling Gibbons
54 Sharpening clinic – adze you like it
10 Sperm whale puzzle Nic Westermann sharpens an adze
Cedric Boyns solves the task of creating
this oceanic toy 62 The wonder of winter
The intricate design of a snowflake makes
16 Star of the show for an absorbing chip carving project, by
John Samworth concentrates on Tatiana Baldina
the intriguing and ancient starfish
as a centrepiece 74 Check and double check
Kevin Alviti displays his error as a 76
28 Christmas sport cautionary tale
Peter Benson takes to the slopes with
this mischievous skiing figure of a
Swedish tomte

32 Holly candleholder
Dave Western gets into the Christmas
spirit with this seasonal table decoration

48 Carved trivet
A burnt ring on a table tells many stories
for Kevin Alviti…

58 Cherry crab bowl

The shape of this common crustacean
lends itself perfectly to a bowl decoration,
says Zoë Gertner

76 Moveable mouse
Peter Keene has some fun with an
inquisitive rodent

28

2 WOODCARVING 184
 WOODCARVING 184

FEATURES COMMUNITY
22 Soar like an eagle! 1 Welcome
Chainsaw carver Paul Waclo An introduction to the latest issue of
tells Woodcarving about his Woodcarving
life and work
27 Subscribers
68 Carving countries Find out about our latest subscription offers
William Barsley visits the
carvers of Bali 38 BDWCA news & events
The latest news from the association for
80 St Elizabeth’s Cathedral, Kosice Bird carvers
This month we visit the easternmost
Gothic cathedral in Europe 42 From the community
A collection of letters and news from the
16 woodcarving community

47 Next issue
Can’t wait to see what’s in store for the next
issue of Woodcarving? We reveal a sneak
peek at what to expect

58 68

WOODCARVING 184 3
Gibbons-style
stone carving
Steve Bisco explores the lesser-known stone work of the celebrated carver

rinling Gibbons (1648-1721), whose tercentenary we have been lime wood foliage style to stone, but the problem lies in the material.

G celebrating in 2021, is famous as the carver of the magnificent

lime wood foliage festoons that graced the palaces and grand
houses of late 17th-century England. But when Queen Anne came
to the throne in 1702, she preferred plainer interior decorations,
Stone is very different to lime wood. It is hard and brittle and has no
tensile strength, so the deeply undercut and open style of Gibbons’
woodcarvings is not fully achievable in stone. It could be said that
Gibbons’ mistake was to even try to transfer this style to stone. Having
and Gibbons’ magnificent woodcarvings went out of fashion. tried, he succeeded to an extent that few others could have achieved.
Fortunately, he still had a large contract in place with Sir As I carve in both wood and stone, and have carved several
Christopher Wren on the internal and external decoration of Gibbons-style lime wood festoons, I thought I would try following
St Paul’s Cathedral as it neared completion, but the lime wood his path to see how his style adapted to stone. In stone carving the
foliage carving on which his woodcarving workshop depended stone is generally removed by the ‘percussion’ method of hammer
started to dry up so, to adapt and survive, he expanded the stone and chisel, but in thin sections this carries a high risk of fracturing
carving side of his business. The bulk of his stone carving work the stone. To achieve the degree of sharpness, undercutting, and
was in funerary monuments, but the St Paul’s contract included separation that Gibbons did without breaking up the stone, I believe
a good amount of stone carving on the exterior (see later). he would have adapted woodcarving tools and methods to carve
It has been said that Gibbons’ stone carvings didn’t have the flair the final details, pushing the gouges by hand pressure, which can
of the woodcarvings that had made him famous, but I think that is be done on freshly-quarried Portland stone. This is what I have
not entirely fair. It is true he didn’t excel at carving human figures, done with this small project, using the same Portland stone. It is
and in his funerary monuments he left most of this to specialists. not a job for the faint-hearted, but even if you don’t feel ready to
He did, however, manage to transfer much of the design flair of his give it a go yourself, I hope you will enjoy following the process.

4 WOODCARVING 184
 GIBBONS-STYLE STONE CARVING PROJECT

Things you will need

Materials: Woodcarving tools:
• A block of Portland limestone, 330 x 280 x 150mm • 8mm flat chisel
(this will weigh around 35kg so take care with lifting) • 30mm flat chisel
• 25mm No.6 gouge
Stone carving tools: • 8mm No.7 gouge
• Chisels – 4mm, 6mm, 13mm, 18mm; 13mm bullnose • 6mm V-pointed chisel
• Gouges – 6mm, 13mm, 18mm
• Mason’s dummy mallet
• Claw chisel
• Bolster

PORTLAND STONE
The stone quarries on the Isle of Portland in Dorset sit on the south coast of England across the Channel from the Caen stone quarries
on the French coast about 80 miles away. Between them they produce some of the best carving stone in the world. In medieval times
Caen stone was the main stone used for the great cathedrals of England and France, but by the 17th century Portland had become the
main provider of stone for the great classical buildings of London. It was much favoured by Sir Christopher Wren, who was rebuilding
the churches of London, including St Paul’s Cathedral, after the Great Fire of 1666. Consequently, it was the stone used by Grinling
Gibbons for his carvings at St Paul’s. It is a fine limestone, light grey in colour, that is moderately ‘soft’ to carve when freshly quarried.
It is not as easy to carve as Caen stone, but is more durable against erosion when subjected to centuries of weather and pollution.

SOURCING STONE
The best place to look for good quality carving stone is at the yard of an architectural stonemason. Look on the internet for your nearest supplier.
→
WOODCARVING 184 5
GRINLING GIBBONS SET IN STONE
Gibbons’ stone carvings on the exterior of St Paul’s Cathedral disturbing cherub heads are also much in evidence on this
in London exhibit many of the features we are familiar with ecclesiastical building. Anyone familiar with his wood carvings
in his lime wood foliage festoons – the wide variety of can instantly see his hand in these stone carvings. The only
naturalistic flowers, the swirling palm leaves, loose bunches concession made to the hard and brittle medium of
of grapes and peaches, oak leaves and acorns, even ears of stone is the absence of layering and the high-flying
wheat and his ‘trademark’ pea pods. His distinctive and rather detached stems of his lime wood festoons.

Gibbons stone carving panel at St Paul’s Cathedral Gibbons stone carving on a gate column at St Paul’s Cathedral

STONE CARVING TOOLS

Today we can buy a fairly limited range of stone carving and of special woodcarving tools made for his lime wood foliage
woodcarving tools from a fairly small number of suppliers, work, and he no doubt also had a wide range of stone carving
so we have to work with what we can get. In Gibbons’ day, tools made to suit his particular needs. They would have looked
carvers had all their tools made locally by a blacksmith, so they much like woodcarving tools, and to get nearer to the finish on
could have any tool they wanted made to their own specification Gibbons’ stone carvings I have ‘repurposed’ some woodcarving
to suit their own work. Gibbons is known to have had hundreds tools in the way I think Gibbons would have used them.

Standard stone carving tools used for this project Old woodcarving tools ‘repurposed’ for this project

CARVING STONE SAFELY BREAKAGES

• Wear eye protection when carving stone - flying stone chips Stone can be fragile and unpredictable, so always carve
are sharp! carefully to avoid breakages, but if a disaster occurs you can
• Stone is very heavy. A cubic foot, or 300mm metric cube, save the job by using PVA masonry sealer/adhesive. Retrieve
of stone will weigh around 70 kilos, so take great care of your back the broken piece of stone, vacuum off all the dust from the
and wear protective footwear. Use lifting gear for heavy pieces. joining surfaces, and glue the broken piece back in place.
• Stone carving creates a lot of dust, so work outdoors if possible.
Wear a dust mask, and take particular care if working with Gaps can be filled by mixing a paste of stone dust and PVA.
sandstone as silica dust can accumulate in the lungs. Re-carve the surfaces to get an almost invisible repair.

6 WOODCARVING 184
PHOTOGRAPHY BY STEVE BISCO GIBBONS-STYLE STONE CARVING PROJECT

PREPARATIONS
1 Get a piece of limestone around 330 x 280
x 150mm and make a full-size copy of the
drawing to fit your block. Getting stone cut to
size is expensive, so work with the nearest size
of offcut you can get from your stone supplier
and tailor the project to fit it. For authenticity
I have used Portland stone, as Gibbons did,
but Caen stone would be easier to carve.

2 Draw a line around the sides of the block

75mm down from the top edge. This will be the
baseline for the carving. If the block is dry and
clean, you can trace the pattern on to the stone
with carbon paper. It may be a bit faint but
should be visible (if it is not you should trace
1 2 templates for each element and draw round
them). To help with visibility, draw round
the main elements with a red wax pencil.

ROUGHING OUT
3 First we must rough out the outline
shapes and levels of the elements, starting
by removing the stone outside the pattern
area down to the level of the baseline.

4 Next we must reduce the level of the

lower elements like the wheat ears,
peas, oak leaves, crocuses and the small
flowers to around 30mm above the
background. This leaves enough stone to
get some rise and fall in the carving.

3
CARVING THE SMALLER
4 ELEMENTS
5 We can now focus on carving the smaller
elements, starting with the pea pods and
oak leaves in the bottom right. Carve the two
oak leaves and the tendril of the grapes at a
lower level than the peas. Carve the shape of
the three pea pods and very carefully carve
the peas using a 6mm stone gouge. Carve the
detail on the oak leaves with a bit of flick and
curl. Undercut all the elements as deeply as
you can with the standard stone carving tools.

6 On the lower left there is a complex

arrangement of wheat ears, crocuses and
small flowers that needs roughing out first.
It is best to ‘drill’ small hollows inside the
crocus flowers by rotating a 4mm stone
chisel into their centres while tapping
5 6 it gently before carving the outside.

7 Carve the individual wheat grains with

the 6mm gouge. Tilt the ears to the left
side and carefully undercut the edges.

8 Carve the petals on the crocus flowers and

carefully undercut inside the petals. We can
also carve and undercut the small round
flowers, but these will need further work
later when the large elements are carved.

7 8 →
WOODCARVING 184 7
9 Repeat these processes on the wheat
ear and flower in the top left…

10 …and on the crocuses and

small flower in the top right.

CARVING THE LARGE

ELEMENTS
11 With the background elements
carved, we can turn to the foreground
elements – the peaches, the grape bunch,
and the two large flowers. As these are
still at the full 75mm thickness of the
carving, they need to be roughed out
into their three-dimensional shapes.
The large hollow flower hanging
downwards in the centre should be 9 10
partially hollowed at this stage while
there is still plenty of thickness in the
stone to resist the outward pressure of
the hollowing. The hollowed dome shape
will withstand chiselling from the outside
much better than from the inside.

12 We can now carve and undercut the

two peaches. These must be rounded
and smoothed with the 13mm and
18mm flat chisels. The crease across the
top, which defines each of the fruits as
a peach, can be carved with the 6mm
chisel and gouge. The underside of each
fruit must be deeply undercut to make
it look detached from the background
(without actually detaching it!).
11 12
13 Turning to the other side of the
carving, the bunch of grapes must be
carved into an open cascade with plenty
of gaps between the grapes. The 18mm
stone gouge is used to create the size
and shape of each grape, with the 6mm
chisel opening out the gaps. Create the
curves of an under-layer of grapes in
the gaps between the upper grapes.

14 The big open flower at the top

centre faces upwards and has an outer
ring of petals laying outwards, with
an inner ring clustered inwards. Start
by ‘drilling’ a deep hole in the central
cluster by rotating and tapping the
6mm gouge. Carve the outer petals
to lay over the surrounding elements, 13 14
with deep grooves and score marks
to give a natural floral look.

15 Carve the central cluster of petals

to wrap around the centre hole. I
have copied the spiral pattern of
these petals from similar flowers
on Gibbons’ panels at St Paul’s.

16 The centrepiece of the carving is a big

floppy flower that is hollow and hangs
downwards. It is potentially fragile
and requires careful handling to avoid
breakages. Remember always to carve in
towards the most solid parts of the dome
shape, and avoid chiselling towards the
fragile outer edges. Start by carving the
flowing curves on the upper petals.
15 16

8 WOODCARVING 184
 GIBBONS-STYLE STONE CARVING PROJECT

17 Very carefully chisel out as much of

the hollow interior as you can without
risking a breakout at the top and
sides. Use a small 4mm ‘quirk’ chisel
or similar to minimise the shock, and
always carve towards the centre of the
hollow. When the hollow is excavated,
carve the details on the lower petals.

‘GIBBONISING’
THE DETAILS
18 Having gone as far as we can with
the standard tools, we now need to use
woodcarving tools (not our best ones)
to refine the details to the sharpness
that distinguishes a Gibbons-style
17 18 carving from an ordinary one. Work the
tools as you would for woodcarving,
pushing them along by hand pressure.
First, use a small, sharp woodcarving
chisel to undercut the petals on the
large flowers, and create sharp edges
with deep hollows under them.

19 Use a small, sharp gouge to smooth

the surfaces of the flowing grooves and
ridges on the flowers and oak leaves,
and sharpen their crinkly edges.

20 To give the grapes a smooth

surface with a regular shape, use the
inside of a gouge that is the right size
and profile (such as a 25mm No.6
gouge). Also use a small gouge to
19 20 smooth and round over the peas.

21 Where the tangents of the spherical

grapes meet each other, the small
triangular interstices need to be sharp
and clean. Use a tool with a point,
like this diamond-shape V-tool from
a cheap carving set, to chisel them
out. Do the same thing with the peas,
and also use this tool to sharpen
joins and edges all over the carving.

22 Use a broad, flat chisel to

smooth the larger surfaces of the
peaches, and to level and smooth the
background surfaces to a good finish.

FINISHING
21 22 23 Check that the background surface
is smooth and level all over, and make
sure all features are cleanly undercut
to make them look detached from
the background. Finally, carve 45°
chamfers of around 3-5mm width
around all edges of the block to remove
any chips and give a neat edge.

24 Hose off all the dust, and retouch

any imperfections revealed. With
a final wash down, the finished
carving is now ready for display,
outdoors or in, where it will
hopefully survive for 300 years like
Gibbons’ carvings at St Paul’s. w

23 24

WOODCARVING 184 9
Sperm
whale
puzzle
Cedric Boyns solves the task of creating this oceanic toy

have been lucky enough to visit Central America on my whale, a creature I have been lucky enough to encounter on several

I travels, and in Costa Rica in particular I was intrigued to

see the variety of wooden objects that local craftsmen
produce to sell on their stalls. These range from boxes with
hidden compartments to puzzles which clearly involve scrollsaw
occasions while cruising around the seas and oceans of the world.

Scrollsawing
Prepare the rectangular block so that what will be the bottom face
work, as well as vases, pots and several musical instruments, and one of the side faces (I used the left side but it doesn’t really matter)
including flutes and whistles. are planed flat and are at right angles to one another. This should be
One particular puzzle which caught my eye was like a 3D jigsaw, checked with the try square as these are the faces which will lie flat on
and, having fairly recently been given a scrollsaw that I hadn’t yet the scrollsaw table during the sawing process (see later). For all the cuts
used, I set about working out how these fascinating objects are to be made successfully, the block must basically remain square to the
constructed. I started with a lizard as this was one I had seen out scrollsaw table throughout the cutting process, so the final carving part
there, but wanted to try a design of my own. I decided on a sperm of the project can only be done after the sawing is complete.

10 WOODCARVING 184
 SPERM WHALE PUZZLE PROJECT

Things you will need

Materials: • Tracing paper No.5, 3mm, 6mm and 20mm
• Wood: block of lime: 50mm wide • Hot-melt and wood glues No.7, 6mm
x 45mm deep x 245mm long • Masking tape No.9, 6mm and 10mm
• Block of lime: 50mm wide x • Finish: sanding sealer No.11, 2mm
8mm deep x about 100mm and clear wax polish • Try square
long, from which to carve Tools: • Small clamp
the flippers (and eyes) • Suitable PPE, including • Detail carving knife
• Thin flattened strips of dust extraction • Hand drill
wood to be used to brace the • Scrollsaw and bandsaw • Twist drills: 2.5mm and 3mm
structure during carving • Table planer (or hand plane) • Abrasives: 100-400 grit
• Templates: top and • Selection of gouges I used: • Carving chops or suitable
side profile views No.3, 6mm, 10mm and 20mm vice for work holding

TOP PROFILE TEMPLATE

Extension needed Flipper fitted
if tail carved flat in place

5 CUT 3 CUT 1
CUT
50mm

SIDE PROFILE TEMPLATE

Random pattern
of wrinkles (in green) CUT 4 CUT 2
CUT 6
45mm

245mm
FLIPPER BLOCK
EYE
FLIPPER TEMPLATE
Shaded area removed Right eye with whittled
with a bandsaw prior peg (25mm long)
to shaping the two flippers Actual length
of the flippers, Left eye the same but
with shorter peg
is 25mm (8-10mm long)

→
WOODCARVING 184 11
1 Make full-size copies of the templates (I
used tracing paper for this) and use them
to draw the top and side profiles on the
block surfaces opposite the ones that have
been planed flat (as above). Included in
these profiles are the patterns for the saw
cuts that will be made with the scrollsaw.
(This photo shows the side profile.)
Note: My scrollsaw has a maximum

PHOTOGRAPHY BY CEDRIC BOYNS

depth of cut of 50mm, which was just
sufficient to complete this project.

2 Before the first cut is made it is possible

to slightly taper the section at the front of
the head, meaning less wood will need to be
cut as shown in the photo. With the bottom
surface of the block flat on the scrollsaw 1 2
table, the first cut can then be made. Once
the cut has been completed all the way
round, the elongated ‘nose’ section resulting
can be removed by sliding it up or down. If
this is to happen it is vital that the blade is
at right angles to the saw table, otherwise
the cut will be slightly off square and the
piece may only slide out one way – either up
or down but not both. This happened to me
but I feel it actually adds an extra dimension
to the solving of the puzzle if the piece can
only be put in one way. The choice is yours.

3 With the first piece removed, the block is

now turned 90° so the second cut can be made
following the pattern shown. Again, once
the cut is completed all the way around, the
second section of the puzzle can be slid out. 3 4

4 At this point, before the third cut is made,

it is possible to shape the head region of
the whale while retaining the required
square section further back. The two
pieces should be replaced for this and
temporarily held in place somehow (I used
tiny blobs of hot-melt glue which can be
easily removed afterwards). This shaping
reduces the amount of wood needing to
be cut through during the third cut.

Remember: to remove the first two

sections before you make the third cut.

5 Continue to make cuts 4, 5 and 6 in order,

following the same basic procedure outlined
above and remembering to remove the 5 6
last piece before the next cut is made.

6 & 7 Once the scrollsawing is complete the

pieces are reassembled so the tail section
can be cut to shape using the bandsaw as
shown. Details of both profiles will need to
be redrawn on to the block where necessary.

Carving
In order to shape the carving successfully,
I felt the inevitable movement of the pieces
that now make up the body of the whale
puzzle needed to be stabilised in some way.

8 I found a combination of a small strip

of waste wood attached with blobs of
hot-melt glue (easily removed later) and
a small clamp worked quite well at this
stage, but masking tape can also be used. 7 8

12 WOODCARVING 184
 SPERM WHALE PUZZLE PROJECT

9 Shaping the front of the head region

had to include carving in the single
blowhole, which on a sperm whale is
set on the left-hand side of the head
(accounting for the 45° angle of the blow,
which is a useful feature when trying to
identify this animal in the wild). This was
cut in with a No.5, 3mm gouge, before
some wood was pared away around it,
and the rest of the front of the head,
to leave it just proud of the surface.

10 The saw marks were removed from

the sides of the head with a small, shallow
gouge and the top shaped as required.
9 10 11 Turning to the tail end, this whale
species has a triangular or rounded
dorsal hump, followed by a spinal ridge
with knuckles along the top of the tail
region which narrows towards the flukes.
These features were cut in with a small
veiner, No.11, 2mm, and rounded over
with a suitable small, shallow gouge.

12 As is the case with all the large

whales, the overall width of the tail
flukes is greater than the maximum
width of the body region. This creates a
problem with this project as you cannot
have the tail end wider than the rest
of the body during the scroll sawing. I
feel there are two possible solutions:
A) Glue a small block of wood on
11 12 to each side of the fluke region to
extend it sideways, and then carve
the flukes so that they lie flat.
B) My chosen option: namely to turn the
ends of the flukes upwards so that they
do not protrude beyond the maximum
width of the body, but their length is
effectively increased so that they would
extend if they were flat. This seemed to
work. Having left an excess of wood in
the region of the tail flukes (see photo
7). I then used a No.5, 20mm gouge
to carefully cut across the grain and
remove wood in the central region.

13 A No.9, 10mm gouge was then

used, cutting with the grain, to
reduce the thickness of the flukes,
13 14 and I used the bandsaw to shape
the trailing edges of the flukes.

14, 15 & 16 Further shaping and

finishing was then carried out on
both the outside and inside of the
flukes until I was happy with the basic
shape. Do not make these flukes too
thin as this will reduce the chances of
damage as the puzzle is played with.

15 16

WOODCARVING 184 13
17 & 18 The flippers of a sperm
whale are disproportionately small
and have to be made separately and
glued on the sides of the carving. Using
the template with the drawings, the
flippers were drawn on to the end of
the flipper block and mostly cut out
on the bandsaw or scrollsaw. They
can be shaped and sanded while still
attached to the block, which can be
held in the chops while this occurs.
They can then be cut off the block
once shaping is complete. They need
to taper back from the leading edge,
which should be about 6mm thick to
the trailing edge about 1-1.5 mm thick.
17 18
19, 20 & 21 To add strength to the
join, a small dowel peg was whittled
from an offcut of lime, to fit into
a 3mm hole, 5mm deep, that was
drilled into each flipper as shown.

22 The position of the flippers is

shown on the templates and a
suitable 3mm hole must be drilled
(in section 4 of the body). I used some
masking tape on the drill bit to gauge
the depth needed (about 5mm).

23 They can then be checked for fit.

I planned them to emerge horizontally
but I feel they look best with the
leading edge slightly above the trailing
edge. Only once the final sanding 19 20
has been completed are the flippers
glued in place with wood glue.

24 The shaping of the underside

can now be completed. Once again,
I made use of a ‘splint’, glued on
as before and supplemented this
with masking tape as shown.

21 22

23 24

14 WOODCARVING 184
 SPERM WHALE PUZZLE PROJECT

25 The sperm whale is a toothed whale

with a relatively small mouth compared
with the other really large whales, which
rely on a huge gape to collect food. It is set
under the head and so, using a suitable
small shallow gouge, I shaped the lower
jaw on the underside of the first section,
and pared away wood to make it stand
proud of the underside of the head.

26 & 27 In order to keep the pieces locked

in place when the puzzle is complete, it is
necessary to secure the first piece to the
second piece so that the first piece will not
fall out of its own accord. This will keep the
whole structure together. It can be done
25 26 with the eyes. Each eye was whittled from
a small offcut of lime, leaving a bulbous
eye on the end of a peg. 3mm holes must
be drilled in each side of the head in the
second section where the eyes should be
(see drawings).
On the left side I made the hole and eye
peg short (about 8mm long) so that it did
not penetrate the first section. This eye
peg can be glued in permanently.
On the right side I made the eye peg, and
the drilled hole, long enough to pass into
and through the first section to hold it in
place. You want this to act as a jam-joint
when the eye peg is pushed fully home, so
making the very end of the hole a smaller
bore (2.5mm) and tapering the end of the
peg very slightly may be necessary.
27 28 The puzzle should now be securely held
together and can only be taken apart by
removing the right eye peg.

28 Final fitting of the flippers and sanding

can be completed.

29 Sperm whales have very wrinkled

skin and this can be conveyed by using a
suitable veiner to cut a random pattern
of small grooves over most of the body as
indicated in the drawings.

30 Once the finish is applied – I chose a

coat of sanding sealer followed by two
coats of clear wax polish buffed up with a
soft cloth – the completed puzzle should
look like this.
29 30
Note: There will inevitably be some saw
marks left on the inner surfaces of the
pieces. I chose not to try to remove these
as there is a danger of widening the gaps
between pieces too much, making the
whole structure too 'loose'. I sealed the
inner surfaces with a coat of sanding
sealer.

31 Taken apart, the pile of pieces provides

the challenge to solve the puzzle. No force
should be needed to put it together. Have
fun making this. I certainly did. w

31

WOODCARVING 184 15
Star of the show
John Samworth concentrates on the intriguing and ancient starfish as a centrepiece

PHOTOGRAPHY BY JOHN SAMWORTH

tarfish are echinoderms, not fish, with more than 1,500 But from here on the facts about starfish become extraordinary

S species known today covering the world’s oceans, from

the tropics to Arctic waters. They live in tidal waters
down to a depth of over 6,000m, and fossil records have
revealed starfish inhabiting the waters over 450 million years ago.
and they are a worthy subject for carving. In this piece
the starfish is clinging to the surface of the scallop shell.
Although our common starfish eat mussels and clams,
this one may have bitten off more than it can chew!

16 WOODCARVING 184
 STAR OF THE SHOW PROJECT

Things you will need

Tools: • No.3, 12mm, 6mm and 3mm gouge
• PPE and RPE • No.8, 6mm gouge
• Wood marking gauge • No.2, 10mm skew gouge
• Set square • Parting or V tool
• Jack plane
• Fret or coping saw Materials:
• No.11, 12mm and 6mm gouge • Two pieces of lime, 12.5 x 12.5cm x 25mm thick
• Veiner No.11, 3mm gouge • Walnut 25 x 25mm x 100cm long for the frame

→
WOODCARVING 184 17
1 This carving will be framed. Start by
ensuring that the edges are straight,
clean and square. The carving is in deep
relief build-up from two pieces of
25mm lime. Using a plane or by sanding,
clean and flatten one face on each
piece ready for gluing together.

2 Trace the shell and starfish design on to

one piece of lime and cut out the shape
about 1mm over size. Glue and clamp the
two pieces together, leaving overnight to
set. Using a depth gauge, mark a line about
12mm from the bottom of the carving on
all four edges. This marks the level of the
background of the carving and where the
frame will sit. The second, smaller pencil 1 2
line marks the high point of the shell. The
starfish will sit on top of the shell and be
carved in the top third of the lime.

TOP TIP: Setting the shell design

central and at a slight tilt within
the frame is more appealing to the
eye than setting it horizontal.

3 Using a No.11, 12mm gouge, rough out

the waste wood between the starfish’s
legs to the depth marked in the picture.
By carving away from the drawn line,
the process is quick. If cut as indicated in
the picture there is no need to first cut
around the starfish with a parting tool. 2 3

4 The edges of the starfish remain strong

and can be carved to a clean, crisp line.
Using a No.11, 6mm gouge, remove most
of the buttress wood supporting the
starfish legs by cutting in from the side.

The shell
5 Sketch in the shell’s edge around its hinge,
but do not include the scalloped outline,
keep is as a simple curve. Using a No.11,
12mm gouge, remove this wood all the
way down to the second piece of wood.

6 Using the No.11, 12mm gouge, remove

the waste wood from around the shell
down to about 1mm above the final
background’s depth. Note that the shell’s 4 5
hinge will now be too high. The corner
marked X will be the lowest point of the
carving. Lower the two sides of the hinge
to within 1mm of the background.

7 Using a No.3, 12mm gouge, round over

the shell shape to the background. Do not
at this stage cut in any scalloping to the
edge, these will be formed later. Mark the
centrelines of the starfish legs. This shows
where a series of raised nodules will be.

6 7

18 WOODCARVING 184
 STAR OF THE SHOW PROJECT

8 Using a No.11, 6mm, cut the legs on

either side of their centreline, leaving a
4mm ridge down the centre. Lower the
top of the legs to about 10mm from the
surface of the shell. Leave the centre of
the starfish at its original height.

9 Sketch in the outline of the legs. Using a

No.3, 12mm gouge, cut back the legs to this
line. Adjust the ridge to about 4mm wide
and high along the legs. Along the ridge,
mark out where the nodules will be formed.
Five or six per leg will look very effective.

10 The profile of the shell should be a

gentle curve, symmetrical left and right and
8 9 with the front-back high point off centre
towards the back when the shell hinges.
In the image it is apparent that the hinge
is too high. Using a shallow No.3, 12mm
gouge, adjust the profile as necessary.

11 Sketch in guidelines for the shell’s ridge-

groove pattern. The lines mark the centre
of the grooves. Each ridge-groove radiates
out from the centre and back of the shell;
symmetrically left and right. Five grooves
either side will be sufficient. With a veiner
No.11, 3mm gouge, chase out the centre of each
groove from its start to the background level.
Each groove should appear to flow organically
underneath the starfish, but do not undercut
the starfish. Access at times is restricted, but
it will improve as the carving progresses.
10 11
12 Swap the gouge for a No.11, 6mm fluter and
re-cut the groove for two-thirds of the length
to the background. Next, swap to the No.11,
12mm fluter and re-cut the final one-third
only to the background. The effect here will
progressively widen the groove from narrow
in the centre to full width and the end at the
background. It is this process which will form
the familiar scalloped outline to the shell.

Follow the grain

13 Invert a No.3, 6mm gouge and round
over the groove. Take care to follow the
grain, which will swap direction, as marked,
from one side of the groove to the other.

14 Using a parting or V-tool, separate each

12 13 nodule along the spine of each leg. Ideally,
the nodule spacing will match the width of
your smallest gouges, either a 3mm veiner or
a No.3, 3mm gouge. These small gouges and
a skew will tidy the spaces between nodules.

15 Using an inverted No.8, 6mm gouge, run

across the tops of each nodule, following
the grain. Work in both directions, lifting
the gouge handle up as the cut progresses,
rounding the nodule into a pea shape. Use
the No.3, 3mm gouge and a skew to remove
any waste from between the nodules.

14 15 →
WOODCARVING 184 19
16 Invert the No.3, 12mm gouge to
round over the legs. Where the legs
meet, vary the appearance by using
crisp cuts imitating one leg folding
over another (see middle bottom), and
smooth, sweeping curves where legs
are stretching out (see left hand side).

17 The main carving is now complete;

time to begin tidying the work.
Originally, I marked the background
depth at stage 2, using a marking
gauge. This left a fine scratch line in
the wood as a marker. Use this scratch
to align a large, flat gouge to complete
the background, lowering into the
final depth, consistently all around the 16 17
edges, ready to fit into your frame.

Tidying the work

18 Tidy and clean the carving. There
are many ways to achieve this and
which to choose is a matter of personal
preference. Where possible I prefer to
leave as much of the original tool finish
as possible. The quickest technique!
From the top of the picture, I could
use abrasive paper, working through
the grits. The result is to soften finish,
losing all tooled appearance and risk
of losing any crisp edges. Second
is a diamond needle file. Next is a
traditional needle file. Next is a double-
ended riffler wood rasp. After using
a riffler, the finish normally requires 18 19
further work with file or abrasives. Next
is a carving gouge used perpendicular
to the carving as a scraper. Last is a
homemade scraper. The files and
riffler come in an array of shapes and
sizes to fit the carving. Whichever
technique you choose, the aim is to
leave the carving clean and tidy.

19 If, like me, you do not have a set

of accurate mitre joint clamps, use
the carving as a template to hold the
frame in place while the glue sets. I
used Super Glue on the mitre joints,
but any proprietary wood glue will
suffice. I made the frame from a
length of black walnut; square is cross
section with a small internal rebate.
The frame was too tight, so I cut
away a few areas to fit snug around
the carving. I like the appearance
of nature outgrowing the frame.

20 The frame is made from black

walnut, which contrasts well with the
lime wood. The frame is glued on to the
carving before the finish is applied. I
used tung oil, left to cure for three days
before applying a top coat of beeswax.
Hang on a wall and enjoy. w

20

20 WOODCARVING 184
 Study with us and gain advanced
woodcarving & gilding skills
)FMQ
GVOE
ZPVS
DPVSTF
XJUI
PVS
HSBOUT
TDIFNF

· The UK’s only BA (Hons) & PGDip/MA in Carving & Gilding

· Wide range of grants and financial support
· Traditional craft skills of carving, letter cutting, gilding and design
· Art skills of drawing and modelling to support carving practice
· Tutors all practising carving professionals
· Preparation for professional practice
· Active alumni and tutor professional network.

Book an online open day to study from Sept 2022

One, two or three-year courses available, full time or part time study.

Visit www.cityandguildsartschool.ac.uk/woodcarving-and-gilding
to find out more and watch a short film about the course.

admissions@cityandguildsartschool.ac.uk @CGLArtSchool #CGLArtSchool

 Soar like
an eagle!
Chainsaw carver Paul Waclo
tells WC about his life and work
COURTESY OF PAUL WACLO

www.chainsawcarvingbypaul.com
@paulschainsawcreations

22 WOODCARVING 184
 CHAINSAW CARVER PAUL WACLO IN PROFILE FEATURE

fter a career in design and

A production, Paul Waclo took

up chainsaw carving in 2012.
Just two years later, he gave up his
job to carve full time. His creations
include eagles, horses, bears, owls,
human figures, benches and treehouses.
He receives numerous commissions,
including one for the US President!
He lives in York, Pennsylvania.
He shares his story with us here.

Inspired to carve
My creative adventure began as a graphic
designer working with a Top-Secret
clearance drawing various layouts for
government defence programmes.
A degree in Mechanical and Architectural
drafting showed me that I was able to
perceive and illustrate images in three
dimensions but, at that point, I had no
idea how to utilise that particular skill…
Most of my adult life was spent in
sales creating custom apparel for the
automotive and motorcycle industry.
BMW of North America was one of my
biggest clients and I designed many
of the garments you would see in their Delivering a 9-foot American Bald Eagle carving to the White House
boutique dealerships. I would sketch
graphic concepts and hand them
off to my team of artists to finalise
before approval and production. ‘I didn’t know how to start [the chainsaw]. I didn’t
After spending many years travelling
around the United States in aeroplanes know how to put the oil in it. I had never picked one
and rental cars, one day I returned
home to my wife and three children up before, but that didn’t slow me down in the least.’
to find them watching a Discovery
Channel programme called Saw Dogs
where extremely talented carvers were
creating amazing wood sculptures.
I was immediately struck with
enthusiasm to run out and purchase a
chainsaw. I didn’t know how to start it.
I didn’t know how to put the oil in it.
I had never picked one up before, but
that didn’t slow me down in the least.
Within a week, I had sorted out the basic
operation and fumbled my way through
the first little bear in my driveway.
Soon, I had curious visitors walking by
asking if I was going to sell my creations.
The answer was, of course, ‘Yes, will
that be cash or charge?’ My years of
sales and marketing experience helped
me design a logo and website for my
new side business. Within a year, I was
taking orders at a local farmers market
where I would set up on the weekends to
entertain the customers. The requests for
bigger and more complicated sculptures
was increasing to the point where I was
able to make the decision to walk away
from my successful corporate ‘job’ and
create an entirely new and exciting
lifestyle for myself. It was certainly a
big gamble but it didn’t take long before
I was surpassing the financial gains I
once enjoyed while working to build
someone else’s business. Now,
I was working for myself and my mind
was completely dedicated to designing
and growing my own new venture. In the process of carving a 12-foot American Bald Eagle →
WOODCARVING 184 23
 Paul working on a horse carving

A test run for a 14-foot Native American carving Paul also makes carved benches

Building a business through to the success I enjoy today. me in any way they could. One of the most
Social media and a good website had a great Years passed by and now in 2021, it’s important friends I made was Larry Dubel,
deal to do with how I initially attracted the been seven years since I went pro and who owns the sawmill where I carve most
bulk of my customers and I was finding I understand that the passion you must of my large pieces. He made his many wood
myself standing in front of massive trees feel for whatever you do in life is what suppliers and heavy equipment available
while still possessing somewhat limited drives you through the tough times where to me and that has made it possible for
skills. I persevered with a strong belief that many people would give up. Whether it me to accept much larger projects that
I was doing this and there was nothing was 15°F below zero out or 110°F, raining require his heavy loaders to move and
I’d allow to slow my enthusiasm. There or snowing, I was out there completely manipulate into place. I’ve learned so much
were lots of technical frustrations and focused on the task at hand. Looking back, about the many different species of trees
many lessons learned by watching hours of I certainly encountered many issues that and which ones are best for carving. Most
YouTube videos. I also need to throw much could have derailed the entire operation of my sculptures are carved from white
credit to my wife and family putting up but, somehow, I was making good business pine but my favourite wood is paulownia,
with the long weekends carving at different decisions and trying to be as careful as which has a really unique grain that I
venues and the many pounds of sawdust my possible climbing wet scaffold and swinging showcase in the wings of my large eagles.
wife must have put through the laundry. We dangerous tools to make my living. Creating so many sculptures, it’s difficult
can look back on it now and acknowledge Throughout the journey I met many to single out my favourite but, one of my
it was a group effort to help me push wonderful people who were willing to help biggest sculptures was the 20-foot Kodiak

24 WOODCARVING 184
 CHAINSAW CARVER PAUL WACLO IN PROFILE FEATURE

One of Paul’s carved owls Kris Connors and Paul with their giant Kodiak bear carving

bear that I carved with my friend Kris would be more important than that?! who appreciate that higher quality.
Connors, who I would consider one of Good times…
my earliest mentors. Kris has many years Future plans
of experience in sculpture and we have a Eagle carvings My latest venture is ‘Cold Cast Bronze’
great relationship that allowed us to work My eagles are now what I’m known for and which involves creating an original
in very close proximity to each other while I’m always striving to improve the look sculpture and then a mould that can be used
we carved away on this massive bear. and f low of these majestic birds in the air. to produce additional copies in the future.
Since it’s not easy to find trees big enough The first in this series is a soaring eagle with
Carving for the President for the large sculptures my customers a 5-foot wingspan that will be mounted on
Being asked to carve a 12-foot American request, I attach the head and the tail in top of a 7-foot iron pedestal in the shape of a
Bald Eagle for President Donald Trump’s a seamless fashion that most observers beautiful sweeping arch. I intend to keep the
74th birthday was a tremendous honour won’t even notice. Joinery is all part of first edition, but there are already customers
and I hope to visit him again at Mar-a-Lago the engineering that takes place while interested in this concept for future orders.
in Florida where the sculpture is now. I’ll constructing larger and more intricate I’ll always be aware that the many
always remember the Secret Service agent pieces. Kiln-dried wood is used for many challenges over the years have brought
calling my cellphone to ask me if I could of my open wing eagles which ensures a me to where I am today and allow
be at the White House in the morning. much longer lifespan for the sculpture and me to fully acknowledge life is short
What else could I possibly be doing that I do have a good percentage of customers so, Carpe Diem my friends!

WOODCARVING 184 25
effortless
shaping
with kutzall tools
incredibly smooth control | superior material removal
stays sharp longer | hassle-free maintenance

Shop our complete line of Rotary Burrs,

Shaping Wheels, & Hand Rasps at Kutzall.com.
SUBSCRIBE TO

Subscriptions start
from just £12.15

Free early delivery

direct to your door

+44 (0) 1273 488005

gmcsubscriptions.com/woodcarving

© Shutter Stock

Editorial: Karen Scott Printer Precision Colour Printing Current subscribers will automatically receive a
E: karensc@thegmcgroup.com Distribution Seymour Distribution Ltd renewal notice (excludes direct debit subscribers).
Designer: Oliver Prentice T: 020 7429 4000 Cheques made payable to GMC Publications Ltd
Illustrator: Oliver Prentice Woodcarving (ISSN 0965-9463) is published bi-monthly Post your order to: The Subscription Department,
Advertising: Guy Bullock by Guild of Master Craftsman Publications Ltd. GMC Publications Ltd, 166 High Street,
E: gmcadvertising@thegmcgroup.com Subscribe from £12.15 (including free P&P) Lewes, East Sussex BN7 1XU
Publisher: Jonathan Grogan Save 10% with 3 issues Tel +44 (0)1273 488 005
Production Manager: Jim Bulley Save 15% with 6 issues Fax +44 (0)1273 402 866
Subscriptions: pubs@thegmcgroup.com Save 20% with 12 issues Email: pubs@thegmcgroup.com
T: 01273 488005 Plus UK subscribers can save an extra Website: gmcsubscriptions.com
Marketing: Anne Guillot, Sophie Medland 10% by choosing Direct Debit
Christmas sport
Peter Benson takes to the slopes with this mischievous skiing figure

L ast year for the Christmas project we carved a Swedish

Christmas spirit, or ‘tomte’. As I have been somewhat
incapacitated for most of 2021 and unable to attempt
any serious carving, I have decided to follow on with the
same subject and add a few variations that you might like
Things you will need
Tools:
• Bandsaw or coping saw to cut out the shape of the figure
• Knife
• Safety glove, PPE and RPE
to try. I have always been a very keen skier and thought • Strop
I would see how the tomtes would take to the sport. • No.3, 6mm or 7mm small gouge
The project involves carving a basic crouching tomte, • No.39, 3mm or 4mm small V-tool
which can be mounted on a spring to give some movement
to the figure. The skis are carved into the base, which is Materials:
shaped to represent the snow slope. You can, of course, • Piece of timber (I used jelutong) 90mm long,
carve the skis separately and glue them on if you wish. 60mm deep and 42mm thick for the figure.
• Piece 80mm long, 50mm wide and 35mm
thick, cut as shown, for the base.
• Length of 8mm compression spring, if you
want the figure to rock – readily available from
online sources such as eBay or Amazon.

28 WOODCARVING 184
 CHRISTMAS SPORT PROJECT

87mm

1 Using the pattern, cut out

the outline of the figure.

2 It is not essential that you use a

spring, but I do think it adds a bit of
life to the carving. You will need a
compression spring 8mm in diameter
1 2 and around 30mm long. You will need
to carve or drill a recess about 15mm
deep in the underside of the figure and
then drill an 8mm diameter hole at
the base of this recess This is to make
the pivot point as high up the figure
as possible, otherwise it will not rock.
You can do this after you have cut out
the pattern, but you may find it safer
to drill the block you have marked
out before cutting the shape.
PHOTOGRAPHY BY PETER BENSON

3 The base can be any size, depending

on what you intend to do with it – see
the end of the article. The shape needs
to be triangular (like a slice of cake).

4 Once you have cut the basic shape,

draw the outline of the hat, nose
3 4 and space between the feet. →
WOODCARVING 184 29
5 Remove the waste to leave the
squared shape of the figure.

6 Starting with the hat, round off all the

corners, making sure that the body and base
of the hat are smooth curves, not squares
with rounded corners. Don’t worry too much
about getting the base of the hat neat at
this stage as you may well make marks in it
as you texture the beard. Take care that you
shape the body so the top looks as though
it fits into the hat rather than have the hat
sitting on top. You can add some shape to
the feet but don’t bother with detail.

7 Using your V-tool, texture the beard with

short, curving cuts. Avoid straight lines and 5 6
don’t be too careful with where the cuts are
placed. The beard needs to look random
but flowing towards the rear of the figure.

8 Now you can trim around the bottom

of the hat, undercutting slightly with the
tip of your knife to give the impression of
the hat fitting over the top of the head.

9 The figure should now be ready

for painting with acrylic watercolour
paints. When finished, give a coat of
satin varnish to protect the finish.

10 For a simple, free-standing figure

you can now work on the base.
Drill an 8mm hole about 6-8mm deep
down the centreline and approximately 7 8
halfway down the slope. Once you have
carved, or attached the skis, you can
fit the spring. The spring should fit so
that it is at right angles to the skis.

11 Once finished, fit the figure to the base

using the spring. You will need to adjust the
length of the spring so that the figure rocks
freely. The spring can be glued with epoxy glue
and I have put two cocktail sticks between the
figure and the skis until the glue sets. This will
ensure that there is space for the figure to rock.

POSSIBLE USE 9 10
Someone mentioned to me that this might
make a good door-stop wedge, so I have
added a picture of my attempt to produce
this. It does, of course, have to be fitted to
the particular door it is for, but you may
have ideas of your own. Whatever you
finish up with, make sure you have fun. w

11

30 WOODCARVING 184
 For
all
your For your passion

pfeil
Woodcarving tools
Carving made in Switzerland

Requirements More than 600 high quality products

www.pfeiltools.com

Quality
Top
Tools.

and
Lime
Oak

Carving
Blanks.

postage
FREE
for
most
deliveries
in

the

UK

on

orders
over
£45

P +41 (0)62 922 45 65 E-Mail info@pfeiltools.com www.pfeiltools.com

F. Zulauf Messerschmiede und Werkzeugfabrikations AG
pfeil

The Ultimate
Huge stocks of 1st Hand Carving Tools.

Dennliweg 29 CH-4900 Langenthal

grade Lime Blanks (Full range of Pfeil in Stock)

NEW

Flexcut 5 Piece
Printmaking Set

www.toolsandtimber.co.uk
you can order online now

Nova Stockist

pfeil

WE ARE EASY TO FIND:

11/2 miles from the M6, J40.
Take the A66 towards Keswick, Open 8am to 5pm daily.
turn left at first roundabout, 10am to 5pm Saturday.
follow the Brown Signs to Closed Sunday.
The Alpaca Centre.
G&S SPECIALIST TIMBER
The Alpaca Centre, Snuff Mill Lane, Stainton, Penrith, Cumbria CA11 0ES.
Tel: 01768 891445. Fax: 01768 891443. email: info@toolsandtimber.co.uk
Holly candleholder
Dave Western gets into the Christmas spirit with this seasonal table decoration

espite it being a year-round presence in my garden, for

D me, nothing symbolises Christmas and wintertime quite

like holly. Perhaps it’s the contrast of the green leaves
and red berries or maybe it's just because it’s become such a
ubiquitous part of nearly every festive scene, but it’s always the
holly I will remember from any image or arrangement. This elegant
PHOTOGRAPHY BY DAVE WESTERN

candleholder takes advantage of the graceful sweep of the holly

leaves to form a sweet little tripod that supports a deeper central
area where the candle resides. The even spacing of the leaves is
contrasted nicely by some randomly placed berries, which help
give the piece a more organic and less mathematical feel. I used
¾in-thick timber for this piece, but would suggest using something
a bit thicker if you can access it. The deeper the candle hole can be,
the better for stability and an insert is highly recommended.

32 WOODCARVING 184
 HOLLY CANDLEHOLDER PROJECT

Things you will need

Tools: • No.1 sweep 10mm gouge • Flat needle file
• Saw: jeweller’s saw, • No.5 or #7 sweep 14mm gouge • 320 grit sandpaper
scrollsaw or bandsaw • No.9 sweep 7mm and • Penetrating oil
• Glue stick and paper pattern 10mm gouges • Beeswax polish
• ¾in or similar Forstner bit • Bent or hook knife
• Drill or drill press • 1in straight knife

SAFETY GUIDELINES FOR CANDLES AND TEALIGHTS

• Use an appropriate heat shield made from either metal, ceramic or glass.
• If you stick the glass, metal or ceramic heat shield insert in place, use a heatproof adhesive and make sure you leave
a little bit of an expansion gap between the hole and the holder insert to allow for any wood movement.
• Never leave a lit tealight or candle unattended or place one near any flammable material.
• Never place tealights or candles too close together.
• Always make sure the holder of the candle or the tealight is of a design and weight and has a suitable width
of base to be stable enough to stay where it is placed and withstand accidental knocking.

1 I selected a nice pale piece of lime

(bass/linden) wood for its pale holly
wood look and for its ease of carving.
I made sure when I glued the pattern
to the workpiece to orient the grain
lengthways through at least two of
the leaves. This meant there was only
one leaf I needed to battle with cross-
grain orientation. Unless you are
unbelievably lucky with your grain,
you’ll have at least one leaf that has
the wood grain running across rather
than from tip to stem. Ensure the
cross-grain section is good, straight,
easily-carved wood without
swirling grain or knots etc.
1 →
WOODCARVING 184 33
2 With the paper pattern glued in place,
begin work by drilling a hole suitable for
the most common candle sizes you might
encounter. If you wind up with a hole a bit
small, the candles can be shaved, and if it’s
a bit large, they can be shimmed, but what
is ideal is for the hole to be either bang on
or ever so slightly smaller than the candle’s
diameter. I used a ¾in Forstner bit in a
drill press as it let me drill to within 1/8in
of the bottom without breaking through.

3 & 4 I achieved a fairly decent fit and

didn’t need to shim, but it maybe isn’t as
tight as I would like so I probably would
drill with an 11/16in bit the next time and
shape the candle a bit for a super-snug fit. 2
It’s really important that the candle is not
at all loose and floppy in the hole or you
risk the whole arrangement toppling over
and setting fire to your Christmas dinner.
Take whatever time is necessary to ensure
you’ll get a proper seating of the candle and
that it stands straight up with no leaning.

Shaping the leaves

5 & 6 When you are certain the hole is perfect
for the candles you intend to use, you can
begin the process of shaping the leaves and
cutting away waste material. For this, I used
a scrollsaw for the neatest effect, but if you
lack one of those you can make use of a drill
press to shape along the edges of the leaves
and then clear the remaining stock with a
straight knife. You could also make use of 3 4
a jeweller’s-type coping saw and cut the
pattern out, or go really old school and use
a variety of gouges to cut the pattern to the
line. Fortunately, the pattern is not large,
so even hand shaping with a straight knife
is not beyond the realms of possibility.

7 With the outline of the design neatly cut,

you can begin shaping a curve into the top
face of the leaves. I drew lines freehand,
making sure to leave about 3/8in of material
for a base at the tips of the leaves. This area
is necessary to maintain the flatness and
support needed to keep the holder from
wobbling, so avoid the urge to take the
leaves down too close to the ground.

8 I used a bandsaw to quickly cut a 5 6

substantial amount of material away in
a quick pass, but those without a power
saw can make use of a shallow gouge like a
No.5 or 7 sweep to clear this stock quickly
and efficiently. Be careful to leave the area
around the berries untouched at this point.
You will want the berries to stand proud
of the leaves, so ensure you don’t cut them
down at all at this stage. Again, avoid the
urge to cut the leaf tips too thin, as you
will need some material there for bases.

7 8

34 WOODCARVING 184
 HOLLY CANDLEHOLDER PROJECT

The berries
9 With the rough stock removal largely
completed, use a No.9 sweep, 10mm gouge to
shape the round berry bodies. Carefully work
your way around each berry, being careful not
to pop any material up and out. The objective
at this stage is to clearly define each berry
and to create a stop line where more leaf
material is removed to raise the berries.

10 With the berries defined by the gouge

cuts, use a No.1, 10mm or similar flat gouge
or chisel to start carefully removing more
leaf stock. I worked around each berry taking
about 1/8in of material with each pass. I would
then use the gouge to refresh the cuts around
9 10 each berry before taking another 1/8in deep
cut of leaf material away. I repeated this
process several times until I had raised the
berries to about ¼-3/8in above the leaves.

11 Once the berries are defined, begin

shaping them, using both a No.1 flat gouge
and a 1in straight knife. I began by cutting
little faceted chamfers around the edge and
gradually removing more and more stock
until each berry was nicely rounded over.
Ensure the knife is razor sharp or you risk
pulling on the end grain. Initially, my plan
was to drill a 1/16in hole and fill with black
wax to create the terminal black dot at the
end of the berry, but I decided it would be
too distracting. In the end, I left the berries
unadorned, but you may well disagree with
11 12 me and opt for some decoration in this area.

12 When shaping the faces of the holly leaves,

I opted to keep a fair bit of tool marking visible
and rather than engraving distinct veins, just
let a prominent midrib define the flow of the
leaf. I also endeavoured to curl the edges of
each leaf upwards a bit as real holly leaves
tend to do. For the shaping and curving I used
No.9 sweep gouges (a 7mm and a 10mm).

13 This detail shot shows how I hollowed

the leaf between the midrib and the edges
to achieve some depth and a bit of ‘action’.
With the edges curved upwards a bit, I
further shaped each little point a bit more
to make them each slightly different in
terms of how much curve they have.
13 14
14 The cross-grain leaf presented some
additional problems with the short grain,
which can pull up a bit and chip out if you are
not cautious. Use a really sharp gouge to cut
across the grain. I found it best to clear the
centre point of each hollow down to its lowest
depth and then fair down from either side.

15 & 16 Once the leaves are shaped to your

satisfaction, you can tidy up the berries. I used
a small file and some very fine sandpaper to
get rid of the last of my knife facets and to
ensure the berry appeared uniformly smooth.
If you are deft with a file, you will likely not
need sandpaper, but I found some 320 grit
came in handy to really tidy up the berries.
You might also want to slightly undercut the
berries with the tip of a straight knife to give
15 16 them a bit more roundness and depth. →
WOODCARVING 184 35
Undercutting for effect
16 Undercutting the carving brings more
vibrancy to the leaves and makes them
appear much lighter and more delicate. I
used my bent knife to rough this area away,
leaving the leaves about 3/8in thick through
the centre and tapering down to about 3/16in
along the edges. If you don’t have a bent/
hook knife, you can undertake this operation
with a stout straight knife and a gouge
or two. Leave sufficient space around the
central section for the candleholder and
also leave an unfinished area of about 3/8in
to ½in at the tip of each leaf. Keeping these
four areas flat and uncarved will allow the
carving to sit flatly and securely on the table.
16 17
17 After all the roughing out was completed
on the back faces of the leaves, I raised the
midrib of the leaf and then put a bit of effort
into making sure the rest was neatly carved
without bumps or raised areas with an even
texture of cuts from the blade. Again, I
wanted the faceting of the knife cuts to bring
the area some vitality, even though it will
seldom be viewed. As with the front face,
the cross-grain leaf posed a few problems,
but shallow cutting with a sharp blade
ensured I avoided chipping out any areas.

18 I confess that I wasn’t super brave about

undercutting the edges of the leaves and
so left about 1/16-1/8in of material at the
edges. I was worried the fine points might
become too weak and chip off if I undercut 18
them to an extreme. If you are braver than
me, with a steadier hand and keener eye,
you might be able to really undercut that
edge and create look of an actual thin
leaf. I used a fine straight knife to gently
cut this edge section, but a broad chisel
or flat gouge might work just as well.

19 The final bit of detailing on the leaves

involved cutting a little incision along
under the leaf and parallel to the bottom
of the holder to ‘thin’ the leaf’s appearance
where the wood thickens out again to form
the tripod platform the holder stands on.
This was a bit trickier than it looks because
you are cutting through a lot of end grain
and the knife has a tendency to wander
off line. Take your time and aim to create 19 20
groove about 1/16in deep and wide.

20 Finally, give the circular central section

one last going over to ensure it is nicely
rounded with cleanly cut sides and a
gently chamfer along the edge which
will contact the table or mantelpiece.
Be cautious not to cut too much side stock
away as you will risk breaking through into
the hole which will contain the candle.

21 I brushed on a couple of coats of

penetrating oil to bring up some colour
tone and to hopefully protect the piece
against spilled wax staining it. A generous
coat of beeswax polish applied a few days
after the final oil coat has cured (about
three or four coats with a good four days to
cure) ensures the best possible finish. w 21

36 WOODCARVING 184
 rve s
a chip ca e sig n
Baldin d
Tatiana te snow flake
ic a
an intr

r
ing timbe mte
• Select to
an adze holder • Skiing
pening le t
Gu id e to shar le • Holly cand ab bowl • Trive
VICE zz g • Cr
IC AL AD Whale pu e carvin
TECHN TS TO CARVE ons-style ston
PROJEC • Mouse • Gibb
h
• Starfis

READ ANYWHERE FROM

ONLY £3.33
PER ISSUE

© Shutterstock
 © RAY LOUGHLIN FOR THE BDWCA
2013, Red-legged Partridge by James Langford

38 WOODCARVING 184
 NEWS COMMUNITY

BDWCA NEWS & EVENTS

© RAY LOUGHLIN FOR THE BDWCA

© HARRY HARTSHORNE FOR THE BDWCA

2010, Avocet by Kathleen Winn

A s I write this, we are three weeks away from our Annual Show
and Competition – the Festival of Bird Art – which is always held
on the second full weekend in September – this year the 11th
and 12th September 2021, at its normal venue, the Agricultural Centre
in Bakewell, Derbyshire, and my 17 year old granddaughter is working
hard to complete her entry in time!
That set me thinking and remembering the youth carvers who have
competed since I got involved in writing this article for our Association.
In 2009 Kathleen Winn won Gold, and Best Youth, for her carving of a
Great Spotted Woodpecker, and in 2010 she repeated her success with
an Avocet, in both years she was the only youth carver competing.
Kathleen moved up to Novice in 2011, where she was awarded
Bronze for her Marble Teal, but we had three youth competitors! Two 2009, Great Spotted Woodpecker by Kathleen Winn
youngsters, both from our Kent group, were awarded Silver and Bronze
for their carvings of Dunlins, and James Langford, with three entries, Eared Own sitting on a book, a carving he did as part of his GCSE
won two Bronze awards and Gold, and Best Youth, for his Wren. course in Art and Graphics. There was nothing the following year,
2012 and James was back again, with four carvings, three of which and then in 2016 my granddaughter started competing at the age
took Gold and one Bronze, and his Common Quail also won him the of 12, improving each year until in 2019 she won Gold, and Best Youth,
Best Youth trophy. There were three other youth competitors, with a but she was the only youth competitor each year!
total of seven carvings, the most we have ever had on the Youth table! As carvers we all know that we need to bring young people into the
In 2013 James moved up to Novice, entering a Red-legged Partridge, craft if it is going to survive, so what inspired these young people to
and not only did he get a Gold but also won the trophy for Best Novice pursue the art form? The answer is that they all had mentors, people to
Carving! There was one young youth carver that year, from our Thames encourage them and help them develop their skills! Do you know any
Valley group, who won Bronze for his Dunlin. young people who have shown an interest in carving and could you
In 2014 Joe Chappell took Gold and Best Youth with his half size Long help them?
© RAY LOUGHLIN FOR THE BDWCA

© RAY LOUGHLIN FOR THE BDWCA

© RAY LOUGHLIN FOR THE BDWCA

2011, Wren by James Langford 2012, Common Quail by James Langford 2014, Long Eared Owl on book by Joe Chappell

WOODCARVING 184 39
© PAM WILSON FOR THE BDWCA

The competition tables before the show opened on the Sunday

How did it go?

© FRANCES MILBURN FOR THE BDWCA

…And now it is two weeks after the Show, and the good news is
that we had three youth carvers compete, my granddaughter,
Leah, and the two granddaughters of another carver who had
seen him working on one of his entries and asked if they could
enter something. Leah won Gold and the Best Youth trophy
with her interpretive carving of a flying Red Kite and will be
competing at Novice level next year, and the girls were
both awarded Silver, hopefully they will be competing
again next year. What did the three of them have in
common? I’m sure you’ve guessed, they had mentors!
With the uncertainty over Covid still affecting some people’s
attitude to going to events visitor numbers were down, and only
thirty carvers competed, but fortunately some of those carvers had
definitely been busy during the two years since the last show and
there was a great selection of carvings on display. Congratulations
and thanks for helping us have a great show go to all of them, and
a special welcome to the three new members who competed!
David Askew won the top awards of British Bird Carving Champion
and the BDWCA Championships with his beautifully carved and
painted carving of a Curlew, and the Runner-up to the British
Champion was awarded to Paul Tully for his interpretive
carving of Two Crested Grebes. Paul, who has been working
his way up the classes, winning Best Novice in 2018 and Best
Intermediate in 2019, won Best Intermediate again, together
with the Artistry Award, and will be competing at Advanced level
next year, we will be very interested to see what he enters!
I will write more about the show, and the winning carvings, in
the next issue, but special mention must go to one of our new
members – Stephen Rose. Stephen won Gold, Best Novice and
Best Newcomer for his Eurasian Hobby standing over a House
Martin, together with a Silver and two Bronzes for his other
entries and will be competing at Intermediate level next year.
Pictures of all the carvings entered in this year’s Show are
on the Bakewell Show page of our website – www.bdwca.
org.uk – as well as pictures from the previous few years. British Champion 2021, Curlew by David Askew

40 WOODCARVING 184
 NEWS COMMUNITY

Contacts
For further information on the BDWCA,
as well as membership details, visit
www.bdwca.org.uk. Membership
includes three issues of our full-
colour magazine, Wingspan.
Or contact the Membership Secretary:
Mrs Janet Nash, 26 Shendish Edge,
Hemel Hempstead, HP3 9SZ,
Tel: 01442 247610
Alternatively, please email:
pam.wilson@bdwca.org.uk

© FRANCES MILBURN FOR THE BDWCA

© FRANCES MILBURN FOR THE BDWCA

Baby Penguin (approx. one third size) by Chloe Smyth Emperor Penguin (approx. one sixth size) by Hannah Smyth
© FRANCES MILBURN FOR THE BDWCA

© FRANCES MILBURN FOR THE BDWCA

Best Intermediate, Two Great Crested Grebes (75% lifesize) by Paul Tully
© FRANCES MILBURN FOR THE BDWCA

Best Youth, Flying Red Kite (approx 20% lifesize) by Leah Hastie Best Novice, Eurasian Hobby standing over House Martin by Stephen Rose

WOODCARVING 184 41
From the community
A collection of letters and news from the woodcarving community

Tortoise & jockey

BeaverCraft Tools
are generously
offering one of
these high-quality
leather aprons
as a prize!
M
ade from genuine leather with
an additional surface wax coating
for higher durability. Reinforced
straps with full-metal copper hardware.
Big kangaroo pocket together with
additional chest pocket to give plenty
of storage. Apron Body length 75cm, I thought you may like to see this carving idea. The size is 12in in length by 8in width
waistband 60cm wide with adjustable I have just finished – I liked the idea of and 8in height. The carving is made of lime
neck strap and an adjustable waist strap the money box carving in the magazine with a mahogany base.
up to 120cm, great for woodworking. and this is my interpretation of the same Regards Alex Garfield
Helps to keep yourself clean and safe in any
situation within your workshop. RRP £169,
available as part of the extensive range of
BeaverCraft tools and accessories from Eagle eyed
www.beavercrafttools.co.uk

To be with a chance to win, please email

your name, address and phone number
to WCEditorial@ thegmcgroup.com. The
closing date for entries is 30th December
and the winner will be announced in the
next issue. BeaverCraft Tools will contact
the winner of the draw to arrange the
delivery of the apron.

I haven’t done a lot of carving over the past pandemic I have been working with antique
year. I demonstrate at a local plantation carousels. I am the National Carousel
museum. https://hendersonhallwv.com. Association (NCA) President and NCA
I’ve been working on an eagle during the Census Chairman. www.carousels.org.
demos. I find a large carving using large As Census chair I maintain and NCA database
tools allows a better experience for the of operating carousels in North America.
visitors rather than doing smaller carving https://carousels.org/NCAcensus.html
with knives. Most of my time through the Patrick Wentzel

42 WOODCARVING 184
 FROM THE COMMUNITY COMMUNITY

2021 Carve In 4/5: A huge success

Becky Lusk, Carve In 4/5 Featured Carver, Barb Thompson, a wonderful carver who spends
setting up their display space. most of the day at Carve In @ the Bekkum teaching
carving skills to anyone interested in learning. 

On Saturday, 21 August, an amazing group of

woodcarvers participated in Carve In 4/5 @ the
Bekkum. Because Covid cancelled the 2020 Becky Lusk, Carve In 4/5 Featured Carver,
show, the organisers made this year’s event with her Vesterheim winning carving of cows
‘Frozen’ and Christmas ornaments.
bigger and better than the previous three
by reaching farther into the community of
Midwest carvers. Some came as far as
200 miles to show their carvings and
demonstrate their skills.
More than 50 flat-plane, caricature, chip,
bark and realistic carvers participated in
this year’s event. Becky Lusk, a Vesterheim
Gold Medal Carver, was this year’s Featured
Carver. She worked on an acanthus carving Mike Lusk demonstrating how he bends wood for tine boxes.
throughout the day so people who attended
the show as well as the other carvers could
watch her skilful techniques. Becky’s husband,
Mike Lusk, is co-owner of their business,
Lusk Scandia Woodworks, where he sells an
assortment of handmade wood items used by
rosemalers. Mike also demonstrated at Carve
In 4/5, showing the crowd how he makes bent
wood tine boxes.
Since the first Carve In, the event has grown
every year, attracting more carvers as well as
attendees. Many people come not only to see
the amazing carvings on display but to watch
the carvers and purchase carvings. Several of
the carvers, like Barb Thompson, spend most
of the day helping people learn basic skills to
promote the craft and hobby of carving.
A highlight of the event is the free raffle when
everyone has a chance to win. More than 25
donations from local businesses, as well as many
carving tools donated by various companies, are
always coveted prizes given at the end of the day.
Although the Bekkum Carve In was delayed
by Covid to August this year, it will return to
its regular April schedule in 2022 when we
hope to see you on April 23rd. Event founder
and organiser, John Sutton, announced at this
year’s event that April Bird, a very talented Carving done by Marc Te Ronde An example of bark carving done by April Bird
carver from Madison, WI, will be the 2022
Featured Carver. April carves in many styles
but is known throughout the Midwest as an 2022 Carve In 6
exceptionally talented bark carver. We are When: April 23, 2022 at 10am – 4pm.
sure many will be coming to see her and the Where: Bekkum Memorial Library 206 North Main Street, Westby, Wisconsin 54667, USA
rest of the carvers who have already signed up Admission: Free – donations encouraged
to participate. Email: lbarnfarms@ gmail.com (John Sutton) bekkum@wrlsweb.org

WOODCARVING 184 43
Selecting timber for carving
Steve Bisco shows what defects to look out for when choosing wood for projects

PHOTOGRAPHY BY STEVE BISCO (EXCEPT WHERE STATED)

W hen we first embark on the hobby
of woodcarving, we probably focus
more on the carving than the wood,
but there are a number of common defects in
wood that can cause problems when carving
and disfigure the result, so it is important to
choose wood that is free from these issues.
This short article gives you a brief,
practical overview of what to look out
for when buying wood for carving. For
simplicity, I am focusing on oak and lime,
these being the most commonly used
carving woods in the UK, but the same
principles apply to many other woods.

Sourcing and drying options

Timber naturally shrinks as it dries, and
the degree of dryness affects the stability
of the wood. You can buy wood as:
Green: freshly cut or in the
early stages of drying
Air-dried: dried naturally in
the air for several years
Kiln-dried: dried quickly and thoroughly
in a controlled manner in a heated kiln. 1
This is a good flat ‘green oak’ board from an estate sawmill with fairly straight grain and only one small knot
Wood you buy at estate sawmills and
wood fairs will mainly have been cut within
the past year or two and will be green or
partially dried (photo 1). These boards are
generally good value, but see the advice
below concerning warping and cupping.
Specialist craft wood suppliers can usually
supply kiln-dried stock up to 100mm thickness
(kiln drying only works up to this thickness)
and some thicker, air-dried stock for sculptural
carving. This will usually be fairly stable.
Specialist commercial hardwood
suppliers can supply top quality kiln-dried
hardwoods, but they are expensive. 2 3
Oak is easiest to carve if it is ‘green’ or This oak board has noticeable knots and shakes in several Knots tend to have deep splits and very distorted grain,
air-dried for about three years, but warping places and only one-third of it is usable for carving which would disfigure a carving
can be an issue. Kiln-dried oak is more
stable but can be quite hard and brittle.
You have to decide how much warping
you can tolerate in your project.

Knots, shakes and

other problems
Generally, carvings do not benefit from the
elaborate figuring, burrs or knots that may
be attractive for woodturning and veneers.
Such features distract the eye from the
carved pattern. Carving wood generally
needs to be fairly straight-grained and free 4 5
of conspicuous markings, and other parts Knotted areas of ten go deep into the wood and are On many woods, like this oak, the sapwood (right of picture)
of a board should be discarded (photo 2). honeycombed with splits, hollows, bark inclusions is paler in colour than the heartwood and will show up in
and sof t wood the carving
Knots are a particular problem as they
compromise the structure of the wood. They
are harder than the surrounding wood and and these may cause movement after carving. Sapwood, the outer layer of the tree, is
have a distorted grain pattern, frequently with Knots often go right through the board and, often paler and softer than the heartwood,
deep splits and hollows (photo 3). The wood in the case of burrs and other very knotty especially in oak, and this should generally
around the knot often has latent tension and areas, the subsurface wood is honeycombed be excluded from the carving (photo 5).
compression strains, being the site of a branch, with fissures and sapwood (photo 4). Sapwood is also prone to woodworm.

44 WOODCARVING 184
 SELECTING TIMBER FOR CARVING TECHNICAL

Warping, shrinking and cupping get for stability. It is, but it is cut in a way that Gibbons style, which are often built up in
As timber dries the fibres shrink more in produces a lot of waste and it is therefore several layers. Lime wood varies from pale
their width than in their length, and the very expensive. It is normally reserved for cream to a pinky-brown, often with grey
newer wood near the outside of the trunk top-quality furniture and I’ve not found and darker brown streaks when cut
shrinks more than the older wood in the it easily available for carving projects. from the outer edge of the branch
middle. Exposed end grain at the ends of Warping needs to be avoided on flat panels, (see photos 11 & 12).
boards allows the end fibres to shrink more but it is less noticeable on pierced carvings On other woods, an uneven colour over
than those further into the board, causing with irregular edges (photo 10). It is of very the panel surface may impact on the
‘shakes’ to develop at the ends (photo 6). little importance in lime wood foliage carvings, appearance of the carved pattern. w
Most logs are sawn ‘through and through’ which are made up of very thinly carved
from the circular trunk, working from top to sections assembled together (photo 12).
bottom (photo 7) so the radial grain varies
in each board. In the middle of the log the Colour differences Further reading
radial grain will be roughly at right-angles to Individual pieces of wood can have significant The characteristics of various species of
the surface of the board, and these boards colour differences, even from the same tree. wood, and the way in which it is sawn,
are less likely to warp (photo 8). At the top This is not usually a problem if the carving dried, and milled is a huge subject, far
and bottom of the log, however, the radial is made from just one piece of wood, beyond the scope of this short article,
grain is at a tangent to the board surface, or if it is to be painted or gilded, but it can so I strongly recommend that you buy
and these boards are likely to warp into a be detrimental on bare-wood carvings Terry Porter’s Wood - Identification
bow shape, known as ‘cupping’ (photo 9). made from more than one piece of wood. and Use (GMC Publications), which
You may hear the word ‘quartersawn’ This is a particular problem with will both fascinate and inform you.
bandied about as being the best timber to lime wood foliage carvings in the Grinling

8
The radial grain on this board is mainly at right-angles to the
PHOTOGRAPH BY SHUTTERSTOCK surface, minimising distortion on this flat Gothic panel

6 7 9
Thicker timbers will usually show shrinkage shakes at the Most boards are cut straight from the circular trunk, Boards cut furthest from the centre of the trunk are prone
ends, even when sealed, so cut off and discard the ends working from top to bottom, so the radial grain varies to ‘cupping’ as the outer growth rings shrink more than the
before use in each board inner ones

10 11 12
Warping is not so much of a problem on pierced panels Many pieces of wood differ in colour, even from Colour differences can be problematical in bare
with convoluted edges as it tends not to show the same tree, as in these lime wood sections wood lime carvings made in several layers

WOODCARVING 184 45
Next issue 185 on sale 13th Jan 2022

Carve Mark Gough’s

beautiful howling wolf
Peter Benson puts together
a travel kit for carving on the move
Steve Bisco discusses common
issues with grain

Zoë Gertner carves Dave Western introduces

ammonites, us to Swedish ‘avugstjed’
great & small (reverse) spoons

WOODCARVING 184 47
Carved trivet
A burnt ring on a table tells many stories for Kevin Alviti…

hen my wife and I bought our try to eat us out of house and home, I’ve had bit more fragile than if I’d done them in

W first house we’d maxed out our

budget and although we’d both
been saving things for our ‘bottom drawer’,
we were still short of many items. A dining
to buy bigger pans to cook the quantities they
demand, so need bigger trivets to match and
protect my homemade oak kitchen table.
I’d seen some beautiful old carved trivets
a slightly lower relief and harder wood.
Twenty years as a carpenter and I can
still pick the wrong wood for a job.

room table and chairs were among the more around and always thought they’d make a
major items, so we hunted through all the great project as I could have the size I wanted.
local secondhand and antique shops until I always keep a folder of interesting designs
we found a set we could afford. It was cheap, and pictures I’ve seen that might inspire a
as dark wood was far from fashionable at future project. One that I kept going back to
the time, and had carved, sweeping legs. was William Morris’ (from the Arts & Crafts
Our first meal with friends showed us movement) Lily & Pomegranate design
something else we were lacking. I put out all I thought that a simple design influenced
the hot food in containers on place mats so by this would work really well – it should
people could help themselves. Now, I’m not also fit his ethos of: ‘Have nothing in
sure what these place mats were made from, your house which you do not know to
COURTESY OF THE BROOKLYN MUSEUM

but it turns out they conducted heat better be useful or believe to be beautiful.’
than some of my grandma’s old aluminium For the project, I sorted through my
pans. When they’d left and I tided up we had offcuts and stumbled upon some lime,
some huge rings branded on our ‘new’ table. which I knew would carve easily. I have
I learnt from ‘our’ mistakes (my wife says the to confess that, in hindsight, this might
mistake lies solely with me) and used trivets not have been the best wood for this
forever more to protect against hot pans. But design. A light wood is going to show
now our family is getting bigger, or hungrier marks and heat damage far easier and
at least, with three children who frequently some of the fine detailed bits might be a

48 WOODCARVING 184
 CARVED TRIVET PROJECT

Things you will need

Materials: • No.8, 10mm gouge
• 190mm x 190mm x 22mm Hand tools: • No.8, 12mm gouge
of chosen wood for carving • 12mm Forstner bit • No.10, 2mm gouge
• 25mm x 25mm x 200mm • Smoothing or block plane • 6mm straight double bevel chisel
of timber for the feet • Tenon saw • 13mm straight double bevel chisel
• No.3 gouge 12mm • No.39, V-tool 60°
Tools: • No.3 fantail gouge 4mm
• PPE and RPE • No.4, 2mm gouge Lathe tools :
• Planer thicknesser (optional) • No.4, 4mm gouge • Roughing gouge
• Pillar drill (optional) • No.4, 6mm gouge • Skew chisel
• Sander • No.4, 14mm gouge • Parting tool
• Lathe (optional) • No.6, 12mm gouge • Narrow parting tool
• No.6, 20mm gouge • Spindle gouge

→
WOODCARVING 184 49
1 Board selection – as with any carving, try
to make things as easy as possible for yourself.
Pick a board with no knots if possible and clear
of any defects. Use the surfacer to plane one
side then thickness down to a suitable depth.
I went for 22mm.

2 I took a bit of time to experiment with

how big the trivet needed to be. I wanted

PHOTOGRAPHY BY KEVIN ALVITI

this to work for my two large frying pans
but not be so huge that it takes up too much
room in storage/display. I cut it down to size,
ending up with 190mm square of wood.

3 Add some centrelines then mark out your

drawing. You can either do this freehand or
do like I did and use tracing paper to sketch 1 2
on to. I drew out my original design on the
tracing paper then turned it over and drew
over the lines again. This leaves a faint outline
on the wood.

4 Go over the drawing again and make

sure it’s how you like it. Some of the finer
details might be left out of the final carving,
but that can be a decision to make while
carving and seeing how the wood behaves.
Now is a good time to secure your work.
I like to make a small jig to hold it with a
simple wedge, this way if I need to rotate
the work I can do so easily.

5 Using the V-tool, start by carving a

shallow line as a border around the outside.
It’s surprising how straight you can keep it 3 4
just by hand.

6 Continue using the V-tool to roughly outline

the flower. I can’t stress enough that it really
only needs to be roughly here, we will outline
properly later so just go somewhere near the
drawing so we can lower the background.
The aim is to eventually lower it by about
6mm, but don’t attempt to do this in one pass.

Lower the background

7 Using a No.6, 13mm gouge, start to lower
the background. As I wanted the background
to be heavily textured, I wanted the
background to fall from the border towards
the detail in the middle. Try not to make too
heavy a cut in one go, start near the carving
and then work back. I did this in two steps, 5 6
going back to outline again once I’d removed
some of the background then removing more
background. This is the perfect time to rotate
the carving as you work your way round it.

8 Now is the time for some better outlining.

Using chisels to match the curve where
possible, use slicing cuts to outline. I use my
upper body weight and gently push the chisel
forward, lifting the front edge at an angle,
almost like a knife.

7 8

50 WOODCARVING 184
 CARVED TRIVET PROJECT

9 These slicing cuts are so important.

Don’t think that by just pushing the
chisel downwards or striking it the wood
will hold on to its detail. The smaller, finer
bits like the tips of the flowers will easily
break if you do. Controlled slicing cuts
let you work through the wood slowly;
reducing the risk of bits breaking off
(ask me how I know…).

10 While cutting the sides fairly vertical, try

to remove as much background as possible
between the details. I used my smallest
gouges here – I found a small, No.4 fantail to
be ideal to get in the gaps, as well as a No.4,
2mm gouge, but use what you have to try to
9 10 clear the background.

11 When you feel you have outlined enough,

it’s time to turn attention back to the
background. As we have already lowered it,
now it is time to use a flatter chisel and start
levelling the ridges left between the gouge
marks. Because it’s outlined properly, the
background can go right up to the carving.

12 Using a narrow, U-shaped veining chisel,

in this case a No.10, 2mm, start creating
grooves in the background. I angled mine
all, roughly, to the centre, making long,
steady cuts. This way it creates a feature
but not one that is too overpowering. With
the skew chisel or the small fantail, then
go round and nick off these shavings where
11 12 they meet the carving.

13 While creating these grooves, make

things as easy as possible for yourself by
rotating the workpiece round rather than
having to work at odd angles.

14 With the background now semi-complete,

it’s time to start shaping the carving. I started
on the largest flower, shaping the outsides
to slope down towards the background and
create the impression that it’s a 3D shape.

15 The middle petal is set in from the ones

either side of it. Using a gouge that matches
the shape, here a No.8, 10mm, press down
into the wood and then, using a flatter
gouge, cut the vertical lines upwards as
13 14 well. Lower the middle section slightly to
give the appearance of depth.

16 Working your way down the carving,

now start to shape the other two flowers
and the leaves. Slice across the leaf and then
lower one side of it using a small, shallow
gouge (No.4, 6mm) to give the leaf some
movement and twist. I marked the high
points of the carving with shading so I
wouldn’t get confused and reduce the
wrong area.

15 16 →
WOODCARVING 184 51
17 As this is quite a symmetrical piece,
I suggest doing one part of one side,
then it’s a mirror image. It doesn’t have
to be perfect, the eye is surprisingly
forgiving when it comes to symmetry.
Make sure you round over the stem,
I used a No.3, 4mm fantail, and I also
added a rib detail to the middle set
of leaves. You could detail the leaves
much heavier than this if you liked.

18 When you are happy the carving is

complete (sorting out the background
to stop it looking whispy and to make
it clean is what takes the time), add
a chamfer around the outside to
soften the edges, also remove the 17
arris from the back side. You could use
a router for this but it’s easily done
with a sharp hand plane (and if, like
me, you like to justify your purchases
of vintage wooden planes…).

19 You could leave the project there

and finish it, but I wanted to add some
small feet to keep it off the table.
Obviously, these could be carved by
hand, but turning them on the lathe
was a fairly quick job to do. Start
by getting some 25 x 25mm timber,
marking the middle and mounting
it between centres on the lathe.

20 Rough the blank into a cylinder

using a roughing gouge. I turned 18 19
mine to 25mm diameter.

21 I take any opportunity to practise

with the skew – so make the cylinder
as smooth and even as possible using
this tool. If you struggle, sometimes
raising the toolrest slightly can help.

22 Now mark 10mm increments on the

blank. I think it’s always wise to turn
a couple of extra feet with something
like this if you have enough wood, so
mark enough for six. Each foot will be
10mm deep and have a 10mm tenon.

20 21

22

52 WOODCARVING 184
 CARVED TRIVET PROJECT

23 Set a gauge to the width of the drill

bit you’ll be using as a mortise, I used
12mm. Then, with your parting tool and
gauge, turn down every other section
to this width to create the tenons.

24 Using a spindle gouge, round over

each foot. This tool can take some
practise but it is used in a sweeping
and lifting motion and it is fairly easy
to form the round-over required. Sand
these edges up to a smooth finish.

25 Either use a thin parting tool to

gently thin out between the feet
you’ve just created to help with
23 separating them or just take it
from the lathe and saw between
them. Sand up any cut edges.

26 Set up the pillar drill with a 12mm

Forstner bit and set the depth to make
sure it will go no deeper than your
carving – 10mm was perfect for
mine and allowed enough room
for the tenons on the feet with
no trimming. I set them in 20mm
from each side as I didn’t want
them to be seen from above.

27 Fettle any feet that won’t quite fit

in their tenons if they need it. Make
sure the back is sanded and clean of
any pencil marks. Then glue all the
24 25 feet in place. If they are a tight fit
there should be no need for clamps.
Check that the trivet sits flat on the
ground and doesn’t rock on its legs.

28 Apply your finish of choice

using a brush to get into all the
heavily detailed areas. w

FINISH
This is a potential minefield. I ended
up using raw linseed oil on mine, which
will take a long time to dry. I know that
the hot pans will darken the wood with
age, and I’m fine with that. I’d be fine if
they even got burnt around the edges
26 27 as I feel it would soon build up a lovely
patina of colourations and show it is a
used item. But I understand that it’s
not the look everyone wants. Many
of the woodworking forums have the
question of heat-resistant finishes
and don’t come up with many answers
other than some in the States using
what they call ‘mineral oil’, as it’s a
non-drying food-safe oil. Mineral oil
is sold in the UK as liquid paraffin wax
(often in animal feed stores as laxative
for cows). As it’s petroleum derived,
even though it is food safe and widely
used (especially for chopping boards),
I’m not that keen on using it. It might
be one for some experimentation,
but I feel oils that soak in rather than
sit on the surface will do better.
28

WOODCARVING 184 53
Sharpening clinic –
adze you like it
Nic Westermann sharpens an adze

PHOTOGRAPHY BY NIC WESTERMANN

his month’s article finds me attending the Bowl Gathering, a We had some superb freshly felled beech to use, and it was nice

T festival celebrating the handmade wooden bowl and other

related treen. I was looking forward to trying out a few large
adzes I had forged, doing some final tweaks on the edge-to-handle
angle. This is absolutely critical with adzes – a degree either way can
to put on a ‘have a go’ session for two reasons – first, there’s a lot
to hollow in bowls this size and many hands make light work,
and second, watching other people use my tools teaches me a
lot. The bench the bowl sits on makes a difference to how an
make a huge difference to how they cut. As I was saying to some other adze handles and watching carvers of different heights taught
smiths, there are no bad adze heads, only badly fitted handles. me more about the ergonomics of the set-up as whole.

54 WOODCARVING 184
 SHARPENING CLINIC – ADZE YOU LIKE IT TECHNICAL

I was hoping I would find a tool

in need of sharpening that could be the
subject of this article and I wasn’t
disappointed. I have to say though that
the response from you, the readers, to my
call for blunt tools in need of attention
has been underwhelming, so if you have
a tool you would like to be featured in a
future article please do get in touch. I have
had feedback that as I run a professional
workshop, I was using tools not available
to everyone, so thought it would be good
to take the sharpening clinic outside. I
brought a basket of likely looking abrasives
but would have to make do with what I
could find or borrow this time round.
Rosie Mockford has been woodworking
for about three-and-a-half years. She
teaches spoon carving and green woodwork
for Cotswolds National Landscape on its
Rural Skills programme. She supports
Even a perfectly set up adze won’t feel good if the bench is the wrong height for you Dave Cockcroft to run the Gloucestershire
Spoon Club. Rosie assists on courses and
events at Brook House Woods. She also
teaches independently and is passionate
about increasing access to green woodwork
for people who might not typically have
access. To this end, she also works with
Pathcarvers. Rosie has received support
and mentoring from Dave Cockcroft,
Yoav Elkayam and Amy Leake among
others and is forever grateful for this.
Rosie had been given a Svante Djarv
adze by Aimee, who was also attending the
bowl gathering. It was lovely to hear that
she had been gifted a large selection of
tools from a third carver who was reaching
the end of their career, and she chose to
pass on this bounty to carvers who would
make good use of them, as I know Rosie
will. The Bowl Gathering, while not free to
Svante Djarv adze as Rosie received it attend, is refreshingly non-commercial,
people share knowledge and it seems tools
freely. It is my favourite show of the year.
The adze was an early example of
Svante Djarv’s work and I could see
it needed a bit of attention.
First I did some test cuts to establish a
baseline – I was pleased that the original
correct handle-to-edge geometry was still
intact, as the tool basically swung well, neither
burying into the wood nor bouncing off the
bevel. This is quite an involved topic, and
I could write a whole article on setting up,
testing and altering this vital interaction.
These test cuts were okay, you could see a
few track marks which corresponded with
the nicks that could be seen in the edge. But
Nicks in the edge – in this case the edge the adze was quite blunt and didn’t cut very
damage was plain to see far with each stroke, so it was hard
to join to make a smooth coherent
groove as was my aim.
However, even with the edge sharpened
and the nicks removed I felt that the long,
flat bevel would hinder the adze carving
a deep hollow. There have been so many
images in previous articles about flat
bevels binding in a concave surface and
how to convex a bevel without altering
the edge angle that I will spare you more.
Of ten a test cut will show up edge dependencies Ridge formed by the back of the bevel Instead, I have some close-ups of the
that are not easily seen on the tool itself that needs to be removed actual tool and the way I achieved this. →
WOODCARVING 184 55
Rough grinding outside bevel Grinding the inside bevel

Back of the bevel blended in without altering the edge angle Inside bevel rough ground

I wanted to remove the step at the back of the

bevel, and, although this could have been achieved
with a file, or even an angle grinder, it turns out
I had easy access to a ProEdge (as ever) and so
used that. I concentrated on this ridge, only just
wanting to kiss the edge on this coarse grit, all I
was aiming to do at this stage was create clearance,
the actual surface finish really doesn’t matter.
I then ground the inside bevel, which was
actually quite steep and so pretty short.
This needed little work, I was just trying to
clean this up and take out the obvious nicks,
again there was no attempt to change any
angles. I used a cordless drill clamped in a
vice, using one of our H&H abrasive wheels
and universal mandrels, as ever working with
the wheel moving away from the edge, which
is imperative when you use felt wheels.
This set the basic bevel geometry, the
geometry of the edge was untouched at this
stage. Next I refined the grinds on the inside
and outside using finer grits, and finally I
used a felt wheel to polish out the remaining
scratches. I had only brought convex wheels,
which weren’t ideal for polishing the outside of
the adze as the contact point was very small,
but it was still easier than stropping by hand. Polishing inside bevel Polishing outside bevel

56 WOODCARVING 184
 SHARPENING CLINIC – ADZE YOU LIKE IT TECHNICAL

This process was relatively quick, the whole

thing – including taking numerous shots
at every stage with my phone steadfastly
refusing to focus (due, it turns out, to a cracked
lens) took only an hour and a quarter. Test
cuts were then taken, and you can see how
the track lines had disappeared and the cut
was a lot cleaner, joining up to make a smooth
groove. In all honesty, the groove we cut was
fairly straight, as it was a big bowl, this meant
the clearance created by blending in the
outside bevel wasn’t really needed. However,
small, light adzes like these will often be
used on smaller-diameter bowls and at that
point the clearance will be needed. You can
see just such a bowl Rosie carved with the
freshly sharpened adze. The Bowl Gathering
was a wonderful festival to attend. It was
really fulfilling to breathe life into an older
tool and then see what it can go on to create,
hopefully for many more years to come. w

The polish is nice but incidental really, the smoothed outline helps the adze to hollow efficiently A marked improvement in the cut af ter sharpening!

THE SHARPENING CLINIC IS OPEN of the article and send it back to you at my expense.
As the name suggests, I would like to help carvers with Turnaround will be up to a month as I will need to get the
sharpening problems – this will allow me to focus my tool well before the deadline to be certain I can fulfil my
articles on tools that are relevant to you, the readership. obligation to WC of turning in a quality article each issue.
What I am looking for is readers to send a brief If not selected, please do not send me your tools. I don’t
email with a description of the tool, the sharpening have time to sharpen them in my day-to-day business,
equipment they are using and problems they are and I don’t have the budget to return them to you if you
having. Please do not send images at this stage do. Also, due to the timescales involved with overseas
as it clogs up my email system far too quickly! post currently, this is only open to carvers in the UK.
I will try to answer all emails but will only be selecting If you are interested, and I hope you are, then please
one tool per article. You would then send the tool to me email me at nic.westermann@btconnect.com
at your expense, I will sharpen it and make it the subject

WOODCARVING 184 57
Cherry crab bowl
The shape of this common crustacean lends itself perfectly to a bowl decoration, says Zoë Gertner

ne of the childhood joys of seaside holidays is to go the process, they steal food from each other and squabble with one

O crabbing off the quay. Armed with fishing lines,

pieces of breakfast bacon and bits of fish, as a
child I spent many happy crabbing hours with friends,
when the days seemed long, sunny and carefree...
another. Their gait is odd – it’s sideways because their leg joints are
designed to swivel so they can creep easily into rock crevices and
cracks to hide; and perhaps also so they don’t tangle their legs
together as they move about in the rockpools. That said, being
Crabs are not nice characters. They scavenge, fight each the shapely scavengers of the seabed, crabs have a fascination
other with their large claws, sometimes losing one during of their own and my ‘generic crab’ will fit nicely inside my bowl.

PREPARATION
From my collection of lovely, chunky
wooden bowls that I acquired some
time ago, their shapes somewhat
distorted over time, I chose one
of a pair that had been turned in
cherry wood, approximately 15in
diameter and about 2in thickness,
including the rim. Accumulated dust
and debris was removed with a soft
brush and a damp lint-free cloth,
ready to draw the crab inside it.

58 WOODCARVING 184
 CHERRY CRAB BOWL PROJECT

Things you will need

Tools: • No.5, 1/4in and 1/8in gouge • Round punch
• PPE and RPE • No.7, 8 or 9, 1/4in gouge • Light hammer
• No.39, 1/4in and 1/8in V-tool • No.2, 1/4in skew chisel • Scraper (optional)
• No.3, 1/2in, 3/8in, 1/4in, 1/8in gouges • Nail punch

Starting the carving

1 When carving a bowl of this size I prefer
not to use a vice to secure it, but to rest it on
a non-slip router mat, nestling it within four
sandbags so it can be turned quickly and easily
when I need to change the direction of my cuts.

2 Trace or draw the outline of the crab and

secure it inside the bowl, preferably with the
grain lying horizontally. Using masking tape
to hold the drawing, place some transfer
or carbon paper beneath, ready to transfer
the design to the surface of the bowl. Use a
different coloured pencil/pen for tracing the
drawing on to the surface and you will easily
see the lines you are drawing and whether
any have been missed. Check the result
1 2 inside the bowl and correct it if necessary. →
WOODCARVING 184 59
3 The outline of the crab can be cut using the
No.39, 1/4in V-tool, cutting towards the centre
of the bowl from each side, thus with the
grain, where possible. It is quicker and more
controlled to use a mallet with your V-tool,
holding the tool well down the blade so that
your hand is close to the cutting edge and
resting your wrist and forearm on the work.

PHOTOGRAPHY BY ZOË GERTNER

4 The crab will now be relieved using sets
of opposing cuts. The first set is made by
cutting around the legs, claws and shell
using No.3 gouges. Rest the cutting edge of
the gouge so it is angled against the inner
edge of the V channel marking them, and
continuing the angle downwards, away from
the crab. Be sure to turn the gouge when 3 4
necessary so your cut matches the shape of
the line you are cutting. The first set of cuts
is always made before making a second set,
the opposing cuts, producing a V channel
around the outline which protects it when
the background is removed later on.

5 The set of opposing cuts is made starting

from a short distance away towards the
first set at the same depth and angle where
possible. Holding the gouge with its bevel
underneath its cutting edge, carefully
remove the outer edge of the V channel to
the depth of the initial cuts around the crab.

The background
6 Using the No.3, ½in or 3/8in gouge, begin
your cuts at the middle of the concavity and 5 6
work your way back up the sides, overlapping
your cuts and cutting towards the centre of
the bowl from all round until the whole inner
surface has been tooled. Repeat with shallow
cuts from the opposite side until the original
turned surface has been covered with a shiny
‘beaten pewter’ effect around the crab.

The legs and claws

7 Use the appropriate width No.3 gouges and
re-cut around the edge of the shell, inverting
where necessary to adjust its shape.

8 Reduce the surface of the legs and the

claws next to the shell so they lie beneath
its edge, deepening the background close-
by if needed. With the No.3, 1/8in gouge,
tidy up the spaces between the legs and 7 8
the edge of the shell and mark in the first
articulation across the top of each leg.

9 Invert the gouge and round over both sides of

the legs with the No.3, 1/4in gouge. By rolling the
gouge across and over the leg from each side, cut
in the rest of the lines of the articulations along
it. Reduce the lower edge of each articulation
so it lies beneath its upper edge. At each side
of each joint in the angle between it and the
background, tilt the corner of the 1/4in or 1/8 No.3 to
cut a clean edge, or use a No.2, 1/4in skew chisel.

The claws
10 Round over the edges of the claws. Cut the
articulations and reduce the adjacent surfaces
of the lower one to lie beneath that above it.
Then smooth the surface of the large claws so
that they contrast with the tooled background. 9 10

60 WOODCARVING 184
 CHERRY CRAB BOWL PROJECT

11 Reduce the ends of the pincers.

12 Then, using the No.3 or 5, 1/8in gouge,

cut the indents along their inner edges,
inverting the gouge as necessary to
shape them, and carefully remove the
adjacent background between each
indent and between the pincers.

The shell or carapace

13 Round over the edges of the shell with
the No.3, 3/8in or 1/2in gouge then, with the
No.39, 1/8in V-tool, mark the eyes. As described
before, use opposing cuts to relieve them
by making the first set using the No.3, 1/8in
gouge inverted around each, then with the
11 12 No.3, 1/4in gouge, bevel beneath the cutting
edge to remove the adjacent surface of the
shell. Deepen the background in front of
the eyes if necessary then, with the No.3
gouges, round each eye into a prominent
convexity ready to mark the eyeballs.

14 Around the back of the shell draw the

‘piecrust’ edge, the indents or tubercules
being smaller between the eyes and larger
behind each side of the shell. With the No.7,
8 or 9, 1/4in gouge, cut a shallow groove as far
as the first leg each side, matching the path
of the groove to the shape of the edge of the
shell. Then, using the No.3 or 5, 1/8in gouge,
carefully refine each indent along the edge of
the shell, finishing each by scooping a small
hollow within it to form the piecrust edge
13 14 along both sides from the eyes to the first leg.

15 On the surface of the shell cut two

shallow grooves running from the back
towards each eye to form three lobes, then
smooth the surface of the shell so that it
contrasts with the tooled background.

16 Starting from the first leg, at the end

of the piecrust on each side, cut a V line
using the 1/8in V-tool, meeting the cuts at
the middle of the back of the shell. With
a nail punch and light hammer, make a
series of dots within the V channel around
the back of the shell as decoration.

Finishing the eyes

17 Smooth the surface of each
15 16 eye, making sure it is rounded and
prominent, then mark each eyeball with
a hole punch and light hammer.

18 Draw the two pairs of feelers between

the eyes and mark them using the 1/8in V-tool.
Start with a shallow cut from each outer end
and work towards the shell, deepening the cut
as you approach the shell so that the feelers
widen where they join the shell. The two outer
ones are usually longer than the inner ones.

Final touches
Erase your pencil marks and check all
meeting edges are cleanly cut and there are
no spaces in the tooled background, that
each tooled cut is polished and shiny and
the crab shell is smooth. I used a scraper
to smooth the rim and outer surface of the
17 18 bowl then a light wax polish for its finish. w

WOODCARVING 184 61
The wonder of winter
The intricate design of a snowflake makes for an absorbing chip carving project, by Tatiana Baldina

PHOTOGRAPHY BY TATIANA BALDINA

nowflakes are one of the wonders of winter. They are always I show you how to carve my version of a snowflake pattern.

S different. It’s amazing, but no matter how hard you try,

you can never find two alike in the whole world. In this article
It looks complex at first glance, but following certain steps,
I hope you enjoy carving it.

62 WOODCARVING 184
 THE WONDER OF WINTER PROJECT

Things you will need

Materials: Tools:
• Basswood board with • PPE and RPE
transferred design (a radius • Skew knife
of 12cm, 1.5cm thickness) • Sandpaper or leather
strips for sharpening

UNDERSTANDING DEPTH
One of the challenges in chip carving, when you are just starting to carve or have not developed enough muscle memory yet, is to
understand where the tip of the knife currently is and how deeply you undercut this or that facet. Sometimes, but at the initial stages
usually, you think you didn’t push the tip of the knife deep enough into the wood and you would have to do it a little deeper. If you have
such ‘problems’, I suggest that, before carving the pattern of this box, you experiment: draw several triangles of different sizes, make stop
cuts inside each of them, and then start to undercut the facets a little, one by one until they pop out. And you will see that there is no need
to put so much pressure on the knife and push it deep into the wood to completely remove one facet when carving the usual sized chips.
→
WOODCARVING 184 63
Preparatory steps
Before you start carving the main figures of
the entire pattern, it is necessary to carve a few
preparatory chips – namely, the straight-wall
chips that go along the perimeter of a circle,
both in the shape of a triangle and two-sided
ones, with one rounded side; and also two-
sided chips that separate the main figures
from each other. I will show the example of the
carving on the top left quarter of the design.

1 Start carving the first straight-wall chip,

which is in the shape of a triangle. Hold the
knife directly above the sides of the chip at
about 90° to the surface of the board, then
gently push the tip of the blade deep to the top
of the triangle, where the facets meet. Without 1 2
removing the knife from the wood, lower the
heel of the knife to the base of the chip, to its
third side, without applying any pressure.

2 Lay the knife blade low to the surface of

the wood along the bottom of the triangle
and push the knife towards the top of the
triangle where the sides intersect at the top.

3 The second chip is two-sided. Cut the

rounded sides at about 90°. After you have
done this, undercut the base in the same way
as you did when carving the straight-wall
chips. The last step and the last chip to carve
in order to start carving the main figures, is
an oval or two-sided chip, which is located
between the main figures of the design.
3 4
4 Make stop cuts inside the chips. Place
the tip of the knife at one of the tops of
the oval, then start to lead it to the other
top. The deepest part of the undercut is
in the middle of the chip. In the places
that are closer to the tops, there is almost
no pressure when undercutting.

5 Place the knife at the edge of the chip at

about 60° to undercut the sides of the chip
until they pop out. If this does not happen
the first time, you will have to repeat the
cuts or make stop cuts to sever the wood
fibres again in the centre of the chip.

The main figures of the pattern

6 Start carving the main figures of the
pattern from the one that is in the large 5 6
triangle with rounded sides and a pointed
top. Undercut the sides using the same
technique you did with the sides of the
straight-wall chips. The deepest cut is there
where the top of the double-sided chip is.

7 The central lines in the main figures of the

pattern are the edges or the highest points
on the entire pattern are on par with the
surface of the wood. The sides are carved
inward, like bases or third sides of straight-
wall chips. There are two ways to undercut
the sides: the first technique, shown in this
photo, is to undercut everything in one go.

8 The second way is to carve the large surface

of the chip in two steps. When undercutting
in this way, first you have to remove a small
part by grabbing about 2mm of the chip… 7 8

64 WOODCARVING 184
 THE WONDER OF WINTER PROJECT

9 …and then, by keeping the same

angle, carve the entire side completely.
When the first shape is done, repeat
all the steps on the second figure.

10 Then, start carving the

next thin figure.

11 Undercut the sides the same way as

for straight-wall chips, but the pressure
you push the knife into the wood with
will be the same around the entire
perimeter of the sides of the chip.

12 By following the grain direction,

repeat the steps you took to
9 10 carve the first figure: either do
it in one go or in two steps.

13 Next, carve triangles or three-

sided chips that go around the outer
line of the central pattern. Make
stop cuts inside each triangle.

14 Then angle the knife at 45° around

the edge of the triangles to remove
the chips one at a time. Carefully
undercut the sides that connect to the
short sides of the thin figures of the
pattern. In this case, you can apply the
technique of undercutting a chip in
two steps to avoid chipping the edges.

15 Prepare two triangles for

11 12 carving inside the wide shape:
mark a dot 0.2mm from the short
side of the figure and draw the
first line parallel to it by hand.

16 Draw one curved line…

17 ...and then a second curved line,

as shown here. Start carving the
prepared straight-wall chips by
undercutting the inner sides. In this
case, the base of the chip is the long
outer side, and the top and deepest
point is where the short side of the
chip and the inner long side intersect.

13 14

15 16 17 →
WOODCARVING 184 65
18 Undercut the short side and then
the long one by gently leading the
tip of a knife to where two straight-
wall chips meet each other.

19 By following the grain direction,

undercut the base of the chip.

20 The last step in carving the

main pattern is to make four cuts
on the wide figures. Mark a dot
3.1cm from the centre of the board,
then freehand extend the lines to
the carved sides of the figure.

21 Make a stop cut on the

resulting line with the tip of 18 19 20
the knife perpendicular to
the surface of the wood.

22 Undercut the first

chip at about 60°…

23 …and then start carving

the second one.

24 Change the knife grip

in your hand and finish
undercutting the second chip.

25 The remaining two cuts you

have to do are at the top of the
figure. Make a stop cut with the
tip of the knife perpendicular
to the surface of the wood … 21 22

26 … then two undercuts at about 60°.

Central pattern
27 The next pattern to carve is the
central circle. You need to prepare the
surface for carving the chips. Make
a cut around the perimeter with the
tip of a knife at about 90°. The depth
of undercutting is about 3mm.

28 Make long, straight cuts at the

same angle as for carving the base
or third side of a straight-wall chip,
and follow the grain direction…

23 24 25

26 27 28

66 WOODCARVING 184
 THE WONDER OF WINTER PROJECT

29 …to undercut the surface.

30 Next, draw perpendicular,

central and diagonal lines on the
resulting smooth surface.

31 Mark two dots 2mm to the

left and right sides from the
central and diagonal lines, draw
triangles by eye and freehand.

32 Then carve the three-

sided chips at about 45°.

33 Mark the dots 0.7mm on clean

surfaces from the centre of the pattern.
29 30 31
34 Next, by eye (or after drawing)
make two undercuts at about
60° to make two-sided chips.

Snowf lake rays

35 Make stop cuts inside the triangles.

36 Then undercut each side

of the chips at 45°.

37 Next, start on the line carving. First,

for example, undercut the first line
1mm from it on the right at about 60°.

38 Then make an undercut on

the second line, next to the first
one which overlaps it, by slightly
32 33 grabbing the first line with the tip
of the knife to avoid chipping.

39 Finish the line carving. The

first quarter of the pattern is now
done. Next, carve the remaining
three quarters of the design to
complete the snowflake. w

34 35 36

37 38 39

WOODCARVING 184 67
Carving
Countries
William Barsley
visits the carvers of Bali

I
n this new series, William Barsley
looks back on the journey that
inspired his career change from an
office job to a professional woodcarver.
This article focuses on his visit to the
beautiful island of Bali, which has a rich
heritage in woodcarving and is where
William began this adventure to explore
woodcarving around the world.
 DIARY OF A PROFESSIONAL WOODCARVER FEATURE

Carving with Mr Mudana, trying not to chop my toes off! →

WOODCARVING 184 69
Why Carving Countries?
It was 2014, I was 25, and I felt I had chosen
the wrong profession in life. The pressure
to choose a career had weighed heavily on
me since school, and I found it impossible
to pick a direction. I had completed a
degree in International Development and
found myself in a good job working for
the United Nations in Rome. However, I
wasn’t happy and found long days at the
desk mentally and physically challenging.
I’d been interested in woodwork from
a young age, finding a huge amount of
satisfaction in whittling and creating
something with my hands. I discovered
woodcarving in 2009 and, since then,
had harboured a crazy dream to make
that my sole profession, but it seemed too
risky at the time. I later began reading
stories of old journeymen who used to
travel huge distances to learn and practise
different crafts. Inspired by these tales,
I decided to take a leap of faith and set Colourful sculptures in the first few days of the trip
off on a journey around the world with
the simple aim of meeting as many
woodcarvers as possible and opening my
eyes to the different techniques, methods,
woods, chisels, and styles of carving.
As keen long-distance cyclists, my
girlfriend (now wife) Lisa and I decided
to try to cycle as much of the journey as
time would allow. We find this mode of
travel the best way to get to really know
a country and its people. Luckily, Lisa
worked remotely so could continue her
job part-time from the road, needing only
power and decent Wi-Fi. Asia had always
interested us and, after a lot of research,
Bali kept appearing as a hotspot for
woodcarvers, so what better place to start?

Ornate temple door, carved and gilded Shrine carving, beautifully painted and gilded

Woodcarving in Bali has a Hindu- Journey

Javanese origin dating back to the 13th- Prior to arriving in Bali I contacted the
14th century, primarily being used as a head of the Bali Indonesian Sculptors
way to elaborately decorate temples and Association, who suggested I visit a
shrines, something that continues to this region called Ubud, located toward
day. It underwent a transformative period the middle of the island. Specifically,
around the 1930s, inf luenced by an art I was told to visit Mas village, which is
movement called Pita Maha. Carvers began where hundreds of carvers are based.
creating themes inspired by their daily Arriving at the airport and after a quick
life, often showing traditional farming rebuild of the bike, we found ourselves
scenes. Mythical gods and creatures also winding through busy streets on our
An effective style of carving on to the roots of a tree appeared, but without the constraints of way to Mas village. I instantly knew we
religious tradition. This allowed for a wider had come to the right place. There were
BALI range of woods to be used, as within a carvings everywhere I turned, from the
Situated in the Indonesian archipelago, religious context only sacred woods were vibrant and colourful temples adorned with
Bali has a population of 4.3 million and is allowed. Carvers’ imaginations ran wild rich decoration to the carved souvenirs
famous for its beautiful beaches, surfing, and more and more creative carvings began that f looded out of the gift shops.
and temples, but it also has a thriving to appear, with craftsmen inspired by the On a visit to the renowned museum of
woodcarving industry that caters to organic shape of each piece of wood and Puri Lukisan in Ubud, which houses work
both the tourist and export markets. keen to let nature dictate their designs. by some of the most famous and inf luential

70 WOODCARVING 184
 DIARY OF A PROFESSIONAL WOODCARVER FEATURE

Carving by Ida Mudana of a goddess and the moon

clients throughout the US. His work is

inspired by natural and mythical themes,
expressed in the free and uninhibited
style of the Pita Maha movement.
I spent three memorable afternoons
carving with Mudana and decided to carve
a mythical goddess as this was a common
theme in his work. He guided me through
the process of roughing out the timber and
finding its natural form before refining
the piece. The immediate difference was
that we were carving sitting on the f loor
with only a thin mat between us and the
concrete. The traditional technique is
to use your feet to hold the piece while
Carvings for sale on the side of the street carving. I would like to say I mastered
this by the time I left but sadly not; the
carvers in Bali’s history, I was fortunate to dexterity and stamina required to sit on
meet the curator, who kindly acted as my a hard f loor all day must take years to
specialist advisor during my time in Bali. build up. Mudana began carving at the
He insisted I find the ‘true’ woodcarvers age of 14 so was well used to it. I, however,
who were still practising the craft as an was in a lot of pain after the three days.
art form instead of those who were mass- The force and confidence in Mudana’s
producing pieces at speed for the tourist chisel strikes were incredible to see, just
market. Eager to learn more and to get millimetres from his feet. We were carving a
carving myself, I was guided to a master section of hibiscus wood, using a small hand
carver, Ida Wayana Mudana, with whom axe to rough out the piece before switching
I undertook a three-day carving course. to chisels. His desire and passion to see the
I soon learned on this trip that there’d be craft continue was amazing to witness and
no better or quicker way to understand a was displayed in his openness to teach others. Ida Mudana at work
country’s carving style than giving it a go
myself under the guidance of a local expert.

Notable woodcarvers
Ida Wayana Mudana
Walking down a quiet side street in the
heart of the village I approached Mudana’s
home and workshop (intertwined with one
another) and noticed a buzz of activity. A
number of apprentices were busy working
on some incredibly intricate pieces. I
soon learned that Mudana was taught by
one of the most famous and inf luential
woodcarvers in Bali, the late Ida Bagus
Tilem. As such, he was well known in the
profession and was the ideal person to
introduce me to Balinese carving. Mudana
had exhibited his work internationally,
most recently in Germany, and has Ida Mudana in his gallery – note the flowing carving using the natural shape of the wood

WOODCARVING 184 71
Woodcarver at the Ida Bagus Tilem gallery

Ida Bagus Tilem

Inspired by Mudana, our next stop was
the gallery and home of the late Ida Bagus
Tilem, arguably Bali’s most famous and
inf luential carver of the last century. It
was Tilem who developed the abstract style
of elongating figures’ limbs and using the
knots and imperfections in the wood to
guide his designs, resulting in a powerful
and expressive style. The defining legacy
of Tilem was his determination to train
other carvers, and it is thanks to this and
his dedicated students such as Mudana that
this unique style of carving remains to this
day. The gallery still produces traditional
artwork, with carvers dotted around
the compound quietly working away.

Tools and techniques

The carving chisels I came across in Bali had
no wooden handles and were strips of f lat
steel shaped into the usual range of gouges
and profiles we know in the UK. This meant
the hammers I saw were often heavily
beaten up by the steel end of the chisel.
Although still made of hardwood, their
hammers seemed a lot more disposable
than those we know. Another tool used
for detail was a double-sided hook knife Traditional farming scene found within the Ida Bagus Tilem gallery
with a long handle, used to add finish to
faces. As mentioned above, the traditional carving inf luenced by Hinduism in Bali. the wood’s natural form to inf luence the
technique involves sitting on the f loor Hearing of a particularly special village design. Never have I seen such creative
and clamping the wood with your feet – in the hills outside of Ubud, which solely carvings with such long elongated forms.
something that takes some getting used to. carved the iconic and mythical creature
called a Garuda, half-man, half-bird found
Garuda village throughout Hinduism and Buddhism and Next time William f lies to Singapore,
After two weeks of exploring the island, said to be the mount of lord Vishnu. Cycling from where he cycles up the east
and meeting the carvers of Mas village two hours out of Ubud, past terraced coast of Malaysia in search of one of
I was keen to explore the more religious rice fields and farmsteads, I arrived at Malaysia’s most famous woodcarvers.
the small village of Pakudui. Sheltering
from an unexpected rainstorm, I met a
young carver called Jemo, carving away
in an open studio resembling a single
car garage. He was putting the finishing
touches to a Garuda, around 4ft high,
masterfully adding the final details. He
explained carving was in his family going
back generations, having been taught by
his father. No official training is given, but
more a family apprenticeship is common.
Ref lecting back I realise that woodcarving
in Bali was unique in many senses, such
as the remarkable concentration of carvers
Chisels and hook knives in Mas village and the emphasis on using Jemo carving a Garuda

72 WOODCARVING 184
 schoolofwoodcarving.com

Grabovetskiy
School of Wood Carving online

WOODCARVING WOODCARVING TUITION IN CORNWALL

SPECIALIST TUITION
MAGAZINE BINDERS IN ALL ASPECTS OF CARVING BY
EXPERIENCED QUALIFIED TEACHER.
BEGINNERS/RETIRED STUDENTS
ESPECIALLY WELCOME.
Keep your magazine COMFORTABLE ACCOMMODATION NEARBY.

collection in order Zoë Gertner,

with this stylish and Mulfra Cottage and Studio, Mulfra,
New Mill, Penzance. TR208XP
durable binder Tel: 01736-438547
www.zoegertner.co.uk
Holds two years’
worth of issues
For skill, integrity and expertise...
...choose a member of
The Guild of Master Craftsmen
Recognising craftsmanship in a modern world

£8.99
(PLUS P+P)
GO
TO www.findacraftsman.com
pfeil

For your passion

Woodcarving tools
made in Switzerland
Visit www.gmcsubscriptions.com More than 600 high quality products
or call +44 (0) 1273 488005 www.pfeiltools.com
Check and double check
Kevin Alviti displays his error as a cautionary tale

PHOTOGRAPHY BY KEVIN ALVITI

re you sitting comfortably? spirits to get rid of any residue and cleaning I’ve always been told that a person

A You are? Good, as I have a little

cautionary tale to tell you… In
fact, you might have already spotted a
mistake I made in the above carving. But
out any of the letters that needed it.
I then applied two coats of Scandinavian
oil, which brought out the wood’s warmth.
As I was quite proud of this piece, I
who’s never made any mistakes is a
person who’s never made anything!
After 20 years of working with wood I’m sure
I have a fair collection of them. I’ve learnt that
sometimes making a mistake once isn’t went immediately to show a friend. She I’ll probably never stop making mistakes – the
enough. I like to be consistent in life, looked at it and then straight at me. In only time to really worry is if you keep making
that’s why I made this mistake twice. her strong Australian accent she said as the same mistake over and over again.
What’s worse is I didn’t realise this kindly as she could: ‘It looks great and all, A lesson from my carpentry apprenticeship
mistake myself. I printed out the phrase but you know you’ve made a mistake?’ was always: if you can’t hide it then make
I wanted to write, a Rudyard Kipling quote, ‘No, I haven’t! Don’t do that to me!’ I chuckled. a feature of it. I could see no way back
and spent ages getting the spacing right ‘Yeah, here – you’ve spelt strength wrong.’ for this carving, short of planing it down
and picking a font that carves well. I looked at it and the blood drained to start again. So instead, I decided that
I glued it to a beautiful piece of oak that from my face. I still couldn’t see it, I had it would make a good reminder to go on
I had lovingly planed flat. I sorted out a to Google the word just to make sure. the workshop wall. A reminder to always
way to hold it and wedged it tight. ‘Poop,’ I replied flatly, or maybe it was a check and double check my work.
I then started to carve the words out, stronger word, I can’t quiet remember. I decided to carve a squiggly line under
going across the piece methodically, carving I guess this is the risk of a dyslexic carpenter the incorrect words and painted them
all the large uprights first, then going back carving out words. But as someone who red, imitating the spell checker that a
and doing all the serifs then all the curves. loves to write I often think I’ve come up word processor normally does
I did it over a few days, in between other with coping mechanisms to deal with automatically. Unless, I now learn,
jobs so I wouldn’t get bored. I had it sat at any problems I regularly encounter. YOU’RE WRITING IN BLOCK CAPITALS…
the edge of my workbench, so if I This time I’d missed out a critical step – Hopefully my mistake will make a few
found myself with five minutes I could getting my wife to check my work. people smile as they come into the
just carve a few more letters out. I still can’t believe that I worked on workshop and it’s a good lesson
When it was finished, I painstakingly something for three to four hours and that mistakes are a part of life and
removed the rest of the paper, using white didn’t notice the mistake. But then carving. To err is human after all. w

74 WOODCARVING 184
 CHECK, AND DOUBLE CHECK TECHNICAL

Motivational text attached Firmly wedged in place

Carving the uprights Starting to carve the curves Ready to remove the paper

Before applying the oil Spell check required!

‘Finished’ piece A cautionary reminder

WOODCARVING 184 75
Moveable mouse
Peter Keene has some fun with an inquisitive rodent

PHOTOGRAPHS BY PETER KEENE

’ve been trying to come up with an idea for a mouse carving that problem was how to get a life-size carved mouse to do this. The

I can be moved into different positions and activities. I have carved

mice in various poses on clocks, on cheeseboards and even running
across the pages of books. But all of these were fixed (carved on to the
stationary item), and I wanted to carve a realistic, but not anatomically
main requirements are for balance and holding on to various items.
This project is based on a design that I’ve used before. The mouse
is made from a piece of beech that is 90mm long, 55mm high and
38mm wide. I started with a blank that was big enough for two mice,
correct, mouse ornament that could flit from place to place. The one possibly sacrificial.

76 WOODCARVING 184
 MOVEABLE MOUSE PROJECT

Things you will need

Tools: Materials:
• PPE and RPE • Block of beech 31/2in x 21/4in x 11/2in
• Fret saw • Abranet 120, 240 & 400 grit
• Flexicut cut chisels No.6, 1/4in, No.8, 1/4in • Dark oak Briwax and toothbrush for wax application
• Palm chisels No.7, 3/16in-5/16in and 1/2in fishtails
• Rotary burrs 1/8in shaft, 1/8in dia and 3/16in
dia. ball, 1/8in cone for the fur effect

13⁄8in

2¼in

7⁄8in

3¼in

1¾in

Roughing out
1 The first step is to
cut the beech into
two pieces, each
approximately the
right size for carving
one mouse.

2 The mouse is then

1 2 roughly cut into shape. →
WOODCARVING 184 77
Starting the carving
3 To begin the actual carving, I shape the tail
first to make sure I don’t get carried away and
forget to leave enough wood for it, so I have to
slice 6mm off one side, leaving the tail behind.

4 Now I have the tail in place it’s time to start

putting more detail into the mouse. I shape
the ears and round the back using a set of palm
chisels, the main one being a 1/2in fishtail.

5 I then draw the final details on the

wood for the feet, head and legs…

6 …the feet being the important bit.

7 With the feet separated and cut to 3 4

shape, I now need to work on the head.

8 I start by marking out the nose and eyes.

For the nose I mark the centre of the front of
the face then mark 1.5mm either side of the
centre using a small V-tool. I cut a 3mm-long
V either side of the centre then shave off
the outside V cut, leaving the nose proud. I
mark from the centre of each ear to the outer
edge of the nose, then draw a line between
the eyes halfway between ears and nose.

9 For the eye, I use a 5mm half-round

gouge pushed in 1mm deep and carve
round the outside of the cut, leaving the
eye 1mm proud. I then shape the eyeball
round with a 4mm flat micro chisel
and paint it with acrylic black paint. 5 6

10 When polished, this leaves a

beautiful, shiny, black eyeball. This is
the only paint I use – for all other colour
on all my carvings I use waxes.

11 The really important part of this carving

is the balance. With mouse two, I want him
to sit on a shelf looking down. At first he kept
tipping forwards as he was not very well
balanced, so I had a choice – either take some
weight off the head or try adjusting the legs
with very little to play with. I decided to take
some weight from under the chin and a little
off the front feet, in effect adding length to
his back end – the heaviest part of the mouse
– removing little by little until I was satisfied
he would sit on the shelf safely and not fall 7 8
off. Once I am satisfied with mouse two I
transfer the work to mouse one, taking a little
off the chin and shortening the front feet by
2.3mm. This increases the weight of the back
enough to balance the mouse on the shelf.

9 10 11

78 WOODCARVING 184
 MOVEABLE MOUSE PROJECT

12 The next task is to carve the fur. In the

past, I have used a 1/16in V-tool for this,
but it was very difficult to use on internal
curves and took forever. I found this rotary
burr amazing – it now takes about a tenth
of the time it used to take and the tool
11/2in can easily be used for thick fur or fine.
The problem is, I could now do with a
new one but can’t find one anywhere.

13 I use the rotary burr to carve the fur

across the whole body and head.

14 The cheese is made from a piece of oak

1
/8in diameter 63mm deep so the mouse can hang on
without the tail touching the bottom. It is
12 13 cut into a triangle with the Swiss cheese
holes cut in with a 3/8in round burr. As you
can see in the picture, in the outlined area
two holes are specially cut in to take the
mouse feet. The cheese is then polished
with a clear wax to show off the grain
and the back is polished with dark oak
wax to look like the rind of the cheese.

Finishing
15 The mouse tail is sanded smooth with
800 grit wet & dry paper, as is the nose, then
the mouse is lightly rubbed down with a 400
grit, which gives the fur its sheen. I prefer
wet & dry paper because the grit doesn’t
come off as easily as the grit on sandpaper.
I’ve also started using the mesh abrasive
sheets. The mouse is then polished with
14 15 dark oak wax, giving a nice fur effect, leaving
the nose and tail slightly lighter for effect.
Finally, I try him out for size on various items
around the house and now I’m satisfied
with him – job done and I thoroughly
enjoyed carving this little creature.

16 Some more fun places to show the mouse. w

16

WOODCARVING 184 79
 St Elizabeth’s
Cathedral, Kosice
This month we visit the easternmost Gothic cathedral in Europe

edicated to the city’s patron saint, St Elizabeth’s Cathedral

D in Kosice is the largest church in Slovakia, and the

easternmost example of a Gothic-style cathedral in
Europe. It was built on the site of an earlier church which had
been destroyed by a fire; the main construction began in 1380
and was completed by around 1508. In the later stages of the
building work, the frescoes and sculptures were created by local
master craftsmen Stephan Lapicidus and Štefan Staimecz. The
cathedral’s architectural highlights include the Main Altar of
Saint Elizabeth, the Altar of the Visitation and an impressive
Gothic-style spiral staircase at the entrance to the royal oratory.
St Elizabeth’s was designated a national cultural monument
in 1970, at which point major renovation works began. This
included the reconstruction of the crowns of the gables, gargoyles
and other architectural details, which were recreated based
on the original designs found in the cathedral’s archives.
PHOTOGRAPH COURTESY OF SHUTTERSTOCK

80 WOODCARVING 184
Flexcut Has The Largest Assortment Of Fixed
Blade Carving Knives In The World.
F lexcut knives are precision made for maximum performance. Their high-
carbon steel blades have durable points, hold an edge extremely well
and are easily maintained by simple stropping. Each knife is expertly hand-
sharpened and tested before shipping, so it’s ready to use right out of the
package. Comfortable, curved ash handles allow for long periods of carving
without hand fatigue. A wide range of knives are available individually or in
sets, to handle every task from roughing to fine detail carving.

To find your nearest Flexcut stockist,

visit brimarc.com or call 03332 406967