Woodcarving Phil Rich
Woodcarving Phil Rich
Woodcarving Phil Rich
WOODCARVING
(THE WOODWORKER. SERIES)
WOODCARVING
(THE
WOODWORKER
SERIES)
231
ILLUSTRATWXS
PHILADELPHIA
J.
B.
LIPPINCOTT COMPANY
^3
in
Library
Piiutcd
Grejt Britain
CONTENTS
PAOE
I.
II.
BORDERS
(GOTHIC).
10
19
III.
IV.
V.
27 35
43
VI.
VII.
49
VIII.
IX.
TUBE
(1)
Elizabethan
Oak Chest
63
X.
TURE
(2)
Ornament
for
a Pediment
70
XI.
TURE
(3)
XII.
TURE
(4)
Gothic Tracery
82
XI11.
TURE
(5)
The Carved
Cabriole Leg
88
Contents
PAGE
XIV.
95
NATURAL FORMS: CARVING A BIRD .101 AND FOLIAGE PANEL XVI. NATURAL FORMS: CARVING A FISH 107 PANEL XVII. NATURAL FORMS: CARVING A HARE .114 AND SQUIRREL PANEL XVIII. THE CARVING OF AMORINO HEADS 120 ON BRACKETS XIX. CARVING GROTESQUE HEADS AND 125 MASKS
xv.
. .
.
XX.
XXI.
XXII.
XXIII.
CARVING GROTESQUES
:
THE GRIFFIN
130
136 142
XXIV.
154
.165
171
WOODCARVING TOOLS
SHARPENING TOOLS
.
.177
185
191
XXIX. DESIGNS
201
211
INDEX
FOREWORD
A
is
GLANCE
at
the
contents of this
Volume
is
will
aim
is
'
to be of practical help
*
to the practical
man.
By
practical
not meant
merely the student of woodcarving, but rather the woodworker who wishes to combine art-carving with
constructional work.
A
It
nothing in
it is
is,
itself.
when
that
constructional
furniture.
woodwork
or
of a
useful
article
of
The following chapters have, for the most part, been written by an experienced woodcarver who, for many years, has had the opportunity of training
others in the craft.
as
an end
in itself,
He
decoration.
be the practical man who, in turning to woodcarving, has a definite object in view the object of combining an art craft
He
assumes
with everyday woodwork. The student can produce panels of various forms which may be admired as
such, but
it
is
the carver-cabinetmaker
his
who
builds
and ornaments
In the
own
furniture.
five
Volume
will
be found
chapters dealing
Foreword
specifically with the application of carving to furniture.
In the subsequent chapters, however, the blending of art-handwork and construction is kept in view, and the treatment of natural forms,
figure subjects, has all
aim.
which there are a large number, have been specially drawn to elucidate the text, and with a few exceptions are the work of the author.
illustrations, of
The
Several suggestive designs, not specially referred to The comprehensive in the text, have been added.
Index
will
Brough.
I.
GOTHIC FORMS
HANDBOOK
PRACTICAL has necesa chapter dealing with tools and materials, and as a rule this chapter is placed first. In the present case, however, the writer is taking the liberty to depart from a time-honoured rule. The chapter on tools is included, but it appears later. The truth is that no beginner at woodcarving requires a complete outfit. For what he can at first accomplish only a few well chosen tools are necessary. To bring him at the outset face to face with a formidable list of various chisels, gouges, fluters, veiners, bent background and parting tools is but to bewilder him. These, later on, he can face fearlessly as the uses
sarily
EVERY
stand what
become
familiar to
him
what
will interest
him more
is
a dozen tools.
to woodcarving, no better examples or exercises can be given than those of the work of the Gothic period. Here we find abundant proof of clean and crisp cutting, full of life and activity, combined with a true appreciation of nature. At the same time the limitations of the material and the tools employed are frankly acknowledged. Therefore, if we approach the subject in the spirit of the men of old we cannot but succeed. There is of course no necessity to stay where they have stayed, but we may take advantage of such knowledge as is handed down to us. Their tools were few, and so should it be with a
Gothic forms.
As an introduction
beginner.
It is wonderful what an amazing variety of shapes and forms can be cut with half a dozen carving tools. Fig. 1 represents a block of wood 4J in. square and
IVoodcarving
walnut, oak, or any close-grained This is the surface available. upon which we are going to execute our first lesson. Upon the block of wood trace the outline of the Gothic leaf shown. Assume that the wood is held
freely cutting
f in. thick, of pine,
wood
FIG. 1.
firmly to a table, carving board, or bench, by means of a cramp, Fig. 4. (The cramp shown is better than the ordinary form so often used, which is weak at the angles, and soon gets out of order. In Fig. 5 the imprint of the tools to be used is given. Any further illustration is unnecessary, as all tools by first-class manufacturers are alike in form, the only necessity
Gothic
being that
it
Forms
should be understood whether bent or straight tools are ordered. In this set forms D and E should be bent. A Washita oilstone, a Washita slip,
The oilstone is for and the outside of gouges, the sharpening Washita slip for the inside of gouges, and the Arkansas slip for V tools and veiners. A piece of leather should
and an Arkansas
slip are required.
chisels
FIG. 2.
also be provided for the purpose of stropping. Short lengths of old leather belting make excellent strops for carving tools.
First stage in carving. Assuming now that we have marked out the diagrams and that tools and accessories are ready to hand and in the condition to make good and clean cuts, take the chisel (A, Fig. 5)
IVoodcarving
set in the outline, taking care in forcing down that the blade slants slightly outwards towards the outside of the block. This is to allow of a little wood being left for the purpose of trueing up afterwards. The wood is now cut away in a slanting direction from the outside edge towards the centre. (See section, Fig. 6.) It is preferable to cut this away by means of the flat
and
FIG. 3.
gouge, and also to sink the pattern by means of the deeper gouge instead of setting in with the chisel. This, however, requires more practice and care, the reason being that a chisel is apt to force the wood and cause cracks. Nearly all the oldest and best work is modelled and sunk by means of the gouge alone. Having sunk this diamond-shaped outline to a depth of at least J in., take the gouge (D) and cut
Gothic
Forms
out the inner circular ring, leaving the centre raised. In doing this, work from right to left, or vice versa, according to the grain of the wood. Proceed in the same manner with the outer circle, using the smaller
gouge (E). When finished, form lobes by means of sunk channels or cuts, as in Fig. 1. These should be deep that is, carried down to a depth approaching
^w^v^>^>^
OiL STONE
FIG. 4.
\ in. Now, by means of the gouge, we cut away the wood on the outside edges of the lobes, thereby dividing the main lobes into groups of three or more smaller ones on one main lobe. The general appearance of the wood block should now assume the form
as in Fig. 1.
Second stage.
Take the
flat
gouge or
chisel,
and
IVoodcarving
cut or round off all the rectangular edges of the circular grooves (the surface will take the form of that shown in section Fig 6, G and H), care being taken to do this with as few cuts as possible, and to abstain from giving the rounded edges too smooth an appearance. The marks of the tool and the facets made by them
D
IN.
IN,
Jin.
IN.
IN.
3 18 IX.
B AXD
FIG. 6.
SECTIONS OF CARVING
are one of the charms and characteristics of woodThe general modelling on the ends of the earving. lobes, etc., is then finished by means of the smaller
shallow gouge (C). After the junction of the leaf stalks with the leaf has been carved the example could very well be left without any further work being done upon it. Third stage. If it is wished to carry this leaf exercise still further, leading veins should be cut in.
Gothic
(Fig. 3.)
Forms
This is done by means of the V tool (F), a groove being cut on either side of the intended vein, leaving a raised part in the centre for the surface of the vein which is then slightly rounded. The valleys or grooves caused by the V tool should be rounded or splayed off on to the general surface of the leaf. If, in spite of all care taken, an accident should occur
FIG. 7.
to one or more of the lobes, do not be discouraged, but take advantage of the latitude afforded by examples in nature and cut or model these parts on a lower Should it be desired to remove the surplus plane. wood which surrounds the leaf, this can be done in the usual way with the chisel, but to the carver the
marks left by the flat gouge are more pleasing. When, these leaf forms are used in a design
for
IVoodcarving
and parts of the ground exposed, it is not necessary in this style to rout or clean them out to a
carving,
level surface.
A broken ground, providing it is cleanly cut and not woolly, has an advantage of its own, adds richness to the pattern, and does not have such a laboured appearance. The use of the punch should
iiUk HlWW^hMMil
FIG. 8.
it is in many cases only an excuse, or at least a veil, to hide untidy work. This lesson, being an example of method only, a type of leaf has been chosen (in this case the maple, Fig. 7) which lends itself to variations in form. The upper part can be elongated, and other alterations made if the main characteristics are retained. The finished leaf as described is not a mere exercise,
be avoided, as
Gothic
but
Forms
ways, such as a patera or
panel.
may
be used in
many
some small
leaf
form
may
be adapted
ways, a sketch design for a book rack end is given at Fig. 8. The leaf is the same as that dealt with, and the design suggested might be used for other
purposes.
v
II.-GOTHIC FORMS:
woodcarving,
before
as
BORDERS
other
crafts,
with
that, starting on a fresh piece of work, time spent in thinking out the general scheme and the setting-out is well spent. Beginners are apt to be in too much of a hurry to get on to the finishing stages, but if the earlier parts are rushed the final stage cannot be so successful as would otherwise be the case. At Fig. 9 is shown the design for a carved frame or border, which may be flat in section or moulded as indicated. Fig. 10 indicates how the pattern is set out on the wood, the dotted lines guiding the eye in the sweep of the curves. Fig. 12 shows the
WITH
enlarged detail, and this illustration (with Fig. 13) forms the exercise of which the present chapter
treats.
sake of those in setting out their drawings, the outline illustration, Fig. 10, has It should be borne in mind that been introduced.
illustrations in
Border design (Fig. 9). For the who have had little or no instruction
magazines and books are necessarily small, so that the ability to set out with ease to a larger scale from small illustrations is very important. Always try to work to as large a scale as the article in hand will allow.
The
be drawn by means
of the carbon or transfer paper upon a piece of pine about 12 in. long, 5 in. or 6 in. wide, and J in. thick. This will allow a fair margin of wood at the sides to work against, and also for the cramp to hold on to
1)
consisted of
more or
IG. 9.
GOTHIC BORDF.R.
FLAT
or moulded
SECTION
in
FIG. 10.
METHOD OF
\\
11
IVoodcarving
less
we have longer and more subtle curves. Presuming that the main lines, as in the upper unit, are drawn, take the V tool (F, Fig. 11^ and cut along the curved leading lines, starting with a light and shallow cut. and gradually cutting deeper and more boldly as the outside edges are approached. In the upper part
A
-
B
.
C
\
D
-
^^
| IN.
;
KJ
I IN.
U
;
I IN.
IN.
} IN.
ft IN. | IN.
FIG. 11.
A, Chisel
or cuts which, starting hand, sweep out and finish towards the In the lower half the positions are reversed, right. but the work should be done (if the grain of the wood will allow of it) while the wood is fixed in the same
(Fig. 12)
from the
left
Thus two very useful exercises of wrist are given, one to the right, the other to the left. play The deeper of these cuts should be at least in. deep, and at the finish of this first part the upper part of the block should present the appearance of the upper unit of Fig. 12.
position.
take the gouges, B and C (Fig. 11) and set the curved and rounded lobes shown by dotted Cut away the wood by means of the V tool lines. used a little on its side, or, if found somewhat difficult to use, the chisel (A) will do. It must be understood that this lesson will not be satisfactory unless both units are worked. The carving tools (of whatever pattern) are held with the right hand grasping the handle, the left also holding the tool but lower down
Now
in
12
FIG. 12,
(FIG. 10)
IVoodcarving 5
and partty on the metal, thereby acting as a brake or check upon the cuts. This should always be done, otherwise accidents will occur and perhaps be serious.
There should always be a feeling of resistance of
;
left
hand against the right it is by this means that the cut is graded and stopped. Take the shallow gouges (B and C) again, and, holding them guarded as suggested, cut the surrace of the flat lobes on cither side of the central dotted
line so that
a ridge with slightly concave sides is left. (See section, Fig. 12, lower unit.) This should bring the outside edges of lobes to within about 1-16 in. of what will be the ground. The upper ends of the lobes are set in with the same gouges, according to the contour of the diagram. The rounded lobes are also
tools B and C. All the cutting should be made in as long and clean a sweep as possible, and this should be practised until All the it is accomplished with a fair amount of ease.
surplus background can now be cut away, and the whole gradually cleaned up. The V tool, which is used to do a great deal of the work in the above example, is rather a difficult one to handle and use, and is still more difficult for the beginner to sharpen when blunt or broken. But it is an essential tool, and if beginners learn to guard against slipping, and practise upon a spare piece of wood, they should not take long to master it.
Second border design. Fig. 13 (the detail shown enlarged in Fig. 15) is an exercise of a different
type, although the idea of alternating repeat is the same. A small gouge of \ in., generally called a veiner should be added to our list for this example (G, Fig. 11). Tracing the leading lines on the wood as before, we start this lesson by cutting all round the outline with the Jin. gouge (E, Fig. 11), working out the wood Work carein. as possible. to as near the depth of work up reverse the cut, fully, and if the grain should
14
Gothic
Forms: Borders
FIO. 13.
TIG. 14.
METHOD OF
JVoodcarving
taking care that the tools are sharp and that the left hand is resisting the right as before. Try and the hollows very clean and neat. get Now take the Jin. gouge, or veiner, cut from the lower part of the leaf next to the stalk, and on either side, two grooves which shall leave a raised part
between for veins. (See sections, Fig. 15.) If these two tools are used carefully the work should now have The the appearance of the upper unit of Fig. 15. rounded forms are then finished off by means of the
flat
gouges. section lines showing the contour of the surface should be carefully studied before the final modelling is done, and advantage should be taken of these sectional lines to learn to read light and shade for carving purposes. Attention may also be called to the placing of the lines. They are placed at right angles to the main sweep or flow of the pattern. As in the former design the surplus wood can be cut away from the sides, but if the channels are clean it would perhaps look best left as it is. Patterns of this type are suitable for the carved borders of picture frames, and once the unit is understood and mastered it becomes an easy design to repeat.
The
readily be adapted
on
is
many
In
likely to make.
it should be remembered that therefore it is a great absorber of light better to cut on the deep side than otherwise, a good contrast of light and dark being very helpful to a
woodcarving
wood
ornament is that decoration or carving placed upon a moulding should suggest the contour of the moulding, therefore these two patterns and others based on the same principle are
suitable for sections such as those indicated in Figs. 9 and 13.
16
no.
15.
:;>
If))
tVoodcarving
As an alternative, should any difficulty be found tool in executing these exercises by means of the and veiner, their outlines can be set in by means of the different gouges, and the modelling afterwards carried out as already suggested.
CARVED TABLE
18
III.
subject of this third lesson in woodcarving is the Gothic rendering of the trefoil, used with so much power and good taste during the earlyIt is not, of English period of architecture. course, used here with so much strength and vigour as in our churches, because its uses are different. Were we going to execute a carved cap or capital in the round, it would be another matter the relief would be greater and more force and go could be given to it. Anyhow, it is desirable to attempt to obtain some of this feeling in lower relief work ; therefore we are going to ask that the carver should cut a little deeper than the proportions set out in these illustrations if the wood being used will allow of it. The depth in this style should as a rule be at least
THE
| in.
In the illustration, Fig. 16, we have a sprig or spray so arranged that we can look upon it as a unit to be used in a variety of ways as it may please the carver. For examples, note Figs. 19, 20, 21, and 22. It will always be found that, if the unit is carefully studied and as carefully cut, its repetition will be an However complicated many designs easy matter. to be at first sight, on looking into them may appear we find the constant repetition of the unit in slightly varying form. Grasp the motive, and half the diffiThus, make a tracing or drawing of culty is over. this spray, then transfer it in alternate positions, side by side, etc., and you will probably be surprised at the number of patterns and designs that can be obtained from it. See the setting out of leading fines
in these
Woodcarving
Carving the trefoil. To commence the exercise, the tracing having been made, take the parting or
FIG. 16.
V tool (F, Fig. 23) and cut away the ground upon and around the lobes as shown in the working illustration, all the parts should be Fig. 18. See the upper leaf
;
20
Gothic
Forms: The
Trefoil
4'VS
FIG. 17.
OUTLINE
FIG.
i<>
FIG.
18.
SETTING IN OF
FIG. 10
FORM OF
FIG. 19.
TREFOIL.
FIG. 20.
IVoodcarving
treated in this way first. In most woodcarving setting in (or stabbing as it is called) prevents any alteration, even if desirable, owing to the wood being pierced to too great a depth, and so marking the ground. This
is
therefore another good reason why the V tool or gouges are preferable. If we are carving in hard wood, and the setting-in method is adopted, a mallet is This should be fairly heavy, and of the necessary. usual pattern for carvers. But mallets should be used as little as possible they are bad for the tools, and the work as well, if over used.
;
in the form of valleys or grooves all round the leaves, round off the lobes and the raised part in the centre of each lobe
and C
(Fig.
23),
taking
particular care to correctly read the sections marked in the diagram, Fig. 18. These sections are supposed to be cut vertically downwards at right angles to the flow of the leading lines and the lobes. This system is a very useful one, and is known as the rectangular or right angle system, the cutting of section always being at that angle to the flow of line. Care must be taken to keep one side of the lobe or leaf higher than the other, as shown in these sections and in Fig. 16, so as to give a good grip or twist to the stalks and leaves. It is also essential that the cuts should be as long and sweeping as possible, especially in the side cuts of the To get these nice and clean the tools should stalks. Work in a side be well stropped and kept sharp. light, from the left if possible, as the light and shade of your work will then help you. Keep your cutting as in A, Fig. 18, and according to the sections; it will make all the difference between weak and strong work.
take the gouge (D, Fig. 28) and hollow in the sides of the leaf stalks a this will give a better effect in little (see B, Fig. 18) and shade. light
far,
;
When you
22
Gothic
Forms: The
Trefoil
FIG. 21.
Woodcarving
For the sake of practice this spray should not be cut smaller than 4 in. by 6 J in., and it would be a good exercise to place two or more in any chosen position, working them as a simple design. An exact copy or repeat is not at all necessary (or at all likely to be obtained) in woodcarving. What should be aimed at is to emphasise the chief characteristics of the leaf in hand, and not to outrage nature in the treatment.
FIG. 22.
Additional tools. Supposing that you wish to carve a panel based upon this example, and that it will be necessary to clear up and cut away the background, three tools, in addition to those shown in Fig. 23, should be obtained, two of them being bent chisels (one in., the other \ in.) and a macaroni tool The bent chisels are useful and suitable of 3-16 in. for cleaning up the ground. They can be used at a to the bend, and thus a very slight angle, owing
24
Gothic
shallow cut
Forms: The
Trefoil
The can be taken where necessary. macaroni tool is like a bent chisel with vertical sides, something like a small coal shovel or scoop. When well sharpened and in good order it makes a nice
clean rectangular cut at the junction of the carving with the ground. (See Fig. 24.)
A
\ IX.
B
\ IX.
FIG. 23.
C
f IX.
wwV
D
E
F
| IX.
IN.
u
| IX.
;
^ IX.
A, Chisel
G, Veiner.
II
u
IX.
CHISEL
illustrated of the application of unit to fill given forms or shapes are only intended this to give a lead and are not for any particular purpose, but it is hoped that interested readers of this book will endeavour to make patterns by arrangement and alteration, as it is this which makes all the difference
The examples
between mere copying and intelligent work between man and a machine. Should a part of the lobe be cut off by mistake, or due to an accident, cut it again according to what may be left of it. Some parts may almost sink into the ground, and yet the effect may be good only thought must be given to the matter and there should be reason in every cut.
;
25
JVoodcarving
In sharpening and using the gouges do not let them become too pointed, that is, the centre projecting beyond the sides. It is enough to take just a little
sides or corners to unduly do so causes the centre to cut and mark the wood before the sides are engaged at all. Any of the ordinary woods used in carving will do for these exercises, but the best soft
off these
;
wood for beginners is pine. Of hard woods, walnut and oak are suitable, but American oak, unless picked out by an experienced man, should be avoided, as it
is
apt to be fibrous
26
IV.
HOW
dealing with the acanthus leaf in its simpler form, we may leave for the moment all suggestion of Gothic feeling in the carving and attempt only to retain the boldness of cutting. With this form we enter into a rich field of modelling and ornaThe mentation, known as the Renaissance style. of this period was all more or less based upon foliage variations of the acanthus, which, although partly derived from a natural leaf, has been so altered to suit certain conditions that it can be best styled as Some of its different treatments will conventional. be given in the course of these articles. The leaf (Fig. 27) should be cut from a piece of wood 9 in. by 7 in. by 1 J in., in pine for early practice, in oak or walnut if to be made up afterwards. The should as usual be traced on the wood with pattern carbon paper. Then, the wood being held firmly by means of the cramp, or a bench holdfast, the outline of the pipes and eyes (A and B, Fig. 27) set in. It is not much use putting any detail upon the wood at this stage, as it will probably be cut away. Now take the f in. gouge (D, Fig. 28), after the upper part of the lobes have been set in, as at Fig. 25, A, and cut across the grain to the setting in of the pipes and eyes leave concave spaces as shown. A space should first of all be cleared from around the pipes and eyes by means of the V tool, and the in. gouge. Details of how to free these forms (the pipes and eyes) from the wood need not be repeated. Working outwards from the main or central stem, the wood should have the appearance of Fig. 25, with a section similar to that
IN
27
tVoodcarving
shown. After this set in by means of the flat gouges or the parting tool the whole of the containing lines of the pattern (not the smaller lobes), and cut the wood away according to the lie of the grain, making bold
A
FIG. 25.
B
;
ACANTHUS LEAF
FIRST STAGE
clean hollowing cuts with gouges B, C, and (Fig. 28) according to the contour until it has somewhat the appearance of Fig. 25, B.
28
How
to
table spoon (only shallower, see Fig. 29) gives a fair idea of this hollow. It should be noted that, while the spoon shape is symmetrical, the lobes are not, and also that a spoon, as it lies on
^^?2^^^^^^^^^^g^^^^^^
C
FIG. 26.
a surface, is much undercut. In the case of these lobes or main divisions, it is better to have very little (if if done at all, the any) undercutting undercutting
;
29
JVoodcarving
should be left to the last stage. The section in black on the half marked Fig. 25b should be a good guide, but all the stages mentioned should be gone through in their proper order so as to get into a good
line
method.
FIG.
27.
D
ilN.
lN.
K^
f IN.
V
^ IN.
U
| IN.
;
IN.
lN.
FIG. 28.
A, Chisel
and
Gouges
;
F, V-Tool
G, Veiner
the whole of the leaf has been cut so that appears on both sides of the mid rib to have the appearance of Fig. 25, B, take the gouges B and C, and set in the smaller lobes as in Fig. 26, C. It is assumed that the upper part of the leaf has been
it
When
30
How
to
modelled by means of the carving tools so that it has the appearance of Fig. 25, B (see vertical section of the top lobe). The carving should now be examined to see that the general section or side view is as Fig. 26, C, with
and E the lobes slightly raised. Take the gouges and cut out, by means of as long and clean sweeps of the tool as possible, the smaller hollows of the lesser
FIG. 29.
SPOON FORM
FIG. 29A.
SPOON
FORM, CARVED
surface according to the smallness or shallowness of the hollow. Fig. 29 an idea of this stage of the work. (the spoon form) gives These small lobes, in fact, are hollows within a main hollow the ridges that rise between them are important and should be kept as straight and true as It possible along the very subtle curves they form. is better to work from the inside outwards to the border, gradually increasing the depth and width of the hollows until the tool is raised to finish the top of lobe.
;
In the sketch of a stand or holder (Fig. 30) the left face is flower-pot shown with the mid rib nearly straight. At the right
81
IVoodcarving
side
it is
modelled on a curve
either
way would do
according to the wishes of the carver, but both ways must not be used upon the same article as in our sketch, which is given merely to show the two effects. In
IIG. 30.
no carving do long clean sweeps tell with such effect as in the acanthus leaf hollows. They should be shelllike and hold a very valuable grading of light and shade which is the chief value of this stvlc. It is difficult
32
How
to
without a multiplication of drawings to give a true description of the contours, but in that matter the carver must think for himself as he goes along, and also take advantage of the opportunity of examining These, good examples, of which there are many.
FIG. 31.
Eb
FIG. 32.
although often rich and complicated, are in the first place set out on a very simple plan and section. Leaves, etc., of the conventional acanthus type are so largely used in architectural and other work that it is well worth giving the matter very careful study. In the matter of learning to carve properly it is much better for beginners to keep their work on the
33
IVoodcarving
simple side and obtain broad effects than to attempt elaboration in the way of detail. To take this leaf as an example, it would be satisfactory if the carving was left in the state of main lobes only as in Fig. 25, B. This would be suitable for a carved pattern for a window box, a simple vertical treatment of a border, and for many other purposes. If the illustrated flower-pot holder were carried out it should be lined with zinc and have arrangements This to hold the water draining from the plant. would be an easy matter with but a slight knowledge of woodwork. The mitres should be well joined and tongued together, and a good bottom of at least \ in. stuff added. For window boxes separate slabs can be carved and then fastened into a framework. It is of great importance that sufficient care should be taken to keep on the outside of all setting-out lines in this example, as any slight difference in the proportion and symmetry of the lobes would be noticeable. This must always be so in symmetrically arranged objects ; therefore allow in full and have a little wood The eyes of pipes should be to true up afterwards. sunk in to a fair depth, appearing as dark spots.
34
V.
FIG. 83.
FIRST EXERCISE
flatter gouges, B, C, D. (Fig. 28.) The drawing of (or setting out) with the Jin. veiner, G, is a good method, using this tool to mark in all the
up with the
Woodcannng
to the edge of lobes.
gouge of
larger, should be used to make the first hollows on either side of the main stalks or veins. Personally the writer always prefers a deep gouge to a parting tool, as the angle at the base of a deep cutting V-tool is sometimes unpleasant to look at. A deep hollow is never so, and can always be opened out without
FIG. 34.
SECOND EXERCISE
much
Concave surfaces are trouble if necessary. to cut to a required shape compared with fairly easy convex when using gouges, as any slight lowering of the wrist releases the tool by forcing the cut upwards but when gouges are used with their corners downwards, and following the convex surface, it requires care to prevent the ends from digging in. This can
;
36
FIG. 35.
parts should be from J in. to \ in. from the general ground level, and in these examples it would be as well if all the cutting were reduced to as few individual cuts as possible. Thus if, in trying to get a good and clean sweeping cut along the flow of leaf, it is found that the grain picks up against the tool, reverse the cut, but let the cuts if possible be equal in fullness so as to appear as one cut. Although it can be overdone, there is no objection in going over roughed-out
37
Woodcarving
work and reducing the planes or
looking surfaces.
facets into broader
should not be cut lower in on the other side and cut deeper. It will be noticed as the work proceeds that a cut or cuts intended for f in. or \ in.
as
illustrated
relief
Work
It is better to err
FIG. 36.
first sight,
than either when gauged. It is hard to refrain, when a pattern is marked out upon the wood, from setting in the minor division or lobes, but it is a mistake to do so. These should be cut as at A, Fig. 33, in the first instance. This rule should always be followed it is good in method,
;
38
FIG. 87.
When the edges of lobes are under treatment it is as well to bear in mind that it adds variety and charm to the carving if the edges are a little varied that is, splayed or cut at different angles to the ground. This varies the light and shade and also the width of
line.
39
Woodcarving
t
made up with forms, are (generally speaking) best kept higher in the centre and running down towards the ground at their outside edges, as they probably would do in nature.
Corner ornaments such as these, when
floral
Adaptations. In earlier chapters there have been given a few suggestions on applying these units (as we might call them) in different ways to form patterns for various purposes. As it may appear at first sight that this is a question of design, and not carving only,
should be understood that true carving is not the exact rendering of a copy or drawing alone, but a treatment, although limited by the tool used, that should show the individuality and character of the worker. No two workers carve exactly alike, and this is an advantage which gives a personal feeling or
it
The drawings, Figs. 33 and 34, which we have been describing, are parts of a more elaborate piece of work which it is intended to deal with in
character.
another exercise. These corner patterns can be applied to almost any rectangular spacing, and the value of the lesson lies in the cutting which shows the varied modelling. A box top has been shown in Fig. 35 carved in lower relief. The design would also do for decoration of a
small table.
satisfactory form of study would oe to carve each unit according to instructions, and to a fairly large scale ; then, when that is finished in a more or less satisfactory manner, to apply the knowledge gained in cutting, etc., to some actual piece of work.
Both the examples, Figs. 33 and 34, should have the ground cut away to a fairly level surface by means of the bent chisel and macaroni tool. In levelling down this background if the grain allows it cut away from the leaves or lobes towards the outside ;
40
41
42
VI.
A CARVED FRAME
is shown a mirror frame with the corners treated with the unit given in the last This frame should be of a fair size in chapter. order to get the carving bold, and no carving
OPPOSITE
should be commenced until practice has been had in cutting some of the units upon separate pieces of wood. It is not necessary for the carving to be executed upon a flat surface indeed, a better effect (and a useful exercise) will result if the wood is first shaped as in the section shown at Fig. 43. As exercises only, any part of the above pattern that was not treated in the last chapter would be useful. Supposing that the mirror frame has been made up, and that we have transferred the pattern to the surface of the wood, run the J in. gouge or veiner round the outline, or, if preferred, set in. In this latter case care must be taken not to dig down too deep, as some parts flow over the others. It is advisable to start cutting from the base of the leaves out towards what would be their upper ends. This would give the sweeps of the tool a right direction, and would be with the flow of veins and pipes. To make this clearer, take for example the upper and centre part (A), and fix it firmly down upon the bench or carving board with its longest edges parallel with edge of bench. Now, leaving a little over, cut away from the centre part (A) on both sides, forcing the cuts outwards to right and left, and along the direction taken by the veins and pipes of leaves. The edges or facets of the cuts will then follow in the
;
same
direction,
and
lines of direction.
If cut properly they will also radiate to a certain extent, all of which will help to make the
43
Woodcarving
work a successful piece of ornament. It is, of course, understood that we are not always able to do this,
When wood owing to the picking up of the grain. will not cut successfully (say towards the right) the
FIG. 39.
FIG. 40.
cut can be reversed along the same line of direction, but towards the left. If the carver can use both of his hands equally, or his left nearly as well as his right, it is a great
44
A
advantage woodcarving acquirement otherwise be
;
Carved Frame
it
really taking up be added that this may seriously saves a great deal of time which would spent in moving the work. Cuts across
FIG. 41.
SIDE DETAIL
FIG. 42.
(FIRST STAGE)
the flow of line in the direction of line B (see diagram Fig. 39) would have to be faced over or cut out with very shallow or light cuts, otherwise the flow of line would be broken up, and much of the effect would
45
IVoodcarving
be destroyed. This is mentioned here as there will often occur cases where, owing to the grain or other circumstances, it is impossible to cut in the most
satisfactory direction.
In very
difficult grain,
which
FIG. 43.
FIG. 44.
often occurs in odd places, movements simultaneously movement, with a drawing fact, a drawing cut, that combined. This latter is
46
it is
best to
make two
;
a forward or downward or sideway action in of a knife and gouge very useful, especially
A
grain and of leaves.
Fig. 40
Carved Frame
is a drawing representing the general apwhich one-half of the upper part of frame pearance should have after the wood has been modelled into the general or principal masses and lobes. This should be very carefully done, and no lesser detail, such as
the final sub-division, etc., should be cut until the masses have been rendered as carefully as the skill of the carver will allow. Fewer section lines are drawn on these examples, as it should be easier for the student to read the contour now that several examples have
been given in former exercises. Figs. 41 and 42 are renderings of the side leaves
in
two
;
only.
stages, Fig. 41 consisting of the main lobes Sections are shown upon them in one place
the contour otherwise should be read at sight. is also given of the cartouche at the base of frame. (Fig. 44.)
only
section
A
wood
would be a good
There are a good many ways of rendering the After the patterns applied to frames of this type. carving has been done parts of the ground can be cut This was often done during the or fretted away. middle Renaissance period, and some charming results but as it can easily be overdone great were obtained care must be taken not to cut out too much. The
;
more
satisfactory way is to treat the edges or outside only. None of this cutting out should be done until the carving has been completed, as it lessens the resistance of the wood, and parts would be liable to
break away. In treating the leaves of the unsymmetrical acanthus, such as this example, the tools must be well looked
4,1
Woodcarving
to.
will
The pointed and narrow character of the lobes lot of care when the ends are being reached. blunt tool combined with too much force would
need a
DESIGN
bX>&
CAitVED BRACKET
43
VII.-THE DECORATION OF
FIG.
was put together in the usual way with mitred corners, after which it was usual to apply covering pieces to be carved, like Fig. 45.
of suitable form
49
JVoodcarvhig
This method was economical where large pictures or mirrors were to be framed. It was also on these lines that the richly gilded frames of the eighteenth and nineteenth centuries were manufactured, only in many cases gesso or corner transfers were used instead
COMPLETE CORNER (CARVED) OF FIG. 45, FIG. 46. SHOWING SECTION OF FRAME WITH INWARD SLOPE. ALTERNATIVE SECTIONS ARE SHOWN AT a AND 6
of carving. At Figs. 45, 46, and 49, several different sections arc given, but the general principle was the same. One system (a good one) was mostly followed the corner or mitre was covered in its leading part by a radiating or shell-like form, being symmetrical and complete in itself.
;
50
the corners.
The method
is
a large size. the rule for smaller frames. If the moulding has a clay pattern taken from the corner so as to give the
shown is principally for frames of Fewer parts and carving from the solid
fig.
47
FIG,
48
ENLARGED
required shape for the underneath part of the carved corner it should not be a difficult matter to fit these If preferred, the raised part can be corner pieces. removed from the moulding and a rectangular sectional piece of wood can be used to cover the mitre.
51
Woodcarving
These ideas, which are taken from frames now known as antique, give a wide field of usefulness. The number of different designs that can be got out
on
fig. 49a.
ORNAMENT
FIG. 49.- -COMPLETED CORNER, WITH SECTION BEFORE CARVING. THE SECTION SHOWS SLOPE TOWARDS OUTSIDE
EDGE OF FRAME
metrical outline is kept, but it can readily be understood that it is possible, in order to get a richer effect, to cut away this geometrical outline, leaving the outside of the floral and other forms to make a broken
line.
down
of
all
geometrical forms
FIG.
50.
FIG. 51.
WOOD
in
this
IS
EXAMPLE IN WHICH THE MITRE OR APPLIED CARRIED TO THE CENTRE OF TWO OR MORE SIDES OF THE FRAME
lozenge, circular, polygonal, etc. Different stages of the carvings are
53
manner
IVoodcarving
given,
and two kinds of sectional form Fig. 45, where the slope is inwards, and Fig. 49, where it slopes towards the outside.
:
FIG.
5iA.
51,
SHOWING
54
VIII.
OWING
to the revival of Heraldry in recent the carving of coats of arms with the years mantling attached has become very popular. Owing to their conventional rendering in true heraldry, these decorations are particularly
suitable
for
There is also an woodcarving. almost unlimited supply of good designs and historic examples to be seen in our public buildings and churches, many in wood, stone, or metal, others depicted in stained glass windows. A glance at these will at once suggest how suitably they can be rendered with the carving tool. Enough has been done in the former exercises to give some general idea of the treatment of acanthus foliage. Now, as one of the best periods for our purpose was the Early Renaissance, we cannot do better than suggest a coat of arms of that time, in which we shall be able to make use of a flowering treatment of the acanthus leaf much used by craftsmen about
15$0.
This leaf was developed from an earlier form of mantling suggested by the flowing plume or drapery suspended from the helm of knights to distinguish them during battle or in the tourney. Later this was rendered in a label or scroll form (see Fig. 53) but at the period of which we are treating these scrolls had become foliated in a fanciful treatment
;
of leaves.
etc., are carried upon which should, for the sake of boldness, a shield form be 10 in. by 14 in., and about | in. to 1 in. thick.
55
FIG. 52.
FIG. 53.
IVoodcarving
After being lined in, the ground is removed as shown in Figs. 54 and 55. The aim should be to keep the main body of the foliage shallow, or fiat, although those parts shown in relief and folded over should
have a
fair projection, say f in., in their highest parts. section lines on the drawings will give some idea of the general modelling. The shallow gouges should be used to do most of the actual carving, although the little deep hollows at the termination of some of the lobes will need a tool with a quicker curve. At this stage of work bent gouges of various forms would greatly help to overcome those little basin-like hollows that improve this class of leaf. That part of the mantling which passes behind the helmet should be cut in little grooves after the style of engraving lines, and in the same direction and place This as that shown in the illustration. (Fig. 56.) or parting tool, or with be done either with a may a veiner. If carefully done and in the right place it will be found to be very effective, but it should be remembered that these grooves must not be too fine and close together ; a certain amount of radiation shell or flute-like hollow in should be aimed at. as long a sweep as possible would add to the effect of the foliage.
The
shield should be slightly rounded and the or pattern on it kept flat. That is, very little charge or no modelling should be attempted ; simply cut the ground away and clean up to the edges of the wings, body, etc., of the bird.
The
The drawing of the helmets (Figs. 56, 57, and 58) will give some idea of their shape, and it should not be difficult to model them with the Of course if one has a knowledge carving tools.
of
elementary principles of Heraldry it great help, but it is not necessary to go deep into the matter, as the arms of
the
58
is
very
cities,
FIG. 54.
DETAIL OF MANTLING
w^\mmi
FIG. 55.
DETAIL OF MANTLING
of any treatment that best suits us so long as it is historically correct in style. There are many varieties of labels upon which the motto
59
IVoodcarving
is
usually placed.
The
lettering
is
FIG. 56.
DETAIL OF HELMET
(FIG. 52)
FIG. 57.
DETAIL OF HELMET
(FIG. 53)
in
That shown
in the
to the depth of \
FIG. 58
ANOTHER TYPE OF
HEIJtfET
lines
the most complicated looking coats of arms to simple and treatment with a little practice. In taking a final survey we note the different projection ; for example, the centre of the visor of helmet should be one of the parts in highest relief, and the lower part of the helmet (the shoulder piece), as it projects over the shield, should be the highest of all.
61
JVoodcarving
and 57.) The actual relief of the foliage should be read from the drawing. When the wood is obtained of sufficient thickness it is well to let the shield have a double curvature that is, from side to side and from the upper part down towards the base. Sections of the two principal helmets are given, and the serrations of the acanthus are shown at the junction of the same with helmet.
(See Figs. 56 (See Fig. 56, A)The alternative design, Fig. 53, with ribbon mantling, is not so easy as it might look, very careful cutting and study of the subtle curves being necessary if it is to be made a success. Fig. 58 is another type of
HiiBALDIC GRIFFIN
62
IX.
OLD
We cannot, of of envy. a genuine antique that has course, possess but it is not a difficult matter been nicely carved
to a certain
all
oak chests with carved fronts are very in demand, but the supply is limited, and it often happens that we see such an article in the possession of a friend which gives rise
much
amount
FIG. 60.
ELIZABETHAN CHEST
for ourselves, and decorate it with carving executed in a suitable manner, true to historic tradition, so that, when nicely formed, it is far from easy to tell it from the antique. Many genuine antique chests are not really well executed as far as the carving goes, although they
to
make one
63
JVoodcarving
always possess a charm owing to the honesty of their purpose and the bold free cutting. They form welcome pieces of furniture for the hall entrance, lobby or living room. They can be used for a great variety of
purposes, as 1 nen chests to holds rugs or any miscellaneous work that can be put into them in clearing up a room. They can be constructed in almost any size. At one time they were pretty common in the country districts, but by now collectors of the antique have made a fairly clean sweep of them.
FIG. Cl.
would be interesting to describe the principal styles of decoration and pattern, but this would trespass too greatly upon the space that should be We therefore cannot do devoted to instruction. better than take as a period the Elizabethan, in which excellent results were obtained. As the front of such an article as a chest would often come in contact with the person in the rubbing and brushing
It
of clothes in passing, etc., it stands to reason that the relief should be low and the general surface flat. Some Elizabethan work was no more than \ in. in
64
\ in. to J in.
general and useful rule is to have it about high from the ground, which is sunk in
the panel. Most of these Elizabethan patterns show in theii detail a Moresque influence, being composed of interlacing strapwork, the setting out of which has a certain
geometrical basis. (See Figs. 61, 62, and 64.) Although, as just stated, the chest can be to almost any size, the example chosen is about 3 ft. long by 1 ft. 6 in. wide and 2 ft. high. The method of letting
FIG. C2.
SETTING OUT
FIG. 63.
SHADING
in the panels is shown in Fig. 65, the correct antique It is not given here as the style for country chests. or even the best, but it is the usual in only method,
the antique. No nails or screws were used, oak pegs being substituted, as in the best modern work for
church furniture.
carefully setting out the pattern on the geometrical basis shown in Figs. 62 and 64, it is advisable to shade or otherwise mark in all the background that is to be cut out. (See Fig. 63). White chalk will do. Then set this all in with the different
After
C5
IVoodcarving
gouges that will most nearly follow the contour. Do not set in too deep at first about \ in. would be best, as one always cuts down deeper still in
;
cleaning up. A little router (Figs. 68 or 69) is often used for the last cut, as it can be so adjusted to keep an even These tools want careful using otherwise depth. in awkward places the ground will be torn up. The blade should not be (as commonly) like a chisel,
;
_>
y
l
\i/
V
a
7b"
FIG. G4.
OUTLINE ELEVATION
but should have a foot to it, giving a more or less horizontal cut not a scrape, which is the case with
The the older patterns. (See Figs. 70, 71, and 72.) to make and cheap to buy, wooden routers are easy but where much work of this class is done an adjustable metal router is a desirable article. When the ground is all out and the bottom clean, attention is then paid to the interlacing, but not before. The general rule to follow is to pass under and over alternatively. (See Fig. 61.) Parts of the pattern
60
FIO. 65.
SECTIONAL PLAN
FIG. 66.
CARVED TOP
flat
work
mostly (nowadays at least) left until a later stage for although it is less difficult than the deeper work
to learn as far as cutting goes, to be quite sure what one is about. necessary Decision in the cutting can only be obtained by Any little mistake shows practice on bolder work. in a pattern set out on a geometrical basis. directly
to do,
it is less
and there
is
67
Woodcarving
It is unespecially the case with strap work. that strapwork is not more fortunate, however, generally used than it is, as the effects are remarkably good without an undue amount of labour. It does not readily hold the dust ; it is strong ; to a certain
is
This
extent
protected by its even surface, and can be any degree of richness. In fact, the panels would probably look well with half the detail omitted
it is
made
in
according to taste.
FIG. 67.
MOULDED
STILE
AND RAIL
of the lid, Fig. 66, shows how the top can be carved in some simple pattern, preferably based on the unit or units of the larger panel. The actual panel as illustrated is supposed to be about that is, the part showing between the 18J in. square
The plan
also
It is best, in setting out, to make the in this case 12 in. square, so as to allow a pattern slight margin all round to free the pattern. The little carved blocks on the front can be omitted if desired. The hollow should be cut in the stiles and rails as
stiles
and
rails.
us
FIG. 68.
ROUTER
FIG. CD.
ROUTER
FIG.
70
FIG. 71
FIG.
72
OLD STYLE
WITH SOLE
IMPROVED
If it is to be a correct copy of the antique the two ends can also be carved.
CO
X.
design illustrated at Fig. 73 suggests the carved treatment of a pediment panel. The leaf forms shown in Figs. 73 and 74 are those com-
THE
first
monly used around shields, the arms of cities, boroughs, ments are depicted.
is
etc.,
schools,
a very useful one to master, both in It its general composition and also in the carving. to suit any space, and twisted into can be elongated any number of curves and scroll-like forms. It was
This leaf
suggested by flowing drapery in the days of early heraldry, since which time it has taken on the A helmet is sometimes placed leaf-like treatment. above the shield or, instead of that, some other device, such as a mural crown, as in our illustration. The shield here is left plain in order that it may be
;
filled
as required.
The
is
leaf.
If
we
scroll-like leaf
we
The long running as an object for woo.dcarving. cuts and bold clean sweeps we can give the tool make it a delightful object to work upon ; therefore, having massed our leaves in such a manner as to be suitably arranged for the shape of the panel, commence to work it up by first setting in the outline with the Sink different gouges, as in the former exercises. down to about half an inch. The eyes or pipes, Fig. 76, A, are then sunk with A parting tool a small gouge with a quick curve.
70
gouge should next be taken, and those parts of the minor lobes that fall below or appear to pass under the others pared down to the required depth as shown in Fig. 74. Small V-cuts can then be made on either side of the pipes, working from the eyes, A, Fig. 76, and narrowing as the tool works away from them. The surface modelling is then cut in, keeping in mind the general radiation from stem to end of leaf. In those places, C and D, Fig. 74, where the ribbon-like ends turn over, a clean and careful cut is required. The contour appears to flow and must be cut with a gradual twist of the wrist. Of course, this may only be apparent, and several cuts are needed to get the effect yet they should be so blended together as to appear to be one cut. It is this appearance of ease and clean cutting that gives value to work. These suggestions refer to the typical
flat
;
In relation to the composition (Fig. 75) the planes should be kept as simple as possible, without destroying the peculiar character of the leaves. The eyes of
pipes are best sunk fairly deep, so as to appear like black recesses. The general modelling is shown by means of our usual section lines. At the ends of most of the lobes there is a curling-over which gives a very pleasing piece of cutting. One edge is brought up in a fairly sharp line, the hollow at the end suggesting a twist of the wrist in using the tool.
(See also E, Fig. 74.) It is well to sink down to a fair depth around the
Tl
O
'J
6
E
o K
y 3 M
I
d B
IVoodcarving
amount of prominence. This shield can be of any shape required, governed by the style of arms chosen. It is a good plan to
shield, so as to give it a certain
FIG. 77.
(Suitable for
object)
depress the lower part, so as to sink behind the label or ribbon, the upper part appearing to project a little forward. It should also be slightly convex that is, the sides sloping from the centre.
74
Application. The example (Fig. 77) of the application of the carved pediment panel to a War Roll of Honour or similar board for the reception of names is merely an illustration of how and where the panel can be applied. Reduce the detail, and elongate the panel either way. This style of leaf can be made to
almost any space, and can mouldings or carved borders (as A thorough mastery framing. is to be recommended to all who
fit
are taking
up carving
for trade purposes, as it is constantly recurring and commonly in use for public notice boards in important
buildings.
75
XI.-APPLICATION OF CARVING
TO FURNITURE
3.
nearly
useful for sundries which it is necessary to keep out of reach of the small rising generation, and, owing to their elevated position and the protection thus afforded them, they make excellent objects upon which carving can be applied. In a living art craft, which carving should be, it would seem that here we have an opportunity to show our pride of race and love of the country or county in which we live. Fig. 78 gives an idea of how this idea might be expressed. The design contains the National plant emblems of England, Scotland, Ireland and Wales, the idea being that upon the cartouche or shield the arms of any county or city can be carved or incised as required. Those of London are used here because they are simple and effective. To be useful the carved part as illustrated should not be less than 12 in. by 24 in. otherwise the interior will be too limited when the cupboard is made space up. A block plan is given at Fig. 82, showing how many of the old cupboards are arranged so as to allow them to fit into the angle of the wall and yet have a projection in the pendiment and base on either side. (See Figs. 78 and 82, A A.) The background will in this case be like a saucer
;
IN
years ago every home possessed a hanging corner cupboard. Some of these were plain, while others were ornamented with mouldings and carving. These cupboards, when once firmly hung, are very
70
DESIGN FOR DOOR OF CORNER CABINET, WITH THE ROSE, THISTLE, SHAMROCK, AND LEEK EMBLEMS AND SHIELD OF ARMS
FIG. 78.
77
JVoodcarving
c.
p
6 E
78
Woodcarving
the side of panel coinciding with the rim and the centre being fairly deep hollow. The shamrock and the leek are shown in Figs. 80 and 83, the section lines of some parts being given
in
cross
section,
upon them.
There is room for a great deal of individuality in the treatment of a panel of this type, and much depends
upon the use made of the suggestions that occur while The question we should ask ourselves is, cutting. would this or that part look better raised or depressed, bolder, or melting into the ground ? The panel should occasionally be released from the bench and placed in a side light to note the effect, and as a guide for further cutting. The shield should be fairly bold, and
raised
on
its
it
The scroll-like rolls on this prominence. cartouche must be very carefully followed
simpler form could be used in its place. Walnut or satin walnut would be the best wood to use for this panel and it should be carved on a in. or J in. thick so as to allow for suffipiece about cient relief. As the height at which these cupboards are mostly hung protects them, it is admissible to undercut, especially around the shield, but this part of the work should be left until the last.
;
After being transferred, set in, and squared out in general form, attention is paid to the chief characteristics of each part or plant. Take, for instance, the rose at the top. Its section is shown in Fig. 79, B. That is the first cutting. The form, being based on the Tudor rose, the setting out is somewhat geometrical; and as the form is traditional it should be finished off as indicated in the detailed flower. If care is taken to choose gouges which most nearly fit the contour of the petals, a very neat and clean cutting can be obtained, the general idea being to have a double saucer-like treatment with a thickness or lij3 in the
80
more or less conventional in form. In the general scheme of carving this panel, it would be as well to deepen all the background as the central line of panel is approached. This would Those give the cartouche or shield a bolder relief. parts of the background that show between the thistle and the shamrock and the shield can be cut extra deep with good effect.
be,
*U
XII.-APPLICATION OF CARVING
TO FURNITURE
4.
GOTHIC TRACERY
exercise
relates
present
of
to
the execution
tracery, example chosen one of the many ways in which (Fig. 84) gives it can be employed in the decoration of furniture.
Gothic
and
the
In early times some such tracery or open work was introduced into the doors and sides of cupboards, in order to allow the air to enter, thus keeping the food that was mostly placed within them fresh and sweet. They were more or less in use in the monastic refectories. Some such cupboard would be useful at the present day for articles of light food, which may often stand on a sideboard exposed to If our proposed cupboard doors were flies and dust. lined or backed with fine perforated zinc and the tracery executed in oak, we should have a pleasing effect in the contrast between the oak and zinc, especially if the former were fumed. The perforation should be fine enough to keep the smaller flies out, at the same time allowing the free passage of air. (See
THE
The general
when
cut
deep
relief.
^:.vj2v^lV^^^\^j^-!gt^,^^
FIG. 84.
basis
(Fig.
After setting out these patterns on the geometrical shown in Fig. 85, C, the circular holes should be drilled by means of a standard extending bit
95)
JVoodcarvuig
This is, of course, used in a hand brace, unless access can be had to a fairly large drilling machine. The latter makes easier work than in the case of the brace.
are shown in the upper part of these have all been drilled the Fig. centre parts of the ogees should be removed (see this and the ogee shaded part in centre, Fig. 85, D) means of a keyhole ends are opened and removed by saw.
The
drilled
holes
85, C.
When
The carving. We can now commence to mould or cut the cusping. The different lines suggesting the filleted edges and curved splays having been carefully marked in, take a small slip of wood, just large enough to cover the drilled holes, etc., with a little to spare, in the centre of which a screw of convenient size is driven. The head of screw should be true and sharp, and must be at right angles to the surface of
slip.
This screw is regulated up or down according the depth of splay hollow or chamfer reand the sharp edge of the head is worked quired, or rubbed against the sides of the drilled openings, thus giving us a uniform line at the required depth upon the vertical sides of the holes as the panel lies on the bench. (See Fig. 92). A straight gouge of fairly quick curve can now be used to rough out the cuspings, the first cuts of which are shown in the upper part of Fig. 90, F, care being taken to chip well above the marked, line, so that enough wood is left for the proper cleaning up of the curves by means of the curved or spoon gouge, Fig. 88. This gouge should have a fairly stout neck and be about \ in. to f in. across the blade. The stronger tool used by pattern makers is the best for this class of work. In cutting tracery great care must be taken to match the grain and to reverse the cutting direction It is as well to bear in at the least sign of danger.
to
84
FIG. 85.
DETAIL OF TRACERY
ric. 86.
IVoodcarviug
FIGS. 87
TO
95.
mind that
care
away.
little gauge should be made as in Fig. 89, in order to test the depth of the cuts in the spandrels section of these spandrels is shown of the cusps. in. or \ in. hollow, as shown in Fig. 93, in Fig. 94. \
is
The fillet or square edge should be about or T^ in. wide. \ The capping of this cupboard is drilled and cut on the same principle as that of the tracery (see Fig. 86, G and H, which should be sufficient to explain what is required). This capping is kept simple in the example, but it is possible to work it up and put more detail
suitable.
in.
if
an example is given of the cutting when the cusps lie below the general surface of the panel. This is shown on the section. When carefully done this is an improvement, but it requires great care. Although tracery is often executed on a small scale, the work running very fine, it is not advisable to start with any but the bolder type, getting the hand in by degrees. There are many ways in which this typical English class of woodcajving could be used, and why
it is
required. In Fig. 91
so neglected
in domestic furniture
is
hard to
understand.
87
are
in this
and
WE
country there are examples of its gradual It dates back to the time of development. the Egyptians and Assyrians. From that it was carried on by the Greeks and period Romans, but its use was abandoned during the Middle Ages, only to reappear during the time of the Renaissance. Were it not for the above facts its evolution in England could be shown as at Figs. 96 to 99, namely, in the club, the camel foot, the cabriole camel foot, and, finally, the cabriole ball and claw.
Although these legs or supports are often made without any carving whatever, occasions arise in which it is desirable to cut out and carve them in
some particular
means form was often used by the French, hence its name. It has now become common to call all curved and carved leg shapes by that name, whatever form the claws may take.
style ; the leg of a goat. This
cabriole
'
leg really
In our example, Fig. 100, a type is taken that can be developed into any animal or other form desired in regard to the head and foot, e.g. the lion, panther, The wood chosen should be hard, tiger, horse, etc. of a close texture, and straight in grain. Care should be taken to procure it of sufficient thickness to allow
and characteristic modelling, although work can be done on thinner wood by means good of lower relief. The shape of the whole leg should be marked out and the same pattern carefully used
for
suitable
83
Fig. 104.
fair sized
V-tool should
now be used
in
FIG.
96
FIG. 97
FIG. 98
FIG.
99
CLUB FOOT
CAMEL FOOT PLAIN CABRIOLE BALL AND CLAW FOUR TYPES OF CABRIOLE LEGS
preference. to have a
The chest can be gradually cut to appear more or less pointed appearance. The
;
back, although rounded, should be thicker or broader see section lines A, A, A, than the line of the front
Fig. 104.
the general form has been more or less shaped in, attention should be paid to the head,
After
80
JVoodcarving
FIG.
100 SIDE
FIG. 101
FIG. 102
FIG. 103
FIG.
104
VIEW
OUTLINE OF HEAD
FRONT VIEW
HEAD
(front)
ROUGH BLOCK
iH>
Application of
Caning
to
Furniture
and from the very first an attempt should be made As long as enough to set out the form as Fig. 105.
SETTING OUT FORM OF HEAD HEAD TARTLY MODELLED (WITH SECTION LINES)
wood is left on there can be no fear of getting the It should be noticed that noddling too square.
1
PVoodcarving
the head is wedge-shaped in plan, as at Fig. 100.
shown by
inset
After using the V-tool, chisels and flat gouges are the best tools to use. The recess in front of the eye, the hollow of the ear, and the mouth, are the best parts to work on next. After these main features
(see Figs.
OUT
FIG. 108.
TOE MODELLED
(WITH SKETCH
PLAN)
same manner, with the V-tool and then squared out with broad square cuts (see Fig. 108.) The ring-like forms for the body and chest are cut with the V-tool and rounded with a flat gouge ; afterwards the modelling of the head is finished off with gouges which will most nearly fit the contours suggested in the illustrations.
first
02
PTQ. 109.
from the back of the head to the front of the chest should be cut as clean and strong as possible the simpler they are treated the better. (See section, Fig. 106, B.) The muscle forming the eyebrows should be strong and the eyeball sunk a fair distance to give the head a stronger expression. A weak treatment of the eye would spoil the whole. With regard to this example it is merely a type showing how such may be
;
93
Woodcarving
cut out and carved. There are a great many good specimens of all kinds to be seen in our public buildings
and museums. The square treatment, Fig. 101, for first drawing the outline of the head is a useful method. Constant teaching and workshop practice teach one that we are all too prone to round everything over much too soon in our work, and it is as well to combat against this from the first. If the rings were left out and the chest and body only shaped according to the sections, the leg would probably look nearly as well and would be more suitable for some purposes. At Fig. 109 are given a sketch and plan of a circular table with three cabriole legs such as we have described. No size is suggested as this depends on individual requirements. Of course we must always be guided by the usual height of tables or to whatever
such legs may be applied. There should always be a tendency to the bold size, as it is much better to err here than on the small side. The scope of this sort of carving is very wide, and it is useful to obtain proficiency in
it.
94
XIV.
when the impressions made upon of men by the objects around them
of the
WHEN
etc.) were portrayed in carved use was made of symbols or signs intending to depict the character or personality of individuals or nations. This work was mostly of an heraldic nature. Old as it is, dating back to prehistoric ages, it is still made use of at the present day, not only in coats of arms, trade signs, and symbols of
day,
wood,
much
cartoons, the Gallic Cock, the Russian Bear, and the German Eagle. Some countries have several symbols or attributes We ourselves have Britannia, depicting the race. John Bull, the Bulldog, the Lion, and the Rose,
friendly societies, etc., but also in such, for example, as the British
modern
Lion,
Thistle,
and Shamrock.
particular
fit
One
advantage
is
that
such
symbols
will practically
and
periods, the
use of heraldic and symbolic forms being continuous. Now one of the most common and useful spaces to decorate with woodcarving is the spandrel. This is partly formed the depressed or low arch, and by can be made use of in many ways. Spandrels of this kind are seen in overmantels, fireplace casings, sideboards, cupboards, etc. The scale of the present examples obviously depends upon the uses to which the carving is going to be put but, whether small or A careful large, the procedure would be the same.
;
95
Woodcarving
tracing should be made, and after this has been transferred to the wood the outline should be set in with great care, the flat gouges coming in useful. On no account should the edges of the gouges used overlap
riO. 110.
r'
Jl
>
"
-^
FIG. 111.
the line so as to cut into the body of the lion, etc. The modelling being in low relief, it would be difficult to get rid of marks left by false or over cuts. It is well to think out all of this class of work in For example, the highest plane or surface planed.
Conventional Lion
and
Gallic Cock
in the lion spandrel (Fig. 112) is the head or skull \ the hair or mane comes next, and is first set out The as in Fig. 114, in somewhat elliptical form.
general appearance of our first stage or cutting would be that as might obtain from fretting the outline of in. thickness of wood, and then the whole in that the head and mane in layers of adding upon | in. (supposing this to have been done by means of the tools and in the proper way with solid wood). We have then got over the first part. The ground should be fairly flat and cleaned up nicely, so as to bring the figure up sharp against it.
medium sized and a small flat gouge are now used to pare off the square edges of the outline in order to form out the modelling. Unless a fair amount of anatomical knowledge is possessed by the carver it is best to keep the spandrel flat in treatment, making use of very little surface modelling. reference to the section and modelling of the head in the last chapter will give some idea of what this modelling should be. Here, however, it is to be suggested only, and the head is seen in side view. The mane, or hair, is cut in spike-like masses ; the V-tool will come in useful for this, and the lines or cuts of direction should radiate from around the ear. As much as possible should be made of the bristling appearance of the mane of the lion and the ruff of the Gallic cock, so as to make it a symbol of these warlike times.
As
detail
exaggerated to emphasise the fighting the hawk-like talons, claws, etc. qualities Any readers who reside near or in towns of any size can easily note the general modelling of the body of the lion, there is such an extensive use made of it in
nearly all public places for monumental purposes, whilst the lord of the chicken run is a familiar form to all of us. The body of the lion should be kept
97
are
titiTfffSTnm.i
i..,.
J .
i,
., t
ff ffi ilwlillilHn|
IVoodcm ving
and narrow as possible, as in the illustration, being (from an heraldic point of view) correct in this
as long
attitude.
With regard
shown upon
it.
The Red
Cross is that of the British, and the Fleur-de-lis is that of France. In the smaller illustration, Fig. Ill, B and C, giving the setting out of the Gallic cock the body and head shown in the elliptical form should afford some idea of the slightly raised modelling. No section lines have been given, as the first stage
drawings, showing square cutting (Figs. 114 and 115) should give all that is necessary. On the drawing of the lion emblem a few section lines are given on Fig. 112, A showing the V cutting, and giving the modelling of parts of the body. The device on the shields can be either slightly sunk, or it may be raised. To those who can draw and have also a little knowledge of design, it should not be a matter of great difficulty to acquire the power to alter such forms as these to suit the different shaped spandrels that are commonly in use. The question as to the amount of relief required in these spandrels can only be answered by a consideration of the position it is to occupy, and also the thickness of the wood If the spandrel is surrounded by strongly available. raised mouldings or other members so that the carvthe cutting ing would be in a recessed position, should in this case be deeper and the modelling bolder than that set out in the illustration, in order to obtain the necessary definition of the pattern. This is an and attention should be paid to it important point, before commencing to cut.
BBB
100
XV.
I.
NATURAL FORMS
examples illustrated have dealt chiefly with the practice of woodcarving on more or It will thus be a less of a conventional basis. to deal with designs of naturalistic form, change
SO We
conventionalising to a much less degree and that only in the arrangement of the leading lines. will therefore (in this and the two following chapters) take a series of panels of a generally useful size that could be used for fire-screens, sideboard or
cupboard doors, etc., say about 22 in. high by 10 in. wide and from } in. to 1 in. thick, woods such as satin walnut, dark walnut, or close-grained oak, being
suitable.
The examples will go under either of the groups fish, flesh and fowl. This offers a earth, sky and sea wide scope of treatment, and as decoration for home
:
furniture such panels should be singularly appropriate. The panel illustrated is that of two birds representing pheasants. This would do for sky or air owing to their flight, or for a panel representing game or fowl.
The
as
well
previously about sinking the the centre of panel, so as to objects in this case the two have to be taken to get the
;
ground deeper towards throw up the principal birds. Great care will drawing correct as the contour is subtle. It would be best to set in the upper bird first much depends upon how this comes out, it being the principal part. Cut in fairly deep, as some such as the legs and neck will have to fall back parts
lei
Woodcarving
T^W^X^%
Natural Forms
behind the general plane so as to appear to be in the centre of the body. Fig. 117 will give some idea of The parts marked A, the first cutting of this bird. are in three different planes, one below the other, B, C, and should have the first attention. See also at D, where the neck falls in a lower plane.
In cutting away around the body, etc., the slope of the part cut away should not be abrupt, but like Fig. 118, E, E. When this has been done in a satisfactory manner the edges can be rounded off, and the body modelled in the manner shown in the sections, it always being borne in mind that the body and head are oval or egg-shaped in general form. (See The general relief is that of half an egg. Fig. 119). After the moulding has been executed the position of the main wing and tail feathers can be put in. By means of the parting or V-tool the principles of radiation should be taken full advantage of, especially in the wing and at the base of the tail.
The breast and lower part of the body have an imbricated treatment in the feathering, which is shown in the lower part of the neck in Fig. 120. This is obtained by means of a gouge that follows the curves as nearly as possible, the tool being pressed down to a slight depth in the order of arrangement. Afterwards some of the wood is pared from the top or outer edge, backwards, towards the base of the curved cut behind. (See Fig. 120.) There are some feathers about the neck, but below the band (F, Fig. 121) that are represented in a more pointed manner, and with a flatter gouge, but the process here is the same. The neckband F is represented in the living specimen by white feathers, and the contrast is best indicated in woodcarving by a rather plain or smooth surface. In matters of this kind and in relation to all the detail it would, of course, be a great advantage to be able to examine a real bird, as then the spirit
103
'Z6m
V ^'
/
/ .'-,*/
t'
I
J.^
cc
01
JVoodcarving
more easily followed. This work could be made very rich by means of working up the feathers in their right direction by means of small and shallow surface cuts. The head wants careful cutting, but the illustration
of the treatment could be
sort of
at Fig. 121 should give a good lead if the shading is carefully read. The head of the hen bird in the lower part of the panel should be kept in fairly bold relief, with the branches sunk in behind. The treatment of the body of this bird should be kept quieter than the upper one.
The oak foliage. The oak leaves and stem should be carved last of all ; their treatment is shown
in Fig. 122.
Similar blocking out and finishing are carried out over the whole of the foliage. There is room for a lot of feeling and variety in these leaves, and the alteration of planes can be effected as the work goes along. As a general rule it is usual to keep one edge of a leaf raised. The edge of the leaf next to it is kept down. A direct copy of any illustration is not necessary or even desirable. Individual fancy, when combined with
intelligence and knowledge of nature, gives the requisite spirit or feeling. This is everything in successful work. Oak leaves have a tendency to angular growth as regards their setting out in leaf stalks and branches, and this must not be forgotten.
can be cleaned up and with a broken appearleft plain, or it may be rough ance. A woolly effect is avoided by using sharp tools
The background of
this panel
and clean
It
cuts.
has been unnecessary in the last few chapters to say much about tools. New ones of different shape and size should be obtained as the necessity appears to arise, and this can only be felt by a carver himself. Some work with fewer tools than others, but a good
variety
is
is
made.
XVI.
2.
NATURAL FORMS
CARVING A FISH PANEL
exercise in the series of three with which we treating relates to fish and water (Fig. and is more conventional in its arrange123), ment than the panel of pheasants and oak The leaves, with which we have just dealt. reason for this is that the subject lends itself more readily to a pleasing arrangement (see Fig. 127) in the setting out. The panel is supposed to be the same size as before, 22 in. by 10 in. by f in., and should be executed in walnut. When the design has been satisfactorily transferred to the wood, and the interlacing, or passing over and under, of certain parts duly noted, commence cutting
are
now
THIS
by
setting in and working the ground away from around the two principal fish forms in the lower half of the panel. The ground should be removed until it leaves a hollow, as shown in section at Fig. 124. A A. This should be done with both of the chief fish forms, and the cuts should be deep so as to give these two princi-
pal features their necessary prominence. The fish. The first modelling of the fish is shown in section and detail in Fig. 124. section across the head is also given at B B. For a section across the mouth see C C, Fig. 125. The carving of this panel would look well if the cutting away of the ground was deeper in the centre, as mentioned before in relation to similar panels. The saucer-like section should be kept in mind, and sufficient wood left on the hollowed ground to allow of a series of long, bold, sweeping cuts, suggested in the direction of the lines in Fig. 123. This should be
107
IVoodcarving
FIQ. 128.
IN.,
Natural Forms
made a marked feature in the carving of the paneJ a section of what is intended being shown in Fig. 125, D. The hollow cuts fit in well with the flow of the It would, design, and also suggest disturbed water.
:
form an admirable background if carefully If a V or parting tool is run fairly deep on either side of the leaf and flower stalks, these curved and sweeping lines will come out clear and free at the end of the cuts.
in
fact,
executed.
Work
and cut
this
relief as
the ground out well from around the head in the hollow of the mouth deep. By keeping
bold and strong, and slightly diminishing the the tail is approached, a suggestion of pers-
pective
and movement
is
E E.)
For
a section of the eye see Fig. 125, F. The stalks of the leaves and flowers are shown circular in the illustration, but they would probably look well if cut on an octagonal section. It is a matter of choice, but as the leaves are of a rounded form this would cause a The broad ribbing or serrations pleasing contrast. in the fins and tails of the fish should be cut up with a sharp and clean edge so as to get the required character.
be
are of great importance, and should out carefully as regards the imbrication indeed, with as much care as if we were going to execute geometrical chip carving, in which this class of pattern is familiar. There is, however, this difference the scales should become smaller as the tail is approached, as in nature. This, of course, adds to the difficulty in the present example, and it will be necessary to use several gouges of different sizes.
scales
set
;
The
is
given to
explain modelling, which has to be executed on a curved surface. Should it be felt that the correct
rendering of the scales, as illustrated, is too difficult, a good effect can be obtained by just indicating them
109
JVoodcarving
by shallow
of the
fish,
cuts at regular intervals upon the surface or the outline of curve only can be incised. Whichever method is used, care must be taken not
FIG. 124.
to cut too deep or to break up the general contour or form of the body of the fish. This is not an easy panel, but it is one in which there are many possi110
Natural Forms
individual expression and character, there being room for a sense of freedom and enjoyment in the cutting.
bilities for
FIG. 125.
The leaves, etc. Some vertical and rectangular sections are given (Fig. 126) of the upper part of the panel treating of the leaves, flower, and buds. The
ill
71
go
Natural Forms
background
is
shown
flat in this
sketch so as not to
The different values of the confuse the sections. depth, modelling and light and shade could, of course, have been more fully shown, but in woodcarving all these values should be felt as the work proceeds.
For instance, take the water-lily flower in the upper part of panel, where only a sketch is shown, and a simple section. Now, nearly every one has a general idea of the shape of this flower and could make a rough sketch model of it in clay. Thus cut it according to your knowledge in medium relief. A carver should always think of his work in relation
to its section.
If the student is not quite sure of the
fish of the common take the first opportunity of studying one, as type, it lies on the nearest fishmonger's slab, or, better still, from life in the glass globes used for that purpose or in the public parks and gardens. If it is desired to carve this panel on a smaller scale than that of the dimensions given, some of the detail should be omitted, such as the group of small fishes at the upper part and the two smaller side buds.
us
XVII.
3.
NATURAL FORMS
with
,
of an animal larger in scale than the hare would not allow of a treatment that would harmonise with the panels illustrated in the two preceding chapters, we are limited to the size of some such animal. It is, however, quite possible to make a pleasing design within these conditions, and in order to give the appearance of lightness and also to pair with the panel containing birds, a squirrel is introduced. The foliage may be made to resemble the chestnut or some similar leaf at the choice of the carver. In the illustrations only the general containing lines are
IN
drawn.
of design can be note of the setting out of these acquired by taking and kindred panels. The present set is for an upright position, and thus the decorations or filling should appear to have more mass or weight at the lower part. It is necessary to bear this in mind in carving, and to cut out around the hares in such a manner so as to throw them up in fairly bold relief. The hares are represented in what is known as Thus a hollowing-out their form or resting place. around them would be in keeping with their process surroundings, and the saucer-like hollow mentioned in former lessons should be started just inside the tree stem, passing behind the animals, and throwing them in relief with a fair amount of light and shade. As regards the first setting in (or massing out) of the animals there are two methods, either of which
certain
114
amount of knowledge
Natural Forms
CARVED PANEL, 22 IN. BY 10 IN., FIG. 128. REPRESENTING ANIMAL LIFE HARE AND SQUIRREL
115
Woodcarving
would do
flat
executed with care (1) with chisels or to be rounded afterwards (see Fig. 129 [2] gouges, in outline), or (2) with different gouges on the curved
if
:
FIG. 129.
(2)
(1)
J
Fife.
130.
LINE SCHEME OF
PANEL
The latter is perhaps the easier method principle. (see Fig. 129 [1]), but the straight-lined outline allows
of
cutting.
no
Natural Forms
In both cases the first cuts must be well on the outside of the outline to allow for the usual cleaning but the lower up. The ears of the hare are smooth, as the chest, etc., should be part of the outline, such
FIG. 131.
SQUIRREL SET IN
-/?
FIG. 132.
broken up to suggest fur, and it is the successful use of the V-tool on the surface of the body and limbs that makes the animal a success. If cut in with care, the direction of these cuts must be that of the natural way of the fur, and if correct this will help to suggest
117
IVoodcarving
FIG. 133.
HARE WITH
FIG. 134.
EARS LOWERED
FIG. 135.
HARE BLOCKED FIG. 136. HALF-OVAL OUT TREATMENT DETAILS OF HARE AND SQUIRREL
118
Natural Forms
the contour of the limbs. The few lines shown in the drawings should assist the worker, but the success of this exercise depends upon the knowledge by observation acquired by the carver. The cuts representing this fur should not be executed on too fine or small a scale. In the suggestion of lines shown on the squirrel (Fig. 132) there is sufficient for the purpose. In carving the tail of this animal it would be as well to treat it just a little decoratively, letting the V or parting cuts follow the general outline in slight radiaThe ears are also tion and in long sweeping cuts. cut up into feather-like tufts. A good plan would be to treat the fur in tufts or masses somewhat after the shading lines, leaving the other parts practically smooth. The drawings are those of general outline only, so that it is as well to remember this and to break the edges, thus suggesting hair at the finishing off. Hares have longer ears and hind legs than wild rabbits. The position chosen for the two in the panel is that common to hares when If preferable, the ears of the nearer animal alert. can be depressed as in Fig. 133. The erect hare will be the most troublesome to carve, being full faced, there being some difficulty in getting sufficient relief to model it properly. A section is given of both hares which should be of assistance. The illustrations of the blocking out are given as usual ; also the contour is shown on the drawings by means of sectional lines.
134.) fur lies on the body of a tame rabbit would be of assistance to the student, as it is so like a hare in general form. In the modelling of the
(Figs.
[3],
129
132,
and
feet and head, however, remember that the hare is thinner and shows more bone. To those who find it easier, the heads of these animals can be cut first on the half-oval method, treating the body in the same way (see Fig. 136), the details being seen to later.
119
brackets
that
is,
THE
youth by general form in woodcarving than by means of soft outline and expression. In wood it is better to make use of the bold masses that Nature gives us consequently enlarge the upper of the head, and keep the face small as in our part
;
120
to start.
pleasing child's head can always be carved (care being taken) if these few simple rules are followed 1st, that the general shape of the skull is of the most importance ; 2nd, that the face should be kept comparatively small ; 3rd, that the lips should suggest their first use, the age of suckling (see Fig. 137 [5]) ; 4th, that all the features are well rounded and plump. Figs. 137 (6 and 7) are views of a head in high relief, and sketches of several stages in their development are given in Nos. 8, 9, and 10 of the same illustration.
:
in almost any position required look as if they are properly attached providing they to the top of the shoulder.
In No. 11 we have an example of a head in lower relief, the gradual development of which is suggested in Nos. 12 and 13 note again the proportions of the head and the bulging forehead. Mental notes should be taken from Nature as the chance occurs as to the proper treatment and flow of the lines of the hair. The This should be treated as boldly as possible. masses can be cut up in parts with the V-tool general or the smaller gouges. It is impossible, however, to exact instructions on a matter of this kind give each must do his best to suggest all that he thinks most charming in the general proportions and ex;
pression.
A
Do
note of warning is needed as regards other detail. not cut the wings up too much or suggest numer-
al
Woodcarving
also opposite)
122
fig.
187 (continued)
123
IVoodcarving
This makes the work look fussy. The same rale relates to the hair, the most difficult part of all being able to tell when to leave off. In workshops we have found it useful to have a medium sized model of the general masses of a child's head (block model of the skull, etc.) made in plaster. This we have been in the habit of imbedding with a slab of clay it can be pressed in folin the position required lower relief or vice versa. Fig. 137 (11) was worked in this way. For full relief the wood should not be less than 8 in. square. They are often required cut to a smaller scale, but it is not good for beginners to do
ous features.
this.
The general use of the amorino and angel bracket can be seen in the supporting corbels of the timber roofs in our ancient churches, and in the cornice of rood screens, pulpits, etc., of the Tudor periods. They can also be found in many examples of Elizabethan furniture, and the extensive use of the grotesque head of the Renaissance period is well known.
124
XIX.-CARVING GROTESQUE
For example, if it is required to represent amusement or laughter, the expansion of the mouth should be large practically from ear to ear and the eyes
125
IVoodcarving
contracted and narrow. For fright, horror, or suchlike expression, the eyes should be nearly circular, The although they can be sunk under the brows. of anger is indicated by contracted brows. expression But the most satisfactory of grotesque heads are those which, while suggesting their human and animal origin, go beyond it into the fantastic. They are
FIG.
138.
then purely decorative and interesting. It is for this reason that the masks, etc., of the Renaissance period are so satisfactory. The hair, the beard, etc., take on the ears are sometimes out of a leaf-like treatment all proportion and are treated like the wings of the bat ; other features are also exaggerated. During the Elizabethan period of architecture these masks were made much use of, and many fine
;
12u
FIO. 139.
TYPE OF WIDE AND SHORT MASK SIDE AND FRONT VIEWS, WITH SKETCH OF SKULL
;
Afterwards, when obtained, carve to requirements. Such heads fall under two main divisions the long and narrow, and the wide and short. (See Figs. 138 and 139.) In practice they represent consoles of those proportions. In setting about the work, as illustrated, saw (or boldly cut) out the main divisions, as shown in section, this is a block view, but do not Fig. 140 and 141 cut away too close. Always, as we have remarked times before, have enough wood left to give many
would be better
for
good practice.
:
skill is
room
for finishing cuts. bench screw, as Fig. 142, should be added to the list of tools ; this is inserted
127
Woodcarving
into the back of the piece of wood to be carved as shown in Fig. 143. A bench screw is better than an ordinary vice for some work, as it is possible to move the wood to any angle of horizontal radiation, enabling
FIG. 140
FIG. 141
easy cutting on all sides, as well as on the front. Square cutting should be the rule, and this should be
Whatever kept to as far as possible all through. rounded form is necessary should be pared off at the very last. The mouldings (if any) at the top and base
128
wood
wood
In setting out and cutting, leading types should be adhered to, so that a sound method is acquired. In Fig. 139 a Negroid form is taken, as the general
By placing human faces, grotesquely treated, upon the outline of the skull formation of the animal world, suggestions can be
outline of the skull shows.
FIG. 142.
BENCH SCREW
FIG.
143.
SCREW
USED
made
representing
the
different
virtues
and
vices
which these creatures are supposed to symbolise, and it is possible to make one's work extremely interesting when the designs are carefully thought out and
applied.
been said as to cutting, as by a of the preceding chapters sufficient reading Oak or gathered to carry out the tool work. or any other close-grained wood can be used purpose of carving these grotesque heads.
Little has
careful
can be walnut
for the
129
XX.-CARVING GROTESQUES:
THE GRIFFIN
the carving of grotesques one or two forms are in common use, derived as they are from the In early times they had a distinctive antique. symbolic meaning, and although to place the head of a bird with wings upon the body of an animal, created (so to speak) a monster, yet looked at from the symbolic point of view, it was, when the attributes of the creature were understood, a reasonable enough proceeding. Such an object was the Griffin, composed of the head and wings of a bird with the body of a lion. This creation was considered as a symbol of watchfulness, and as such has been used as a crowning member or finial upon the top of the piers that flank It is from such the gateways of public buildings. forms that the later grotesques have descended, great use being made of them in Gothic and early Renaissance times. There has recently been a revival of these objects, They are suitable especially for interior decoration. and interesting subjects to place upon the principal newel post of the main staircase in private houses, and were thus used during the Elizabethan period. Many excellent examples are to be met with in old mansions. The celebrated staircase at Crewe Hall has several of these figures placed upon the newels as supporters
of shields.
IN
In those days the supply of wood was practically unlimited, being obtainable from the oak trees of Therefore the question the local parks and forests. was simplified. It is not difficult of scale and material
180
Carving Grotesques :
The
Griffin
to design an effective Griffin under such circumstances, but as the people of this generation are gradually using up most of the available timber at an alarming rate, it is necessary, both by reason of cost and
FIG. 144.
GRIFFIN
FIG. 145.
ON NEWEL POST
GENERAL SKETCH
economy, to so restrict the design that the least possible timber shall be wasted. Now, as the Griffin or grotesque object which we are treating is not a representation of any living
object, only parts of several creatures being taken,
131
Woodcarving
we
are able to so treat
fairly in section by.
it
that
it
will
be moulded
out of
6 in. or 7 in. say, 16 in. or 18 in. long. square It will readily be seen that limitations are thus imposed which governs the design to a certain degree.
narrow
wood,
say,
FIG. 146.
FIG. 147.
The wings, for instance, must not have a spread of more than what the section will permit. A wider spread and a better effect could be obtained by placing the wings on the diagonal line. The direction of
the head would then be at right angles to this, the
132
Carving Grotesques :
line of direction
The
Griffin
being the other diagonal (see Fig. 151); but this method requires greater skill, as the pattern cannot be transferred direct upon the wood, Thus such work is best left for as in our example. those who have had an art training in modelling. Attention is called to the basis of the idea, as shown in Fig. 148, a, &, and c. If a skeleton of a bird is studied and the detail thus seen reduced to general masses (6), we have a good idea of how to start on our work. The necks of birds and reptiles are long when seen in skeleton. Note, for example, how much like a are when mounted as specimens of anatdragon they
PtO. 148.
OUTLINES
FIG. 149.
PLAN
easy to make a rough clay model of the general masses of our Griffin, and the work would be eminently If any carver who reads these chapters instructive.
omy
in
our museums.
It
would be comparatively
has seen how taxidermists wire and form the heads and bodies of birds and animals, it would give them a good lead. In our illustration of the front view of a Griffin (Fig. 146) the arrangement of the wings is not wholly satisfactory. It would be better for appearance sake to move the upper parts away from the neck ; the reason they are shown close under the head here is
133
Woodcarving
that, unless they are connected to the neck at that spot, the neck (being thin and under cut) is in danger of being broken. When the wings are connected to
the back of the head greater support and strength is afforded. There is no reason why these arrangements should be strictly adhered to the idea, well suggested carried out, is the main thing. In carving, it would be best to transfer a general sketch, as shown in Fig. 145, upon both sides of the wood, and then to cut away with cross cuts by means
;
FIG. 150.
P.rOCK OF HEAT)
FIG. 151.
SKETCH
PLAN*
of a
saw or large chisel those parts marked solid the parts shaded are cut black upon the drawing The instructions that have been afterwards. away given in former chapters should afford an insight into our methods, and with the help of the sketches it should not be very difficult to carve an interesting
;
object.
In a former chapter, dealing with the cabriole leg, we gave some hints on the treatment of the feet and other parts which will be useful for reference.
134
Carving Grotesques :
The
Griffin
The general appearance of our Griffin is seen on a newel post, as shown in Fig. 144. The post can be of any suitable design, and narrower or wider than the object placed upon it, as desired. Illustrations of prehistoric monsters, the remains of whicli
form in alluvial deposits, give us many strange forms which we can make use of, and the fact of their having once existed adds interest as well as mystery to our creations in this
have been found in
fossil
direction.
Any
hard, close-grained
wood would do
for this
object, but it must be tough and strong, as the position of a newel post is exposed and comes in for a few knocks, no matter how great care may be taken.
135
CHAPTER
etc.,
on
the
woodcarving
of
panels,
containing the human figure is necessarily deficient in such instruction that can only be imparted by demonstration or by skill obtained by practice in the workshop and studio. All that can be done in a satisfactory manner is to set out a more or less practical line of thought and method, such as may have struck one in working from the drawings usually supplied to craftsmen. Following this idea we show a figure representing one of the seasons, Autumn, Having settled upon the size and proportion of our panel, say, a vertical one, 20 in. high by 8 in. wide, we take some pose, the leading lines of which tend to fit into our panel in a satisfactory manner. (See Figs. 153 and 159.) Carvers, who have attended art classes, and have drawn either from life or the antique, have a considerable advantage over others, but even those who attend such classes rarely give adequate thought to the sectional values of the models. Unless the study of light and shade and line values affords some knowledge of sectional form, it is of little use to the craftsman therefore it is very good in practice, when a sketch or light-and-shade drawing is made, to put in horizontal and vertical section lines, either on the actual drawing or at the side. The drawing would then be of more practical use and would be valuable for future reference. Composition and flow of line are of such import* ance to a successful woodcarver that, although design and composition hardly come within the scope of
ISO
Figure Carving
these articles, we cannot quite ignore it. Take any outline of a figure that appears to fill a given space in then search out in your mind a pleasing manner for the reasons of the same.
;
op c
-
FIG. 152.
'
CARVED PANEL,
TIG. 153.
GENERAL POSE
AUTUMN
'
OF FIGURE
is
developed from one of the used in Art Schools. (See poses The dotted lines are run in upon, the nude
class
137
JVoodcarving
figure,
of
it.
showing the flow of the drapery and the cause The under figure or body should always be
FIG. 154.
FIGURE AFTER
FIG. 155.
FIRST BLOCKING-OUT
VERTICAL SECTION
studied before drapery is cut, as it prevents mistakes, drapery being entirely governed by the contour of the modelled form. Note the lines of suspension across
138
Figure Carving
cuts,
guide important which should be directed downwards from the points of suspension. As much as possible should be made of these long folds in sweeping cuts. Drapery should be kept simple and the folds few in woodit is better to reduce rather than increase carving the number shown. We will now assume that the design has been
;
the hips
A A,
Fig. 153.
These
will
increased to the required size by means of the wellknown method of squared lines or spaces. When this is transferred to the wood, cut or set in the outline of the figure and the general masses of the accessories.
FIG. 156.
DETAIL OF FEET
When
gouge out the parts depth of about The deeper in., working from the outside inwards. of the cut will then be close to the figure. If part
marked black
out well it will give a good start. One that must not be forgotten is to keep the figure thing full in these first cuttings, as our drapery and detail has to be cut upon what is left. After releasing the wood and working all over the ground, our wood should have somewhat the appearance of that shown in Fig. 154. Section lines are shown in a horizontal direction on all the importhis is cleaned
139
JVoodcarving
tant parts of the body. For a central and vertical section, see Fig. 155. Everything should be cut on the square system at first, leaving plenty of room above for detail. The feet and hands are cut in the
Fig. 156, a,
b,
and
c,
and/.)
and Fig.
157,
;
that will
make a
upper part of Fig. 154. paying particular attention to the section lines. Curves of drapery could be cut in facets with advan-
FIG. 158.
DRAPEltY SECTIONS
FIG. 159.
LINES OF POSE
mark in the points of highest section) with white chalk, otherwise the figure might be cut too flat. It would be best, where possible, to refer to some well-known and nicely modelled figure of similar pose. As this example is in half-relief, the back alone being attached to the ground, the front only need be studied. The accessories, such as the corn, etc.,
tagc.
It is
a good plan to
should be kept subordinate to the figure, and be in as low relief as possible ; the vine at the top need be
140
Figure Cawing
suggested only. As long as the edges near the figure are well treated such parts can be worked up according to individual requirements, this being a lesson on the general setting out of a figure the principal attention
is
lines
a drawing of the drapery with section it, such as they should appear when the drapery is finished off.
is
it.
marked upon
141
XXII.
previous chapter dealt with the method of setting out a full length figure in half-relief, or mezzo-relievo. This method of working has
kept in mind throughout this volume. the very beginning of our work the general scheme and leading lines have been suggested. These, to be successful, must be arranged in a pleasing manner. The grouping is very important, but it can be readily understood that it is easier to take some subject or period that does not lend itself to minute criticism to the same degree as the costume and
been
THE
From
equipment of modern
It is
life.
;
not a healthy sign to run away from difficulties so here we set about a military panel, the idea being that the figures will do for almost any infantry corps. Matters of detail can be altered or added to at the option of the carver, and the arms at the top corner of panel can be adapted to suit any regiment. The composition is shown with the leading lines in Fig. 160. There the general pose and curved lines promise a more pleasing appearance than it is possible to obtain in the treatment of modern uniform. It is as well, however, to remember that the pose is there, although covered up in stiff clothing. It is the use of right or straight lines enclosing the outline of the figures that will give the best guide for starting cuts. The parting or V-tool would be useful to line out with, taking care to keep the form angular at first instead of round. The rounding should be in all cases the very last work to be done. Fig 162 will give a general idea of the first cuttings, shown
142
FIG. 160.
143
Woodcarving
in the square facets. To more readily follow the scheme as shown, work in a strong side light, so that when
HO.
161.
THJC COMPOSITION
So
far as
is
to cut off the face of the panel into rectangular planes, as shown at Fig. 162a, and then trace the detail be*
FIG. 162.
FIRST STAGE
This is longing to each plane upon those surfaces. only the correct method when it is desired to have
145
tVoodcarving
the figures in as
much
relief as
the
wood
will allow,
and when no side wood is to be left. Other detail (except the regimental arms) is simply incised in with the V-tool. When the method of cutting the background is not as in Fig. 162, it is better to base it upon the section of a saucer, as mentioned
in former articles.
It
method mentioned and illustrated in Fig. 162 is a good one when it is desirable to have thin edges for
framing.
It is a mistake to endeavour to get much detail into the hands, etc., of the figures. broad conof such is the safest to attempt. To round ception and other detail to a minute extent usually fingers means disaster, and in most cases, does not add to
the
beauty. Woodcarving, more than any other has limits which should be frankly recognised. craft, It is possible to do wonderful things by means of care
and patience, but beyond certain limits it hardly pays in the long run. As an example, if the detail was cut on work that had reached the stage of Fig. 162 (that is, not much more than incised in), very little more is needed, although this little must be done with great care. In old carving the apparent ease and the simple methods in which the work appears to be done are its chief charms. One or two chisels and the V-tool are all that we
need to get as far as in Fig. 162 the gouges are best to finish up with. Experience teaches that, if the gouges are used for this sort of work from the start, it is almost impossible to get the carving to look For the hands crisp and workmanlike afterwards. own may be used as a gui(Je, working with a your glass. Never lose sight of the fact that you are work;
left
ing in planes.
146
XXIII.
THE
is
it,
difficulties of carving from a shaded drawor a photograph would be greatly reduced ing if some reorganised system of expressing planes could be devised. These planes should be shown the effect of the light coming from one by direction only and, after the working drawing
;
Subtle
and clever drawings that give a pleasing and artistic effect, although successful from an impressionist and art point of view, are misleading to work from.
other words, facets) of different sizes to requirements are the governing principle according of all relief work. There need be little fear but that the carver will round or smooth his work up sufficiently. The principal endeavour should be to keep the carving This in simple planes or facets as long as possible. method gives force and character to the work. In Figs. 163 and 164 are shown two drawings. Fig. 163
(or, in
is from a sketch, Fig. 164 from a In photograph. both cases the facets or planes are purposely exaggerated, and only just sufficient drawing is done to indicate our idea.
Planes
The methods of the artists pen and ink work were more
of view, owing right or straight line. With but an elementary knowledge of anatomy, work could be done from their drawings much more easily than at the present time. It is to be hoped that at some future time a standard of technical drawing for craftsmen will be introduced
147
in the early days of useful from our point to their directness and the use of the
3
C5
c/:
eg
& o M g J
H
<
H
BO
kB
Woodcarving
which, while being artistic, will yet mean something definite in the way of planes and mass of general form. Our schools neglect this principle. Broad
effects are aimed at which (although the right style for producers of pictures) probably are of little or no use to craftsmen, unless they have had more than ordinary training. It has been proved that very many students cannot put a correct section line upon a drawing of their own execution when away
obliterating
FIG. 168.
SECTION LINES.
FIG. 169.
SIDE VIEW
it
)
is
For example, see Fig. 166. Note the direction of wood so that light, and after doing so place your when cut it will show the same light and shade in
the planes. Keep it in that position as much as possible while carving. If this is not practical, put your work from time to time in the required position in order to see how things are going.
150
is
as follows
;
Fig. 165
the skull is shown in Fig. 167. No hair lines are shown on these drawings, it being felt that the carver will without go for them quite enough at the final cutting
FIG. 170.
SECTION
FIG. 171.
us, except that the hollow cuts usually used to represent hair slightly should run in a proper and natural direction. Common sense and a little observation should be a sufficient
guide.
In practice, or for learning purposes, these heads should not be cut in a circle of less than 7 in. or 8 in.
151
JVoodcarving
The idea is not so much to copy as to the principle or method shown to some good apply illustration that it may be the wish of the carver In Fig. 164 we have the light coming to execute. the direction opposite to that of Fig. 163, but it from is drawn on the same principle. The section lines are given in Fig. 168, and a suggested probable side view in Fig. 169 but, as the depth of panels is limited, Fig. 170 is given to show a section over which the idea is worked out. It must be remembered, that it is possible and usual to work in much however, lower relief than this. Much, of course, depends on requirements, and in every case it is a good practice to work as deep as the wood will allow as, owing to the usual or natural colour of the wood, light and shade is more or less absorbed, and what would look well modelled in plaster or marble is, may be, lost in Thus the bolder work is the more woodcarving.
in diameter.
;
pleasing.
Nothing has been said here about the cutting away of the background for, although some of us prefer to cut away from the outside, deepening towards the
a very effective method yet it is not always the best way. Here again other considerations must guide the carver. Fig. 171 is an example of the same head with the light more directly above, it being sometimes useful to think out several views.
head
No more intelligent form of study can be taken than This should be that of practice in fairly dry clay. to a firm surface (say a slate or a piece of applied board), the clay being pressed on in the shape of a slab the same thickness as the wood would be. Cut the clay out as in carving, either with modelling tools or (preferably) carving tools, which must be wiped clean and oiled and dried afterwards to prevent rust. If clay is used as a preliminary study and mass model,
102
possible to
effect of light
renew any part cut out by mistake. The and shade can be gauged, and good
we have
working from light and shade drawings, upon which to assume our own sections. Working from the actual relief model is a different thing, as the
it
carver has
before
him
to observe.
168
much abuse
DURING
FIG.
172.
CARVING
HALF OF PEDIMENT WITH EARLY VICTORIAN (SKETCH OF LEADING LINES IS GIVEN ABOVE.)
In the best examples, such as are seen in sideboards, pediments, overmantels, couch ends, etc., we often come across examples of a vigorous and characteristic treatment of the acanthus leaf see the inside of knoblike terminals used at the end of some of the lobes in our illustrations, Figs. 172, 173, and 174, and also notice the concave hollows that lie beneath them. These give a contrast and variety to the other parts
;
154
which,
when
well
rendered, are
very-
The
and it was also the custom to polish any of the smooth and rounded parts that lent themselves to that process,
and
c).
a proceeding that it is not always possible to defend. There is still a good deal of this furniture in existence,
and
its
serving and in some cases adding to by new work in that style. It is for such a purpose that this chapter
is
written.
155
IVoodcarving
Care should be taken to separate the different styles of working. It would be well to here get the idea impressed into the mind that we are with what is eventually gouge work, the main treating
Characteristics.
being produced by these tools of different conThe sharp edges near the turn-over of lobes are obtained by the juxtaposition of one gouge form to
effect
tour.
FIG. 174.
another
sharp and
the hollows behind the knobs are cut out clear, such a cut as can be put into a piece of cheese. When well done the work has a strong and fleshy look, and gives an impression of the solid English character behind it. That it was used in a wrong manner does not mean that it was wholly wrong, or that we have not made a mistake in going to the other
;
166
ished
the firelight plays upon the varied and polsurface of the remains of our grandfather's furniture, giving charming degrees of light and shade, there are many who will feel sorry that they have, under the influence of fashion, either parted with or
When
FIG. 175.
destroyed
affection.
many
pieces they
The examples used in the illustrations are taken from impressions which these have made upon the
carver. details
The contours are given upon some of the by means of section lines, and it should be
is
this style of cutting and that in which angular or tool cuts are mostly used. or angular cutting is
easier to do, and, although very effective in its way, has a monotonous and cheaper look than the class of
157
IVoodcarving
work
skill
illustrated. Good gouge work requires more and judgment, with a necessity for much cleaner cutting and finishing off. A method of using the side view of a leaf for end pieces is shown in Figs. 174 and 175, the intention being to give a lead as to how this style of work can be used to best advantage. It would be easy with practice to adapt detail of this sort to fill up any shape of panel, or to envelope almost any outline such as
the Victorian sofa or settee back, etc. This class of carving is only suitable for hard woods, such as walnut and the best kind of mahogany there are also some very good woods of excellent colour that have been finding their way from our colonies that may eventually replace the best kinds of mahogany, now getting so scarce and costly. To those who wish to have more practice before carving for use, the details shown in
;
Fig. 173, a, 6, and c, would make good and useful exercises, and the border of Fig. 174 could be used as decoration for a frame.
At
suggested the general outline of a sofa or couch. Upon this is indicated applied carving which should occupy the spaces in a suitable manner. The example chosen is a common one, and should be well known to every one, there being a great number in
existence.
Being usually made, of excellent mahogany, these sofas are rapidly becoming more valuable owing to the growing scarcity of this wood and the consequent increase of prices. Many, unfortunately, have been or sold for a mere song, owing to their destroyed being out of fashion and also to their heavy and solid British character. At a future period, at the turn of
the wheel of fortune, they will probably be much sought after, and there is no reason why they should not be made at the present day. If of good design and
160
and
satisfaction.
is insufficient space here to go into the details as to what principles govern this style. It is enough to note that the Victorian idea was in this case influenced by what is known as the French Empire style, the outline of a sofa being an English rendering of the latter. Most of the articles that we see about are of the horsehair period, but it can be easily realised that there are possibilities as regards effective colour covering to contrast or to harmonise with the rich effect of the polished mahogany. The back. This couch could also be made of walnut with success. The principal item to consider is to keep
There
the cutting bold and somewhat rounded on its outside edges. There should be nothing small and fussy about an article that is in constant use. Detail should not be too much undercut broad and large masses may be, to a more or less extent, as their size protects For example the upper halves of the back can them. be deeply cut, provided care is taken that sufficient attachment is left to hold them securely to the ground. If existing examples are examined it will be noticed that there is a predominance of convex or rounded form on the outlines of the furniture and carving. The general idea of the back should be to give an impression of a vigorous sweep of cutting from the right and left hand corners towards the centre, giving the pattern a line of direction so that the foliage It is appears to flow round the central cartouche. this simple arrangement of sweep that makes many of these backs satisfactory. Unfortunately there arc many examples where the pattern is utterly broken
;
up and disjointed, being in fact an almost grotesque treatment of the Rococo style of detail without its charm. Cartouche. We come now to another and important part of the scheme, the centre. The simple
3
61
as
181.
SHOWING
CARVING
INISHED
END OF SOFA
FIG. 182.
END
FIRST STAGE OF
W///Mmmmf ^ssrf^
it is
CARVING
here that room can be found for individual preference in the way of cartouches or shields carrying simple coats of arms or monograms. (See Fig. 177.) The impression that the whole back should give is that of the principle of sjr mmetry or symmetrical
163
Woodcarving
arrangement. The bottom line of the centre of back should be straight to harmonise with the line of the seat. The wood part of the seat, which should be simple, with few mouldings, if any, can be divided
into surface panels as in Fig. 176. Ends. The most difficult parts to design and also to carve satisfactorily are the carved ends or arms
and 182). They should always have a convex or moulded outline as they are the most liable to come in contact with the person, and it is also better
(Figs. 181
to so arrange the carving so that the foliage should face inwards towards the centre. The carving is thus to a certain extent protected. (See Fig. 181.) The one thing that requires impressing on the mind of the worker with regard to this type of carving is that it should have the appearance of being full and fleshy, and that the turned-over ends of the lobes of the leaves should be a little thick and rounded or knot -like. Any deep cutting to get light and shade should be on the inside, as Fig. 178. It is a matter of choice what is done with the background. It can be left plain with advantage, or, if treated at all, should be on bold lines similar to the example shown. At present the carver is more or less governed by styles. That being the case, the best thing to do is to take lessons from the best examples only, and to steer wide of what are obviously bad features in detail. The general outline of the furniture does not rest with the carver, but with the designer.
161
XXV.
FESTOONS OR SWAGS
catenary curves, known as festoons or swags, are much used in carved work, especially in architectural details, such as friezes, heads of panels and dado borders. They were a very important item in the Renaissance period, based as they are upon the suspension of a cord or other flexible material from two points, the fulness of which cord forms a graceful curve. When they are only slightly decorated that is of a simple chair-like the real festoon arrangement they are catenaries is heavier and fuller in general appearance (Fig. 183). Catenaries were much used in the Adam period, being formed of a series of single blossoms, mostly of a bell-
DECORATED
like
form
(Fig. 188).
Carvers are often called upon to make use of festoons. Much of the work of Grinling Gibbon was of this type. The object to which the carving is to be applied governs the proportions of the festoon. Heavy groupings of floral forms would be rather out of place on very light furniture, but would be suitable for the heavier styles, panels placed over fire hearths, friezes above panelling, and in some cases at the heads of the panels themselves (Fig. 185), these panels being of a more or less architectural character. Fig. 184 would do for a panel placed over a fire hearth, or for a treatment of the frieze. Fig. 183 gives the proportions most used when the festoon is required to be full and the carving strong. The usual way to start cutting is to place containing lines around the outline of the transfer, and then to cut the ground away, leaving the festoon as in Fig. 186. It is then possible to release the wood by wr orking from either side. When the general forms have been
165
JVoodcarving
166
Festoons or Swags
massed out the deeper parts can be sunk in. This can be partly done by boring to the required depth, the carving tools being afterwards used to shape these Work of this type holes into the required outline. looks better if the hollows are sunk to a certain amount of blackness or depth.
Many architectural festoons are of simple form, with deep holes or recesses cut in the under part of
bell-shaped floral forms, as in half of Fig. 190. These were for broad effects, placed high up for work closer to the eye, as most wood carving is, something more
;
interesting should
natural lines. good general effect of rich floral growth is the object of the carver. Roses in any form, either fully or partly open, can always be introduced in English carving. This is our national flower, and has always been the favourite for use in festoons or garlands. Earlier we indicated how to carve a spray of roses for the purposes of panel decoration, and the methods there shown and the manner of cutting apply equally to this article. Festoons are in better keeping when placed above panels, and not directly
in the use of the lighter festoons or catenaries in the Adam style, the daisy chain-like lightness forming a pleasing ornament to the furniture of that period. They also sometimes resemble necklets in treatment (see Fig. 189). There are many examples of festoons to be met with, carved in both wood and stone. The two guiding principles of cutting differ in two particulars only namely, those festoons that are required to look compact, mainly for architectural purposes, and those which are opened out and cut upon a lighter or more sprayClusters of fruit are usually bound or like principle. kept together by means of intertwining ribbons. Such festoons should be classed as the heavy type,
;
167
CO
Ill
ll
'lliiijl.i
< h
.
2 z
oo
o ^
rt
ss
2 s u
'.
eg
o
3
30
r-.
9 * < 03
CO
Jy
1 s
o M
fa
CO
mi
B K
It
3 M E H J 3 B *
N -
* G
o M E
Pa
JVoodcarving
flowers
more
open variety.
Where a
out of a separate piece of wood and applied, as the labour and the waste of wood required in order to get the background down would be too great in solid carving. Sycamore, lime, pear or any hard and close
grained
in
Birch, though very cheap unsuitable except for practice, as it soon becomes worm eaten and useless. Section lines are given on Figs. 186 and 187. The carving tools should be kept very sharp, as broken edges or torn parts are not so easily remedied in the carving of flowers as in the treatment of leaves. A part broken out of the centre of a rose or some such regular flower is a disaster. As festoons, however, arc opened or cut away from either side that is, top and bottom and as the curve is what is known as an open one, the task is easier than may at first appear.
wood
is
suitable.
some
localities, is
170
XXVI.
is
in furniture. CARVING
for building or architectural purposes usually of a slightly different type from that which we have been treating in these articles. It is governed by different considerations, although the styles may be on the same lines as
many and
widely positions in which architectural are placed, variety in proportions, etc, to carvings suit individual requirements becomes necessary.
different
we may
consider a design
for a pair of carved consoles, or brackets, such as are used to carry a sort of covering or protection over the door lintel of some of the older buildings in this
country. This method of forming a slight protection from the weather has been revived of late years in smaller houses. There are two general types of these consoles those where the console or its curves lie in a more or less horizontal plane like our present example, and those in which the console is arranged
:
in a vertical position. Usually a certain amount of economy has to be observed in carrying out this class of work ; and this is often determined by what the builder or architect is willing to supply in the shape of wood, unless the worker is carrying it out for his own pleasure or benefit. Timber suitable for such purposes is more likely to rise than to fall in price ; therefore, it is as well to practise economy. In this case it would be a saving to make the bracket out of two pieces, as illustrated in Fig. 193. The best wood for the purpose would be oak, but if that was found to be too expensive in such large work,
171
JVoodcarving
FIG.
191.
172
Fig. 192 gives an idea of the outline to be drawn upon the side surfaces before sinking the ground to
strapwork are sunk deeply into the wood so as to appear to join with and to flow into the lower number. See the lower part of upper end marked A in Figs. 192 and 194, which give
this
a general impression of the side view. It is advisable to sink the ground down to about in. in this class of as boldness is necessary to throw up carving work, in outside work. In Fig. 196 is shown the method of proceeding with the leaf forming the under surface. After this leaf is drawn upon the wood, as shown in the plan, Fig. 197, the eyes for the pipes are sunk and the containing forms of the lobes cut out (see B, Fig. The volute-like ends of the console are best 196). treated so as to appear to spread out as they turn over (see C C, Fig. 197).
These drawings are from work actually carried out, and there were devices and monograms cut upon the cartouches in the corners. Here they are left plain,
173
Woodcarving
as such detail depends
case. If desired, the
should a
little
FTG. 192.
PATTERN MARKED
FIG. 193.
ON WOOD
FIG. 194.
CARVED CONSOLE
SIDE VIEW
FIG. 195.
much, in case of fracture only just enough being done to throw up the pattern and give the necessary
;
7
relief.
carving.
Consoles or brackets for doors, shop fronts and many other purposes are in constant demand, and this line of carving is a profitable one for young joiners and carpenters to take up, especially if they study suffiei-
FIG. 196.
XXVII.
WOODCARVING TOOLS
THE
used by woodcarvers are very numerous, and vary considerably in size and shape. There is no complete set or outfit, as the combination of size and curve allows a variety of form which is almost infinite. For a professional carver an assortment of from eighty to one hundred tools is not uncommon, but a good deal of work, especially in some styles, can be accomplished with a tenth part of that number, and the beginner for whom this book is written would be more hindered than helped by a full outfit. The following list, though not including all the varieties obtainable, will give the reader a fair idea of the names and forms of the
tools
tools.
:
TOOLS
V tools.
Chisels.
Fig. 199
carver's chisel, commonly called a firmer, and the corner firmer or skew chisel are illustrated in Fig. 200. These and most other forms of carving tools are made in widths varying from 1-1 6th in. to 1J in. The marks at the left-hand side of the
The
show the shape of the cutting edges on an enlarged scale. Gouges. Fig. 201 shows three shapes of straight gouges, the lower one of the three being termed a nutting tool, and in the smaller sizes (J in. or under)
illustrations
'
'
'
veiner.'
Bent gouges.
gouges,
At
shown
'
curved
'
and all the shapes obtainable in straight are obtainable in the curved form, as also in gouges the other forms illustrated. Fig. 203 shows bent or 4 front bent gouges, while Fig. 204 illustrates the
' '
'
back bent
'
variety.
177
178
IVoodcarving Tools
Bent chisels. commonly known
Fig. 205 shows three bent chisels, 4 ' as grounding tool or grounders.'
glance at the illustrations will show that the tools have a cutting edge at one end and a point at the other. This latter is called the tang and is for holding the tool in the handle, into which it is inserted as far as the shoulder, which also can be seen in the illusSome tools for light work are made without trations. shoulders. The handles ,arp from 3J ins. to 5 ins. in length and from f in. to lj in. in diameter, according to the size of the tool, and are cylindrical, hexagonal, or octagonal in section, sometimes tapering at one or both ends. The best form is the hexagonal or octagonal, as they are not so liable to roll all over the place as the round ones, winch have an uncomfortable knack of falling off the bench and thereby damaging their edges. The handles are usually fixed by driving them on to the tang of the tool after first boring a hole in them, but some carvers prefer to set them in guttapercha.
The tools, except those sold in sets, are usually supplied (unless otherwise ordered) without handles and not sharpened, but can always be obtained
handled and sharpened ready for use. Some good sets, containing from six to twenty or thirty tools, can be obtained, but it is better to buy tools singly as reThe shapes vary somewhat with different quired. and the maker's list should be obtained before makes,
purchasing. When the carver is sufficiently advanced, and feels that he or she has gained the necessary degree of proficiency, then it is advisable to add to the set whatever tools are necessary to properly execute the work in hand ; and when intricate designs are being attempted, i it will be found that more grounding tools are necessary than the two indicated at Fig. 24, a smaller
'
179
Woodcarving
FIG. 199.
FIG. 200.
CHISELS,
OR IIRMERS
FIG. 201.
STRAIGHT GOUGES
FIG. 202.
CURVED GOUGES
180
PVoodcarving Tools
3(B
_D
FIG. 203.
C^==anZZD
FIG. 204.
FIG. 205.
D
FIG. 206.
FIG. 207.
IVoodcarving
one, l-16th in. No. 21,
and one
No. 21,
being the most useful. Materials for sharpening tools are mentioned in the next chapter. Other tools. In addition, a mallet, one or two punches, and a pair of cramps will be required. The mallet should be a round carver's mallet, the advantage of these being that they always present a similar face to the tool handle. Punches can be obtained, ready
&
FIG. 208
FIG. 209
MALLET
PUNCHES
but may be made from ; wire nails or other suitable material with a threelarge cornered file. With regard to the cramps, those shown in Fig. 4 are recommended because they are flat and do not interfere with the free work of the hands whilst We would also impress upon workers the carving. necessity of a case, or suitable box, to keep the tools
from injury.
substantial bench or table will be required for working at, and should be of sufficient height to enable
182
JVoodcarving Tools
the carver to work standing. Fasten the work down at the corner of the bench, when practicable you can much better, and so are able then get round the work to execute the curves in the designs with greater
;
precision-
fig. 210.
bench. For instance, a panel can be held by three or four ordinary iron door buttons screwed to the bench, or pieces of wood can be made to answer the same purpose. The best method is to have a stout piece of wood on which to mount the work, either by glueing with paper in between or by screwing and fixing the former to the bench with the bench screw. The screw
183
Woodcarving
passed through a hole in the bench and secured with the nut underneath, as Fig. 210. This arrangement enables the work to be turned round as desired to cope with the variations of the grain and its value cannot be over-estimated. Most of the exercises in the present volume can, however, be held while working with a pair of ordinary iron cramps.
is
184
XXVIII.-SHARPENING TOOLS
best work clean and sharp in outline, and can only be produced crisp in surface treatment by the proper combination of ability with sharp Tools as they come from the makers are, tools. as a rule, not ground, so the edges must first be
THE ground
straight across, when they will be found to be very thick ; they must then be ground down now to a fine edge, quite evenly, so that neither the corners nor the centre dip. Each tool, it will be noticed, has a face side that is, the one which is polished, the back generally being left dull ; and, in grinding, both sides where practicable may be laid on the grindstone. More steel is ground off the back than the face
of the tool.
side
Grinding. Grind a portion of the steel off each of the tool until the edge is barely visible ; let this edge be very thin indeed, but do not let the two ground surfaces quite meet. The length of the ground surface should be about f in. on the back and considerably less on the face, it often being sufficient to rub the face side on the oilstone. If too long a bevel be made, the strength of the tool is reduced.
In grinding straight tools no great difficulty is found, but curved tools require more careful treatment. The best way is to gently rock them from side to side until the edge reaches the degree of thinness required. Always turn the grindstone away from the " tool not towards it and use plenty of water. After grinding, the flat tools should be held upon the stone at an angle just a little greater than that of the ground surface and rubbed backwards and forwards until the two surfaces meet each other, taking especial care
185
IVoodcarving
to preserve the same angle the whole of the way. This will bring the tool to a cutting edge. When putting in bevels on the grindstone the stone
should be turned away from the tool, and the last or cutting bevel should be worked on the oil stone only, the feather edge (or burr) being taken off by means of the leather strop dressed with a little oil and fine
emery powder mixed together. Sharpening. The gouges, of course, can have their outside or back surface worked on the stone. There are two methods of doing this one is to hold the tool at right angles to the stone, and gently rock it from
;
corner to corner the full length of the stone ; the second is to hold it like the flat tools and rock it rapidly from corner to corner, as it is at the same time pushed backwards and forwards. Care must be taken to wear the edge evenly, so that it is still straight across when this process has been gone through. For the inside of the gouge, take the slip whose curved
edge most nearly fits its curve, and, holding it at an angle, rub it backwards and forwards, taking care to rub equally on the corners as on the centre. With the V-tool care must be taken to keep the point sharp and clean. A few detail hints on the sharpening of gouges and V-tools may be of service.
Gouges require more pracsharpen properly than in the case of chisels. The best way is to hold them at right angles to the oil stone, and to put them through a double motion thus, as the tool is worked from right to left and back again along the surface of the stone, the wrists should be moved, rocking the gouges according to their curves so that all the surface of the curve gets an equal pressure and treatment. The bevels of gouges should not be too great, as they are then rendered very thin and brittle. Inside edges are treated with the washita slip, one being chosen that is as near to
tice to
;
*
Sharpening gouges.
1M
187
IVoodcarving
the curve as possible, but not greater. With many mechanics who have taken up wood carving, there is a bad habit of so sharpening their gouges that the centre projects in a point. This habit causes the cuts to be uneven. If it is thought necessary to round the corners off at all, treat slightly. Of course rectangular corners are liable to be broken, but to round them too much is to destroy the known value of the curve. The veiners are sharpened in the same manner as the gouges, but, being so small, special slips to fit should be used for the inside.
Sharpening V tools. The parting, or V tools, most difficult to sharpen in a satisfactory manner. They are, however, so useful in setting in most work, that their good cutting condition is of first importance. They should be laid over on their side and each surface treated like a chisel. They are, in fact, two chisel planes placed so as to form a cutThe two sides should not give much ting angle. trouble, but they must be ground equally and even, or else an undesirable lip or hollow will appear. The angle at the bottom is the most important and yet
are the
rather thick at the point, and it is sometimes necessary to rub them up a little from the bottom. A good tool would not need any of this bottom treatment, but it would have to be carefully sharpened with an Arkansas slip that fits the angle as near as possible.
made
Stropping. Every tool should be finished on the leather, which can be either a proper strop or a piece of old leather. After working on the oilstone we shall often find that along the edge of each tool there is what is called the feather edge and the use of the strop is here called in to take this off. Draw the tool rapidly along the strop several times on one side, then on the other.
:
188
189
IVoodcarving
Then the edge
will be found to have disappeared and the tool is quite ready for use. If properly sharpened the tool will make in the softest wood a cut which leaves a smooth, clean surface, quite free from roughness and scratches.
Materials for sharpening. The materials requisite for grinding and sharpening carving tools
are a grindstone (or access to one) which should be of medium texture ; one quick-cutting (or what is known as a fast carborundum or Washita) oil stone one fine close grained oil stone for finishing ; two or three Washita slips to fit the gouges ; and a set of Arkansas slips for veiners and parting tools. (Fig. 207.) If the above is found to be too costly, one med;
oil stone, one Washita slip for with one large curved surface and one small, gouges, and an Arkansas triangular slip for the parting tools would be sufficient for most purposes. A strop is also required. This is a leather strap into which has been well rubbed a mixture of tallow and emery powder. Its object is to take off the fine
ium carborundum
slip.
190
XXIX.
DESIGNS
TO
;
BECOME an expert woodcarver is essentially a question of time and study. The worker must have good models of a progressive character from which to study, or no progress can be made. To go on repeating the same elementary forms in infinite variety will give facility in handling the tools but, just as a child who never heard speech would remain dumb, so the carver who does not study the works of others will never be able to express freely his own ideas, and according to the quality of his impressions his expression will be good or otherwise. The ability to draw from nature or models is undoubtedly of great assistance to the carver, as carving is but a development of drawing drawing in many planes instead of in one as on paper ; but many who cannot make a passable drawing on paper can yet execute relief work when the design is mechanically
set out.
Drawing. The woodcarver is strongly urged to practise drawing and to make preliminary drawings before attempting any piece of carving, as this enables a clear idea of the design to be obtained and conduces to a better execution. In the case of a poor draughts-
man it is better, after making one's own studies, to start the actual work with a good outline drawn by
;
another hand. The design can, of course, be pasted on to the wood, as is frequently done by fretworkers but this proceeding is by no means to be recommended to carvers, as the paper obscures the grain of the wood, rendering it a matter of experiment as to which way a particular cut should be made, whereas with the pattern clearly traced the proper direction can be be seen at a glance.
191
Woodcarving
Those who are unable to draw freehand, and are aware of the deficiency, may to some extent over-
come the
difficulty
by
learning to
draw mechanically
measure each point on a design with the compasses and copy it bit by bit, never trusting to the eye, but measuring from margin to leaf and leaf to stalk throughout all the pattern. It may be a long process, but it will result in accuracy, and finally, if the method be persevered in, the student will suddenly find that he has acquired a free hand, and no small capacity for designing. Orthodox art teachers may not agree with the foregoing instructions, but they are culled from the experience of one who trained many expert carvers and who insisted that an accurate knowledge of form was the basis of all good design. Selecting designs. All woodcarvers should adopt
' '
of illustrations of
woodcarving taken from magazines and the daily papers, both from the advertisement columns and from the special articles which appear from time to time in such journals. It is surprising what a valuable collection can be got together in this way. The cuttings should be selected from good examples, and carefully
labelled as to their style and period. From this rich storehouse of ideas and designs it is possible to make a judicious selection as occasion may arise.
Carving, as a general rule, should have no independent existence, but should from the first be taken in hand with a definite idea as to its ultimate use and position. To carve a lot of separate panels, etc., for the sake of carving only, is a lesson only half learned. A practical knowledge of construction should come first wherever possible. We must learn to realise that constructional woodwork and cabinet making go hand in hand with carving, and that this is the only sensible way of progression.
103
IVoodcarving
and good design suitable to the article in hand would save much disappointment later. Unfortunthese principles are often disregarded, and we ately, see a design which, though suitable and correct for something else, turns out a failure, just because sufficient thought has not been given to its selection in the first It is unwise to take a design which place. has merely appealed to our fancy, and to use this indiscriminately on any article and in any position.
tical
Our cuttings or sketches should help us here, for seeing what has been done in successful work we note it down, endeavouring to find the reason for success, and thus gaining an insight into the proper application of ornamental form to woodcarving.
As carving is applied to furniture, etc., to enrich the same, it stands to reason that the designs should well fill the space or spaces chosen for carving. It is better to reduce the area to be carved than to spread one's work all over the surface. The thin spread-out carved work, with a great expanse of plain or stamped background, has brought a good deal of trade work into ill repute with the more educated section of the
Therefore, in selecting designs from illustrapublic. tions or cuttings, choose something that is not only otherwise suitable, but which fills the spaces to be All carved, and leaves little background showing.
the necessary plain space can be obtained in the rails, and borders round the works.
to carve,
stiles,
Transferring Designs. Before actually commencing it is necessary that some guiding lines should be placed on the wood. These lines can either be drawn direct or, transferred from a design previously drawn on paper, which is usually the better course, and there are several ways of doing this.
The simplest, cleanest, and most expeditious method of transferring designs from paper to wood is by means of carbon paper, which can be purchased from any
104
195
IVoodcarving
This, as most know, is simply a sheet of coated with a preparation of grease and colour, paper so that when any hard substance is drawn across it a mark is left on whatever happens to be underneath. These tracing papers may be had in black, blue or red. Black is usually preferred chiefly on account of its leaving a stronger mark on the wood. A new sheet of carbon paper is obviously blacker and more greasy than one which has been in use for some time. It consequently gives a stronger impression. For this reason it is advisable to use a new sheet for dark woods, such as American walnut, and a worn On a sheet for white or delicately-coloured woods. dark wood a worn sheet will leave an indistinct line whilst if a new sheet which it is difficult to follow is used for, say, sycamore, it may soil the surface to a degree that will afterwards necessitate laborious
stationer.
;
cleaning.
Fixing the paper. When the design is arranged on the wood it must be seen that the carbon paper is below every part of the diagram that has to be traced. It is idle to suppose that the worker can hold the design he must on the wood while he traces the outline
;
at the corners with pins, tacks, or still regular drawing-pins. If the design should to slip when the work is half done it will happen puzzle the operator to know how to get it exactly in
fasten better
it
down
its
right place again. During the preliminary preparations care must be taken not to rub the hand roughly over the design, as this will leave a mark on the wood
;
such care
is
paper
is
new and
particularly greasy.
necessary when
the carbon
tracing
to trace with. It is usually said that be done with an agate stylo, a sharpTastes always differ, but stick, or a pencil. pointed
What
may
the writer prefers a pencil. An agate stylo has rarely ' a sharp enough point. If a stick is used, a hard'
196
Designs r>
wood penholder sharpened to a fine point is the best weapon any soft wood is useless. The advantage of a pencil is that we all know how to hold and use it. The lead should be hard (say an H or HH) and must
;
If the worker keeps a be kept with a sharp point. small bit of fine glasspaper beside him and periodically rubs the lead point on it he will be able to reproduce a consistently fine outline on the wood.
In tracing the design there can be no doubt that the worker who has had no experience in drawing is at a disadvantage. Still, as it is only a matter of over an existing line with a steady hand, a going little practice should give him the required skill. When the ornamental part of the work is taken in hand it will be found that the glossy mark left by the pencil on the diagram indicates clearly how much of the drawing has been done, and obviates the necessity for continually raising the paper to see how the work
The skilled draughtsman has many progressing. for correcting any little errors in printing opportunities which may have crept into the design. On the other hand, the unskilled encounters endless pitfalls into which he will stumble if he attempts to hurry over
is
his
work.
firm pressure of the pencil is necessary to give a good outline, but any actual indenting of the wood should be avoided. When the work is supposed to be completed, the paper should be gently raised to see that no part has been omitted. In doing this it is wise to keep the two top pins in, so that if any lines have been left out the design may not be
displaced.
Duplicating.
in this
An
carbon paper is coated on an impression is left on the back of the design as well as on the wood. In this way, if a reversed diagram is ever wanted, the design may be laid face
way
is
that, as the
both
sides,
197
Designs
downwards on the wood and the tracing done from
the outline on the back.
Carbon paper
or shape
is
white paper is folded in two, and the carbon paper placed inside, close up to the fold. The design is then arranged above, the centre line exactly corresponding with the fold. When the outline is traced, and the white paper is folded out, an impression of the whole pattern will be found. In the absence of carbon paper the back of the design may be rubbed over with chalk or charcoal, according to the colour of the wood to be used, or a lump of burnt sienna or Venetian red or any dry substance which will leave a deposit on the paper can be used. The pattern is pinned to the wood and marked over as before described, but as the dry pigments will rub off the wood as easily as from the paper, the lines must be gone over again on the wood with a This second marking is not required in the pencil. case of good carbon paper, as the greasy matter on the latter adheres to the wood.
199
200
XXX.
carving
should
always
through
soft
THE more
where possible, be of even and uniform grain, free from knots and strong markings. For beginners a soft wood is advisable, as not only does it require less physical force from hands unaccustomed to the work, but the exercises can be got
speedily.
obtain a good
care and watchfulness throughout, both of the condition of the tools and the method of working, which are of inestimable value. The best yellow pine is a splendid wood in this respect and is comparatively cheap. Satin walnut is, however, a favourite wood for early exercises, as it is somewhat firmer than pine and has a better appearance when finished. It is more liable to twist and warp than most other woods, and is somewhat unsatisSelected factory for work that is to be made up. straight grained mahogany is harder still, but is excellent for the purpose, especially for those who have
damage demands a
had some previous experience in working in wood. Oak and walnut and other hard woods are better left alone until the student has made some progress. The exercises treated in this book have been arranged so that the tools will be brought into use and the difficulties which invariably gradually occur to the beginner have been dealt with one by one, so that they may be more easily mastered.
;
Polishing
Carved
Work.
When
the
worker has
finished his carving the question of polishing it arises. There are quite a number of methods within the ability of anyone who is not an expert polisher.
201
IVoodcarving
if
American walnut has been used, it looks well the plain parts, such as framing, mouldings, and margins, are french polished, and the carved portions left quite dull either covered with just one coat of on w th the brush, or left the natural polish, put colour of the wood, it being understood that carving should not as a rule be highly polished.
If
;
;
Oiling the whole work with raw linseed oil makes a very good finish, and, if followed with vigorous rubbing at regular intervals, a good dull polished surface can be obtained that is pleasing, natural, in good taste, and that shows the grain of the wood to The process simply consists in great advantage. the work, either with a rag, or a camel-hair covering brush, with raw linseed oil, letting it stand for two or three hours, and then wiping oft with a clean rag. This process repeated, say, half-a-dozen times, and followed by the vigorous rubbing referred to, will produce an exceedingly good surface. If it be required of the oil that it shall dry quickly, it is an advantage to put one part turps to two or three parts oil. Another way to finish walnut is to oil, dry, and rub. and then give one coat of brush polish glasspaper with fine paper then rub with the familiar beeswax and turpentine or ronuk.
;
;
Finishing Oak. The same plan can be adopted if the wood be oak, especially if it be required to have it If it be required to have it light in colour. it be waxed without previously very light, may
oiling
it,
which
people
extent.
it
like the
latter slightly darkens it. But many oak to be darkened to a greater or less
The best way to accomplish this is to fumigate by means of liquid ammonia. Different kinds of oak take the fumes in a different manner. Red oak,
for instance, will scarcely take the fumes at all. Wainscot oak from the Baltic ports, or from Odessa, will take the fuming the most evenly.
202
Other Woods.
its
woods, such as sycamore, chestnut, and holly, may be stained according to the taste of the student green, black, brown, etc., then given two coats of polish. An excellent polish for carved work is made by first dissolving shredded beeswax in spirits of turpentine, then mixing the emulsion so made with equal
oil and turpentine. the course now brought to a close, it has been In intended to take the beginner from the commencement of the art of wood-carving to a point when he or she will be able to grapple with the greater difficulties of more advanced work unaided, with more or less success. By always taking advantage of oppor-
quantities of boiled
900
JVooclcarving
tunities,
of inspecting, and, if possible, of taking sketches and particulars of good work, the worker should be able, to some extent, to undertake the execution of fairly difficult pieces of carving. What is most required is practice constant conscientious practice, having regard not to the quantity of work done, but rather to the quality.
CS1GN FOB
THERMOMETER
204
$^i
205
CARVED TABLE
SIDE VIEW
2l>0
207
*-ML-j
31Q
INDEX
Acanthus leaf,
the, 27
Adam
167
Ammonia
fuming, 203
Arms, heraldic, 55
Bookcase, Dutch, with carved pilasters, 209 Book rack end, design for, 8 Bookshelves, design for, 135 Border adaptation cf Gothic
trefoil, 21 Borders, Gothic, 10 Brace and bit for pierced work,
83
Bracket, design for, 48 Brackets (or consoles) for door canopy, 171 Brackets with amorino heads, 120, 122
211
Index
Cramp used
10,
182
Crewe Hall,
on
stair-
Designs, illustrations of contd. Mirror, hand, 195 Overdoor, 176 Panel, fish, 108 Panel, hare and squirrel,
115
Designs, adaptation
of,
Designs, duplicating, 199 Designs, hints on, 191 Designs, illustrations of Bellows, chip-carved, 189
:
Bookshelves, 135 Bracket, 48 Cabinet door, 77 Chest, Elizabethan, 63 Chip-carved clock, 153
Clock, 200 Clock, chip-carved, 153 Cupboard, Gothic, 83
acanthus
leaf, 32,
34
photograph, with 184 Frame, picture, 187 Frame with Gothic ornament, 9 Gothic cupboard, 83 Gothic frame, 9 Griffin, heraldic, 62 Hand mirror, 195 Heads, female, 148 Heraldic griffin, 62 Heraldic shield, 56, 57 Key rack, 26 Mirror frame, 178
leaf,
and pheasant 102 Panel, vine leaf, 193 Panel, with section, 205 Panels, figure, 137, 143 Pediment ornament, 72 Pediments, examples of, 210 Photograph frame with ivy leaf, 184 Picture frames, 42, 187 Pipe rack, 198 Sofa, Early Victorian, 158 Table, carved, 16 Table, circular, with cabriole legs, 93, 94 Table, Louis XV, 94 Table, side and end views, 206, 207 Table top, chip-carved, 205 Thermometer, 204 Timepiece, 200 Timepiece, chip - carved, 158 Turned and carved work, 208 Wall pocket, 75 War Roll of Honour, 74 Window box with acanthus leaf, 33 Designs, transferring, 194 Door canopy, consoles for, 171 Door, carving a cabinet, 76 Drapery, 139, 140 Drawing, advantage of, 191 Drawings, carving heads from shaded, 147 Duplicating designs, 199 Dutch bookca.se with carved pilasters, 209
Panel,
foliage,
212
Index
Elizabethan oak chest, carving an, 63
Elizabethan period referred to, 124, 126, 130 Empire (French) period, influence of, on Early Victorian furniture, 161 Eye, treatment of, 93
Gibbon, Grinling, 165 Gothic borders, 10 Gothic forms, usefulness of, Gothic frame, design for, 9 Gothic leaf, illustrations of,
3,
1,
'
'
Feathers, treatment
Feet, detail of, 139
of,
103
Festoons and swags, 165, 168, 169 Figure carving, 136 Firmers (chisels), types of, 177, 180 Fish panel, carving a, 107 Fish, treatment of, 107 Fleur-de-lis feature, 100 Flower pot stand with acanthus leaf, design for, 32, 34 Flower, the water-lily, 113 Fluters (quick gouges), 177, 180 Foliage, treatment of oak, 106 Frame border, carved, 10 Frame, design for, 141 Frame, design for Gothic, 9 Frame, design for mirror, 178 Frame, design for picture, 187 Frame, mirror or picture, design for, 42 Frame, photograph, with ivy leaf, 184 Frames, decoration of, 49 Freehand drawing, 191 Front bent gouges, 177, 180 Fruit as ornament for festoons, 167 Fur, indicating animal, 117
Furniture, application of carving to, 63, 70, 76, 82, 88 Furniture, Early Victorian, 154
Gothic tracery, carving, 82 Gothic trefoil, the, 19 Gouge, grouping main features of leaf with, 5 Gouge, sinking pattern by means of, 4 Gouge, small, used for circular holes or hollows, 67 Gouge used for cuspings, 84 Gouge used for lobes of leaf, 12, 14, 22 Gouges, curved, 177, 180 Gouges, deep, used for hollows, 36 Gouges, flat, for shallow work, 58 Gouges, front and back bent, 177, 180 Gouges, sharpening, 186 Gouges, types of, 177, 180, 181 Gouges used on acanthus leaf, 27, 28, 30, 31 Griffin, carving the, 130 Griffin, heraldic, 62 Grinding tools, 185 Grindstone, using the, 185 Grotesque heads and masks, 125 Grotesques : the griffin, 130
Hand
for,
195
Hare and squirrel panel, 114 Head, carving conventional animal's, on cabriole leg, 88,
90
Head,
child's,
120
213
Index
Heads, carving, from shaded drawings, 147 Heads, grotesque, 125
Masks, grotesque, 125 Military panel, 142 Mirror, design for hand, 195 Mirror frames, decoration of, 49 Mirror frames, designs for, 42 178
,
Helmet
60, 61
for, 56,
in
clav,
Natural forms
Kauri
Key
Hare and
114 Pheasant
squirrel panel,
and
foliage
Leaf design,
1,3,4
Newel
Leaf, ivy, design, 184 Leaf, the acanthus, 27 Leaf, useful type of, for carving, 70, 72 Leek (Welsh) form in design, 79 Legs, carving cabriole, 89 Lettering, 60
2, 26, 27, 63, 82, 129, 171, 175, 201, 202 Oak chest, carving on Eliza-
Oak,
bethan, 63
treatment foliage, 106 Oak, fuming, 202 Oak, polishing, 202 Oiling carved work, 202 Oilsiips, sections of, 181
Oak
of,
XV
Oilstones and oilsiips, using, 186, 190 Overdoor, design for, 176 Overmantel, part of Early Victorian, 156, 157
Macaroni tool,
24, 25
,
205
Panel,
59
hare
and
quirrel,
Maple
leaf,
Jlustration of, 7
114
214
Index
Panel, pheasant and foliage, carving a, 101 Panel, vine leaf, 193 Panels, figure, 136, 142 Parting (or V) tools, tvpes of,
177, 180 Peartree, 170
Section, importance of, relation to carving, 113 Section of figure, 138 Section of head, 151
Sections, 31, 37,
in
21
a,
151 Setting in with chisel, 3 Shamrock form in design, 78 Sharpening tools, 185
Shield, design for heraldic, 56,
57
Shield form on panel design,
Pediments, examples of carved, 210 Pheasant and foliage panel, carving a, 101 Photograph frame with ivy leaf, 184 Picture and mirror frames, decoration of, 49 Picture frame design, 187
Pilasters,
80
Skull, study of the, 125 Sofa, carving on Early Victorian, 158, 160 Spandrel, a useful space for
on
Dutch
2, 10, 26, 27, 201, 203 Pipe rack, design for, 198 Polishing carved work, 201 Punch, when to avoid use of,
Pine,
carving, 95 Spandrel treatment of British lion, 98, 99 Spandrel treatment of Gallic cock, 98, 99 Squirrel and hare pane,l, 114 Strap work, Elizabethan, see 63, 68 Stropping, 188
Punches, 182
Red Cross feature, 100 Renaissance period, references to, 47, 55, 124, 130, 165 Ronuk, 202
Rose (English) form
in design,
78, 80 Roses as ornament for festoons, 167 Routers for background work, 66, 69
form
in
Satin walnut, 80, 201, 203 Satin walnut, finishing, 203 Scales, fish, 109 Screw, use of bench, 127, 129,
183
Timepiece, design for, 200 Timepiece, design for chipcarved, 153 Tool handles, 179, 181 Tools, carving Chisels, bent (or grounding tools), 179, 181
:
215
Index
TVols, carving (continued) Chisels (or tinners), 177, 180, 181 Fluters (sharp gouges),
:
177, 180 Gouges, curved (front and back bent), 177, 180, 181 Gouges, straight, 177, 180 Macaroni tool, 24, 25
tools (or parting tools), 177, 180 Veiners, 177 Tools, carving (see also under Chisels, Gouges, V Tools, and Veiners) Tools, grinding, 185 Tools, how to hold, 12 Tools, set of seven, 12 Tools, set of six, 6 Tools, set of ten, 25
V tools, types of, 177, 180 Veiner, setting out vith, 35 Veiner used for circular holes or hollows, 67 Veiner, using the, 16 Veiners, sharpening, 188 Victorian furniture, carving on Early, 154 Vine leaf design, 193
pocket, design for, 75 Walnut, 2, 26, 27, 80, 129, 160, 201, 202 Walnut, polishing,, 202 Washita slip, 190
Water-lily flowery 113
Wall
Tools, sharpening, 185 Tracery, carving Gothic, 82 Tracing designs, 196 Transferring designs, 194 Trefoil, the Gothic, 19 Tudor period referred to, 124,
Wings,
121
Wings of
132
:
Woods
for carving
Birch, 170
126
Tudor
80
work,
Mahogany,
Oak,
160, 201
of,
V V
V
V V tools, sharpening,
tool used for cutting channels of leaves, 70 tool used for outlining, 12, 20 tool used for setting in, 89 tool used for veining leaf,' 7
171, 175, 201, 202 Peartree, 170 Pine, 2, 10, 26, 27, 201, 203 Satin walnut, 80, 201, 203 Svcamore, 170, 203 Walnut, 2, 26, 27, 80, 129, 160, 201, 202 Woods for carving, notes on,
-
188
TUJC
CAMFFIKLP
PBfcJKa,
ST. AJ-BANi
1
14 DAY USE RETURN TO DESK FROM WHICH BORROWED
LOAN
DEPT.
This book is due on the last date stamped below, or on the date to which renewed. Renewals only: Tel. No. 642-3405 Renewals may be made 4 days prior to date due. Renewed books are subject to immediate recall.
REC'Din MAY 3
*
.
71
,
-12
M 4 1
3 '7 4
__
-,
;q
ft
JUNlO
RECCIR FEB 2 7
'81
mP
JAN
4 1982
noi
*n*
o.
'7i
General Library
1
(P2001.W)4?6^A.82
^^"grkefey
iwr
^^
LD
21-10m-5,'43 (6061s)
>
/
.J
/
a**
*
55N