Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    White: Smartcare Epoxy Triblock

    Uploaded by

    Amit
    SmartCare Epoxy TriBlock is a three-component epoxy cementitious coating for positive side waterproofing of cement structures. It has superior adhesion to smooth and cement surfaces, is microbial resistant, and provides a 2-year warranty. The product features a white color and each 850g pack covers approximately 28 square feet in two coats. It has a shelf life of 12 months and requires surface preparation before application in a two-coat process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    White: Smartcare Epoxy Triblock

    Uploaded by

    Amit
    1K views2 pages
    SmartCare Epoxy TriBlock is a three-component epoxy cementitious coating for positive side waterproofing of cement structures. It has superior adhesion to smooth and cement surfaces, is microbial resistant, and provides a 2-year warranty. The product features a white color and each 850g pack covers approximately 28 square feet in two coats. It has a shelf life of 12 months and requires surface preparation before application in a two-coat process.

    Original Description:

    Original Title

    smartcare-triblock-epoxy (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    SmartCare Epoxy TriBlock is a three-component epoxy cementitious coating for positive side waterproofing of cement structures. It has superior adhesion to smooth and cement surfaces, is microbial resistant, and provides a 2-year warranty. The product features a white color and each 850g pack covers approximately 28 square feet in two coats. It has a shelf life of 12 months and requires surface preparation before application in a two-coat process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views2 pages

    White: Smartcare Epoxy Triblock

    Uploaded by

    Amit
    SmartCare Epoxy TriBlock is a three-component epoxy cementitious coating for positive side waterproofing of cement structures. It has superior adhesion to smooth and cement surfaces, is microbial resistant, and provides a 2-year warranty. The product features a white color and each 850g pack covers approximately 28 square feet in two coats. It has a shelf life of 12 months and requires surface preparation before application in a two-coat process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Waterproofing

    PRODUCT CODE 5467

    SmartCare Epoxy TriBlock


    Asian Paints Epoxy Tri Block is an epoxy cementitious coating for positive side waterproofing of cementitious water
    retaining structures.

    PRODUCT BENEFITS
    Superior Adhesion Coating
    Good adhesion over smooth as well as cementitious Microbial resistant coating
    surfaces
    Warranty
    Superior Waterproofing 2 year warranty for cementitious water retaining
    Positive side waterproofing structure
    Safety
    Food grade certification, fit for storing portable water
    * All Asian Paints products contain no added
    Lead, Mercury, Arsenic or Chromium
    from April 2008.

    PRODUCT FEATURES
    AVAILABLE PACKS COLOURS AVAILABLE COVERAGE

    White 2 COATS
    28 sq. ft. per kg
    900 g 3250 g 850 g
    Hardener Cement Filler Base

    Shelf life: 12 months from the date of manufacturing in Please note: Asian Paints Epoxy TriBlock is **Actual coverage may vary from the quoted coverage due
    unopened condition. Store in a cool & dry place an undercoat to factors such as method and condition of application and
    surface roughness

    DRYING TIME TO TOUCH RECOMMENDED USAGE

    4-6
    0

    45 15

    30 HOURS

    Domestic cement tanks, Overhead cement tanks and Waterproofing of swimming pools

    HOW TO APPLY
    PRE PAINTING STEPS APPLICATION PROCESS
    APPLICATION PROCEDURE

    STEP 1 Stir the individual Base and Hardener well before use

    SURFACE PREPERATION SmartCare Epoxy Tri Block is STEP 2 Add Hardener into Base under continuous mixing
    a three-component system. The correct application procedure is
    very critical and should be followed as described below
    > Surface must be clean, free from contamination and structurally
    sound. STEP 3 In this mix, add Filler under continuous mixing
    > It is recommended that the surface should be in Saturated
    Surface Dry (SSD) condition.

    Slowly add water (20% by weight) into the above mix under continuous mixing, till you get a homogeneous
    STEP 4
    brushable consistency

    STEP 5 Apply the 1st coat of the above mixture over substrate using a brush and allow it to dry for 4 hours

    MIXING RATIO (by weight) The mixing ratio is


    Base: Hardener: Filler = 17 : 18 : 65 in weight, after mixing
    the three components together, add around 15 - 25% STEP 6 Apply the 2nd coat of mix perpendicular to 1st coat and allow it to dry for 4 hours
    water. (For this pack- 850 gm: 900 gm: 3.25 kg and around
    750 - 800 ml water.)
    Waterproofing

    ADDITIONAL INFORMATION

    PRECAUTIONS SAFETY FEATURES


    > Part mixing of Base, Hardener & Filler are > Kindly refer to the MSDS for Asian Paints SmartCare Epoxy TriBlock which gives detailed
    not allowed. information on safety measures.
    > All kinds of paints and coatings are to be > Store the container with the lid tightly closed in an upright position, in a cool & dry place.
    removed completely before application. > Keep out of reach of children and away from eatables.
    > Application over plastered / masonry > May be harmful if swallowed. In case of ingestion seek immediate medical attention.
    surface is recommended. > Wear eye protection during application. In case of contact with eyes, rinse immediately with
    > Drying time and coverage depends on plenty of water and seek medical advice.
    the condition of the surface and ambient > In case of skin contact immediately wash skin with soap and plenty of water. Get medical
    condition. attention if irritation develops or persists.
    > Not resistant to high concentrations of > Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding
    acids and alkalis. and surface preparation to avoid dust inhalation.
    > Do not pour leftover paint down the drain or in water courses.
    > In the event of spills, contain spillage using sand or earth.
    > No added Lead, Mercury or Chromium compounds.

    TECHNICAL DETAILS

    Properties Results

    Nature Three component

    Mixing ratio, By weight (Base:Hardener:Filler:Water) 17:18:65:20

    Consistency Free flowing smooth paste

    Pot life at 30°C, Minutes 60 Minutes

    Surface drying time at 30°C, Minutes 22 Minutes

    Inter-coat periods at 30°C, Hours 4 to 5 Hours

    Positive hydrostatic pressure DIN 1048 No water penetration found up till 4 bars

    Adhesion strength as per ASTM D 4541: 02 in (N/mm2) 3 Mpa

    Certified safe by CFTRI Mysore (Govt. Lab) to store


    Food Grade Certification
    potable water

    Version No. VN17/03/2016

    Version No. VN17/03/2016. Please note that this datasheet supersedes all previous versions
    For Feedback/complaints, write to Marketing Manager Services Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India

    You might also like