SV4-10-3/3P/3S: - Solenoid Valve
SV4-10-3/3P/3S: - Solenoid Valve
SV4-10-3/3P/3S: - Solenoid Valve
A
2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 2 to port working parts to limit leakage.
port 2 to 1 while port 3 is 3 while port 1 is blocked. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Sectional View Performance Data
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)*
*Flow from P1 to P2 must be less than 7,6 L/min (2 USgpm)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Max. flow port 1 to port 2-10 L/min (2.5 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
3 Housing material (standard) Aluminum
Weight including coil 0,42 kg (0.93 lbs)
Seal kit 889624 (Buna-N), 889688 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
5
application where a three way A
two position solenoid valve is 60 4
needed
45 3
30 2
B
15 1
0
0 1 2 3 4 5 6
Flow -U Sgpm (105 SU S oil@ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-580.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 An Eaton Brand
SV4-10-3/3P/3S - Solenoid Valve
3-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
A
Model Code SV4 – 10 (V) – 3 (*) – ** – **** * – 00
1 2 3 4 5 6 7 8 9
19.1
(0.75) Hex
26.2
(3.00)
38.1 25.4
(1.50) (1.00) Hex 25.4
24,6 (1.00)
(0.97)
3 34,8
57.2 2 2X7,14 (1.37)
(2.25) (0.28) 75,4
18,8 (2.97)
(0.74)
1
9.5
50 (0.38) 57,15
(1.97) (2.25)
75,4
(2.97)
WARNING WARNING
Maintain 5-8 Nm Flow from port 1 to
• •
(4-6 ft lbs) maximum port 2 must be less
torque on valve tube nut. than 7,6 L/min (2 USgpm).
Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
An Eaton Brand EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-581.A