ILLUSTRATED SPARE PART LIST

FOR

6K1080TA ENGINE
FOR POWER GENERATION
A/C – GOEM

APPLICATION CODE NO.

6H.5255

KIRLOSKAR OIL ENGINES LIMITED

Regd. Office: Laxmanrao Kirloskar Road, Khadki, Pune - 411 003, (India).
Tel.: +91 (20) 2581 0341, 2581 5341. Fax: +91 (20) 2581 3208, 2581 0209.
Website: www.koel.co.in

OCTOBER – 2013 PUBLICATION NO. 6H.561.40.0.00

1
 GROUP INDEX
APPLICATION CODE 6H.5255

PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
1 ADAPTOR FOR WATER SENSOR 6H.415.2 1 5
ADAPTORS & PIPING FOR
2 3H.345.4 1 6
LUB OIL DRAIN SYSTEM
AIR CLEANER ASSEMBLY WITH STRAP
3 6H.413.1 1 7
(MAHALE MODEL KFA-36-1-7435)
AIR CLEANER MOUNTING
4 6H.413.2 1 8
(6H.413.10.0.00)(6K)
5 AIR INLET MANIFOLD (ALUMINIUM) 6H.204.2 1 9
6 ALTERNATOR MOUNTING FASTSNERS 02.511.10 1 10
ALTERNATOR MOUNTING WITH
7 4H.1484.5 1 11,12
POLY V BELT PULLEY 6PK
8 ALTERNATOR PULLEY FOR POLY V 4H.1484.6 1 13
ALTERNATOR TO KG 545 CONTROL PANEL
9 F6.1024 1 14
BOARD WIRING HARNESS FOR SL90
ASSEMBLY OF RADIATOR AND CAC
10 6H.477.10 1 15
FOR 160 KVA 6K1080TA (TATA TOYO)
11 AVM 144 CRS CORI RUBBER 6H.118.9 1 16
12 BREATHER 6H.024 1 17
BREATHER HOSE FOR 6R/6K1080
13 6H.345.2 1 18
CPCB ENGINES (100 TO 160 KVA)
14 CAC IN AND OUT AIR PIPE (STAGE 1) 6H.030.1 1 19
15 CAC PIPES 6H.516.2 1 20
16 CAMSHAFT SF P2 TYPE THRUST WASHER 6H.226 1 21
17 CENTRIFUGE LUB OIL FILTER 6H.021 1 22
18 CHARGING ALTERNATOR 12V, 3H.315 1 23
19 COMBINED LEAK OFF PIPE - M12 UNION 6H.1124.1 1 24
20 CONNECTING ROD 6H.179 6 25
CONNECTION BETWEEN
21 6H.949.2 1 26
TURBO TO AIR CLENAER
22 COVER FOR FUEL PUMP BORE 4H.373 1 27
23 CRANK PULLEY FOR 6PK BELT 6H.1130.1 1 28
29 TO
24 CRANKCASE ( 6K1080 ENGINES) 6H.426 1
32
25 CRANKSHAFT (6 K 1080TA 160KVA ENGINE) 6H.387 1 33
34 TO
26 CYLINDER HEAD (FOR 6K ENGINE) 6H.1019.1 1
36
27 CYLINDER LINER.(105 DIA) 2H.008 6 37
28 DELIVERY BODY. 2H.013 1 38
29 DRAIN PUMP & MOUNTING 3H.345.5 1 39
ENGINE TO PANEL WIRING HARNESS
30 ASSEMBLY WITH 4PIN &15 PIN 6H.1009.40 1 40
CONNECTOR & KG 545 UNIT
ENGINE WIRING HARNESS FOR 6K
31 6H.1009.1 1 41,42
WITH KG 545 & SEDEMAC GOVERNOR
32 EXHAUST MANIFOLD (6K ENGINES) 6H.011.3 1 43

2
 PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
33 EXPANSION BELLOW (4") AND MOUNTING F6.550 1 44
34 F.I.P FOR 6K1080 TA (160 KVA) 6H.100 1 45,46
35 FLYWHEEL ASSEMBLY-PG 03.050.1 1 47
FLYWHEEL HOUSING (SAE 2) WITHOUT
36 3H.085.2 1 48
STARTER FLANGE S/F MICO STARTER 6H.675
FRONT COVER SF VISCOUS
37 6H.229.4 1 49,50
DAMPER, HYD PUMP BORE
FUEL LEVEL SENSOR SUITABLE
38 6H.192.1 1 51
FOR 170MM FUEL TANK HEIGHT
39 FUEL PIPES FOR 6K 4H.899.5 1 52
40 FUEL PUMP GEAR. 2H.011 1 53
41 GAS OUTLET MANIFOLD (K26-TURBO) 6H.027 1 54
42 GEAR CASING FOR (6K1080 TA) 6H.311.1 1 55
43 HIGH PRESSURE PIPE (700MM) 6H.009 1 56
HOSES FOR 6H.413.10.0.00 AIR
44 6H.413.3 1 57
CLENAER ASSEMBLY (6K)
HOUSING FOR EXHAUST
45 6H.026 1 58
OUTLET (K26 TURBO)
46 INJECTOR (S-TYPE) - MICO 6H.101 6 59
INTERMEDIATE GEAR SUPPORT
47 6H.293 1 60
(W/O AUTO TIMER)
48 K LUB OIL 4H.559.1 25 61
49 KIT GROUP 6H.415.1 1 62
KIT GROUP (S/F 6K -140 & 63 TO
50 6H.936.5 1
160 KVA CANOPY GENSET) 65
51 KIT GROUP FOR CC GENSET. 02.511.11 1 66
52 LIFTING HOOK 6H.048 1 67
53 LINKAGE FOR ELECTRONIC GOVERNOR 6H.245.3 1 68
LUB OIL COOLER AND FILTER
54 6H.113...EXP 1 69,70
(FOR JACKET WATER HEATING)
71 TO
55 LUB OIL PUMP FOR 6K 1080 TA (160 KVA) 6H.985 1
73
56 LUB OIL SUMP (6K ENGINE) 6H.378.1 1 74
LUBE OIL PRESSURE SENDOR,(SENSOR +
SWITCH), VDO SIEMENCE (INDIA), 2
57 2H.092.6 1 75
TERMINAL, BODY GROUND WITH
IMPORTED BOBBIN ASSEMBLY
MAGNETIC PICK UP 16X1.5 THREADING
58 (UNITCH MAKE) FOR 250 KVA WITH 110 F6.741.16 1 76
SERIES MSSL CON.
MATTING FLANGES FOR 6R/6K1080
59 6H.352.2 1 77
CPCB ENGINES (100 TO 160 KVA)
60 MOUNTING FOOT FOR 6K1080 ENGINES 6H.327.1 1 78
MOUNTING FOR 30" PLASTIC
61 6H.1171.2 1 79,80
FAN WITH POLY V BELT 7PK
MOUNTING FOR SPIN ON FUEL FILTER
62 6H.081.2 1 81
& PIPING ON INLET MANIFOLD
63 MOUNTING OF B12 E GOVERNOR 6H.245.2 1 82,83
64 OIL FILLING BODY PTL 3H.042 1 84

3
 PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
65 OIL SEAL HOUSING (ALUMINIUM) 6H.045.4 1 85
66 PISTON FOR 6K1080 TA (160 KVA) 6H.247.1 6 86
67 POLY V BELT 4H.1493.2 1 87
68 PUSHROD & TAPPETS 2H.007 6 88
69 RADIATOR CONNECTIONS LOOSE 6H.477.8 1 89
70 RADIATOR FAN & MTG. F6.375.1 1 90
71 RADIATOR MTG. ON BASE FRAME 6H.477.7 1 91
72 RADIATOR STAY 6H.019.3 1 92
73 RAIN CAP ASSEMBLY FOR EXHAUST BEND 4H.446.50 1 93
74 RAIN CAP FOR EXHAUST FOR 160 KVA F6.779.21 1 94
75 ROCKER COVER FOR SHANTI 6H.222 1 95,96
76 SENSOR FOR TEMPERATURE GAUGE 46.065.1 1 97
77 SET OF PART ALONG WITH KG545 UNIT DV2.852 1 98
SILENCER NELSON MAKE HOSPITAL
78 GRADE FOR 100 AND 125 KVA 6H.352.01 1 99
(NELSON PART NO 43440F)
SPIN ON FUEL FILTER
79 3H.132 1 100
(MICO NO F002 H20 116)
STARTER MOTOR MICO MAKE 12V, 3KW,
80 6H.675 1 101
TYPE DE114X2012 V R (3KW) FOR 6R 1040.
81 SUCTION TUBE FOR 6K1080 TA (160KVA) 6H.986 1 102
THERMOSTAT AND MNTG.
82 4H.096 1 103,104
(UPWORD OPENING)
83 TURBO LUB OIL PIPING (K26) 6H.034 1 105
84 TURBOCHARGER AND MOUNTING 6H.391 1 106
85 VALVE ROCKER ASSEMBLY 6H.012 1 107,108
VENT CONNECTIONS FOR 6K
86 4H.1712.7 1 109
ENGINES (FITTED ON ENGINE)
VENT CONNECTIONS FOR 6K
87 4H.1712.8 1 110
ENGINES (LOOSE WITH ENGINE)
88 WATER PUMP (282.5 CRS) 4H.052 1 111
89 WATER PUMP PULLEY & FASTENERS 4H.1483.12 1 112
90 WATRE IN OUT CONNECTIONS 6H.477.3 1 113
91 SET OF JOINTS 6H.1200.23 1 114
92 SET OF COPPER WASHERS 6H.1200.24 1 116
93 SET OF 'O' RINGS 6H.522.53 1 117
94 SET OF BEARINGS 1 118

NOTE: - AS CONTINUOUS IMPROVEMENTS ARE CONTEMPLATED THE ILLUSTRATION

AND DESCRIPTIONS ARE NOT BINDING.

4
TITLE: - ADAPTOR FOR WATER SENSOR GROUP: - 6H.415.2

3 4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.225.13.0.00 SPACER FOR VENT CONNECTION 1
2 50.504.04.000. BANJO BOLT - M14X1.5 1
ADAPTOR FOR WATER TEMP.
3 4H.225.14.0.00 1
SWITCH
HOSE TAIL CONNECTION (S/F M14
4 06.610.10.0.00 1
BANJO)
5 50.508.12.000. COPPER WASHER (14X20) 5

5
TITLE: - ADAPTORS & PIPING FOR LUB OIL
GROUP: - 3H.345.4
DRAIN SYSTEM

10
8
6 11
9
1
5
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ADAPTOR FOR OIL SUMP
1 3H.147.04.0.00 1
(MALE, BENJO TYPE)
2 50.504.06.000. BANJO BOLT - M18X1.5 1
3 50.508.17.000. COPPER WASHER (18X24) 2
4 3H.153.11.0.00 DRAIN COCK 1
ADAPTOR FOR OIL SUMP
5 3H.147.03.0.00 1
(MALE BOTH SIDE TYPE)
LUB. OIL SUMP DRAIN PIPE S/F
6 4H.1285.07.0.00 1
NEW LUB. OIL HAND PUMP
WORM DRIVE HOSE CLIP
7 2H.064.03.0.00 2
(JUPITOR JW7B9, 20 - 25 DIA )
LUB OIL DRAIN PIPE FROM PUMP
8 4H.1713.03.0.00 1
TO SUMP
9 04.452.03.0.00 U-CLAMP FOR SUMP DRAIN PIPE 1
10 50.006.06.000. NUT - M6X1 - GR.8.8 2
11 03.023.02.0.00 SPL. PLAIN WASHER - M6 2

6
TITLE: - AIR CLEANER ASSEMBLY WITH
STRAP (MAHALE MODEL GROUP: - 6H.413.1
KFA-36-1-7435)

1
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

RADIAL SEAL AIR CLEANER NOT SUPPLIED
1 6H.413.10.0.00 1
ASSLY,15 CU METER LOOSE
PRIMARY ELEMENT FOR NOT
*2 6H.413.02.0.00 1
6H.413.10.0.00 AIR CLEANER ILLUSTRATED
1/8" NPT-24" RANGE RESTRICTION
3 F6.504.02.0.00 1
INDICATOR
4 50.003.10.025. SET SCREW - M10X1.5X25 - 8.8 4
5 50.506.10.000. PLAIN MACHINED WASHER - M10 4

7
TITLE: - AIR CLEANER MOUNTING GROUP: - 6H.413.2

3 2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.949.01.0.00 AIR CLEANER BRACKET 1
2 50.003.10.040. SET SCREW - M10X1.5X40 - 8.8 2
3 50.506.10.000. PLAIN MACHINED WASHER - M10 2

8
TITLE: - AIR INLET MANIFOLD (ALUMINIUM) GROUP: - 6H.204.2

3
2
4

2
1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.204.03.0.00 INLET MANIFOLD 1
2 3H.015.11.0.00 JOINT FOR AIR INLET MANIFOLD 2
3 50.002.08.035. SET BOLT - M8X1.25X35 - 8.8 12
4 50.506.08.000. PLAIN MACHINED WASHER - M8 12

9
TITLE: - ALTERNATOR MOUNTING
GROUP: - 02.511.10
FASTERNERS

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 50.548.12.000. SPL. PLAIN WASHER - M12 2
2 50.003.12.040. SET SCREW - M12X1.75X40 - 8.8 2

10
TITLE: - ALTERNATOR MOUNTING WITH
GROUP: - 4H.1484.5
POLY V BELT PULLEY 6PK

9 21
17 9
4
18 8
24 13
3
9

19
20 6

16
15 11
10
9
23 12
22
5 14
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ALTERNATOR MOUNTING KIT
*1 4H.1484.30.0.00 1 OF SR. NO.
FOR POLY V BELT 2 & 8 TO 20
CONSISTING
MOUNTING SUBASLY. FOR
*2 4H.044.20.0.00 1 OF SR. NO.
ALTERNATOR 3 TO 7
3 48.175.07.0.00 BKT.FOR ALT 1
BUSH FOR ALTERNATOR (IN
4 48.067.04.0.00 1
BRACKET) 32MM
5 50.006.10.000. NUT - M10X1.5 - GR.8.8 1
DOWEL BOLT FOR ALTERNATOR
6 48.067.03.7.00 1
M10X1.5 (130MM)
7 50.506.10.000. PLAIN MACHINED WASHER - M10 2
8 50.003.10.040. SET SCREW - M10X1.5X40 - 8.8 2
9 50.506.10.000. PLAIN MACHINED WASHER - M10 6
LOCATING BOLT (FOR EYE BOLT)
10 4H.198.02.0.00 1
65MM
11 50.506.12.000. PLAIN MACHINED WASHER - M12 1
12 50.002.10.055. SET BOLT - M10X1.5X55 - 8.8 1

11
TITLE: - ALTERNATOR MOUNTING WITH
GROUP: - 4H.1484.5
POLY V BELT PULLEY 6PK

9 21
17 9
4
18 8
24 13
3
9

19
20 6

16
15 11
10
9
23 12
22
5 14
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

13 50.006.10.000. NUT - M10X1.5 - GR.8.8 3
14 4H.329.26.0.00 SWIVEL PIECE 1
15 50.003.08.010. SET SCREW - M8X1.25X10 - 8.8 1
16 50.548.08.000. SPL.PLAIN M/CED WASHER 1
17 50.003.06.012. SET SCREW - M6X1X12 - 8.8 2
18 50.506.06.000. PLAIN MACHINED WASHER - M6 2
19 4H.329.24.0.00 EYE BOLT (190MM) 1
20 4H.561.01.0.00 SPACER 11 I.D. X 24 O.D. X 25.5 L 1
21 50.003.06.012. SET SCREW - M6X1X12 - 8.8 2
22 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 1
23 50.506.08.000. PLAIN MACHINED WASHER - M8 3
24 4H.198.04.0.00 BELT GUARD 1

12
TITLE: - ALTERNATOR PULLEY FOR POLY V GROUP: - 4H.1484.6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

PUEELY FOR ALTERNATOR 56.5
1 4H.1484.11.0.00 1
P.C.D

13
TITLE: - ALTERNATOR TO KG 545 CONTROL
PANEL BOARD WIRING HARNESS GROUP: - F6.1024
FOR SL90

D2
ALTERNATOR SIDE

D1
CONTROL PANEL SIDE

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ALTERNATOR TO KG 545
1 F6.1024.10.0.00 CONTROL PANEL BOARD WIRING 1
HARNESS FOR SL90

14
TITLE: - ASSEMBLY OF RADIATOR AND CAC
GROUP: - 6H.477.10
FOR 160 KVA 6K1080TA (TATA TOYO)

2
1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ASSEMBLY OF RADIATOR AND
CONSISTING
1 6H.477.10.00.00 CAC FOR 160 KVA 6K1080TA 1 OF SR. NO. 2
(TATA TOYO)
RADIATOR CAP 13 PSI
2 48.213.03.0.00 1
WITH 2SEALING WASHER

15
TITLE: - AVM 144 CRS CORI RUBBER GROUP: - 6H.118.9

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ANTI VIBRATION MOUNTING 144
1 6H.118.02.0.00 4
CRS CORI RUBBER
2 50.506.12.000. PLAIN MACHINED WASHER - M12 16
3 50.006.12.000. NUT - M12X1.75 - GR.8.8 8
4 50.003.12.040. SET SCREW - M12X1.75X40 - 8.8 8

16
TITLE: - BREATHER GROUP: - 6H.024

3
10

5 6
1

7
5
4 9

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.024.03.0.00 BREATHER PIPE 1
2 6H.024.04.0.00 CLIP (FOR BREATHER PIPE) 1
3 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 3
HOSE FOR BREATHER
4 6H.024.05.0.00 1
PIPE (32mm I.D.)
WORM DRIVE CLAMP (JUPITOR
5 2H.112.02.0.00 2
JW7B13, 29 TO 45 DIA)
6 6H.024.06.0.00 BREATHER EXTENSION PIPE 1
BRACKET FOR BRETHER
7 6H.024.07.0.00 1
EXTENSION PIPE
8 50.006.06.000. NUT - M6X1 - GR.8 2
9 03.023.02.0.00 SPL. PLAIN WASHER - M6 2
10 04.452.03.0.00 U-CLAMP FOR SUMP DRAIN PIPE 1

17
TITLE: - BREATHER HOSE FOR 6R/6K1080
GROUP: - 6H.345.2
CPCB ENGINES (100 TO 160 KVA)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

BREATHER PIPE FOR 125 KVA
1 6H.345.04.0.00 1
SILENT SET
2 50.519.08.0.00 WORM DRIVE HOSE CLIP (41 MM) 1

18
TITLE: - CAC IN AND OUT AIR PIPE (STAGE 1) GROUP: - 6H.030.1

9
11
1
2
3

12 8
5 7
3
10
6
11

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

AIR PIPE (TURBOCHARGER
1 6H.030.08.0.00 1
TO CAC ) - T/C SIDE
2 6H.058.02.0.00 JOINT FOR AIR PIPE 2
3 30.650.04.0.00 HOSE CLIP (S.S.60 DIA.) 2
RUBBER HOSE(COMPRESSOR
4 4H.168.03.0.00 1
OUTLET)-K24 TURBO
5 6H.030.11.0.00 BRACKET FOR AIR PIPE 1
6 50.003.08.016. SET SCREW - M8X1.25X16 - 8.8 4
7 50.548.08.000. SPL.PLAIN M/CED WASHER 4
8 6H.030.03.0.00 CLAMP FOR CAC PIPE 2
9 50.003.08.035. SET SCREW - M8X1.25X35 - 8.8 4
10 50.003.08.040. SET SCREW - M8X1.25X40 - 8.8 4
11 50.506.08.000. PLAIN MACHINED WASHER - M8 12
12 50.006.08.000. NUT- M8X1.25 - GR.8 4

19
TITLE: - CAC PIPES GROUP: - 6H.516.2

1 5

2
4 6 8 4
3
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

AIR PIPE (TURBOCHARGER TO
1 6H.516.01.0.00 1
CAC)
2 6H.516.02.0.00 AIR PIPE (CAC TO AIR INLET) 1
3 50.003.08.035. SET SCREW - M8X1.25X35 - 8.8 4
4 50.506.08.000. PLAIN MACHINED WASHER - M8 8
5 50.006.08.000. NUT- M8X1.25 - GR.8 4
6 50.003.08.030. SET SCREW - M8X1.25X30 - 8.8 4
HOSE (DONALDSON-P532944-3
7 F6.377.08.0.00 RINGS-4 PLY-102X152 260 DEGC 2
CAC - INLET
T-BOLT CLAMP JUPITER JT6A20
8 F6.680.25.0.00 4
(100 - 108 DIA RANGE)

20
TITLE: - CAMSHAFT SF P2 TYPE THRUST
GROUP: - 6H.226
WASHER

5
6
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CAMSHAFT,THRUST PLATE AND
*1 6H.226.10.0.00 1 OF SR.NO. -
CAMGEAR SUB ASSEMBLY 2 TO 6
NOT SUPPLIED
2 6H.226.01.0.00 CAM SHAFT (FINISHED) 1 LOOSE
NOT SUPPLIED
3 6H.226.03.0.00 THRUST PLATE 1 LOOSE
NOT SUPPLIED
4 6H.226.02.0.00 CAM GEAR 1 LOOSE
5 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 2
6 50.506.08.000. PLAIN MACHINED WASHER - M8 2

21
TITLE: - CENTRIFUGE LUB OIL FILTER GROUP: - 6H.021

7 5

6 3
4

2
9

10
11

8
9

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CENTRIFUGE FILTER AND
*1 6H.021.40.0.00 1 OF SR. NO. 2
ADAPTOR ASSEMBLY TO 7
ADAPTOR FOR CENTRIFUGAL LUB
2 6H.021.01.0.00 1
OIL FILTER
3 F6.024.46.0.00 CENTRIFUGE FILTER 1
4 F6.024.75.0.00 JOINT FOR GLACIER FILTER 1
5 50.010.08.025. STUD - M8X1.25X025 - 8.8 4
6 50.506.08.000. PLAIN MACHINED WASHER - M8 4
7 50.006.08.000. NUT- M8X1.25 - GR.8.8 4
8 50.002.08.055. SET BOLT - M8X1.25X55 - 8.8 2
9 50.506.08.000. PLAIN MACHINED WASHER - M8 4
10 50.002.08.105. SET BOLT - M8X1.25X105 - 8.8 1
JOINT FOR CENTRIFUGAL FILTER
11 6H.021.11.0.00 1
ADAPTOR

22
TITLE: - CHARGING ALTERNATOR 12V,
35 A, MICO MAKE K1 MODEL GROUP: - 3H.315
F 002 G1B 342 120 DEGREE MOUNTING.

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ASSEMBLY CHARGING
ALTERNATOR 12V, 35A, MICO
1 3H.315.01.0.00 1
MAKE K1 MOCEL NO.F 002 G1B 342
120 DEGREE MOUNTING

23
TITLE: - COMBINED LEAK OFF PIPE GROUP: - 6H.1124.1

1
3
3
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.1124.20.0.00 LEAK OFF PIPE ASSEMBLY 1
2 03.027.04.0.00 BANJO BOLT 6
3 50.508.05.000. COPPER WASHER (8X12) 12

24
TITLE: - CONNECTING ROD GROUP: - 6H.179

5
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CONNECTING ROD ASM WITH
*1 6H.179.20.0.00 1 OF SR. NO
SMALL END BUSH 2 TO 5
NOT SUPPLIED
2 6H.179.05.0.00 CONNECTING ROD 1 LOOSE
3 34.026.03.0.00 BOLT FOR CON.ROD 2
4 34.026.02.0.00 DOWEL FOR CON.ROD 2
SMALL END BUSH FOR
5 6H.111.01.0.00 1
6K1080 TA (160 KVA)
CONSISTING
*6 6H.179.04.0.00 LARGE END BEARING (PAIR) 1 OF SR. NO
7&8
SPUTTER BEARING NOT SUPPLIED
7 6H.179.06.0.00 1
(KS MAKE) (CON ROD) LOOSE
NOT SUPPLIED
8 6H.179.03.0.00 LARGE END BEARING (BOTTOM) 1 LOOSE

25
TITLE: - CONNECTION BETWEEN
GROUP: - 6H.949.2
TURBO TO AIR CLENAER

4
3

2
6
5 6
7

9
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

AIR PIPE (AIR CLEANER TO
1 6H.139.01.0.00 1
COMPRESSOR)
2 6H.028.05.0.00 BRACKET (FOR AIR PIPE) 1
HOSE FOR AIR CLEANER
3 03.063.02.0.00 1
(70 IDX80 L)
JUPITER WORM DRIVE CLAMP,
4 48.305.07.0.00 TYPE 603,80mm DIA(S/F 80mm 2
HOSE O.D.)
5 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 4
6 50.506.08.000. PLAIN MACHINED WASHER - M8 6
7 50.003.08.016. SET SCREW - M8X1.25X16 - 8.8 2
8 50.003.10.016. SET SCREW - M10X1.5X16 - 8.8 2
9 50.506.10.000. PLAIN MACHINED WASHER - M10 2

26
TITLE: - COVER FOR FUEL PUMP BORE GROUP: - 4H.373

1 2
5
3

5
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.373.01.0.00 COVER FOR FUEL PUMP BORE 1
2 4H.373.02.0.00 ORING FOR FUEL PUMP COVER 1
3 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 1
4 50.002.08.035. SET BOLT - M8X1.25X35 - 8.8 3
5 50.506.08.000. PLAIN MACHINED WASHER - M8 4

27
TITLE: - CRANK PULLEY FOR 6PK BELT GROUP: - 6H.1130.1

3
1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CRANK PULLEY
1 6H.1130.01.0.00 (WITH POLY V GROVES FOR W.P 1
AND FAN DRIVE ) 6PK & 7PK
CRANK PULLEY BOLT-UPDATED
2 03.016.02.0.00 1
(110MM)
WASHER (FOR CRANK PULLEY
3 03.016.03.0.00 1
BOLT) - UPDATED

28
TITLE: - CRANKCASE (6K1080 ENGINES) GROUP: - 6H.426

29 6 44
15 43

20
16 30 21
19
17 18
27 24
26
23
32 28 22
42
38
33 41

14 9
35
34 13 39
25
12 10 7
31 11 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
MONOBLOCK CRANK CASE
*1 6H.233.10.0.00 1 OF SR. NO. 2 &
WITHOUT BEARING 26 TO 32
CONSISTING
MONOBLOCK CRANK CASE &
*2 6H.233.20.0.00 1 OF SR. NO. 3 &
BEARING CAP ASSLY. 24,25
CONSISTING
MONOBLOCK CRANK CASE WITH
*3 6H.233.30.0.00 1 OF SR. NO. 4 &
SEALING CAP 18 TO 23
CONSISTING
MONOBLOCK CRANK CASE SUB
*4 6H.233.40.0.00 1 OF SR. NO.
ASSLY. 5 TO 17
CRANK CASE SF P2 TYPE THRUST CONSISTING
*5 6H.233.01.0.00 1
WASHER OF SR. NO.6
NOT SUPPLIED
6 6H.001.25.0.00 MONOBLOCK CRANKCASE 1
LOOSE
CRANK SHAFT PLUG -
7 34.003.07.0.00 2
ALUMINIUM
8 34.003.08.0.00 WASHER FOR ALU.PLUG. 2

29
TITLE: - CRANKCASE (6K1080 ENGINES) GROUP: - 6H.426

29 6 44
15 43

20
16 30 21
19
17 18
27 24
26
23
32 28 22
42
38
33 41

14 9
35
34 13 39
25
12 10 7
31 11 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

MAIN BEARING CAP (FLYWHEEL NOT SUPPLIED
9 6H.001.06.0.00 1
END) LOOSE
NOT SUPPLIED
10 6H.001.08.0.00 MAIN BEARING CAP 5 LOOSE
11 6H.001.07.0.00 MAIN BEARING CAP (FINISH) G.E. 1
BOLT FOR MB CAP(HEX HEAD)
12 03.001.22.0.00 14
M14X2X128
13 02.001.04.0.00 SPECIAL WASHER FOR M14 BOLT 14
14 B2.005.16.0.00 HOLLOW DOWEL(M.B.CAP) 14
15 F6.007.34.0.00 SEALING CAP 4
16 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 3
17 4H.001.05.0.00 SEALING CAP 4
18 50.610.12.000. CORE PLUG 1
19 50.508.10.000. COPPER WASHER (12X18) 1
20 04.001.08.0.00 PRECOATED SCREW PLUG 2
21 50.508.18.000. COPPER WASHER (20X24) 2
22 03.001.06.0.00 SCREW PLUG 2
23 50.508.14.000. COPPER WASHER (16X22) 2
24 02.037.04.0.00 DIPSTICK GUIDE 1

30
TITLE: - CRANKCASE (6K1080 ENGINES) GROUP: - 6H.426

29 6 44
15 43

20
16 30 21
19
17 18
27 24
26
23
32 28 22
42
38
33 41

14 9
35
34 13 39
25
12 10 7
31 11 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

25 02.002.04.0.00 STEEL BALL 1
26 03.001.04.0.00 CAM BUSH 1
27 02.001.13.0.00 DISC PLUG 1
28 50.508.12.000. COPPER WASHER (14X20) 1
PISTON COOLING NOZZLE
29 6H.426.10.0.00 6
ASSEMBLY (FOR 6K1080TA ENGINE)
SUB. ASSEMBLY OF SPECIAL
30 4H.156.07.0.00 BANJO BOLT (FOR OIL SPRAY 6
NOZZLE.)
ADAPTER FOR LUB OIL TEMP.
31 6H.001.21.0.00 1
SWITCH
CORE PLUG-HEXAGONAL SOCKET
32 50.610.14.000. 5
HEAD(DIN-908)
33 6H.426.02.0.00 MAIN BEARING (TOP) 7
34 6H.426.03.0.00 MAIN BEARING (BOTTOM) 6
35 6H.426.04.0.00 MAIN BEARING BOTTOM (GE) 1
CONSISTING
THRUST WASHER SET OF INNER &
*36 6H.001.05.0.00 1 OF SR. NO.
OUTER PAIRS 37 & 40

31
TITLE: - CRANKCASE (6K1080 ENGINES) GROUP: - 6H.426

29 6 44
15 43

20
16 30 21
19
17 18
27 24
26
23
32 28 22
42
38
33 41

14 9
35
34 13 39
25
12 10 7
31 11 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*37 6H.001.03.0.00 THRUST WASHER PAIR(INNER) 1 OF SR. NO.
38, 39
THRUST WASHER (INNER) TOP
38 6H.001.09.0.00 1
SIDE
THRUST WASHER (INNER)
39 6H.001.11.0.00 1
BOTTOM SIDE
CONSISTING
*40 6H.001.04.0.00 THRUST WASHER PAIR (OUTER) 1 OF SR. NO.
41,42
THRUST WASHER(OUTER)
41 6H.001.13.0.00 1
BOTTOM SIDE
THRUST WASHER(OUTER) TOP
42 6H.001.12.0.00 1
SIDE
43 50.401.08.014. DOWEL 2
44 50.540.09.016. SPRING DOWEL PIN 2

32
TITLE: - CRANKSHAFT (6 K 1080TA 160KVA
GROUP: - 6H.387
ENGINE)

4 9
6
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CRANKSHAFT AND CRANKGEAR
*1 6H.387.20.0.00 1 OF SR. NO.
ASSLY. 2 & 8,9
CONSISTING
*2 6H.387.10.0.00 CRANKSHAFT ASSLY. 1 OF SR. NO
3 TO 7
NOT SUPPLIED
3 6H.387.01.0.00 CRANKSHAFT (FINISH) 1
LOOSE
4 6H.387.02.0.00 BALANCE WEIGHT 6
SOCKET HEAD BOLT -
5 04.005.12.0.00 12
M12X1.75X60 -10.9
6 02.005.04.0.00 WASHER 12
7 50.401.08.025. DOWEL PIN 8X25 1
8 4H.002.01.0.00 CRANK SHAFT GEAR (FINISH/) 1
9 50.401.08.065. DOWEL PIN 8X65 1

33
TITLE: -CYLINDER HEAD (FOR 6K ENGINE) GROUP: - 6H.1019.1

19
18
31 17
21 23
27 16 9
22
26 24 10
7
20 3
28
8
15
29
30
25

12 14
11
5 4
32

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CYLINDER HEAD ASSEMBLY (6K
*1 6H.1019.50.0.00 1 OF SR. NO.
ENGINE) 2 & 14 TO 25
SUB ASSEMBLY OF CYL.HEAD
CONSISTING
(WITH VALVE SEAT OF VALVE
*2 6H.1019.40.0.00 1 OF SR. NO.
GUIDE BORE MACHINING IN 3 TO 6
POSITION)
NOT SUPPLIED
3 6H.1019.12.0.00 CYLINDER HEAD (FOR 6K ENGINE) 1 LOOSE
4 6H.1019.07.9.00 VALVE SEAT INSERT (INLET) 6
5 6H.1019.08.9.00 VALVE SEAT INSERT (EXHAUST) 6
CONSISTING
ASSEMBLY OF SEMIFINISH VALVE
*6 4H.007.38.0.00 12 OF SR. NO.-
GUIDE & SNAP RING 7&8
7 4H.007.02.9.00 VALVE GUIDE ( SEMI-FINISH) 1
8 02.022.18.0.00 WIRE SNAP RING 1
CORE PLUG-HEXAGONAL SOCKET
9 50.610.16.000. 1
HEAD(DIN-908)
10 50.508.16.000. COPPER WASHER (18X22) 1
11 50.610.24.000. CORE PLUG 5

34
TITLE: -CYLINDER HEAD (FOR 6K ENGINE) GROUP: - 6H.1019.1

19
18
31 17
21 23
27 16 9
22
26 24 10
7
20 3
28
8
15
29
30
25

12 14
11
5 4
32

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

12 50.508.29.000. COPPER WASHER (26X32) 5
CONSISTING
VALVE PAIR FOR 160 KVA
*13 6H.1019.60.0.00 1 OF SR. NO. 14,
6R1080TA ENGINE
15
14 6H.1019.09.0.00 INLET VALVE 6
15 6H.1019.11.0.00 EXHAUST VALVE 6
16 34.013.13.0.00 CUP FOR VALVE SPRING. 12
17 02.022.13.0.00 VALVE SPRING 12
18 02.022.11.0.00 VALVE CUP 12
19 02.022.28.0.00 VALVE COLLET(3-GROOVE) 12
20 50.010.10.050. STUD - M10X1.5X50 - 8.8 6
21 50.006.10.000. NUT - M10X1.5 - GR.8.8 12
22 4H.007.08.0.00 BUTTON FOR INJECTOR YOKE. 6
23 50.010.10.075. STUD - M10X1.5X75 - 8.8 6
24 02.022.06.0.00 WASHER 6
GASKET (FOR CYL.HEAD)-1.22 MM
25 6H.007.06.0.00 1
THK.
26 50.506.10.000. PLAIN MACHINED WASHER - M10 12
27 50.010.10.070. STUD - M10X1.5X70 - 8.8 6

35
TITLE: -CYLINDER HEAD (FOR 6K ENGINE) GROUP: - 6H.1019.1

19
18
31 17
21 23
27 16 9
22
26 24 10
7
20 3
28
8
15
29
30
25

12 14
11
5 4
32

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

28 50.010.10.050. STUD - M10X1.5X50 - 8.8 6
29 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 5
30 4H.007.07.0.00 BOLT FOR CYLINDER HEAD. 26
31 50.006.10.000. NUT - M10X1.5 - GR.8.8 12
PLASTIC CAP FOR VALVE GUIDE
32 4H.007.37.0.00 12
PROTECTION

36
TITLE: -CYLINDER LINER. (105 DIA) GROUP: - 2H.008

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CYLINDER LINER (105mm DIA.)A-
1 2H.008.01.0.00 1
GROUP
2 2H.008.07.0.00 O RING (FOR CYL.LINER) 2
O RING FOR CYLINDER LINER
3 2H.008.11.0.00 1
(VITON MATERIAL)

37
TITLE: - DELIVERY BODY GROUP: - 2H.013

7 2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 2H.013.10.0.00 DELIVERY BODY ASSEMBLY 1 OF SR. NO.
2, 6 & 7
2 2H.013.01.0.00 DELIVERY BODY 1
3 50.002.08.045 SET BOLT - M8X1.25X45 - 8.8 3
4 50.506.08.000 PLAIN MACHINED WASHER - M8 3
5 2H.013.11.0.00 JOINT FOR DELIVERY BODY 1
6 2H.014.01.0.00 DELIVERY TUBE 1
7 2H.014.02.0.00 ‘O’ RING (FOR DELIVERY TUBE) 2

38
TITLE: - DRAIN PUMP & MOUNTING GROUP: - 3H.345.5

2
4

7
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

LUB. OIL DRAIN HAND PUMP
1 3H.345.10.0.00 ASSEMBLY (SAM INTEGRATION 1
PVT. LTD, PUNE)
LUB. OIL PUMP MOUNTING
2 6H.399.08.0.00 BRACKET 1
(CRANCK CASE MOUNTED)
3 50.003.06.030. SET SCREW - M6X1X30 - 8.8 4
4 50.506.06.000. PLAIN MACHINED WASHER - M6 8
5 50.006.06.000. NUT - M6X1 - GR.8.8 4
6 50.003.14.035. SET SCREW - M14X2X35 - 8.8 2
7 50.506.14.000. PLAIN MACHINED WASHER - M14 2

39
TITLE: - ENGINE TO PANEL WIRING HARNESS
ASSEMBLY WITH 4PIN &15 PIN GROUP: - 6H.1009.40
CONNECTOR & KG 545 UNIT

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

4PIN CONNECTOR HOUSING TYCO NOT
*1 47.569.11.0.00 1
MAKE (MALE) TYPE-235304-1 ILLUSTRATED
50 AM. TERMINAL TYCO MAKE NOT
*2 47.569.12.0.00 3 ILLUSTRATED
(MALE) TYPE-280075-2
15PIN CONNECTOR HOUSING NOT
*3 47.569.13.0.00 1 ILLUSTRATED
TYCO MAKE (MALE) TYPE- 85114-1
20 AMP. TERMINAL TYCO MAKE NOT
*4 47.569.14.0.00 2 ILLUSTRATED
(MALE) TYPE-170341-1
5 AMP. TERMINAL TYCO MAKE NOT
*5 47.569.15.0.00 7 ILLUSTRATED
(MALE) TYPE-173645-1
TPA FOR 4PIN CONNECTORTYCO NOT
*6 47.569.16.0.00 1 ILLUSTRATED
MAKE TYPE-72342-1-

40
TITLE: -ENGINE WIRING HARNESS FOR 6K
GROUP: - 6H.1009.1
WITH KG 545 & SEDEMAC GOVERNOR

D4
W.T. SENSOR
D5
ACTUATOR

L
NE
PA
SID NTR 1
LOP

OL
D
D7
VOLTAGE
CO

E
SUPPRESSOR
D6 ST D
MAGNETIC AR 3
TE
PICK UP R
D8
ENGINE
CONTROL UNIT

OR
AT
TE D2
RN
3 8

AL
4 5
6
10
14
9 11 12
7
2
13

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ENGINE WIRING HARNESS
1 6H.1009.30.0.PR ASSEMBLY FOR 6K WITH KG 545 & 1
SEDEMAC GOVERNOR
2 50.506.08.000. PLAIN MACHINED WASHER - M8 4
CLIP FOR FLEXIBLE PIPE
3 34.151.03.0.00 4
WITH SLEEVE
4 3H.905.01.0.00 RUBBER SLEEVE 16 DIA 1
5 22.118.01.0.00 RUBBER SLEEVE(12DIA) 4
6 3H.905.03.0.00 RUBBER SLIVE 27 DIA 3
7 3H.905.02.0.00 CLIP 25 DIA FOR FLEXIBLE PIPE 1
RUBBER SLEEVE FOR
8 3H.905.05.0.00 2
TEMP.SWITCH / SENSOR
9 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 2
10 50.003.08.016. SET SCREW - M8X1.25X16 - 8.8 2
11 50.006.08.000. NUT- M8X1.25 - GR.8 2
12 50.003.12.020. SET SCREW - M12X1.75X20 - 8.8 1
13 50.548.12.000. SPL. PLAIN WASHER - M12 1

41
TITLE: -ENGINE WIRING HARNESS FOR 6K
GROUP: - 6H.1009.1
WITH KG 545 & SEDEMAC GOVERNOR

D4
W.T. SENSOR
D5
ACTUATOR

L
NE
PA
SID NTR 1
LOP

OL
D
D7
VOLTAGE
CO

E
SUPPRESSOR
D6 ST D
MAGNETIC AR 3
TE
PICK UP R
D8
ENGINE
CONTROL UNIT

OR
AT
TE D2
RN
3 8

AL
4 5
6
10
14
9 11 12
7
2
13

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

RUBBER SLEEVE 38X10 FOR PR
14 46.252.02.0.00 1
GAUGE SENDOR

42
TITLE: - EXHAUST MANIFOLD (6K ENGINES) GROUP: - 6H.011.3

8
3
9
7

1
6

2
3
4
5 1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.011.04.0.00 EXHAUST MANIFOLD 2
2 6H.011.05.0.00 EXHAUST MANIFOLD 1
3 F6.168.02.0.00 R RINGS (DIN 70910-65X2.5) 6
4 4H.107.02.0.00 SPACER (FOR EXT.MANIFOLD) 12
SOCKET HEAD SCREW -
5 50.011.08.075. 12
M8X1.25X75 - 8.8
S.S. JOINT FOR EXHAUST
6 P2.106.01.0.00 6
MANIFOLD
7 50.054.08.025. STUD-M8X25-10.9 4
8 50.080.08.000. NUT (SS) - M8x1.25 4
9 50.506.08.000. PLAIN MACHINED WASHER - M8 4

43
TITLE: - EXPANSION BELLOW
GROUP: - F6.550
(4") AND MOUNTING

2
3

5 1

3
5

4 5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

EXPANSION BELLOW 4"
1 F6.550.01.0.00 1
(WITH 4 MTG. HOLE)
2 F6.503.02.0.00 S.S.JOINT(4") 2
3 50.003.14.040. SET SCREW - M14X2X40 - 8.8 8
4 50.006.14.000. NUT - M14X2 - GR.8.8 8
5 50.506.14.000. PLAIN MACHINED WASHER - M14 16

44
TITLE: - F.I.P FOR 6K1080 TA (160 KVA) GROUP: - 6H.100

1 17 20
7
10 18
16
9
18
19
8 12

2 14
5 15

4
3

6 10 13

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FUEL INJECTION PUMP FOR
1 6H.100.10.0.00 6K1080 TA (160 KVA) MICO No. 1
F002 A0Z 847
2 34.016.21.0.00 JOINT FOR FUEL PUMP 1
L.O.SUPPLY HOSE (FIP)
3 4H.006.01.0.00 1
M10 BANJO ENDS X 235 L
SPECIAL BANJO BOLT
4 03.660.07.0.00 2
(L.O.SUPPLY TO PUMP)
5 50.508.07.000. COPPER WASHER (10X14) 4
BANJO BOLT WITH STRAINER
6 34.016.15.0.00 1
(2 443 456 900)
7 50.504.04.000. BANJO BOLT - M14X1.5 2
8 10.027.02.0.00 LEAD SEAL (5945010300) 1
9 10.027.03.0.00 SEALING WIRE (5945010600) 1
10 50.508.12.000. COPPER WASHER (14X20) 6
CONSISTING
ASSEMBLY FOR ENGINE
*11 4H.122.30.0.00 1 OF SR. NO. 12
SPEED ARRANGEMENT TO 20

45
TITLE: - F.I.P FOR 6K1080 TA (160 KVA) GROUP: - 6H.100

1 17 20
7
10 18
16
9
18
19
8 12

2 14
5 15

4
3

6 10 13

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

BRACKET FOR SPEED
12 4H.122.01.0.00 1
ADJUSTMENT
O RING - DIPSTICK
13 03.036.01.0.00 2
(2X5,21515 OR 21511)
14 50.506.06.000. PLAIN MACHINED WASHER - M6 2
15 50.003.06.015. SET SCREW - M6X1X15 - 8.8 2
16 4H.122.02.0.00 BAR FOR SPEED ADJUSTMENT 1
17 50.548.06.000. WASHER 1
18 03.065.04.0.00 KNURLED NUT 2
19 03.065.05.0.00 SPHERICAL WASHER 2
20 50.036.03.001. SPLIT COTTER PIN - 1/16"X1/2" 2

46
TITLE: - FLYWHEEL ASSEMBLY-PG GROUP: - 03.050.1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 03.050.20.0.00 FLYWHEEL ASSEMBLY 1 OF SR. NO.
2&3
NOT SUPPLIED
2 03.050.11.0.00 FLYWHEEL ( MACHINING ) 1 LOOSE
STARTER RING 121 TEETH,
3 03.035.02.0.00 1
3.175 MODULE
BOLT FOR FLYWHEEL
4 04.024.02.0.00 10
(M10X45 LONG)

47
TITLE: - FLYWHEEL HOUSING (SAE 2)
WITHOUT STARTER FLANGE S/F GROUP: -3H.085.2
MICO STARTER 6H.675

5
1

6
7

10
11

9
4
8
2
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FLYWHEEL HOUSING SAE-2 144.5
1 3H.085.01.0.00 WIDTH & S/F CLOSE COUPLED 1
GENSET
2 50.003.10.035. SET SCREW - M10X1.5X35 - 8.8 8
3 65.061.15.0.00 HARD WASHER 8
4 4H.001.13.0.00 HOLLOW DOWEL (16 DIA) 2
BLANKING PLATE FOR FLYWHEEL
5 4H.038.08.0.00 1
HOUSING
6 50.003.06.012. SET SCREW - M6X1X12 - 8.8 2
7 50.506.06.000. PLAIN MACHINED WASHER - M6 2
8 50.602.16.000. CORE PLUG 16X1.5 1
9 50.508.15.000. COPPER WASHER (17X23) 1
10 50.602.18.000. CORE PLUG 1
11 50.508.17.000. COPPER WASHER (18X24) 1

48
TITLE: - FRONT COVER SF VISCOUS
GROUP: - 6H.229.4
DAMPER, HYD PUMP BORE

6
5 1
11

3
2

6
6 7
13

10
15
6
14 6 4
6
16 12 9 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.229.01.0.00 FRONT COVER 1
COVER PLATE FOR FRONT COVER,
2 3H.039.04.0.00 1
COMPRESSOR MOUNTING
JOINT FOR COVER PLATE(FOR
3 3H.039.05.0.00 FRONT COVER,COMPRESSOR 1
MOUNTING)
4 50.002.08.080. SET BOLT - M8X1.25X80 - 8.8 2
5 50.002.08.065. SET BOLT - M8X1.25X65 - 8.8 2
6 50.506.08.000. PLAIN MACHINED WASHER - M8 21
7 50.002.08.030. SET BOLT - M8X1.25X30 - 8.8 2
8 50.002.08.040. SET BOLT - M8X1.25X40 - 8.8 2
9 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 5
10 50.003.08.035. SET SCREW - M8X1.25X35 - 8.8 5
11 50.010.08.020. STUD - M8X1.25X20 - 8.8 3
12 4H.358.06.0.00 GEAR END OIL SEAL (80X105X12) 1
13 6H.229.03.0.00 TIMING POINTER 1
14 50.003.06.012. SET SCREW - M6X1X12 - 8.8 2
15 50.506.06.000. PLAIN MACHINED WASHER - M6 2

49
TITLE: - FRONT COVER SF VISCOUS
GROUP: - 6H.229.4
DAMPER, HYD PUMP BORE

6
5 1
11

3
2

6
6 7
13

10
15
6
14 6 4
6
16 12 9 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

16 4H.358.12.0.00 OIL DEFLECTOR PLATE 1

50
TITLE: - FUEL LEVEL SENSOR SUITABLE FOR
GROUP: - 6H.192.1
170MM FUEL TANK HEIGHT

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

LFL SENSOR ( LOW FUEL LEVEL )
1 6H.192.14.0.00 1
165 MM HIGHT
2 50.003.05.020. SET SCREW - M5X0.8X20 - 8.8 6

51
TITLE: - FUEL PIPES FOR 6K GROUP: - 4H.899.5

2 3

1 4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FUEL PIPE ( S/F 04.1221 -
1 04.613.01.0.00 1
GREAVES)1400 L, 9.5 ID, 14 BANJO
FUEL PIPE (RETURN) M12 X 1.5
2 06.5001.21.0.00 MALE PLUG X M14 X 1.5 BANJO 1
(900
3 50.504.04.000. BANJO BOLT - M14X1.5 2
4 50.508.12.000. COPPER WASHER (14X20) 4

52
TITLE: - FUEL PUMP GEAR GROUP: - 2H.011

4 2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 2H.011.01.0.00 FUEL PUMP GEAR(FINISH) 1
HUB FOR FUEL PUMP
2 2H.011.02.0.00 1
GEAR(FINISH)
3 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 3
4 34.017.05.0.00 WASHER FOR FUEL PUMP GEAR. 3

53
TITLE: - GAS OUTLET MANIFOLD
GROUP: - 6H.027
(K26-TURBO)

4
1
5

6
3
7
3
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

BRACKET FOR GAS OUTLET
1 6H.027.01.0.00 1
MANIFOLD
2 6H.027.03.0.00 COPPER COATED BOLT(M10X025) 4
3 50.506.10.000. PLAIN MACHINED WASHER - M10 8
4 6H.027.02.0.00 GAS OUTLET MANIFOLD 1
5 F6.560.01.0.00 COMPRESSION RING 2
STUD M10X1.5X025
6 F6.377.12.0.00 4
(COPPER COATED)
STAINLESS STEEL NUT
7 50.080.10.000. 4
M10-AISI-304

54
TITLE: - GEAR CASING FOR (6K1080 TA) GROUP: - 6H.311.1

2
3

5
4

10

1
9
7
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.1013.01.0.00 GEAR CASING FOR 6K1080 1
2 6H.225.02.0.00 JOINT FOR GEAR CASING 1
PRECOATED STUD
3 03.001.12.0.00 4
(FOR FUEL PUMP MOUNTING)
4 03.001.25.0.00 WASHER (FOR FUEL PUMP MTG) 4
5 50.006.10.000. NUT - M10X1.5 - GR.8 4
6 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 8
7 50.506.08.000. PLAIN MACHINED WASHER - M8 14
8 34.001.23.0.00 DOWEL FOR GEAR CASING 2
9 50.002.08.065. SET BOLT - M8X1.25X65 - 8.8 2
10 50.002.08.080. SET BOLT - M8X1.25X80 - 8.8 2

55
TITLE: - HIGH PRESSURE PIPE (700MM) GROUP: - 6H.009

7
8
9
10 5
11
12
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.009.70.0.00 H.P. PIPE--COMPLETE SET 1
SR. NO. 7 TO 12
2 50.541.02.000. PIPE CLIP. (FOR 3 PIPES) 2
3 50.541.03.000. PIPE CLIP (FOR 4 PIPES) 2
4 02.036.03.0.00 RUBBER SLEEVE 14
5 50.003.06.012. SET SCREW - M6X1X12 - 8.8 4
6 50.006.06.000. NUT - M6X1 - GR.8 4
7 6H.009.10.0.00 H.P. PIPE ASSLY. (CYL. NO.1) 1
8 6H.009.20.0.00 H.P. PIPE ASSLY. (CYL. NO.2) 1
9 6H.009.30.0.00 H.P. PIPE ASSLY. (CYL. NO.3) 1
10 6H.009.40.0.00 H.P. PIPE ASSLY. (CYL. NO.4) 1
11 6H.009.50.0.00 H.P. PIPE ASSLY. (CYL. NO.5) 1
12 6H.009.60.0.00 H.P. PIPE ASSLY. (CYL. NO.6) 1

56
TITLE: - HOSES FOR 6H.413.10.0.00
GROUP: - 6H.413.3
AIR CLENAER ASSEMBLY (6K)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.949.02.0.00 HOSE FOR AIR CLEANER 1
T-BOLT CLAMP JUPITER JT6A20
2 6H.680.01.0.00 1
(117 - 125 DIA RANGE)
T BOLT CLAMP KLIPCO TB108 /
3 06.376.04.0.00 1
JUPITOR (108 TO 116 DIA)

57
TITLE: - HOUSING FOR EXHAUST OUTLET
GROUP: - 6H.026
(K26 TURBO)

4
5

2
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.026.01.0.00 HOUSING FOR EXHAUST OUTLET 1
2 6H.026.02.0.00 SS JOINT FOR TURBO OUTLET 1
3 50.010.08.025 STUD - M8X1.25X25 - 8.8 4
4 50.080.08.000 STAINLESS STEEL NUT 4
5 50.506.08.000 PLAIN MACHINED WASHER - M8 4

58
TITLE: - INJECTOR (S-TYPE) - MICO GROUP: - 6H.101

3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

INJECTOR S-TYPE
1 4H.1319.01.0.00 (5X0.284X150X13, 950 HTF; NHA 1
NO. E043 2252 00)
2 10.029.07.0.00 WASHER FOR INJ. (2439999032) 1
3 2H.023.01.0.00 INJECTOR YOKE. 1
4 02.035.08.0.00 BUSH FOR INJECTOR 1
5 3H.009.11.0.00 O RING FOR NOZZLE 1

59
TITLE: - INTERMEDIATE GEAR SUPPORT
GROUP: - 6H.293
(W/O AUTO TIMER)

7 6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ASSLY OF INTERMEDIATE
*1 2H.038.10.0.00 1 OF SR. NO.-
GEAR & BUSH 2 AND 3
NOT SUPPLIED
2 2H.038.03.0.00 INTERMEDIATE GEAR (FINISH) 1 LOOSE
BUSH FOR INTERMEDIATE
3 2H.004.02.9.00 1
GEAR(S/F)
INTERMEDIATE GEAR SUPPORT
4 6H.267.01.0.00 1
S/F AUTO TIMER
5 2H.038.02.0.00 THRUST WASHER 1
RETAINING PLATE FOR INT. GEAR
6 6H.293.01.0.00 1
SUPPORT W/O/AUTOTIMER
7 50.002.08.070 SET BOLT - M8X1.25X70 - 8.8 3

60
TITLE: - K LUB OIL GROUP: - 4H.559.1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

NOT
*1 82.110.15.1.00 K OIL SUPER 15 W 40 CF4 1
ILLUSTRATED

61
TITLE: - KIT GROUP GROUP: - 6H.415.1

5
4
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 50.003.14.030. SET SCREW - M14X2X30 - 8.8 2
2 50.506.14.000. PLAIN MACHINED WASHER - M14 2
3 50.003.10.030. SET SCREW - M10X1.5X30 - 8.8 4
4 50.548.10.000. SPECIAL PLAIN WASHER - M10 8
5 50.006.10.000. NUT - M10X1.5 - GR.8.8 4

62
TITLE: - KIT GROUP (S/F 6K -140 & 160 KVA
GROUP: - 6H.936.5
CANOPY GENSET)

1
36 2
4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 06.597.88.0.00 LEFT HAND HINGE 4
LEFT HAND LOCK WITH CATCHER
2 6H.623.30.0.00 2
FOR 50MM THK FOAM CANOPY
3 06.598.06.0.00 RIGHT HAND HINGE 4
RIGHT HAND LOCK WITH
4 6H.623.25.0.00 CATCHER FOR 50MM THK 2
FOAM CANOPY
SET OF STICKERS FOR WATER CONSISTING
*5 2H.181.20.0.00 COOLED ENGINES (ABOVE 30 KVA 1 OF SR. NO.
- 4R/6R/6K ) 6 TO 35
6 2H.075.18.0.00 KGPI LOGO FOR CANOPY "B" 3
7 2H.075.14.0.00 KGPI LOGO GREEN BAND 2
8 2H.181.03.0.00 HOT AIR (STICKER WORD) 1
9 2H.181.04.0.00 FLU GAS (STICKER WORD) 1
ELECTRICAL SHOCK
10 2H.181.05.0.00 1
(STICKER WORD)
STICKER FOR "ROUTINE
11 2H.181.06.0.00 1
CHECK POINT"

63
TITLE: - KIT GROUP (S/F 6K -140 & 160 KVA
GROUP: - 6H.936.5
CANOPY GENSET)

6 8 9 10 11

TM

KIRLOSKAR
GREEN
POWER IDEAS

12 13 14 15 16

17 18 19 20

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

12 2H.181.07.0.00 STICKER FOR "LIFTING HOOK" 4
13 2H.181.08.0.00 STICKER FOR "COOLANT DRAIN" 1
14 2H.181.09.0.00 STICKER FOR "BREATHER" 1
15 2H.181.11.0.00 STICKER FOR "DIESEL FILLING" 1
16 2H.181.12.0.00 STICKER FOR "DO'S AND DON'TS" 1
17 2H.181.13.0.00 STICKER FOR "FRESH AIR" 1
18 2H.181.15.0.00 STICKER FOR "CABLE ENTRY" 1
19 2H.181.17.0.00 STICKER FOR "DO NOT FIRE" 1
20 2H.181.18.0.00 STICKER FOR "SPECIFIC GRAVITY" 1
21 2H.181.19.0.00 STICKER FOR "COOLANT FILL" 1
22 2H.181.22.0.00 FUEL SUCTION ( STICKER WORD ) 1
23 2H.181.23.0.00 FUEL RETURN ( STICKER WORD ) 1
STICKER FOR LIFTING
24 2H.181.24.0.00 1
INSTRUCTION
STICKER FOR LIFTING
25 2H.181.25.0.00 1
INSTRUCTION
26 38.065.04.0.00 STICKER FOR "EMERGENCY STOP'' 1
27 38.065.05.0.00 STICKER FOR "DIESEL DRAIN'' 1

64
TITLE: - KIT GROUP (S/F 6K -140 & 160 KVA
GROUP: - 6H.936.5
CANOPY GENSET)

21 22 23 24 25

! !

26 27 28 29

30 31 32 33

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

28 38.065.06.0.00 STICKER FOR "DIESEL'' 1
29 38.065.08.0.00 STICKER FOR “LUB OIL DRAIN’’ 1
30 38.065.09.0.00 STICKER FOR “WATER DRAIN’’ 1
31 38.065.13.0.00 STICKER FOR “EARTHING” 1
32 38.065.70.0.00 STICKER FOR “BATTERY” 1
33 38.065.71.0.00 WARNING STICKER 1
NOT
*34 38.065.74.0.00 DANGER STICKER 1
ILLUSTRATED
NOT
*35 2H.075.08.0.00 TOLL FREE STICKER 1
ILLUSTRATED
RAD WATER FILL CAP WITH
36 3H.408.31.0.00 1
RUBBER SEAL FOR CANOPY

65
TITLE: - KIT GROUP FOR CC GENSET. GROUP: - 02.511.11

1 3

2 2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 50.003.10.040. SET SCREW - M10X1.5X40 - 8.8 12
HARD WASHER
2 02.438.23.0.00 20
(11 I.D. X 19 O.D. X 1.5 TH )
3 50.003.10.025. SET SCREW - M10X1.5X25 - 8.8 8

66
TITLE: - LIFTING HOOK GROUP: - 6H.048

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.048.01.0.00 LIFTING HOOK 2
2 50.002.10.030. SET BOLT - M10X1.5X30 - 8.8 4
3 50.506.10.000. PLAIN MACHINED WASHER - M10 4

67
TITLE: - LINKAGE FOR ELECTRONIC
GROUP: - 6H.245.3
GOVERNOR

11
12 10
4

5
3
10
11 9
2
8
10
13

8
10

7
10
6
11
3
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
LINKAGE ASSEMBLY FOR
*1 6H.245.30.0.00 1 OF SR. NO.
ELECTRONIC GOVERNOR 2 TO 12
2 4H.472.13.0.00 SPACER FOR LINKAGE 1
3 06.072.03.0.00 SPACER (BAR) FOR ACTUATOR 2
4 4H.472.07.0.00 LEVER FOR ELE.ACTUATOR 1
5 29.224.28.0.00 R.E.BEARING M6 RH THREADS 2
6 50.003.06.040. SET SCREW - M6X1X40 - 8.8 1
7 50.506.06.000. PLAIN MACHINED WASHER - M6 1
8 50.006.06.000. NUT - M6X1 - GR.8 2
9 50.003.06.050. SET SCREW - M6X1X50 - 8.8 1
10 50.505.06.000. SPRING WASHER - M6 5
11 50.037.06.000. SELF LOCKING NYLOC NUT - M6 3
12 50.003.06.025. SET SCREW - M6X1X25 - 8.8 1
13 6H.245.05.0.PR STUD (45 MM LONG) 1

68
TITLE: - LUB OIL COOLER AND FILTER
GROUP: - 6H.113...EXP
(FOR JACKET WATER HEATING)

4
3 15

9
10

5
17
14
11
19 8
7

17

16

13
12
6 18

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.113.30.0.00 LUBE OIL COOLER ASSEMBLY 1 OF SR. NO.
2 & 11 TO 17
CONSISTING
*2 6H.113.20.0.00 HEADER AND COOLER ASSEMBLY 1 OF SR. NO.
3 TO 10
HEADER FOR LUB OIL COOLER
3 6H.113.01.0.00 AND FILTER ( S/F JACKET WATER 1
HEATER)
4 F6.358.01.0.00 PLATE TYPE LUB OIL COOLER 1
5 F6.036.11.0.00 JOINT FOR LUB OIL COOLER 1
6 50.011.10.040. CAP SCREW 4
7 3H.007.05.0.00 ADAPTOR FOR SPIN ON FILTER 2
8 50.056.08.000. HEADLESS PIPE PLUG 1"-11.5 NPTF 1
CORE PLUG HEXAGONAL
9 50.610.22.000. 1
SOCKET HEAD(M22x1.5)
10 50.508.23.000. COPPER WASHER (22X27) 1
11 6H.014.11.0.00 JOINT FOR HEADER 1

69
TITLE: - LUB OIL COOLER AND FILTER
GROUP: - 6H.113...EXP
(FOR JACKET WATER HEATING)

4
3 15

9
10

5
17
14
11
19 8
7

17

16

13
12
6 18

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

PRECOATED PLUG
12 34.001.35.0.00 1
(FOR OIL GALLERY)
13 50.508.08.000. COPPER WASHER (10X16) 1
14 50.002.08.060. SET BOLT - M8X1.25X60 - 8.8 2
15 50.002.08.090. SET BOLT - M8X1.25X90 - 8.8 4
16 50.002.08.110. SET BOLT - M8X1.25X110 - 8.8 8
17 50.506.08.000. PLAIN MACHINED WASHER - M8 14
SPIN ON FILTER FOR
18 06.436.01.0.00 2
LUBRICATING OIL
HEADLESS PIPE PLUG
19 50.056.07.000. 1
(NPTF 14-3/4")

70
TITLE: - LUB OIL PUMP FOR 6K 1080 TA (160
GROUP: - 6H.985
KVA)

11 23 24
20
10
9
21
12
24

22
8
4
6 16 18

14
5 17
15

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
LUB OIL PUMP ASSEMBLY WITH
*1 6H.985.40.0.00 1 OF SR. NO.
INTERMEDIATE GEAR 2 , 17 TO 19
CONSISTING
*2 6H.985.30.0.00 LUB OIL PUMP ASSEMBLY 1 OF SR. NO.3,13
& 16
CONSISTING
LUB OIL PUMP ASSEMBLY
*3 6H.985.90.0.00 1 OF SR. NO.
WITHOUT ROTORS 4 TO 12
SUB ASSEMBLY OF LOP BODY
4 6H.985.20.0.00 1
AND BUSH
COUNTER SUNK SOCKET HEAD
5 06.010.01.0.00 3
SCREW.
NOT SUPPLIED
6 6H.985.05.0.00 COVER PLATE 1 LOOSE
7 6H.985.06.0.00 O RING 1
LUB.OIL PUMP DRIVING
8 3H.005.04.0.00 1
GEAR(FINISH)
9 03.010.13.0.00 RELIEF VALVE 1
10 03.010.14.0.00 SPRING FOR RELIEF VALVE 1

71
TITLE: - LUB OIL PUMP FOR 6K 1080 TA (160
GROUP: - 6H.985
KVA)

11 23 24
20
10
9
21
12
24

22
8
4
6 16 18

14
5 17
15

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

11 03.010.15.0.00 CUP FOR SPRING 1
12 50.036.07.010. SPLIT COTTER PIN - 1/8"X1-1/2" 1
CONSISTING
*13 6H.985.10.0.00 ROTOR SUB ASSEMBLY 1 OF SR. NO.
14 & 15
NOT SUPPLIED
14 6H.985.02.0.00 SHAFT FOR INNER ROTOR 1
LOOSE
NOT SUPPLIED
15 6H.985.03.0.00 INNER ROTOR 1
LOOSE
NOT SUPPLIED
16 6H.985.04.0.00 OUTER ROTOR 1
LOOSE
SHAFT FOR LOP INTERMEDIATE NOT SUPPLIED
17 6H.985.07.0.00 1
GEAR LOOSE
18 4H.372.02.0.00 HARD WASHER ( FOR INT. GEAR) 1
CONSISTING
SUB.ASSLY.OF L.O.PUMP INT.GEAR
*19 3H.005.30.0.00 1 OF SR. NO
AND BUSH.
20 & 21
INTERMEDIATE GEAR(FOR
20 3H.005.03.0.00 1
L.O.PUMP)(FINISH)
21 34.014.12.0.00 BUSH FOR LEVER 1

72
TITLE: - LUB OIL PUMP FOR 6K 1080 TA (160
GROUP: - 6H.985
KVA)

11 23 24
20
10
9
21
12
24

22
8
4
6 16 18

14
5 17
15

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

22 50.002.08.075. SET BOLT - M8X1.25X75 - 8.8 1
23 50.002.08.035. SET BOLT - M8X1.25X35 - 8.8 2
24 50.506.08.000. PLAIN MACHINED WASHER - M8 3

73
TITLE: - LUB OIL SUMP (6K ENGINE) GROUP: - 6H.378.1

4
7
5
6 9

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

LUB OIL SUMP ASSEMBLY CONSISTING
*1 6H.378.10.0.00 1
(SHALLOW) OF SR. NO. 2,3
2 6H.378.01.0.00 LUB OIL SUMP (SHALLOW) 1
CONSISTING
*3 2H.035.20.0.00 PLUG WITH MAGNET & 'O'RING. 2 OF SR. NO. 4,5
4 2H.035.10.0.00 DRAIN PLUG ASSEMBLY. 2
5 F6.024.47.0.00 O - RING FOR DRAIN PLUG 2
SOCKET HEAD SCREW -
6 50.011.08.030. 27
M8X1.25X30 - 8.8
7 10.020.03.0.00 HARD WASHER (F) 27
8 6H.378.20.0.00 DIPSTICK ASSEMBLY 1
O RING - DIPSTICK
9 03.036.01.0.00 1
(2X5,21515 OR 21511)

74
TITLE: - LUBE OIL PRESSURE SENDOR,
(SENSOR + SWITCH), VDO SIEMENCE
GROUP: - 2H.092.6
(INDIA), 2 TERMINAL, BODY GROUND
WITH IMPORTED BOBBIN ASSEMBLY

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

LUBE OIL PRESSURE SENDOR,
(SENSOR + SWITCH), VDO
1 2H.092.11.0.00 SIEMENCE (INDIA), 2 TERMINAL, 1
BODY GROUND WITH IMPORTED
BOBBIN ASSEMBLY

75
TITLE: - MAGNETIC PICK UP 16X1.5
THREADING (UNITCH MAKE) FOR 250 GROUP: - F6.741.16
KVA WITH 110 SERIES MSSL CON.

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

MAGNETIC PICK UP 16X1.5
THREADING (UNITCH MAKE) FOR
1 F6.741.16.0.00 1
250 KVA WITH 110 SERIES MSSL
CON.

76
TITLE: - MATTING FLANGES FOR 6R/6K1080
GROUP: - 6H.352.2
CPCB ENGINES (100 TO 160 KVA)

5
4

6 4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FLANGE (AT SILENCER INLET AND
1 6H.352.03.0.00 OUTLET) FOR 6R1080T AND 2
6R1080TA SILENT SET
2 6H.352.02.0.00 JOINT FOR EXHAUST SILENCER 2
3 50.003.16.050. SET SCREW - M16X2X50 - 8.8 16
4 50.506.16.000. PLAIN MACHINED WASHER - M16 32
5 50.006.16.000. NUT - M16X2 - GR.8.8 16
6 F6.503.04.0.00 FLANGE(4" ID) 1

77
TITLE: - MOUNTING FOOT FOR 6K1080
GROUP: - 6H.327.1
ENGINES

2
1

4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ENGINE MOUNTING FOOT (GEAR
1 6H.487.01.0.00 END SIDE) FOR 6R1080 GAS 2
GENSET
CRANK CASE FOOT ( F.W.E )
2 6H.327.01.0.00 2
FOR PACKING PURPOSE
3 50.002.14.045. SET BOLT - M14X2X45 - 8.8 8
4 50.505.14.000. SPRING WASHER - M14 12
5 50.003.14.035. SET SCREW - M14X2X35 - 8.8 4

78
TITLE: - MOUNTING FOR 30" PLASTIC FAN
GROUP: - 6H.1171.2
WITH POLY V BELT 7PK

11

13
10
3 12
10
5
6
14

10
11

9 8
15 2
7
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
SUB ASSEMBLY OF BEARING
*1 6H.031.10.0.00 1 OF SR. NO. 2
HOUSING TO 7
2 6H.031.02.0.00 HOUSING FOR SHAFT (FINISH) 1
3 6H.031.04.0.00 SHAFT FOR FAN PULLEY 1
BALL BEARING
4 F6.017.21.0.00 1
(DIN 625-6306-2RS1)
BALL BEARING
5 F6.017.22.0.00 1
(DIN 625 6305-2RS1)
6 50.502.72.000. CIRCLIP INTERNAL - 72 MM 1
7 50.501.25.000. CIRCLIP EXTERNAL - 25 MM 1
8 6H.031.01.0.00 BRACKET (FINISH) 1
9 50.010.10.025. STUD - M10X1.5X25 - 8.8 3
10 50.506.10.000. PLAIN MACHINED WASHER - M10 7
11 50.006.10.000. NUT - M10X1.5 - GR.8.8 4
SOCKET HEAD SCREW -
12 50.011.10.050. 4
M10X1.5X50 - 8.8
13 50.010.10.060. STUD - M10X1.5X60 - 8.8 1

79
TITLE: - MOUNTING FOR 30" PLASTIC FAN
GROUP: - 6H.1171.2
WITH POLY V BELT 7PK

11

13
10
3 12
10
5
6
14

10
11

9 8
15 2
7
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FAN DRIVE PULLEY
14 6H.1130.02.0.00 1
(POLY V SECTION ,140 PCD)
SET SCREW
15 50.051.12.050. 1
M12 X 1.75 X 50 L 10.9 G

80
TITLE:-MOUNTING FOR SPIN ON FUEL FILTER
GROUP: - 6H.081.2
& PIPING ON INLET MANIFOLD

3 6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 50.003.12.035. SET SCREW - M12X1.75X35 - 8.8 4
2 50.505.12.000. SPRING WASHER - M12 4
3 50.506.12.000. PLAIN MACHINED WASHER - M12 4
PLATE FOR FUEL FILTER MTG.
4 6H.081.04.0.00 1
FOR 6RT & 6RTA INTERNACO
FUEL PIPE (FUEL FILTER TO FUEL
5 6H.081.02.0.00 1
PUMP)
FUEL PIPE (FEED PUMP TO FUEL
6 6H.081.03.0.00 1
FILTER)

81
TITLE: - MOUNTING OF B12 E GOVERNOR GROUP: - 6H.245.2

14
13 16
15

3
2 10
12
6

8
7
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ELECTRONIC GOVERNOR AND
1 6H.1008.02.0.PR ACTUATOR MOUNTING BRACKET 1
FOR 6K1080TA ENGINE
2 50.003.10.030. SET SCREW - M10X1.5X30 - 8.8 2
3 50.506.10.000. PLAIN MACHINED WASHER - M10 2
CONSISTING OF
*4 4H.472.70.0.00 ECU ASSEMBLY 1 SR. NO.
5 TO 10
ECU FOR SEDEMAC MAKE
5 6H.1003.02.0.PR 1
ELECTRONIC GOVERNOR B12
VOLTAGE SUPPRESSOR FOR
6 4H.472.15.0.PR 1
SEDEMAC B12 ECU
SOCKET HEAD SCREW - M6X1X16 -
7 50.011.06.016. 4
8.8
8 50.505.06.000. SPRING WASHER - M6 4
9 50.006.06.000. NUT - M6X1 - GR.8 4
10 50.506.06.000. PLAIN MACHINED WASHER - M6 4
CONSISTING OF
*11 4H.472.60.0.00 ACTUATOR ASSEMBLY 1 SR. NO.
12 TO 16

82
TITLE: - MOUNTING OF B12 E GOVERNOR GROUP: - 6H.245.2

14
13 16
15

3
2 10
12
6

8
7
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

12 6H.1003.01.0.00 ACTUATOR SEDEMAC MAKE 1
SOCKET HEAD SCREW - M6X1X16 -
13 50.011.06.016. 4
8.8
14 50.505.06.000. SPRING WASHER - M6 4
15 50.506.06.000. PLAIN MACHINED WASHER - M6 4
16 50.006.06.000. NUT - M6X1 - GR.8 4

83
TITLE: - OIL FILLING BODY GROUP: - 3H.042

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 3H.042.01.0.00 OIL FILLING BODY 57 MM HEIGHT 1
JOINT FOR OIL FILLING BODY
2 3H.042.03.0.00 1
(ARMSTRONG TS13)
SOCKET HEAD SCREW -
3 50.011.08.025. 2
M8X1.25X25 - 8.8
4 50.506.08.000. PLAIN MACHINED WASHER - M8 2
5 34.036.50.0.00 PERFORATED DISC. 1
6 34.036.60.0.00 CAP ASSLY 1

84
TITLE: - OIL SEAL HOUSING (ALUMINIUM) GROUP: - 6H.045.4

6
5

3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

PLATE WITH RUBBER MOULDING
1 2H.039.10.0.00 1
(FOR FWE OIL SEAL HSG.)
SUB-ASSLY OF OIL SEAL HOUSING CONSISTING
*2 6H.045.30.0.00 1
F.W.E. OF SR. NO. 3, 4
3 6H.045.01.0.00 OIL SEAL HOUSING (FWE) FINISH 1
4 03.007.06.0.00 OIL SEAL(115X140X12) CR MAKE 1
5 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 10
6 50.506.08.000. PLAIN MACHINED WASHER - M8 10

85
TITLE: - PISTON FOR 6K1080 TA (160 KVA) GROUP: - 6H.247.1

8 4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.247.40.0.00 PISTON ASSEMBLY 1 OF SR. NO
2 TO 4
PISTONS 105 DIA FOR 6K1080 TA
NOT SUPPLIED
2 6H.247.07.0.00 (SPR MAKE, SUPPLIER DWG NO RD 1
LOOSE
PT OT H-92 )
PISTON PIN 42.1 MM DIA FOR
3 6H.247.14.0.00 6K1080TA ( SPE MAKE SUPPLIER 1
DWG NO:RD/PN/OT-K07)
4 50.502.42.000. CIRCLIP INTERNAL - 42 MM 2
CONSISTING
*5 6H.247.30.0.00 SET OF PISTON RINGS 1 OF SR. NO
6 TO 8
KEYSTONE RING 105 DIA FOR
NOT SUPPLIED
6 6H.247.11.0.00 6K1080TA ( SPR MAKE , SUPPLIER 1
LOOSE
DWG NO RD/RG-1/OT-J04)
TAPER COMPRESSION RING 105 DIA
NOT SUPPLIED
7 6H.247.12.0.00 FOR 6K1080TA ( SPR MAKE DWG 1 LOOSE
NO:RD/RG-2/OT-J04)
CHROME CONFIRMABLE OIL
CONTROL RING 105 DIA FOR NOT SUPPLIED
8 6H.247.13.0.00 1
6K1080TA ( SPR MAKE SUPPLIER DWH LOOSE
NO: RD/RG-03/OT-J04)

86
TITLE: - POLY V BELT GROUP: - 4H.1493.2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

POLY V BELT (FENNER,
1 4H.1493.01.0.00 1
6PK-1190) PG
POLY V BELT FOR 6R1080T/TA
2 6H.1171.01.0.00 1
(7PK BELT)

87
TITLE: - PUSHROD & TAPPETS GROUP: - 2H.007

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 02.024.70.0.00 PUSH ROD (WELDED) 2
2 02.024.01.0.00 VALVE TAPPET 2

88
TITLE: - RADIATOR CONNECTIONS LOOSE GROUP: - 6H.477.8

1
3
3
6

2
5

7
3

1
6 3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

HOSE (PIPE TO WATER PUMP)
1 4H.073.02.0.00 2
(45X45X80L)
RADIATOR INLET PIPE
2 6H.477.14.0.00 1
(THERMOSTAT TO RADIATOR)
3 30.650.04.0.00 HOSE CLIP (S.S.60 DIA.) 5
RADIATOR OUTLWT HOSE
4 6H.477.15.0.00 1
(RADIATOR TO PUMP INLET)
MAKE UP HOSE FOR 6K1080TA
5 6H.172.28.0.00 1
WITH 1000 CORE RADIATOR
WORM DRIVE CLAMP
6 2H.112.02.0.00 2
( JUPITOR JW7B13, 29 TO 45 DIA)
7 30.650.02.0.00 HOSE CLIP (S.S.70 DIA.) 1

89
TITLE: - RADIATOR FAN & MTG. GROUP: - F6.375.1

3
4

3
4
1
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

PLASTIC FAN 30" (BORG WARNER
1 F6.375.25.0.00 1
PART NO 4735-35828-K1)
FAN ADAPTOR FOR 30" PLASTIC
2 6H.360.01.0.00 1
FAN FOR 6R1080 TA SILENT SET
3 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 12
4 50.506.08.000. PLAIN MACHINED WASHER - M8 12

90
TITLE: - RADIATOR MTG. ON BASE FRAME GROUP: - 6H.477.7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ANTI VIBRATION MOUNTS
1 F6.509.04.0.00 4
(POLYBOND:PO 312)
2 50.003.10.016. SET SCREW - M10X1.5X16 - 8.8 4
3 50.506.10.000. PLAIN MACHINED WASHER - M10 4

91
TITLE: - RADIATOR STAY GROUP: - 6H.019.3

6
3
1
5
3
4 4
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.019.01.0.00 PLATE FOR STAY 1
2 6H.477.13.0.00 STAY FOR 6K RADIATOR 2
3 6H.019.06.0.00 RUBBER BUSH 8
4 6H.019.07.0.00 BUSH STEEL 8
5 6H.019.08.0.00 SPECIAL WASHER 8
6 50.006.12.000. NUT - M12X1.75 - GR.8.8 8

92
TITLE: - RAIN CAP ASSEMBLY FOR EXHAUST
GROUP: - 4H.446.50
BEND

4
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.446.14.0.00 RAIN CAP 1
2 4H.446.15.0.00 RAIN CAP CLAMP 1
3 3H.160.16.0.PR PIN 1
4 50.006.06.000. NUT - M6X1 - GR.8 2
5 50.002.06.040. SET BOLT - M6X1X40 - 8.8 1

93
TITLE: - RAIN CAP FOR EXHAUST FOR
GROUP: - F6.779.21
160 KVA

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

RAIN CAP FOR EXHAUST FOR
1 F6.779.21.0.00 1
160 KVA

94
TITLE: - ROCKER COVER FOR SHANTI GROUP: - 6H.222

13

14
2 8
4
12 3

14

15
6
10 5
11

9
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.222.10.0.00 ROCKER COVER ASSEMBLY 1 OF SR. NO. 2
TO 11
ROCKER COVER (ALLUMINIUM -
2 6H.222.01.0.00 1
SHANTI)
3 6H.024.10.0.PR ADAPTOR (FOR BREATHER PIPE) 1
4 6H.024.11.0.00 JOINT (ADAPTOR FOR BREATHER) 1
5 50.002.08.055. SET BOLT - M8X1.25X55 - 8.8 3
6 50.506.08.000. PLAIN MACHINED WASHER - M8 3
7 6H.013.05.0.00 DEFLECTOR PLATE 2
NOT SUPPLIED
8 6H.013.04.0.00 BREATHER TUBE 1 LOOSE
P K DRIVE SCREW 1/8"X3/8"
9 10.046.02.0.00 12
(RIVET)
BRACKET FOR BRETHER
10 6H.024.07.0.00 1
EXTENSION PIPE
COVER PLATE FOR ROCKER
11 6H.222.02.0.00 1
COVER
12 50.002.08.095. SET BOLT - M8X1.25X95 - 8.8 6

95
TITLE: - ROCKER COVER FOR SHANTI GROUP: - 6H.222

13

14
2 8
4
12 3

14

15
6
10 5
11

9
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

13 50.002.08.120. SET BOLT - M8X1.25X120 - 8.8 6
14 50.506.08.000. PLAIN MACHINED WASHER - M8 12
15 6H.013.02.0.00 JOINT FOR ROCKER COVER 1

96
TITLE: - SENSOR FOR TEMPERATURE GAUGE GROUP: - 46.065.1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

SENSOR UNIT
1 46.085.02.0.00 1
(FOR ELEC TEMP GAUGE)
2 50.508.11.000. COPPER WASHER (14X18) 1

97
TITLE: - SET OF PART ALONG WITH KG545
GROUP: - DV2.852
UNIT

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

GENERATOR CONTROL UNIT
1 DV0.901.13.0.00 1
LEVEL-2 KG545

98
TITLE: - SILENCER NELSON MAKE HOSPITAL
GRADE FOR 100 AND 125 KVA GROUP: - 6H.352.01
(NELSON PART NO 43440F))

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

SILENCER NELSON MAKE
HOSPITAL GRADE FOR 100 AND
1 6H.352.01.0.00 1
125 KVA (NELSON PART NO
43440F)

99
TITLE: - SPIN ON FUEL FILTER
GROUP: - 3H.132
(MICO NO F002 H20 116)

5
6
6 4
5

4
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
SPIN ON FUEL FILTER (TWIN
*1 3H.132.10.0.00 1 OF SR. NO.
BOWL, 0.6 LIT.) 2 TO 4
2 3H.132.01.0.00 PRIMARY ELEMENT 1
3 3H.132.02.0.00 SECONDARY ELEMENT 1
4 3H.132.03.0.00 SEALING RING (FUEL FILTER) 2
5 50.504.04.000. BANJO BOLT - M14X1.5 2
6 50.508.12.000. COPPER WASHER (14X20) 4

100
TITLE: - STARTER MOTOR MICO MAKE 12V,
GROUP: - 6H.675
3KW, TYPE DE114X2012 V R(3KW) FOR 6R 1040.

1
5

6
2
3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

STARTER MICO MAKE 12V, 3KW ,
1 6H.675.01.0.00 1
TYPE-DE114X20 12V R (3KW)
2 50.003.10.030. SET SCREW - M10X1.5X30 - 8.8 3
3 50.505.10.000. SPRING WASHER - M10 3
4 50.506.10.000. PLAIN MACHINED WASHER - M10 3
5 24.083.01.0.00 RUBBER SLEEVE (20DIA) 1
6 22.118.01.0.00 RUBBER SLEEVE(12DIA) 1

101
TITLE: - SUCTION TUBE FOR 6K1080 TA
GROUP: - 6H.986
(160KVA)

1
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.986.30.0.00 SUB ASM OF SUCTION TUBE 1
2 6H.986.05.0.00 JOINT FOR SUCTION FLANGE 1
3 6H.986.08.0.00 CLAMP STRIP 1

102
TITLE: - THERMOSTAT AND MNTG.
GROUP: - 4H.096
(UPWORD OPENING)

3
6
14
7

13

14
4
2 5

10
9 11
8

12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
THERMOSTAT & HOUSING
*1 4H.096.10.0.00 1 OF SR. NO.
ASSEMBLY (UPWORD OPENING) 2 TO 9
THERMOSTAT HOUSING M14 TAP
2 4H.053.01.0.00 1
BOTH SIDES
THERMOSTAT ELEMENT(74 DEG) -
3 39.040.09.0.00 1
WTIL NO.DEV358
JOINT FOR THERMOSTAT COVER
4 4H.053.08.0.00 1
(METTALIC)
5 4H.096.03.0.00 THERMOSTAT COVER, TOP OPEN 1
6 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 4
7 50.506.08.000. PLAIN MACHINED WASHER - M8 4
8 50.602.14.000. PLUG (M14X1.5) 1
9 50.508.11.000. COPPER WASHER (14X18) 1
10 50.003.08.040. SET SCREW - M8X1.25X40 - 8.8 4
11 50.506.08.000. PLAIN MACHINED WASHER - M8 4
JOINT FOR THERMOSTAT
12 4H.053.11.0.00 1
HOUSING
13 4H.023.02.0.00 THERMOSTAT BYPASS HOSE 1

103
TITLE: - THERMOSTAT AND MNTG.
GROUP: - 4H.096
(UPWORD OPENING)

3
6
14
7

13

14
4
2 5

10
9 11
8

12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

WORM DRIVE CLAMP ( JUPITOR
14 2H.112.02.0.00 2
JW7B13, 29 TO 45 DIA)

104
TITLE: - TURBO LUB OIL PIPING (K26) GROUP: - 6H.034

4
5
5
1
2 4

3
12
8
13

12

6 5
11 10
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.034.04.0.00 L.O.INLET PIPE(FOR K24 TURBO) 1
2 4H.132.02.0.00 ADAPTOR (TURBOCHARGER SIDE) 1
JOINT FOR ADAPTOR (TURBO
3 4H.132.27.0.00 1
SIDE)
4 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 4
5 50.506.08.000. PLAIN MACHINED WASHER - M8 6
6 6H.034.03.0.00 ADAPTOR FOR OIL PIPE 1
7 50.508.14.000. COPPER WASHER (16X22) 1
8 6H.034.05.0.00 L.O. DRAIN PIPE(FOR K26 TURBO) 1
ADAPTOR ASSEMBLY FOR TURBO
9 4H.132.13.0.00 1
DRAIN ( CRANKCASE SIDE )
10 50.002.08.045. SET BOLT - M8X1.25X45 - 8.8 2
JOINT FOR ADAPTOR CRANKCASE
11 4H.132.31.0.00 1
SIDE
HOSE CLIP (30 MM) For 48.019.02.0.00,
12 50.519.06.000. 2
40.149.02.0.00
HOSE STRAIGHT 70 MM LENGTH
13 4H.366.07.0.00 WITH CENTRAL HUMP
1

105
TITLE: - TURBOCHARGER AND MOUNTING GROUP: - 6H.391

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

TURBOCHARGER(FOR 6K-140 KVA
1 6H.391.10.0.00 1
ENGINE) K27 2964 MXA 10.21
2 6H.029.01.0.00 JOINT SS (FOR TURBOCHARGER) 1

106
TITLE: -VALVE ROCKER ASSEMBLY GROUP: - 6H.012

5 4
9
21 17
16
22 13 8
20 10
7
12

7
8 6
18
11
24 24
19 23 5
23
24 4
24

25

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ROCKER SHAFT ASSLY.
*1 6H.012.10.0.00 1 OF SR. NO.
(COMPLETE) 2 & 23 TO 25
CONSISTING
*2 6H.012.20.0.00 ROCKER SHAFT SUB ASSLY. 2 OF SR. NO. 3,
7 TO 14 & 22
CONSISTING
VALVE ROCKER SHAFT
*3 3H.010.20.0.00 1 OF SR. NO.
SUB ASSLY. 4 TO 6
4 3H.010.01.0.00 ROCKER SHAFT 1
SOCKET HEAD
5 50.022.12.010. 2
GRUB SCREW - M12X10
6 4H.008.04.0.00 GROOVED SOCKET PIN 1
7 2H.022.04.0.00 WASHER (FOR ROCKER ARM) 2
8 50.513.15.000. E TYPE CIRCLIP-EXTERNAL (15 DIA.) 2
9 2H.022.03.0.00 SPRING FOR ROCKER SHAFT. 2
10 2H.022.01.0.00 ROCKER SUPPORT (FINISH)(FWE) 1
11 2H.022.06.0.00 OIL METERING ORIFICE 1
12 2H.022.02.0.00 ROCKER SUPPORT (FINISH) 2
13 50.003.08.030. SET SCREW - M8X1.25X30 - 8.8 2

107
TITLE: -VALVE ROCKER ASSEMBLY GROUP: - 6H.012

5 4
9
21 17
16
22 13 8
20 10
7
12

7
8 6
18
11
24 24
19 23 5
23
24 4
24

25

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*14 02.024.20.0.00 VALVE ROCKER ASSLY 6 OF SR. NO.
15 & 18 TO 21
CONSISTING
OF SR. NO.
ROCKER ARM SUB ASSEMBLY
*15 02.024.23.0.00 1 16 & 17
(WITH VR BUSH) NOT SUPPLIED
LOOSE
NOT SUPPLIED
16 02.024.11.0.00 ROCKER ARM 1
LOOSE
NOT SUPPLIED
17 02.024.12.9.00 V.R. BUSH (SEMI FINISH) 1
LOOSE
NOT SUPPLIED
18 02.024.15.0.00 V.R.TOE 1 LOOSE
19 02.024.13.0.00 ROCKER-ARM ADJ. SCREW 1
20 02.024.27.0.00 NUT FOR ROCKER ADJ.SCREW 1
21 02.024.14.0.00 OIL METERING SCREW 1
22 F6.007.13.0.00 WASHER 10
23 6H.012.02.0.00 BANJO BOLT 2
24 50.508.10.000. COPPER WASHER (12X18) 4
25 6H.012.03.0.00 ASSEMBLY OF ADAPTOR & PIPE 1

108
TITLE: - VENT CONNECTIONS FOR 6K
GROUP: - 4H.1712.7
ENGINES (FITTED ON ENGINE)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.1712.11.0.00 VENT PIPE FOR RADIATOR 1
2 06.610.04.0.00 WIRE HOSE CLIP (S/F 16 MM PIPE) 2

109
TITLE: - VENT CONNECTIONS FOR 6K
GROUP: - 4H.1712.8
ENGINES (LOOSE WITH ENGINE)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.225.11.0.00 ADAPTOR FOR VENT PIPE 1
2 50.508.12.000. COPPER WASHER (14X20) 1

110
TITLE: - WATER PUMP (282.5 CRS) GROUP: - 4H.052

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.052.12.0.00 JOINT FOR DELIVERY VOLUTE 1
2 4H.052.40.0.00 WATER PUMP SUB ASSEMBLY 1
3 50.002.10.060. SET BOLT - M10X1.5X60 - 8.8 3
4 50.002.10.070. SET BOLT - M10X1.5X70 - 8.8 2
5 50.506.10.000. PLAIN MACHINED WASHER - M10 5

111
TITLE: - WATER PUMP PULLEY & FASTENERS GROUP: - 4H.1483.12

2
1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

SOCKET HEAD SCREW -
1 50.011.08.020. 4
M8X1.25X20 - 8.8
2 50.506.08.000. PLAIN MACHINED WASHER - M8 4
WATER PUMP PULLEY FOR 100
3 4H.1483.11.0.00 1
P.C.D

112
TITLE: - WATRE IN OUT CONNECTIONS GROUP: - 6H.477.3

4 5

4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

HOSE (PIPE TO WATER PUMP)
1 4H.073.02.0.00 1
(45X45X80L)
2 50.002.08.075. SET BOLT - M8X1.25X75 - 8.8 2
3 50.506.08.000. PLAIN MACHINED WASHER - M8 2
4 30.650.04.0.00 HOSE CLIP (S.S.60 DIA.) 2
5 4H.073.04.0.00 UPPER CLAMP FOR PIPE 1
LOWER CLAMP FOR NEW GEAR
6 6H.504.11.0.00 1
CASING (6H.972)
7 4H.405.01.0.00 PIPE (RADIATOR TO PUMP INLET) 1

113
TITLE: -SET OF JOINTS, COPPER WASHERS &
GROUP: -
'O' RINGS (6H.5255)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.1200.23.0.00 SET OF JOINTS 1 OF SR. NO. 2
TO 27
*2 2H.013.11.0.00 JOINT FOR DELIVERY BODY 1
*3 34.016.21.0.00 JOINT FOR FUEL PUMP 1
*4 3H.015.11.0.00 JOINT FOR AIR INLET MANIFOLD 2
JOINT FOR COVER PLATE
*5 3H.039.05.0.00 (FOR FRONT COVER, 1
COMPRESSOR MOUNTING)
JOINT FOR OIL FILLING
*6 3H.042.03.0.00 1
BODY (ARMSTRONG TS13)
JOINT FOR BEARING
*7 4H.052.11.0.00 1
HOUSING (282.5 CRS)
*8 4H.052.12.0.00 JOINT FOR DELIVERY VOLUTE 1
JOINT FOR THERMOSTAT
*9 4H.053.08.0.00 1
COVER (METTALIC)
JOINT FOR THERMOSTAT
*10 4H.053.11.0.00 1
HOUSING
JOINT FOR ADAPTOR
*11 4H.132.27.0.00 1
(TURBO SIDE)

114
TITLE: -SET OF JOINTS, COPPER WASHERS &
GROUP: -
'O' RINGS (6H.5255)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

JOINT FOR ADAPTOR CRANKCASE
*12 4H.132.31.0.00 1
SIDE
GASKET (FOR CYL.HEAD)-1.22 MM
*13 6H.007.06.0.00 1
THK.
*14 6H.013.02.0.00 JOINT FOR ROCKER COVER 1
*15 6H.014.11.0.00 JOINT FOR HEADER 1
JOINT FOR CENTRIFUGAL FILTER
*16 6H.021.11.0.00 1
ADAPTOR
*17 6H.024.11.0.00 JOINT (ADAPTOR FOR BREATHER) 1
*18 6H.026.02.0.00 SS JOINT FOR TURBO OUTLET 1
*19 6H.029.01.0.00 JOINT SS (FOR TURBOCHARGER) 1
*20 6H.058.02.0.00 JOINT FOR AIR PIPE 2
*21 6H.225.02.0.00 JOINT FOR GEAR CASING 1
*22 6H.352.02.0.00 JOINT FOR EXHAUST SILENCER 2
*23 6H.986.05.0.00 JOINT FOR SUCTION FLANGE 1
*24 F6.024.75.0.00 JOINT FOR GLACIER FILTER 1
*25 F6.036.11.0.00 JOINT FOR LUB OIL COOLER 1
*26 F6.503.02.0.00 S.S.JOINT(4") 2

115
TITLE: -SET OF JOINTS, COPPER WASHERS &
GROUP: -
'O' RINGS (6H.5255)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

S.S. JOINT FOR EXHAUST
*27 P2.106.01.0.00 6
MANIFOLD
CONSISTING
*28 6H.1200.24.0.00 SET OF COPPER WASHERS 1 OF SR. NO. 29
TO 41
*29 50.508.05.000. COPPER WASHER (8X12) 12
*30 50.508.07.000. COPPER WASHER (10X14) 4
*31 50.508.08.000. COPPER WASHER (10X16) 1
*32 50.508.10.000. COPPER WASHER (12X18) 5
*33 50.508.11.000. COPPER WASHER (14X18) 2
*34 50.508.12.000. COPPER WASHER (14X20) 21
*35 50.508.14.000. COPPER WASHER (16X22) 3
*36 50.508.15.000. COPPER WASHER (17X23) 1
*37 50.508.16.000. COPPER WASHER (18X22) 1
*38 50.508.17.000. COPPER WASHER (18X24) 3
*39 50.508.18.000. COPPER WASHER (20X24) 2
*40 50.508.23.000. COPPER WASHER (22X27) 1

116
TITLE: -SET OF JOINTS, COPPER WASHERS &
GROUP: -
'O' RINGS (6H.5255)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

*41 50.508.29.000. COPPER WASHER (26X32) 5
CONSISTING
*42 6H.522.53.0.00 SET OF 'O' RINGS 1 OF SR. NO. 43
TO 50
O RING - DIPSTICK (2X5,21515 OR
*43 03.036.01.0.00 3
21511)
*44 2H.008.07.0.00 O RING (FOR CYL.LINER) 12
O RING FOR CYLINDER LINER
*45 2H.008.11.0.00 6
(VITON MATERIAL)
*46 2H.014.02.0.00 O RING(FOR DELIVERY TUBE) 2
*47 3H.009.11.0.00 O RING FOR NOZZLE 6
*48 3H.132.03.0.00 SEALING RING (FUEL FILTER) 2
*49 6H.985.06.0.00 O RING 1
*50 F6.024.47.0.00 O - RING FOR DRAIN PLUG 4

117
TITLE: - SET OF BEARINGS (HA 06 & TC & 6H & TC)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

SET OF MAIN BEARINGS
*1 M.075.4.00.003 MAIN BEARING HA6 & TC 1 (7 PAIRS) STD.
*2 M.075.4.00.013 MAIN BEARING HA6 & TC 1 0.25mm U/S
*3 M.075.4.00.023 MAIN BEARING HA6 & TC 1 0.50mm U/S
*4 M.075.4.00.033 MAIN BEARING HA6 & TC 1 0.75mm U/S
*5 M.075.4.00.043 MAIN BEARING HA6 & TC 1 1.00mm U/S
*6 M.075.4.00.053 MAIN BEARING HA6 & TC 1 1.25mm U/S
*7 M.075.4.00.063 MAIN BEARING HA6 & TC 1 1.50mm U/S
SET OF CONROD BEARINGS
*8 B.075.4.00.003 CONROD BEARING HA6 & TC 1 (6 PAIRS) STD.
*9 B.075.4.00.013 CONROD BEARING HA6 & TC 1 0.25mm U/S
*10 B.075.4.00.023 CONROD BEARING HA6 & TC 1 0.50mm U/S
*11 B.075.4.00.033 CONROD BEARING HA6 & TC 1 0.75mm U/S
*12 B.075.4.00.043 CONROD BEARING HA6 & TC 1 1.00mm U/S
*13 B.075.4.00.053 CONROD BEARING HA6 & TC 1 1.25mm U/S
*14 B.075.4.00.063 CONROD BEARING HA6 & TC 1 1.50mm U/S
SET OF THRUST WASHERS
THRUST WASHER SET KHD
*15 W.073.7.00.003 1 ONE SET
(2 TOP+ 2 BOTTOM)- 4 N0S)

118