Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    High Density Polyethylene: Melt - 7.0

    Uploaded by

    Plastex Ecuador
    HI-752 is a high density polyethylene designed for injection molding applications requiring good balance of mechanical properties. It has a density of 0.952 g/cm3 and melt flow rate of 7.0 g/10 min. HI-752 complies with FDA regulations for use in food contact and has an ESCR of 10 hours, tensile strength of 4000 psi, and HDT of 167°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    High Density Polyethylene: Melt - 7.0

    Uploaded by

    Plastex Ecuador
    43 views1 page
    HI-752 is a high density polyethylene designed for injection molding applications requiring good balance of mechanical properties. It has a density of 0.952 g/cm3 and melt flow rate of 7.0 g/10 min. HI-752 complies with FDA regulations for use in food contact and has an ESCR of 10 hours, tensile strength of 4000 psi, and HDT of 167°F.

    Original Title

    Certene HI752 (2)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    HI-752 is a high density polyethylene designed for injection molding applications requiring good balance of mechanical properties. It has a density of 0.952 g/cm3 and melt flow rate of 7.0 g/10 min. HI-752 complies with FDA regulations for use in food contact and has an ESCR of 10 hours, tensile strength of 4000 psi, and HDT of 167°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views1 page

    High Density Polyethylene: Melt - 7.0

    Uploaded by

    Plastex Ecuador
    HI-752 is a high density polyethylene designed for injection molding applications requiring good balance of mechanical properties. It has a density of 0.952 g/cm3 and melt flow rate of 7.0 g/10 min. HI-752 complies with FDA regulations for use in food contact and has an ESCR of 10 hours, tensile strength of 4000 psi, and HDT of 167°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    HI-752

    High Density Polyethylene

    MELT - 7.0 HI-752 is a certified prime copolymer designed for INJECTION MOLDING applications re-
    quiring good balance of mechanical properties. HI-752 is not UV stabilized. Recommend-
    ed processing temperature is 210 to 250°C with mold at 20 to 40°C. HI-752 complies with
    FDA regulation 21CFR 177.1520(c) 3.1(a) + 3.2(a) and with most international regulations
    DENSITY - 0.952 concerning the use of Polyethylene in contact with food articles.

    Features: PROPERTIES ASTM UNIT VALUES


    PHYSICAL
    • Good dimensional stability Density D1505 g/cm3 0.952
    • Good impact resistance
    • Good processability, stiffness, toughness Melt Flow Rate (190°C, 2.16kg) D1238 g/10 min 7.0
    • High density
    ESCR (122°F, 0.0689 in., 100 lgepal, Comp
    • Low temperature impact resistance D1693B hr 10
    Mold F50) Notched bent strip
    • Warp resistant
    MECHANICAL (Compression Molded)
    Typical Applications: Tensile Strength (Yield, 2.0 in/min) D638 psi 4000

    Tensile Elongation (Break, 2.0 in/min) D638 % 1000


    • Pails
    • Waste bins Flexural Modulus- 1% Secant (0.051 in/min) D790 psi 160k
    • Bottle and fish crates Tensile Impact Strength- Comp Molded D1822 ft-lb/in2 27
    • Tote bins
    • Fruit and vegetable trays HDT (66psi, Unannealed) D648 °F 167
    • Handling materials where resistance to Brittleness Temperature D746 °F -130
    low temperature impact toughness is
    required Vicat Softening Temperature D1525 °F 264

    The technical information, suggested uses and applications presented are made without charge and are believed to be reliable; however, the Ravago Group* disclaims responsibility for reliance and results of use of this information.
    THE RAVAGO GROUP DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, CONCERNING THE PRODUCT(S) DESCRIBED HEREINABOVE, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR
    FITNESS FOR A PARTICULAR PURPOSE. The Ravago Group expressly disclaims any statements or suggestions as being inducement. All users should rely upon their own knowledge and testing in determining product suitability.

    You might also like