da Vinci Jr.1.

0
Ver. 1.6 June 2015
da Vinci Junior 1.0 3D Printer

da Vinci Jr.1.0
User Manual P1
 da Vinci Jr.1.0
Ver. 1.6 June 2015
The purpose of this user manual is to help users understand and use the da Vinci Junior 1.0 3D printer correctly. It
contains the operating instructions, maintenance information and application skills of the da Vinci Junior 1.0 3D printer.
To learn more about the latest news of the da Vinci Junior 1.0 3D printer, please contact local dealers or visit the official
website of XYZprinting: http://www.xyzprinting.com
Trademarks
All trademarks and registered trademarks are the property of their respective owners.
Print History
New editions of this manual incorporate new and changed material different from previous editions. Minor corrections
and updates may be incorporated into reprints of the current edition without releasing additional announcements or
documentation regarding the updated version. The User Manual is for user reference only. If you need to obtain the
latest information, you are welcomed to visit the XYZprinting website: www.xyzprinting.com

1 Before using this printer, please first remove 2 Before launching XYZscan/XYZware, connect your PC
the fixed materials from the printing module and to the printer using the USB cable. For a better user
printing bed. Switching on the printer's power experience, it is strongly advised to follow the proper
without removing these fixed materials may procedure for using the product.
damage the machine.

3
3 Registering your printer via XYZware before
your first print is strongly recommended. When
registered with XYZprinitng, you will receive the 4 Before you start printing, please affix the bed tape on the print
latest technical support and updates. To register, bed. The bed tape may be removed after printing is complete.
simply click "Register Now" to begin. (Bed tape can be reused.)
5 You may use XYZware to initiate manual updates to the printer
firmware and software. When using the printer for the first time,
we recommend connecting to your internet and performing an
initial manual update to obtain the latest resources.
6 The optimal room temperature for printing is 15-32 ◦C (60-
90 ◦F). Printing quality may be affected if room temperature is
higher or lower.
7 If you need more detailed technical support and program
resources, visit the website: http://support.xyzprinting.com/
global_en/Support
8 Before operating the printer, insert the SD card in the SD
5 8
card port to make sure that the printing program is able to run
properly.
Please carefully read the contents of the product
instruction manual before using this product.

Important Notice P2
 da Vinci Jr.1.0
Ver. 1.6 June 2015
Product Overview
A
A: Filament movement area
B: Feed module
C: Print head
D: Filament
B
E: Print bed
C
F
F: SD card port
D (Storage format: FAT32)
G: Control and display panel
E H: Front cover

G USB Port
H
Power Connector

Accessory Checklist Power Switch

．Guide tube ．Cleaning Wire x 5 ．USB Wire ．Bed Tape X 3pcs ．Filament spool axle ring

．Cleaning Brush ．Scraper ．SD Card ．Power Adapter ．Power Cord ．Bundled filament

Important Maintenance Tips

• The maintenance tools provided should be only handled by an adult. Please keep the tools away
from children.
• Store the gear cleaning brush properly. This tool shall only be used to clean the specified parts of the
machine and should not be used for the cleaning of other parts to prevent damaging the machine.
• The scraper is used to remove the object from the print bed when the printing has finished.
The bed tape is reusable and it can be replaced when it has worn out.

Important Safety Instruction

• Do not place printer in humid or dusty environments such as bathrooms and high traffic areas.
• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or
tumble and it may cause serious injury.
• Please keep the front door closed during printing to avoid injury.
• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.

P3
 da Vinci Jr.1.0
Ver. 1.6 June 2015

1 Open the box and remove 2 Remove the plastic bag 3 Raise the paper cardboard slightly upwards
the accessories and and the tapes. so that the paper cardboard is detached from
cushions. the styrofoam slot at the bottom.

4 Raise the paper cardboard slightly upwards so 5 Remove 2 foams at the back of the cardboard.
that the paper cardboard is detached from the
styrofoam slot at the bottom.

6 Remove the securing styrofoam next to the print bed.

7 Insert the SD card that came with the printer into h USB cable
8 Use the bl to connect the
h printer
i to PC.
your computer or download the latest XYZware from Connect the power cord to the printer then turn on
the official Website and install it on the computer. the power switch.
Note: please use the original power adapter and power cord along with the printer in order to
prevent product damage or safety hazards caused by differences in voltage specifications.

Unpacking the Product P4

 da Vinci Jr.1.0
Ver. 1.6 June 2015

Note: Please follow these steps and ensure that the guide tube is properly installed before
starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt filament feed.

．Guide tude
．X axis

1 Before installing the guide tube, turn off the printer 2 After the extruder has been adjusted, insert the guide
and move the extruder to the far left-end of the tube into the extruder.
X-axis. If not done otherwise, the print quality will
be affected.

3 Direct the guide tube from the tube movement area 4 Ensure that the guide tube has been tightly
out of the machine and then insert the other end of inserted into the port to complete the guide tube
the filament tube into the feed module tube port. installation process.

Reminder: If you are not too sure where the feed module tube port is,
you may open the casing of the machine to see the indication label.

Installing the Accessories P5

 da Vinci Jr.1.0
Ver. 1.6 June 2015
CHANGE SPOOL

1 First retrieve filament spool to install the filament 2 Take out and separate the filament spool
spool axle ring. axle ring into its two components.

3 Install the sensor chip. Please pay special attention to 4 Insert the filament spool axle ring components
the position of the installation holes on the chip. to either side of the filament spool, and use a
cruciform screwdriver to tighten and secure the
rings to the axle to complete the installation of
the filament spool axle rings.

5 Place the assembled filament spool (with the spool axle 6 Pull out a section of the filament and insert it into the
rings) on the filament holder on the left side of the printer. feed port.
Caution: Pay attention to the direction the
filament is being pulled out and ensure that the
filament spool axle is being rotated in the correct
manner.

7 Open the release arm and push the filament all the way
to the bottom so that the front end of the filament is
completely inserted into the feed module.

Load Filament P6
 da Vinci Jr.1.0
Ver. 1.6 June 2015

LOAD FILAMENT
Then load filament using the control panel on the printer…

DA VINCI 　Jr. 1 UTILITIES CHANGE SPOOL

UTILITIES CHANGE SPOOL LOAD FILAMENT
SETTINGS HOME AXES UNLOAD FILAMENT
INFO JOG MODE

1 Select "UTILITIES" > "CHANGE SPOOL" > "LOAD FILAMENT".

LOAD FILAMENT LOADING CHECK FILAMENT

EXTRUDER HEATING OUT FROM NOZZLE
TEMPERATURE 210 ∘ C [ ＜　]　TO RETRY
　

PLEASE WAIT PLEASE WAIT [ OK ]　TO RETURN

2 Wait for the extruder to heat up and load 3 Check if the nozzle outputs filament and
filament. press "OK" to go back to main menu.

UNLOAD FILAMENT

First unload filament using the control panel on the printer…

DA VINCI 　Jr. 1 UTILITIES CHANGE SPOOL

BUILD FROM CARD CHANGE SPOOL LOAD FILAMENT
UTILITIES HOME AXES UNLOAD FILAMENT
SETTINGS JOG MODE

1 Select "UTILITIES" > "CHANGE SPOOL" > "UNLOAD FILAMENT".

LOAD FILAMENT UNLOADING

EXTRUDER HEATING PLEASE WAIT
TEMPERATURE 210 ∘ C
PLEASE WAIT [ OK ] TO RETURN

2 Wait for the extruder to heat up and unload filament. Press "OK" to pull out filament.

When finishing "UNLOAD FILAMENT"

First open the release arm and then pull out the filament
with spool axle rings. Arrange it properly for later use.

Note: Always implement the "UNLOAD FILAMENT" function when replacing

the cartridge in order to ensure proper removal of the filament. Cutting
filament too closely to the print head may result in residual filament
blocking and causing damage to your print head.

Unload Filament P7
 da Vinci Jr.1.0
Ver. 1.6 June 2015

The troubleshooting instruction may guide you to fix the problem. If any error persists, please contact services. When
an error occurs, please refer to the service code shown on the printer and/or in the software, and check the suggestions
below for troubleshooting.
Technical Support
Website: http://support.xyzprinting.com
Email: US - supportus@xyzprinting.com
EU - supporteu@xyzprinting.com
Other regions - support@xyzprinting.com

Service Code Symptom Action

0007 Cartridge 1 chip error Reinstall the cartridge or change a new cartridge.

0008 Cartridge 1 chip error Reinstall the cartridge or change a new cartridge.

0014 Extruder 1 heating problem Check connections, reboot the printer.

0028 Cartridge 1 not installed Install/reinstall cartridge.

0029 Cartridge 1 chip error Replace cartridge 1 before printing.

0030 X-axis movement abnormalities Check motor/sensor connections.Check sensor position.

0031 Y-axis movement abnormalities Check motor/sensor connections.Check sensor position.

0032 Z-axis movement abnormalities Check motor/sensor connections.Check sensor position.

0050 Internal communication error Reboot the printer.

0051 Internal communication error Reboot the printer.

0052 Extruder storage error Replace the extruder.

Please reinstall the extruder and reconnect the flat cable,
0057 Unable to detect extruder then restart the printer.

Error message Action

The printer is handling other task Try again after all tasks are completed. Also check the information shown on printer display.
Unable to update printer firmware Check Internet connectivity / Update firmware again later.
Filament 1 jammed Unload and reload cartridge 1 and clean the nozzle.
Filament 1 loading problem Unload and reload cartridge 1.
Filament 1 installation problem Reinstall the cartridge 1 or change a new cartridge.
Top cover open Close the top cover.
Filament 1 level low: 30m left Replace cartridge 1 when necessary.
Filament 1 level low: 5m left Replace cartridge 1 immediately.

Note:
Please retain all original packaging material when shipping your product for warranty
purposes. Shipping the printer without its original packaging may cause product damage
during shipment which will result in chargeable service fees

Support Details P8
 da Vinci Jr.1.0
Ver. 1.6 June 2015

da Vinci Jr.1.0 3D Printer

Model Name da Vinci Junior 1.0 3D Printer
Dimensions 16.54 x 16.93 x 14.96 inches （420 x 430 x 380 mm）
Weight 26.46 lbs (12kg)
Display 2.6” FSTN LCM
Language English / Japanese
Connection method USB Wire / SD Card
Print Technology FFF (Fused Filament Fabrication)
Build Volume 5.9 x 5.9 x 5.9 inches （15 x15x15cm）
Print resolution 100 - 400 microns
Print module Single Nozzle
Nozzle diameter 0.4 mm
Filament diameter 1.75 mm
Files supported .stl , XYZ Format(.3w)
Operating system Windows 7 - 8 above (for PC)
Mac OSX 10.8 64-bit above (for Mac)
Hardware X86 32/64-bit compatible PCs with 2GB+ DRAM (for PC)
requirement X86 64-bit compatible Macs with 2GB+ DRAM (for Mac)

Environmentally friendly materials-PLA

PLA filaments are made using polymerized lactic acid, which is extracted from corn, sugarcane or other sugar-
containing crops, and is regarded as the most environmentally friendly 3D printing material. Unwanted PLA printed
objects can be simply discarded in the soil where it will naturally decompose.

PLA materials printed at low temperatures are not only suitable for family settings, its bright texture also makes it a
favorite amongst our clients. You may observe the characteristics
ch of PLA during printing.

• Despite their harmlessness, PLA placed in an environment or water bath exceeding 50 oC (122 oF) will soften and deform.
• Hence, overly humid areas are not suitable storage environments for PLA. We recommend properly sealing and
stashing away unused PLA filaments.
• A sugary smell is often generated when printing with PLA filaments, giving yet another attractive feature.

Specifications P9
 da Vinci Jr.1.0
Ver. 1.6 June 2015
About the da Vinci junior series 3D printer
The da Vinci junior series 3D printer (da Vinci Jr.) is a brand new product from XYZprinting that is dedicated to the 3D
printer market. Its intricate and colorful exterior as well as its high resolution printing specifications are set to make it
the new favorite for families and home hobbyists. Whether you’re creating an enjoyable learning playground to inspire
your children’s creativity or you’re rapid prototyping your innovative ideas

Present creativity
To learn more about presenting your
creativity, please visit the Gallery section
of XYZprinting's official website.

Product features
• Environmentally friendly 3D printer that satisfies the WEEE recycling requirements, and utilizes the environmentally friendly PLA
filaments for printing.
• Satisfies electrical appliance safety specifications of the EU and many other countries, making it the best home-based 3D printer
for the entire family.
• Detachable SD card that allows you to store 3D model files that you have created and edited for easy printing.
(Please export .stl files into .3w format via XYZware before printing.)
• A gallery of 3D objects is available for download after free registration.
• Amazing power saving design with a maximum power consumption of 75W, offering low power usage even for extended use.
• Weighs only 12 kg, and can be easily integrated into any household or family setting.
• Cooling fans within the machine are designed for smart temperature control and are able to adjust and optimize printing
temperature to improve product quality.

Introduction P 10
 da Vinci Jr.1.0
Ver. 1.6 June 2015
Button instructions
After switching on the printer's power, the user may use the display panel at the front of the printer to understand its
status and usage data. The functional buttons on the right allow the user to perform the relevant operations.

Button Functions
Up Direction Up
Down Direction Down
Left Back to previous menu / Reduce the adjustment value
Right Forward to submenu / Increase the adjustment value
OK OK; confirm selection/settings
HOME Home Button, return to main menu

Function Description
UTILITIES Printer adjustment / Change filament / Sample printing

SETTINGS The parameters of printer

INFO The firmware and printer statistical information

MONITOR MODE Monitors extruder and print bed working temperature and printing progress

DA VINCI 　Jr. 1
BUILD FROM CARD
UTILITIES
SETTINGS

Functions P 11
 da Vinci Jr.1.0
Ver. 1.6 June 2015

Home Menu Top Menu Sub Menu Page

CHANGE SPOOL P6
LOAD FILAMENT P7
UNLOAD FILAMENT P7

HOME AXES P13

UTILITIES
JOG MODE P13

BUILD FROM CARD P13

CLEAN NOZZLE P14

Z OFFSET P14

BUZZER P15

LANGUAGE P15
SETTINGS
ENERGY SAVE P15

RESTORE DEFAULT P15

STATISTICS P16

SYSTEM VERSION P16

INFO
SPOOL STATS P16

HELP P16
MONITOR MODE P16
The map above shows the functions your may access with the control panel on the printer. For detailed descriptions of each
function, please refer to their respective pages in this user manual.

Maps of Functions P 12
 da Vinci Jr.1.0
Ver. 1.6 June 2015

HOME AXES
“HOME AXES” moves the extruder to the lower left corner.

To home axes:

home axes
are you sure
NO
YES

Select “YES” to proceed.

JOG MODE
“JOG MODE” is used to manually move the extruder and the print bed.
To move the extruder:
jog mode x-axis ok exit
x-axis － ▲ ■ 001mM ▲ ＋
y-axis 010mm
z-axis 020mm

1.Select “X-AXIS” (to move right 2.Select desired increment of travel with and
and left) and "Z-AXIS" (to move up and
buttons, and press (or hold) or button for desired
down). Execute "Home Axes" function first
to move "Z-AXIS". “Y-AXIS” (to move print direction to move the extruder.
bed backwards and forwards).

BUILD FROM CARD

3 sample models are built into the printer. You may begin your first 3D prints with the samples.
To print a sample:

build FROM CARD

demo

1.Select a sample to print 2.Put the bed tape on the print bed.

DEMO
start building
no
yes

4.Remove the printed object when the printing has

3.Select "YES" to start printing finished and the print bed has descended.The bed
tape is reusable and it can be replaced when it's worn.

UTILITIES P 13
 da Vinci Jr.1.0
Ver. 1.6 June 2015
CLEAN NOZZLE
Over time, carbon deposits or filament dust buildup in the nozzle may decrease its performance. It is advised to clean the
nozzle after every 25 hours of printing.
Also, if the print bed calibration shows “ERR” or if there is any residue on your prints, you may try to clean the nozzle.

To clean the nozzle:

CLEAN NOZZLE
ARE YOU SURE ?
NO
YES

1.Select "YES" to begin. 2.Wait until the extruder heats up and moves to the front,
and the screen shows “READY FOR CLEAN”

CLEAN NOZZLE
READY FOR CLEAN

[ OK ] TO RETURN

3.Hold the cleaning wire with the pliers, and carefully pass the 4.Select "OK" to return.
wire through the nozzle openning.

Z OFFSET (adjust the printer module)

The user may use the Z OFFSET function to adjust the gap between the printing nozzle and the printing bed.
Caution: This printer has already been tested and adjusted to the optimal gap between the printing nozzle and printing
bed before shipping. We recommend recording the original settings before carrying out any adjustments.

Z OFFSET settings adjustment

1.The recommended distance between the nozzle and print bed(with bed tape securely fastened) is 0.3mm.
This should allow two sheets of copy paper to be drawn out smoothly but six sheets of copy paper cannot be
passed.
+[^]
Z OFFSET 0.1 mm
─[v]
[OK] TO SAVE

2.Increase/decrease the value based on a scale of 0.1mm.

Increasing the value will increase the gap between the print module and print bed by 0.1mm
Decreasing the value will also decrease the gap between the print module and print bed by 0.1 mm

UTILITIES P 14
 da Vinci Jr.1.0
Ver. 1.6 June 2015

BUZZER
When the buzzer is turned on, the printer will output an audible signal when a button is pressed, print job is finished, or issue is
detected.
Buzzer is turned on by default. To switch off the buzzer:

buzzer on
off
on

Select “OFF” and press “OK” to change the setting.

LANGUAGE
You may switch the display language on the printer between English and Japanese.
The default lanague is English. To switch to Japanese:

language en
english
ニホンゴ

Select “ ニホンゴ "and press “OK” to change the setting.

ENERGY SAVE
LED luminaires are installed in the printing chamber. To save energy consumed, the lighting will go off after idling for 3 minutes (shown
as 03M on the display) by default.
To select a longer time interval:

energy save off

off
03m
06m

Select “06M” (for auto off after 6 minutes) or “OFF” (for never turn off the LED) and press “OK” to change the setting.

RESTORE DEFAULT
All settings can be reset to factory default with a few clicks.
To reset all settings at once:

restore default
are you sure
no
yes

Simply select “YES” and press “OK” to reset.

SETTINGS P 15
 da Vinci Jr.1.0
Ver. 1.6 June 2015
STATISTICS
In “STATISTICS”, you can check the accumulated print time and last print time.
statistics
lifetime 00006h
last time 00h34m
ok to return

SYSTEM VERSION
Firmware version is shown here. For stable printing performance, it is advised to keep the firmware up to date. To
check for firmware updates, please go to XYZware.

system version
1.1.j

ok to return

SPOOL STATS
“SPOOL STATISTICS” provides the information on cartridge level (see REMAINING), and the capacity, color and
material of the filament. Press to read the second page.

SPOOL stats color black

remaining 059m moterial PLA
CAPaCiTY 240m
DOWN NEXT PAGE ok to return

HELP
The URL to XYZprinting website can be found here. You may go to the website for the latest information, product
documents, tutorial video and more.
HELP
WWW.XYZPRINTING.COM

OK TO RETURN

MONITOR MODE
"MONITOR MODE" shows the temperature of the extruder. See below for the working temperature for the parts in
different modes.

MONITOR MODE
EXTRUDER 046 C
OK TO RETURN

INFO P 16
 da Vinci Jr.1.0
Ver. 1.6 June 2015
Note: The machine can be turned off only when the cooling fan of the print head stops running after the print is
completed. Turning off the power directly may clog the print head.

References:
Please refer to CLEAN NOZZLE
to remove the blocks out of the
print head.

This section describes how to clean the feed module. After heavy use of printer, if feeding of material becomes difficult or
impossible, please follow these steps.

Preparation of Tools

A. Cleaning brush that comes with the printer B. Screwdriver (T10) for standard cleaning procedure

A. Quick Cleaning

1 Use the “UNLOAD FILAMENT” function to loosen and 2 Use the cleaning brush to scrub the feed gear back
remove the filament. and forth to remove the chips of filament out of the
gear. Replace the wire after the cleaning is completed.
B. Standard Cleaning

1 Use the screwdriver to remove the screw and open the 2 Press the black rubber fixer on top of hole and pull
top cover. the guide tube out.

3 Use the cleaning brush to scrub the gear; after removing residues of
filament on the gear, you can insert the guide tube and put the cover
back and then enjoy printing again.

Please peruse the product instruction manual before using this product.

Important Notice P 17
 da Vinci Jr.1.0
Other Information Ver. 1.6 June 2015

1. This product is guaranteed against any break down for a specific period of time from date of purchase within the
scope of proper and reasonable usage of their product as defined by XYZprinting
Presentation of warranty card with the product will ensure free service and repair of inherent faults in the product
within the warranty period. However, the following items are separate and dealt with under conditions of other
related warranty services:
● Printing modules / printing platforms / motor modules
● Attached consumables (including housing, packing materials, power cords, USB cables, coil consumables, user
manuals and software CD's): no warranty is given.
2. To protect your right and interests, please request that the dealer fill in the product information and purchase date
on the product warranty card, and also make sure that they affix their official seal.
3. Please keep this warranty card in a safe place because if it is lost or destroyed a new one will not be issued.
Make sure to present the card if you require any repairs, service or maintenance to the product during the
warranty period.
4. XYZprinting may levy charges under any of the following circumstances:
● Man-made damages: In the case of damage to the product caused by incorrect use, wrong installation,
abnormal wear, physical damage or deformation caused by falls or blows, burnt circuits resulting from actions
form the user, broken or bent interface or pins or any other physical damage to the product caused by misuse.
● Incompatibility issues: anything unrelated to product malfunctions such as conflicts with electronic equipment,
expectations of use, noise of operation, speed, discomfort or heat.
● Damage caused by force Majeure (such as lightning strike, fire, earthquake, floods, civil disturbance or war or
any other event beyond human control).
● Any request of warranty service after expiration of the warranty period.

If you need warranty service, please contact the original dealer or email us at supportus@xyzprinting.com. If you
need more information about our warranty services, please log in to www.xyzprinting.com, select "support (product
support)" where you will find complete details of all the warranty conditions.

Federal Communications Commission (FCC) Statement

You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
XYZprinting is not responsible for any radio or television interference caused by using other than recommended cables and
connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the
user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of
the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation
instructions and consider removing the no-collocation statement.

Term of Service P 18
 da Vinci Jr.1.0
Ver. 1.6 June 2015

Warning
● Do not let children operate this device without adult supervision. Electric shock hazard. Moving pars can cause serious
injury.
● Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm and/or injury.
Printer may fall or tumble causing harm and/or injury.
● Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to printer damage or
safety risks.
● Do not use flammable chemicals or alcohol wipes to clean this device.
● Do not disassemble or replace the printer cover with none XYZprinter covers.
● Do not touch heated surfaces during or after operation. Heated surfaces can cause severe burns.
● Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.
● Do not attempt to service the printer beyond the instructions specified in this document. In the case of irrecoverable
problem, contact XYZprinting service center or your sales representative.

Warning! P 19