CNC Clamps 2mm To 18mm
CNC Clamps 2mm To 18mm
CNC Clamps 2mm To 18mm
by PatrickH101
Clamps for holding down your workpiece on a cnc The actual foot to hold your workpiece can rotate to
router. The adjust to the thickness of your material.
clamps are designed for holding down materials with
a thickness of 2mm to 18 mm. This clamp can be used on a wasteboard like this: htt
ps://www.youtube.com/watch?v=yhVW6Q9o-34 or on
I designed the clamp using Fusion 360. v-slots with an added drop in t-nut.
There are 4 different sizes for the bolt that goes Supplies:
through, M5, M6 or 1/4 inch and for a special request 1 bolt per clamp M5, M6 or 1/4 inch also the lenght is
M8 (The M8 version is not tested but should work depending on your wasteboard.
though the sliding distance is a lot shorter). 1 washer per clamp
Best is to use a washer on top. In case of v-slots 1 drop in t-nut per clamp
View in 3D Download
https://www.instructables.com/ORIG/FWP/7L5L/K0COXV9H/FWP7L5LK0COXV9H.stl
…
View in 3D Download
https://www.instructables.com/ORIG/FL6/OZGR/K0COXV9J/FL6OZGRK0COXV9J.stl
…
View in 3D Download
https://www.instructables.com/ORIG/F13/S154/K0MP3WA8/F13S154K0MP3WA8.stl
…
View in 3D Download
https://www.instructables.com/ORIG/F9Q/1QDF/K0COXVLY/F9Q1QDFK0COXVLY.stl
…
Thank you !
Thanks !