Automotive Sensor Signal Simulator MNB-3 User's Manual
Automotive Sensor Signal Simulator MNB-3 User's Manual
Automotive Sensor Signal Simulator MNB-3 User's Manual
The MNB-3 host has an expansion socket, which is convenient for adding new
functions.
signal current, and all signal output jacks are added with an overcurrent
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
The accelerator pedal sensor generally has six wires: two ground wires, two 5V
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
If the MNB-3 is plugged in with an external power supply, only two ground
wires and two signal wires need to be connected. If the MNB-3 is not plugged
First, turn the V1 and V2 knobs to adjust the voltage ratio of V1 and V2 of
MNB-3 to 2:1. Then, just turn the V1 knob, the voltages of V1 and V2 will
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
pressure sensor, oil pressure sensor, boost pressure sensor, common rail
pressure sensor, throttle position sensor, air conditioner pressure sensor (voltage
type), etc.
The signal voltage of the voltage sensor is mostly 0-5V, which can be directly
simulated by V1. The sensor has 3 wires: 5V power supply, ground wire GND,
Test method:
Connect the external power supply to the MNB-3, connect the V1 socket to the
sensor signal line, and connect the common ground line GND socket to the
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
sensor ground line. The sensor 5V power supply does not need to be connected.
If the MNB-3 is not plugged into an external power supply, the sensor's 5V
Rotate the V1 knob, the output voltage signal 0-5V changes, (if you need to
simulate multiple voltage sensors at the same time, please purchase expansion
board A separately).
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
There is a thermistor inside the resistance sensor, and the resistance value
The resistance sensor has 2 wires: ground wire GND, and signal wire.
Test method: The instrument host does not need to plug in an external power
supply, the sensor ground wire is connected to the host's public ground wire
GND socket, the sensor signal line is connected to the host resistance analog
output socket, and the potentiometer knob is rotated to change the resistance
If you want to simulate multiple resistance sensors, you can use the V1 voltage
signal to simulate, output a 0-5V voltage signal, and you can directly simulate a
temperature signal.
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
MNB-3 can simulate 4-wire oxygen sensor (5-wire and 6-wire cannot be
simulated temporarily)
The 4 wires of the 4-wire oxygen sensor are: the positive power supply of the
heating wire of the sensor, the control terminal of the heating wire, the signal
Test method:
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
The oxygen sensor output socket of MNB-3 is connected to the sensor signal
line, and the ground line GND is connected to the sensor ground line. MNB-3
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
5. Voltage measurement.
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
7. Use expansion board A to simulate dual throttle sensor signals, one signal
changes from 0-5V, the other signal changes from 5-0V, and the sum of the two
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
The ground wire of the throttle sensor is connected to the ground wire GND of
the expansion board A, and the two signal wires of the sensor are respectively
Plug the expansion board A into the MNB-3 host, plug the MNB-3 into an
external power supply, and turn the adjustment knob to change the signal
voltage.
Brightwin Technology
MNB-3 Auto Sensor Signal Simulator
sensor is connected to the signal terminal of V3, and the ground wire of the
Plug the expansion board A into the MNB-3 host, plug the MNB-3 into an
external power supply, turn the V3 knob, and the V3 signal terminal voltage
Attention: Due to the size limitation, the expansion board A only has LED
indicators, which indicates the signal voltage level through the LED lighting,
and the voltmeter on the host displays the voltage value of the V1\V2 socket,
and does not display the signal voltage of the expansion board.
Brightwin Technology